a conventional combination sewer vacuum truck and the ......• Installed with conventional construction equipment • Available in several color options • Fast, economical installation

Sustainable Stormwater Solutions

®

Maintenance and RepairThe PaveDrain System is easy to maintain using industrial vacuuming equipment, if needed. If a significant amount of sediment accumulates in the aggregate bedding stone, PaveDrain is the only system that can be can be mechanically lifted out allowing for the subgrade to be cleaned and then the same mats re-installed. Repair of individual PaveDrain blocks can be accomplished without removing the (mat) cables. For more detailed information on these topics go to www.pavedrain.com and select Installation Guidelines, and then click onrepair.

• Initial installations show a drastic reduction in the use of deicing salts over traditional asphalt and concrete surfaces.

• Installed with conventional construction equipment• Available in several color options• Fast, economical installation of intersection construction or

retrofits of existing pavements• No seams to catch on snow plows• Available in multiple mat sizes for customized applications• Regional manufacturing supporting local economies• Adaptable to small areas where retention ponds are

not practical

Represented Locally By;

• CREDIT 6.1Stormwater Design, Rate & Quality Control: 1 Point Limit distribution of natural water flows by managing stormwater runo .

• CREDIT 6.2 Stormwater Treatment: 1 Point Implement a stormwater management planthat reduces impervious cover, promotes on-site filtration and eliminates contaminants.

• CREDIT 5.1Site Development: 1 PointProtect or restore habitat• CREDIT 7.1

Heat Island E ect, Non Roof: 1 Point Reduce heat islands

MATERIALS & RESOURCES:• CREDIT 5.2 Regional Materials: 1 Point

LEED Credits: Sustainable Sites

PaveDrain, LLCGlobal Water Center247 Freshwater Way Milwaukee, WI 53204(414) 423-6531 O cewww.pavedrain.com©2011 PaveDrain, LLC All Rights Reserved. PaveDrain System is a registered trademark of PaveDrain, LLC


®





not practical










®

Maintenance and RepairThe PaveDrain System is easy to maintain using industrial vacuuming equipment, if needed. If a significant amount of sediment accumulates in the aggregate bedding stone, PaveDrain is the only system that can be can be mechanically lifted out allowing for the subgrade to be cleaned and then the same mats re-installed. Repair of individual PaveDrain blocks can be accomplished without removing the (mat) cables. For more detailed information on these topics go to www.pavedrain.com and select Installation Guidelines, and then click on repair.




not practical









The PaveDrain System recommends an open joint concept between units. Existing installations have required little, ifany maintenance over multiple years. IF the joints become filled or obstructed, maintenance is accomplished by usinga conventional combination sewer vacuum truck and the PaveDrain Vac Head. If a significant amount of sedimentaccumulates in the aggregate bedding stone, PaveDrain can be removed allowing the subgrade to be cleaned and thenthe same product re-installed. Repair of individual PaveDrain blocks can be accomplished without removing the (mat)cables. For more detailed information on these topics go to www.pavedrain.com and select Installation & MAINTENANCEand then click on repair.


®





not practical









(888) 575-5339 Office


®





not practical









• Up to 5 LEED Credits: Sustainable Sites; Credit 6.1, 6.2, 5.1, 5.7 &Materials & Resources: Credit 5.1.

• Initial installations show a drastic reduction in the use of deicing saltsover traditional asphalt and concrete surfaces.

• Installed by hand or with conventional construction equipment in alltypes of weather for fast, economical installations.

• Available in multiple mat sizes for customized applications• Available in several color options• No seams to catch on steel snow plow blades.• Increased skid resistance over traditional pavements.• Solar Reflectance Index (SRI) range of 36 – 41 for lighter colored units.• Unlike traditional catch basins, varmints cannot enter drainage system.• Regional manufacturing supporting local economies.• Adaptable to small areas (retrofits) where retention ponds are

outdated or not practical.


®





not practical









The PaveDrain System is protected by the following U.S. and Canadian Patents; U.S. No. 8,251,607, No. D609,369, No. 8,366,343 & Canadian No. 133082. Additional patents pending.

Represented Locally By:

PaveDrain Vac Head


®





not practical










®

• Initial installations show a drastic reduction in the use ofdeicing salts over traditional asphalt and concrete surfaces.



not practical










®





not practical










®

Maintenance and Repairsing industrial

vacuuming equipment, if needed. If a significant amount of sediment accumulates in the aggregate bedding stone, PaveDrain is the only system that can be can be mechanically lifted out allowing for the subgrade to be cleaned and then the same mats re-installed. Repair of individual PaveDrain blocks can be accomplished without removing the (mat) cables. For more detailed information on these topics go to www.pavedrain.com and select Installation Guidelines, and then click on repair.




not practical









(888) 575-5339 Office


®





not practical















®





not practical











PaveDrain Vac Head

The PaveDrain system is designed as an open joint concept between the blocks. Existing installations have required little, if any maintenance over multiple years. If the joints become filled or obstructed, maintenance is accomplished by using a conventional combination sewer vacuum truck and the PaveDrain Vac Head. If a significant amount of sediment accumulates in the aggregate bedding stone, PaveDran can be removed allowing the subgrade to be cleaned and then the same product re-installed. Repair of individual PaveDrain blocks can be accomplished without removing the (mat) cables. For more detailed information on these topics go to www.pavedrain.com and select Installation & MAINTENANCE and then click REPAIR.

Structural and

The PaveDrain® System combines modern day functionality and a structural concept used for centuries to create the revolutionary permeable paving solution. PaveDrain incorporates a patented arch design in the middle of an articulating concrete block to create an internal storage chamber that can be filled with stormwater runo� while simultaneously providing strength for heavy vehicular loads. The PaveDrain System is designed to be a critical component of Low Impact Development (LID) allowing for the infiltration of stormwater runo�…onsite.

The PaveDrain System is a Permeable Articulating Concrete Block/Mat (P-ACB/M) that provides environmental benefits as a designated solution for compliance with local regulatory stormwater requirements. The durability and performance, in terms of life-cycle costs, make it the prudent alternative to all other paving surfaces. PaveDrain and its aggregate bedding stone is engineered to create a natural, vertical infiltration path, that recharges local groundwater all while using nature’s inherent ability to filter first flush pollutants. This allows for a reduction or elimination in stormwater infrastructure while minimizing the environmental impact. In addition to e�ectively managing stormwater runo� the PaveDrain System is also being developed using recycled materials which will make it one of the leading green technologies for stormwater management. PaveDrain works.

ASTM Standards & ADA Compliance The PaveDrain System meets the requirements of ASTM

D6684-04 and is recognized by the USEPA as a structural

Best Management Practice (BMP) for stormwater

infiltration. The Americans with Disabilities Act (ADA)

Design Guidelines require that surface openings shall

not exceed ½” and shall be firm, stable, and slip

resistant. The PaveDrain System easily exceeds all these

requirements by incorporating a 3/8” gap between

individual PaveDrain blocks.

Applications Parking Lots Alley Ways Low Speed Roadways Intersections

Emergency Access Lanes Residential Driveways

Why the PaveDrain System? As part of the Clean Water Act, the EPA

Elimination System (NPDES) to improve water quality by regulating point sources and non-pointsources that discharge pollutants into waters ofthe U.S.

6” - 12” bedding stone (thickness determined by engineer) Stone to be3/4” - 1” clean or recycled stone or concrete.

Approved geogrid or geotextile

PaveDrain System BlocksEnd View Cross Section

Storage Chamber - R3.34”

2.56”

11.75”

0.38”

5.65”

Natural SoilNatural Soil

Measurements

The PaveDrain System® was tested and documented by American Excelsior Company’s ErosionLab® to help better understand its infiltration capabilities. It was installed over two plots that contained an identical six inch aggregate bedding layer, but di�erentunderlying soils consisting of clay and sand. The plots were exposed to increasing simulated one hour duration rainfall events (i.e. 4”, 6” and 8”) until runo� was measured. View the entire ErosionLab report by visiting our website at www.pavedrain.com and go to How it Works.

PaveDrain System PropertiesThickness 5.65” (+ 1/8”)Unit Dimensions 11.75” x 11.75”Unit Weight 42-45 lbsUnits/SF 1 SF NominalPercentage Open Space: 3% Surface, 20% Storage Area

Installation DiagramBladensburg, Maryland demonstration testPasses HS-20 and H-20 load testing

Storage above the base!

PaveDrain System

The PaveDrain® system combines modern-day functionality with a structural concept used for centuries to create the revolutionary permeable paving solution. This system incorporates a patented arch design in the middle of an articulating concrete block to create an internal storage chamber that can be used as a reservoir for stormwater runoff, while simultaneously providing strength for heavy vehicular loads. The PaveDrain System is designed to be a critical component of Low Impact Development (LID) allowing for the infiltration of stormwater runoff.

The PaveDrain system is an aesthetically pleasing Permeable Articulating Concrete Block/Mat (P-ACB/M)1 that provides installation ease and flexibility to meet current and future stormwater management regulations. The PaveDrain system provides infiltration, storage, detention, conveyance and a paving surface all in one. When combined, these features allow for a reduction or elimination in stormwater infrastructure costs while minimizing environmental impact. The PaveDrain system works.1P-ACB/M is a registered certification mark of ECS Solutions, LLC

The PaveDrain system meets the requirements of ASTM D6684-04 and is recognized by the USEPA as a structural Best Management Practice (BMP) for stormwater infiltration. The Americans with Disabilities Act (ADA) Design Guidelines require that surface openings shall not exceed ½” and shall be firm, stable, and slip resistant. The PaveDrain System easily exceeds all these requirements by incorporating a 1/4” gap between individual PaveDrain blocks.

Parking LotsAlley WaysIntersections

Low Speed Roadways Emergency Access LanesResidential Driveways

The PaveDrain® system was tested inaccordance with ASTM C1701/C1701M-09by an independent third party engineeringfirm. The test was conducted on a PaveDrainproject that had not been maintained for 18months and still infiltrated in excess of 4,000inches/hour per one foot diameter.View the entire report by visiting our websiteat www.pavedrain.com and go to How itWorks and then Testing.

Thickness.......................................................................5.65” (+ 1/8”)Unit Dimensions......................................................12.00” x 12.00”Unit Weight..........................................................................45-49 lbsUnit..........................................................................1 Sq. Ft. NominalPercentage Open Space: 7% Surface, 20% Storage Area

12.00”

0.25”

Engineer approvedgeogrid or geotextile

Test #1 Test #2Inside Dia. of Infiltration Ring (in) 12.5 12.5Elapsed Time of Test (sec) 7.3 7.8Infiltration Rate (in/hr) (l=KM/(D2*t)) 4,449 4,163Avg. Infiltration Rate (in/hr) 4,306

Structural and

The PaveDrain® System combines modern day functionality and a structural concept used for centuries to create the revolutionary permeable pavingsolution. PaveDrain incorporates a patented arch design in the middle of an articulating concrete block to create an internal storage chamber that can be filled with stormwater runo� while simultaneously providingstrength for heavy vehicular loads. The PaveDrain System is designed to be a critical component of Low Impact Development (LID) allowing for the infiltration of stormwater runo�…onsite.

The PaveDrain System is a Permeable Articulating Concrete Block/Mat (P-ACB/M) that providesenvironmental benefits as a designated solutionfor compliance with local regulatory stormwaterrequirements. The durability and performance, in terms of life-cycle costs, make it the prudent alternative to all other paving surfaces. PaveDrain and its aggregate bedding stone is engineered to create a natural, vertical infiltration path, that recharges local groundwater all while using nature’s inherent ability to filter first flush pollutants. This allows for a reduction or eliminationin stormwater infrastructure while minimizing theenvironmental impact. In addition to e�ectivelymanaging stormwater runo� the PaveDrain System is also being developed using recycled materials which will make it one of the leading green technologies for stormwater management. PaveDrain works.

ASTM Standards & ADA ComplianceThe PaveDrain System meets the requirements of ASTM









ApplicationsParking LotsAlley WaysLow Speed RoadwaysIntersectionsEmergency Access LanesResidential Driveways

Why the PaveDrain System?As part of the Clean Water Act, the EPA developed the National Pollution DischargeElimination System (NPDES) to improve water quality by regulating point sources and non-pointsources that discharge pollutants into waters ofthe U.S.





2.56”

11.75”

0.38”

5.65”


Measurements





PaveDrain System

12.00”

Bladensburg, Maryland demonstration testPasses AASHTO HS-20 and H-20 load testingEach individual block is

interlocked by six (6) units

6” - 8” bedding stone(thickness determined by engineer).Stone to be 3/4” - 1” clean. No fines.

Why the PaveDrain System?As part of the Clean Water Act, the EPAdeveloped the National Pollution Discharge Elimination System (NPDES) to improve water quality by regulating point sources and non-point sources that discharge pollutants into waters of the U.S. PaveDrain captures and treats 100% of the surface water and allows you to route stormwater and control peak flows.

PaveDrain® System BlocksEnd View Cross Section

PaveDrain® System

PaveDrain® System Properties

Structural and

















2.56”

11.75”

0.38”

5.65”


Measurements

The PaveDrain System® was tested and documented by American Excelsior Company’s ErosionLab® to help better understand its infiltration capabilities. It was installed over two plots that contained an identical

plots were exposed to increasing simulated one hourduration rainfall events (i.e. 4”, 6” and 8”) until runo� was measured. View the entire ErosionLab report by visiting our website at www.pavedrain.com and go to How it Works.


Installation Diagram


The PaveDrain® system combines modern-day functionality with a structuralconcept used for centuries to create therevolutionary permeable paving solution.This system incorporates a patented arch design in the middle of an articulating concrete block to create an internal storage chamber that can be used as a reservoir for stormwater runoff, while simultaneouslyproviding strength for heavy vehicular loads. The PaveDrain System is designed to be a critical component of Low Impact Development (LID) allowing for theinfiltration of stormwater runoff.

The PaveDrain system is an aesthetically pleasing PermeableArticulating Concrete Block/Mat (P-ACB/M)1 that providesinstallation ease and flexibility to meet current and future stormwater managementregulations. The PaveDrain system providesinfiltration, storage, detention, conveyanceand a paving surface all in one. Whencombined, these features allow for a reductionor elimination in stormwater infrastructurecosts while minimizing environmental impact.The PaveDrain system works.1P-ACB/M is a registered certification mark of ECS Solutions, LLC

The PaveDrain system meets therequirements of ASTM D6684-04 and isrecognized by the USEPA as a structural BestManagement Practice (BMP) for stormwaterinfiltration. The Americans with DisabilitiesAct (ADA) Design Guidelines require thatsurface openings shall not exceed ½” andshall be firm, stable, and slip resistant. ThePaveDrain System easily exceeds all theserequirements by incorporating a 1/4” gapbetween individual PaveDrain blocks.


Low Speed RoadwaysEmergency Access LanesResidential Driveways

The PaveDrain® system was tested in accordance with ASTM C1701/C1701M-09 by an independent third party engineering firm. The test was conducted on a PaveDrain project that had not been maintained for 18 months and still infiltrated in excess of 2,000 inches/hour per one foot diameter.View the entire report by visiting our website at www.pavedrain.com and go to How itWorks and then Testing.


12.00”

0.25”



Structural and


















2.56”

11.75”

0.38”

5.65”


Measurements





PaveDrain System

12.00”

Passes AASHTO HS-25 Truck LoadingEach individual block is interlocked by six (6) units

Why the PaveDrain System?As part of the Clean Water Act, the EPS developed the National Pollution Discharge Elimination System (NPDES) to improve water quality by regulating point sources and non-point sources that discharge pollutants into waters of the U.S. PaveDrain captures and treats 100% of the surface water and allows you to route stormwater and control peak flows.



The PaveDrain® system was tested in accordance with ASTM C1701/C1701M-09 by an independent third party engineering firm. The tests were conducted on different PaveDrain installations that had not been maintained on an average of more than 2 years and still infiltrated in excess of 1,500 inches/hour per one foot diameter.

Test #1 Test #2Inside Dia. of Infiltration Ring (in)Elapsed Time of Test (sec)Infiltration Rate (in/hr) (l=KM/(D2*tr))Avg. Infiltration Rate (in/hr)

12.19 12.1920.9 21.951,630 1,560 1,595

PaveDrain End CapPaveDrain End Cap

Recommended biaxial geogrid PaveDrain® System

4”- 8” Minimum bedding stone compactedto no movement. Stone to be ¾” – 1”dia. clean, angular. No fines.(Thicker cross sections with larger, compacted angular stone TBD by engineer).

Structural and

The PaveDrain® System combines modern day functionality and a structural concept used for centuries to create the revolutionary permeable paving solution. PaveDrain incorporates a patented arch design in the middle of an articulating concrete block to create an internal storage chamber that can be filled with stormwater runo� while simultaneously providing strength for heavy vehicular loads. The PaveDrain System is designed to be a critical component of Low Impact Development (LID) allowing for the infiltration of stormwater runo�…onsite.

The PaveDrain System is a Permeable Articulating Concrete Block/Mat (P-ACB/M) that provides environmental benefits as a designated solution for compliance with local regulatory stormwater requirements. The durability and performance, in terms of life-cycle costs, make it the prudent alternative to all other paving surfaces. PaveDrain and its aggregate bedding stone is engineered to create a natural, vertical infiltration path, that recharges local groundwater all while using nature’s inherent ability to filter first flush pollutants. This allows for a reduction or elimination in stormwater infrastructure while minimizing the environmental impact. In addition to e�ectively managing stormwater runo� the PaveDrain System is also being developed using recycled materials which will make it one of the leading green technologies for stormwater management. PaveDrain works.











Why the PaveDrain System? As part of the Clean Water Act, the EPA

Elimination System (NPDES) to improve water quality by regulating point sources and non-pointsources that discharge pollutants into waters ofthe U.S.





2.56”

11.75”

0.38”

5.65”


Measurements





PaveDrain System

The PaveDrain® system combines modern-day functionality with a structural concept used for centuries to create the revolutionary permeable paving solution. This system incorporates a patented arch design in the middle of an articulating concrete block to create an internal storage chamber that can be used as a reservoir for stormwater runoff, while simultaneously providing strength for heavy vehicular loads. The PaveDrain System is designed to be a critical component of Low Impact Development (LID) allowing for the infiltration of stormwater runoff.

The PaveDrain system is an aesthetically pleasing Permeable Articulating Concrete Block/Mat (P-ACB/M)1 that provides installation ease and flexibility to meet current and future stormwater management regulations. The PaveDrain system provides infiltration, storage, detention, conveyance and a paving surface all in one. When combined, these features allow for a reduction or elimination in stormwater infrastructure costs while minimizing environmental impact. The PaveDrain system works.1P-ACB/M is a registered certification mark of ECS Solutions, LLC

The PaveDrain system meets the requirements of ASTM D6684-04 and is recognized by the USEPA as a structural Best Management Practice (BMP) for stormwater infiltration. The Americans with Disabilities Act (ADA) Design Guidelines require that surface openings shall not exceed ½” andshall be firm, stable, and slip resistant. The PaveDrain System easily exceeds all these requirements by incorporating a 1/4” gapbetween individual PaveDrain blocks.



The PaveDrain® system was tested inaccordance with ASTM C1701/C1701M-09by an independent third party engineeringfirm. The test was conducted on a PaveDrainproject that had not been maintained for 18months and still infiltrated in excess of 4,000inches/hour per one foot diameter.View the entire report by visiting our websiteat www.pavedrain.com and go to How itWorks and then Testing.


12.00”

0.25”



Structural and


















2.56”

11.75”

0.38”

5.65”


Measurements





PaveDrain System

12.00”

Bladensburg, Maryland demonstration testPasses AASHTO HS-20 and H-20 load testingEach individual block is

interlocked by six (6) units

6” - 8” bedding stone(thickness determined by engineer).Stone to be 3/4” - 1” clean. No fines.

Why the PaveDrain System?As part of the Clean Water Act, the EPAdeveloped the National Pollution Discharge Elimination System (NPDES) to improve water quality by regulating point sources and non-point sources that discharge pollutants into waters of the U.S. PaveDrain captures and treats 100% of the surface water and allows you to route stormwater and control peak flows.


PaveDrain® System


Structural and

















2.56”

11.75”

0.38”

5.65”


Measurements

The PaveDrain System® was tested and documented by American Excelsior Company’s ErosionLab® to help better understand its infiltration capabilities. It was installed over two plots that contained an identical

plots were exposed to increasing simulated one hourduration rainfall events (i.e. 4”, 6” and 8”) until runo� was measured. View the entire ErosionLab report by visiting our website at www.pavedrain.com and go to How it Works.


Installation Diagram


The PaveDrain® system combines modern-day functionality with a structuralconcept used for centuries to create therevolutionary permeable paving solution.This system incorporates a patented arch design in the middle of an articulating concrete block to create an internal storage chamber that can be used as a reservoir for stormwater runoff, while simultaneouslyproviding strength for heavy vehicular loads. The PaveDrain System is designed to be a critical component of Low Impact Development (LID) allowing for theinfiltration of stormwater runoff.

The PaveDrain system is an aesthetically pleasing PermeableArticulating Concrete Block/Mat (P-ACB/M)1 that providesinstallation ease and flexibility to meet current and future stormwater managementregulations. The PaveDrain system providesinfiltration, storage, detention, conveyanceand a paving surface all in one. Whencombined, these features allow for a reductionor elimination in stormwater infrastructurecosts while minimizing environmental impact.The PaveDrain system works.1P-ACB/M is a registered certification mark of ECS Solutions, LLC

The PaveDrain system meets therequirements of ASTM D6684-04 and isrecognized by the USEPA as a structural BestManagement Practice (BMP) for stormwaterinfiltration. The Americans with DisabilitiesAct (ADA) Design Guidelines require thatsurface openings shall not exceed ½” andshall be firm, stable, and slip resistant. ThePaveDrain System easily exceeds all theserequirements by incorporating a 1/4” gapbetween individual PaveDrain blocks.



The PaveDrain® system was tested in accordance with ASTM C1701/C1701M-09 by an independent third party engineering firm. The test was conducted on a PaveDrain project that had not been maintained for 18 months and still infiltrated in excess of 2,000 inches/hour per one foot diameter.View the entire report by visiting our website at www.pavedrain.com and go to How it Works and then Testing.


12.00”

0.25”

Engineer approved geogrid or geotextile


Structural and


















2.56”

11.75”

0.38”

5.65”


Measurements





PaveDrain System

12.00”

Passes AASHTO HS-25 Truck LoadingEach individual block is interlocked by six (6) units

Why the PaveDrain System?As part of the Clean Water Act, the EPS developed the National Pollution Discharge Elimination System (NPDES) to improve water quality by regulating point sources and non-point sources that discharge pollutants into waters of the U.S. PaveDrain captures and treats 100% of the surface water and allows you to route stormwater and control peak flows.



The PaveDrain® system was tested in accordance with ASTM C1701/C1701M-09 by an independent third party engineering firm. The tests were conducted on different PaveDrain installations that had not been maintained on an average of more than 2 years and still infiltrated in excess of 1,500 inches/hour per one foot diameter.

Test #1 Test #2Inside Dia. of Infiltration Ring (in)Elapsed Time of Test (sec)Infiltration Rate (in/hr) (l=KM/(D2*tr))Avg. Infiltration Rate (in/hr)

12.19 12.1920.9 21.951,630 1,560 1,595

PaveDrain End CapPaveDrain End Cap

Recommended biaxial geogrid PaveDrain® System

4”- 8” Minimum bedding stone compactedto no movement. Stone to be ¾” – 1”dia. clean, angular. No fines.(Thicker cross sections with larger, compacted angular stone TBD by engineer).


®





not practical










®





not practical










®





not practical









The PaveDrain System recommends an open joint concept between units. Existing installations have required little, ifany maintenance over multiple years. IF the joints become filled or obstructed, maintenance is accomplished by usinga conventional combination sewer vacuum truck and the PaveDrain Vac Head. If a significant amount of sedimentaccumulates in the aggregate bedding stone, PaveDrain can be removed allowing the subgrade to be cleaned and thenthe same product re-installed. Repair of individual PaveDrain blocks can be accomplished without removing the (mat)cables. For more detailed information on these topics go to www.pavedrain.com and select Installation & MAINTENANCEand then click on repair.


®





not practical









(888) 575-5339 Office


®





not practical















®





not practical











PaveDrain Vac Head


®





not practical










®

• Initial installations show a drastic reduction in the use ofdeicing salts over traditional asphalt and concrete surfaces.



not practical










®





not practical










®

Maintenance and Repairsing industrial

vacuuming equipment, if needed. If a significant amount of sediment accumulates in the aggregate bedding stone, PaveDrain is the only system that can be can be mechanically lifted out allowing for the subgrade to be cleaned and then the same mats re-installed. Repair of individual PaveDrain blocks can be accomplished without removing the (mat) cables. For more detailed information on these topics go to www.pavedrain.com and select Installation Guidelines, and then click on repair.




not practical









(888) 575-5339 Office


®





not practical









• Up to 5 LEED Credits: Sustainable Sites; Credit 6.1, 6.2, 5.1, 5.7 & Materials & Resources: Credit 5.1.


• Installed by hand or with conventional construction equipment in all types of weather for fast, economical installations.




®





not practical










PaveDrain Vac Head

The PaveDrain system is designed as an open joint concept between the blocks. Existing installations have required little, if any maintenance over multiple years. If the joints become filled or obstructed, maintenance is accomplished by using a conventional combination sewer vacuum truck and the PaveDrain Vac Head. If a significant amount of sediment accumulates in the aggregate bedding stone, PaveDran can be removed allowing the subgrade to be cleaned and then the same product re-installed. Repair of individual PaveDrain blocks can be accomplished without removing the (mat) cables. For more detailed information on these topics go to www.pavedrain.com and select Installation & MAINTENANCE and then click REPAIR.

Documents

a conventional combination sewer vacuum truck and the ......• Installed with conventional construction equipment • Available in several color options • Fast, economical installation