ABOUT OUR COMPANY - · PDF fileABOUT OUR COMPANY TMS, Inc. is also a ... call us toll-free on your custom requirements or fill out our form. ... MBITR - Multicharger P/N: TMS040271

ABOUT OUR COMPANY

TMS, Inc. is also a designer and manufacturer of custom military storage and transit container systems. Our specialty is the design of deployable combat packaging. Our goal is to provide the highest level of protection and durability for the equipment, coupled with superior utilization in the field. Portability, size, weight, palletization, stackability, and cost are considerations given every design.

TMS accepts IMPAC, MasterCard, and VISA orders. Designs can be ordered via DD form 1348-6 and Air Force form 2005. When ordering, please specify the design number, case color and any special options you require. Include a copy of our Container Specifications to assure design compliance. Custom designs are our specialty! Please call us toll-free on your custom requirements or fill out our form.

POLYETHYLENE CONTAINER SPECIFICATIONS

• Container shell shall be rotationally molded of virgin polyethylene meeting the requirements of Federal Specification L-P-390 Type 1,Class M or H, Grade 2.

• Container corners and edges shall be a minimum of 10% thicker than flat walls and surfaces.

• Container shall be rectangular in design with rounded corners and edges. • Lids and body shall have no structural seams or joints to fatigue or leak. • Integral case structure shall have dynamic impact strength in an operational range of

-20 to +140 degrees F. • Vertical recesses shall be molded in to provide protected areas for attachment of all

hardware and to provide columnar strength. • Male stacking ribs shall be molded into the top surface of the container with

corresponding female ribs molded into the bottom surface for enhanced stacking and palletization.

• Air-tight container designs shall be accomplished using a tongue-in-groove parting line with a pressure relief valve and a closed loop silicon gasket.

• The parting line shall be formed as part of the container during the molding process. • Indexing and anti-shear features shall be molded into the parting line at each

catch/strike and hinge location. • Low profile wing-turn cam-action fasteners shall be located on the container body,

with corresponding strikes located on the container lids. • Strikes, catches and hinges shall be attached via stainless steel rivets to metal

inserts molded into the container wall. • Container color shall be pigmented throughout. • Hardware shall be standard 1010 steel with an electroplated yellow zinc chromate

finish in accordance with ASTM B 633, Type II. Lusterless black stainless steel

TABLE OF CONTENTS

Military Cases

Comm Gear CasesFCC 100Giant VoiceGround RodHPA

LMR - TDC ICAPMBITRPhonesPRCPromina Heavy HubPSC5, Shadowfire RepeatersRMC CoversSAT PhonesSB22 and SB22ASensor Guard RouterScope ShieldSincgarsTSSRURC119Vehicle Power AdapterOther Comm Gear Cases

Electronics and Gear CasesDouble Entry Shock Mounted

Field Gear CasesAluminum Tables ATVCamouflage PolesCompressorDunnageLight KitsPionjarScalesTentTent Stove HeatersTowbar

Land Mobile Radio

General Purpose Storage and TransportBenchstockFootlockerGeneral Purpose (GP)MRSP and DrawersTrunk Locker

TABLE OF CONTENTS ...continued

Mobile Office Bookcase

Desktop Computer w- Printer-Mole

Field Desk Double Duty Field Desk

Laptop and NotebookModular Data TerminalPrinter-Multifunction MachineOther Mobile Office

Power ProductionGenerator Case

Stereo - TV - VCR – DVDTV CaseTV-VCR-DVDReceiver-CD Player Case

Weapons Berretta-Glock 9mm

M2 M4

M16 and RifleM9MK19M24M60M240BM249 SAW

Safety Fire Extinguishers

Gas Bottle CasesHelmetMedical Gear

FATADSFatads

AccessoriesOptions

Industrial Cases

Carry Lite CaseFlangemountGrab and RollPlasma DisplayProRack

Manufacturers Represented

Comm Gear Cases

FCC 100

Giant Voice Ground Rod

HPA

Land Mobile Radio

LMR

TDC ICAP

MBITR

Phones

PRC

Promina Heavy Hub

Repeaters

RMC Covers

SAT Phones

SB22 and SB22A

Sensor Guard Router Scope Shield

Sincgars TSSR

URC119

Vehicle Power Adapter

Other Comm Gear Cases

PSC 5, Shadowfire

-

FCC 100 Spares Kit - Peck V P

esign yetomplete support of FCC100

/N: TMS020761

• Custom Foam Insert – Best D• Holds all spares required for c• 1 Power Supply• 1 Fan,
• 18 PCI Cards • 40 Port Cards • 32 Daughter Cards• 48 Termination Cards• Misc. Cable Storage• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

thylene

HPA- High Power Amp CaseP/N: TMS020420

• 1’ Foam Lining• Rotationally Molded Polye
• Available in Gray, OD Green, or
Desert Tan

TMS020430

•Holds 4 Controllers (sized to fit specific controllers)•Custom Foam Insert •Rotationally Molded Polyethylene•Available in Gray, OD Green, or Desert Tan

P/N: TMS010820

•This container is injection molded of virgin polyethylene and comes with edge casters on one end for easy transport.•The custom insert will hold up to 20 ground rods.•The smaller container holds the wing nuts used to attach the ground wire.

HPA Controller Case

Ground Rod

XTS5000 LMR, Charger and Spare Battery Case P/N: TMS030670

• Holds Qty 6 XTS 5000 Radios with Batteries• Qty 6 Spare Batteries, and Qty 1 Six Battery Charger Unit.• Gives you a complete kit for incremental deployments all in one case• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

XTS5000 Spare Battery Case (42 Batteries) P/N: TMS080475

• Holds Qty 42 Batteries• Custom Insert• Lifetime Warranty• Injection Molded Polyethylene• Available in Black

See TDC ICAP for Other LMR Cases

TDC ICAP Cases

TDC ICAP CasesRotationally Molded with Airtight construction and PRV. All LMR and Accessory Cases utilize the same case “footprint” to provide secure stacking on the pallet, while maintaining the smallest overall volume. Modular designs support KTEA, KTEB, KTEC, and KTED configurations

XTS5000 LMR P/N TMS041071

• Custom Foam Insert to hold a total of 20 LMR’s and 40 Batteries

• OD, Desert Tan, or Gray Color• Cases Required: KTEB – Qty 2, KTEC – Qty 2, KTED – Qty 1

XTS5000 Multi-charger Case P/N TMS040172

Custom Foam Insert to hold 2 Motorola Multi-chargers OD, Desert Tan, or Gray Color Cases Required: KTEB – Qty 4, KTEC – Qty 3, KTED –Qty 4

•

••

XTS5000 Single Unit Charger Case P/N TMS041073

Custom Insert to hold 10 Single Unit Chargers OD, Desert Tan, or Gray Color Cases Required: KTEB, KTEC, or KTED – Qty 1 each package

•

••

XTS5000 Base Station Cases
P/N TMS041074
• Custom Insert to hold 2 Consolette Base Station

• OD, Desert Tan, or Gray Color • Cases Required: KTEB – Qty 3, KTEC- Qty 7, KTED- Qty 3

Iridium Phone Kit CaseP/N TMS050798

• Case holds one complete phone

• Black or OD Green

• Cases Required: KTEA - Qty 1 Lifetime Warranty•

with charger and antenna

TMS Number Case Description UTC Package Qty TDCTDC LMR and Accessory Cases KTEA KTEB KTEC KTED Total NotesTMS050798 Iridium Phone, Single Phone Case 2 2TMS041071 20 LMR + 40 Batteries 2 2 1 5TMS041072 Multicharger, 2 per case 4 3 4 11TMS070476 EF Johnson Multicharger, 2 per case 4 3 3 11TMS041073 Single Unit Charger, 10 per case 1 1 1 3TMS041074 Base Station, 2 per case 3 7 3 13TMS040475 TDC Antenna Case 1 1 1 1TMS070670 TDC LMR Programming Case 1 1 1 3TMS070671 TDC LMR Mast Support Case 1 1 1 3TMS070672 TDC LMR Support Case 1 1 1 3

STE Case Options TMS020662 STE Phones, 10 per case 2 2 1 5 Optional Edge Casters

TMS021075 STE Phones, 5 per case 4 4 2 10TMS021099 STE, Single Phone Case 20 20 10 50

PSC-5D Case OptionsTMS050378 PSC 5D SatCom Kit 1 1 1 3TMS050379 PSC 5D Complete Radio Kit (Blackjack) 1 1 1 3 Optional Edge Casters TMS050380 PSC 5D 2 Spare Radios Only 1 1 1 3

Summary Case Usage Chart

TMS080471 TDC 20 LMR + 40 BatteriesTMS080472 TDC Multicharger, 2 per case

TMS080476 EF Johnson Multicharger, 2 per case

TMS080473 TDC Single Unit Charger, 10 per caseTMS080474 TDC Base Station, 2 per caseTMS080475 TDC XTS5000 Spare Battery Case (42 batts)

STORM Versions

TMS080477 XTS5000 - 6 Radios + Multicharger + 6 Spare

STE Phone Case - 10 Phones P/N TMS020662

• Custom Insert holds 10 phones

• OD, Desert Tan, or Gray Color • Cases Required: KTEB - Qty 2,

KTEC – Qty 2, KTED – Qty 1

with handsets and power supplies

EF Johnson Multicharger Kit P/N TMS070476

• Custom Insert to hold two Multichargers• OD, Desert Tan, or Gray Color • Cases Required: KTEB - Qty 4,


TDC Antenna Case P/N TMS040475

Custom Insert to hold 2 AntennasInjection Molded

••

Lifetime Warranty •Black•

STE Phone Case - 5 Phones P/N TMS021075

Custom Insert holds 5 phones withhandsets and power suppliesOD, Desert Tan, or Gray Color Cases Required: KTEB - Qty 4,


•

••

STE Case, 10 UpP/N TMS040801

• Custom Insert for STE Phones, Power Supplies and Handsets.

••

•

Heavy Rotomold Case DesignMore compact design - 25% SmallerCase Volume than TMS020662Lift out tray like TDC LMR Case - TMS040171

LMR Programming Case P/N TMS070670

Rotationally MoldedOD, Desert Tan, or Gray Color

••

LMR Mast Support Case P/N TMS070671

OD, Desert Tan, or Gray Color ••

LMR Support Case P/N TMS070672

Rotationally Molded

OD, Desert Tan, or Gray Color ••

Rotationally Molded

P/N TMS080471Storm Version of TDC 20 LMR Radios + 20 Batteries

P/N TMS080472Storm version of TDC Multicharger, 2 per case

STORM Versions

Waterproof Construction ••

Injection Molded Design

Available in Black ••

Lifetime Warranty




Lifetime Warranty

P/N TMS080473Storm version of TDC Single Unit Charger, 10 per case




Lifetime Warranty

P/N TMS08047 6Storm version of EF Johnson Multicharger, 3 per case

P/N TMS080474Storm version of TDC Base Station, 2 per case

P/N TMS080475Storm version of TDC Motorola XTS5000 Spare Battery Case (42 batts)




Lifetime Warranty




Lifetime Warranty




•• Lifetime Warranty

MBITR - MultichargerP/N: TMS040271

• Injection Molded Case• Custom Insert

STE Phone Case - Single Phone

P/N: TMS021099

• Injection Molded Design• Waterproof Construction• Lifetime Warranty• Available in Black, OD Green, or Yellow

P/N TMS080477Storm version of XTS5000 - 6 Radios + Multicharger + 6 Spare




Lifetime Warranty

STE Phone Case – 5 PhonesP/N: TMS021075

• Holds 5 Phones• Custom Foam Insert• Rotationally Molded Design• Available in Gray, OD Green, or

Desert Tan

STE Phone Case –10 Phones P/N: TMS020662

• Holds 10 Phones• Custom Foam Insert• Rotationally Molded Polyethylen• Available in Gray, OD Green, or

Desert Tan

KY 68 Crypto Phone Case P/N: TMS040275

• Single Phone Case• Custom Insert• Injection Molded

KY 68 Phone Case P/N: TMS020140

• Single KY68 with Power Supply• Custom Insert• Injection Molded Polyethylene

Motorola and ATT Secure Phone Kit P/N: TMS040199

• Injection Molded Case• Custom insert for all accessories

STU3 Phone Case P/N: TMS040274


PRC117FT KitP/N: TMS030586


PRC150 Base Station CaseP/N: TMS0707472

• Custom insert for Base Station and Speaker

PRC150 Base Station Accessories CaseP/N: TMS070473

PRC148/152 Radio Case for Qty 8 RadiosP/N: TMS081170

• Injection Molded Lifetime Case Warranty• Custom insert for 8 Radios, 8 Antennas, 8Mics (no Spare Batteries)

PRC152 Radio Case for Qty 8 RadiosP/N: TMS081173

• Heavy Rotomold Case Design

• Custom insert for Base Station Backplate, Coupler, Backpack, and Coax • Heavy Rotomold Case Design

• Injection Molded Lifetime Case Warranty• Custom insert for 8 Radios, 8 Antennas, 8 Spare Batteries (no mics)

PSC5 Complete Radio Kit

P/N : TMS050379

• Holds Complete PSC5 Radio Kit

PSC5 Satcom Radio Kit

P/N : TMS0503978

• Holds All Radio and SATCOM KIT •••• Stacks with TMS050379

Rotationally Molded DesignWaterproof ConstructionAvailable in Gray, OD Green, or Desert Tan

•••

Rotationally Molded DesignWaterproof ConstructionAvailable in Gray, OD Green, or Desert Tan

Repeaters -AN/TRC207P/N: TMS040190

• Rotationally Molded Polyethylene• Available in OD or Desert Tan

PSC5 Satcom Antenna CaseP/N : TMS080460

RMC Covers P/N: TMS960720

• Replacement lids for the original thermal set plastic TD-1234. • These lids are made of aluminum and will not crack or deform under normal use. • Lid catches are designed with spring tensioning built in to eliminate over stressing of the "O" ring gasket. • Size and shape of lid is same as radio, without bulging corners. • Lids are stronger and cost less; no tooling charges involved. • Available in single quantities.

Iridium – Single Phone - Compact Case P/N: TMS021090

• Injection Molded Design • Waterproof Construction • Lifetime Warranty • Available in Black, OD Green, or Yellow

Iridium – Single Phone with Charger P/N: TMS021091

• Injection Molded Design • Waterproof Construction • Lifetime Warranty • Available in Black, OD Green, or Yellow

Iridium – Single Phone with Docking Station P/N: TMS021092


Iridium – 2 Phones per caseP/N: TMS041075

• Supports TDC ICAP TEA Package

Iridium Phone Case – 5 Phones P/N: TMS021093

• Holds 5 Phones• Injection Molded Design• Waterproof Construction• Lifetime Warranty• Available in Black, OD Green, or Yellow

Iridium Phone Kit P/N: TMS020593

• Injection Molded Design

• Waterproof Construction• Lifetime Warranty• Available in Black, OD Green, or Yellow

Mini M Inmarsat P/N: TMS040193

• Injection Molded Case • Custom Insert for Radio and all accessories


• Complete Iridium Phone Kit

• Custom Insert

Storm M4 Inmarsat P/N: TMS040196

• Custom Insert for Radio and all accessories

SB22 and SB22A P/N: TMS030378

• Injection Molded Case• Custom Insert fits either unit

• Injection Molded Case• Waterproof• Lifetime Warranty

Sensor Guard Router-Sensor Guard Router Kit P/N: TMS040192

Scope Shield- Multicharger

P/N: TMS040292

• Injection Molded Case• Custom Insert

TSSR Transceiver Cases P/N: TMS010610

• O.D. Green, rotationally molded weather resistant container withstands greater temperature extremes.

• Designed for overall protection of the TSSR transceiver in transit and storage.

URC119 Antenna P/N: TMS940710

• Standard O.D. Green, rotationally molded container includes a 19" E.I.A. shock mounted rack.

• All hardware is black lusterless stainless steel.• Airtight design with full gasketing and PRV.• Also includes a set of four 3.5" removable casters, store-in-lid kit for the casters. • A 22"x16" cable storage pouch.• A 25" sliding shelf for mounting of 2KY-99's and power supply.• Lid hangers for storage of lids on the side of case.• Custom polyethylene foam insert has cavities for the equipment.

Vehicle Power Adapter P/N: TMS030587


TRN26 Tripod Case P/N: TMS021080

• Special 70 inch long design- others by request• Rotationally Molded Polyethylene• 1” Foam Lining• Available in Gray, OD Green, or Desert Tan

P/N: TMS020592

• Holds all pieces f or Mast Assy• Includes cavity for Sledge Hammer• Custom Foam Insert• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

P/N: TMSXXXXXX

• O.D. Green, rotationally molded polyethylene double entry container with yellow zinc plated hardware and a 19" aluminum shock mitigating suspension rack.• Front and rear lids are removable and can be stored on the sides of the container when not in use.• Cases are available in standard heights of 4U to 26U and are available with main body depths from 18" to 27".• Two different depths of lids are also available.• The cases are configured to hold from 40 lbs to more than 400 lbs of equipment.• Multiple colors and accessories such as drawers and shelves are available.

Mast and Accessories Case

Shock Mounted - Double Entry

P/N: TMSXXXXXX

• Mac Rack sizes are now 3U to 14U heights with a rack depth of 20 inches. • Choice of 2" lids, 5" lids or one of each. The 5" lids come standard with built-in edge casters for easy rolling.• Handles on all four sides of the cases make them easy to handle and to transport. • Choose from stainless steel or black colbalt plated hardware. • Positive anti-shear locks.• Molded-in stacking ribs. Molded tongue-in-groove gasketed parting line. • Elastomeric shock mounts. • Airtight seals.• Available in Gray, OD Green, or Desert Tan• Note: Reduced sway space in this rack.• Successfully passed ASTM 4169 DC 18 testing for government/military shipping.

P/N: TMS050792 Rev A.

• Rotationally Molded • Custom Insert • Pressure Releif Valve • Available in Gray, OD Green, or Desert Tan

MAC Rack

FMQ - 19 Weather Station Calibration Kit Case

Aluminum Tables P/N: TMSXXXXXX

• Top panels, cross bracing, and end caps of the tables are high strength allow 6063-T6 extrudedaluminum with a smooth powder coat finish for extra long life.

• The top surface of the table is .080" thick with intragal stiffener ribs forsuperior strength.

• The powder coated finish is extremely durable and provides the best protection availableagainst scratching, peeling and abrasion.

• The tabletop will support up to 1600 lbs of distributed weight.• All aluminum legs are tested to exceed 1100 lbs of direct weight.

TMS Number Size in Inches Leg Style Color TMS983510 18x60 H Leg Brn TMS983511 18x72 H Leg Brn TMS983512 18x96 H Leg Brn

H Leg Brn H Leg Brn H Leg Brn H Leg Brn H Leg Brn H Leg Brn Indiv Brn

TMS080486 24x60 TMS080487 24x72 TMS080488 24x96 TMS983514 30x60 TMS983515 30x72 TMS983516 30x96 TMS030472 30x48
TMS030590 36x60 H Leg Brn TMS030591 36x72 H Leg Brn TMS030592 36x96 H Leg Brn

ATV/Motorcycle Helmet Case P/N: TMS020660

• Holds 5 Full Face Helmets• Custom Foam Insert• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

ATV - Winch Case P/N: TMS020664


Camouflage Poles P/N: TMS021084

• The Camouflage Case can be built in a variety of colors; the most common of which are O.D. Green, Desert Tan, or Forest Green.• This case is available in a variety of sizes to fit the specific application, Call TMS with your application.

P/N: TMS020661

• Designed for Compressor and Hoses• Custom Foam Insert• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Compressor and Accessories

P/N: TMS994153

• Dunnage was designed specifically for use withthe 463L Air Cargo Pallet and support the 10,000lb. uniform weight requirement.

• Each section of dunnage is made of 700 HDPE 2polyethylene that will not split, rot, or corrode andhas compression strength of 3000 PSI.

• Each tube measures 88"x3.5"x3.5" and weighsapproximately 1/3 as much as wooden 4" X 4".

• Unlike the wooden dunnage the polyethylenedunnage is not subject to by microorganisms.

• Dirt and mud easily wash off.• Standard color is gray.

P/N: TMS070774

• 6” x 6” Extruded Polyethylene Dunnage• Replaces wooden material Wash it off and bring it home.• 50 stick minimum order

Dunnage

Dunnage

Light Kits-Light Kit Case P/N: TMS940212

• Container is rotationally molded of virgin polyethylene. • Standard color is OD Green with yellow zinc plated hardware. • Custom polyethylene insert has two cavities and HDPE strike plate. • Insert provides storage compartment for tripod with halogen or bulbs, light bar, cables and separate com partment for spare light bulbs. • This case has 2" polyethylene f oam lining and six handles.

Light Kits-String Light Kit P/N: TMS020550

Pionjar P/N: TMS984020

• This rotationally molded container comes standard with yellow zinc and a hinged lid. • Standard case color is O.D. Green and inside dimensions are 29"x14"x14". • This design is light and compact and comes with a roll of 1⁄2" polyethylene foam packing material for years of trouble-free repeated use.

• Waterproof • Lifetime warranty • Includes two high quality

waterproof string lights

ScalesP/N: TMS020693

• 1’ Foam Lining• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Scales - Cabling Kit P/N: TMS020692

• Custom Foam Insert• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Tent - Temper/Darnell/Dynell Tent Case P/N: TMS950304

• One Case required for Darnell and Dynell, Two cases for Temper Tent and Poles, add third case for full tent liner• 4 Extra Handles and 4 Lifting Rings Added for Stability• Designed to Fit on the 108” side of 463L Pallet• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

P/N: TMS010841

• Fits 200 and 300 Series Base X• Fits Models 2,3,4 and 6 Drash• Has 8 Handles and Fork TruckProvisions for Ease of Handling

• Rotationally Molded Polyethylene• Available in Gray, OD Green, or DesertTan

Tent Stove Heaters - H-45 Space Heater Case P/N: TMS001330

• Specifically Designed to Hold the Heater, 6Sections of Vent, and the Regulator

• Front Opening Design allows for ground level loading• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Tent Stove Heaters-Tent Stove Heater Case (Yukon)P/N: TMS931025

• Specifically Designed to Hold the Heater, Vent, Drip pan, and Raincap

• Front Opening Design allows for ground level loading• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Tent - Alaskan Shelter CaseP/N: TMS080388

• Has 8 Handles

• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

• Lifting Rings

Tent - Base X / Drash Tent Case

Foam Insert for 720 and 832 Mobilizer TowbarsP/N: TMS010410

• One design holds either 720 or 832 Mobilizer Towbars• Fits Towbars when completely assembled• Custom Foam Insert• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan.

Footlocker - SmallP/N: TMS994976

• Integral Casters and Handle • Lift Out Tray• Rotationally Molded Polyethylene• Available in Gray or OD Green

Footlocker - Large

General Purpose (GP) - Large P/N: TMS941201

• Available with Foam Lining, Custom Foam Insert, or No Foam• Extra Handles and Edge Casters also available for Heavier Loads• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

P/N: TMS994977

• Measures 29x14x12 inside

Integral Casters and Handle • Lift Out Tray• Rotationally Molded Polyethylene• Available in Gray or OD Green

• Measures 29x14x15 inside•

General Purpose Storage and Transport

BenchstockFootlockerGeneral Purpose (GP)MRSP and Drawers

General Purpose (GP)– Medium P/N: TMS011240

• “Nesting Box” Replacement• Available with Foam Lining, Custom Foam Insert, or No Foam• Extra Handles and Edge Casters also available for Heavier Loads• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

GP/

P/Fr

eneral Purpose (GP)– Small N: TMS030276

• Smaller - overall size is very close to current “Nesting Box” • Available with Foam Lining, Custom Foam Insert, or No Foam • Rotationally Molded Polyethylene
• Available in Gray, OD Green, or Desert Tan
N: TMS931117

• Container is O.D. Green rotationally molded virgin polyethylene with a front opening lid and black lusterless hardware. • Interior mounting rails accommodate the optional 7", 8", 9" or 10" deep drawers. • Stacking rib detents on the bottom of the case mate with the raised ribs on the top of the case for solid palletization. • Case also has anti-pilfer tabs to insure integrity of contents. • Exterior dimensions are 32.6 wide x 24.4" deep x 18" tall.

ont Load MRSP, Small

P/N: TMS931115

• Container is O.D. Green rotationally molded virgin polyethylene with a front opening lid and black lusterless hardware. • Interior mounting rails accommodate the optional 7", 8" 9" or 10" deep drawers.• Stacking rib detents on the bottom of the case mate with the raised ribs on top of the case for solid palletization. • Security - Case also has anti-pilfer tabs to accept either leaded wire ties or flat security bands to insure integrity of contents. • Exterior dimensions are 32.6" wide x 24.4" deep x 30" tall.• Advanced composite container is designed with a front opening lid for easy access. • Container has a rugged, one-piece, seamless body and lid with black anodized valence. • Lid has 6 recessed half-turn latches for watertight seal.• Four full spring-loaded handles provide better balance.• Case is airtight and comes with an automatic pressure relief v alve.• Ten containers per tier, stacked five cases tall per 463L pallet.

P/N: TMS931119

• Optional 7", 8", 9", and 10" deep molded polyethylene drawers are lightweight and will not corrode.• Each drawer has a gasketed hinged lid, solid bearing slides rated for 100 lbs and a 12 compartment divider set.• Drawers are a one-piece seamless polyethylene design with ball bearing drawer slides and lightweight cover.• Drawers have divider ribs for locating partitions that can subdivide the drawers into multiple compartments.

SPECIAL FEATURES Anti-Pilfer Tabs Recessed Latches

Front Load MRSP, Large

Front Load-Optional Drawers for MRSP Cases

Large Deployable Book Case with Optional Table P/N: TMS930930

• Each bookcase measures 43"L x 27"W x 21"D and provides over 5 linear feet of shelf space.• The 5-inch deep removable lid converts to a 30" high table by attaching the four legs that are stored inside.• Container is rotationally-molded of virgin Polyethylene. Standard color is Gray. • All hardware is yellow zinc plated steel.

Small Deployable Book Case P/N: TMS971861

• O.D. Green, rotationally molded polyethylene container with spring loaded yellow zinc hardware.• The approximate interior dimensions are 27" x 12" x 12".• This case is foam lined and allows normal size notebooks to be inserted face forward for easy "library-style" access, or face down/up for maximum storage and convenience in transit.

Mobile OfficeBookcaseCameras and ProjectorsField DeskLaptop and NotebookModular Data TerminalPlotter CasesPrinter-Multifunction MachineOther Mobile Office

Trunk LockerP/N TMS080389

• Lift out trays
•• Injection Molded Polyethylene• Available in Gray, OD Green, or Desert Tan
Lifetime Warranty

Canon SD800 Digital Camera CaseP/N: TMS081071

•••• Available in Black

Custom InsertInjection MoldedLifetime Warranty

Sony HDR Digital Camcorder CaseP/N: TMS080386

•••• Available in Black

Custom InsertInjection MoldedLifetime Warranty

Digital Projector Case P/N: TMS060972

• Injection Molded Case• Custom Insert for your

Digital Camera Kit Case P/N: TMS060971

• Injection Molded Case• Custom Insert for your unit.

Digital Video Camera Kit Case P/N: TMS040188

• Injection Molded Case• Custom Insert for your unit.

Marker Board Case-LargeP/N TMSXXXXXX

• Gray Cases in Photo• Holds up to 12 - 1” boards• 1’ Foam Lining• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Mobile Office – Marker Board Case P/N: TMS030270

• Holds 6 – 1” boards• Overall height reduced to 13” • 1’ Foam Lining• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Mobile Office – Shredder P/N: TMS020668

• Custom Foam Insert• Low Liftover Height• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Field Desk P/N: TMS994975

• Standard O.D. Green in color and is made of rotationally molded polyethylene.• Standard latches a black spring-loaded design.• Desk includes a seat, attaching table and six sliding drawers, one of which is lockable, and two of which are designed to hold the hanging desk folders.• This design is slightly larger than the original wooden desks and has a table height of approximately 29 inches.

P/N: TMS080390

•

• Molded Design•

• Lifetime Warranty• Available in

Double Duty Field Desk

OD Green, Gray, or Desert Tan

Rotationally

Six Drawers2 Chairs included

P/N: TMSXXXXXX

• Custom Foam insert for your notebook• Injection Molded Design• Waterproof Construction• Lifetime Warranty• Available in Black, OD Green, or Yellow• Toughbooks Shown • CS48

• CS73

• CS48, P/N: TMS060973

CS73, CS74, P/N: TMS060775

P/N: TMS040895••

CS53, P/N: TMS080461•

P/N: TMS0505074

• Custom Foam insert for your notebook• Injection Molded Design• Waterproof Construction

IBM Thinkpad T Series Laptop

Laptop and Notebook Computers

P/N: TMS021097

• Designed for Gateway E4200, others available• Custom Foam Insert - others available• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

OTHER NOTEBOOK CASES ON REQUEST

P/N: TMS021088• Designed for Viewsonic 19” Flatpanel• Holds 2 Displays in Custom Foam Insert - othersavailable


Notebook and Multifunction Machine Case P/N: TMS011160

• Designed to hold Notebook Computer and• 4 Function Printer/Scanner/Copier/Fax• Custom Foam Insert• Rotationally Molded Polyethylene• Available in Black, Gray, OD Green, or Desert Tan

Flatpanel Monitor Case

Desktop CPU

(optional)

HP Plotter - 24" P/N: TMS040290

• Fits 500/800/Others• Rotationally Molded Polyethylene

• OD or Desert Tan

• Custom Insert for two paper rolls, ink, and cable storage• Girder Beam Table for Plotter Stand

HP Plotter - 42"P/N: TMS030972

• Rotationally Molded Polyethylene

• OD or Desert Tan.

• Custom Insert with paper roll, ink, cable and UPS storage• Girder Beam Table (optional) for Plotter Stand

• Fits 500/800/Others

HP5500 Plotter P/N: TMS040285

• Rotationally Molded Polyethylene

• OD or Desert Tan

• Custom Insert for two paper rolls, ink, stand, paper support

HP4 Printer P/N: TMS021096

• Custom Foam Insert - others available• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

HP1220c Printer P/N: TMS020669

• Custom Foam Insert – others available• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

HP2300 Laser Printer P/N: TMS060974

PS storage
• Injection Molded Case• Custom Insert for paper, ink, cable and U


HP4100 Duplexer P/N: TMS020684




HP4550 Duplexer P/N: TMS020671


HP7110 Multifunction Printer/Fax/Copier/Scanner P/N: TMS040896

• Injection Molded Case• Custom Insert for paper roll, ink, cable and UPS storage

HP7210 Multifunction Printer/Fax/Copier/Scanner P/N: TMS060774

• Injection Molded Case• Custom Insert for Accessories

HP2600 Laser Printer P/N: TMS070270

• Rotationally Molded Case• Available in Gray, OD Green, or Desert Tan

HP

HP

P3700DN Laser Printer with Duplexor/N: TMS070271

• Rotationally Molded Case• Custom Insert

P450/460 Travel Printer /N: TMS050878

• Injection Molded Case• Custom Insert Shown

• Available in Gray, OD Green, or Desert Tan

Xerox Workcenter P/N: TMS020680


OTHER PRINTER CASES ON REQUEST

P

PP

MEP831 Generator CaseP/N: TMSXXXXXX

• Custom built mounting plate for secure transport of generator and accessories. • Low liftover height• Additional handles for load handling • Available in OD Green, or Desert Tan

Power ProductionGenerator Cases

T

Stereo - TV - VCR - DVD CasesTV CaseTV-VCR-DVD

/N: TMS020674

• Custom Foam Insert for Panasonic 27”- others available• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

lasma TV/N TMS041070

• Custom Foam Insert - others available• Rotationally Molded Polyethylene• Available in Gray, OD Green, or DesertTan

V/DVD/VCR Large

Marker Board Case-LargeP/N TMSXXXXXX

• Gray Cases in Photo• Holds up to 12 - 1” boards• 1’ Foam Lining• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Mobile Office – Marker Board Case P/N: TMS030270

• Holds 6 – 1” boards• Overall height reduced to 13” • 1’ Foam Lining• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

M

obile Office – Shredder P/N: TMS020668

• Custom Foam Insert• Low Liftover Height• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

9MM Beretta Pistol Case - 6 Up P/N: TMS001320

• Holds 6 Pistols, Serial Number UP, and 12 Clips• Custom Foam Insert

• Airtight Design with Full Gasketing and Pressure Relief Valve


Berretta/Glock – 24 Pistols P/N: TMS010140

• Holds 24 Pistols • Airtight Design with Full Gasketing and Pressure

Relief Valve• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Berretta/Glock –2 Pistols P/N: TMS01041

• Holds 2 Pistols, Serial Number UP, and 4 Clips• Custom Foam Insert• Airtight Design with Full Gasketing and Pressure Relief Valve• Injection Molded Design• Waterproof Construction• Lifetime Warranty• Available in Black, OD Green, or Yellow

M2 Machine Gun Receiver CaseP/N: TMS031130

• Injection Molded Design • Waterproof Construction

• Lifetime Warranty• Available in Black, OD Green, or Yellow

M2 Machine Gun - Two BarrelsP/N: TMS031131



M2 Machine Gun Receiver & Two BarrelsP/N: TMS031134



M4 Rifle with SOPMOD P/N: TMS020720

• Rotationally Molded Polyethylene• Internal Locking Bar• Available in Gray, OD Green, or Desert Tan

M4 - M9 Rifle Case P/N: TMS050684


P/N: TMS050675


5 Pack M4/M11 Rifle Case

M4/M16 Four Pack Rifle Case P/N: TMS080482

M4/M16 - Eight Pack Rifle Case

P/N: TMS080483

• Rotationally Molded Design • Internal Locking Bar

• Available in Gray, OD Green, or Yellow

• Rotationally Molded Design • Internal Locking Bar

• Available in Gray, OD Green, or Yellow

M16 Rifle Case P/N: TMS050679

M16 - Rifle Case with / without attached M203 Grenade LauncherP/N: TMS050680





P/N: TMS050681

M16 - R ifle Case with / without attached Grenade Launcher M203 & M9 Pistol



M16 Rifle Case - 2 Rifles P/N: TMS033300



M16 Rifle Case - 2 Rifle Case P/N: TMS050682



M16 P/N: TMS050683



- 3 Rifle Case with / without M203 Grenade Launcher

M16 Rifle Case - 12 Rifles P/N: TMS983740


M9 PistolP/N: TMS0506085

P/N: TMS050676





6 Pack M4/M9 Rifle Case

M9 Single Pistol with 2 magazinesP/N: TMS080481



MK 19P/N: TMS050774


M24 Sniper Rifle with Scope CaseP/N: TMS021051

• Rotationally Molded Polyethylene• Internal Locking Bar• Available in Gray or OD Green

M24 Sniper Rifle CaseP/N: TMS050673


M14/M25 Rifle CaseP/N: TMS080485

• Injection Molded Polyethylene

• Available in Black, Green, or Desert Tan

• Waterproof Construction • Lifetime Warranty

M24 Sniper Rifle CaseP/N: TMS050674


M60 Machine Gun with Spare BarrelP/N: TMS031129

• Rotationally Molded Polyethylene• Internal Locking Bar• Available in Gray, OD Green

M240B Machine Gun with Spare BarrelP/N: TMS031122


M249 SAW P/N: TMS031120


M249 Single Machine Gun CaseP/N: TMS050671

• Injection Molded Polyethylene• Internal Locking Bar• Available in Gray, OD Green, or Desert Tan

M249 Single Para Machine Gun CaseP/N: TMS050672

• Injection Molded Polyethylene• Internal Locking Bar• Available in Gray, OD Green, or Desert Tan

Minigun CaseP/N: TMS080484

• Injection Molded Design• Waterproof Construction

Available in Black, OD Green, or Desert Tan• Lifetime Warranty•

Fire Extinguisher - Single P/N: TMS940906

• Red, rotationally molded polyethylene case with yellow zinc hardware.• This case includes a custom foam insert to accommodate one standard size fire extinguisher.• Insert is designed to fit your particular extinguisher.• Custom foam insert holds fire extinguisher securely while in storage or transit.

Fire Extinguisher - Double P/N: TMS940907

• Red, rotationally molded polyethylene case with yellow zinc hardware.• This case is designed to accommodate 2 fire extinguishers.• Case size and insert design is sized to fit your particular application.• Custom foam insert holds fire extinguisher securely while in storage or transit.

Freon Recovery Bottle Case P/N: TMS040178

• Rotationally Molded Polyethylene• OD, Yellow or Desert Tan• Custom Insert for Bottle

SafetyFire ExtinguishersGas Bottle CasesHelmetMedical Gear

Gas Bottles - Acetylene Bottle Case P/N: TMS011165


Gas Bottles - Freon Bottle Case P/N: TMS011185

• Holds either Fr22 or Fr134a bottle• Custom Foam Insert - others available• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Gas Bottles - Oxygen Bottle Case P/N: TMS011170


Gas Bottles - Nitrogen Bottle Case P/N: TMS011175


Medical Gear P/N: TMS030481

• Rotationally Molded Polyethylene• Available in Gray, Orange, Red, OD green, or Desert Tan

P/N: TMS020660

• Holds 5 Full Face Helmets• Custom Foam Insert• Rotationally Molded Polyethylene• Available in Gray, OD Green, or Desert Tan

Helmet Case

• Fits Both Life Support and ATV Full Face Helmets

FATADS - Complete Set

• Set of 4 Cases – sized to stack • Custom Foam Insert • Rotationally Molded Polyethylene • Available in Gray, OD Green, or Desert Tan

FATADS - UCU

• Custom Foam Insert • Rotationally Molded Polyethylene • Available in Gray, OD Green, or Desert Tan

FATADS - UPS


FATADS - Printer


FATADS - Monitor/Keyboard


Assembled Table Leg Kit

Casters Slide

Disassembled Table

Edge Caster

Fork Lift FEA

Lid Hanger

Lid Pouch

Lock Hasp

Carry Lite Case P/N: TMSXXXXXX

FlangemountP/N: TMSXXXXXX

Grab and Roll P/N: TMSXXXXXX

Industrial CasesCarry Lite CasesFlangemountGrab and RollPlasma DisplayProRack

Plasma DisplayP/N: TMSXXXXXX

ProRackP/N: TMS941201

Documents

ABOUT OUR COMPANY - · PDF fileABOUT OUR COMPANY TMS, Inc. is also a ... call us toll-free on your custom requirements or fill out our form. ... MBITR - Multicharger P/N: TMS040271