A1 (KG UNLESS OTHERWISE SPECIFIED) 47613761001 C

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4

COPYRIGHT @ 2018Ingersoll Rand

ALL RIGHTS RESERVED

CAD GENERATED DRAWING,NO MANUAL REVISIONS ALLOWED

DRAWING CONFORMS TOASME Y14.5M - 1994

DO NOT SCALE DRAWING

PROPRIETARY NOTICE

UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED

UNLESS OTHERWISE SPECIFIED:- REMOVE ALL BURRS AND SHARP CORNERS- WELD SYMBOLS TO BE IN ACCORDANCE WITH ANSI/AWS A2.4

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES THAT, EXCEPT AS AUTHORIZED IN WRITING BY INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM.

WARNING: THE EXPORT OR REEXPORT OF THIS DRAWING OR A PRODUCT PRODUCED BY THIS DRAWING IS SUBJECT TO U.S. EXPORT ADMINISTRATION REGULATIONS AND OTHER APPLICABLE GOVERNMENT RESTRICTIONS OR REGULATIONS.

THIRD ANGLE PROJECTION

DWG NO.

PART NO.

ESTIMATED WEIGHT(KG UNLESS OTHERWISE SPECIFIED)A1

NAME

SIZE

MODEL SHEET

REVISION

SCALE

R

REVISIONSAPPROVEDDRAWNDATEDESCRIPTIONECNREVZONE

XH.ZHONGT.WU2017JUL03ORIGINAL RELEASE1247397AXH.ZHONGT.WU2017DEC06NOTE 4: 45 WAS 42, 12 WAS 11.1278122B

P.JINT.WU2018DEC10UPDATE AIR INTAKE AND EXHAUST PANEL APPEARANCE1330468C

GENERAL ARRANGEMENT DRAWING,AIR COOLED (RS45-75I) GENERAL ARRANGEMENT DRAWING, AIR COOLED (RS45-75I)

SEE NOTE 1 47613761001 47613761001 C0.15 RS45-75 9 OF 1

For Internal Use : Model = 47613761001 | ASSEM | | | | Drawing = 47613761001 | DRAW | | | |

DRAWN DATE

T.WU 2017JUL03CHECKED DATE

P.JIN 2017JUL03APPROVED DATE

XH.ZHONG 2017JUL03DRAWING TYPE

General Arrangement DrawingNOMENCLATURE

GENERAL ARRANGEMENTTOLERANCES

ALL DIMENSIONS ARE IN MILLIMETERS

[INCHES (IF SHOWN)]

UNSPECIFIED TOLERANCES:

ANGLES .X

WHOLE :::

13.0[.50] 6.0[.25] 1

Ingersoll-Rand Industrial Technologies

NOTES: 1. WEIGHT (APPROXIMATE): RS45I (NO DRYER) – 1841 KG (4059 LBS) RS55I (NO DRYER) - 1936 KG (4268 LBS) RS75I (NO DRYER) - 1962 KG (4325 LBS) RS45I (DRYER) - 1994 KG (4396 LBS) RS55I (DRYER) - 2089 KG (4605 LBS) RS75I (DRYER) - 2115 KG (4663 LBS) 2. COOLING AIR FLOW: R45I, R55I: 6,500 M3/HOUR (3820 CFM) R75I: 10,540 M3/HOUR (6200 CFM) 3. PIPE CONDENSATE DRAIN LINES SEPARATELY TO AN OPEN DRAIN DUE TO DIFFERENCES IN DRAIN PRESSURES. READ OPERATIONS MANUAL AND CHECK LOCAL REGULATIONS. 4. LUBRICANT FILL QUANTITY: 45 LITRES (12 US GALLONS) 5. RECOMMENDED CLEARANCE ON THREE SIDES 915 MM (36 INCHES) SIDE WITH ELECTRICAL BOX 1067 MM (42 INCHES) OR MINIMUM AS REQUIRED BY LATEST NATIONAL ELECTRICAL CODE OR APPLICABLE LOCAL CODES. 6. EXTERNAL PIPING SHOULD NOT EXERT ANY UNRESOLVED MOMENTS OR FORCES ON UNIT. USE PIPE OF EQUAL OR GREATER SIZE AT DISCHARGE LOCATION OF UNIT. 7. THERE SHOULD BE NO PLASTIC OR PVC PIPING ATTACHED TO THIS UNIT OR USED FOR ANY LINES DOWNSTREAM. 8. REMOVE THE ISOLATION MOUNT RESTRAINTS BEFORE THE INITIAL START. THE RESTRAINTS CAN BE DISCARDED. 9. FIELD INSTALLED DUCTING TO AND FROM COMPRESSOR CANNOT ADD MORE THAN 6MM (.25 INCH) OF WATER TOTAL AIR RESISTANCE. 10. UNIT HAS AN INTERNAL DISCHARGE CHECK VALVE, EXTERNAL CHECK VALVE NOT REQUIRED. ISOLATION VALVE REQUIRED WITHIN 915 MM (36 INCHES) OF THE COMPRESSOR DISCHARGE. 11. COMPRESSOR SHOULD BE BOLTED TO THE FLOOR WITH FOUR M20 (3/4 INCH) BOLTS USING HOLES SHOWN ON SHEET 5. SEAL BASE TO FLOOR WITH CORK OR RUBBER. 12. DO NOT PIPE INTO A COMMON HEADER WITH A RECIPROCATING COMPRESSOR. UNLESS RECIP COMPRESSOR UTILIZES A DISHCHARGE PULSATION DAMPENER. 13. DENOTES CENTER OF GRAVITY. 14. SIZING OF ELECTRICAL COMPONENTS NOT SUPPLIED BY INGERSOLL-RAND IS THE RESPONSIBILITY OF THE CUSTOMER AND SHOULD BE DONE IN ACCORDANCE WITH THE INFORMATION ON THE COMPRESSOR DATA PLATE, NATIONAL AND LOCAL ELECTRIC CODES. 15. A BLANK GLAND PLATE IS PROVIDED FOR ELECTRICAL POWER INLET AS INDICATED. 16. WHEN INSTALLED INDOORS IN A CONFINED SPACE, THE COOLING AIR INLET OR EXHAUST MUST BE DUCTED AWAY FROM UNIT TO PREVENT RECIRCULATION OF HOT EXHAUST AIR. CONNECTION LEGEND - ALL 60 Hz CONNECTIONS ARE NPT (UNLESS SPECIFIED OTHERWISE) - ALL 50 Hz CONNECTIONS ARE BSPT (UNLESS SPECIFIED OTHERWISE) A. DISCHARGE AIR: 2.0 INCH (FEMALE) B. ELECTRICAL INLET: BLANK PLATE SUPPLIED C. PACKAGE AIR INLET (COMPRESSOR) D. PACKAGE AIR EXHAUST (COMPRESSOR) E. PACKAGE AIR INLET (DRYER) F. PACKAGE AIR EXHAUST (DRYER) G. CONDENSATE DRAIN (MOISTURE SEPARATOR): .375 INCH (FEMALE) THIS CONNECTION IS NOT USED ON NO MOISTURE SEPARATOR UNITS. H. CONDENSATE DRAIN (FILTER): .375 INCH (FEMALE) J. CONDENSATE DRAIN (DRYER): .375 INCH (FEMALE) K. WATER OUTLET: 1.50 INCH (FEMALE - ERS OPTION ONLY) L. WATER INLET: 1.50 INCH (FEMALE - ERS OPTION ONLY)

THIRD ANGLE PROJECTION

12-12?-2018 09:26:51 (model C.1/C.2)

RELEASED 21/Dec/2018 08:41:43 GMT

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4

PROPRIETARY NOTICETHIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES THAT, EXCEPT AS AUTHORIZE D IN WRITING BY INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADESECRET INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM.


NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

GENERAL ARRANGEMENT DRAWING,AIR COOLED (RS45-75I)

GENERAL ARRANGEMENT DRAWING, AIR COOLED (RS45-75I)

47613761001

47613761001 C0.13 9 OF 2

C.2

LEFT END

FRONT

RIGHT END

REAR

12-12?-2018 09:26:51 (model C.1/C.2)


8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

265[10.5]

445[17.5]

C

242[9.5]

695[27.4]

C

990[39]

415[16.3]

120[4.7]

790[31.1]

147[5.8]

A

B

G

2032[80]

1420[55.9]

209[8.2]

241[9.5]

311[12.2]

2433[95.8]

1202[47.3]

1112[43.8]

378[14.9]

D

63[2.5]

1076[42.4]

D

647[25.5]

1406[55.4]

1250[49.2]

4[0.2](TYPICAL FOR ALLLATCHED DOORS)

5[0.2]

73[2.9]

1220[48]

1357[53.4]

395[15.6] GENERAL ARRANGEMENT DRAWING,

AIR COOLED (RS45-75I)GENERAL ARRANGEMENT DRAWING, AIR COOLED (RS45-75I)

47613761001

47613761001 C0.13 9 OF 3

C.2

OPTION: NO DRYER

D

C

SEE DETAIL AFRONT VIEW

LEFT END VIEW

TOP VIEWSEE DETAIL E

DETAIL ESCALE 1.000

DETAIL ASCALE 0.750

G

AIR FLOW

12-12?-2018 09:26:51 (model C.1/C.2)A

IR F

LOW


8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

267[10.5]

399[15.7]

E

1091[42.9]

675[26.6]

E

695[27.4]

C

242[9.5]

267[10.5]

445[17.5]

C

415[16.3]

790[31.1]

120[4.7]

73[2.9]

147[5.8]

80[3.2]

160[6.3]

A

G

B1420[55.9]

209[8.2]

241[9.5]

311[12.2]

2032[80]

2433[95.8]

400[15.7]

F

328[12.9]

452[17.8]

63[2.5]

1076[42.4]

D

1202[47.3]

990[39]

1220[48]

1250[49.2]

1357[53.4]

395[15.6]

73[2.9]

4[0.2](TYPICAL FOR ALLLATCHED DOORS)

1112[43.8]

378[14.9]

R714[28.1]

R929[36.6]

R618[24.3]

R752[29.6]

654[25.7]

1305[51.4]



47613761001

47613761001 C0.13 9 OF 4

C.2

OPTION: WITH DRYER

D

F

C

E

SEE DETAIL F

TOP VIEW

SEE DETAIL B

FRONT VIEWLEFT END VIEW

H

J

DETAIL BSCALE 1.000

DETAIL FSCALE 0.750

G, H & J

12-12?-2018 09:26:51 (model C.1/C.2)

AIR FLOW

AIR FLOW

AIR

FLO

W

AIR

FLO

W


8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

44[1.7]

14[0.5]

952[37.5]

730[28.7]

4X 23[0.9]

36[1.4]

1130[44.5]

2X 16[0.6]

(BOTH SIDES)

2X 76[3]

(BOTH SIDES)

486[19.1]

93[3.7]

70[2.8]

851[33.5]

(BOTH SIDES)

2X 203[8]

(BOTH SIDES)

730[28.7]

(BOTH SIDES)



47613761001

47613761001 C0.13 9 OF 5

C.2

SEE DETAIL D

REAR VIEW

K (ERS OPTION)

L (ERS OPTION)

SEE DETAIL C

BOTTOM VIEW

DETAIL CSCALE 1.000

(ERS OPTION ONLY)DETAIL D

SCALE 0.600

A

12-12?-2018 09:26:51 (model C.1/C.2)


8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

274[10.8]

450[17.7]

C

215[8.4]

717[28.2]

C

2362[93]

2432[95.7]

330[13]

D

1202[47.3]

D

2469[97.2] GENERAL ARRANGEMENT DRAWING,

AIR COOLED (RS45-75I)GENERAL ARRANGEMENT DRAWING, AIR COOLED (RS45-75I)

47613761001

47613761001 C0.10 9 OF 6

C.2

LEFT END

FRONT

GENERAL ARRANGEMENT WITHOPTIONAL OUTDOOR MODIFICATION(OPTION IS NOT AVAILABLE FOR DRYER OR VSD UNITS)

C

D

AIR FLOW

AIR FLOW

12-12?-2018 09:26:51 (model C.1/C.2)


8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

175[6.9]

929[36.6]

297[11.7]

2730[107.5]

2767[108.9]

237[9.3]

780[30.7]

C

317[12.5]

430[16.9]

C

200[7.9]

627[24.7]

R550[21.6]

40[1.6]



47613761001

47613761001 C0.13 9 OF 7

C.2

GENERAL ARRANGEMENT WITHOPTIONAL HIGH DUST PRE-FILTER - NO DRYER(OPTION IS NOT AVAILABLE FOR VSD UNITS)

D

C

LEFT END

FRONT

12-12?-2018 09:26:51 (model C.1/C.2)

AIR

FLO

W

AIR FLOW


8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

317[12.5]

430[16.9]

C

237[9.3]

819[32.3]

C

897[35.3]

819[32.3]

E

200[7.9]

627[24.7]

297[11.7]

2730[107.5]

2767[108.9]

1857[73.1]

175[6.9]

40[1.6]

550[21.7]



47613761001

47613761001 C0.13 9 OF 8

C.2

GENERAL ARRANGEMENT WITHOPTIONAL HIGH DUST PRE-FILTER - WITH DRYER(OPTION IS NOT AVAILABLE FOR VSD UNITS)

F D

E

C

LEFT END

FRONT

AIR

FLO

W

AIR

FLO

W

AIR FLOW

AIR FLOW

12-12?-2018 09:26:51 (model C.1/C.2)


8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

3[0.1](THIS VALUE NEEDS TOBE ADDED TO ALLHEIGHT DIMENSIONSWHEN THIS OPTIONIS PURCHASED)



47613761001

47613761001 C0.13 9 OF 9

C.2

GENERAL ARRANGEMENT WITHOPTIONAL CONTAINMENT BASE

LEFT END

FRONTSEE DETAIL G

DETAIL GSCALE 0.500

12-12?-2018 09:26:51 (model C.1/C.2)


Documents

A1 (KG UNLESS OTHERWISE SPECIFIED) 47613761001 C