Upload
leliem
View
219
Download
3
Embed Size (px)
Citation preview
Catalog No. 9007
A Total Display Program:
DISPLAY GRAPHICSUNIVERSAL DISPLAYS
MERCHANDISERSCOUNTER DISPLAYS
©2011 Malco Products, Inc.9007P
2
UNIVERSAL DISPLAYSCat. No. 9007
TEMPLATE DISPLAYSJust snap on your pegboard wall. Bright red on yellow styrene sheet sets off tools displayed. Starter hardware (hooks, reorder tags and canoe clip fasteners) included.
FRAMES AND COUNTERACCESSORIES
Order styrene frames with pegboard panels for mounting templates on block walls, ends of picking bins, etc. Feet are also available for converting frames and templates to counter units.
TEMPLATE U2432FRAME (add #) F2432FEET (add #) DDF
Feet Frame(withpegboard) Template
HARDWARE SET
HDW25 - Pegboard hook and tag set. Order as needed for display layout. Contains (25) hooks and generic reorder tags per set.
SHDW25 - Slatwall hook and tag set. Order as needed for display layout. Contains (25) hooks and generic reorder tags per set.
Dedicated Tool-Specific Re-Order Tags are available for many products and can be requested by simply adding an “RT” infront of the catalog number when ordering. (Note: re-order tags default to a generic tag when tag requested is not available.)CBRF - 10 ft. Clamshell Card Replacement Wire. A short 6” to 7” strand of wire will re-attach most tools to the clamshell. Just cut to length and feed ends through existing holes. Pull the wire tight, twist and trim the ends.
U2432 - 24”(610 mm) x 32”(813 mm)
3
Cat. No. 9007
CIRCULAR SAW BLADE DISPLAY
SCRATCH AWL SHELF
Cat. No. Qty.
DDSAX A3 6A2 12A1 12A20 6A10 6A0 6A00 12
UNIVERSAL SHELF
DDSU - Mix it up with our Universal Shelf! Display Malco Screwdrivers, Nut Drivers, Power Drives or Scratch Awls on one shelf.
DD83X - Dispensing display for
BiMetal Hacksaw
Blades.
DD81X - Dispensing display for General Purpose Blades. Wire frame holds up to 300 blades. Display mounts on 1/4” (6.35 mm) or 1/8” (3.175 mm) pegboard.
p Order merchandise separately from above displays. p
WINDOW DECALSL6128 - Authorized Distributor window decal measures 6-5/8” (168 mm) x 9-1/4” (935 mm). Bright red on yellow with silver script.
RECIPROCATING SAW BLADE DISPLAYRSBP / RSBS - Compact 11” (279 mm) x 17” (432 mm) display template with spaces for 6 saw blade sizes / facings. Also features handy selection chart. Stack multiple templates or place side by side for larger blade display. Comes with permanent-hold, double face tape tabs for mounting and your choice of pegboard or slatwall hooks.
RSBP- Blade Template with Pegboard Hooks (No. 26429)RSBS-Blade Template with Slatwall Hooks (No. 26430)
SAMPLE PACKSSL1064 Zip-in® ScrewsSL2679 Painted Sheet Metal ScrewsSL1478 Bit-Tip® Screws
LITERATURE RACKSLCS - Five pocket wire frame. Ideal for dispensing Malco catalogs and trade prices. Mount on pegboard wall or use as free-standing counter display.
MERCHANDISERSEasy to maintain. Keeps inventory visable.
HACKSAW BLADE DISPLAY
SLCS - Five pocket wire frame. Display carded saw blades in a small amount of space. A full display uses only a 12” (305 mm) x 18” (457 mm) wall space area.
Attach to 1/4” (6.35 mm) or 1/8” (3.175 mm) pegboard or use as a free-standing counter display.
4
Cat. No. 9007DISPLAY CENTER
Use with Malco header signs or graphics to
create a distinctive wall display background.
Backer Sheets fill any even numbered pegboard or slat wall width dimensions down to 26” (660 mm) without trimming.
Just overlap to fit and background will always match up!
U2626SL SLAT WALL
U2626SW PEGBOARD4’ (1219 mm)
4’ (1219 mm)
8’ (
2438
mm
)
8’ (
2438
mm
)
5
DISPLAY CENTERCat. No. 9007
• BACKER SHEETS ARE PACKAGED 8 PER BOX TO COVER A NOMINAL 4’ (1219 mm) x 8’ (2438 mm) PEGBOARD OR SLAT WALL AREA.
• PRE-APPLIED TAPE STRIPS MAKE INSTALLATION FAST AND EASY – JUST PEEL AWAY THE TAPE STRIP LINER.
LARGE HEADERSFor topping pegboard and slat wall,
aisle gondola or endcap displays. May be flush mounted with separate
hardware kits. (Large Header Signs do not fit Channel Rack).
Headersareflushmountedinthis
pegboardwallillustration.
HTC2 (TOOL CENTER) HBI2 (BETTER IDEAS) signs are available in standard 2’ widths. The HTC3 (TOOL CENTER) sign may be used for topping standard 3’ wide end cap displays or to finish off uneven running feet of aisle or wall displays. See examples below.
HTC2
HBI2
HDK2FFLUSH MOUNT KIT FOR PEGBOARD AND SLAT WALL.
Overlap display sheets across 3’ (914 mm)
wide end caps.
HTC3 Header illustrated here is flush mounted across 3’ (914 mm) width of end cap.
7’ (2134 mm) wide pegboard and slat wall or aisle gondola.
2’ (610 mm) HTC2 2’ (610 mm) HBI2 3’ (914 mm) HTC3
CHANNEL RACK: Designed to hold various size graphics flush mounted on pegboard, slat wall, or suspended overhead with separate hardware kits. This wide plastic extrusion consists of 9 rows of standard 1-1/4” (32 mm) channel on two sides. Easy-to-handle 2’ (610 mm) and one 1’ (305 mm) are versatile for topping off any pegboard or slat wall expanse, aisle gondola or end cap display.
HEADERS: For use with Large pictures. Available as product category headers and “Better Ideas” slogan.
PICTURES: For use overhead across pegboard or slat wall displays or over counter area.
DESCRIPTIONS: For optional use with large pictures. Provides catalog number and/or name of item(s) featured in picture. Standard 1-1/4” (381 mm) channel also allows you to substitute a custom sales message by using a commercially available 1-1/4” (32 mm) lettering kit.
A la Carte Display Components
CHR2 CHR1
CHANNEL RACKSUse 1’ (305 mm) width (CHR1) to finish off uneven running feet of aisle or wall display.
Cat. No. Description
CHR1 1’ w (305 mm), 9 channel, 2 sided rackCHR2 2’ w (610 mm), 9 channel, 2 sided rack
MOUNTING HARDWARE: Order 1 Kit per RackHFK Flush Mounted on pegboardHOHK Suspended Overhead from ceiling grid.HSWK Flush Mount on slat wall
HEADERS for Channel RackOrder 1 each per running foot of Channel Rack, alternating “Better Ideas” slogan with appropriate category headers.
Cat. No. Description
HBI Better Ideas for the Real WorldHDG Downspout and Guttering ToolsHFD Fiberglass Duct ToolsHMH Metalworking Hand ToolsHST Siding Tools
HOHK - OVERHEAD SUSPENSIONKIT
HFK - PEGBOARD FLUSH MOUNT KIT
*
*
HSWK- SLAT WALL CHANNEL RACK KIT
6
DISPLAY GRAPHICSCat. No. 9007
7
Cat. No. 9007GRAPHICAPPLICATIONS
Example 2 - A 2’ (610 mm) Channel Rack with Headers, Large Pictures and Descriptions on two sides used as an aisle sign SUSPENDED OVERHEAD.
Example 3 - Channel Racks may be joined together to create a double row. In this example, two Racks are stacked to create a combination cross merchandiser and message board for use with commercially available 1-1/4” (32 mm) lettering kit. The 2 piece message strip shown is a standard display component of the PROFIT BUILDERS display program.
Example 1 - 2’ (610 mm) and one foot Racks FLUSH MOUNTED across a 3’ (914 mm) wide end cap display.
8
LargePicture No.PALF1Descr.Strip No.DF1
1” FASGROOV
LargePicture No.PALFDC1Descr.Strip No.DFDC1
FDC1
LargePicture No.PALFCFGDescr.Strip No.DFCFG
FCFG
LargePicture No.PALFBSNDescr.Strip No.DFBSN
FBSN
LargePicture No.PALFCNDescr.Strip No.DFCN
FCN
LargePicture No.PALFCG2Descr.Strip No.DFCG2
FCG2
LargePicture No.PALFCC3Descr.Strip No.DFCC3
FCC3
LargePicture No.PALFCC4Descr.Strip No.DFCC4
FCC4
LargePicture No.PALFCC7Descr.Strip No.DFCC7
FCC7
LargePicture No.PAL1812FDescr.Strip No.DFT
18F & 12F
LargePicture No.PAL24FBDescr.Strip No.D24F
24F
LargePicture No.PCL2IN1Descr.Strip No.D2IN1
2IN1
LargePicture No.PALDS2Descr.Strip No.DDS2
DS2
LargePicture No.PAL9ADescr.Strip No.D9A
9A
LargePicture No.PCLFDC2Descr.Strip No.DFDC2
FDC2
LargePicture No.PCLCTHSDescr.Strip No.DCTHS
Hole Saws
LargePicture No.PALFCSRDescr.Strip No.DFCSR
FCSR
LargePicture No.PALC5RDescr.Strip No.DC5R
C5R
LargePicture No.PALC6RDescr.Strip No.DC6R
C6R
LargePicture No.PALC4RDescr.Strip No.DC4R
C4R
PICTURES & MATCHINGDESCRIPTION STRIPS
Cat. No. 9007
9
LargePicture No.PALFG1Descr.Strip No.DFG1
FG1
LargePicture No.PALGNDDescr.Strip No.DGND
GND
LargePicture No.PALM12NDescr.Strip No.DM12N
M12N
LargePicture No.PCLMC12ADescr.Strip No.DMC12A
MC12A
LargePicture No.PCLM12GFDescr.Strip No.DM12GF
M12G
LargePicture No.PALMC12NDescr.Strip No.DMC12N
MC12N
LargePicture No.PALM14NDescr.Strip No.DM14N
M14N
LargePicture No.PCLM14ADescr.Strip No.DM14A
M14A
LargePicture No.PALMC14NDescr.Strip No.DMC14N
MC14N
LargePicture No.PALM2001Descr.Strip No.DM2001
M2001
LargePicture No.PALHC1A Descr.Strip No.DHC1
HC1A
LargePicture No.PALHC1Descr.Strip No.DHC1
HC1
LargePicture No.PALGOPDescr.Strip No.DGOP
GOP
LargePicture No.PALM12ADescr.Strip No.DM12A
M12A
LargePicture No.PALJCCRDescr.Strip No.DJCCR
JCCR
PICTURES & MATCHINGDESCRIPTION STRIPS
Cat. No. 9007
LargePicture No.PALM2003Descr.Strip No.DM2003
M2003
LargePicture No.PALM2006Descr.Strip No.DM2006
M2006
LargePicture No.PALM2004Descr.Strip No.DM2004
M2004
LargePicture No.PALMS12Descr.Strip No.DMS
MS12
LargePicture No.PALMB48ADescr.Strip No.DMB48A
MB48A
10
PICTURES & MATCHINGDESCRIPTION STRIPS
Cat. No. 9007
LargePicture No.PALSL5Descr.Strip No.DSL5
SL5
LargePicture No.PALSRT2Descr.Strip No.DSRT2
SRT2
LargePicture No.PALTNP2SDescr.Strip No.DTNP2S
TNP2S
LargePicture No.PALTS1Descr.Strip No.DTS1
TS1
LargePicture No.PALTNPFADescr.Strip No.DTNPFA
TNP FAMILY
LargePicture No.PALMS24WHDescr.Strip No.DMS
MS24WH
LargePicture No.PALMV12Descr.Strip No.DMV12
MV12
LargePicture No.PCLSTDescr.Strip No.DST
Seamers and Tongs
LargePicture No.PALSB48ADescr.Strip No.DBEAST
SB48A
LargePicture No.PALSNCDescr.Strip No.DSNC
SNC
LargePicture No.PALN1RDescr.Strip No.DN1R
N1R
LargePicture No.PALS2RDescr.Strip No.DS2R
S2R
LargePicture No.PALS3RDescr.Strip No.DS3R
S3R
LargePicture No.PALS6RDescr.Strip No.DS6R
S6R
LargePicture No.PALNHP1RDescr.Strip No.DNHP1R
NHP1R
LargePicture No.PALPL1RDescr.Strip No.DPL1R
PL1R
LargePicture No.PALSL1RDescr.Strip No.DSL1R
SL1R
LargePicture No.PALSL2RDescr.Strip No.DSL2R
SL2R
LargePicture No.PALSL8RDescr.Strip No.DSL8R
SL8R
LargePicture No.PALS9RDescr.Strip No.DS9R
S9R
11
PICTURES & MATCHINGDESCRIPTION STRIPS
Cat. No. 9007
LargePicture No.PALTSHDBPDescr.Strip No.DTSHD
TSHD
LargePicture No.PALTSF1Descr.Strip No.DTSF1
TSF1
LargePicture No.PALTSF1ADescr.Strip No.DTSF1A
TSF1A
LargePicture No.PALTSF2Descr.Strip No.DTSF2
TSF2
LargePicture No.PALTSHD1ADescr.Strip No.DTSHD1A
TSHD1A
LargePicture No.PALTSHDSDDescr.Strip No.DTSHD
TSHD
LargePicture No.PCLZDescr.Strip No.DZ
ZIP-IN SCREW
LargePicture No.PCLZBDescr.Strip No.DZB
ZIP-IN/BIT-TIP
LargePicture No.PALUC1Descr.Strip No.DUC1
UC1
LargePicture No.PALTY6Descr.Strip No.DTY6
TY6
LargePicture No.PALTY4GDescr.Strip No.DTY4G
TY4G
LargePicture No.PALTSS1ADescr.Strip No.DTSS1A
TSS1A
LargePicture No.PALTSS1Descr.Strip No.DTSS1
TSS1
LargePicture No.PALTSNS1Descr.Strip No.DTSNS1
TSNS1
SPECIAL MESSAGE STRIPSOrder both catalog numbers to create a single 1-1/4” (32 mm) x 24” (610 mm) message appropriate for “cross merchandising.”
TOOLS AVAILABLE IN TOOL DEPARTMENT
DTA DTD
SPECIAL OF THE MONTH
DSM