About Accessories

About the "Roof/Slab/Wall Accessories" Add-On

INTRODUCTION

With the help of this ArchiCAD Add-On you can supplement the roof, slab and wall elements with specialobjects.

HOW TO INSTALL "Accessories" ADD-ON

Start this installer and follow the instructions. The add-on will be automatically loaded the next time you startArchiCAD.

The new set of commands will appear in the "Design/Design Extras/Accessories" submenu by default.

HOW TO USE "Accessories" ADD-ON

First, select an existing building element (wall, roof or slab) on the Floor Plan, and then choose theappropriate command from the Design > Design Extras > Accessories hierarchical menu.

The Choose Accessory Object dialog box prompts you to select an Accessory object. Set the object'sparameters on the Parameters and Custom Settings panels. Other parameters (for example, the slope of aroof) will be set automatically when placing the object, based on the settings of the associated buildingelement. Click OK in the Accessory Object dialog box, then click on the Floor Plan to place the AccessoryObject.

About Accessories http://www.graphisoft.com/ftp/techsupport/downloads/goodies15/ReadM...

1 de 8 04/04/2013 02:33 p.m.

After placing it, you can select it and modify its parameters at any time.

You can also place an Accessory Object without selecting a corresponding building element.Select an Accessory Object from the Choose Accessory Object dialog box and set its parameters. Drawa polyline on the Floor Plan. The selected Accessory Object will be placed with the polyline geometrymethod.

Note: Accessory Objects placed on their own are not associated to any element; that is, they have separateattributes and can be moved and edited on their own.Note: You cannot associate an accessory to an element which is not of its type; for example, a roof accessoryplaced atop a slab will be an independent object.

The Accessories commands update all parameter values of the placed objects appropriately:

When you delete an element, associated Accessory Objects will also be deleted.When you modify an element, all parameter values will be updated on the fly (wall geometry maychange when stretching connecting walls).

To simplify the procedure, you can save variations of the Accessory Objects as Favorites. You can also createcustomized variations by opening an object and saving a copy with a different name, and then modifying thecustom parameters and/or scripts.

ROOF ACCESSORIES


2 de 8 04/04/2013 02:33 p.m.

The Roof Accessories command allows you to place the Roof Surfacer or Wood Ceiling object. Roof Surfacercan model roof sheathing with metal sheets or tiling based on the setting in Roof Surfacer Settings Panel. (TheSheathing Type can also be selected in Parameters Panel.)

Note: The surfacing is done tile by tile, and can add considerable geometric detail (and, consequently,rendering time) to each roof plane. Curved surfaces are more demanding on the computer's resources thanplanar surfaces.

SLAB ACCESSORIES

When choosing the Slab Accessories command, you can choose between two objects.The Footing 1 object can model a concrete footing with stem wall and sill plate.

The Floor Construction object can model layered floors.


3 de 8 04/04/2013 02:33 p.m.

Use the Floor Construction Settings, Section and Model panels to achieve the desired effect.

WALL ACCESSORIES

With the Wall Accessories command, you can place a variety of objects adding details to your walls.

The Moldings and Panelings object model interior details on walls consisting of up to three selectable moldingprofiles, and optional paneling (wainscot and wall panels) between these moldings.

The object's custom parameters can be set in the Choose Wall Accessory Object dialog box, on either theCustom Settings or the Parameters panel. Parameters are grouped according to different criteria on the twopanels.


4 de 8 04/04/2013 02:33 p.m.

The Custom Settings panel has two pages:

one for the General Settings, Geometry and Custom Angles

and one for the Materials and 2D Representation

The Battered Wall object can model battered stone veneers and similar elements applied to a wall, and canhave a different thickness at the bottom and the top. The object can extend beyond or end short of the bottomand the top of the wall by a specified distance.


5 de 8 04/04/2013 02:33 p.m.

The Canted Wall object is an exact replication of the Wall it is derived from, except that it has a parametrictilting angle.


6 de 8 04/04/2013 02:33 p.m.

On the Floor Plan, the Canted Wall symbol shows the outside boundaries of the object, as well as the crosssection at a given elevation (4 ft. by default).

The Wall Framing object can be used to represent stud framing within walls. It handles the properly addedstuds at right angle corners and incoming wall joints. At the windows and doors it adds double studs, cripples


7 de 8 04/04/2013 02:33 p.m.

and jack studs as well as parametric headers. The top header plate is broken or extended to provide overlap atthe joining walls.

The parameter list for 2D Representation includes an on/off checkbox for Show Framing Elevation. Switchingthis parameter On enables you to edit the 3D geometry on the Floor Plan.

Restrictions: Openings for Doors and Windows will have horizontal edges perpendicular to the original wallplane. These objects have their property script set up to provide LUMBER PACK calculation where theindividual pieces are listed with their nominal cross section sizes and their length is rounded up - if necessary -to the next inch. The list also gives an estimate on the overall board feet quantity.

Disclaimer:

The software is provided to you "AS IS" and you acknowledge that it may contain errors. Graphisoftdisclaims any warranty or liability obligations of any kind.

©2011 Graphisoft. All rights reserved.ArchiCAD is a registered trademark of Graphisoft.Other product and company names are trademarks of the respective holders.


8 de 8 04/04/2013 02:33 p.m.

Documents

About Accessories