A5 Complete Price List 21-06-18 Version · Email: [email protected] or andre [email protected] Sales Telephone: 01429 297277 Brimal also supply a complete range of Electronic Components

Email: [email protected] or [email protected] Sales Telephone: 01429 297277

Brimal also supply a complete range of Electronic Components and Tools for

your hobby. Please ring 01429 297277 for all sales.

This List gives you an idea of what else we do.

Audio Cable

Bell Wire & Rubber Cable

Self Tapping Screws range of No 2 & 4

Nuts bolts Washers, M2.5, M3, M4

Grommets

Single Pole Terminals

Jack Plugs and sockets

Vibration Switches

Thermal Switches

Solder Tag Strips

PCB Terminals

Crocodile Clips, Alligator Clips

Pin Headers

DC Plugs & sockets

90’ Pin Headers & sockets

Rubber Feet

Self-Adhesive Feet

Full range of prototype components

See applications and wiring diagrams for most of our products on our

information web site thehobbyshed.co.uk

Realism is what we aspire to achieve

Price List

August 2018

Sales Telephone: 01429 297277

Email: [email protected]

Website: brimal.co.uk

Stay on

the right

track with

our uniquely

designed

components for

your Model Rail layout


BC210 8 way 10 Amp Changeover Contact Relay Board £31.38 8 Relay Module is a simple and convenient way to interface 8 relays for switching

application in your project. Input voltage level supports TTL as well as CMOS.

Easy interface with Microcontrollers based projects and analogue circuits. Ideal

for interface between High Current Robotics and low power microprocessors.

Input supply 12 VDC @ 336 mA Current Rating: Standby 7mA, Full On (all 8

Relays) 126mA. Trigger level 2 ~ 15 VDC (negative rail),

BC214 8 way 2 Amp Changeover Contact Relay Board £31.38 8 12vDC relays each with a single 2Amp Changeover contact output to screw

terminals. All 8 relays have a switched input via a DIL switch and will accept

voltages from 9vDC to 18vDC. Each input requires a 9 to 18v Negative supply to

trigger the relay and has an LED ON indication. The board requires a 12v DC

supply which is further smoothed to reduce interference, there are Positive &

Negative outputs onboard. Board size is 148mm x 60mm

BC218 8 way 2 A Latching C/O Contact Relay Board £37.67 8 Latching Relays with 9 to 15vDC trigger levels. Each relay gives a Latched Single

Pole Changeover Contact. The relay board is powered by 9 to 12vDC from an

external source via wired terminals or a 2.5mm DC plug. Input to Coil 1 of each

relay can be controlled via a DIP slide switch. Both inputs are 9 to 15vDC Negative

rail triggers. Applications include production lines, conveyor systems, material

movement from one point to another, locking ON Indicators, solenoids, or

CP200-1 Single Track Speed Controller £54.96

The CP200-1 is a Single Track Speed Controller with Forward / Reverse switch and

Indication. The Controller comes in a slopped desktop enclosure. The front panel

is capable of accepting a second speed controller, when your layout requires

another. The termination board inside can accept 2 controllers without any

internal changes.

Input 6 – 16vDC . Output Current 5 Amp Peak, 3 Amp Run

CP200-2 Dual Track Speed Controller £79.11

The CP200-2 is a Dual Track Speed Controller with Forward / Reverse switch and

Indication. The Controller comes in a slopped desktop enclosure. The CP200-2

has 2 separate speed controller, so two sections, or two tracks can be run

independently of each other.

2x Input 6 – 16vDC . Output Current 2 x 5 Amp Peak, 2 x 3 Amp Run

CP800 Real Sound Controller £173.44

Scalable from the largest of layouts to smaller single track book shelf type layouts

irrespective of gauge. With up to 15 sound effects available to play on demand,

they can be played either individually or together to to give a richer mix to the

scene. For example, sounds of sea birds combined with those of rain, traffic or

people.

All sound tracks can be initiated by moving the toggle switch down momentarily,

or with the toggle switch in the UP position by using magnetically activated

Sound Cards £25.04

Sound cards for the CP800 are available in

Basic, Steam, Diesel, Underground, DCC Also available is a Bespoke sound Card at £35.00

This card is made from your choice of 15 sounds from our Library of over

60 sounds. Sound list is available Free.

33SWG 0.254mm Hi Temp Wire Ultra Thin

Available in 4m lengths in the following colours.

Red, Black, Green, White, Brown, Blue, Yellow, Violet,

Orange.

4M Length £2.16

Aluminium Self Adhesive Cable Clips

CB420 10mm Self Adhesive Aluminium Cable Clips (250 pack) £18.56

CB420a 10mm Self Adhesive Aluminium Cable Clips (20 pack) £3.24

CB421 6.3mm Self Adhesive Aluminium Cable Clips (250 pack) £13.50

CB421a 6.3mm Self Adhesive Aluminium Cable Clips (20 pack) £2.10

Don’t forget to have a look on our ideas website

thehobbyshed.co.uk

Great for inspiration.

1


1/0.6 Wire 100m Roll 10 Colours CB058 to CB068 £8.44 Easy to solder as there is only one strand. Not as flexible as the 7/0.2

wire but does stay in shape once bent. Brown, Grey, Black, Blue, Green,

Orange, Red, Yellow, White, Purple.

Conductor Make-up:1/0.6mm, Current Rating:1.8A, External Dia:1.2mm.

Primary Insulation: 0.30, Voltage Rating AC:1000V

1/0.6 Wire 10m Spool 7 Colours CB072 to CB078 £2.49 Easy to solder as there is only one strand. Not as flexible as the 7/0.2

wire but does stay in shape once bent. Conductor Make-up:1/0.6mm,

Current Rating:1.8A, External Dia:1.2mm. Primary Insulation: 0.30,

Voltage Rating AC:1000V Black, Blue, Green, Red, Yellow, White, Brown.

7/0.2 Wire 100m Roll 10 Colours CB099 to CB109 £6.63 UK manufactured flexible stranded core connecting wire made up of 7

strands of 0.2mm tinned copper wire to DEF61-12 Part 6 Type 2 and

BS4808 part 2 standard.

Conductor size: 7/0.2 mm, Rating:1.4 A @ 1,000V RMS max

O/D: 1.2 mm nominal, Wall cover: PVC 0.3 mm to DEF61-12 Type 2

7/0.2 Wire 10m Roll 10 Colours CB099 to CB109 £6.63 UK manufactured flexible stranded core connecting wire made up of 7

strands of 0.2mm tinned copper wire to DEF61-12 Part 6 Type 2 and

BS4808 part 2 standard. Conductor size: 7/0.2 mm, Rating:1.4 A @

1,000V RMS max O/D: 1.2 mm nominal, Wall cover: PVC 0.3 mm

Black, Blue, Green, Red, Yellow, White, Brown.

16/0.2 Wire 100m Spool 10 Colours CB120 to CB131 £11.67 A flexible PVC insulated wire used for general internal wiring of

electronic equipment. Conductor: 16 Strands of 0.2mm diameter tinned

annealed copper wire. Nominal Outside Diameter – 1.6mm. Insulation:

PVC to a radial thickness of 0.3mm, Maximum Voltage – 1000V, Rating :

1KV r.m.s., 3.0 amps at 70ºC. 4.0 amps at 25ºC ambient. Sheath – 0.30mm

PVC

24/0.2 Wire 100m Roll 10 Colours CB144 to CB154 £15.84 UK manufactured flexible stranded core connecting wire to DEF61-12

part 6 Type 2 and BS4808 part 2 standard. Ideal for longer runs and or

equipment with higher current draw.

Connecting Wire - Flexible - 24/0.2mm

Size: 0.75mm² Wire Size. Rating: 4.5A @ 1000V RMS max

Multicore Cable 7/0.2mm (also available in 100m rolls) CB599 4 Core Multicore Cable 7/0.2mm ( 1 Metre) £0.77

CB601 6 Core Multicore Cable 7/0.2mm (1 Metre) £1.11

CB611 8 Core Multicore Cable 7/0.2mm (1 Metres) £1.41

CB621 12 Core Multicore Cable 7 /0.2mm (1 Metre) £1.81

CB625 18 Core Multicore Cable 7/0.2mm (1 Metre) £2.49

CP825 Additional Sensor Switch Pack (encapsulated) £4.32 A sensor kit made up of 1 Reed switch, 1 x 6mm Magnet, and 1 Mono Jack plug.

Kit comes complete with full wiring and positioning Instructions.

CP855 Remote Controller of 6 Sounds from the CP800 £28.96 Control up to 6 sound remotely from another area of your layout.

Cable Length 3m. The CP855 allows you to remotely control up to 6 of

the 15 sounds on your CP800 Sound Controller. There are 6 Jack plugs

which can be plugged into any of the 15 outlets on the rear of the unit.

The unit has 6 push buttons numbered 1 to 6, to initiate the sounds

SD300 Extension 12w Speaker with 3.5mm Socket £11.77

Two piece white ABS case with louvered front and recessed panel. The two

halves can be clipped together to provide either a sloping or a standard shaped

box. Fitted with a 12w Mylar weatherproof speaker and a 3.5mm Input jack

Socket.

SD301 3m Extension Cable with 3.5mm Jack plugs £3.96

An audio cable with a 3.5mm stereo jack plug at each end & 3 meters long. Ideal

for connecting the extension speaker above (SD300) to the Control Panel

3v to 12vDC 1 Amp Power Supply Unit

The Power unit is ideal to run the CP800 from an independent supply, or

can be used to run the CN165/6 for LED's when used at the 3v setting.

3V, 4.5V, 5V, 6V, 7.5V, 9V, 12V. Input voltages 220-240VAC

PW120 1 Amp £9.74

PW121 2.5 Amp £16.83

Chassis Type Power Supply Units Chassis type regulated Power Supply with fine adjustment to the output

voltage.The Power Supply has Short Circuit Protection, Overload

Protection, Over Voltage Protection 115% The unit will shut down.

PW104 12v/5Amp £15.51 : PW105 12v/10Amp £19.73

PW108 5v/5Amp £10.73

CN165 Power Dist Board 18 way Terminal Connection £10.69

The CN165 basic unit has 18 Positive and 18 Negative Terminals. The Input

terminal will handle up to 15 Amps, the board can be used for DC voltages up to

48vDC. The LED will show Green if the Polarity is correct, Red if the Polarity is

reversed by mistake or Orange if you are running a Low voltage AC system. Write

on patch for board Voltage and Board No.


CN166 DC Plug Input Power Distribution Board 14 way £11.03 The CN166 basic unit has 14 Positive and Negative Terminals.The input power

can be connected either by wires, a 2.1mm DC plug or a 2.5mm DC plug, the

input terminal will handle up to 15 Amps, the board can be used for DC voltages

up to 24vDC & DCC. The LED will show Green if the Polarity is correct, Red if the

Polarity is reversed by mistake or Orange if you are running a DCC system.

CN168 5 way Fused Power Distribution Board £16.46 The board has 2 types of input, wire connection via a terminal block, or using a

power source with a DC 2.5mm plug. The Input passes through a Fuse and is then

Diode protected from back EMF. The ON LED is Tricolour so will indicate correct

polarity (Green), incorrect polarity (Red), or DCC polarity (Orange). Each output

has a fuse and an 'ON' Indicator.

CN169 6 Way Switchable Distribution Board £17.23 The Input is via a 2.5mm DC socket or screw terminal block and can be any DC

voltage up to 48v or a DCC voltage. There is a Main ON/OFF switch which isolates

both the Positive and Negative Input feeds. The Input then passes through a 5

Amp fuse to feed the outputs and light the 'ON' LED. Each Output has an ON/OFF

switch which isolates both the Positive & Negative lines or in the case of DCC

MR110 Diode Matrix Kit for up to 11 Point Sets £6.55 A Diode matrix kit with stripboard and diodes for up to 11 switches and 11 point

sets. Control up to 11 sets of points from one switch, or a series of points from

one switch is a siding situation. Instead of changing 6 points to get a loco out,

with a diode matrix just one switch will change all 6 points.

Full instructions included, including blank truth table.

MR150 AC to DC Convertor 4 Amp £5.47

This modules can be used to convert AC to DC. The most common AC supply

voltages are 5, 12v, 15v, 16v, 18v and 24v, these modules will handle all these

voltages, and convert them into DC up to a max of 4 Amps. The output voltage

will depend on the input voltage from the transformer. There is typically a

voltage drop of 2 volts through the circuit.

Don’t forget to have a look on our ideas website

thehobbyshed.co.uk

Great for inspiration.

MR170 LED Control Panel Indicator Kit 3mm £4.75 The Kit consists of 10 Red LED's, 10 Green LED's and 20 Panel mounting Bezels.

You will require dropper resistors before connection the LED's to any voltage

above 2vdc - Part No RE137.

Can be used to indicate signals, points, level crossings, and many more.

Black with Silver Cap Control Knob A range of Phenolic Black plastic Control Knobs with white line indicator.

with 6.35 mm (¼in.) shaft hole and grub screw. All knobs have a recess

for the fixing nut so can be fixed close to the control panel.

RK450 19.5mm dia £0.53, RK452 23mm dia £0.61, RK454 26.5mm

dia £0.86, RK456 33.0mm dia £0.86, RK458 45.0mm dia £1.24,

1/4w 5% Resistors in 20 Packs £0.79

RE126 100R RE129 220R RE131 330R

RE133 470R RE137 1K RE141 2K2

RE145 4K7 RE149 10K RE157 47K

RE210 100R 1/2w RE220 1K 1/2w

RE310 10R 3w

Transformers

We do a range of 240v transformers in output 12v, 15v, 24v. at

current ratings of 6VA, 12VA, 50VA, & 100vA.

Also Toroidal Transformers and PCB mounting Transformers.

Transistors ( ) pack size

TR111 BC557 (20) £1.44 TR112 BC547 (20) £2.16

TR113 2N4401G (20) £1.44 TR114 2N3904Z (20) £2.88

TR121 BC107 (10) £3.42 TR122 BC108 (10) £3.42

TR124 BC109 (10) £4.56 TR135 BD679AG (10) £3.24

TR140 BD911 (5) £4.40

HW607 Black Screw No 2 x 13mm (50 Pack) £3.15

No2 self tapping screws ideal for fixing points and signals to the base

board, and many other items. Also very useful for fixing rails to base

board as you have that degree of flexibility you dont have with a pin.

HW608 Black Screw No 2 x 19mm (50 Pack) £3.15

No2 self tapping screws ideal for fixing points and signals to the base

board, and many other items. Also very useful for fixing rails to base

board as you have that degree of flexibility you dont have with a pin.

Pan Head Pozidrive Self Tapping Stainless Steel Screws HW601 No2 x 4.5mm (50) £2.00 HW606 No2 x 25mm (50) £3.00

HW602 No2x 5.5mm (50) £0.90 HW613 No4 x 13mm (50) £3.00

HW603 No2 x9.5mm (50) £1.78 HW614 No2 x 19mm (50) £3.00

HW604 No2 x 13mm (50) £0.93 HW615 No2 x 25mm (50) £3.00

HW605 No2 x 19mm (50) £2.00

2 13


5mm Pitch 2 & 3 way Pluggable Rising Clamp Terminals Terminal Block 2-Way 12A 5.08mm & 3-Way 12A 5.08mm are plug-in

female terminal blocks that fit certain DCC controllers.

CN710 2 Way £0.76

CN711 3 Way £1.58

SL312 Solderless Locking LED Holder 2.54mm £0.78

A Locking LED holder with 200mm leads pre-stripped and tinned,

LED is inserted into the holder and is retained in position by a

clamping device. Suitable for 5mm or 3mm LED's with 2.54mm

lead spacing.

DIN Plugs & Sockets Plugs: CN502 5 Pin 180’ £0.66 Sockets: CN533 5 Pin 180’ £0.78

CN5022 5 Pin 240’ £0.66 CN5333 5 Pin 240’ £0.78

CN503 6 Pin £0.66 CN534 6 Pin £0.81

CN504 7 Pin £0.75 CN535 7 Pin £0.90

CN505 8 Pin £0.81 CN536 8 Pin £0.90

CT101a Quick Splice Connector 22-16AWG Red £1.80

(25 Pack) Self-stripping tap splice connector. Ideal for Bus Bar linkage. The tap

splice is placed over existing wire, the additional wire inserted, and the

connector then crimped with pliers. 0.8 to 2mm² wire size. 3.68mm

internal diameter. 22 to 18 AWG

CT102a Quick Splice Connector 16-14AWG Blue £1.80

(25 Pack) Self-stripping tap splice connector. Ideal for Bus Bar linkage. The tap

splice is placed over existing wire, the additional wire inserted and the

connector then crimped with pliers. 1 to 1.5mm² wire size. 3.68mm

internal diameter. 16 to 14 AWG

CT300 Push on Crimp / Solder 2.8 x 0.5mm Terminal £3.24

(50 Pack) Crimp / Solder terminal ideal for our range of mini toggle switches

SW300 to SW374. Fits Tab Width 2.8mm

Contact Material: Brass. Contact Plating: Tin

Wire Area Size Max: 1mm²

Stripboard Featuring (2.54mm pitch) and manufactured with copper clad paper and

phenolic laminate body material.

PR401 9 tracks (25 x 64) £0.56 PR403 24 Tracks (95 x 64) £1.47

PR405 19 Tracks (90 x 50) £2.44 PR409 41 Tracks (160x100) £2.16

PR410 41 Tracks (250x 100) £3.40

MR175 LED Control Panel Indicator Kit (Tower Led’s) £6.89 The Kit consists of 10 Green &10 Red 2mm Tower LED's & 10 dropper resistors to

connect the LED's to any voltage above 2vdc - Part No RE137.

Can be used to indicate signals, points, level crossings, train positions, and many

more.

MR201 Additional Speed Control Kit for CP200-1 £30.10 The kit is complete with Speed Control circuit, Forward / Reverse switch and

indication circuit. All fixing spacers and nuts. Both units have been wired together

and have 4 wires coming off the unit. Two go to the Power input terminals, and

two go to the Track 2 terminals.

All wires are colour coded with full instructions on how to fit and connect the

unit.

MR202 Control Panel Indicator Kit 5mm LED’s £4.56 The Kit consists of 10 Red LED's, 10 Green LED's, 10 Resistors 1K, and 20 Panel

mounting Bezels. The Bezel requires a 6.35mm hole in the control panel, and the

LED is pushed into the bezel from the underside thereby locking the LED and

Bezel in place on the panel. Can be used to indicate signals, points, level

crossings, train positions, and many more.

MR203 Train or Points Indicator Kit £6.48 This Kit is designed to Indicate the state of a set of Points or the Position of a

Train on the track. The position of the Sensor and the magnet is shown in the

drawing. Set it up with the points set at straight through and the sensor about 10

to 15mm from the lever. Glue the magnet to the moving lever of the points.

When the points are changed the magnet should move to within 10 to 5mm of

the Reed, this will then change the state of the switch.

MR204 Momentary Switch Memory Circuit Latching 9-16v £5.50 The MR204 is a latching relay circuit which has 2 coils for energising the contacts,

or rather one coil to energise them and one coil to de-energise them. This means

that a momentary pulse on Coil 2 changes the state of the contacts, and they

remain in that state (even if power is completely removed) until Coil 1 receives a

momentary pulse. It also has 2 sets of 'changeover contacts' which mean you

can switch 2 separate circuits at the same time, with a rating of 2 amp

MR208 Infrared Switch with adjustable ON time

Coming Soon

MR210 Capacitor Discharge Unit (CDU) Standard £9.52 A solenoid requires a short sharp punch of current to switch them. These high

currents can damage switches and indeed cause points motors to overheat and

burn out. A Capacitor discharge unit gets over this problem by supplying this high

current as a high energy pulse to the points motor solenoid which in turn

operates the points. The electrical charge is released, on throwing a switch, as a

pulse.


MR214 Automatic Forward / Reverse Shuttle Switch £12.58 In this application the MR204 is used as a Automatic Forward / Reverse (Shuttle)

Control. Sensor 1 and Sensor 2 could be placed anywhere on a loop, or even back

to back. The train will run from Sensor 2 to Sensor 1, when it passes sensor 1 the

circuit will change the polarity of the tracks putting the train in reverse. The train

will now travel in reverse until it passes over sensor 2, at which time the MR204

will again change the polarity of the track putting the Train into forward again.

This will continue until power is removed from the system.

MR221 Mini 12v Relay Board 2 No Changeover 3 Amps £5.49 The MR221 is a miniature relay board with terminals for the Input & Output. The

relay is a dual changeover. The relay contacts are rated at 3 Amps. Ideal for

switching equipment of a different voltage to the circuit voltage.

Voltage Switch On range 9.0 to 18.0 vDC, Coil Resistance (Ohms)450 x (1+/-

10%)

Contact Resistance (Ohms) 50 max at 0.1v, Contact Material AgNi + Au

plated

MR222 Mini 24v Relay Board 2 No Changeover 3 Amps £5.49 The MR222 is a miniature relay board with terminals for the Input & Output. The

relay is a dual changeover. The relay contacts are rated at 3 Amps. Ideal for

switching equipment of a different voltage to the circuit voltage.

Voltage Switch On range 18.0 to 35.0 vDC, Coil Resistance (Ohms)1600 x (1+/-

10%)

Contact Resistance (Ohms) 50 max at 0.1v, Contact Material AgNi + Au

plated

MR230 6 x 3way Screw Terminal Junction Board £5.37 As you are aware all proprietary manufactures supply their products with short

lengths of wire which are then connected to your cables. This is an 18 way

terminal block which can be broken down into multiples of 3. Each 3 way

section has 3 IN screw terminals, and 3 OUT terminals. They can be used as a

bank of 18 ways or snapped off so you have a 3 way terminal for point motors or

signals, and so on.

MR235 1 x 3way Screw Terminal Junction Block £0.86 The 3 way section has 3 IN screw terminals, and 3 OUT terminals. The terminals

and the board are rated at 10 Amps

MR253 Auto Forward/Reverse with End Stop Timer £35.84

This Automatic Forward / Reverse unit will work on a Straight track, U track, or

Loop track. The Train is fitted with a magnet between the front wheels, and there

are 2 sensors fitted to the track in positions A and B. The train will travel from

Sensor A forward to Sensor B, here it will stop for a time set by the Timer, at the

end of the time period the polarity of the track will be changed, and the train will

Reverse back to Sensor A. The process will repeat itself until power is removed.

MR313 Mini Toggle Switch for 3 Aspect Signals £6.57

A special Switch that has 3 On positions - ideal for 3 Aspect signals or switching

On 3 items separately. Comes complete with full wiring Instructions for all types

of 3 Aspect Signals. Stainless steel housing with silver plated copper-alloy

contacts, Switch Function Type: DPDT On-On-On,

SL700 Infra Red Sensor Unit. £0.96

This reflective sensor contains an infrared emitter and

phototransistor in a leaded plastic package designed to exclude

visible light. The specification and feature set of this optical

sensor makes it ideal for line tracking and object sensing.

CN171/2 Terminal Block 3 or 5 Amp 12 Way Clear Standard 12-Way 3 Amp or 5 Amp terminal blocks with brass screw

terminal assemblies and PVC insulation. Easily sub-divided into smaller

strips. Suitable for mains voltages.

CN171 3 Amp £0.43

CN172 5 Amp £0.48

CN179/80 12 Way 6 or 8 Amp Pluggable Terminal Strip Pluggable industrial quality terminal strips moulded in PLP with

flammability rating of UL94V-2. Matching male and female supplied in

12 way lengths. Can be cut to size

CN179 6 Amp £4.53

CN180 8 Amp £4.71

CB876 Marker ties 100x2.5mm white(100 Pack) £3.00 Self Locking Marker Tie, 18mm Bundle Diameter, Natural Colour, 8kg

Tensile Strength, Nylon 6.6 Material, 100mm Length, 2.5mm Width,

Markings can be Made Using any Indelible Marker, Flame Retardant to

UL94V2, Provides Quick and Effective Method of Securing and Marking

Bundles of Cables

Cable Ties in 100 Packs The flexible white nylon material allows these self-locking cable ties to

remain serviceable through temperature ranges of –40°C to +85°C.

CB869 white 80x2.4mm £0.76 CB870 black 100x2.5mm £0.54

CB871 white 100x2.5mm £0.54

Self-adhesive Cable Tie Mounts in 20 Packs Self-adhesive bases to accept cable ties. Ties can be inserted from all

four sides. Designed for holding heavier cable bundles, these offer a

very secure fixing and can be used with cable ties up to 5.2mm width.

CB890a white (20 Pack) £1.26

CB891a black (20 Pack) £1.26

Cable 'P' Nylon Clips in 25 Packs P-Clip, for various cable sizes, Screw Fixing Mounting, Nylon Material,

Natural Colour, 4.6mm Fixing Hole Diameter, Designed to Hold Cable

Bundles or Pipes/Tubes, Radiused Interior Edges to Protect Cable

CT404a 4mm diameter £1.29

CT408a 10mm Diameter £2.26


Tri Colour LED’s Tri-colour 5 mm or 3mm LED in water clear package. Red and green

diodes are connected in a common cathode and both diodes connected

together produce a third colour Yellow.

SL111 5mm £0.22

SL255 3mm £0.21

5mm LED’s A 5mm solid state LED. Reliable and rugged, long.

SL100 Green £0.12 SL101 Red £0.12

SL102 Yellow £0.12 SL103 Blue £0.17

SL104 White £0.17

SL115 White Super Bright 40000mcd £0.36

3mm LED’s

A 3mm solid state LED. Reliable and rugged, long.

SL250 Red £0.09 SL251 Green £0.08

SL252 Orange £0.09 SL253 Blue £0.07

SL254 Yellow £0.09

SL256 White Super Bright 20000mcd £0.37

Tower Led’s A 12V red 2mm tower LED from that is a TTL compatible solid state lamp

with an integral current limiting resistor.

SL260 Red £0.23 SL263 Blue £0.32

SL261 Green £0.25 SL264 White £0.36

SL262 Yellow £0.25

LES E5 Bulb 12v A miniature (LES)E5 bulb. Used in many.This small bulb has an

average life of 5,000 hours! Dimensions 5.1mm x 16mm.

Clear 12v LB111 £0.41

Red 12v LB114 £0.48

Green 12v LB113 £0.48

Grain of Wheat 3mm x 7mm Bulbs Sub miniature "grain of wheat" 3mm x7mm lamps with insulated wire

leads 120 mm long. Available in 12v

LB151 Clear £0.42 LB154 Green £0.42

LB152 Red £0.42 LB155 Amber £0.42

LB153 Blue £0.42 LB156 Yellow £0.42

LB120 E5 Screw Warm White Light LED 12vDC £1.47

A miniature Lilliput Edison Screw (LES)E5 LED. Used in many

applications such as panel lighting. This small LED has an average

life of 50,000 hours! Dimensions 5.1mm x 16mm.

Ideal for Model building lighting, adjust the voltage will adjust

the brightness

MR318 Points Motor (Stall Type) £7.00 A Point Motor Switch with STRAIGHT or TURN OUT Indications all on a small

Printed Circuit Board with terminals for your incoming and outgoing wires The

MR318 Is a triple Pole Double Throw mini toggle switch. 2 of the poles are used

to reverse the polarity of the incoming power so that when the switch is moved

down the output polarity is reversed. Instead of complicated wiring on the back

of the switch the PCB does all this for you.

MR319 Points Motor Direction Switch £9.16 As the points only require a short pulse to energise them, there is no way to

indicate the position of the points after they have changed, until now. This

momentary switch has a built in relay and bi-colour LED. It therefore only

requires 3 wires to the set of points, and does not require any wires back from

the points to indicate the status of the points. This circuit will also indicate the

correct status of the points the next time you power up your layout.

MR320 On - Off Switch with Indicator £8.37 A On-Off or On-On mini toggle switch with status indication. There are 4

terminals on the underside of the board, 2 are power incoming and 2 go to the

equipment you wish to control. The indicator will always show the current

position of the equipment, and will remember this even if power is switched OFF

at the end of a day. ideal for Track Isolation, Red/Green Signals, and any

equipment that requires an ON-OFF switch, such as Station Stop Timer

MR330 Automatic Slow Start & Stop

Coming Soon

MR331 Track Occupied Detector

Coming Soon

MR350 One Shot Timer £9.93 This is a one shot, also known as a ‘monostable timer’. When the timer is

triggered by SW2 it will remain ON for a predetermined period set by the preset

VR1. The preset varies the time ON from approx 1 sec to 120 seconds. The ON

time can be Reset to OFF by SW1.

MR351 U Assemble One Shot Timer £5.37 This Kit is a self-assembly version of the above timer MR350.

Ideal if you fancy assembling the printed circuit board yourself

12


MR352 Station Stop Timer Variable 1 sec to 4 minutes £12.42 This uses the MR350 and a sensor to create a Station Stop Timer to your layout.

This will allow you to run your train on a continuous loop with it stopping each

time it gets to a station. The basic principle is to have a section of track inside the

station isolated from the power, and switched ON and OFF by an electronic

timer. Stop time can be set from 1 second to 120 seconds.

MR355 Pulse timer with ON variable 0.5sec to 60 sec £6.35 A Pre-assembled adjustable Pulse Timer with dual changeover relay output. Ideal

for intermittent operation of equipment. The Relay has dual 5 Amp changeover

contacts. Working voltage is 9v to 18v DC. Pulse time is adjustable from 0.5

seconds to 60 seconds, Pause time is adjustable from 0.5 seconds to 60 seconds.

Possible applications include Blinking lights, single frame photo shooting,

lighthouse beacon, rail crossing lights or sounder, pedestrian crossing lights

MR356 U Assemble Pulse timer MR355 £5.01 This a kit version of the MR356 for you to assemble, Full assembly Instructions

and also usage ideas.

MR357 Light House Beacon Flasher £8.71

Using the MR355 and adding to it an Ultra Bright 3mm LED and a mini toggle

switch it can be used as a Light House Beacon or any other flashing unit with both

the ON time and the OFF time variable.

MR420 Universal Road Traffic Light System

Coming Soon

MR601 Reverse Polarity switch with Offset Indicators £6.77

The MR601 is a Power Reversing Circuit - It switches the Positive to Negative and

the Negative to Positive with a Centre OFF position. It is ideal for reversing the

polarity of the tracks to put the Locomotive in Reverse. The circuit also has two

LED's one Green for forward & one Red for Reverse, both are off when the switch

is in the centre position. This is the switch assembly we use in our Speed

MR601-1 Reverse Polarity switch with Inline Indicators £6.77

The MR601 is a Power Reversing Circuit - It switches the Positive to Negative and

the Negative to Positive with a Centre OFF position. It is ideal for reversing the

polarity of the tracks to put the Locomotive in Reverse. The circuit also has two

LED's one Green for forward & one Red for Reverse, both are off when the switch

is in the centre position. This is the switch assembly we use in our Speed

Project Boxes 73L x 56w x 25h

EN350 Black, EN351 White, EN352 Grey £2.31

111L x 57w x x22h

EN453 Black, EN454 White, EN455 Grey £1.98

Flanged Project Box Ideally suited for fixing under

baseboards or other surfaces (Integral card guides accept 1.5 mm

(0.062") P.C. cards). Lid contains four moulded PC board standoffs. Lap

joints provides protection against access of dust and splashing water. EN152 100x50x21, £3.78 EN153 120x65x36, £5.76

EN154 150x80x46 £6.73

Small ABS Box with Lid Black 134x89x45mm £3.76

Multi-purpose enclosure. Incorporates 4 internal screw fixing points for

PCBs. Lid held by 4 countersunk screws. All hardware included.

Internal Dimensions: 128 x 84 x 41mm

Hammond Hand Held Enclosure £6.19

Ergonomically designed enclosures for hand-held comfort. ABS plastic,

moulded with a soft grey or black edge grip. Top cover is recessed for

membrane, display or keypad. PCB stand-offs moulded into the case.

117h x 79w x 24h

EN240 Red, EN241 Yellow, EN242 Grey

DD102 Standard 1 Amp 100v Diode (20 Pack) £1.72 Standard recovery 1N4000 series 1A rectifier diodes in industry standard

DO-41 package. Low forward voltage drop. Low reverse leakage current

Ideal for blocking voltages in track routing or AC to DC rectifiers.

DD120 General Switching Diode 1N4148 (20 Pack) £1.50 General purpose low signal switching diodes in a range of operating

voltages. Reverse Voltage Vr Max:75V. Forward Current If(AV):150mA

Will work on all voltages on the Layout up to a max of 150mA for signal

blocking.

A Range of Rectifiers Full spec for each rectifier can be found on the web site. All ex stock.

DD340 1.5 Amp, Peak Voltage 200v (bottom in image) £0.18

DD351 4 Amp , Peak Voltage 200v (right in image) £0.54

DD361 8 Amp , Peak Voltage 200v (right in image) £0.86

DD370 25 Amp , Peak Voltage 200v (left in image) £1.03

9


Miniature Toggle Switches Single Pole We have over 60 different types of Mini Toggle switches from single

pole to 6 pole. Momentary is shown ( )

SW301 (ON)-OFF-(ON) £1.29 SW302 ON-OFF-(ON) £1.36

SW303 ON-OFF-ON £0.99 SW305 ON-OFF £0.93

SW310 Double Pole (ON)-OFF-(ON) £1.38

Miniature Toggle Switches SW312 Double Pole ON-OFF-ON £1.27

SW315 Double Pole ON-ON/ON-OFF £1.05

SW318 3pole ON-ON £2.25 SW319 3pole ON-OFF-ON £2.57

SW320 4pole ON-ON £3.00

SW321 4pole ON-OFF-ON £3.21 AND MANY MORE

PCB Keyboard Switch £0.52

Particularly suitable for digital applications, each contact utilizes two

terminal pins for ease of PCB track layout, and to enable X,Y coding.

Contact rating: 10mA at 30Vdc/100Vac, Travel 0.8mm

SW650 Red, SW651 Black, SW652 Green, SW653 Blue

SW654 Yellow, SW655 White.

Key Operated Switch Contact rating: 5A 115VAC/3A 50VDC

SW810 SPDT Key removable in OFF position only. £6.37

SW811 DPDT Key removable in OFF position only. £7.02

SW813 SPDT Key removable in both positions. £6.37

SW814 DPDT Key removable in both positions. £7.02

Reed Sensors & Magnets. We have a range of over 30 sensors & magnets, here is just a few

SW923 Reed Switch 200v 20w £0.69

SW927 SPNO Encapsulated Reed Switch 24VAC £1.42

SW928 Miniature Reed Switch SPCO 3VA £2.08

SW932 Neodynium Magnet 6mm x 2mm £0.36

KD200 Tower Pro SG90 Mini Servo £4.61 The Tower Pro SG90 Mini Servo is a low-cost, well specified servo ideal

for use in Model Railways for Points & signals radio-controlled models

and for interfacing with microcontroller systems like Arduino, Raspberry

Pi, PICAXE, etc.

Electronic Desktop Sloped Enclosure Sloped Front Instrument housings moulded from black ABS with integral

grey aluminium sloped panels, PCB guides and 4 adhesive feet. Ideal for

desktop instrumentation or controls

EN230 161 x 96 x 57mm £7.30

EN231 215 x 130 x 72mm £14.30

MK100 Stainless Steel Hexagonal Spacer Mounting Kit 10mm £1.39

A kit of 6 Stainless Steel Hexagonal 10mm long Spacers and

12 Stainless Steel M3 x 5mm Screws.

MK110 Stainless Steel Hex Spacer M/F Mtg Kit 10mm £1.68

A kit of 6 Stainless Steel Hexagonal 10mm long Male/Female

Spacers and 6 Stainless Steel M3 x 5mm Screws, and 6 Stainless

Steel M3 Nuts.

MK120 Cylindrical Spacer & ST Screw 10mm x 6 £1.10

A kit of 6 Stainless Steel 19mm Self Tapping Screws and 6 Nylon

10mm spacers

MK130 Self-adhesive Stand Off's 9mm x 6 £1.62

A kit consisting of 6 x 9mm self-adhesive PCB mounts.

MK140 D Connectors Mounting Kit £1.34

MK150 Black Screw No 2 x 13mm (100 Pack) £4.68

MK160 Black Screw No2 x 19mm (100 Pack) £4.77

7


HW550 Chrome Steel Baseboard Alignment Dowel £0.77

M8 Alignment Inserts for aligning baseboards, one set per sale.

HW555 Baseboard Spring Clip £2.17

Baseboard Spring Clip, used to lock two sections of baseboard

together.

HW557 Folding Bracket, for Tables and Benches £7.36

38mm x 38mm Galvanized steel leg bracket

Locks in open and closed positions

HW562 Baseboard 80mm Adjustable Foot £0.73

Slot in screw tip provides simple adjustment of plinth height

using a screwdriver. Load carrying capacity approx. 300 kg

(static). Galvanized steel. Includes protective cap.

HW570 M10 Galvanized Foot Adjuster Bracket £1.44 Suitable for use with adjustable feet with M10 internal thread

• Hexagonal nut, M10 thread with cross-slot screw-driver and

allen key adjustment

• Can also be used in combination with knock in and threaded

sleeves.

• Galvanized steel screw with black plastic foot

HW571 M10 'T' Threaded Insert (5 Pack) £1.05

A 4 prong M10 threaded insert for height adjuster feet. Internal

Thread M10, sleeve 11.3mm, length 11mm

HW580 57mm Turntable Ball & Race 50kg £6.86

Suitable for Turntables of all kinds

Installation Screw fixing

Load bearing capacity 50 kg, Height 10.5 mm

Dim. Overall size - 57 mm, Material Steel galvanised

HW582 13mm Stabilizing Roller 50kg £0.49

Suitable for 360° turntable - Installation Screw fixing

Load bearing capacity 50 kg - Height 13 mm, Dim. Roller Ø - 13 Material Steel/Polyamide

Finish Housing - Galvanised/Wheel - Black

Microswitch V4 Ultra Miniature

Ideal for all position sensing. Points, Locos, etc

SW052 Lever Switch £0.75

SW053 Button Switch £1.00

SW054 Roller Switch £2.92

Miniature Round Push to Make Switches £0.43

A range of low-cost, miniature push to make and push to break

switches that are available in various button colours. Red SW561, Black SW562,

Yellow SW563, Green SW564,

Blue SW565, White SW566.

Square Push Button Latching & Momentary £0.46 Available in 4 different colours and either Latching or Momentary.

Latching Momentary SW501 Yellow , SW504 Red SW506 Green, SW507 Black

SW502 Green SW508 Red

SW503 Black SW509 Yellow

Nickle Push Button Switches Low profile, light duty mains rated push switches. Momentary action

Panel mounting with chrome bezel and rear fixing locking nut.

Rating: 1.5A 250V AC. Panel cut out size: 12.7mm

SW530 Push to Make (Black) £2.73, SW532 Push to Break (Black) £1.65

SW531 Push to Make (RED) £1.65.

Miniature Slide Switches

SW149 SPDT 500mA £0.16 SW150 DPDT 300mA £0.3

SW151 DPDT Centre OFF £0.32 SW152 DPDT 500mA £1.20

SW153 SPST 500mA £1.46

Rotary Switches £1.75 High quality make-before-break Rotary Switch. Adjustable rotation stop

Mounting bush 9.8mm diameter, Spindle length 40mm, Diameter 26mm

Contact rating 300mA 125V AC

SW191 1 Pole 12 Way SW192 2 Pole 6 Way

SW194 3 Pole 4 Way SW196 4 Pole 3 Way

Documents

A5 Complete Price List 21-06-18 Version · Email: [email protected] or andre [email protected] Sales Telephone: 01429 297277 Brimal also supply a complete range of Electronic Components