Upload
doandien
View
215
Download
3
Embed Size (px)
Citation preview
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Continuous RotationBi-Directional : 0.1 - 0.4Ncm
FRTE
MaterialBody: Polycarbonate Plastic.Gear: Polyacetal Plastic.Fluid: High viscosity silicone passed through an orifice or groove.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Operating Temperature: 0°C to +50°C.
Other Info.Supplied as standard with removable involute spur gear.Module: 0.6 (Matching 250mm plastic racks available - P.O.A.) Pressure Angle: 20° No. of Teeth: 10 P.C.D.: 6mm.Constant damping force in both clockwise and anti-clockwise direction. Damping torque figures at a nominal 20 rpm, 23 °C.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
Model
50 °C403020100
FRTE2 (at 20 Rpm)
Dam
ping
torq
ue N
cm
400300200100
0.5
0.40.3
0.2
0.1
0
400
300
200
100
0.70.60.50.40.30.20.10
Model
50 Rpm403020100
FRTE2 (at 23°C)
Dam
ping
torq
ue N
cm
Damping torque varies with temperature and speed as shown in the performance graphs.
FRTE2100G1FRTE2200G1FRTE2300G1FRTE2400G1
£7.10£7.10£7.10£7.10
0.1 ±0.05
0.2 ±0.07
0.3 ±0.08
0.4 ±0.10
PartNumber
Damping TorqueNcm
Price Each1 - 9
Ø10
2.6
6
14±0.05
Ø2.5±0.05
Ø2.1
2±0.05
2.1
Ø7.2
6(5.5 without gear)
19
3
2.5
1.5
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Continuous RotationBi-Directional : 0.2 - 1Ncm
FRTG
MaterialBody: Polycarbonate Plastic.Gear: Polyacetal Plastic.Fluid: High viscosity silicone passed through an orifice or groove.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Operating Temperature: 0°C to +50°C.
Other Info.Supplied as standard with removable involute spur gear.Module: 0.5 (Matching 250mm plastic racks available - P.O.A.) Pressure Angle: 20° No. of Teeth: 14 P.C.D.: 7mm.Constant damping force in both clockwise and anti-clockwise direction. Damping torque figures at a nominal 20 rpm, 23 °C.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
Model
50 °C 403020100
FRTG2 (at 20 Rpm)
Dam
ping
torq
ue N
cm
450300200
1.41.21.00.80.60.40.20
450300200
2.0
1.5
1.0
0.5
0
Model
50 Rpm403020100
FRTG2 (at 23°C)
Dam
ping
torq
ue N
cm
600
101
600101
Damping torque varies with temperature and speed as shown in the performance graphs.
FRTG2200G1FRTG2300G1FRTG2450G1FRTG2600G1FRTG2101G1
£7.10£7.10£7.10£7.10£7.10
0.20 ±0.07
0.30 ±0.08
0.45 ±0.10
0.60 ±0.12
1.00 ±0.20
PartNumber
Damping TorqueNcm
Price Each1 - 9
Ø15Ø8
2.6
6.6(5.4 without gear)
7
24
3.7
19±0.05
Ø3.6±0.05
Ø2.1
2.5±0.05
2.1 2.5
2.2
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Continuous RotationBi-Directional & Uni-Directional : 2 - 3Ncm
FRTCFRNC
Model
50 °C403020100
FRT/N-C2 (at 20 Rpm)
Dam
ping
torq
ue N
cm
301
201
3.53.02.52.01.51.00.50
301201
543210
Model
50 Rpm403020100
FRT/N-C2 (at 23°C)
Dam
ping
torq
ue N
cm
Damping torque varies with temperature and speed as shown in the performance graphs.
FRTC2201G1FRTC2301G1
FRNC2R201G1FRNC2R301G1
FRNC2L201G1FRNC2L301G1
£16.37£16.37
£19.48£19.48
2 ±0.6
3 ±0.8
Damping TorqueNcm
Bi-directionalDamping
Part Number RH Damping(Clockwise)
LH Damping(Anti-clockwise)
Price Each1 - 9
FRTC FRNC
8
3.21.5
4.5
147
27.5
Ø4-0.05
Ø153.5±0.0521 Ø10.4
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
MaterialBody: Polycarbonate Plastic.Gear: Polyacetal Plastic.Fluid: High viscosity silicone passed through an orifice or groove.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Operating Temperature: 0°C to +50°C.
Other Info.Supplied as standard with removable involute spur gear.Module: 0.8 (Matching 170mm (flexible) and 250mm (rigid) plastic racks available - P.O.A.) Pressure Angle: 20° No. of Teeth: 11 P.C.D.: 8.8mm.Constant damping force in both clockwise and anti-clockwise direction. Damping torque figures at a nominal 20 rpm, 23 °C.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Continuous RotationBi-Directional & Uni-Directional : 5 - 15Ncm
FRTDFRND
Model
50 °C403020100
FRT/N-D2 (at 20 Rpm)
Dam
ping
torq
ue N
cm
152102501
20
1510
5
0
152102
501
2520151050
Model
50 Rpm403020100
FRT/N-D2 (at 23 °C)
Dam
ping
torq
ue N
cm
Damping torque varies with temperature and speed as shown in the performance graphs.
FRTD2501G1FRTD2102G1FRTD2152G1
FRND2R501G1FRND2R102G1FRND2R152G1
FRND2L501G1FRND2L102G1FRND2L152G1
£55.67£55.67£55.67
£63.52£63.52£63.52
5 ±1
10 ±2
15 ±3
Damping TorqueNcm
Bi-directionalDamping
Part Number RH Damping(Clockwise)
LH Damping(Anti-clockwise)
Price Each1 - 9
FRTD FRND
R5Ø4.2 2
5
1119
50
Ø5-0.05
Ø254±0.0540 Ø14.75
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
MaterialBody: Polycarbonate Plastic.Gear: Polyacetal Plastic.Fluid: High viscosity silicone passed through an orifice or groove.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Operating Temperature: 0°C to +50°C. Mass: 0.01Kg
Other Info.Supplied as standard with removable involute spur gear.Module: 1 (Matching 250mm and 500mm plastic racks available - P.O.A.) Pressure Angle: 20° No. of Teeth: 12 P.C.D.: 12mm.Constant damping force in both clockwise and anti-clockwise direction. Damping torque figures at a nominal 20 rpm, 23 °C.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Continuous RotationBi-Directional & Uni-Directional : 50 - 400Ncm
FRTKFRNK
MaterialMaterial: Polycarbonate Plastic with Steel shaft.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Operating Temperature: 0°C to +50°C.Mass: 0.116kg (max.).
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
403500
400
300
200100
050 Rpm403020100
FRT-K2 and -F2 (at 23°C)
Dam
ping
torq
ue N
cm
303203103
500
403
500
400
300
200
1000
50 °C403020100
FRT-K2 and -F2 (at 20 Rpm)
Dam
ping
torq
ue N
cm
303203103500
Damping torque varies with temperature and speed as shown in the performance graphs.
Ø6+0.00–0.03Ø5.2
/ 36/ 47
1.542
1629.55
5±0.05
10Ø13.5
Ø40
R5.5
FRTK2502FRTK2103FRTF2203FRTF2303FRTF2403
FRNK2R502FRNK2R103FRNF2R203
--
FRNK2L502FRNK2L103FRNF2L203
--
£114.24£114.24£114.24£114.24£114.24
£125.76£125.76£125.76
--
50 ±10
100 ±20
200 ±40
300 ±80
400 ±100
Damping TorqueNcm
Bi-directionalDamping
Part Number RH Damping(Clockwise)
LH Damping(Anti-clockwise)
Price Each1 - 9
FRTK FRNK
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
A N T I - V I B R A T I O N
TE
CH
NIC
AL
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
In rotary dampers with continuous rotation, a fluid damping is produced by the shearing of thin silicon layers between the surfaces of a rotor and a stator.The damping moment is determined by the viscosity of the fluid and the dimensioning of the throttle gap.The specified damping moments refer to a speed of 20 rpm and an ambient temperature of 23°C.
In rotary dampers with partial rotation angle, the fluid is forced from one chamber into the other by the movement of a rotor.The damping moment is determined by the viscosity of the fluid and the dimensioning of the throttle gap or throttle orifices.During the relevant return movement, a certain reduced reverse rotation damping moment is created, depending on the size.The damping moments specified in the catalogue always refer to the maximum moment calculated from the application to which the dampers can be stressed.
In adjustable rotary dampers with partial rotation angle, the fluid is forced from one chamber into the other by adjustable orifices.The damping moment is determined by the viscosity of the fluid and the dimensioning of the orifice sizes.During the return movement of unidirectional dampers a small reverse damping moment is created, depending on the size.The damping moments specified in the catalogue always refer to the maximum moment calculated from the application to which the dampers can be stressed.
Our range of rotary dampers are maintenance-free and ready to install.The damping direction of the rotary dampers with continuous rotation can be clockwise, counter clockwise, or in both directions.The outer body is either of metal or plastic.Rotary dampers with continuous rotation ensure the controlled opening and closing of small hoods, compartments and drawers. They can damp directly at the rotation point or linearly by means of a rack and pinion, in order to produce a smooth and even movement.Sensitive components remain unstressed.The harmonious gentle movement process enhances the quality and value of the product.Plastic racks (modules 0.5 to 1.0) are available for the rotary dampers with pinions.Particularly suitable for flaps, closing hoods, CD-player drawers, vehicle glove compartments, the furniture industry, etc.In general, rotary dampers are tested for a service life of 50 000 cycles. Even after this time, the dampers still produce over approx. 80% of their original damping moment. The service life may be significantly higher or lower, depending on the application. Much higher service lives have however been achieved in practice.
Outer Body
Rotor
Cover
Damping Orifice
Damping OrificeDamping Vane
Keyed Output Shaft
Outer BodyPressure Chamber
Damping OrificeRotor
Cover
Outer Body
Continuous Rotation Rotary Dampers
Partial Rotation Angle Rotary Dampers
Partial Rotation Angle Rotary Dampers - Adjustable
Rotary Dampers
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Continuous RotationStandard Type : 0.1 - 3Nm
FFD
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
J
K
ØAØHØB
t
ØG
MaterialMaterial: Polycarbonate Plastic.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Maximum Rotational Speed: 30 rpm.Maximum Cycle Rate: 13 cycles per minute.Operating Temperature: -10°C to +60°C.
Other Info.Recommended Shaft Tolerance: +0.00/-0.03.Type W supplied with bearing on both sides offering higher damping torque.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
TYPE SFFD25SSR102FFD25SSR502FFD25SSR103FFD28SSR102FFD28SSR502FFD28SSR103FFD30SSR102FFD30SSR502FFD30SSR103FFD30SSR153TYPE WFFD25SWR103FFD25SWR153FFD25SWR203FFD28SWR103FFD28SWR153FFD28SWR203FFD30SWR153FFD30SWR203FFD30SWR253FFD30SWR303
FFD25SSL102FFD25SSL502FFD25SSL103FFD28SSL102FFD28SSL502FFD28SSL103FFD30SSL102FFD30SSL502FFD30SSL103FFD30SSL153
FFD25SWL103FFD25SWL153FFD25SWL203FFD28SWL103FFD28SWL153FFD28SWL203FFD30SWL153FFD30SWL203FFD30SWL253FFD30SWL303
£43.30£43.30£43.30£43.50£43.50£43.50£43.84£43.84£43.84£43.84
£44.57£44.57£44.57£44.77£44.77£44.77£46.29£46.29£46.29£46.29
0.10.51.00.10.51.00.10.51.01.5
1.01.52.01.01.52.01.52.02.53.0
25252528282830303030
25252528282830303030
666888
10101010
666888
10101010
21212124242426262626
21212124242426262626
6.26.26.28.28.28.2
10.210.210.210.2
6.26.26.28.28.28.2
10.210.210.210.2
4444444444
4444444444
16161616161616161616
22222222222222222222
4444444444
4444444444
0.010.010.010.010.010.010.020.030.020.02
0.020.020.020.020.030.030.030.030.030.03
Part Number DampingTorque
Nm ØA ØB ØG ØH J KThickness
tMass
KgClockwise
(Right) DampingAnti-clockwise(Left) Damping
Price Each1 - 9
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Continuous RotationFlange Type : 0.1 - 3Nm
FFD
F
DC
AEØB
Ø3.2
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
MaterialMaterial: Polycarbonate Plastic.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Maximum Rotational Speed: 30 rpm.Maximum Cycle Rate: 13 cycles per minute.Operating Temperature: -10°C to +60°C.
Other Info.Recommended Shaft Tolerance: +0.00/-0.03.Type W supplied with bearing on both sides offering higher damping torque.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
TYPE SFFD25FSR102FFD25FSR502FFD25FSR103FFD28FSR102FFD28FSR502FFD28FSR103FFD30FSR102FFD30FSR502FFD30FSR103FFD30FSR153TYPE WFFD25FWR103FFD25FWR153FFD25FWR203FFD28FWR103FFD28FWR153FFD28FWR203FFD30FWR153FFD30FWR203FFD30FWR253FFD30FWR303
FFD25FSL102FFD25FSL502FFD25FSL103FFD28FSL102FFD28FSL502FFD28FSL103FFD30FSL102FFD30FSL502FFD30FSL103FFD30FSL153
FFD25FWL103FFD25FWL153FFD25FWL203FFD28FWL103FFD28FWL153FFD28FWL203FFD30FWL153FFD30FWL203FFD30FWL253FFD30FWL303
£43.50£43.50£43.50£43.50£43.50£43.50£43.75£43.75£43.75£43.75
£44.70£44.70£44.70£44.90£44.90£44.90£46.35£46.35£46.35£46.35
0.10.51.00.10.51.00.10.51.01.5
1.01.52.01.01.52.01.52.02.53.0
25252528282830303030
25252528282830303030
666888
10101010
666888
10101010
13131313131313131313
19191919191919191919
3333333333
3333333333
42424244444446464646
42424244444446464646
34343436363638383838
34343436363638383838
0.020.010.010.010.010.020.020.030.020.02
0.020.020.020.030.030.030.030.030.030.03
Part Number DampingTorque
Nm ØA ØB C D E FMass
KgClockwise
(Right) DampingAnti-clockwise(Left) Damping
Price Each1 - 9
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Continuous Rotation2 - 8.7Nm
FDT
* (at 20rpm, 23°C). Damping in both directions of rotation.
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
R
ØF ØVØE
ØDH
B A
G
/ C-0.02-0.10
-0.0-0.1
/ C
Dam
ping
torq
ue N
m FDT (at 23°C)
Rpm °C
FDT (at 20 Rpm)
Dam
ping
torq
ue N
m
MaterialBody: Steel.Output Shaft Sleeve: Nylon.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Maximum Rotational Speed: 50 rpm.Temperature Range: -10°C to +50°C.Maximum Cycle Rate: 12 cycles per minute.Mass: 0.11kg (max.).
Other Info.There is no support for the output shaft within the damper structure.External support must be provided for the shaft.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
FDT-47FDT-57FDT-63FDT-70
£29.95£33.87£36.72£39.56
2.0±0.3
4.7±0.5
6.7±0.7
8.7±0.8
65798995
56687682
08.010.012.512.5
4.55.56.56.5
47576370
42.852.458.665.4
1.61.61.61.6
10.311.211.311.3
4.55.56.56.5
10131717
0.050.080.100.11
PartNumber
DampingTorque*
Nm A B / C ØD ØE ØF G H R / VMass
KgPrice Each
1 - 9
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Continuous Rotation2 - 10Nm
FDN
R
ØF ØEØC
ØDH
B A
G
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
MaterialBody: Steel.Output Shaft Sleeve: Nylon.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Maximum Rotational Speed: 50 rpm.Maximum Cycle Rate: 12 cycles per minute.Hardness: HRC55. Surface Smoothness: Rz < 1µm.Temperature Range: -10°C to +50°C.Mass: 0.12kg (max.).
Other Info.There is no support for the output shaft within the damper structure. External support must be provided for the shaft.Recommended Shaft Details: FDN-47 Ø6+0.00/-0.03, FDN-57 to FDN-70 Ø10+0.00/-0.03.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
FDN-47-RFDN-57-RFDN-63-RFDN-70-R
FDN-47-LFDN-57-LFDN-63-LFDN-70-L
£50.02£50.02£54.99£54.99
2.0±0.3
5.5±0.3
8.5±0.8
10.0±1.0
65798995
56687682
6101010
4.55.56.56.5
47576370
42.852.458.665.4
1.61.61.61.6
10.314.013.913.0
4.55.56.56.5
0.060.100.120.14
Part Number DampingTorque
Nm A B ØC ØD ØE ØF G H RMass
KgRH Damping(Clockwise)
LH Damping(Anti-clockwise)
Price Each1 - 9
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Partial Rotation Angle 100 - 180Ncm
FYN-P1
FYN-P1-R103FYN-P1-R153FYN-P1-R183
FYN-P1-L103FYN-P1-L153FYN-P1-L183
£15.99£15.99£15.99
100150180
305080
Part Number DampingTorque
Ncm
Return DampingTorque
NcmRH Damping(Clockwise)
LH Damping(Anti-clockwise)
Price Each1 - 9
4
82
20° Rotation 110°
128
1814
22
4
5
Ø12Ø18.5Ø17.5
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
MaterialPolycarbonate plastic.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Temperature Range: -5°C to +50°C.Maximum Rotational Angle: 115°.Mass: 0.01kg.
Other Info.The shaft colour indicates damping direction.Not to be used as a final end stop.External mechanical stops to be fitted at each end of travel.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Partial Rotation Angle100 - 300Ncm
FYN-N1
FYN-N1-R103FYN-N1-R203FYN-N1-R253FYN-N1-R303
FYN-N1-L103FYN-N1-L203FYN-N1-L253FYN-N1-L303
£20.57£20.57£20.57£20.57
100200250300
20404080
Part Number DampingTorque
Ncm
Return DampingTorque
NcmRH Damping(Clockwise)
LH Damping(Anti-clockwise)
Price Each1 - 9
20° Rotation 110°
1.2 28-0.1
12
1622 20
32
Ø20Ø16-0.2 Ø12-0.2
4
28-0.1
White end cap: left-hand dampingBlack end cap: right-hand damping
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
MaterialPolycarbonate plastic.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Temperature Range: -5°C to +50°C.Maximum Rotational Angle: 110°.Mass: 0.01kg.
Other Info.The shaft colour indicates damping direction.Not to be used as a final end stop.External mechanical stops to be fitted at each end of travel.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - Partial Rotation Angle200 - 300Ncm
FYN-U1
FYN-U1-R203FYN-U1-R253FYN-U1-R303
FYN-U1-L203FYN-U1-L253FYN-U1-L303
£25.16£25.16£25.16
200250300
404080
Part Number DampingTorque
Ncm
Return DampingTorque
NcmRH Damping(Clockwise)
LH Damping(Anti-clockwise)
Price Each1 - 9
8
20° Rotation 110°
610
34 185
Ø10Ø13 Ø16
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
MaterialDiecast Zinc.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Temperature Range: -5°C to +50°C.Maximum Rotational Angle: 115°.Weight: 0.04kg.
Other Info.Not to be used as a final end stop.External mechanical stops to be fitted at each end of travel.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
108°
108°left-handdamping
right-handdamping
Endposition
Rotary Dampers - Partial Rotation AngleUni-Directional : 400Ncm
FYN-K1
FYN-K1-R FYN-K1-L £55.72400 100
Part Number
Damping TorqueNcm
Return Damping TorqueNcm
Clockwise (Right) Damping
Anti-clockwise(Left) Damping
Price Each1 - 9
27
R4
10
Ø3.5
1527
6-0.05 4535
3.8
Ø18.2Ø26
26
40 13
105
5
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
MaterialBlack Polycarbonate.
PerformanceTemperature Range: -5°C to +50°C.Mass: 0.035kg.Maximum Rotational Angle: 108°.Maximum Rotational Speed: 50 revs/min and a maximum of 10 cycles/min (12 cycles/min with the FDT/FDN types) the rotary dampers still provide more than 80% of their damping torque after a working life of 50,000 cycles.
Other Info.The FYN-K1 is a vane operated damper giving high damping torque for a specific rotational angle. Not to be used as a final end stop. External mechanical stops to be fitted at each end of travel.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - AdjustableAdjustable : 2 - 10Nm
FYT-H1
FYT-H1 FYT-H1-R FYT-H1-L £137.662 - 10 0.5 50
AdjustableDamping Torque
Nm
Return DampingTorque
Nm
MaximumSide Load
NBi-directional
Damping
Part Number RH Damping(Clockwise)
LH Damping(Anti-clockwise)
Price Each1 - 9
MaxRotation
Angle 105°
5666
11
M5P
Adjusting Screw
18
203015
Ø8
6
Ø45Ø24
6±0.05
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
MaterialBody: Diecast Zinc.Shaft: Steel.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Operating Temperature: -5°C to +50°C.Maximum Rotational Angle: 105°.Mass: 0.24Kg.
Other Info.Keyed output shaft shown in mid-travel position on diagram.A play of 5° can occur at the beginning of the movement.Not to be used as a final end stop. External mechanical stops to be fitted at each end of travel.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components
A N T I - V I B R A T I O N
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
Rotary Dampers - AdjustableAdjustable : 4 - 40Nm
FYT-LA3FYN-LA3
MaxRotation
Angle210°
96
80
706
Ø6.5/ 12.5-0.05
12
3
124878
15
Ø17
Ø50
Ø80
Adjusting Screw
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20%
P
FYT-LA3 FYN-LA3-R FYN-LA3-L £647.884 - 40 4 200
AdjustableDamping Torque
Nm
Return DampingTorque
Nm
MaximumSide Load
NBi-directional
Damping
Part Number RH Damping(Clockwise)
LH Damping(Anti-clockwise)
Price Each1 - 9
MaterialBody: Diecast Zinc.Shaft: Steel.
PerformanceAt a maximum rotational speed of 50 revs/min and a maximum cycle rate of 10/min, the rotary dampers still have more than 80% of their damping torque after 50,000 cycles.Operating Temperature: -5°C to +50°C.Maximum Rotational Angle: 210°.Mass: 1.75kg.
Other Info.Keyed output shaft shown in mid-travel position.A play of 5° can occur at the beginning of the movement.Not to be used as a final end stop. External mechanical stops to be fitted at each end of travel.
FeaturesMaintenance-free and self-contained.Safe motionDesign-orientedEconomical constructionBroad range of applicationHigh energy absorption with small modulesHigher overall quality for controlled motion with uniform, smooth movementSafe opening and closingProtection of delicate components