Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Bill of quantitiesSpecification Others Total
Section I All Inclusive of installation with 3 year warrenty.
39 Nos
12 Nos
Annexure -III( to be submitted in the envelop -II Price bid cover)
The Principal Accountant General (A&E),AP,Hyd,
Name of the Item
Total Qty
Unit Price
Excise duty
CST / VAT
(A) Work stations type 1
50 - 60mm thick Tile Based Partition System (with 100% Aluminium frames), Epoxi powder coated internal & External frames, size of Workstation should be 1500X1350X600X600mm, Partition and inbuilt tiles need to be Photoframe to avoid dust accumulation, Height of the partion should be 1200mm.(4'), Lower Module tiles in Prelam or steel finish and Top Module in laminate/ steel/Fabric Finish, Table top should be 25mm thick prelam finish with 2mm PVC hot pressed edge bending, Height of the table top from the ground level is 727 to 750mm, Electrical and data cables should be drawn below the table top and at skirting level as per the drawing, 3 draw pre lam 18mm thick pedestal with castors of size 400X450X680mm, One marker and one Magnetic Pinup per workstation
194 Nos
(B ) Work
stations type 2
50 - 60mm thick Tile Based Partition System(with 100% Aluminium frames), Size of Front desk should be 1650X750mm, Size of Return desk should be 1050X450mm, One credenza of size 900X450X702ht, Height of the partion should be 1200mm.(4'), Lower Module tiles in Prelam or steel finish and Top Module in laminate/ steel/Fabric Finish, Table top should be 25mm thick prelam finish with 2mm PVC hot pressed edge bending, Height of the table top from the ground level is 727 to 750mm, Electrical and data cables should be drawn below the table top and at skirting level, 3 draw pre lam 18mm thick pedestal with castors of size 400X450X680mm, One marker and one Magnetic Pinup per workstation
(C) Work
stations type 3
50 - 60mm thick Tile Based Partition System(with 100% Aluminium frames), Size of Workstation should be 1500X1650X600X600mm, Partition and tiles need to be Photoframe to avoid dust accumulation, Height of the partion should be 1200mm.(4'), Lower Module tiles in Prelam or steel finish and Top Module in laminate / steel /fabric Finish, Table top should be 25mm thick prelam finish with 2mm PVC hot pressed edge bending, Height of the table top from the ground level is 727mm - 750mm, Electrical and data cables should be drawn below the table top and at skirting level, 3 draw pre lam 18mm thick pedestal with castors of size 400X450X680mm
12 Nos
64 Nos
Double Bay (16 body) Compactor - 6 nosThree Bay (24 body) Compactor - 2 nosThree Bay (30 body) Compactor - 2 nosSingle Bay (6 Body) Compactor - 1 nos
Total
One Metalic Key Board tray with Mouse pad
Section I Total
Section II All Inclusive of installation with 1 year warranty.
(D) Cabin
work stations
Size of the front desk should be 1800X750X750ht and return of 1050X450X702 ht Rear desk of 1800X450mm, Table top should be 25mm thick and one 3 draw pre lam 18 mm thick pedestal storage of 400x450x680mm. Height of the table top from the ground level is 727 to 750mm
(E) Executive Chairs with high back
Chairs made out of 12mm thick hot pressed plywood with PU moulded foam High Back (40mm density), upholstered with fabric, with syncro Multi point locking and armrest pu moulded, Base PP moulded 5 pronged, Cylinder 100 to 110mm strock size 450X450mm base and 560X430mm back. Photograph of the model to be submitted along with the quote
(F) Executive
Chairs with medium
back
Chairs made out of 12mm thick hot pressed plywood with PU moulded foam (40mm Density) Medium Back, upholstered with fabric with syncro single point locking of size 450X450mm base and 460X430mm back, and armrest pu moulded, Base PP moulded 5 pronged , Cylinder 100 to 110mm strock. Photograph of the model to be submitted along with the quote
194 Nos
(G) Visitor Chairs
Chairs made out of 12mm thick hot pressed plywood, upholstered with fabric with S type MS Powder coated fixed understructure and armrest pu moulded of size 450X450mm base. Photograph of the model to be submitted along with the quote
116 Nos
(H) Compactors
Metallic Powder coated Body in CRCA of 22 Guage, No of adjustable shelves -- 4, Load baring capacity per shelf 70 kgs , Body Width -915mm, Body depth -455mm, Minimum height should be1980mm,Central Locking with Drive mechanism with wheel , anti tilt and sound buffer pad
210 Nos
(I) Key Board
Tray
140 Nos
(B) Flooring
.
Section II Total
Section III All Inclusive of installation with 1 year warranty.
(A) 1Nos
(B) 8 Nos
(C) VoiceFinolex 2 pair telephone cable (@90 mts)
Bestonet RJ 11 Information Outlets 70 nos
Finolex 50 pair raiser cable
50 pair MDF loded with 2/10 Modules 6 nos
100 pair MDF loded with 2/10 Modules 1 nos
(D) PVC Material & Rack
50 Mts
150x150 metal JB on the floor 10 Nos300x300 metal JB on the floor 10 Nos
(E) Raceways(DATA&VOICE Through floor)
(A) Alluminium Partition
Full Height Partation Work: Providing and fixing of full height partations made of 12mm Thick prelam particle board upto 3 ft from the finished floor level, 5 mm thick glass Partation upto 7ft height and balance with prelam with anodized alluminium powder coated framework with necessary hardware like door closer and lock, handle etc…..
4500 sft
Chipping of the existing flooring and supplying, laying full body Vetrified tile of size 600X600mm of RESTILE company model no 703 including pointing the Joints with tinted white cement to match the colour of the tile etc. The rate Quoted should be including of labour, Cement, sand etc…
20500 sft
( C ) Painting
2 cotes of white wash work for the total area (Aprox.)
25000 sft
Electrical Works
Shifting of UPS with wiring and junction box to new location in working condition (Ref Terms & Condition)
Relocation of Air Conditioners in new server room and EDP in working condition (Ref Terms & Condition)
35 Rolls
200 mts
Sudhakar 1 PVC Conduit casing caping and flexible
2000 Mts
Sudhakar 2 PVC Conduit casing caping and flexible
50X40 mm race way 60 Mts50X100 mm race way 60 Mts50x150 mm race way 30 Mts50X300 mm race way
(F) UPS
Legrend 6/10 SP MCB 65 NosLegrend 63 AMPS 4P MCB RCCB 3 NosLegrend 32 DB With double door 3 Nos
Legrend 16 AMPS SP MCB 4 Nos
70 Nos
Policab 10 sqmm coper conductor cable
Policab 6 sqmm coper conductor cable
(G) PVC Material
50 Mts
50x150 mm Perforated race way(2 mm thick)
Section III Total
Section IV
100 Mts
Polycab 2 Runs of 4,0 sqmm and 1 Run of 2,5 sqmm
4350 Mts
Legrend/ 2 Nos 6 AMPs socket controlled by 6 AMPS SWITCH
270 Nos
Policab 2 Runs of 4,0 sqmm and 1 Run of 2,5 sqmm
200 Nos
Legrend 15Amps Switch with 15 Amps5p sockt with suitable front plate and back box
800 Mts200 Mts
Sudhakar 1 " PVC Conduit casing caping and flexible
500 Mts
Sudhakar 2 PVC Conduit casing caping and flexible
130 Mts
All Inclusive of installation with 1 year warranty from Company
(A) False Celing
Amstrong celing of Model: Minatuff Microlook. Supply and fixing of Armstrong mineral fibre acoustical ceiling system with Minatuff Microlook edge tiles with Armstrong XL 15mm exposed grid. The tiles should have humidity resistance (RH) of 99%, NRC upto 0.6, Light reflectance > 88%, Thermal conductivity k = 0.052 - 0.057 w/m K, colour White, fire performance Class 0 / Class 1 (BS 476 Part 6 & 7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the file impact resistance and suitable for Green building application, with recycled content of 43%. The grid should be of Armstrong make with 15mm wide T - Section flanges colour white having rotary stiching on all T Sections i.e., the Main Runner, 1200mm & 600mm Cross Tees. The T Sections have a galvanizing of 120 grams per M2 and passed through 500 hours of Salt test.
1902 sqm
Section IV Total
Grand Total
Date: Signature of the Contractor with office seal
(B) Light Fixtures
Supply and installation, testing and commissioning of Wipro make 600 x 600mm light fixtures with down suspension rods with termination and tubes of Philips make
225 nos
NOTE:THE CONTRACTOR SHALL QUOTE HIS RATE TO INCLUDE THE COST OF MATERIAL AS PER SPECIFICATION, NECESSARY WASTAGE, LABOUR, INSTALLATION, OTHER MATERIALS, VAT, SALES TAX, EXCISE DUTY, SERVICE TAX, OCTROI, WORKS CONTRACT TAX & TURNOVER TAX, TRANSPORTATION TO WORK SITE, INSURANCE, ENTRY TAX, ALL OTHER TAXES AS APPLICABLE ETC. ALL INCLUSIVE. THIS OFFICE WILL NOT PAY ANY ADDITIONAL AMOUNT ABOVE QUOTED RATES & WILL NOT ARRANGE FOR WAY BILLS & ROAD PERMITS. IT IS THE RESPONSIBILITY OF THE SUPPLIER TO ARRANGE FOR WAY BILLS & ROAD PERMIT AT HIS OWN COST. THIS OFFICE WILL NOT PAY ANY ADDITIONAL AMOUNT OVER THE ABOVE QUOTES.