Ivor Allsop and his family have sought to make everyday tasks easier. Like all of our products, Softride Access Racks developed out of necessity.

Ivor’s brainchild arose with the realization that his five-foot wife, Betty, would never be able to lift her bike atop the family Suburban. Like he had been doing for nearly 25-years, Ivor sought to make this burdensome process easier by creating a hitch mounted bike rack.

In one afternoon Ivor and his two sons, Jim and Mike, sat down and brainstormed what was the first hitch-mounted bike rack. The men quickly went to work patenting their ingenious parallelogram design that allows individuals to lower their rack parallel to the ground. The parallelogram functionality is unsurpassed because it does not “dump” bikes onto the ground when the user lowers the rack. This allows the user to easily access the rear of their vehicle without having to remove their bikes from the rack.

About Access RacksSoftride has long recognized the annoying “clank” that

originates from the receiver when towing. To remedy this aggravating occurrence Softride created a tightening hitch pin that retrofits inside a two-inch hollow ball mount. This clever device forces the receiver to the side effectively eliminating the side-to-side motion that occurs during towing. The QuietRide™ system caught the attention of a leading auto manufacturer who was seeking a “clank” solution and a partnership was created.

The success of the Tightening Hitch Pin, realized in part by the OEM agreement, caused the wheels to turn at Softride, and the QuietRide™ Tightening Ball Mount was born.

Jim Allsop’s brain child turned out to be so much more than just two dimensional tightening; it is the only product in the market that truly eliminates all sway in the receiver. The magic of this patented product occurs when the ball mount is drawn to the side of the receiver. As the ball mount is tightened the “gold wedge” is actuated forcing the ball mount down and effectively creating a secure contact on three sides of the receiver (side, top, and bottom). This ensures that all gaps around the ball mount are absorbed leaving the vehicle and equipment damage free and without the annoying “clank”.

About QuietRide

Softride Racks Other Brands QuietRide™ Tight & Quiet Other Brands Loose & Noisy

innovative   bike racks   towing products

Spring-loaded quick release pull pin handle

Powder-coated steel for strength & corrosion resistance

QuietRide™ tightening anti-rattle hitch bolt secures the rack to the auto

Soft, rubberized cradles gently support bikes

Rugged tie-down straps safely secure bikes

Adjustable width arms accommodate children and adult bikes

Rack arms fold down or remove to stow out of the way

Safety reflectors provide nighttime visibility

Includes QuietRide™ tightening anti-rattle hitch bolt

Anti sway, cable lock and hitch lock sold separately

Key Features

CARRIES

BIKES

Original Parallelogram Design Allows ForEasy Rear Vehicle Access

Easily Adjustable Rack Arms

Universal Hitch

Heavy Duty Straps

Parallelogram Design

Carries up to four 30 lb bikes

Weighs 30 lbs

Part # 26248 Universal Hitch(fits 2” & 1 ¼” receivers)

Rack specifications

Holds two 50 lb bikes Powder-coated steel Anodized aluminum Includes cable lock Tightening hitch bolt and lock Tilts up and down

VERSA BIKE RACK

ITEM # 26249 (Universal Hitch fits 2” and 1 ¼”)

Protects pick up truck tailgates 4 heavy duty tie downs Extra padding where it counts Carries 6+ bikes 61" wide for full-sized trucks 54" wide for mid-sized trucks

SHUTTLE PAD

6 straps secure rack in all 3 planes Holds two 30 lb bikes 4 foam pads contact vehicle Ultra-Strong steel construction

TRUNKSTER

ITEM # 26372

Carries up to 4 snowboards or 5 pairs of skis

Converts bike rack to a ski rack Holds cargo at 45-degree angle Includes lock

SKI RACK ATTACHMENT

ITEM # 24232(Fits Dura, Hydraulic Assist Dura, and Elite Racks)

ITEM # 23970(Fits HD, DX, and Pull Pin Racks)

ITEM # 26461(Small 54”)

ITEM # 26457(Large 61”)

Three-axis tightening Fits 2” receivers Accepts 1” ball shanks 1,000 lb tongue weight 10,000 lb GTW

STEEL TIGHTENINGBALL MOUNT

ITEM # 25733 (2” Drop)ITEM # 25734 (4” Drop)ITEM # 25735 (6” Drop)

Three-axis tightening Fits 2” receivers Accepts 1” and 1¼” ball shanks 1,000 lb tongue weight 10,000 lb GTW

ALUMINUM TIGHTENINGBALL MOUNT

ITEM # 26039 (2” Drop)ITEM # 26040 (4” Drop)ITEM # 26041 (6” Drop)

Two-axis tightening Brass lock with dust cover / keys Stainless steel bolt Fits 2” hollow receivers

TIGHTENING HITCH PIN

ITEM # 25219 (with lock)

ITEM # 25743 (Ball Mount POP Display)

ITEM # 25540 (Bike Rack POP Stand)

POP DISPLAYS Displays Softride product Easy to assemble

ELEMENT BIKE RACK

ITEM # 26248(Universal Hitch fits 2” and 1 ¼”)

Holds four 30 lb bikes Powder-coated steel Tightening hitch bolt Removable / Adjustable arms

Holds four 40 lb bikes Powder-coated steel Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable arms

DURA BIKE RACK

ITEM # 26247 (Universal Hitch fits 2” and 1 ¼”)

HYDRAULIC ASSISTDURA BIKE RACK Holds four 40 lb bikes Powder-coated steel Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable arms

ITEM # 26321 (Universal Hitch fits 2” and 1 ¼”)

Holds three 30 lb bikes Anodized aluminum Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable / Adjustable arms

ALUMINA3

BIKE RACK

ITEM # 26428(Universal Hitch fits 2” and 1 ¼”) NEW

NEW

NEW

Original parallelogram design for easy rear vehicle access

Powder-coated steel for strength & corrosion resistance

QuietRide™ locking & tightening anti-rattle hitch bolt secures the rack to the auto

Spring-loaded quick release pull pin handle

Reinforced steel top plate for added strength

Soft, rubberized cradles and rugged tie-down straps safely secure the bike

Includes cable lock, hitch lock and anti-sway

Accommodates children and adult bikes

Removable rack arms stow out of the way

Safety reflectors provide nighttime visibility

Includes QuietRide™ tightening anti-rattle hitch bolt and lock with dust cover

Ski rack attachment available

Key Features

Rugged Construction & The Ultimate Function

Anti Sway Cradle

Rack Arms Easily Removable

Universal Hitch

Carries up to four 40 lb bikes

Weighs 43 lbs

Part # 26247 Universal Hitch(fits 2” & 1 ¼” receivers)

Rack specifications

EASY ACCESS

CARRIES

BIKES

Hydraulic assisted for easy lifting and provides dampening when lowering

Original parallelogram design for easy rear vehicle access

QuietRide™ locking & tightening anti-rattle hitch bolt secures the rack to the auto

Hydraulic assisted for effortless lifting

Gas spring provides dampening when lowering

Unique disengagement lever for everyday use without bikes

Spring-loaded quick release pull pin handle

Reinforced steel top plate for added strength

Soft, rubberized cradles and rugged tie-down straps safely secure the bike

Includes cable lock, hitch lock and anti-sway

Accommodates children and adult bikes

Removable rack arms stow out of the way

Safety reflectors provide nighttime visibility

Includes QuietRide™ tightening anti-rattle hitch bolt and lock with dust cover

Ski rack attachment available

Key Features

Hydraulic Assisted for Effortless Lifting

Rack Arms Easily Removable

Hydraulic Assist Gas Spring

Carries up to four 40 lb bikes

Weighs 43.5 lbs

Part # 26321 Universal Hitch (fits 2” & 1 ¼” receivers)

Patent Pending

Rack specifications

EASY ACCESS

CARRIES

BIKES

Universal Hitch

Heavy Duty Straps Heavy Duty Straps

EASY ACCESS

Al13aluminum

10 lb base rack install weight

Anodized aluminum rack body with powder coated steel rack arms

Full featured rack at a fraction of the weight

Lightweight and strong materials (Anodized Aluminum and Powder Coated Steel)

Easily lowers while bikes stay loaded

Soft rubberized cradles and rugged tie downs

Cable lock, anti-rattle hitch lock and anti-sway cradles

Removable rack arms reduce installation weight of rack to 10 lbs.

Arms fold down when not in use

Safety reflectors increases nighttime visibility

Universal hitch (includes parts for 2” and 1.25” receivers)

Adjustable width arms accommodate large range of bikes (7” to 9” span)

Key Features

Lightest Rack That Allows Rear Vehicle Access with Bikes Loaded

Carries up to three 30 lb bikes

Weighs 20 lbs

Install Weight 10 lb (plus detachable rack arms)

Part # 26428 Universal Hitch (fits 2” & 1 ¼” receivers)

Rack specifications

Easily Adjustable Rack Arms

Heavy Duty Straps

Fold Down Arms

22CARRIES

BIKES33CARRIES

BIKES

Folds Up When Not In UseCompact When Not In Use

Designed for easy rear vehicle access

Folds up when not in use

QuietRide™ locking & tightening anti-rattle hitch bolt secures the rack to the auto

Most Compact & LightweightReceiver-Mounted 2-Bike Rack Available

Holds up to two 50 lb bikes (on standard Class III 2” receivers)

Weighs 43 lbs

Part # 26249 Universal Hitch (fits 2” & 1 ¼” receivers)

Patent Pending

Rack specifications

EASY ACCESS

Anodized aluminum and powder-coated steel for strength and corrosion resistance

Spring-loaded quick release pull pin lever arm

Includes secure wheel mount cradles with rubber straps

Telescoping tubes adjust side-to-side to accommodate children and adult bikes

Safety reflector for nighttime visibility

Includes cable lock

Includes QuietRide™ tightening anti-rattle hitch bolt and lock with dust cover

Key Features

Universal Hitch

Heavy duty vinyl cover for passenger truck tail gates

Extra padding where it counts

Snug fittings with 4 tie-down straps and a daisy chain for securing bikes to the rail

Easily converts the tail gate of most full sized trucks into a working 6 bike rack

Designed for Mountain Bikes (works with most all bikes)

Access™ flap to reach gate handle while pad is attached

Includes 6 soft wraps for tethering bikes to daisy chain

Least expensive way to carry 6 bikes

Key Features

Tailgate Pad Protects Bikes and TrucksFor Quick Transport

Carries up to 6 bikes

Weighs 4 lbs

2 Sizes: L (61”) S (54”)

Part #26457 (L size: fits most full-size trucks)

Part #26461 (S size: fits most mid-size trucks)

Rack specifications

FAST LOAD / UNLOAD

Carries up to two 30 lb bikes

Weighs 13 lbs

Tool-less install

Designed for vehicles without spoilers

Part #26372

Rack specifications

Snug fit to vehicle with 6 straps

Fits wide range of vehicles

No tools required for assembly and install

Tool-less assembly and installation

Holds 2 bikes securely

Fits minivans, coupes, sedans, wagons, crossovers, and SUVs

4 foam pads create soft points of contact

Fast fit dial for easy installation

Key Features

Elegant and Straight Forward Trunk Mounted 2 Bike Rack

66CARRIES

BIKES22CARRIES

BIKES

45º Angle Minimizes Height

Easy rear vehicle access

45º angle minimizes height for garage access

Securely holds all skis and snowboards

Converts bike rack to a ski rack

Holds skis and snowboards

Holds cargo at 45-degree angle

Fits in most Softride Bike Racks

Versatile & Convenient – no more reaching to the top of vehicle to retrieve equipment

Carrier can be easily lowered with a spring pull pin to allow access to rear of vehicle with fully loaded rack

Sturdy Construction

Includes lock

Key Features

Versatile & Easily ConvertsBike Rack into a Ski/Snowboard Rack

Carries up to 4 snowboards, 5 skis, or a combination of both

Part # 24232 (Fits Dura, Hydraulic Assist Dura, and Elite Racks)

Part # 23970 (Fits HD, DX, and Pull Pin Racks)

Rack specifications

EASY ACCESS

55CARRIES

SKIS44CARRIES

SNOWBOARDS

Patented 3-axis tightening & locking technology

Forged & heat treated solid aluminum construction

Reduces wear & tear on the vehicle's drive train

Use with any 2" vehicle receiver

Wedge and tightening hitch pin combine for safe, quiet towing

Stainless steel hitch pin with lock and dust cover

1-¼” shank hole with sleeve for 1” ball shanks

Class IV

1,000 lb tongue weight

10,000 lb gross towing weight

Patent # 7,004,491

Key FeaturesWorld’s First Solid AluminumTightening Ball Mount

2” Drop & ¾” Rise

Part # 26039

2” Drop Ball Mount

4” Drop & 2-¾” Rise

Part # 26040

4” Drop Ball Mount

6” Drop & 4-¾” Rise

Part # 26041

6” Drop Ball Mount

Patented Wedge TechnologySpacer for 1” Ball Shanks

Patented 3-axis tightening & locking technologies

Rugged powder-coated steel construction

Reduces wear & tear on the vehicle's drive train

Use with any 2" vehicle receiver

Wedge and tightening hitch pin combine for safe, quiet towing

Stainless steel hitch pin with lock and dust cover

1” shank hole for 1” ball shanks

Class IV

1,000 lb tongue weight

10,000 lb gross towing weight

Patent # 7,004,491

Key FeaturesWorld’s FirstTightening Ball Mount

2” Drop & ¾” Rise

Part # 25733

2” Drop Ball Mount

4” Drop & 2-¾” Rise

Part # 25734

4” Drop Ball Mount

6” Drop & 4-¾” Rise

Part # 25735

6” Drop Ball Mount

Patented Wedge TechnologyRugged Powder-Coated Steel

13aluminum

Al

Two axis tightening & locking hitch pin

Reduces wear & tear on the vehicle's drive train

Adapts for use on otherreceiver-mounted products

Patented Tightening Hitch PinStops the Clank

2-AXIS TIGHTENING

SAFELY ELIMINATES

THE “CLANK” Stainless steel hitch pin

Brass lock with rubber dust cover

Use with any 2" hollow ball mount

Eliminates the clanking sound while towing

Key Features

Weighs 1 lb

Part # 25219 (Tightening Hitch Pin with Lock)

Patent # 7,338,065

Tightening Hitch Pin Specifications

Six-pack display

Available individually

NOITPIRCSED # METI YROSSECCA

Dura Rack Arm Set smrA 2 fo teS 07852 #METI

Element Rack Arm Set smrA 2 fo teS 73162 #METI

Cable Lock )aruD( 25442 #METI

)3animulA ,asreV ,tnemelE( 82952 #METI

Anti-sway And Strap Kit 53162 #METI

Hitch Lock And Bolt Set )ylnO srevieceR kcaR ekiB "4/1-1 stiF( 75052 #METI

)ylnO srevieceR kcaR ekiB "2 stiF( 65052 #METI

Replacement Rubber Straps )kcaP-4( 96852 #METI

Locking Bolt For Bike Racks )ylnO srevieceR kcaR ekiB "4/1-1 stiF( 69691 #METI

)ylnO srevieceR kcaR ekiB "2 stiF( 76922 #METI

Replacement Keys

Replacement Nut Holder And Nut For Tightening Hitch Pin ITEM# 25880

Replacement Bike Block Without Strap 20062 #METI

Ball Mount Pop Stand 34752 #METI

Bike Rack Pop Stand 04552 #METI

Universal Lower Kit 64462 #METI (Use to convert size specific Dura,,aruD tsissA .dyH ,3animulA ,tnemelE)"4/1-1 dna "2 lasrevinU ot asreV dna

ITEM # 26033ITEM # 25748

ITEM # 22751

Bolts to any secure vertical wall surface Uses existing rack arms

to neatly store bikes Robotically welded Powder-coated steel

GARAGE STORAGE STATION

Extends the bike rack 4-8”past rear-mounted spare tires

For 2” Dura, Elite, Element,Alumina3, Hyd. Assist Dura, and Versa Bike Racks

Rugged powder-coated steel

EXTENDED HITCH BARGOOSENECK ADAPTER Adds 4” of height for low riding vehicles For use with any 2" vehicle receiver Rugged powder-coated steel

Bridges the gap from stem to seat tube Allows upright rack use with:

kids bikes, lady bikes, and stepthrough frames

For use with any bike rack Min Distance 15" Max Distance 21"

ITEM # 26442ITEM # 26373

BIKE BUMPERTOP TUBE ADAPTER

ITEM # 26260(4 PACK)

ITEM # 26458(50 PACK FISHBOWL)

SOFT VELCRO WRAPS

Accessories

Protects bikes from contact damage against bike rack uprights

Durable and compression resistant For use on all upright Softride Racks Compatible with most brands

of upright racks Includes 2 Soft Velcro Wraps 20” Tall, 3.5” Wide

Velcro straps for securing bikes or cargo Countless uses include:

Ski Tie, Pant Leg Tether, Cable Holder, Cage Holder

Useful with every Softride rack

NEW NEW

NEW

Protects pick up truck tailgates 4 heavy duty tie downs Extra padding where it counts Carries 6+ bikes 61" wide for full-sized trucks 54" wide for mid-sized trucks

SHUTTLE PAD

6 straps secure rack in all 3 planes Holds two 30 lb bikes 4 foam pads contact vehicle Ultra-Strong steel construction

TRUNKSTER

ITEM # 26372

Carries up to 4 snowboards or 5 pairs of skis

Converts bike rack to a ski rack Holds cargo at 45-degree angle Includes lock

SKI RACK ATTACHMENT

ITEM # 24232(Fits Dura, Hydraulic Assist Dura, and Elite Racks)

ITEM # 23970(Fits HD, DX, Hang5, and Pull Pin Racks)

ITEM # 26461(Small 54”)

ITEM # 26457(Large 61”)

HANG2

ITEM # 27041

Carries 5 flat bar bikes (3 road bike) Holds bikes by the handle bar Parallelogram Lowering action Rugged steel construction No frame or fork contact Ships in two boxes 2" hitches only

Holds bikes by the handle bar Parallelogram Lowering action Rugged steel construction No frame or fork contact Carries 2 bikes MTB or Road or both

HANG5

Two-axis tightening Brass lock with dust cover / keys Stainless steel bolt Fits 2” hollow receivers

TIGHTENING HITCH PIN

ITEM # 25219 (with lock)

ELEMENT BIKE RACK

ITEM # 26248(Universal Hitch fits 2” and 1 ¼”)

Holds four 30 lb bikes Powder-coated steel Tightening hitch bolt Removable / Adjustable arms

Holds four 40 lb bikes Powder-coated steel Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable arms

DURA BIKE RACK

ITEM # 26247 (Universal Hitch fits 2” and 1 ¼”)

HYDRAULIC ASSISTDURA BIKE RACK Holds four 40 lb bikes Powder-coated steel Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable arms

ITEM # 26321 (Universal Hitch fits 2” and 1 ¼”)

Holds three 30 lb bikes Powder-coated aluminum Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable / Adjustable arms

ALUMINA3 BIKE RACK

ITEM # 26428(Universal Hitch fits 2” and 1 ¼”)

Softride Rack Products

ITEM # 26496

ACCESSORY ITEM # DESCRIPTION

Dura Rack Arm ITEM# 26557 1 Rack Arm

Element Rack Arm Driver Side ITEM# 26558 1 Driver Side Rack Arm

Element Rack Arm Passenger Side ITEM# 26559 1 Passenger Side Rack Arm

Cable Lock ITEM# 24452 (Dura)

Anti-sway And Strap Kit ITEM# 26135

Hitch Lock And Bolt Set Combo ITEM# 25056 (Fits 1-1/4" and 2” Bike Rack Receivers Only)

Replacement Rubber Straps ITEM# 25869 (4-Pack)

Replacement Hang5 Super Straps ITEM# 26543 (2-Pack)

Locking Bolt For Bike Racks ITEM# 19696 (Fits 1-1/4" Bike Rack Receivers Only)

ITEM# 22967 (Fits 2" Bike Rack Receivers Only)

Replacement Keys

Replacement Nut Holder And Nut For Tightening Hitch Pin ITEM# 25880

Replacement Bike Block Without Strap ITEM# 26549

Bike Rack Pop Stand ITEM# 25540

Common Universal Hitch Kit ITEM# 26446 (Use to convert size specific Dura,Element, Alumina3, Hyd. Assist Dura,and Versa to Universal 2" and 1-1/4")

ITEM # 26033ITEM # 25748

ITEM # 22751

Bolts to any secure vertical wall surface Uses existing rack arms

to neatly store bikes Robotically welded Powder-coated steel

GARAGE STORAGE STATION

Extends the bike rack 4-8”past rear-mounted spare tires

For 2” Dura, Elite, Element,Alumina3, Hyd. Assist Dura, Hang2, and Versa Bike Racks

Rugged powder-coated steel

EXTENDED HITCH BARGOOSENECK ADAPTER Adds 4” of height for low riding vehicles For use with any 2" vehicle receiver Rugged powder-coated steel

Bridges the gap from stem to seat tube Allows upright rack use with:

kids bikes, lady bikes, and stepthrough frames

For use with any bike rack Min Distance 15" Max Distance 21"

ITEM # 26442ITEM # 26373

BIKE BUMPERTOP TUBE ADAPTER

ITEM # 26260(4 Pack)

ITEM # 26458(50 Pack Fishbowl)

SOFT WRAPS (Hook and Loop)

Accessories

Protects bikes from contact damage against bike rack uprights

Durable and compression resistant For use on all upright Softride Racks Compatible with most brands of upright racks Includes 2 Soft Velcro Wraps 20” Tall, 3.5” Wide

Hook and loop straps for securing bikes or cargo

Countless uses include:Ski Tie, Pant Leg Tether, Cable Holder, Cage Holder

Useful with every Softride rack