A NEW SYSTEM. THE NEW STANDARD. · The ergonomically designed tools are perfect for fitting into even the tightest corners. Best of all, the CH38A gets the job done for a fraction

$Page 1: A NEW SYSTEM. THE NEW STANDARD. · The ergonomically designed tools are perfect for fitting into even the tightest corners. Best of all, the CH38A gets the job done for a fraction$
A NEW SYSTEM. THE NEW STANDARD.

BRISBANE40-46 Musgrave RdCoopers Plains QLD 4108Phone: (07) 3255 6455

SYDNEY3 Metters PlaceWetherill Park NSW 2164Phone: (02) 8072 4162

CANBERRAUnit 2 No. 17 Alumina StBeard ACT 2620Phone: (02) 6185 0320 www.allensindustrial.com.au

www.asbestosremovalproducts.com.auwww.industrialvacs.com.au

About STINGER Cap and Staple Systems

At Stinger Cap System Australia, we’re about more than quality craftsmanship. We stand behind the products we sell, and we only sell the best – the STINGER Cap and Staple System. STINGER cap staples offer important moisture protection and better holding power than staples alone (you need a lot of them for a secure hold, yet every staple creates another point of weakness, another potential leak); and STINGER cap staples are the most economical choice for fastening roofing insulation, wool blanket and sarking to roofs and exterior walls. If you want fast, professional results, you need STINGER.We are proud to be the exclusive Australian distributor for this incredible product. Each cap and staple are driven in as one unit, for quick, easy installation. The tools are rugged yet lightweight, so you can reach into those tight corners with ease. Best of all, they’re ergonomically designed for hours of comfortable use.STINGER is incredibly economical. Cap hammers start at around the same price as that old-fashioned hammertacker and don’t require a compressor or hose! The pneumatic cap stapler offers stunning speed and requires a smaller compressor, and is packaged in a combo pack that includes a CH38 Cap Hammer! Each cap and staple offers powerful hold that allows you to use 60-80% fewer fasteners than staples alone, saving you time and money.

Contact us today to use the STINGER Cap and Staple System and get fast, professional results on your next building project!

STINGER CH38 Cap Hammer

A New System. The New Standard. The CH38 offers an unbeatable combination of performance and economy. Just pull the trigger and swing – with each blow, a cap and staple firmly anchor your roofing insulation, wool blanket, housewrap and sarking to roofs and exterior walls. This cap hammer gives you fast, professional results at an economical price.

With STINGER, you get the holding power of a cap with the speed and ease of a hammertacker. Each cap and staple provides a powerful hold, allowing you to use up to 80% fewer fasteners than with traditional staples alone. The caps help seal out moisture, providing enhanced protection. Best of all, STINGER fasteners are an industry “Best Practice”, recommended by DuPont and others. That’s unbeatable quality!

The economical CH38 costs the same as an average hammertacker, but the benefits are priceless! The ergonomic design makes the CH38 highly maneuverable so you can get into the tightest corners, and because it’s lightweight, you can work comfortably all day. This tool doesn’t need expensive compressors or hoses, so it’s easy to get started.

Call us now and get fast, professional results with STINGER!

Weight – 1.2 kg

Fasteners – A11 staples, 9.5mm in length. Caps are 2.5cm across

Fastener Capacity – 168 caps, 168 staples

STINGER CH38A Autofeed Cap Hammer

No Hose. No Air. No Trigger. No Problem. The CH38A Autofeed Cap Hammer offers all the value, practicality, and economy of the CH38 Cap Hammer with an added benefit – an autofeed system that eliminates the need for a trigger! Each cap and staple advances automatically so you drive them into place with one blow. This great tool is perfect to fasten roofing insulation, wool blanket, housewrap and even sarking to roofs and exterior walls.

Each blow delivers a cap and staple that offer superior holding strength over old-fashioned staples. How strong are they? By using the STINGER system, you can use up to 80% fewer fasteners than with staples alone, saving you time and money. The caps provide significant moisture resistance to protect your investment for years to come. STINGER fasteners are an industry “Best Practice” recommended by DuPont and others. You can’t beat the quality!

The ergonomically designed tools are perfect for fitting into even the tightest corners. Best of all, the CH38A gets the job done for a fraction of the cost of a pneumatic tool - you don’t need the additional expense of an air compressor or lengthy hoses. With the STINGER system, you get everything you need to get fast, professional results right out of the box.

Call us today for the best cap fastening system available – the STINGER Cap and Staple System!

Weight – 1.3 kg



STINGER CS58 Pneumatic Cap Stapler

Market leading quality and dependability. The STINGER CS58 Cap Stapler offers the best value, speed, and accuracy for applying roofing felt, housewrap, sarking and more to roofs and exterior walls. Based on National Nail’s innovative cap staple technology, this pneumatic version is faster and more efficient than ever before.

The air-driven cap stapler is incredibly fast, driving five cap staples per second. Each cap staple offers superior holding power, so you can use up to 80% fewer fasteners over old-fashioned staples. The innovative cap helps seal out moisture for an extra layer of protection. Best of all, STINGER fasteners are an industry “Best Practice” recommended by DuPont and others, so you know you can trust them.

The economical CS58 has been specially designed to be rugged yet lightweight. The ergonomic design makes this cap stapler comfortable to use while helping you reach into tight corners. Best of all, the CS58 works with smaller compressors and hoses so there’s no need to upgrade your system. Fast, professional results, stronger hold, and moisture protection – it’s the perfect choice for all your projects.

Call us today and experience the amazing STINGER CS58 Pneumatic Cap Stapler, the ultimate in speed, quality, and efficiency!

Weight – 1.8 kg

Speed – 5 cap staples per second

Fasteners – 15.9 mm 20 gauge crown staples. Caps are 2.5cm across.

Capacity – 200 caps, 200 staples

About STINGER Cap and Staple Systems

At Stinger Cap System Australia, we’re about more than quality craftsmanship. We stand behind the products we sell, and we only sell the best – the STINGER Cap and Staple System. STINGER cap staples offer important moisture protection and better holding power than staples alone (you need a lot of them for a secure hold, yet every staple creates another point of weakness, another potential leak); and STINGER cap staples are the most economical choice for fastening roofing insulation, wool blanket and sarking to roofs and exterior walls. If you want fast, professional results, you need STINGER.We are proud to be the exclusive Australian distributor for this incredible product. Each cap and staple are driven in as one unit, for quick, easy installation. The tools are rugged yet lightweight, so you can reach into those tight corners with ease. Best of all, they’re ergonomically designed for hours of comfortable use.STINGER is incredibly economical. Cap hammers start at around the same price as that old-fashioned hammertacker and don’t require a compressor or hose! The pneumatic cap stapler offers stunning speed and requires a smaller compressor, and is packaged in a combo pack that includes a CH38 Cap Hammer! Each cap and staple offers powerful hold that allows you to use 60-80% fewer fasteners than staples alone, saving you time and money.Contact us today to use the STINGER Cap and Staple System and get fast, professional results on your next building project!

STINGER CH38 Cap HammerA New System. The New Standard. The CH38 offers an unbeatable combination of performance and economy. Just pull the trig-ger and swing – with each blow, a cap and staple firmly anchor your roofing insulation, wool blanket, housewrap and sarking to roofs and exterior walls. This cap hammer gives you fast, professional results at an econom-ical price.With STINGER, you get the holding power of a cap with the speed and ease of a ham-mertacker. Each cap and staple provides a powerful hold, allowing you to use up to 80% fewer fasteners than with traditional staples alone. The caps help seal out moisture, providing enhanced protection. Best of all, STINGER fasteners are an industry “Best Practice”, recommended by DuPont and oth-ers. That’s unbeatable quality!The economical CH38 costs the same as an average hammertacker, but the benefits are priceless! The ergonomic design makes the CH38 highly maneuverable so you can get into the tightest corners, and because it’s lightweight, you can work comfortably all day. This tool doesn’t need expensive compres-sors or hoses, so it’s easy to get started.Call us now and get fast, professional results with STINGER!

Weight – 1.2 kg



STINGER CH38A Autofeed Cap HammerNo Hose. No Air. No Trigger. No Problem. The CH38A Autofeed Cap Hammer offers all the value, practicality, and economy of the CH38 Cap Hammer with an added benefit – an autofeed system that eliminates the need for a trigger! Each cap and staple advances automatically so you drive them into place with one blow. This great tool is perfect to fasten roofing insulation, wool blanket, housewrap and even sarking to roofs and exterior walls.Each blow delivers a cap and staple that offer superior holding strength over old-fashioned staples. How strong are they? By using the STINGER system, you can use up to 80% fewer fasteners than with staples alone, sav-ing you time and money. The caps provide significant moisture resistance to protect your investment for years to come. STINGER fasteners are an industry “Best Practice” rec-ommended by DuPont and others. You can’t beat the quality!The ergonomically designed tools are perfect for fitting into even the tightest corners. Best of all, the CH38A gets the job done for a frac-tion of the cost of a pneumatic tool - you don’t need the additional expense of an air com-pressor or lengthy hoses. With the STINGER system, you get everything you need to get fast, professional results right out of the box.Call us today for the best cap fastening sys-tem available – the STINGER Cap and Staple System!Weight – 1.3 kgFasteners – A11 staples, 9.5mm in length. Caps are 2.5cm acrossFastener Capacity – 168 caps, 168 staples

STINGER CS58 Pneumatic Cap StaplerMarket leading quality and dependability. The STINGER CS58 Cap Stapler offers the best value, speed, and accuracy for applying roof-ing felt, housewrap, sarking and more to roofs and exterior walls. Based on National Nail’s innovative cap staple technology, this pneu-matic version is faster and more efficient than ever before.The air-driven cap stapler is incredibly fast, driving five cap staples per second. Each cap staple offers superior holding power, so you can use up to 80% fewer fasteners over old-fashioned staples. The innovative cap helps seal out moisture for an extra layer of protection. Best of all, STINGER fasteners are an industry “Best Practice” recommended by DuPont and others, so you know you can trust them.The economical CS58 has been specially designed to be rugged yet lightweight. The ergonomic design makes this cap stapler com-fortable to use while helping you reach into tight corners. Best of all, the CS58 works with smaller compressors and hoses so there’s no need to upgrade your system. Fast, pro-fessional results, stronger hold, and moisture protection – it’s the perfect choice for all your projects.Call us today and experience the amazing STINGER CS58 Pneumatic Cap Stapler, the ultimate in speed, quality, and efficiency!Weight – 1.8 kgSpeed – 5 cap staples per secondFasteners – 15.9 mm 20 gauge crown staples. Caps are 2.5cm across.Capacity – 200 caps, 200 staples


STINGER cap and staple systems from Allens Industrial, offer better holding power and moisture

protection than traditional staples for best practice installation. Best of all, STINGER offers both pneumatic

and airless solutions to get fast, professional results.

These rugged yet lightweight tools are ergonomically designed for maneuverability. Easy-to-use and cost-

effective, they are an exceptional value. Contact us today and experience STINGER’s competitive pricing

and superior performance.

CH38

Weight: 1.2kg.

Fasteners: A11 Staples.

9.5mm in length.

Caps 2.5cm across.

Capacity: 168 Caps.

168 Staples.

CH38A

Weight: 1.3kg.


9.5mm in length.

Caps 2.5cm across.

Capacity: 168 Caps.

168 Staples.

NO HOSE. NO AIR.NO PROBLEM.



CANBERRAUnit 2 No. 17 Alumina StBeard ACT 2620Phone: (02) 6185 0320

www.allensindustrial.com.auwww.asbestosremovalproducts.com.au

www.industrialvacs.com.au


STINGER cap and staple systems from Allens Industrial Corp, offer better holding power and moisture

protection than traditional staples for best practice installation. Best of all, STINGER offers both pneumatic

and airless solutions to get fast, professional results.

These tools offer better holding power and longer staple length than the trigger and auto hand tools.

For faster more accurate usage for installation of insulation.

CS58

Weight: 1.8kg.

Speed: 5 Cap Staples/Sec.

Fasteners: 15.9mm in length.

9.5mm 20 GaugeCrown Staples.

Caps 2.5cm across.

Capacity: 200 Caps.

200 Staples.

WITH HOSE. WITH AIR.MORE POWER.

CROSSFIRE CAP STAPLER

Weight: 2.18kg.


Fastener Type:11.11mm crownstaples,18 gauge in 100 count strips.25.4mm Plasti-Top® collated caps in 200 count rolls.

Fastener Lengths:22.2mm #136044, 31.75mm #136074, 38.1mm #136094

Fastener Capacity:200 staples, 200 caps.






CH38 CAP HAMMER (Trigger)

Weight: 1.2kg.


9.5mm in length.

Caps 2.5cm across.

Capacity: 168 Caps.

168 Staples.

STINGER CH38 CAP HAMMER

The first hammer tacker to deliver a cap and staple; airless option - no air, no hose, no problem

Priced like a hammertacker - Suggested Retail $: (As per price guide)

Promotes best practice installation for roofing insulation/vapour barrier ie. roof sarking, insulation wool blanket and builders wall wrap, felt and housewrap (caps provide moisture barrier; better holding power than staples alone or same quantity amount as per foil fixing tabs. 60-80% fewer fasteners required to get the job done as compared to staples alone); Best practice promoted by Dupont Tyvek.

9.5mm STINGER StaplePac 2016 count box6/master - 24 masters/skid

Lightweight - 1.2kg.

5-8 times faster than hand drive

Introducing STINGER’s revolutionary new method for fastening roofing insulation, wool blanket, and sarking to roofs and exterior walls.

A new system. The new standard.






CH38A AUTOFEED CAP HAMMER

Weight: 1.3kg.


9.5mm in length.

Caps 2.5cm across.

Capacity: 168 Caps.

168 Staples.

STINGER CH38A AUTOFEED CAP HAMMERNo hose. No air. NO TRIGGER. No problem.

Autofeed cap system for roofing and housewrap installers; no hassle/cost of compressor, hoses

This cap system drives a cap and staple automatically - the advanced autofeed doesn’t require a trigger; airless option - no hose no air, no problem

Suggested Retail $: (As per price guide)



Lightweight - 1.3kg.

5-8 times faster than hand drive

NOW AVAILABLE






CS58 CAP STAPLER (Pneumatic)

Weight: 1.8kg.


Fasteners: 15.9mm in length.

9.5mm 20 GaugeCrown Staples.

Caps 2.5cm across.

Capacity: 200 Caps.

200 Staples.

Best value pneumatic cap system for roofing felt and housewrap installers where speed and

maneuverability is important and a longer length stapleis needed.

Lightweight, compact and maneuverable; requires less air / smaller hose and compressor

Best value pneumatic toolSuggested Retail $: (As per price guide)



Lightweight - 1.8kg

Shoots 5 cap staples per second

CS58 CAP STAPLER (Pneumatic)Proven Crossfire Technology






Documents

A NEW SYSTEM. THE NEW STANDARD. · The ergonomically designed tools are perfect for fitting into even the tightest corners. Best of all, the CH38A gets the job done for a fraction