Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
PRIMERGY RX100 S2 Configuration Sheets
About this manual
� Abbreviations
The following expressions and abbreviations are used to describe the product names used in this manual.
Microsoft, Windows, Windows Server are registered trademarks of the Microsoft Corporation in the USA and other countries. Intel, Pentium, and Celeron of registered trademarks of the Intel Corporation and affiliated companies in the United States and/or other countries.Other product names used are trademarks or registered trademarks of their respective manufacturers. Other products are copyrights of their respective manufacturers.
All Rights Reserved, Copyright© FUJITSU LIMITED 2005
A Configuration Sheet
Use this form to record the hardware configuration and various settings of your server.
B Design Sheet
Use this form to record the software settings.
C Accident Sheet
Use this form to record any failures that occur in your server.
Product names Expressions and abbreviations
PRIMERGY RX100 S2 This server, or server
Microsoft Windows Server 2003, Standard Edition Windows Server 2003, Standard Edition or Windows 2003
Microsoft Windows 2000 Server Windows 2000 Server or Windows 2000
1
2
Contents
A Configuration Sheet
A.1 Hardware Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A.2 BIOS Setup Utility Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
A.3 System Resource Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A.4 RAID Design Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
B Design Sheet
B.1 RAID Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
B.2 Disk Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
B.3 OS Wizard (Windows 2003 Install Wizard) . . . . . . . . . . . . . . . . . . . . . . . . 13
B.4 OS Wizard (Windows 2000 Install Wizard) . . . . . . . . . . . . . . . . . . . . . . . . 18
B.5 Application Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
C Accident Sheet
A.1 Hardware Configuration
A Configuration Sheet
Use this form to record the hardware configuration and various settings of your
server.
Fill-in (or mark in some way) the checkboxes (❑) appropriate for your server.
A.1 Hardware Configuration
� The internal CD-ROM drive unit
� The internal hard disk units
� CPU
� Memory
Installed position Product ID
CD-ROM drive bay ❑ CD-ROM ATAPI
Installed
positionInstallation internal hard disk units
Bay 1 ❑ 36.4GB ❑ 73.4GB ❑ 146.8GB
Bay 2 ❑ 36.4GB ❑ 73.4GB ❑ 146.8GB
Installation CPU
❑ Celeron® Processor D 330 (2.66GHz / 256KB)
❑ Pentium® 4 Processor 3EGHz / 1MB
* One CPU is installed in all models.
Installation slot Installation memory
Memory slot 1(*) ❍256MB ❑ 512MB ❑ 1GB
Memory slot 2 ❑ 256MB ❑ 512MB ❑ 1GB
Memory slot 3 ❑ 256MB ❑ 512MB ❑ 1GB
Memory slot 4 ❑ 256MB ❑ 512MB ❑ 1GB
* 256MB is installed in memory slot 1 for all models (except when custom made service is used).
3
4
A Configuration Sheet
� Expansion cards
1 2
Eth. Ctrl 1000-BASE-T Cu (PG-1852) - ❑
Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862) - ❑
RAID Ctrl 1-Channel 64MB (PG-141CL1) ❑ -
SCSI Ctrl U160 lp (PG-130L) ❑ ❑
Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L) - ❑
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L) - ❑
-: indicates that this item cannot be installed.
PCI slotExpansion card (Product ID)
A.2 BIOS Setup Utility Parameters
A.2 BIOS Setup Utility Parameters
The marks used in each menu indicate:
❑: Parameters ❍ : Settings at time of purchase ♦: Unchangeable settings
� Main menu
Setting
Enter current time
Enter current date
❑Disabled ❑360KB 5 1/4" ❑1.2MB 5 1/4" ❑720KB 3 1/2"
♦ 1.44/1.25MB 3 1/2" ❑2.88MB 3 1/2"
[Enter]
Type❑User ♦ Auto ❑None ❑ATAPI Removable ❑CD-ROM ❑ IDE Removable
❑Other ATAPI
CHS Format, Cylinders, Heads, Sectors,
Maximum CapacityDisplay/set cylinders/heads/sectors/maximum capacity of the disk.
LBA Format, Total Sectors,
Maximum CapacityDisplay/set total sectors/maximum capacity of the disk.
Transfer Mode ❑Disabled ❑2 Sectors ❑4 Sectors ❑8 Sectors ❑16 Sectors
LBA Translation ❑Disabled ❑Enabled
PIO Mode❑Standard ❑Fast P IO 1 ❑Fast P IO 2 ❑Fast P IO 3 ❑Fast P IO 4
❑FPIO 3 / DMA 1 ❑Fast P IO 4 / DMA 2
32 Bit I/O ♦ Disabled ❑Enabled
Ultra DMA Mode ❑Disabled ❑Mode 0 ❑Mode 1 ❑Mode 2 ❑Mode 3 ❑Mode 4 ❑Mode 5
[Enter]
Type ♦ Auto ❑None
[Enter]
Type ♦ Auto ❑None
[Enter]
POST Errors ❑Disabled ♦ Enabled
Keyboard Check ❑Disabled ❍Enabled
SM Error Halt ❑Disabled ♦ Enabled
Quick Boot ♦ Disabled ❑Enabled
Quiet Boot ❑Disabled ❍Enabled
Memory Testing ❑Disabled ♦ Enabled
Boot Menu ❑Disabled ❍Enabled
Boot Sequence❑CD-ROM Drive ❑Removable Devices ❑Hard Drive
❑ IBA GE Slot 0208 v1217 ❑ IBA GE Slot 0430 v1217
MultiBoot for HDs ❑Disabled ♦ Enabled
Display available base memory size up to 1MB
Display memory size of 1MB or more
Diskette A
Parameters
System Time
System Date
Parallel ATA
Boot Options
Base Memory
Extended Memory
SATA Port 0
SATA Port 1
5
6
A Configuration Sheet
� Advanced menu
Setting
[Enter]
❍Disabled ❑Enabled ❑Auto
❍3F8/IRQ 4 ❑2F8/IRQ 3 ❑3E8/IRQ 4 ❑2E8/IRQ 3
❑System ❍BMC ❑Shared
♦ Local ❑Remote ❑Remote Once
❑Disabled ❍Enabled
❑Disabled ❑Enabled ❍Auto Detect
[Enter]
[Enter]
Device ❑Disabled ♦ Enabled
Option ROM Scan ❍Disabled ❑Enabled
Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h
Device ❑Disabled ♦ Enabled
Option ROM Scan ❍Disabled ❑Enabled
Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h
[Enter]
❑Disabled ♦ Auto ❑ IRQ 3 ❑ IRQ 4 ❑ IRQ 5 ❑ IRQ 7 ❑ IRQ 9 ❑ IRQ 10
❑ IRQ 11 ❑ IRQ 15
❑Disabled ♦ Auto ❑ IRQ 3 ❑ IRQ 4 ❑ IRQ 5 ❑ IRQ 7 ❑ IRQ 9 ❑ IRQ 10
❑ IRQ 11 ❑ IRQ 15
[Enter]
Option ROM Scan ❑Disabled ♦ Enabled
Bus Master ❑Disabled ♦ Enabled
Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h
Option ROM Scan ❍Disabled ❑Enabled
Bus Master ❑Disabled ♦ Enabled
Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h
[Enter]
[Enter]
❑Disabled ♦ Enabled
❑Disabled ❍Enabled
♦ Enabled
♦ 1 ❑10 ❑15 ❑20 ❑30 ❑60
❑Disabled ♦ Enabled
♦ Disabled ❑Enabled
❑Disabled ♦ Enabled
❑Disabled ♦ Enabled
❑Disabled ♦ Enabled
❑Disabled ❍Enabled
❑Disabled ❍Enabled
❑Disabled ❍Enabled
❑Expansion ROM Area ♦ Top of Base Memory
Parameters
Fast String operations
Ethernet on Board
PCI Slot 1 Configuration
PCI IRQ Line 0/VGA
Peripheral Configuration
Serial
Floppy Type
PCI Configuration
Diskette Controller
Base I/O address
Mouse Controller
Serial Multiplexer
PCI Device, Embedded Ethernet A
PCI Device, Embedded Ethernet B
Delay prior to Enabling the TCC
PCI IRQ Configuration
Compatible FPU Code
USB 1.1 Host Controller
USB BIOS Legacy Support
Split Lock operations
PCI IRQ Line 1/ETHERNET B
PCI SLOTS Configuration
Adjacent Sector P refetch
APIC
USB 2.0 Host Controller
BIOS Work Space Location
PCI Slot 2 Configuration
CPU Mismatch Detection
Hyper Threading
L3 Cache
CPU Settings
Advanced System Configuration
A.2 BIOS Setup Utility Parameters
� Security menu
Setting
[Enter]
❑Disabled ❍Enabled
❍Off ❑On
Set Resume Time
❑Disabled ❍Enabled
❑Always OFF ❍Previous State ❑Always ON
❑Yes ❍No
❑Yes ♦ No
❑1.1 ♦ 1.4
❑Disabled ❍Enabled
❑Other ♦ DOS
❑Disabled ♦ Enabled
♦ Legacy IDE ❑Native
♦ Disabled ❑Enabled
Remote
Multiprocessor Specification
Reset Configuration Data
Secured Setup Configurations
Power Failure Recovery
Resume On Time
Resume Time
Power On/Off
S-ATA Interface
Power On Source
Large Disk Access Mode
Parameters
S-ATA Mode
LSI SATA RAID
LAN
Windows 2003 EMS Function
Parameters Setting
Setup Password Displays the existence or nonexistence of a password
System Password Displays the existence or nonexistence of a password
Set Setup Password Set Setup password
Set System Password Set System password
Setup Password Lock ❍Standard ❑Extended
SETUP prompt ❑Disabled ❍Enabled
Virus Warning ♦ Disabled ❑Enabled
System Load ❍Standard ❑Diskette/CDROM Lock
Diskette Write ❑Disabled ❍Enabled
Flash Write ❑Disabled ❍Enabled
7
8
A Configuration Sheet
� Server menu
Setting
❍Disabled ❑Enabled
❍Continue ❑Reset ❑Power Cycle
❍0 ❑0-100( )
❍2 ❑1-30( )
❑0-15( ) ♦ 10
❍3 ❑0-7( )
♦ Disabled ❑Remote Image Disk ❑LAN
♦ Boot Option ❑Diagnostic Boot
♦ 0 ❑1-16( )
❍Disabled ❑Enabled
❍5 ❑0-31( )
[Enter]
Display IPMI Specification Version
Display BMC Firmware version
❍Disabled ❑Enabled
❍Overwrite ❑Maintain
Display number of recorded logs
Display number of remaining recordable logs
Display contents of system event logs
Display contents of system event logs in list mode
Display sensor data including temperature and voltage
[Enter]
Local IP Address Unchangeable
Subnet Mask Unchangeable
Gateway Address Unchangeable
User ID 1 Password Unchangeable
[Enter]
❍Enabled ❑Disabled ❑Failed
[Enter]
DIMM 0 ❍Enabled ❑Disabled ❑Failed
DIMM 1 ❍Enabled ❑Disabled ❑Failed
DIMM 2 ❍Enabled ❑Disabled ❑Failed
DIMM 3 ❍Enabled ❑Disabled ❑Failed
[Enter]
❍Disabled ❑Enabled
♦ Serial
❍Serial ❑LAN
♦ Direct ❑Via modem
❑300 ❑1200 ❑2400 ❍9600 ❑19.2K ❑38.4K ❑57.6K ❑115.2K
❑VT100 ❑VT100, 8bit ❑PC-ANSI, 7bit ❑PC ANSI ❍VT100+ ❑VT-UTF8
❍None ❑XON/XOFF ❑CTS/RTS
❑Standard ❍Enhanced
Parameters
CPU Status
ASR&R Boot Delay (min)
Boot Retry Counter
Diagnostic System
Next Boot uses
O/S Boot Timeout
Diagnostic PXE boot device
Console Redirection
Remaining Event Log number
System Event Log
System Event Log (list mode)
Realtime Sensor Data
CPU Status
Channel A
Channel B
Mode
Timeout value
IPMI Specification Version
BMC Firmware
Critical Temperature Monitoring
Clear Screen Delay (sec)
Power Cycle Delay
IPMI
Clear System Event Log
Event Log Full Mode
Existing Event Log number
Memory Status
LAN Settings
Console Redirection Port
Port
Media Type
Mode
Console connection
Baud Rate
Protocol
Flow Control
A.3 System Resource Chart
A.3 System Resource Chart
� I/O port addresses
The following chart lists the I/O port address.
| | | | | | | | | | | | | | | | | | | | | | | |
Serial port | | | | | | | | | | | | | | | | | | | | | | | | BIOS setup
* indicate the I/O port address space that can be selected in the expansion card.
indicates that some or all of the 16 bytes that follow the marker address may be used
( space selected for default)
indicates that some or all of the 32 bytes that follow the marker address may be used
( space selected for default)
400Product nameI/O port address (h)
Setup method300 340 380 3C0200 240 280 2C0100 140 180 1C0
9
1
A Configuration Sheet
A.4 RAID Design Sheet
� Logical drive information
� System pack definitions
Logical drive
(LD(*))
RAID
levelCapacity
0
1
0
1
0
1
0
1
0
1
0
1
0
1
*: Shown as "HS(*)" for hot spares
12, 13, 14, 158, 9, 10, 11,
15
(CH=0) ID= 0, 1, 2, 3, 4, 5, 6, 7,
11, 12, 13, 14,7, 8, 9, 10,3, 4, 5, 6,(CH=0) ID= 0, 1, 2,
12, 13, 14, 158, 9, 10, 11,
15
(CH=0) ID= 0, 1, 2, 3, 4, 5, 6, 7,
11, 12, 13, 14,7, 8, 9, 10,3, 4, 5, 6,(CH=0) ID= 0, 1, 2,
12, 13, 14, 158, 9, 10, 11,
15
(CH=0) ID= 0, 1, 2, 3, 4, 5, 6, 7,
11, 12, 13, 14,7, 8, 9, 10,
14, 15
(CH=0) ID= 0, 1, 2, 3, 4, 5, 6,
10, 11, 12, 13,6, 7, 8, 9,
Physical drive (CH=0(fixed))
(Example)( 0 ) 36000MB (CH=0) ID= 0, 1, 2, 3, 4, 5,
( )
( )
( )
( )
( )
( )
Installation HDD bay SCSI-CH SCSI-ID Model name Capacity Version LD(*)
(Example) Bay( 1 ) CH= ( 0 ) ID= ( 0 ) MAN3184MC 17521MB 0107 0
(Example) Bay( 2 ) CH= ( 0 ) ID= ( 0 ) MAN3184MC 17521MB 0107 0
(Example) Bay( 3 ) CH= ( 0 ) ID= ( 0 ) MAN3184MC 17521MB 0107 1
(Example) Bay( 4 ) CH= ( 0 ) ID= ( 0 ) MAN3184MC 17521MB 0107 1
Bay( ) CH= ( ) ID= ( )
Bay( ) CH= ( ) ID= ( )
Bay( ) CH= ( ) ID= ( )
Bay( ) CH= ( ) ID= ( )
Bay( ) CH= ( ) ID= ( )
Bay( ) CH= ( ) ID= ( )
Bay( ) CH= ( ) ID= ( )
Bay( ) CH= ( ) ID= ( )
*: Shown as "HS(*)" for hot spares
0
B.1 RAID Wizard
B Design Sheet
When setting up the server using ServerStart, set the default values in advance to
ensure setup is performed smoothly.
B.1 RAID Wizard
Setting
❑ No RAID ❑ Automatic ❑ Manual
❑ Use existing array
RAID Controller ❑ PG-141C1L
Controller Number (Default - 0)
RAID Level ❑ RAID0 ❑ RAID1
Number of Disks Number:
For manual and
auto settingExisting RAID Array ❑ Delete
Configuration mode
For manual and
auto setting
For manual
setting
Parameters
11
1
B Design Sheet
B.2 Disk Wizard
Parameters Setting
Controller Type ❑ RAID
Disk Number (Default - 0)
File System ❑ NTFS ❑ FAT
Quick Format ❑ Yes ❑ No
Label (Default - SYSTEM)
Partit ion Size ❑ Automatic ❑ MB
Partit ion Usage ❑ BOOT ❑ OS ❑ DATA
File System ❑ NTFS ❑ FAT
Quick Format ❑ Yes ❑ No
Label (Default - DATA)
Partit ion Size ❑ Automatic ❑ MB
Partit ion Usage ❑ BOOT ❑ OS ❑ DATA
File System ❑ NTFS ❑ FAT
Quick Format ❑ Yes ❑ No
Label (Default - DATA)
Partit ion Size ❑ Automatic ❑ MB
Partit ion Usage ❑ BOOT ❑ OS ❑ DATA
File System ❑ NTFS ❑ FAT
Quick Format ❑ Yes ❑ No
Label (Default - DATA)
Partit ion Size ❑ Automatic ❑ MB
Partit ion Usage ❑ BOOT ❑ OS ❑ DATA
Erase all existing partit ions on all displayed
disks❑ Delete
Make copies when installing multiple disks or more sheets are needed.
2
B.3 OS Wizard (Windows 2003 Install Wizard)
B.3 OS Wizard (Windows 2003 Install Wizard)
(continued)
Setting
❑ Windows Server 2003, Standard Edition
❑ Windows Server 2003, Enterprise Edition
❑ per Seat
❑ per Server
(Only when concurrent users are selected)
❑ a work group ❑ a domain
(Default - MYUSERGROUP)
❑ Install Operating System from Local CD
❑ Install Operating System from Remote Server
(Default - (GMT+01:00) Amsterdam, Berlin,
Bern, Rome, Stockholm, Vienna)
❑ Use Default ❑ Drive Letter
❑ C: ❑ D: ❑ E: ❑ F: ❑ G: ❑ H: ❑ I: ❑ J: ❑ K: ❑ L: ❑ M: ❑ N:
❑ O: ❑ P: ❑ Q: ❑ R: ❑ S: ❑ T: ❑ U: ❑ V: ❑ W: ❑ X: ❑ Y: ❑ Z:
❑ Use Default ❑ Prompt User
❑ Specify now
(Default - \winnt)
❑ ― ― ― ―
❑ 640 * 480 ❑ 800 * 600 ❑ 1024 * 768 ❑ 1156 * 864
❑ 1280 * 1024 ❑ 1600 * 1200
❑ 60 ❑ 70 ❑ 72 ❑ 75 ❑ 80 ❑ 85 ❑ 100
❑ 16 colors ❑ 256 colors ❑ High Color (16bits)
❑ T rue Color (24bits) ❑ T rue Color (32bits)
Password for Administrator
Installation method
Installation destination
When selecting drive name
When installing OS from remote server
User account to create computer account
Password
Remote Source Path
Remote Username
Installation Directory
T ime Zone
Installation Drive
Remote Password
Organization
Computer Name
User Name
Display settings
BitsPerPel
Resolution
Product-ID
VRefresh
User Name
Parameters
Install Windows 2003
Installation Directory and Time zone
Computer Identification
Operating System Type
License Mode
User permitted
will participate in
Workgroup or Domain Name
User account
13
1
B Design Sheet
Copy to install multiple adapters.
(continued)
Setting
❑ Install Unattended
❑ Install Manually
❑ TCP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple Talk ❑ DLC
❑ NetMon ❑ PPTP
❑ Use DHCP
IP-Address
Subnet Mask
Default Gateway
IP-Address (additional) (only when added)
Subnet Mask (additional) (only when added)
Default Gateway (additional) (only when added)
DNS domain name (only when specified)
DNS server address (only when specified)
Use WINS ❑ Use
WINS server address DHCP (only when selected to use)
❑ Use NetBIOS setting from the DHCP Server
❑ Use NetBIOS over TCP/IP
❑ Do not use NetBIOS over TCP/IP
Internal network number 0x
Network number 0x
Packet Type❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3
❑ Ethernet SNAP ❑ Auto-detection
❑ TCP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple Talk ❑ DLC
❑ NetMon ❑ PPTP
❑ Use DHCP
IP-Address
Subnet Mask
Default Gateway
IP-Address (additional) (only when added)
Subnet Mask (additional) Setting
Default Gateway (additional) (only when added)
DNS domain name (only when specified)
DNS server address (only when specified)
Use WINS ❑ Use
WINS server address DHCP (only when selected to use)
❑ Use NetBIOS setting from the DHCP Server
❑ Use NetBIOS over TCP/IP
❑ Do not use NetBIOS over TCP/IP
Internal network number 0x
Network number 0x
Packet Type❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3
❑ Ethernet SNAP ❑ Auto-detection
NetBIOS option
Connection name
Use of DHCP (When TCP/IP selected)
Only when NWIPX is selected
A
d
a
p
t
e
r
2
Available protocols
D
o
n
o
t
u
s
e
D
H
C
P
Only when NWIPX is selected
NetBIOS option
Connection name
Use of DHCP (When TCP/IP selected)
Parameters
Network protocol
Network protocol property (for install unattended)
Installation method
Available protocols
D
o
n
o
t
u
s
e
D
H
C
P
A
d
a
p
t
e
r
1
4
B.3 OS Wizard (Windows 2003 Install Wizard)
(continued)
Setting
❑ Install default Components
❑ Install customized Components
Accessories
❑ Clipboard viewer
❑ Desktop Wallpaper
❑ Document Template
❑ Paint
❑ All available mousepointers
❑ Word pad
❑ Calculator
❑ Character Map
Accessibility Wizard ❑ Install
Communications❑ Chat
❑ Hyper Terminal
ASP.NET web development platform ❑ Install
Application server console ❑ Install
Internet information services
(IIS)
❑ FrontPage 2002 Server Extensions
❑ FTP (File Transfer P rotocol) service
❑ NNTP Service - NNTP Service
❑ SMTP Service - SMTP Service
❑ World Wide Web Server - Internet Information Services ASP support
❑ World Wide Web Server - Internet Information Services web DAV publishing
❑ World Wide Web Server - World Wide Web (WWW) Service
❑ World Wide Web Server - Internet Information Services internet data connector
❑ World Wide Web Server - Internet Information Services web user interface
❑ Management Console - based administration tools for IIS
❑ Internet Information Services
Network COM + access ❑ Install
DTC network access ❑ Install
❑ Install
❑ Install
❑ Install
❑ Install
❑ Install ❑ Server components of the Certificate Service
❑ Web client component of the Certificate Services
□ Install □ POP3 main service □ POP3 web user interface
(Default - \Inetpub\Ftproot)
(Default - \Inetsrv\WWWroot)
❑ Permit remote desktop during unattended setup
❑ Access permit compatible with Windows 2000 Users
❑ Access permit compatible with Terminal Server 4.0 Users
❑ Number of simultaneous users ❑ Number of connected sessions
❑ Application server mode ❑ Remote management mode
Application and utilit ies
Application server
WWW service property (only when WWW service is se lected)
Select installation method
Software Components
FTP site directory
Indexing Server Files
Terminal Services
Terminal Services licensing
Remote Installation Services
Certificate Service
POP3 root component
FTP service property (only when FTP service is se lected)
Current mode for terminal service
WWW server directory
Terminal server property (only when terminal server is se lected)
Authorize the following access permits
to terminal service users
Terminal service
License Mode
Only when selecting components to install
Parameters
15
1
B Design Sheet
(continued)
Setting
❑ Services for Macintosh (SFM)
❑ Print Service for Macintosh
❑ Print Service for UNIX
❑ WINS Server
❑ Internet Authentication Service (IAS)
❑ MS DNS Server
❑ Simple TCP/IP Service
❑ MS DHCP Server
❑ Network Monitor tools
❑ SNMP Service (Required to install SNMP-ServerView)
❑ Send
❑ Receive
(only when specified)
❑ Physical ❑ Datalink and sub network
❑ End-to-End ❑ Application ❑ Internet
Services
Other network file and Print Services
Send authentication trap
Receivable community name
Host name
Contact
Address
Agent
Service
Community name
Trap destination
SNMP details (only when SNMP is se lected)
Parameters
Management and Monitoring Tools
Networking Services
Security
Receive SNMP packet from all hosts
Trap
6
B.3 OS Wizard (Windows 2003 Install Wizard)
Setting
❑ Install
❑ Create a domain in a new forest
❑ Additional domain controller of the existing domain
❑ Create a new child domain under the existing domain tree
❑ Create a new domain tree in the existing forest
❑ Permit
Password
Domain name
Complete DNS name of the new domain
Domain NetBIOS name
Complete DNS name of the new domain
New child domain name
Domain NetBIOS name
User name
Create a new domain tree in the existing forest (only when selected)
Complete DNS name of the new domain
User name
Password
Domain
Create a new child domain under the existing domain tree (only when selected)
Domain NetBIOS name
User name
Password
Domain
Additional domain controller of the existing domain (only when selected)
Log folder
SYSVOL folder location
Install Active Directory
Complete DNS name of the new domain
Create a domain in a new forest (only when selected)
Compatibility with Windows 2000 or
earlier server OS
Database folder
Active Directory type
Active Directory details se tting (only when DNS is se lected)
Parameters
17
1
B Design Sheet
B.4 OS Wizard (Windows 2000 Install Wizard)
(continued)
Setting
❑ Windows 2000 Server
❑ Windows 2000 Advanced Server
❑ per Seat
❑ per Server
(Only when concurrent users are selected)
❑ a work group ❑ a domain
(Default - MYUSERGROUP)
❑ Install Operating System from Local CD
❑ Install Operating System from Remote Server
(Default - (GMT+01:00) Amsterdam, Berlin,
Bern, Rome, Stockholm, Vienna)
❑ Use Default ❑ Drive Letter
❑ C: ❑ D: ❑ E: ❑ F: ❑ G: ❑ H: ❑ I: ❑ J: ❑ K: ❑ L: ❑ M: ❑ N:
❑ O: ❑ P: ❑ Q: ❑ R: ❑ S: ❑ T: ❑ U: ❑ V: ❑ W: ❑ X: ❑ Y: ❑ Z:
❑ Use Default ❑ Prompt User
❑ Specify now
(Default - \winnt)
❑ ― ― ― ―
❑ 640 * 480 ❑ 800 * 600 ❑ 1024 * 768 ❑ 1156 * 864
❑ 1280 * 1024 ❑ 1600 * 1200
❑ 60 ❑ 70 ❑ 72 ❑ 75 ❑ 80 ❑ 85 ❑ 100
❑ 16 colors ❑ 256 colors ❑ High Color (16bits)
❑ T rue Color (24bits) ❑ T rue Color (32bits)
Remote Username
User Name
Display settings
BitsPerPel
VRefresh
Workgroup or Domain Name
Parameters
Install Windows 2000
Installation Directory and Time zone
Computer Identification
License Mode
OS
Password for Administrator
User account to create computer account (only when Domain is selected)
User permitted
will participate in
Installation Directory
When selecting drive name
User account
Remote Password
Installation method
Password
When installing OS from remote server
T ime Zone
Installation Drive
Remote Source Path
Installation destination
User Name
Organization
Computer Name
Resolution
Product-ID
8
B.4 OS Wizard (Windows 2000 Install Wizard)
Copy to install multiple adapters.
(continued)
Setting
❑ Install Unattended
❑ Install Manually
❑ TCP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple Talk ❑ DLC
❑ NetMon ❑ PPTP
❑ Use DHCP
IP-Address
Subnet Mask
Default Gateway
IP-Address (additional) (only when added)
Subnet Mask (additional) (only when added)
Default Gateway (additional) (only when added)
DNS domain name (only when specified)
DNS server address (only when specified)
Use WINS ❑ Use
WINS server address (only when selected to use WINS)
❑ Use NetBIOS setting from the DHCP Server
❑ Use NetBIOS over TCP/IP
❑ Do not use NetBIOS over TCP/IP
Internal network number 0x
Network number 0x
Packet Type❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3
❑ Ethernet SNAP ❑ Auto-detection
❑ TCP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple Talk ❑ DLC
❑ NetMon ❑ PPTP
❑ Use DHCP
IP-Address
Subnet Mask
Default Gateway
IP-Address (additional) (only when added)
Subnet Mask (additional) (only when added)
Default Gateway (additional) (only when added)
DNS domain name (only when specified)
DNS server address (only when specified)
Use WINS ❑ Use
WINS server address (only when selected to use WINS)
❑ Use NetBIOS setting from the DHCP Server
❑ Use NetBIOS over TCP/IP
❑ Do not use NetBIOS over TCP/IP
Internal network number 0x
Network number 0x
Packet Type❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3
❑ Ethernet SNAP ❑ Auto-detection
Network protocol
Network protocol property (for install unattended)
Connection name
A
d
a
p
t
e
r
2
Available protocols
D
o
n
o
t
u
s
e
D
H
C
P
Only when NWIPX is selected
D
o
n
o
t
u
s
e
D
H
C
P
Installation method
Available protocols
A
d
a
p
t
e
r
1
Only when NWIPX is selected
NetBIOS option
Use of DHCP (When TCP/IP selected)
Connection name
Parameters
NetBIOS option
Use of DHCP (When TCP/IP selecte
19
2
B Design Sheet
(continued)
Setting
❑ Install default Components
❑ Install customized Components
❑ (IIS) common components
❑ (IIS) online help
❑ FTP (File Transfer P rotocol) server
❑ Internet service manager (HTML)
❑ Internet information service snap-in
❑ NNTP Service
❑ SMTP Service
❑ WWW (World Wide Web) server
❑ Remote install service
❑ Remote storage
❑ Terminal service
❑ Terminal service license
❑ Terminal service client creator file
❑ Index service
❑ COM Internet service proxy
❑ FrontPage 2000 Server Extensions
❑ Certificate service
❑ Certificate service web registration support
❑ Certificate service CA
(Default - \Inetpub\Ftproot)
(Default - \Inetsrv\WWWroot)
❑ Hyper terminal ❑ Dialler
❑ Chat ❑ Message queue service
❑ Other network file and Print Service
❑ CD player ❑ Media player
❑ Utopia sound setting ❑ Sound recorder
❑ Volume control ❑ Sample sound
❑ Accessibility setting wizard ❑ Character Map
❑ Calculator ❑ Paint
❑ Word pad ❑ Document Template
❑ Script debugger ❑ Object packager
❑ Desktop Wallpaper ❑ Mousepointer
❑ Free cell ❑ Mine sweeper ❑ Pinball ❑ Solitaire
❑ Simple Network Management P rotocol (SNMP)
❑ Domain Name System (DNS)
❑ Dynamic Host Configuration Protocol (DHCP)
❑ Windows Internet Name Service (WINS)
❑ Simple TCP/IP service
❑ Network Monitor tool
❑ Internet authentication service
❑ Site Server ILS service
❑ P rint service for UNIX
❑ P rint service for Macintosh
❑ Connection manager component
❑ File service for Macintosh
WWW server directory
FTP site directory
Service
Select installation method
Software Components
Parameters
Communications
Multimedia
Accessories
Service
Service
Game
Only when selecting components to install
0
B.4 OS Wizard (Windows 2000 Install Wizard)
Setting
❑ Send
❑ Receive
(only when specified)
❑ Physical ❑ Datalink and sub network
❑ End-to-End ❑ Application ❑ Internet
❑ Install
❑ Create a new forest of a domain tree
❑ Add additional domain controller of the existing domain
❑ Add a new child domain under the existing domain tree
❑ Place a new domain tree in the existing forest
❑ Permit
Database location
Security
Contact
Service
Community name
Receive SNMP packet from all hosts
Receivable community name
Trap destination
Send authentication trap
SNMP details (only when SNMP is se lected)
Install Active Directory
Active Directory details setting (only when DNS is se lected)
Complete DNS name of the new tree
Domain
User name
Password
Place a new domain tree in the existing forest (only when selected)
Complete DNS name of the domain
Domain
Log location
Domain name
Add a new child domain under the existing domain tree (only when selected)
User name
Password
Add additional domain controller of the existing domain (only when selected)
Access permit compatibility with
Windows 2000 or earlier server
SYSVOL folder location
Create a new forest of a domain tree (only when selected)
Domain NetBIOS name
Parent domain name
Child domain name
Domain NetBIOS name
Complete DNS name of the new tree
Domain NetBIOS name
User name
Password
Parameters
Active Directory type
Address
Host name
Trap
Agent
21
2
B Design Sheet
B.5 Application Wizard
Setting
❑ Windows 2000 service pack
❑ ServerView
❑ DSNAP
(only when selecting additional software)
❑ Install selected application from Local CD
❑ Install selected application from Remote Server
❑ Install ❑ Do not install
Remote Resource Path
Remote Username
Remote Password
When installing from remote server
Parameters
Installation method
Installable applications
Userspecific Command
2
C Accident Sheet
Name(Product ID)
OS
Phase of accident
DATE/TIME
LAN/WAN config.
Environment
PRIMERGY RX100 S2 (PG )
What did you do?, what message? etc.
Attached paper Yes/No
For optional configuration and settings, use Configuration Sheet in the section A.
23
• The contents of this manual may be revised without prior notice.
• Fujitsu assumes no liability for damages to third party copyrights or other rights
arising from the use of any information in this manual.
• No part of this manual may be reproduced in any form without the prior written
permission of Fujitsu.
PRIMERGY RX100 S2
Configuration Sheets
B7FH-3371-01ENZ0-00
Issued on
Issued by
September, 2005 FUJITSU LIMITED