A FULLY INTEGRATED, OUT-THE-BOX WIRELESS SOLUTION

IDS’s Xwave Wireless TechnologyXwave wireless technology is designed and manufactured in South Africa by IDS. Built for the X-Series panel range, it offers seamless integration of the world’s best wireless detection technology into Africa’s best-selling alarm.DEVELOPED BY

433Mhz frequency and local hardware design ensures optimum range and penetration for brick and concrete structures

Quick installs, total confidence with bus-managed receivers supporting 16 detectors each

Integrated system design from panel to transmitter by IDS gives total confidence in signal receipt

Comms bus supervised receiver enables reporting of tamper, supervision fail and low battery per zone

Intelligent transmitter design offers extended battery life

Custom transmitter design and factory fitment in Optex’s full range ensure no-hassle installs

X-Series simple scalability enables wireless installs up to 64 detectors, using 4 Xwave receivers

Advanced signal jamming detection capability ensures you can install wireless with total confidence

X-Series modular expansion enables ultimate flexibility for wired / wireless hybrid installs

Selectable supervision on panel and detector allows 5 levels of supervision to meet any install requirements

IDS, in partnership with OPTEX, is proud to announce the availability of the complete Wired and Wireless solution. Available on Africa's best selling alarm panels. IDS now stock OPTEX Xwave wireless detectors, OPTEX wired detectors and OPTEX low current detectors for both IDS805 and X-Series

X-Series Accessories & Modules

IN PARTNERSHIP WITH

Introducing our fully integrated out-the-box wireless solutionA complete range of Xwave devices meets any installation requirement.When you install Xwave with OPTEX, you partner with leaders in their field. Xwave technology has been developed for OPTEX detectors with the full support of OPTEX. The transmitters are manufactured and integrated with OPTEX detectors in IDS’ Durban factory, and the integrated product retains the original OPTEX factory warranty. For the first time in Africa, you can buy your favored OPTEX wireless detectors, with transmitters pre-installed.

X-Series Comms Bus

Xwave On Air Protocol

KEYPAD X-SERIES CONTROL PANEL

XWAVE WIRELESS RECEIVER XWAVE OPTEX

PROGRAMMABLE FEATURES• No activity arming• No movement reporting• Auto arm / disarm per partition• Maintenance code• Dynamic battery self test

USER FEATURES• IDS’s renowned one-button arming• Three quick arm modes:

(1) Stay, (2) Away, (3) Stay and go• User programmable stay, buzz and

chime profiles• Easy cross partition control

COMMUNICATION• Contact ID / SIA / 4x2• Dual and split reporting• Serial port for GPRS comms

X16 X64

Onboard Zones 8 8

Plug in Expander YES YES

Bus Expander - 6

Wireless Zone Support YES (16 zones) YES (64 zones)

Keypads and Partitions 8 8

PGM Outputs (onboard / total) 5 / 13 5 / 25

User Codes 128 128

Event Buffer 1000 1000

Dialler � �

Serial Port � �

IDS X-Series alarm control panels are the ideal security solution for residential and commercial environments, with a proven reputation for reliability and providing exceptional value in the industry. Offering an innovative range of wireless hybrid expansion, keypads and add on modules, it is the most versatile and cost effective security system in the market place today.

IDS X16 CONTROL PANEL - 860-1-473-X16 8 Zones expandable to 16 zones

IDS X64 CONTROL PANEL - 860-1-864-XS 8 Zones expandable to 64 zones

X-Series Control Panels

CURVE SERIES LCD KEYPAD - 860-03-0531

CURVE SERIES 16 ZONE LED KEYPAD - 860-03-XN16-IDS

CLASSIC SERIES 16 ZONE LED KEYPAD - 860-03-XS16-IDS

The X-Series keypads provide a modern, user friendly interface. Keypads can be mixed and matched using either a LCD keypad with a large LCD display, or a choice of 16 zone LED keypads for simple partition control.

X-Series KeypadsFEATURES• Multi-language (English, Afrikaans,

Portuguese, Spanish, Greek, Italian)• Up to 8 Keypads per system• Fire / Panic / Medical• Keypad tone and volume adjustable • Programmable zone input per keypad• Programmable output per keypad• IDS’s renowned one-button arming• User programmable stay, buzz

and chime profiles• Easy Cross Partition Access• Three Quick Arm modes:

Stay, Away, Stay and Go• Four user programmable Stay Profiles

IN PARTNERSHIP WITH

X-Series Protecting Your Future

FEATURES• All wireless detectors are fully supervised• RF Jamming supervision• Detector signal strength testing• Approximate range of 100m line of sight

between detectors and receiver• Receivers can be installed anywhere on the

bus to optimise installation effectiveness• All programming done from the X-Series

keypad or IDSwift2• Auto code learn• 2 Onboard outputs• Xwave transmitters are factory fitted into

the complete range of OPTEX detectors

The Xwave Wireless Zone Expander makes the X-Series control panels incredibly versatile, providing all the benefits of a fully supervised solution. Xwave transmitters are factory fitted into the complete range of OPTEX detectors. With its simple 4-wire bus connection, the receiver can be installed anywhere on the key bus to maximize range. Any combination of wired or wireless zones can be used making the X-Series control panels a true hybrid solution.

X16 - 1 Receiver, 16 Detectors

X64 - 4 Receivers, 64 Detectors

Xwave Wireless Zone Expander860-07-563

X-SERIES 8 ZONE PLUG IN EXPANDER MODULE - 860-06-X-08PI• Simple expansion from zone 9 to 16 for the X16 and X64 control panels• 8 wired, end-of-line supervised zone inputs• Small footprint, easy install, plugs directly onto the motherboard

X64 8 ZONE WIRED BUS EXPANDER MODULE - 860-06-X-08S• 8 zone bus expansion module (max 6 per system)• 8 wired, end-of-line supervised zone inputs• 2 onboard programmable outputs• Optional double end-of-line zone supervision

X64 8 ZONE SMART BUS EXPANDER MODULE - 860-06-0536• 8 zone bus expansion module (max 6 per system)• 8 wired, end-of-line supervised zone inputs• 2 onboard programmable outputs• Optional double end-of-line zone supervision* Can be used even if smart power supply is not used

X-Series Expander Modules

X-Series Accessories & Modules

The Xwave Universal Receiver, with 8 relay-driven outputs, integrates seemlessly into any control panels zone inputs, with full supervision. The quickest way to add OPTEX Xwave wireless detectors to any existing installation.

Xwave Universal 8 Channel Receiver 860-07-589

FEATURES• 8 Channel connects to any control panels zones

inputs• 3 Trouble outputs for supervision of low battery,

zone tamper and selectable RF jamming • LED indicators per channel for zone trouble

identification• Easy detector enrollment• Approximate range of 100m line of sight between

detectors and receiver• Ideal and convenient for adding OPTEX Xwave

detectors to any new or existing installation

FEATURES• Full panel control from any touch-tone phone• Arm / disarm• Bypass• Check status• Customised reporting by partition / user

The voice module allows any touch-tone telephone to act as a keypad for your X-Series alarm system. Call in from any phone and enter your access code, and the voice module will provide voice prompts to retrieve the status of or control your panel. Also provides easy-to-understand voice-reporting of alarm events.

X-Series Voice Module 860-06-X64-0412

GPRS Communicator factory mounted onto an alarm doorpanel providing greater convenience and security.

AlarmLink VDOOR 860-454-VDOOR/MDOORFEATURES• Full functionality of AlarmLink GPRS communicator• Serial integration into IDS805s and X-Series panels• Telephone dialler integration

(into most other panels)• Fitting is as simple as replacing alarm panel door

FEATURES• Controls the X-Series via any cellphone handset• Simple SMS commands with confirmation replies• Three levels of user authority:

(1) Master / (2) User / (3) Reporting• Arm / disarm with partition control• Query system status / partition status• Bypass and un-bypass zones• Trigger outputs• Customize labels (zone, site, partition)• Query airtime and manage SMS • Automatic network time update option• Multiple free web apps to choose from

The X-SMS module enables simple end-user control of X-Series panels from any SMS-enabled device. It is custom-designed by IDS for the X-Series panel range, so it has only the features you really need, enabling simple programming, installation, and use.

X-SMS Module 860-36-0485

GPRS-based alarm communication. We understand that alarm communications are the heart of your business and that absolute reliability and fanatical support is crucial to you. AlarmLink enhances this with our Smart Platform for full monitoring of units in the field.

FEATURES• Links with GPRS base station• IDS serial port or PSTN terminal connections• Full reporting of Contact ID via GPRS• Over 99% Platform uptime since 01/01/2013• Heart beat polling linked to outage notifications• Smart Platform access for unit management• Data T&C apply• Offsite log of events• Available with either a Vodacom or MTN sim card

AlarmLink GPRS Communicator 860-454-01

IDS Communications

FEATURES• Long range remote transmitters• Robust keying design• Smart management button• Supports partition and stay arming• Require firm press to activate, ensuring no

false alarms• Any button depressed for 3 seconds triggers

a panic

Recently re-launched in a black polycarbonate offering new levels of robustness, with superb battery life. When used with an X-Series Remote Receiver it enables one to 1 functionality turning each button into a user code.

X-Series Remote Transmitters 860-06-0011/0012/0014

FEATURES• 750mA Aux Power • Supervision outputs for AC fail, low battery

and auxiliary failure• Requires a minimum of 30va 16V AC transformer

and a 12V 7A hr battery• Avoids groundloop on comms bus when

implementing auxillary power on larger installs• When used in conjunction with 860-06-0536

smart expander, provides comms-bus monitoring, and isolated, auxilliary power supply

The X-SPS smart power supply module is designed for installation where additional supervised power is required, for either larger installations with multiple wired detectors, or for installations where the modules are installed in areas away from the control panel.

X-SPS Smart Power Supply 860-01-0537

FEATURES• Simple standalone proximity switch • IP65 weather proof rating• 20 tag capacity• Pulse or toggle replay• Basic programming and setup

The ProxSwitch is a weatherproof proximity switch that can be used on the X-Series to arm and disarm partitions or can be used to bypass zones.

ProxSwitch Proximity Reader 870-625-10

IDS Accessories

The X-Series receiver allows for the X-Series to be controlled from an IDS remote transmitters. Multiple receivers can be placed anywhere on the bus. Each button can be allocated to a user code, enabling PGM Triggering, arm / disarm only, Arm by partition.

X-Series Remote Receiver 860-07-02-DI FEATURES

• Up to 128 users - Full user identification• 2 Relay outputs with 1A contacts for gate and

garage control• Any key held for more than 3 secs will trigger

a panic alarm• Selectable re-trigger protection to prevent

accidental disarm• Full set up is done from the keypad• Unique one to 1 feature allows infinite flexibility

X-Series Product Overview

IDS Accessories

User Feature Programmable Feature Hardware Partitions Communication

IDS’s renowned one-button arming

No Activity Arming Dynamic Battery self test 8 Partitions Contact ID / SIA / 4x2

3 Quick Arm Modes: Stay / Away / Sat & Go

No Activity ReportingKeypad Zone &

Output TerminalsCommon Area Dual & Split Reporting

User Programmable Stay, Buzz & Chime profiles

Auto Arm / Disarm per Partition

EOL Resistor Tamper by Zone

Cross Partition AccessSerial Port for

Communication

4 User Programmable Stay Profiles

Programmable Zone Types

Programmable Zone Loop Response Time

Global Partition ControlDTMF Comms with

Voice Module

Toggle stay profiles from Stay to Night while

armed

Zone Varification and Cross Zone

Positive Triggering PGM Outputs

Outputs Programmable per Partition

SMS Comms with SMS Module

Intuitive user menu

Flexible programmable output options

Excellent Lightning Protection

Multiple master code options for partition user management

GPRS Comms with GPRS Module

IDS Modem, serial or USB connection for use with IDS control panels.

IDS Modem 860-36-0001

Connect directly to any X-Series panel using this simple interface, to upgrade firmware, download and amend programming, download event logs, and change panel status.

IDS USB Direct Connect PC Link Cable 860-320-01

FEATURES• Windows graphic user interface• Database drivers all pre-installed• Require IDS modem to operate via Telephone

Line: 860-36-0001• Fast USB direct connect, requires direct connect

cable 860-320-01• Upgrade panel firmware version• Download event log• Download and upload panel programming• Change panel status• Create and manage unique system defaults• Full user rights management & audit trail for

control room applications• Full customer management capability

IDSwift2 up & download configuration software is an advanced Windows installation tool used for local and remote programming of the X-Series control panels.

IDSwift2 Software

Detectors

• Outdoor 12 x 12m wireless detector• Low mount outdoor detector• 5 Levels of Detection Length Adjustment• 7 Horizontal Area Adjustments• Double conductive shielding• SMDA Logic for environmental noise immunity,

with efficient energy management• Advanced Temperature Compensation Logic

OPTEX Xwave VXI Wireless Detectors 862-01-VXI-R 862-01-VXI-RAM (with anti-masking)862-01-DRAM (dualtech with anti-masking)862-01-VXI-R-LC (low current - requires TX)

OPTEX VXI Wired Detectors 862-01-VXI-ST 862-01-VXI-AM (with anti-masking)862-01-VXI-DAM-XS (dualtech with anti-masking)

Flexible enough to cater for most outdoor applications

• Outdoor 24m long range PIR - 12m detection areas on both sides of detector• Variable detection range from 2 - 12m on each side• Double conductive shielding• Advanced PIR technology creates a narrow, long detection area that protects

wide horizontal areas• Limited Detection Range Function - can be adjusted to avoid detecting

unwanted objects• Layered Detection Pattern that discriminates between large & small objects

in the detection area

OPTEX Xwave BX80 Wireless Detectors 862-01-BX-80N 862-01-BX-80N-LC (low current - requires TX)

OPTEX BX80 Wired Detectors 862-01-BX-80NC

Robust coverage of entrances on the side of a building

• Built in bracket 90° horizontal• Dual element Pet PIR• IP55 and UV resistant ASA body• Operating Temperature: -20°C to +60°C• SMDA Logic• Intelligent and Detection Logic• Pet Tolerance• Active IR digital anti-masking

OPTEX Xwave FTN Wireless Detectors 862-01-FTN-R, 5x1m 862-01-FTN-RAM, 5x1m (with anti-masking)862-01-FTN-R-LC (low current - requies TX)

OPTEX FTN Wired Detectors 862-01-FTN-ST, 5x1m 862-01-FTN-AM, 5x1m (with anti-masking)

Protect building entry points with this flexible short range passive detector

Detectors

• Infrared beam interruption detection• Interruption period - variable between 50, 100, 250, 500msec (4 steps)• 99% Beam blocking stability• 4 Selectable beam frequencies• High grade aspherical lens

OPTEX Wired Dual Infrared Beams 862-01-AX-70TNC, 20m Dual Beam 862-01-AX-130TNC, 40m Dual Beam

Accurate point to point perimeter protection

• 3m High mount outdoor detector• Multiple pattern detection area technology• Pyro-element intelligent AND logic prevents false alarms caused

by small animals• IP55 and UV resistant ASA body• Vegetation sway analysis logic• Dual signal processing circuit automatically adjusts detection

sensitivity preventing missed alarms in a hostile environment

OPTEX Xwave HX40 Wireless Detectors 862-01-HX-40RAMC, 12x12m (with anti-masking)862-01-HX-40RAM-LC (low current - requires TX)

OPTEX Xwave HX80 Wireless Detectors 862-01-HX-80NRAM, 25x2m (with anti-masking) 862-01-HX-80NRAM-LC (low current - requires TX)

OPTEX HX40 Wired Detectors 862-01-HX-40C, 12x12m862-01-HX-40AMC, 12x12m (with anti-masking)

OPTEX HX80 Wired Detectors 862-01-HX-80NC, 25x2m862-01-HX-80NAMC, 25x2m (with anti-masking)

Outdoor corridor detector with exceptional range

• Infrared beam interruption detection• Interruption period - variable between 50, 100, 250, 500msec (4 steps)• Triple tamper functions• 99% Beam blocking stability• High grade aspherical lens• Battery saving timer• D.Q. circuit (environmental disqualification)• Long life battery operation (with four SAFT LSH20 batteries)

OPTEX Xwave Active IR Beams 862-01-AX-100TFRBEC, 30m Dual Beam 862-01-AX-100TFRC-LC, 30m Dual Beam (low current - requires TX)862-01-AX-200TRFBEC, 60m Dual Beam862-01-AX-200TRFC-LC, 60m Dual Beam (low current - requires TX)862-01-SL-350QNRC, 100m Dual Beam862-01-SL-350QNRC-LC, 100m Dual Beam (low current - requires TX)

Accurate point to point perimeter protection where cabling is problematic

Detectors

• 12vdc voltage input• Fully supervised• Jumper selectable open or

open / close status

Xwave Wireless Universal Transmitter 860-07-588

Universal transmitter with great flexibility

• Built-in reed switch with magnet• LED on / off selectable• Fully supervised• Small elegant design

Xwave Wireless Door Contact 860-07-587

Small slimline design with excellent range

• High mount outdoor detector• Selectable detection patterns (Pet Alley or Multi-Level)• Area-masking strips• Day and Night modes• Selectable pulse count (test or 2)

OPTEX LX Series Wired Detectors 862-01-LX-402C, Outdoor 12x15m 862-01-LX-802NC, Outdoor 24x2m

Volumetric detection ideal to trigger lightning or CCTV video recording

Detectors

• Quad zone logic• Double conductive shielding• Digital active IR anti-masking • Advanced temperature compensation logic• Grade 3 detectors

OPTEX Wired Indoor Commercial Detectors 862-01-CDX-AM 15x15m (with anti-masking)862-01-CDX-NAM 24x2m (with anti-masking)862-01-CDX-DAM 15x15m Dual Tech (with anti-masking)

Commercial grade detectors for high security application

• Multi-focus technology• Double conductive shielding• 3-step Lens angle adjustment

OPTEX Xwave Wireless Indoor Long Range PIR 862-01-CX-702RSC, 45x2.4m or 21x21m

OPTEX Wired Indoor Long Range PIR 862-01-CX-702C, 45x2.4m or 21x21m

Industrial or commercial applications where detection range trumps aesthetics. Warehouse / Factories.

OPTEX Xwave Wireless Indoor 360° PIR 862-01-WFX-360-1B, 12m 360° Ceiling Mount

OPTEX Wired Indoor 360° PIR 862-01-FX-360, 12m 360° Ceiling Mount

• Spherical Lens Design• Temperature compensation• Noise reduction circuit• Selectable Pulse Count: 2 or 4

Optimal coverage of large open areas, particularly in commercial or industrial applications

OPTEX Wired Indoor 360° High Mount PIR 862-01-SX-360Z, 18m 360° Ceiling Mount

• Circular detection area with 726 Dense zones• Multilevel detection pattern• Flexible pattern adjustment with Zoom function (Patent listed)• Up to 5 meter mounting height

High mount commercial with unsurpassed coverage

Detectors

• Quad zone logic with digital target recognition for small animal tolerance• Improved RF and white light immunity • Advanced temperature compensation logic• Improved RF and white light immunity

OPTEX Wireless Indoor PIR 862-01-WNX-40PI-T, 12x12m

Pleasing aesthetics and solid detection performance suitable for standard and indoor domestic and commercial installations, including those with small pets

• Quad zone logic with digital target recognition for small animal tolerance• Improved RF and white light immunity • Advanced temperature compensation logic• Improved RF and white light immunity

OPTEX Wired Compact Indoor PIR 862-01-RXC-ST, 12x12m862-01-RXC-DT-X5, 12x12m Dual-Tech

High performance with small animal immunity

• Selectable Dual-Purpose Spherical Fresnel Lens: Wide angle or long range• Patented Multi-Focus Lens• Selectable Multilevel & Pet Alley detection patterns• Selectable Pulse Count: 2 or 4

OPTEX Xwave Wireless Indoor PIR 862-01-EX-35RC, 11x11m or 17x1.7m

Highly stable internal detector providing either wide angle or long range flexibility and exceptional value

Prod

uct C

ode

Dete

ctor

Ran

ge

Dete

ctor

Typ

e

Indo

or

Outd

oor

Smal

l Pet

Tol

eran

t

Mou

ntin

g H

eigh

t

Activ

e IR

Mic

row

ave

Antim

ask

Batt

ery

type

Batt

ery

Quan

tity

Batt

erie

s su

pplie

d

Curr

ent s

tand

by

Curr

ent

tran

smitt

ing

Appr

oxim

ate

Batt

ery

Life

(50

tr

igge

rs p

er d

ay)

XWAVE TRANSMITTERS

860-07-587 Door contact

Xwave Wireless � CR123 1 � 13uA 10mA 2 yrs

860-07-588 Universal transmitter

Xwave Wireless 13uA 10mA

VXI OUTDOOR DETECTORS

862-01-VXI-R 12 x 12m Xwave Wireless � � 0.8 - 1.2m � 12uA 2 yrs

862-01-VXI-R-LC 12 x 12m Requires TX � � 0.8 - 1.2m AA 2 � 12uA 12mA

862-01-VXI-RAM 12 x 12m Xwave Wireless � � 0.8 - 1.2m � AA 2 � 13uA 12mA 2 yrs

862-01-VXI-RDAM-X5 12 x 12m Xwave Wireless � � 0.8 - 1.2m � � AA 2 � 21uA 15mA 2 yrs

862-01-VXI-ST 12 x 12m Wired � � 0.8 - 1.2m 20mA 2 yrs

862-01-VXI-AM 12 x 12m Wired � � 0.8 - 1.2m � 24mA 2 yrs

862-01-VXI-DAM-X5 12 x 12m Wired � � 0.8 - 1.2m � � 35mA 2 yrs

BX OUTDOOR DETECTORS

862-01-BX-80NRC 24m Xwave Wireless � � 0.8 - 1.2m AA 2 � 15uA 10mA 2 yrs

862-01-BX-80NRC-LC 24m Requires TX � � 0.8 - 1.2m 15mA

862-01-BX-80NC 24m Wired � � 0.8 - 1.2m 35mA 2 yrs

HX OUTDOOR DETECTORS

862-01-HX-40RAMC 12 x 12m Xwave Wireless � � 2.5 - 3.0m � CR123 3 � 33uA 11mA 2 yrs

862-01-HX-40RAMC-LC 12 x 12m Requires TX � � 2.5 - 3.0m � 33uA

862-01-HX-40C 12 x 12m Wired � � 2.5 - 3.0m 35mA 2 yrs

862-01-HX-40AMC 12 x 12m Wired � � 2.5 - 3.0m � 40mA 2 yrs

862-01-HX-80NRAM 25 x 2m Xwave Wireless � � 2.5 - 3.0m � CR123 3 � 30uA 11mA 2 yrs

862-01-HX-80NRAM-LC 25 x 2m Requires TX � � 2.5 - 3.0m � 30uA

862-01-HX-80NC 25 x 2m Wired � � 2.5 - 3.0m 35mA 2 yrs

862-01-HX-80NAMC 25 x 2m Wired � � 2.5 - 3.0m � 40mA 2 yrs

FIT OUTDOOR DETECTORS

862-01-FTN-R 5 x 1m Xwave Wireless � � 0.8 - 1.2m CR123 1 � 12uA 10mA 2 yrs

862-01-FTN-R-LC 5 x 1m Requires TX � � 0.8 - 1.2m 12uA

862-01-FTN-RAM 5 x 1m Xwave Wireless � � 0.8 - 1.2m � CR123 1 � 13uA 10mA 2 yrs

862-01-FTN-ST 5 x 1m Wired � � 0.8 - 1.2m 20mA 2 yrs

862-01-FTN-AM 5 x 1m Wired � � 0.8 - 1.2m � 20mA 2 yrs

Product Overview

Prod

uct C

ode

Dete

ctor

Ran

ge

Dete

ctor

Typ

e

Indo

or

Outd

oor

Smal

l Pet

Tol

eran

t

Mou

ntin

g H

eigh

t

Activ

e IR

Mic

row

ave

Antim

ask

Batt

ery

type

Batt

ery

Quan

tity

Batt

erie

s su

pplie

d

Curr

ent s

tand

by

Curr

ent

tran

smitt

ing

Appr

oxim

ate

Batt

ery

Life

(50

tr

igge

rs p

er d

ay)

LX OUTDOOR DETECTORS

862-01-LX-402C 12 x 15m Wired � Pet Ally 1.2 - 2.5m 25mA 2 yrs

862-01-LX-802NC 24 x 2m Wired � Pet Ally 1.2 - 2.5m 25mA 2 yrs

AX OUTDOOR BEAMS

862-01-AX-100TFRBEC 30m Xwave Wireless � � 0.8 - 1.2m � LSH20 4 623uA 10mA 3 yrs

862-01-AX-100TFRC-LC 30m Requires TX � � 0.8 - 1.2m � LSH20 4 623uA

862-01-AX-200TFRBEC 60m Xwave Wireless � � 0.8 - 1.2m � LSH20 4 810uA 10mA 3 yrs

862-01-AX-200TFRC-LC 60m Requires TX � � 0.8 - 1.2m � LSH20 4 810uA

862-01-SL-350QNRC 100m Xwave Wireless � � 0.8 - 1.2m � LSH20 4 810uA 10mA 3 yrs

862-01-SL-350QNRC-LC 100m Requries TX � � 0.8 - 1.2m � LSH20 4 810uA

862-01-AX-70TNC 40m Wired � � 0.8 - 1.2m � 38mA 3 yrs

862-01-AX-130TNC 40m Wired � � 0.8 - 1.2m � 41mA 3 yrs

OPTEX INDOOR DETECTORS

862-01-EX-35RC 11 x 11m17 x 1.7m

Xave Wireless � Pet

Ally 1.5 - 2.4m CR123 1 � 10uA 13mA 2 yrs

862-01-WNX-40PI-T 12 x 12m Xave Wireless � � 1.5 - 2.4m CR123 1 � 10uA 13mA 2 yrs

862-01-RXC-ST 12 x 12m Wired � � 1.8 - 2.4m 13mA 2 yrs

862-01-RXC-DT-X5 15 x 15m Wired � � 1.8 - 2.4m � 15mA 2 yrs

862-01-CDX-AM 15 x 15m Wired � � 1.8 - 2.4m � 17mA 2 yrs

862-01-CDX-DAM 15 x 15m Wired � � 1.8 - 2.4m � � 20mA 2 yrs

862-01-CDX-NAM 24 x 2m Wired � � 1.8 - 2.4m � 20mA 2 yrs

862-01-CDX-702RSC 45 x 2.4m21 x 21m

Xwave Wireless � Pet

Ally 1.5 x 3.6m CR123 2 � 10uA 10mA 2 yrs

862-01-CX-702C 45 x 2.4m21 x 21m Wired � Pet

Ally 1.5 x 3.6m 8mA 2 yrs

862-01-FX-360 12m Wired � 2.4 - 3.6m 17mA 2 yrs

862-01-WNX-360-1B 12m Xwave Wireless � 2.4 - 3.6m CR123 1 � 10uA 13mA 2 yrs

862-01-SX-360Z 18m Wired � 2.4 - 5.0m 13mA 2 yrs

Product Overview