www.calspas.com

Keeping your spa warm better than ever before!Cal Spas Thermo-Shield™ Natural Fiber Spa Insulation is made from post consumer recycled denim that is highly resistant to fire and

offers excellent thermal and acoustical performance. It is used in the frame of the spa cabinet to reflect radiant heat from pumps and equipment back into the spa, where it can be absorbed into the plumbing. Heating efficiency will be improved by raising and

maintaining water temperatures with less energy required. These factors lead to overall lower energy use and savings

THERMO-SHIELDTM

Natural Fiber Spa Insulation Made from Thermally Bonded Post Consumer Recycled Denim

A Perfect Fit

Cal Spas Thermo-Shield insulation system starts by installing a unique material primarily comprised of recycled post consumer recycled denim. This 3” thick insulating material foundation is then thermally bonded with a 99% Pure Aluminum Reinforced Foil Sheet on one side creating a Radiant Heat shield which directs motor and equipment heat back into the spa, maintain heat and increasing energy efficiency. Next we install a layer of dual walled reflective bubble foil to floor area of the spa to reflect heat upward into the spas seat and floor. Finally we add an ABS liner or ABS molded pan that locks in heat and keeps moisture out.

Cal Spas Thermo-Shield™

I N S u l A T e d R A d I A N T H e A T S H I e l d S y S T e m

www.calspas.com

3” Thick Thermo-Shield with Aluminum Reinforced Foil Cal Spas Thermo –Shield™ Insulation and the radiant heat barrier it creates is 18% more efficient than current energy standards set by the California Energy Commission (CEC) for spas

Dual Walled Reflective Bubble Foil Flooring

ABS Liner or ABS Molded pan that locks in heat and keeps moisture out.

Controlled Air Space Pump and equipment life are greatly improved by utilizing the entire spa cabinet for airflow rather than conventional methods of isolated equipment compartments

2455-152-20-15

Traditional foamed spa shell application prevents thermal transfer of radiant heat, wasting energy

Full Foam / Fiber CoreCal Spas Thermo-Shield equipped spasare much easier to perform maintenance or service than conventionally insulated spas.

more Benefits of Cal Spas Thermo-Shield™ Insulation Package Compared to Conventional methods of Insulating

Environmentally Friendly Cal Spas Thermo-Shield is made from recycled, non-toxic materials

Nearly Silent Operation Spas with Cal Spas Thermo-Shield operate 14% quieter than conventionally insulated spas

Better Freeze Protection Other methods of insulating often leave key components exposed to the elements with separated equipment bays and outside air intake lines.

15% More Efficient Cal Spas Thermo-Shield Insulation is 15% more efficient than spas with typical urethane full foam insulation.

Warm Air Injection Unlike foam filled or Fiber filled spas, Cal Spas Thermo-Shield insulation provides a warm air environment from where Air Controls draw their air, which helps maintain water tempera-ture and lower operation costs

Maintenance and Service Thermo-Shield equipped spas are much easier to perform maintenance on compared to conventionally insulated spas.