ABRASIVES INC/BCS INDUSTRIAL BUYERS GUIDE … · 1-1/4 NPS 1-1/4: SB1SAL SB1SBR : ... *Modified NPT threads allow coupling to screw further onto pipe. ... (Compatible with Schmidt

ABRASIVES INC/BCS INDUSTRIAL

BUYERS GUIDE

TABLE OF CONTENTS

This document contains one section of the complete Buyers Guide

AIR BLAST PARTS & ACCESSORIES ............................................................................. SECTION 2

COUPLINGS/NOZZLE HOLDERS ....................................................................................................... 51-55

DEADMEN/REMOTES ...................................................................................................................... 56-60

DRYERS/AFTERCOOLERS ................................................................................................................ 61-66

HOSE ............................................................................................................................................. 67-71

LIGHTS .......................................................................................................................................... 72-75

METERING VALVES ........................................................................................................................ 76-78

MUFFLERS/BLOWDOWN ASSY ........................................................................................................ 79-80

NOZZLES ........................................................................................................................................ 81-87

PIPE BLASTING .................................................................................................................................... 88

SPOT CLEANING .................................................................................................................................. 89

Cou

pler

s /

Noz

zle

Hol

ders

© Abrasives Inc / BCS 2018

800-716-9651 800-584-7524www.abrasivesinc.com

Air Blast Parts & Accessories

51

Tank Couplings, Gaskets and Safety Clips

Size # Size SizeThread

Gasket ID Aluminum Brass Nylon Carbon

SteelStandard Style Item No.

SB-1 1-1/4 1-1/4 NPT* 1-1/4 SB1AL SB1BR N/A SB1PLSB-1S 1-1/4 1-1/4 NPS 1-1/4 SB1SAL SB1SBR SB1SNY SB1SPLSB-2 1-1/2 1-1/2 NPT* 1-1/4 SB2AL SB2BR N/A SB2PL

SB-2S 1-1/2 1-1/2 NPS 1-1/4 N/A N/A SB2SNY N/ASB-5 2 2 NPS 1-1/4 SB5AL N/A N/A N/A

50mm / Full Port Style Item No.SB-3X 1-1/2 1-1/2 NPT* 1-3/4 SB3XAL SB3XBR N/A N/ASB-4X 2" 2" NPT* 1-3/4 SB4XAL SB4XBR N/A N/A

*Modified NPT threads allow coupling to screw further onto pipe.Full Port Style couplings do not fit with Standard Style couplings

Gaskets (for tank and blast hose couplings) Safety Clip

SBG-1 Standard XSC

SBG-2X Full Port Safety Cable - Whip Check

SBG-1U UrethaneStandard

WC-151”- 2-1/2”

(3/16” dia)

WC-21-1/2”- 3”(1/4” dia)

WC-43”- 4”

(3/8” dia)

SBG-3For Nylon

Coupler (same as Clemco 08853)

Standard Style

Full Port Style

Cou

pler

s /

Noz

zle

Hol

ders




52

Air Hose Couplings PLATED DUCTILE IRON - Size Item # GASKETS

3/8” Hose End - 2 lug DPHE-0381/2" Hose End- 2 lug DPHE-0503/4" Hose End- 2 lug DPHE-0751" Hose End- 2 lug DPHE-1001/4" Female NPT- 2 lug DPFE-0253/8" Female NPT- 2 lug DPFE-0381/2" Female NPT- 2 lug DPFE-0503/4" Female NPT- 2 lug DPFE-0751" Female NPT- 2 lug DPFE-1001/4" Male NPT- 2 lug DPME-025

3/8" Male NPT- 2 lug DPME-038

1/2" Male NPT- 2 lug DPME-0503/4" Male NPT- 2 lug DPME-0751" Male NPT- 2 lug DPME-1001-1/4" Hose End - 4 Lug DPHE-1251-1/2" Hose End- 4 Lug DPHE-1502" Hose End- 4 Lug DPHE-200

1-1/4" Female NPT- 4 Lug DPFE-125

1-1/2" Female NPT- 4 Lug DPFE-150

2" Female NPT- 4 Lug DPFE-200

LONG SHANK COUPLING (Swivel Insert used in Pusher Lines)1” ID DPLF-100

GASKETS

XLS-100 1” ID1-1/4” ID DPLF-125 XLS-125 1-1/4” ID1-1/2” ID DPLF-150 XLS-150 1-1/2” ID2” ID DPLF-200 XLS-200 2” ID

DOUBLE BOLT CLAMPS1-7/8 x 2-3/8 DB-607/8 x 1-9/64 DB-291-5/16 x 1-19/32 DB-401-5/8 x 1-15/16 DB-49

BOLT CLAMPSOD Range (1-1/16” to 1-3/16”) 1.0625” to 1.188” 2 Bolt BC-050BOD Range (1-5/16” to 1-1/2”) 1.313” to 1.50” 2 Bolt BC-075BOD Range (1-17/32” to 1-23/32”) 1.625” to 1.844” 4 Bolt BC-100OD Range (2-3/32” to 2-9/32”)1.875” to 1.2.063” 4 Bolt BC-150AOD Range (2-15/32” to 23/32”) 2.468” to 2.719” 4 Bolt BC-150C

PUNCH-LOK CLAMPS

Punch-lok Clamp, P-8, 2” Clamp ID, 5/8” Band Width 035-0322-0102

Punch-lok Clamp, P-10, 2-1/2” Clamp ID, 5/8” Band Width 035-001-0104

UG-2 for 2-Lug fittings

UG-4 for 4-Lug fittings

XSC - Safety Clips

Cou

pler

s /

Noz

zle

Hol

ders




53

Size Item # Description Size Item# Description1/2” GJ050

Complete Set contains Hose Stem, Wing Nut & Female Spud w/female NPT Threads. Plated Ductile Iron

1/2” GJFS-050

Female Spud has female NPT threads. Plated Ductile Iron

3/4” GJ075 3/4” GJFS-0751” GJ100 1” GJFS-100

1-1/4” GJ125 1-1/4” GJFS-1251-1/2” GJ150 1-1/2” GJFS-150

2” GJ200 2” GJSF-2002-1/2” GJ250 2-1/2” GJFS-250

3” GJ300 3” GJFS-300

4” GJ400 4” GJFS-400

Size Item # Description Size Item # Description1/2” GJHS-050

Hose Stem sized for Hose ID. Plated Ductile Iron

1/2” GJMS-050

Male Spud has male NPT threads

3/4” GJHS-075 3/4” GJMS-0751” GJHS-100 1” GJMS-100

1-1/4” GJHS-125 1-1/4” GJMS-1251-1/2” GJHS-150 1-1/2” GJMS-150

2” GJSH-200 2” GJMF-2002-1/2” GJHS-250

3” GJHS-3004” GJHS-400

Size Item # Description Size Item # Description1/2” GJWN-050

Wing Nut connects Hose Stem to Spud. Plated Ductile Iron

1/2” GJDS-050Double Spud connects 2 hoses. All Brass or Plated Ductile Iron w/Brass Insert

3/4” to 1” GJWN-075 3/4”to 1” GJDS-075

1-1/4” to 1-1/2” GJWN-125 1-1/4” to

1-1/2” GJDS-125

2” GJWN-200 2” GJDS-200

2-1/2” GJWN-2503” GJWN-3004” GJWN-400

Wing Nut

Ground Joints

Hose Stem

Female Spud

Male Spud

Double Spud

Complete Set

Air Hose Couplings

Cou

pler

s /

Noz

zle

Hol

ders




54

Blast Hose Couplings

Standard Style

Size # ID Size Full Port Alum Brass Nylon Plated Iron

Hose GasketItem No.

ID OD ID

Q-2X1 (4 ply)

or1-1/4 (2 ply)

1 or

1-1/41-7/8 1-3/4 Q2XAL Q2XBR N/A N/A

Q-3X 1-1/4 1-1/4 2-5/32 1-3/4 Q3XAL Q3XBR N/A N/A

Q-4X 1-1/2 1-1/2 2-3/8 1-3/4 Q4XAL Q4XBR N/A N/A

Q-6X 2 2 2-7/8 1-3/4 Q6XAL Q6XBR N/A N/A

Full Port couplings are extra large and will not connect with standard style.

For gaskets see Tank Coupling page.

50mm / Full Port Style

Size # ID Size Standard Alum Brass Nylon Carbon Steel

Hose GasketItem No.

ID OD ID

Q-05 1/2 1/2 1-3/16 1-1/4 Q05AL Q05BR N/A N/A

Q-1M 3/4 3/4 32mm 1-1/4 N/A N/A Q1MNY Q1MPL

Q-1 3/4 3/4 1-1/2 1-1/4 Q1AL Q1BR Q1NY Q1PL

Q21 (4 ply)

or1-1/4 (2 ply)

1 or

1-1/41-7/8 1-1/4 Q2AL Q2BR Q2NY Q2PL

Q-3 1-1/4 1-1/4 2-5/32 1-1/4 Q3AL Q3BR Q3NY Q3PL

Q-4 1-1/2 1-1/2 2-3/8 1-1/4 Q4AL Q4BR N/A Q4PL

Cou

pler

s /

Noz

zle

Hol

ders




55

Nozzle Holders, Quick Holders and AdaptersStandard Style

Size # ID SizeHose Thread

Size Aluminum Brass NylonID OD

1/2 (2 ply) 1/2 1-1/16 3/4 NPS BCS001-AL BCS001-S (steel) N/A

HE-05 1/2 1/2 1-3/16 3/4 NPS HE05AL HE05BR N/AHE-1 3/4 3/4 1-1/2 1-1/4 NPS HE1AL HE1BR HE1NY

HE-2 1 (4 ply)

or1-1/4 (2 ply)

1or

1-1/41-7/8 1-1/4 NPS HE2AL HE2BR HE2NY

HE-3 1-1/4 1-1/4 2-5/32 1-1/4 NPS HE3AL HE3BR HE3NYHE-4 1-1/2 1-1/2 2-3/8 1-1/4 NPS HE4AL HE4BR N/A

50mm / Full Port Style

MHE-1M 3/4 3/4 32mm 50mm N/A N/A MHE1MNYMHE1 3/4 3/4 1-1/2 50mm MHE1AL MHE1BR MHE1NY

MHE21 (4 ply)

or1-1/4 (2 ply)

1or

1-1/41-7/8 50mm MHE2AL MHE2BR MHE2NY

MHE3 1-1/4 1-1/4 2-5/32 50mm MHE3AL MHE3BR MHE3NY MHE4 1-1/2 1-1/2 2-3/8 50mm MHE4AL MHE4BR N/A

Quick Holders

SB-1S Accepts: 1-1/4” NPS Threaded Nozzle SB1SAL SB1SBR SB1SNY

SBM Accepts: 50mm Threaded Nozzle N/A N/A SBMNY

SBF Accepts: 1-1/2” Flanged Nozzle SBFAL SBFBR

Nozzle Washer /Gasket AdapterFor ½” ID Entry Nozzle 3/4" Thrds 130110 50mm Thread

Adapter Changes

50mm holder to accept

1-1/4”thread nozzle, 2-4-1/2” UNC

Thread

130784

For 1” Entry Nozzle, 1-1/4" Thrds 130112For 50mm Thrd, Wide Entry Nozzle 130102

For 1-1/4” Thrd, Wide Entry Nozzle 130103

Dea

dmen

/R

emot

es




56

Clemco Control Handles

Dea

dmen

/R

emot

es




57

Empire Remote Control Handles

NOTE: The Saf-Stop II is a bleeder style control handle.

Dea

dmen

/R

emot

es




58

Pirate Brand Remote Control Handles - Non OEM

PNEUMATIC REMOTE CONTROL HANDLE(Not for use with steel abrasives)

2263-000PB Handle Control, Pneumatic2263-000-09PB Handle Control, Pneumatic, Repair Kit, in-

cludes #1,2,3,& 45 3031-302-02PB Hex Nipple 1/4” NPT x1/4” w/Ball St6 3031-300-00PB Hex Nipple 1/8” NPT x1/8” w/Ball St

PNEUMATIC REMOTE CONTROL HANDLE #22263-001PB Handle Control, Pneumatic #2

4 2263-001-99PB Handle Control, Pneumatic, Repair Kit, includes #1,2, & 3

5 3031-302-02PB Hex Nipple 1/4” NPT x1/4” w/Ball St6 3031-300-00PB Hex Nipple 1/8” NPT x1/8” w/Ball St

ELECTRIC REMOTE CONTROL HANDLE(Not for use with steel abrasives)

2263-400PB Handle Control, Electric2263-400-01PB Handle Control, Electric with Plug

ELECTRIC REMOTE CONTROL HANDLE #22263-401PB Handle Control, Electric #22263-401-01PB Handle Control, Electric #2 with Plug

2263-401-02PBHandle Control, Electric #2 with Sealed Connector (Required when using steel abrasives)

PB-31131 Connector , 1/2” 3 Part Sealed Control Cord (Required when using steel abrasives)

2263-001-08PB Safety Flap , Control Handle #2, Electric

PNEUMATIC REMOTE CONTROL HANDLE #3(Not for use with steel abrasives)

(Compatible with Schmidt G2)2263-002PB Handle Control, Pneumatic #32263-001-99PB Handle Control, Pneumatic, Repair Kit

Dea

dmen

/R

emot

es




59

Schmidt Deadman Controls

G2 ELECTRIC DEADMAN

2263-402 Deadman, G2 Electric Switch Assy

2263-402-01 Deadman, G2 Electric with Plug

# Item # Description 2263-001 Deadman II Control, Pneumatic

1 Not Available Base2 + 2263-001-02PKG Safety Flap Spring (10 pk)3 + 2263-001-03PKG Lever Hinge Screw (10 pk) 4 2263-001-04PKG Hinge Pin Nut (10 pk)

5*+ 2263-001-05PKG Body Gasket (10 pk) 6*+ Not Available Valve Body Assembly7 Not Available Lever

8 + 2263-001-08PKG Safety Flap (10 pk) 9*+ 2263-001-09PKG Plunger Plug (10 pk)10 Not Available Body Mounting Screw11 2263-001-11PKG Lever Spring (10 pk)

12 + 2263-001-12PKG Flap Hinge Screw (10 pk)13 3031-300-00 Hex Nipple, 1/8” x 1/8” with ball seat14 3031-302-02 Hex Nipple, 1/4” x 1/4” with ball seat

* 2263-001-98 Deadman II Replacement Parts Kit Phase II

+ 2263-001-99 Deadman II Replacement PartsKit Phase I

2263-001-98 2263-001-99

Dea

dmen

/R

emot

es




60

Western Technology Remote Controls

Item # Description

WT1001-REPK Electric Deadman, Repairable, Remote Control Switch (2 wire), includes WT1102 Ball & Chain

WT1001-REP-3K Electric Deadman, Repairable, Remote Control Switch (3 wire), includes WT1102 Ball & Chain

WT1102 Ball & ChainWT3101 Toggle BootWT1001-CAP Red Cap

WT1001-KIT Kit includes: 2 position switch, 4’ of 2 wire control cord with ring lugs installed, terminal screws and assembled jumper.

WT1001-KIT-3 Kit includes: 3 position switch, 4’ of 3 wire control cord with ring lugs installed, terminal screws and assembled jumper.

Item # DescriptionWT1001-4K

Electric Deadman, Sealed, Remote Control Switch (2 wire), with 4’ cord and replaceable toggle switch boot (WT3101). Includes Ball and Chain (WT1102)

WT3101 Toggle Switch BootWT3113-1 Cord Connector - 3 part - Strain Relief 1/2”WT3111 Hose ClampWT1102 Ball & Chain

Item # Description

WT1004-HC Wrist-Ez Repairable Electric Deadman Remote Control Switch - 3 wire (wire is 4ft of 14.2 SOOW)

WT1004-HC-3 Wrist-Ez Repairable Electric Deadman Remote Control Switch - 2 wire (wire is 4ft of 14.2 SOOW)

WTApolloADI 4 Wire Electric Deadman Remote Control Switch, Sealed

Dry

ers

/A

fterC

oole

rs




61

LaMan Extractor/Dryer®

Extractor/Dryer®

The patented Extractor/Dryer is a two-stage, point-of-use compressed air filter. Designed primarily for the final usage of air, it will remove water, oil and other contaminates from compressed air lines. Developed for air driven tools, paint spray-ing, manufacturing equipment or any other compressed air equipment to produce clean, dry, compressed air. In return you receive extended equipment life, improved product quality, reduced downtime, and savings on costly repairs to damaged equipment. These advantages will pay for themselves in a short amount of time.

Point-of-Use: La-Man® takes a different approach to cleaning up contaminated compressed airlines. Our Extractor/Dryer provides the best service when it is located at the point-of-use in an application. This allows the air from the compressor to cool, thus condensing to liquid and enabling the Extractor/Dryer to do its job. The shortest distance from our filter to the point-of-use ensures cleaner air, therefore protecting valuable machinery and equipment.

Additional Features- Benefit• Models range from 15 SCFM thru 2,000 SCFM• Standard 5 micron ratings (lower micron rating available)• Removes 99.9% of the liquids entering the Extractor/Dryer• Easy to install and maintain without removal• Lightweight aluminum housing• Immediate cost savings from decreased downtime• Standard inlet and outlet NPT sizes• Improve equipment performance and product quality• Standard Differential Pressure Gauge for rust and dirt particles• Additional options available: float drain, regulator, lockout valve and electronic drain

Dry

ers

/A

fterC

oole

rs




62

LaMan Extractor/Dryer®EXTRACTOR DRYER SERVICE KITS Each Service Kit (SKA) Contains: (1) 1st Stage Element, (1) 2nd Stage Element, (4) Cap Gaskets, (1) Honeycomb

Base Core, and (1) Base Gasket Each Value Pack (VPA) Contains: (1) 1st Stage Element, (2) 2nd Stage Element, (4) Cap Gaskets, (1) Honeycomb

Base Core, and (1) Base Gasket Under normal use it is recommended to change the 1st Stage Element every 12 months and the 2nd Stage Ele-ment every 6 months. SCFM Model # Description15 SCFM 015SK 15 SCFM SERVICE KIT, STANDARD, (5 MICRON)

015VP 15 SCFM VALUE PACK, STANDARD, (5 MICRON) 459SK 15 SCFM SERVICE KIT, OILIMINATOR ADD ON, (5 MICRON)

50 SCFM 050SKA 50 SCFM SERIES SERVICE KIT, STANDARD, (5 MICRON)050VPA 50 SCFM SERIES VALUE PACK, STANDARD, (5 MICRON)409SK 50 SCFM SERVICE KIT, OILIMINATOR ADD ON, (5 MICRON)

80 SCFM 080SKA 80 SCFM SERIES SERVICE KIT, STANDARD, (5 MICRON)080VPA 80 SCFM SERIES SERVICE VALUE PACK, STANDARD, (5

MICRON)419SK 80 SCFM SERVICE KIT, OILIMINATOR ADD ON, (5 MICRON)

150 SCFM 150SKA 150 SCFM SERIES SERVICE KIT, STANDARD, (5 MICRON)150VPA 150 SCFM SERIES VALUE PACK, STANDARD, (5 MICRON)429SK 150 SCFM SERVICE KIT, OILIMINATOR, (5 MICRON)



ADD LETTER TO EXTRACTOR DRYER MODEL NUMBER TO ADD OPTIONS SCFM Model # DescriptionC 520CD CYCLE DRAIN (MODEL 520 ONLY) **F 500FD AUTOMATIC FLOAT DRAIN (Models 520 - 180)**E SED511-01 ELECTRONIC DRAIN - BRASS VALVE, 1/8” NPT**

OILIMINATOR ADD ON SCFM Model # Description15 SCFM 1383 1/4” NPT, SIDE PORT - No DP Gauge50 SCFM 1303 1/4” NPT, SIDE PORT - No DP Gauge

1313 3/8” NPT, SIDE PORT - No DP Gauge1323 1/2” NPT, SIDE PORT - No DP Gauge

80 SCFM 1333 1/2” NPT, SIDE PORT - No DP Gauge1343 3/4” NPT, SIDE PORT - No DP Gauge

150 SCFM 1353 1” NPT, SIDE PORT - No DP Gauge250 SCFM 1363 1 1/2” NPT, SIDE PORT - No DP Gauge500 SCFM 1373 2” NPT, SIDE PORT - No DP Gauge

Dry

ers

/A

fterC

oole

rs




63

Extractor/Dryer – How it Works

1. Compressed air containing tiny particles of dirt, dust, oil, rust and moisture,enters the first stage of the La-Man® Extractor/Dryer Filter.

2. A coalescing effect occurs as air passes through a cartridge mesh filter,which captures larger particles and causes moisture to form larger drop-lets.

3. Air velocity lessens as it enters the quiet zone, allowing particles to collectand moisture to condense on the honeycomb.

4. Particle-laden liquid flows along the bottom and out the drain.5. Air passes through the second stage wire supported fiber filter cartridge,

which captures remaining particles down to 5 microns (smaller micronsavailable).

6. Remaining moisture and contaminants are dried and filtered in the secondstage filter.

7. Exhaust air is clean and dry – no dirt, rust, oil, or moisture to disrupt airequipment operation.

**Standard Features include a Manual Weep Drain and Differential Pressure Gauge**

LaMan Extractor/Dryer®Extractor Dryer Models (Other micron sizes also available, contact Customer Service)

SCFM Model # Description15 SCFM 520A 1/4” NPT, TOP PORT - No DP Gauge (5 MICRON)

520B 1/4” NPT, SIDE PORT - No DP Gauge (5 MICRON)50 SCFM 105 1/4” NPT, SIDE PORT (5 MICRON)

106 3/8” NPT, SIDE PORT (5 MICRON)107 1/2” NPT, SIDE PORT (5 MICRON)

80 SCFM 110 1/2” NPT, SIDE PORT (5 MICRON)111 3/4” NPT, SIDE PORT (5 MICRON)

150 SCFM 120 1” NPT, SIDE PORT (5 MICRON)250 SCFM 140 1 1/2” NPT, SIDE PORT (5 MICRON)500 SCFM 180 2” NPT, SIDE PORT (5 MICRON)

Dry

ers

/A

fterC

oole

rs




64

High Volume Coalescent Filter / Moisture Separator

Moisture Separator 800 CFM, Portable 150 PSI (10.3 Bar), (1) 2" Inlet x (1) 2", (2) 1-1/2" Outlets W/O Fittings. (Includes 0-160 Pressure Gauge, Manual Drain, Wheels & Handle) Item # 1200-08002PB

Pirate Brand Moisture Separator

Clemco High-Volume Coalescent Filter

Needs at least 200 cfm of air flow at 50 psi to work effectively. Efficiency increases as air volume and pressure increase to a maximum of 800 cfm at 150 psi.

Item # 23108CL

Schmidt Moisture Separator

Moisture Separator 800 CFM, Portable (15”W x 26” L x 33”H), (1) 2" Inlet, (1) 2" Out-let W/O Fittings. Item # 1200-080-02

Other sizes (CFM capacity) and Stationary equipment are also available, contact Customer Service for additional information.

Dry

ers

/A

fterC

oole

rs




65

Air Dryers and Aftercoolers

Desiccant Air Dryers

Available from 250cfm to 2,500 cfm capacities

DRY-O-LITE DESICCANT (50 LB BAGS) item # FD2-100

AftercoolersAvailable from 250cfm to 2,500 cfm capacities

Contact Customer Service for additional information.

Item No DescriptionACSE0250-12V-4P ACS 250cfm 12V AftercoolerACSE0375-12V-4P ACS 375cfm 12V Aftercooler

Dus

t Col

lect

ors

/Fi

lters




66

Dust Collectors

Offering Dust Collectors from manufacturers you know like:

ACT ClemcoEmpire

FarrTorit

Trinco

Dust Collector Filter Cartridges and Filter Bags

New or used

To obtain a quote, get delivery information or place an order for OEM or

after-market dust collector filter cartridges or filter bags contact

Customer Service.

Needed Information:• Manufacturer of the Dust Collector and Model• Size• Description of filter and material

(i.e. open, closed, flanged)• Number needed

We also offer filter cartridge cleaning service.

Hos

e




67

Cover: Red EPDM synthetic rubber Class C (Limited Oil)Reinforcement: Sprial Synthetic yarn, 2” is braidedTube: EPDM synthetic rubber, RMA Class C (Limited Oil Resistance)Temperature Range: -40ºF (-40ºC) to 190ºF (88ºC)Branding: Continental ContiTech 200psi WP

Air Hose

Air Hose

Couplers Clamp

Compressor HosePusher

Line Air Hose

Use with Hose End Coupler

Use with Hose End or

Long Shank Coupler

Part # ID (in.)

OD (in.)

WT LB/FT

Hose End

Coupler

Hose End Coupler

Long Shank Swivel Coupler

Bolt Clamp Double Bolt Clamp

AH075 3/4" 1.14" 0.34 GJ075 DPHE075 2 Lug n/a BC-050B

1.0625" to 1.188" (1-1/16" - 1-3/16")

2 Bolt N/A

AH100 1” 1.38” 0.54 GJ100 DPHE100 2 Lug DPLF-100 BC-075B

1.313” to 1.50”(1-5/16 - 1-1/2”)

2 BoltDB-40

1.313” to 1.594”

(1-5/16 to 1-19/32)

AH125 1-1/4" 1.73" 0.75 GJ125 DPHE125 4 Lug DPLF-125 BC-100

1.625" to 1.844" (1-17/32" to 1-23/32")

4 BoltsDB-49

1.625" to 1.9375"

(1-5/8" to 1-15/16")

AH150 1-1/2" 1.97" 0.86 GJ150 DPHE150 4 Lug DPLF-150 BC-150A

1.875" to 2.063" (2-3/32" to 2-9/32")

4 BoltsDB-60

1.875" to 2.375"

(1-7/8" to 2-3/8")

AH200 2" 2.56" 1.16 GJ200 DPHE200 4 Lug DPLF-200 BC-150C

2.468" to 2.719" (2-15/32" to 2-23/32")

4 BoltsDB-76

2.375" to 3.0625"

(2-3/8" to 3-1/16")

Air Hose AssembliesItem # Description

AH075/50-C Air Hose, 3/4” x 50 ft Red , with aluminum 2 lug fittingsAH100/50-C Air Hose, 1” x 50 ft Red , with aluminum 2 lug fittingsAH125/50-C Air Hose, 1-1/4” x 50 ft Red , with aluminum 4 lug fittingsAH150/50-C Air Hose, 1-1/2” x 50 ft Red , with aluminum 4 lug fittings

Item # Description035-0322-0102 Punch-lok Clamp, P-8, 2” Clamp ID, 5/8” Band width

035-0401-0104 Punch-lok Clamp, P-10, 2-1/2” Clamp ID, 5/8” Band width

Hos

e




68

Blast Hose x is the material (AL, BR, PL or S)

ID(in.) OD (in.) Supplier Wall Ply Wt

lb/ft Item # Ft/Roll

Coupling Size

Nozzle Holder/ Thread Size

3/4 NPS 1-1/4”Thrds 50MM

1/2 1-1/16(1.06)

EMP 4 0.5 520792sold per foot BCS001-

x & DPME-100

BCS001-x N/A N/A

TBL 2 0.36BH2050/25 25BH2050/50 50BH2050/100 100

1/2 1-3/16(1.1875)

ABI Light 2 .56BH050/L/25 25

Q05x or 00599CL

HE05x or 00577CL N/A N/A

BH050/L/50 50

CLE Med 2 .4823750CL 2523751CL 50

TBL 4 .38BH4050/25 25BH4050/50 50

3/4 1-5/16(1.312) CLE Supa 0.52

23101CL 2511395CL N/A 99173CL 11398CL

23102CL 50

3/4 1-1/2(1.50)

ABI Heavy 2 0.81BH075/H/25 25

Q1x or 00598CL* (*gasket tapered)

N/A HE1x MHE1x BH075/H/50 50

TBL 4 .69BH4075/25 25BH4075/50 50BH4075/100 100

1 1-1/2(1.50)

ABI Light 4 .55BH100/L/25 25

Q1x or 08412CL* (*gasket tapered)

N/A HE1x MHE1x BH100/L/50 50BH100/L/100 100

CLE Supa .5423103CL 2523104CL 50

1 1-7/8(1.88)

ABI Heavy 4 1.1BH100/H/25 25

Q2x or Q2Xx N/A HE2x MHE2x

BH100/H/50 50

TBL 4 1.03BH4100/25 25BH4100/50 50BH4100/100 100

x is the material (AL, BR, PL or S)

Abrasive Inc

Clemco

Thunderblast

Hos

e




69

ID (in.)

OD (in.) Supplier Wall Ply Wt

lb/ft Item # Ft/Roll

Coupling Size Thread Size

Nozzle Holder/1-1/4”Thrds 50MM

1-1/4 1-7/8(1.88)

ABI Light 4 0.93BH125/L/25 25

Q2x Q2Xx HE2x MHE2x

BH125/L/50 50BH125/L/100 100

CLE Supa 0.8123105CL 2523106CL 5023643CL 100

TBL 2 0.83BH2125/25 25BH2125/50 50BH2125/100 100

1-1/4 2-5/32(2.17)

ABI Heavy 4 1.27BH125/H/25 25

Q3x Q3Xx HE3x MHE3x

BH125/H/50 50BH125/100 100

TBL 4 1.23BH4125/25 25BH4125/50 50BH4125/100 100

1-1/2 2-3/8(2.36)

ABI Heavy 4 1.49BH150/H/25 25

Q4x Q4Xx HE4x MHE4x

BH150/H/50 50BH150/H/100 100

TBL 4 1.33BH4150/25 25BH4150/50 50BH4150/100 100

Blast Hose

Key DescriptionABI Abrasives Inc labeled, Premium 2 & 4 ply, abrasive resistant natural rubber liner, braided high

tensile texible cord reinforcing. Heavy wall offers longer life. Light wall more flexible and lighter in weight.

CLE Clemco Med is 2 braid medium wall greenCLE Clemco Supa™ Light weight super flexible, brownEMP Empire premium blast hose, 4 ply, static dissipating, nylon wrapped construction TBL Thunderblast, Premium 2 & 4 ply, static conductive natural tube, high tensile textile plies.

4 Ply Hose 2 Ply Hose

Hos

e




70

Reclaim Hose - Heavy Duty

Dust Hose

UBK™ Series Heavy Duty Polyurethane Lined Material Handling Hose

Construction PVC cover with polyurethane liner and rigid PVC helix.

Service Temperature -40 to 150 ºF

Neo-Duct® HTNP2 Series - Neprene Coated, Two-Ply Polyester Ducting Hose with steel wire helix.

Temperature Range: From -65°F (-54°) to 250°F (127°C) Sold in 25 ft lengths

Clamp Item # Description

520-512 For 2” ID520-531 For 4” ID11577CL For 4” ID11578CL For 5” ID520-551 For 6” ID520-561 For 8” ID522-314 For 10” ID

Dust Hose Item # I.D. Min. Bend Radius

Max. Working Pressure

Wt lb/ft

HTNP2-300X25 3 in 5.0 in (127.0 mm) 25 PSI .33HTNP2-400X25 4 in 6.50 in (165.1 mm) 23 PSI .48HTNP2-500X25 5 in 7.5 in (190.5 mm) 22 PSI .61HTNP2-600X25 6 in 9.0 in (228.6 mm) 21 PSI .70HTNP2-700X25 7 in 9.50 in (241.3 mm) 20 PSI .92HTNP2-800X25 8 in 10.0 in (254.0 mm) 19 PSI 1.04HTNP2-1000X25 10 in 11.0 in (279.4 mm) 18 PSI 1.36HTNP2-1200X25 12 in 13.50 in (342.9 mm) 17 PSI 1.85

Nominal Specifications

SeriesVacuum

Working Rating Min. Bending StandardID ID OD OD Pressure (psi) (in. Hg) Radius Length Weight

(in.) (mm) (in.) (mm) 68°F 104°F 68°F 104°F (in. @ 68°F) (ft.) (lbs/ft.)UBK200 2 50.8 2.40 61.0 40 15 Full 28 2 100/50 0.59UBK250 21/2 63.5 3.07 78.0 40 15 Full 28 4 100/50 0.79UBK300 3 76.2 3.64 92.5 40 15 Full 28 4 100/50 0.83UBK400 4 101.6 4.76 120.9 35 13 Full 28 6 100/50 1.37UBK500 5 127.0 5.69 144.5 30 10 28 15 10 100/50/20 2.28UBK600 6 152.4 6.81 173.0 30 10 28 15 12 100/50/20 3.10UBK800 8 203.2 9.02 229.0 30 10 28 15 15 50/20 4.51

Spiral Clamps / Counter-Clockwise

Item # Fits Hose I.D. SCC-200 2 inSCC-250 2 1/2 in SCC-300 3 inSCC-400 4 in

Item # Fits Hose I.D.SCC-500 5 inSCC-600 6 inSCC-800 8 in

Hos

e




71

Fittings for: For Pirate Brand and Schmidt style twinline.

Twinline HoseCL01951 Twinline Hose, 3/16” ID x 50’ with

1/8” fittings.CL01952 Twinline Hose, 3/16”ID x 5’ with

1/8” fittings.

Works with Clemco and Clemco style Blast Pots and Valves.

Other lenghts with fittings are available.

200-055 Twinline Hose, 3/16” ID x 55’ with1/4” and 1/8” fittings.

200-110 Twinline Hose, 3/16”ID x 110’ with1/4” and 1/8” fittings.

Works with: • Pirate Brand Blast Pots and Valves.• Schmidt Blast Pots /Valves

(item # 4100-501 and 4100-701)

200-055E Twinline Hose for Empire Blast Pots / Valves(item # 521862, 521882, 521892)

TWBKYG-FT Bulk Twinline Hose, 3/16” ID sold by the foot without fittings

01943CL Hose End, 3/16” Reusable

01944CL Union, Twinline Hose (Used to connect twinline)

For Clemco style twinline.

For Empire style twinline

4205-301-00PB Hose Insert, Swivel 3/16” x 1/8”


HF7323 Ferrule (Same as 7035-301)

HF7323 Ferrule (Same as 7035-301)

4204-301-02PB Hose Insert, Rigid, 3/16” x 1/4”

4204-301-00PB Hose Insert, Rigid, 3/16” x 1/8”



1/4” Hose Insert, Rigid

1/8” Hose Insert, Swivel

1/8” Swivel Insert

1/4” Swivel

1/8” Swivel Insert

NOTE: On each tube of the twinline be sure to use the same size fitting. (1/8” or 1/4”)

Ligh

ts




72

Plugs and Connectors Cord / CableItem # Description Item # Description7109-200 Connector, Female, Twist Lock, 2 Prong 7106-162 Electric Cord, 16-27109-201 Connector, Male, Twist Lock, 2 Prong 7106-163 Electric Cord, 16-37109-300 Connector, Female, Twist Lock, 3 Prong WT16.2 EC.Red Cable, Extreme, 16.27109-301 Connector, Male, Twist Lock, 3 Prong WR16.3 EC-Red Cable, Extreme, 16.3

Western Technology Brick Kick-It Tough Explosion Proof Area LightItem # Description

9610D

Non-explosion proof LED Lighthead, 100ft cable, non-explosion proof Power Connection Box and Plug (NON-EXPLOSION Proof)

9610ANTI-GLARE SHIELD Anti-glare shield for Brick (flat shield)

9610BLASTSHIELD Blast Shield for Brick LED (flat shield)

9610 A-FRAME

A-Frame (Mount only,light not included

6300CAPOverspray Lens Cover for 6300/9610 (light not included)

9610PUCK Double Magnet Handle

Item # Description

4100LED Three Directional Wide Area Light with Magnetic Mount and 25 ft wire and LED Bulbs

4100LED-50 With 50 ft wire 4100LED-100 With 100 ft wire

4210LED Single Lamp Area Light with Magnetic Swivel Mount, 25 ft wire and LED Bulb

4210LED-50 With 50 ft wire

4210LED-100 With 100 ft wire

8245LED50 LED Wide Area Light - 50 ft wire, magnet and Plug

Western Technology Wide Area LED Light

Item # Description

9610KNUCKLE Magnetic Knuckle for Brick

9610TRIPOD

Sturdy Stand and 20” Riser (requires a knuckle to connect to light)

9610QUADPOD

Quad-Pod - No Mounting Bracket (requires a knuckle and 9610ADAPTER to connect to light)

9610ADAPTERQuad-Pod Topper Adapter For Brick LED

Ligh

ts




73

Clemco Beacon LED Blast Light

Lens Housing, 27749

Ligh

ts




74

# Item # Description

290285 12v Blast Light Assembly, 20 Watt

290283 12v Blast Light Assembly, 35 Watt

1 290288 Retaining Ring / Outer

2 290287 Replacement Lens Kit

3290286 20 Watt Halogen Bulb

290284 35 Watt Halogen Bulb

4 290282 Lamp Socket Only

5 290280 Blast Light Body only C/W Bracket

6 290281 Strain Relief Fitting

7 Power Cord

290299 Retaining Ring Install Tool

290555 Alligator Clips / Pair

12v Abrasive Blast Light

RPB LED Light for NOVA 3 Blast Helmet

# Item # DescriptionNV09-501-4 L4 Blast Light Complete, (4 hr battery)NV09-501-8 L4 Blast Light Complete, (8 hr battery)

1 NV09-510 Light Assembly2 NV09-524 Light Cable

3NV09-530-4 Battery Pack & Belt - 4 hrNV09-530-8 Battery Pack & Belt - 8 hr

4 NV07-122 Cable / Hose Clips5 NV09-520 Top and Bottom Mounting Clips6 NV09-522 Outer Lens7 NV09-526 12vDC Power Supply and Power Cable (US)8 NV09-021 Power Cable US9 NV09-525 12vDC Power Supply

Ligh

ts




75

Item # Description WT3460LED Gen2 3400LEDS complete no air blast light system with 100 ft. EC cable WT3609B Pyrex lenses box of 12 WT3112HC-LED Low profile stanchion mount 3460LED WT3402 LED-2 GEN2 3460 LED Halo

Western Technology Blast Lights

Item # DescriptionWT3475LED10 6 LED Blast Light, 10’ 16.2 Green EC Cable w/ (2) flat connectorsWT3475LEDS50 6 LED Blast Light, 50’ EC Cable, Power Box & Cord PlugWT3475LEDS 6 LED Blast Light, 100’ EC Cable, Power Box & Cord PlugWT3402 LED-3 Replacement HaloWT3600B Pyrex Lens (box of 12)WT3475 CR Lens PK Polycarbonate Lens (12 pk with screws)WT3112HC-LED Light Stanchion & Hose Clamp

WT3500LED10 3500 Field Repairable LED Light AssyWT3500LED10P 3500 Field Repairable LED Light Assy, wit connectorWT3500LEDS100 3500 Field Repairable LED Light Assy, with Power Pack & 100’ CableWT3500LEDBAT100 3500 Field Repairable LED Light Assy, with 100’ Cable & Battery Clamps

# Item # Description1 3500-63053071 Front Bumper3 3500 Lens Pk Lens, Heat Treated, Pack of 6

2, 4, 5

3500 LED Kit Kit, LED Module (#5) LED Engine Module, (#4) Primary Gasket, (#2) w/ Snap Ring

5 3500 LED Module

LED Engine Module

6 N/A Housing7 N/A Mounting Screws

8, 9, 10

3500 Power Kit Power Kit, Power Cord Seal (#8), Strain Relief Connector (#9), 10’ Power Cord (#10)

10 3500-41541002 Cord Only13 3500 Mount Kit Hose Mount

Met

erin

g Va

lves




76

Pressure Hold Metering Valves

Pirate Brand

Automatic Plunger Valve (APV)

2149-006PB (TC) 1”

Automatic Plunger Valve II (APVII)

2148-006PB 1”2149-007PB (TC) 1-1/4” 2148-007PB 1-1/4”2149-008PB (TC) 1-1/2” 2148-008PB 1-1/2”2149-106PB (Ureth) 1” only available

with TCSleeve

2149-107PB (Ureth) 1-1/4”2149-108PB (Ureth) 1-1/2”

Marco Maxum

1014200 (TC) 1”

Maxum III

1014201 (Ureth)1”1014202 (TC) 1-1/4” 10101949 (TC) 1-1/4”1014203 (Ureth) 1-1/4” 10101945 (Ureth) 1-1/4”1014204 (TC) 1-1/2” 10101950 (TC) 1-1/2”1014205 (Ureth) 1-1/2” 10101946 Ureth) 1-1/2”

Schmidt Thompson Valve

2149-006 (TC) 1”

Thompson II

2152-006 (TC) 1”2149-007 (TC) 1-1/4” 2152-007 (TC) 1-1/4”2149-008 (TC) 1-1/2” 2152-008 (TC) 1-1/2”2149-106 (Ureth) 1” 2152-106 (Ureth) 1”2149-107 (Ureth) 1-1/4” 2152-107 (Ureth) 1-1/4”2149-108 (Ureth) 1-1/2” 2152-108 (Ureth) 1-1/2”

(Some parts are interchangable) (Parts are NOT interchangable)

Empire Automatic Sure-Flo 290215

Pirate Brand Automatic Pinch Valve 290-215

(Some parts are interchangable)

ClemcoAutomatic Quantum

Valve (AQV)24447

(TC): With Tungsten carbide sleeve(Ureth): With Urethane sleeve

For breakdown of Clemco, Empire, Pirate Brand and Schmidt valves go to the manufacturer’s section of the guide.

Met

erin

g Va

lves




77

Pressure Release Metering Valves

Pirate Brand

Manual Plunger Valve

(MPV)

2125-106PB (1”)

MPV II

2126-106PB (1”)

2125-107PB (1-1/4”) 2126-107PB (1-1/4”)

2125-108PB (1-1/2”) 2126-108PB (1-1/2”)

Marco Bantam

1014100 (1”)

1014101 (1-1/4”)

1014102 (1-1/2”)

Schmidt

Micro Valve

2125-106 (1”)

MV22125-107 (1-1/4”) 2127-107 (1-1/4”)

2125-108 (1-1/2”) 2127-108 (1-1/2”)

MV3

2128-107 (1-1/4”)

2128-108 1-1/2”)

(Most parts are interchangable) (Parts are NOT interchangable)

Clemco Flat Sand Valve (FSV) 02427

Pirate Brand

AMV II Extreme Duty 102-4350

Marco Regulator 1014000

Clemco

Manual Quantum

Valve (MQV)

22845

Empire Sure-flo 290383

Pirate Brand Pinch Valve 290-383

Pirate Brand#100

Metering Valve

1MV-C10

Marco MV100 10104965

For breakdown of Clemco, Empire, Pirate Brand and Schmidt valves go to the manufacturer’s section of

the guide.

Met

erin

g Va

lves




78

Mini / Jr Metering Valves

Ball Valve

Pirate Brand

Abrasive Metering Valve Jr.

101-2470

Clemco MSV 01247

Marco Regulator Jr. 10100684

Pinch ValveItem # 1PV-C10 Pinch Valve

Item # PV2AI Pinch Valve - Safe-TNormally closed

Item # VBBR025 VBBR038 VBBR050 VBBR075 VBBR100 VBBR125 VBBR150 VBBR200Size 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2”

Item # Description

A7030601 Union End Ball Valve, 1-1/4”, Lever Handle

A7030607 Union End Ball Valve, 1-1/4”, “T” Handle

Muf

flers

/B

low

dow

n A

ssy




79

Clemco Exhaust Muffler

Marco Exhaust Muffler

1012151 1011103 1011101

1011102 1011104

Empire Exhaust ValveItem # Description

290181 MG72 Exhaust Valve for pots with SuperBlast 680 System

290582 MG78 Exhaust Valve for Blast Room pots with 680 Remote Controls

518492 Ball Valve, 1” NPTfor pots with 780 Remote Controls

763322 Silencer, 1” NPT

Muf

flers

/B

low

dow

n A

ssy




80

Pirate Brand Muffler

Item # Description

2011-006PB Muffler, Blowdown, 1” MNPT

2011-007PB Muffler, Blowdown, 1-1/4” MNPT

VBBR100 Ball Valve, 1”

VBBR125 Ball Valve, 1-1/4”

Schmidt Mufflers

Item # Description2011-006 Muffler, 1” MNPT

2011-007 Muffler, 1-1/4” MNPT

2011-501-90 Volumetric Blowdown Suppression II (VBSII) System Conversion Kit, with VBSII silencer, mounting bracket and misc. fittings

2011-501-91 Volumetric Blowdown Suppression II (VBSII) System Conversion Kit, with VBSII silencer, mounting bracket, blowdown hose assy, ball valve and misc. fittings

Blowdown Assy.Mfg Item # Description

Non-OEMBH4075-FT 3/4” ID x 1-1/2” OD 4 ply Blast HoseHE1AL Nozzle Holder, HE1 Aluminum

Pirate Brand 4115-005PB For 1-6 bag pots, 18” LongSchmidt 4115-005 For 1-6 bag pots, 18” Long

Noz

zles




81

Nozzles - Long Venturi Style - Standard Entry

Tungsten Carbide “Bruiser” Tungsten Carbide, all brass outer body with polyurethane inner cushion and 1-1/4” threads.

Greatest Resistance Against BreakageName Bore Diameter Model # Item #

# 3 3/16” TLVE-3 1915630# 4 1/4” TLVE-4 1915640# 5 5/16” TLVE-5 1915650# 6 3/8” TLVE-6 1915660# 7 7/16” TLVE-7 1915670# 8 1/2” TLVE-8 1915680

Tungsten Carbide, polyurethane outer jacket and brass 1-1/4” threads

Can Handle Physically Demanding Operations. Name Bore Diameter Model # Item #

# 3 3/16” TLVE-3P 2015630# 4 1/4” TLVE-4P 2015640# 5 5/16” TLVE-5P 2015650# 6 3/8” TLVE-6P 2015660# 7 7/16” TLVE-7P 2015670# 8 1/2” TLVE-8P 2015680

Tungsten Carbide, polyurethane outer jacket and 1-1/4” threads.

Competitive in price with economy nozzles without sacrificing the quality of a tungsten carbide liner.

Name Bore Diameter Model # Item ## 3 3/16” TLVE-3AP 2015633# 4 1/4” TLVE-4AP 2015643# 5 5/16” TLVE-5AP 2015653# 6 3/8” TLVE-6AP 2015663# 7 7/16” TLVE-7AP 2015673# 8 1/2” TLVE-8AP 2015683

Tungsten Carbide, polyurethane outer jacket and 50mm threads.Competitive in price with economy nozzles without sacrificing the quality of a tungsten carbide liner.

Name Bore Diameter Model # Item ##3 3/16” TLVE-350AP 2015634#4 1/4” TLVE-450AP 2015644#5 5/16” TLVE-550AP 2015654#6 3/8” TLVE-650AP 2015664#7 7/16” TLVE-750AP 2015674#8 1/2” TLVE-850AP 2015684

Long venturi style nozzles yield about a 40% greater production rate than straight bore nozzles. The internally tapered design of the venturi nozzle accelerates and evenly distributes the abrasive over the entire blast pattern. These nozzles are designed for use with a 1” ID blast hose for maximum cutting action on hard to clean surfaces.

Noz

zles




82

Nozzles - Long Venturi Style - Standard EntryTungsten Carbide

Tungsten Carbide, polyurethane jacket, aluminum 50mm threads, with a reinforced polyurethane upper body.

NameBore

Diameter Model # Item #

# 3 3/16” TLVE-350P 2015632

# 4 1/4” TLVE-450P 2015642

# 5 5/16” TLVE-550P 2015652# 6 3/8” TLVE-650P 2015662# 7 7/16” TLVE-750P 2015672# 8 1/2” TLVE-850P 2015682

SiAlON

NameBore

Diameter

Lightweight BP200 SiAlON liner with polyurethane jacket and 1-1/4” brass threads.

Model # Item ## 3 3/16” SN156-3P 2615630# 4 1/4” SN156-4P 2615640# 5 5/16” SN156-5P 2615650# 6 3/8” SN156-6P 2615660# 7 7/16” SN156-7P 2615670# 8 1/2” SN156-8P 2615680

NameBore

Diameter

Lightweight BP200 SiAlON liner with all polyurethane jacket and 1-1/4” threads

Model # Item ## 3 3/16” SN156-3AP 2615633# 4 1/4” SN156-4AP 2615643# 5 5/16” SN156-5AP 2615653# 6 3/8” SN156-6AP 2615663# 7 7/16” SN156-7AP 2615673# 8 1/2” SN156-8AP 2615683

NameBore

Diameter

Lightweight BP200 SiAlON liner polyurethane jacket and 50mm aluminum threads

Model # Item ## 3 3/16” SN156-350P 2615632# 4 1/4” SN156-450P 2615642# 5 5/16” SN156-550P 2615652# 6 3/8” SN156-650P 2615662# 7 7/16” SN156-750P 2615672# 8 1/2” SN156-850P 2615682

SiAlon nozzles offer service life and durability similar to tungsten carbide, but are about half the weight.

Noz

zles




83

SiAlon

NameBore

Diameter

Lightweight BP200 SiAlON liner with all polyurethane jacket and 50mm threads

Model # Item ## 3 3/16” SN156-350AP 2615634

# 4 1/4” SN156-450AP 2615644# 5 5/16” SN156-550AP 2615654# 6 3/8” SN156-650AP 2615664# 7 7/16” SN156-750AP 2615674# 8 1/2” SN156-850AP 2615684

Nozzles - Long Venturi Style - Standard Entry

Nozzles - Long Venturi Style - Wide EntryThe wide entry throat opening in the Long Venturi nozzle offers a 15% increase in production over a standard venturi by eliminating restriction and turbulence upstream of the venturi section of the nozzle. Offered in a 1-1/4”, flanged or 50mm threads. All are designed to be used with 1-1/4” ID blast hose.

Tungsten

NameBore

Diameter

Tungsten carbide liner with polyurethane jacket and 1-1/4” brass threads.

Model # Item ## 5 5/16” T159-5P 2015950# 6 3/8” T159-6P 2015960# 7 7/16” T159-7P 2015970# 8 1/2” T159-8P 2015980#10 5/8” T159-10P 2015910#12 3/4 “ T159-12P 2015912

NameBore

Diameter

Tungsten carbide liner with all polyurethane jacket and 50mm threads.

Model # Item ## 5 5/16” T159-550AP 2015954# 6 3/8” T159-650AP 2015964# 7 7/16” T159-750AP 2015974# 8 1/2” T159-850AP 2015984#10 5/8” T159-1050AP 20159104#12 3/4 “ T159-1250AP 20159124

NameBore

Diameter

Tungsten carbide liner with polyurethane jacket and 50mm aluminum threads.

Model # Item ## 5 5/16” T159-550P 2085952# 6 3/8” T159-650P 2085962# 7 7/16” T159-750P 2085972# 8 1/2” T159-850P 2085982#10 5/8” T159-1050P 20159105#12 3/4 “ T159-1250P 20159125

Noz

zles




84

Nozzles - Long Venturi Style - Wide Entry

Tungsten

NameBore

Diameter

Tungsten carbide liner with flanged aluminum jacket. (Also available with a polyurethane jacket.)Model # Item #

# 6 3/8” T159-6F 1915961# 7 7/16” T159-7F 1915971# 8 1/2” T159-8F 1915981#10 5/8” T159-10F 1915910#12 3/4 “ T159-12F 1915912

SiAlON

NameBore

Diameter

Lightweight BP200 SiAlON liner with polyurethanejacket and 1-1/4” brass threads

Model # Item ## 5 5/16” SN159-5P 2615950# 6 3/8” SN159-6P 2615960# 7 7/16” SN159-7P 2615970# 8 1/2” SN159-8P 2615980#10 5/8” SN159-10P 2615910#12 3/4 “ SN159-12P 2615912

NameBore

Diameter

Lightweight BP200 SiAlON liner with all polyurethane jacket and 1-1/4” threads

Model # Item ## 5 5/16” SN159-5AP 2615953# 6 3/8” SN159-6AP 2615963# 7 7/16” SN159-7AP 2615973# 8 1/2” SN159-8AP 2615983

NameBore

Diameter

Lightweight BP200 SiAlON liner with polyurethane jacket and 50mm aluminum threads.

Model # Item ## 5 5/16” SN159-550P 2615952# 6 3/8” SN159-650P 2615962# 7 7/16” SN159-750P 2615972# 8 1/2” SN159-850P 2615982#10 5/8” SN159-1050P 26159102#12 3/4 “ SN159-1250P 26159122

NameBore

Diameter

Lightweight BP200 SiAlON liner with all polyurethane jacket and 50mm threads.

Model # Item ## 5 5/16” SN159-550AP 2615954# 6 3/8” SN159-650AP 2615964# 7 7/16” SN159-750AP 2615974# 8 1/2” SN159-850AP 2615984#10 5/8” SN159-1050AP 26159104#12 3/4 “ SN159-1250AP 26159124

Noz

zles




85

Nozzle Washers

Nozzle Washer/Gasket

For ½” ID Entry Nozzle 3/4" Threads 130110

50mm Thread Adapter

130784

Changes 50mm

holder to accept

1-1/4” threadnozzle,2-4-1/2”

UNC Thread

For 1” Entry Nozzle, 1-1/4" Threads 130112

For Wide Entry Nozzle, 50mm Threads 130102

For Wide Entry Nozzle, 1-1/4” Threads 130103

Special Venturi Nozzles

The double venturi offers a 35% larger blast pattern than a standard long venturi with only a very slight loss in abrasive velocity. Designed to be used on jobs where medium cutting

action is required with a more even dispersion of abrasive throughout the larger blast pattern. Excellent for plastic or

agricultural abrasives.

Double Venturi Nozzles

TungstenMetal Jacket and

Aluminum 1-1/4” ThreadsMetal Jacket and

Aluminum 50mm Threads

Name Bore Dia. Model # Item # Model # Item #

#3 3/16” T125-3 1912530 n/a n/a

# 4 1/4” T125-4 1912540 T125-450 1912543

# 5 5/16” T125-5 1912550 T125-550 1912553

# 6 3/8” T125-6 1912560 T125-650 1912563

# 7 7/16” T125-7 1912570 T125-750 1912573

# 8 1/2” T125-8 1912580 T125-850 1912583

BP200 SiAlON Aluminum Jacket and 1-1/4” Threads Aluminum Jacket and 50mm Threads

Name Bore Dia Model # Item # Model # Item #

# 4 1/4” SN125-4 2612540 SN125-450 2612543

# 5 5/16” SN125-5 2612550 SN125-550 2612553

# 6 3/8” SN125-6 2612560 SN125-650 2612563

# 7 7/16” SN125-7 2612570 SN125-750 2612573

# 8 1/2” SN125-8 2612580 SN125-850 2612583

# 12 3/4” SN125-12 2612512 SN125-1250 2612513

Noz

zles




86

• BP200SiAlONliner• Increasedabrasivevelocity• Increasedproduction• Reducedlabor• Lightweight/minimizefatigue• Standardairrequirements• Lower compressor fuel costs

Special Venturi Nozzles

“Super Stick” Nozzles

Name Bore Diameter

Aluminum Jacket, 1-1/4” Entry - 1-1/4” Threads

12” Length

Aluminum Jacket,1-1/4” Entry - 50mm Threads

12” LengthModel # Item # Model # Item #

#4 1/4” SN159-4XL 2615940XL12 SN159-450XL 2615942XL12#5 5/16” SN159-5XL 2615950XL12 SN159-550XL 2615952XL12# 6 3/8” SN159-6XL 2615960XL12 SN159-650XL 2615962XL12# 7 7/16” SN159-7XL 2615970XL12 SN159-750XL 2615972XL12# 8 1/2” SN159-8XL 2615980XL12 SN159-850XL 2615982XL12#10 5/8” n/a n/a SN159-1050XL 26159102XL12

SN159-6XL vs. TLVE-6P

Fan NozzlesThe new fan blast nozzle is designed for even distribution of abrasive over the entire rectangular

blast pattern which eliminates hot spots and reduces abrasive consumption.

Name Bore Diameter Liner

Polyurethane Jacket1-1/4” threads

Polyurethane Jacket50mm threads

Model # Item # Model # Item #

#6 3/8” Tungsten FAN-6AP 2016063 FAN-650AP 2016064

#6 3/8” SiAlON SN FAN-6AP 2616063 FAN-650AP 2616064

“Square Shooter” NozzlesThe Square Shooter blast nozzle production rate is faster than the conventional long venturi high production

nozzles. The square Shooter nozzle requires only a 10% to 20% overlap as compared to a long venturi nozzlewhich requires a 50% overlap. This increase results in abrasive savings due to less abrasive consumption

as well as productivity savings.

NameBore

Diameter

Tungsten carbide square long venturi liner with polyurethane jacket and 1-1/4” brass threads.

Tungsten carbide square long venturi liner with polyurethane

jacket and 50mm aluminum threads.Model # Item # Model # Item #

#4 1/4” SS-4 2020040 SS-450 2020042# 5 5/16” SS-5 2020050 SS-550 2020052# 6 3/8” SS-6 2020060 SS-650 2020062

Noz

zles




87

Special Venturi NozzlesBoron Carbide Short Venturi Nozzles

NameBore

Diameter

Steel Jacket and Threads 3/4-14

Model # Item # Use with the following nozzle holders & hose BCS001-S: ¾” NPS – Steel

# 3 3/16” B3S2-GV 1505532 BCS001-AL: ¾” NPS - Aluminum# 4 1/4” B4S2-GV 1505542# 5 5/16” B5S2-GV 1505552 1/2” x 1-1/16” 2 ply Blast Hose

# 6 3/8” BSS2-GV 1505562

Other NozzlesAngle Nozzles

These nozzles are excellent for getting inside tight places like bridge lattice, behind flanges or inside pipe. These nozzles are available in tungsten carbide, boron carbide, and ROCTEC®

featuring long life blast outputs between 0° and 125° relative to the input opening. Available in: single, double, triple or quadruple outlets.

Bore Diameter

40 degree - Boron Carbide Nozzle with steel jacket and threads - 3/4-14 NPSM

Model # Item #.236” 6mm 1502510.315” 8mm 1502515.374” 10mm 1502520

“Banana” Nozzles

Item # 1502500

Adapter: 50mm to 3/4” NPSM (boron carbide lined)

“Banana” Nozzles

Item # Model # Bore Diameter

1213010 C1-1 3/32” (2.4mm)

1213020 C1-2 1/8” (3.2mm)1213025 C1-2-1/2 5/32” (4mm)1213030 C1-3 3/16” (4.8mm)1213040 C1-4 1/4” (6.4mm)1213050 C1-5 5/16” (7.9mm)1213060 C1-6 3/8” (9.5mm)

C1 Series aluminum oxide cermic straight bore inserts.

1-1/8”OD,TAPEREDTO5/8”OD

Overall length 3-3/4” (95.3mm)

Also available in tungsten carbide

For information on other available nozzles and configurations contact Customer Service.

Pipe

Bla

stin

g




88

Pipe Blasting Tools

Spot

Cle

anin

g




89

Dynabrade DynaZip - Spot Cleaning ToolDynabrade Red DynaZip Versatility Kit .4 hp, Right Angle, 3,200 RPM, Planetary-Geared, Rear Exhaust• 18255 DynaZip Tool• 92244 Coarse Wire Wheel (1/2" wire bristle width x 3/4" wide band)• 92245 Coarse Wire Wheel (3/4" wire bristle width x 3/4" wide band)• 92255 Eraser Wheel• 92284 Wheel Hub Assembly

• Excellent power for effectively removing seam sealer and paint.• DynaZip tool outperforms conventional spiral-wound wheels without clogging.• Tool duplicates sand-blasting effect without surface fatigue.• DynaZip is effective for material removal on painted surfaces, with no

damage to base paint.

Clemco Power Gun - Spot Cleaning Tool

Air ConsumptionPressure (psi) 40 50 60 75 90 100 120 140

Volume (cfm) 40 50 60 70 80 90 105 120

Fixed orifice: Air jet 1/4”; nozzle 1/2”

Documents

ABRASIVES INC/BCS INDUSTRIAL BUYERS GUIDE … · 1-1/4 NPS 1-1/4: SB1SAL SB1SBR : ... *Modified NPT threads allow coupling to screw further onto pipe. ... (Compatible with Schmidt