AARONIATEST & MEASUREMENT

EQUIPMENT

®

WWW.AARONIA.DE

MADE IN GERMANY

Gewerbegebiet Aaronia AG, D-54597 StrickscheidTel.: +49(0)6556-93033 Fax: +49(0)6556-93034www.aaronia.de E-Mail: mail@aaronia.de

SPECTRUM ANALYZERS / 1Hz to 20GHz / Handheld, USB, Remote . . .

SOLUTIONS / Drone Detection System, Shielding Materials, Pre-amps . . .

ANTENNAS / DC to 40GHz / Isotropic, Log-Periodic, Horn, Biconical . . .

SPECTRAN V5 SERIES

REAL-TIME SPECTRUM ANALYZER1Hz-20GHz | 350MHz RTBW

With more than 100 million samples per second the V5 sets itself worlds apart from any comparable re-al-time spectrum analyzer.

The V5 offers a real-time bandwidth up to 350MHz, combined with affordable prices and intuitive hard-ware and software layout.

The real-time streaming function is another special feature of the SPECTRAN V5. Contrary to existing real-time spectrum analyzers, which do not allow uninterrupted data logging, the V5 can stream data continuously and save them gap-free with unlimited length. Recordings of hours, days or even months can be stored and post-processed.

A variety of more advanced software-evaluation and analysis-options are currently under development and these will be available for retrofit when request-ed (e.g. GSM decoder).

Available in 7 different versions (see next page) the V5 offers a solution for almost every RF and micro-wave application.

Aaronia presents the SPECTRAN V5 series, real-time spectrum analyzers designed to capture even the shortest signal transmissions. The SPECTRAN V5 is the culmination of Aaronia’s efforts in building the spectrum analyzer with best price-performance ratio on the market. It scans 20GHz in less than 20 milliseconds, which is an astonishing speed of 1000GHz per second. With this spectrum analyzer you can master all the challenges. Whether it is for spectrum monitoring, RF and microwave measurements or Interference hunting, EMC testing, Wi-Fi and wireless network measurements, RF surveillance and counter-surveil-lance measurements, the SPECTRAN V5 is always the ideal spectrum analyzer for making fast and reli-able measurements.

A weight of just 850g e.g. predestines the V5 Hand-held for measurements in the field yet it can also be used in the lab. The included PC analysis software RTSA Suite transforms each V5 into fully-featured benchtop spectrum analyzers.

aaronia.com/v5-series

THE NEW STATE OF THE ART

FAST, FASTER, V5

SPECTRAN V5 HANDHELD1Hz to 20GHz, Only 850 grams, Incl. PC Software

Real-time USB spectrum analyzer with a very fast sweep mode. It scans 20GHz in less than 20mS, world-record for USB spectrum analyzers. Option-ally upgradeable with an I/Q Generator (6GHz) and a Power Meter (40GHz). Available in 4 different versions, covering 1Hz to 20GHz.

SPECTRAN V5 XUSB Version, Fanless cooling, Unlimited Recording

World‘s first real-time handheld spectrum analyzer! The SPECTRAN V5 Handheld offers up to 175MHz real-time bandwidth, a POI below 1µS, an ultra fast sweep mode and unlimited recording time if used with the includ-ed PC software „RTSA Suite“. Ultimate performance in a small form factor.

SPECTRAN V5 RSA19” Rack mount, 1Hz to 20GHz, Remote Controllable

A rack-mountable 19“ version of the SPECTRAN V5 with an integrated PC and up to 16TB SSD. Includes remote recording and streaming software. The V5 RSA eliminates trips to difficult locations by allowing the transfer of data via TCP/IP.

Ultra robust spectrum analyzer for use under extreme conditions. The V5 XFR PRO offers unrivaled hardware power and is tested to military stan-dards. The very bright touchscreen and 4TB SSD predestine this analyzer for mobile use. It‘s the perfect choice for counter-surveillance measurements.

SPECTRAN V5 XFR PROPowerful Military Standard (IP65) Analyzer, 1Hz to 20GHz

SPECTRAN V5 OEMFor Custom System Integration, Including Powerful API

OEM version of the SPECTRAN V5. Designed for integration into existing systems, the V5 OEM comes with API and offers the smallest available form factor. The low weight and optional internal battery even allows to use the OEM in planes or UAVs.

Aaronia’s high-end RF „Battleship“ with up to 2x internal receivers and 350MHz real-time bandwidth. Most powerful spectrum analyzer version which overcomes any measurement challenge. The Command Center is highly portable and comes with triple UHD-screen and optional 128TB SSD.

SPECTRAN V5 COMMAND CENTERThe Ultimate RF Surveillance Machine with 350 MHz RTBW

SPECTRAN V5 ODBWeatherproof, Remote Controllable, Unlimited Streaming

Outdoor mountable, weatherproof and remotely controllable version of the SPECTRAN V5. The ODB has a passive fan-less cooling and supports a temperature range from -40°C to +60°C. It offers up to 4 RF inputs, 1Hz to 20GHz frequency coverage and remote recording and streaming software.

SPECTRAN V4 / NF / V3 SERIES

SWEEP SPECTRUM ANALYZER 1Hz - 9,4GHz

Based on a completely new patented method of spectrum analysis, the Aaronia SPECTRAN V4 / NF / V3 spectrum analyzers offer RF, EMF and EMC measurements at a spectacular price. The SPEC-TRAN analyzers have an extremely compact design and incredibly high sensitivity (HF-60100 V4 up to -170dBm/1Hz).

The detection of interference sources, the determi-nation of frequency and signal strength as well as the evaluation of even the most complex limits is possible when using Aaronia spectrum analyzers.

All SPECTRAN spectrum analyzers are developed, individually manufactured and calibrated in Germa-ny, guaranteeing highest quality standards.

Aaronia offers a 10 years warranty for all SPECTRAN V4 / NF / V3 spectrum analyzers.

The SPECTRAN was designed for a very wide range of customers where portability, mobility, low weight and dimensions as well as the price are important. This includes areas such as installation of mobile communication, maintenance, service and EMC / field strength measurements for users in labora-tories, universities, military and the industry sector.

aaronia.com/v4-series

AFFORDABLE ANALYZERS

MADE IN GERMANY

Frequency Range 1Hz - 9,4GHz-170dBm/Hz Sensitivity (with Amp)

Low Cost, Prices from 500€ upIncl. PC Software (Win/Mac/Linux)Large Selection of Types & Options

Including Antenna up to 10GHz

SPECTRAN V4 / V3 / NF HANDHELDCompact and Lightweight, Measurements in the Field

The USB versions of the above Handhelds. Controlled via PC, these USB an-alyzers are shipped with PC Software for Windows, MAC OS and Linux. The high-quality aluminum housing offers passive cooling, without fans. Avail-able in 4 versions these analyzers cover a frequency range up to 9,4GHz.

SPECTRAN V4 / NF XPassive Cooling, Simple, Elegant Design

The popular SPECTRAN Handheld spectrum analyzers have become an in-dustry standard - affordable, portable and used by engineers, students, re-searchers, authorities and hobbyists alike. Covering 1Hz to 9,4GHz, with prices between 500,- and 2000,- €, the SPECTRAN is a perfect fit for small budgets.

SPECTRAN V4 / NF RSAFor 19” Racks, 1 Height Unit, Remote Controllable

Full remote control from any location and the continuous streaming of any spectrum of interest are the main advantages of the SPECTRAN RSA series. These 19“ rack-mountable analyzers (1 height unit only) eliminate trips to difficult locations and allow the monitoring of multiple sites.

Ultra robust outdoor spectrum analyzers for use under extreme conditions. The XFR series is tested to military standards and provides a powerful, ex-tremely impact resistant outdoor notebook, as well as a high-end spectrum analyzer, in one compact device. Frequency coverage is 1Hz to 9,4GHz.

SPECTRAN V4 / NF XFRPowerful Rugged Military Standard (IP65) Analyzers

HF-2025 V3Handheld

HF-4040 V3 Handheld

HF-6080 V4 Handheld

NF-1010E Handheld

HF6060-V4 Handheld/RSA

HF-60100 V4 Handheld / X / RSA / XFR

NF-5030 Handheld

NF-3020 Handheld

NF-5030S Handheld / X / RSA / XFR

SELECTION OF AARONIA

ANTENNASDC - 40GHz

Aaronia antennas and probes offer an exceptional mix of performance, functionality and design, for-merly unknown in this price category.

Together with Aaronia antennas, any regular spec-trum analyzer becomes a professional RF or EMC measurement device.

With hundreds of different versions any RF, EMC or microwave challenge up to 40GHz can be mastered.

Exhaustive calibration data is included in the deliv-ery for almost all of the supplied Antennas, which offers the ability to make very accurate EMC mea-surements with any Spectrum Analyzer.

aaronia.com/antennas

FOR EVERY APPLICATION

HyperLOG

BicoLOG

PowerLOG

OmniLOG

IsoLOG 3D

Probe Sets

MDF / MagnoTRACKER Antennas

All Aaronia antennas are developed, individually produced and calibrated at the Aaronia headquarter in Germany. This guarantees highest standards, re-sulting in a full 10 year warranty for all antennas & probes.

MADE IN GERMANY

LOGPER ANTENNAS20MHz to 35GHz, Gain up to 45dBi, Active and Passive

Available as active or passive versions the BicoLOG is the answer whenever a biconical antenna is required. Calibrated from 20MHz to 3GHz it trans-forms every regular spectrum analyzer into an EMC measurement receiver for pre-compliance EMC tests.

BICONICAL ANTENNAS20MHz to 3GHz, Active and Passive, up to 40dBi Gain

The HyperLOGs are Aaronia’s worldwide well-known series of high-quality log-periodic antennas, with extended frequency coverage up to 35GHz. An unbeatable frequency coverage, combined with high directionality and gain are the key factors of the success of these antennas.

3D / ISOTROPIC ANTENNAS9kHz to 40GHz, DF Arrays and Portable EMF Antennas

New and unique is Aaronia’s IsoLOG 3D series. The antenna array IsoLOG 3D covers 9kHz to 40GHz and allows direction finding with ultra high accu-racy. On the other hand the IsoLOG 3D mobile covers 9kHz to 6GHz and is used for 3D EMF measurements. Both are compatible with any analyzer.

Very high input power up to 500W and gain up to 20dBi, these are the key figures of the PowerLOG series. These horn antennas come with specific, detailed calibration data and can be used for pre- and full-compliance EMC tests, radiated emission testing or signal transmitting.

HORN ANTENNAS700MHz to 40GHz, Ultra High Gain, 500W Input Power

NEAR-FIELD PROBESDC - 9GHz, 4x H-field & 1x E-Field Probe, Active & Passive

The Aaronia probe set fits to any spectrum analyzer and allows straight-forward pinpointing and measurement of interference sources from DC to 9GHz. Incl. converter app, calibration data, 40dB pre-amp and 1m cable. Perfect for pre-compliance tests according to e.g. EN55011, CISPR etc.

Aaronia OmniLOG antennas are specially developed as small and compact, yet broadband omni-directional antennas. Despite the small size they cover a large frequency range from 300MHz to 8GHz, with a constant gain. Per-fect for the every-day mobile use.

OMNI-DIRECTIONAL ANTENNAS300MHz to 8GHz, Small and Lightweight

MAGNETIC ANTENNAS1Hz to 400MHz, Extremely Directional with High Gain

Based on a patented production process the new MDF and MagnoTRACK-ER antennas offer stunning performance in the low frequency range down to 1Hz. Built-in amplifiers, extremely high directionality with 1° accuracy and phenomenal gain are the main advantages of these unique antennas.

ISOLOG 3D MOBILE

ISOTROPIC ANTENNA9kHz - 6GHz

Each IsoLOG 3D Mobile includes an internal, re-chargeable battery, offering a run-time of 6 hours, and a switchable low noise bypass preamplifier.

The integrated amp allows measurements of very low-powered signals. Thus, used in bypass mode, the antenna is still usable for high field-strengths.

The control of the antenna is done via USB or via manual antenna selection mode, requiring no USB connection.

Aaronia also integrated an ultra fast adjustable „chopper“ function. Using special, glitch free RF switches this feature offers an automatic endless antenna rotation/selection with a switching duration of up to 50kHz. This feature transforms the IsoLOG 3D Mobile into a fully functional 3D antenna without the need of any USB software control.

Shipped in a waterproof transport-case, accompa-nied with a pistol grip with tripod functionality, the scope of delivery leaves nothing to be desired.

HARDWARE

The new IsoLOG 3D Mobile, Aaronia’s latest devel-opment, is an ultra light and small isotropic antenna which is compatible to any spectrum analyzer. It just works on the fly and is a perfect plug and play solu-tion for 3D measurements in limited time frames.

The antenna requires no software installation, no power connection and no hardware changes. It is connectable via the N (male) connector to any ana-lyzer or oscilloscope.

The IsoLOG 3D Mobile covers a frequency range from 9kHz up to 6GHz.

3D RF TESTING AT ITS BEST

aaronia.com/iso3d-m

HIGHLIGHTSHandheld Isotropic Antenna

9kHz to 6GHz Frequency RangeSuitable for any Spectrum Analyzer

High Gain and Low NoiseBuilt-in Bypass Preamplifier

Manual or Automatic Axis SwitchBattery or DC Powered

Aaronia presents the new, battery-powered sig-nal generators and pre-amplifiers of the BPSG and UBBV series.

The BPSG generators offer precision generated RF signals for the testing of EMC-shielding and EMI/RFI measurements. Available in 4 different versions the generators cover frequency ranges from 23,5MHz up to 6GHz.

The UBBV pre-amplifiers are portable amps which work with any brand of spectrum analyzer, but are also designed to mount directly to our Aaronia SPECTRAN Handheld models for complete integrat-ed operation. Eight different models cover DC to 20GHz and offer up to 40dB gain, available with and without bypass options.

With the very compact dimensions of just 80x50x30 mm and weighing only 150 grams, the UBBV and BPSG series are predestined for mobile use and fit in every pocket. The compact form factor makes them the world’s smallest, battery-powered RF generators and pre-amplifiers up to 20GHz.

HIGH PERFORMANCE...

Many Aaronia antennas can be transformed into active antennas or field strength generators when combined with the UBBV and BPSG in a few simple steps.

In standalone mode the generator can produce sim-ple or very complex batch programs that automat-ically start after power up. This allows for a fixed level frequency or the start of a pre-defined sweep, complex frequency lists, modulation, etc.

All the generators and pre-amps are designed and manufactured in Germany.

...IN A SMALL PACKAGE

VERSIONS

aaronia.com/amps

BPSG AND UBBV

GENERATORS AND PREAMPSDC - 20GHz

BPSG4

BPSG6

UBBV1

UBBV2

UBBV 9010

UBBV DC20

UBBV NF-25

UBBV NF-35

Generator 35MHz-4,4GHz +17dBm

Generator 23,5MHz-6GHz +18dBm

Amplifier 1MHz-1GHz 40dB

Amplifier 1MHz-10GHz 40dB

Amplifier 9kHz-6GHz 22dB

Amplifier DC-20GHz 15dB

Amplifier 1Hz-60MHz 25dB

Amplifier 1Hz-30MHz 35dB

UBBV 1060 BPA Amplifier 100MHz-6GHz 23dB

GAIN /POWER OUT.TYPE RANGE

With their EMC high-tech fleeces, meshes and fab-rics, Aaronia offers some of the world‘s most effi-cient shielding performance of over 110dB, unique in this price category and with such material char-acteristics. These materials are easy to handle - even for novices - offering simultaneous protection against high-frequency (RF) and low-frequency (LF) E-field radiation. The secrets behind this ex-treme efficiency are patented manufacturing pro-cesses coupled with special, high-quality materials. Aaronia shielding materials are easy to handle and to install, can be folded without taking damage, are sturdy, frost- and weatherproof (depending on the material) and can even be installed in concrete. As such, they are also suitable for outdoor use while still being very affordable.

Aaronia materials can be used both for shielding against electric fields from local radiation sourc-es like 50Hz power cables, as well as for shielding rooms or entire houses or other buildings against RF radiation. Installation is performed by attaching the material in adjacent lanes with overlapping seams of approx. 15cm to guarantee a closed surface.

OVER 110dB ATTENUATION

The various shielding systems available on the mar-ket today differ widely in both affordability and pro-tection efficiency.

They are often far too difficult to handle, particularly for the novice, but also for professional users. Apart from this, they are typically far too expensive. Also, customers often need two separate shielding solu-tions simultaneously, as most RF shielding materi-als offer hardly any protection against low-frequen-cy fields, and vice-versa.

RF AND EMC SHIELDING

aaronia.com/shield

AARONIA

SHIELDING MATERIALSDC to 50GHz, 110dB Attenuation

AVAILABLE MATERIALS

A2000+

SHIELD

SHIELD ULTRA

MESH

X-DREAM

X-STEEL

MAGNOSHIELD FLEX

MAGNOSHIELD DUR

CANOPIES

TYPE ATTENUATION

Mesh

Fabric

Fabric

Mesh

Fleece

Heavy Fabric

Metal Foil

Metal Plate

Tent

20dB

50dB

70dB

45dB

110dB

80dB

70%

93%

50dB

HIGHLIGHTSAfter 4 years of development Aaronia introduces its new Drone Detection System. The Aaronia Drone Detector is used to detect the incursion of unwanted drones, based on the directional real-time measure-ment of the electromagnetic emissions of drones. It warns the operator when drones approach the area and automatically sends alerts.

The system has no limitation in detection range, usu-ally the detection range is the same as the usable distance from the operator to the drone (or better) so it always depends on the transmitter power of the drone/operator. Depending on the drone type it could be several km / miles without problems, e.g. a DJI Phantom 3 can be detected from 3km distance approx.

The drone detection system can be used anywhere. Typical scenarios are the protection of residential areas, governmental buildings, prisons and com-mercial / industrial areas like nuclear plants. Avail-able as single-side or multiple-side solution the sys-tem is adjustable to the characteristics of the terrain to be monitored.

THE UAV DETECTION SYSTEM

The drone detector is based on the Aaronia IsoLOG3D antenna, the SPECTRAN real-time spectrum analyzers V5 XFR Pro or RF Command Center and a special software plug-in for the RTSA Suite soft-ware. As a fully integrated system, the Aaronia DDS allows for 24/7 monitoring and recording with gap-less data-streaming (up to 4TB/day). The system saves considerable measurement time and is com-pact and flexible.

It works at night, fog and bad weather with a very high tracking accuracy. Combined with at least 3 systems the DDS allows to triangulate the positions of the drone and / or the operator.

Designed and manufactured in Germany.

HARDWARE

aaronia.com/drone

All-In-One SolutionSmart-Pattern-Recognition24/7 Unlimited RecordingSmart-Alarm-TriggerUltra-High RangeEarly-Warning CapableTailored Solutions on Request

AARONIA

DRONE DETECTION SYSTEMSmart-Pattern-Trigger | 24/7 Unlimited Recording

HIGHLIGHTS

90270

MADE IN GERMANY

Gewerbegebiet Aaronia AG, DE-54597 StrickscheidTel.: +49(0)6556-93033 Fax: +49(0)6556-93034www.aaronia.de E-Mail: mail@aaronia.de

Aaronia AG is a company that designs and manufactures high-end RF & MW equipment based in Germany. Founded in 1999, Aaro-nia uses innovative patents, high-grade ma-terials and production methods, which allow the company to create high-quality products with a fair price.

ABOUT US ®

WWW.AARONIA.DE

Government, Military, Aeronautic, Universities

• NATO, Belgium• Department of Defense, USA• Department of Defense, Australia• Airbus, Germany• Boeing, USA• MIT - Physics Department, USA• NASA, USA• Lockheed Martin, USA• University Strasbourg, France• DLR,Germany• Eurocontrol, Belgium• EADS, Germany• University of Sydney, Australia• FBI, USA• BKA, Germany• Max-Planck Institute for Radio Astronomy, DE• Ministry of Defense, Netherlands

REFERENCESIndustry

• APPLE, USA• IBM, Switzerland• Intel, Germany• Audi, Germany• BMW, Germany• Mercedes, Germany• Microsoft, USA• Volkswagen, Germany• Siemens, Germany• Rohde & Schwarz, Germany• Keysight, China• Philips, Germany• Shell, USA• Sony, Germany• Anritsu, Germany• JDSU, Korea• Hewlett Packard, Germany

VISIT US AT THESE EXHIBITIONS