Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Please Note:
If the Quantity in the very left column is shown as - 0 - that item is not included, i.e. no cost shown in the right hand column either
A TechForAg 'Ready-To-Milk' Modular ParlorModel: Dbl. 12 Thorp/Germania ParaBone
Key Features: Conventional Exit - Automatic Indexing - 30" Cow-to-Cow Distance
This parlor should milk from 80 to 100 cows per hour with one Milker
Prepared For: Website Parlor # 122 - Proposal # 070617 # 11
Page 1 of 20
Qty Units Description
Cost to End-
user
24 Stalls Continous Splash Shield - Stainless - 30" spacing 3,429$
Page 2 of 20
4
Entrance and Exit Gates2 1/2 x 2 1/2 x 11ga tubing 1,714$
1 Group
Automated Cow Traffic Controls
- (2) 3" x 10" Entrance Gate Cylinders
- (2) 3" x 10" Exit Gate Cylinders
- (4) 3" x 10" stainless Cylinders for Auto Indexing $ 4,286
Cow Traffic
Controls at
last stall on
either side of
parlor
Stainless
Cylinders
operate
Entrance &
Exit Gate
Page 3 of 20
24 Stalls
Galvanized Blue Diamond Brisket Bars
Rapid Exit!With Automatic Indexing 13,500$
Page 4 of 20
24 Stalls
Stainless Gutter, Stainless Curbing - both New!
Galvanized Original Germania Grates - Remanufactured $ 8,777
Page 6 of 20
24 Units
Original Germania/RoKa C No-Arm TakeOffs
Remanufactured
Remanufactured but with high percentage of new parts
All-Air controlled, All-stainless construction
20,400$
RoKa Model RC No-Arm TakeOffs
All-Air operated - No Electronics! Ultimately Reliability!
Page 7 of 20
24 Units
Germania Top Outlet Claw - Remanufactured
- Air Forks
- 06 Shells
- 60" Milk Hose
- 108" Pulsation Hose
- Short air tubes
- Liners of your choice: Brand & Model_____________________ 11,853$
We developed this claw in 1978, the original Germania Top-Outlet Claw and have made it in its original form ever since
(Picture on the right is not the correct CIP Cup Holder. These are optionally available, see last page)
Page 8 of 20
24 Units Counterweighted Hose Supports $ 1,543
24 Stalls
Pulsation System - New!
- 3" PVC Pulsation line with hoses, fittings & wiring harness
- 3" PVC FreshAir line with fittings & hoses
- (4) FreshAir Filters, three per side
- (2) 3" PVC Cross-Overs in front & back
- Pulsators iuncluded with Claw-Clusters 1,886$
3 Units
16-Unit Excalibur Pulsation Controller
Electrician provides 120 volt receptacle nearby - bid separately! 2,786$
Page 9 of 20
80 ft
3" Lo-Line
Incl. all brackets, nipples, clamps and gaskets
Single loop, double slope line
$ 5,143
80 ft
2" CIP Lines
Incl. all brackets, nipples, clamps and gaskets
From the CIP group in the milk house to the back of the parlor. $ 2,857
60 ft
2" Discharge line - New!
from Receiver Group to Milk Tank. Includes special adapters at Tank and
Safety Switch. 2,143$
Page 10 of 20
0 Group
Traditional Receiver Group, with
Partially New, Partially Remanufactured Components, incl.
- 26" x 26" Receiver
(2) 1 1/2 hp Milk Pumps, 2nd Pump is Stand-By
Ball Check valve
3" x 3" Moisture Trap & U-Bend
LL Probes and Controller
Long Plug - Short Plug
1" Air Injector; Vacuum operated Drain -$
0 Group
Conventional CIP System with
Partially New, Partially Remanufactured Components, incl.
DeLaval C-125 Pipe Line Washer
3/4" Hot and Cold, Air Operated Water Valves
Open Wash Sink
Divert Valve and Drain
(3) Peristaltic Chemical Pumps -$
Page 11 of 20
0 Group
Compressed Air System - New!
(1) 7.5 hp SpeedAir Piston Compressor -$
Electrician provides 430 Volt 3-phase to this group
1 Group
Small Air Prep Group - APP-S - New!
Includes 1/2" copper lines & fittings to all stations of parlor 1,286$
10 hp Atlas Copco Srew Compressor & 80 gl storage tank for dry air
Page 12 of 20
0 Units
15 Hp Vacuum System with Lobe-Style Pump - New!
Gardner-Denver/Sutor-Built Pump
Includes Frequency Controllers/Variable Speed Drive designed for 'No
Interference' with Cow ID: shielded cable, none metallic enclosure, filtered
input, etc., i.e. AfiMilk compatible -$
0 ft
6" PVC Header Lines with 3" fittings to Pulsation and 4" adaptors to the CIP /
Receiver Group -$
Electrician provides 430 volt 3 phase to this Group
6" Header Line supplies CIP Receiver Group and Pulsation System
Page 13 of 20
0 Group
On-Farm Spare Parts Kit
(Contains only new parts)
Includes all essential parts for at least (1) year of operation
(2) sensors, a retract cylinder, at least (1) of each air valves, an extra LLC, seal
kit for the milk pump, PC Board for the PL Washer, several extra Pulsator, etc. -$
11 ft
2 x 5-ft Stainless Curb Extensions in Front
from Exit Gate to Breezeway Wall. Prevents manure from running into the pit;
Includes concrete guard. 707$
0 Pcs Double Compartment Sink - New! -$
0 Group
Accessories Group - New!
Hand Wash Sink, Filter Sock Holder with (1) box of Filters, SST paper towel
holder, Soap Dispenser, Hose Rack for garden hose in Milk House, etc. -$
0 squ ft
Pit Mats for 8 ft wide x 90 ft long pit floor
Color of your choice - Blue, Green, Red or White -$ Page 14 of 20
0 Unit Stainless Pit Steps - 4 steps, 30" wide - New! -$
0 ft
(2) 50ft 1" Wash-Down Hose for Cow Platforms
with solid Brass Firehose Nozzles -$
0 ft (2) x 20 ft 1" clean-up hoses for the pit -$
0 Units Traditional CIP Cup Holders -$ Page 15 of 20
0 Unit
Stainless Breezeway Fence
with (2) 3ft 'Side Wings'
- Made from 2.5" x 2.5" square stainless tubing
- 10- ft + 3 ft long, with
- (2) Horizontals and
- (4) 3 ft Verticals -$
2 Units
12-Stall Modular Platforms - New!
The structural bases of the Modules; Height of your concrete cow platform should be
34" - if you are comfortable with a 38" working height.
To be discussed! 3,429$
Page 16 of 20
We build our parlor modules on platforms, a frame work made form 2" x 4" steel tubing and usually 53" wide x 50.6 ft long for the typical
dbl. 12. Normally, we slide the Modules into place on this steel frame work, pushed by a Skid Loader.
Parlors up to dbl. 12 come on two trucks, all larger ones need four.
Page 17 of 20
Sub-Total Materials 88,594$
Less: Dairy-Direct Discount of 26% (23,035)$
Cost of Materials after DDD 65,560$
Pre-Installation Labor and Suppliesprovided by TechForAg at it's factory to convert the above materials into a Ready-To-
Milk Modular Parlor (calculated at 15% of materials) 13,289$
2 Trucks
Freight - @ $750/truck(In Wisconsin, slightly higher charges elsewhere) 1,500$
On-Site Installation Labor, Supplies & Expenses 8,500$
Grand Total Parlor with Freight & Installation 88,849$
Per Stall 3,702$
Summary Page
Page 18 of 20
24 Units
Fold-Up CIP Cup HoldersDo not need Rubber Cups
(To be discussed…) 6,686$
24 Units
Air-Powered CIP Cup HoldersJust push a button - Now you see them - then you don't 9,909$
24 Stalls
1" Kraiburn Rubber Mats (Made in Germany) - New! For the (2) Modular Cow Platforms
Plus Freight and Installation 3,024$
Optionally Available
Page 19 of 20
3) 5% on start-up of milking
4) $1,000 Rebate for prompt payment
4) 5% on Start-up of Milking
4) $1,000 Rebate for prompt payment
Terms - IIIf production at TFA starts more or less immdiately
1) 35% at signing of contract, plus
2) 25% six weeks later
2) 35% on delievery of parlor to the dairy
3) 45% on delivery of parlor to the dairy
Terms - IIf production at TFA starts several months in the future
1) 15% down at signing of contract
2) 35% on start of production
Page 20 of 20