6
Spark Eliminator Presentation About Air Pollution CK No 2010/064167/23 Tel: +2711 902 5967 Fax: +2711 902 5559 Cell: +2782 495 5179 Email: [email protected] Website: www.aboutairpollution.co.za 174 Radio Rd, Elsieshof, Dinwiddle, Germiston

AAP Spark Arrestor Presentation 2017.01 Rev 01

Embed Size (px)

Citation preview

PowerPoint Presentation

Spark Eliminator Presentation

About Air PollutionCK No 2010/064167/23Tel: +2711 902 5967Fax: +2711 902 5559Cell: +2782 495 5179Email: [email protected]: www.aboutairpollution.co.za174 Radio Rd, Elsieshof, Dinwiddle, Germiston

1

COMPANY OVERVIEWAbout Air Pollution is a completely local South African Company that specializes primarily in the control and removal of air pollutants in the workplace for General Industry .The Managing Member of the Company has more than 3 decades worth of experience in the design, fabrication, delivery and commissioning of dust extraction plants in excess of 120,000m/hour, all over the African ContinentAbout Air Pollution offers the following services :Assessment We have a dedicated sales team, able to asses and advise cost effective custom solutions to your needs.Design - We have accumulated vast experience in designing custom plants to suit our clients needs, for general industry Ranging from the food industry to heavy Furnace Extraction , these are offered in both wet and dry solutions .Fabrication We have an array of qualified and experienced fabricators who fabricate to our strict standards. We also have experienced staff assuring all QAA procedures and standards are adhered to.Installation We have a well established in-house as well as an array of proven Installers with whom we have build long lasting relationships. These installers are not only qualified and dedicated, but also willing to go beyond the norm to offer superior workmanship.Commissioning Our Project Managers, assure that all our jobs are not only completed within the required time frame but also ensures that there are constant communication between all relevant parties during all our projects.After Sales Service We as a company believes and thrives in after sales service to our clients, thus we keep long term records of all our projects and based on predictive maintenance, are able to offer our clients exemplary after sales services.Equipment maintenance and upkeep As mentioned, we offer an exemplary aftersales service, and if required we can combine this with a well priced and timed maintenance and plant upkeep service if required.Ancillary equipment supply In addition to custom designed extraction and pollution control systems, we also offer ancillary equipment, as a direct supply to our customers, ie. Filters (Pleated, Tubular, Envelope etc.), Fans (Axial, Centrifugal, Blowers, etc) Other services - Factory Ventilation - Spray Booths and Ventilation ( Automotive & Industrial ) - Shot Blast Booths and Extraction - Pneumatic Conveying Systems - Vacuum Systems - Welding Station Extraction - Supply of Ducting and Sheet Metal Components including Heavy Steel Manufacture.

Installation of large BAG HOUSE for Zimalco Aluminium ProcessingInstallation of large SCRUBBER with 2 Pre Cyclones for KT Wash, All Stainless Steel

2

About Air Pollution also supplies Filters - Pumps and Fans direct to Industry.About Air Pollution specializes in Industrial Noise Control and Abatement, by means of Attenuation or Specially Designed Enclosures for every need, and will Taylor Make systems to suit your production and workplace .About Air Pollution offers an in house QC program, which will ensure that you the client receive a high quality product during and after manufacture, we welcome you to inspect your product before dispatch .About Air Pollution also offers as built Drawings and Pre-Hazard Studies, which are an in-house norm , and we furnish YOU the client with Operations and Maintenance Manuals.

We offer you Solutions

Contact us today for your requirementsBIG or small.

ABOUT AIR POLLUTION CC - IS A REGISTERED LEVEL 8 BBEE COMPANYCERTIFICATE NO. 0461

CYCLONE Dust Collection system for GWK dealing with maize dust.

3

Spark Arrestors How do they work??:How it works - Through the use of a 'vaned' cone that sits in the inlet reducer, the spark-laden air is forced to the outside of the chamber while the vanes cause a simultaneous swirling action. The outlet duct is inserted into the unit so that it sits directly behind the coneIn considering this, it is important to realize that a spark traveling in a moving air stream is essentially travelingwiththe air at a relative speed ofzero. This is, in fact, less speed than it encounters when "sailing" in ambient air, and is the reason that a spark can carry further once in the duct. The extreme turbulence and the time in which the spark is held in the turbulence accounts for the effectiveness of the unit. While noindustrial spark arrestor or trap, including ours, can guarantee 100% extinguishing, the goal is to provide reduction and limit riskSome other units on the market have relied on swirling the air. In fact those units are also sold as air mixers for mixing gases or hot/cold air in a system so as to cool the air. When used as spark traps, they specifically state that you must place them a certain distance before the collector. This is because they are depending on the swirling action AFTER the unit to complete the extinguishing. HOWEVER, like stated above, the spark is traveling with the air and not necessarily encountering the turbulence (blowing action) that is required to burn the ember/spark out. Our spark arrestor does all the extinguishing in the chamber because we tumble the air, requiring it to reverse on itself.For this reason you can put the trap right on the inlet to the collector. Because of the sizing of the chamber, as long as you stay under ~18 m/sec you should not see more that a .700-800 Pa additional pressure drop. The pressure goes up exponentially after that. Why use About Air Pollution? As a design group and experienced Bag House supplier, About Air Pollution is able to provide spark Arrestors, as part of our proven, standard equipment design, of the highest quality at a competitive price to our clients.. By combining our understanding of dust collection and air dynamics with our in-house design abilities, About Air Pollution retains build and performance quality while simultaneously passing along the price savings to our customers. The result is a spark Arrestor that works and is highly cost effective.

4

Spark Arrestor In operation

DESCRIPTIONThe Cell consists of concentric & overlapping radial curved tabulator vanes in a round housing, which gives the air a full 90deg turn, thereby creating maximum agitation / turbulence of the air stream.

This is a static device, with no moving parts!

It is not an air blending/air mixer falsely applied to spark cooling, as others are sold as. The Spark Eliminator is designed and built specifically for spark arrestance.

TRADE REFFERENCES

KT Wash, R 1, 500, 000. 00 (S/St Scrubber) Lauren Detert, R 85, 000. 00 (Vehicle exhaust) Pat Cornic, R 255,000.00 (Various ducts) Speciality Metals, R 360,000.00 (Tungsten fine dust)Silicon Smelters, R 800,000. 00 (B/house + Duct Upgrade)Suidwes Landbou - Various Projects, R 1,600,000.00 (Maize Dust) Castle Lead works Zambia, R 800,000.00 (Lead Smoke/Dust)Gertech Cape Town, R 56, 000.00 (Installation Work) Ndola Lime Zambia, R 3,200,000.00 ( 3 Bag-houses Crushers )Minerals Vereeniging, R200,000-00 (Various small Filter units)Zimalco Approx., R 4 Million (Aluminium furnace extraction) Sappi Ngodwana, +- R 500,000.00 (Dust extraction Bag-house)Zinchem Eng. Dust Extraction, +- R1, 600,000.00 ( Bag-house Zinc Oxide)Kansai Colorants, +- R 290, 000.00 (Bag-house Pigment dust)Group 5 Pipe Meyerton, +- R 530 000.00 (Shot blast dust Bag-house)Labtech, +- R 302 100.00 (Cartridge Filter- Lab Dust )Frys Metals Lead Refinery furnaces, +- R 9 Million (Large Offline pulsing system)KT Wash - Packing and processing, +- R 6 Million (Multiple Bag-houses -Detergents)

The above is a broad spectrum of small to Mid-large sized projects, successfully completed by ABOUT AIR POLUTION , We trust that this will be sufficient to give you comfort in our abilities and to motivate you to do business with our Company.