• Cistern/Tank Fittings • Pipe Fittings • Plumbing Brassware ......CONTENTS Washers & Seals 85HardwareCistern/Tank Fittings 91 Electrical 119Kitchen & Bathroom 539 Pipe Fittings

The Source of Quality British Plumbing Products

• Kitchen & Bathroom

• Cistern/Tank Fittings

• Pipe Fittings

• Plumbing Brassware

• Washers & Seals

• Hardware

• Electrical

2 [email protected] · www.cronexuk.com

WELCOME

Accredited to

Welcome to the latest edition of the Cronex Product Catalogue, which has been refreshed and updated to include our new and improved product ranges. We trust that you find the revised presentation and layout a helpful improvement, making it easier to use.

We are a proud member of the Thomas Dudley Group, who constantly invest in their people, plant and machinery and who are always striving to develop, manufacture and further improve both new and existing products, the results of which can be seen in this catalogue.

As a truly dedicated ‘Export Business’, the quality of our products and our customer service levels have always been our main priorities. We pride ourselves on being a helpful, efficient and resourceful team, who not only look after our customers specific needs but who also reach out towards building long standing relationships that truly assist in the growth and continued success of our customers’ businesses too.

When customers choose Cronex Plumbing, Hardware, Electrical and Ironmongery products, they do so with the reassurance of knowing that they have selected a dependable and experienced British-based supplier that has acquired the experience, knowledge and expertise to support them. With the dedication provided by our in-house sales office, overseas agents and technical support specialists, our team works proactively to resolve any issues that may occur both quickly and efficiently.

We have endeavoured to incorporate every product we supply and manufacture within the pages of this catalogue. However, if there is any specific item that you are unable to find, please do not hesitate to contact us for assistance.

May we take this opportunity to thank you for your continued support.

SALES: 0121 557 3433

SALES FAX: 0121 520 6369

EMAIL: [email protected]

HOW TO ORDER

Visit our website for updates and new product launches

www.cronexuk.com

WE OFFER

Part of the THOMAS DUDLEY GROUP

EXTENSIVE RANGE with over 5000 products in stock

FRIENDLY and KNOWLEDGEABLE sales team

WORLDWIDE distribution

MA

NU

FAC

TU

RING IN THE UK SINC

E 1961

Cronex is part of the Thomas Dudley Group of Companies

C O N T E N T S

Washers & Seals 85

Hardware 91

Electrical 119

Kitchen & Bathroom 5

Cistern/Tank Fittings 39

Pipe Fittings 61

Plumbing Brassware 77

Tel: 0121 557 3433 · Fax: 0121 520 6369 3


2016Acquisition of Cronexrabo by Thomas

Dudley Group meant Cronexrabo became the export trading division of Masefield-Beta (another member of

the Thomas Dudley Group).

1982Cronex Limited was launched offering automotive and

then later plumbing products

2020100 Years of

Thomas Dudley plumbing product

manufacturing

1997Rabo Merchants

successfully introduced Electrical

products into the range

1982Rabo Merchants was

launched offering predominantly

builders hardware

2000Cronex and Rabo Merchants

began to form a Co-operative Alignment, sharing market

information and Bi-lateral trading

2006Cronex and Rabo Merchants

formally merged to form Cronexrabo Limited, offering

Plumbing, Hardware and Electrical Products

2018Cronex and Masefield-Beta continue to supply UK and

export markets with products dovetailing and complimenting

one another

With a pedigree that stretches back almost 40 years, the team at Cronex have become known for their ability to manufacture and source quality products for the worldwide market. Since their humble beginnings where they offered only automotive spares and a limited hardware range, they have branched out and succeeded in other areas such as plumbing spares and electrical accessories to become a dominant force in the sectors in which they operate.Cronex was founded during the early 1980’s and was originally located in the ‘Heart of England’ in the picturesque setting of the English Cotswolds region. Initially, Its primary purpose was the export of automotive parts to the Caribbean. However, this soon gravitated towards supplying the retail plumbing sector.During the same period, and little further north in the West Midlands, Rabo Merchants was launched. They initially offered Merchanting and Confirming services, eventually evolving into the direct export of predominantly builder’s hardware goods.In 1997 Rabo Merchants successfully introduced Electrical Products into their core range offering, an effect which dramatically grew its business. Meanwhile, the Cronex brand was becoming a well-established name in its own right, with their plumbing and sanitary lines steadily increasing and customer relationships being built on firm foundations.The turn of the millennium brought the two companies closer together to form a co-perative trading alignment, sharing market intelligence and bi-lateral trading initiatives to the mutual benefit and success of both parties.

In 2006 CronexRabo Limited was born. After formally merging the two businesses, CronexRabo was able to offer an unprecedented selection of Plumbing, Hardware and Electrical products accompanied by a unified wealth of knowledge, expertise and experience in the export sector.

During the next 10 years, CronexRabo was able to build upon its reputation of supplying premium quality products ably backed by a strong sales and customer service team. They launched initiatives such as the ‘Carl & Gilbert’ Electrical Accessories range, ‘Curved Air’ fans and ‘Argent’ lighting and fittings, whilst still maximising sales in product areas such as Pan Connectors, Taps, Cistern Fittings, Brassware, Plumbing Spares and Ironmongery. Their reputation and reliability to supply these products in the Caribbean and West African markets enabled them to establish a strong and dedicated customer base which still proudly remains to this day.The year 2016 heralded the acquisition of CronexRabo by the Thomas Dudley Group. CronexRabo's Cotswold site was closed and relocated to the Tipton area in the West Midlands, with the business effectively becoming the export trading division of Masefield-Beta Limited, (another member of the Thomas Dudley Group). Prior to this transition, Masefield-Beta and CronexRabo already enjoyed a long-standing trading relationship, and the merger became a natural and positive step forward for both businesses. Masefield-Beta offers a strong and committed U.K. manufacturing base capable of producing and delivering a wide range of plumbing spares to complement and enhance the Cronex range.

Whilst our product portfolio continues to grow, the original Cronex core values remain the same…..namely to provide quality products, professional standards and excellent service at all times. Having recently embarked on a re-branding of their range, and thus returning the brand to the more prominently recognised ‘Cronex’ name, this, together with the expansion of the business into new territories across the world ensures the continued success of Cronex under the stewardship of the Thomas Dudley Group.

OUR HISTORYOUR HISTORY

1982 1997 2000 2006 2016 2018 2020

Tel: 0121 557 3433 · Fax: 0121 520 6369 5

Kitchen & Bathroom

Bathroom Accessories 26

Toilet Seats 35

Cistern Levers & Pulls 36

Taps 6

Pan Connectors 12

Kitchen Sinks 13

Wastes & Traps 18


Kitchen and Bathroom Products – Taps

TRUSTED BRITISH BRAND

RELIABLE PERFORMANCE

5 YEAR WARRANTY

SPARES AVAILABLE

CHROMECr

SINK

RESTYLE, RE-VAMP AND RESTORE

CXP 5348 Chrome screw down washered stem

CXP 5348/1 Spare chrome handle

CXP 5348/2 Spout

CXP 5348/3 Cartridge

CXP 5294 Washer 3/8”

Our mixer taps combine hot and cold water in one tap, creating more space around the sink while our standard pillar taps offer a classic finish and are available as wall mounted, high neck and standard.

Cronex combine both functionality and affordability, styled with a polished chrome finish and various handle types to compliment most styles of both kitchen and bathroom designs.

Accompanying our range of basin, sink and bidet taps we supply spare parts and tap heads, offering a convenient way of replacing and reviving your taps without affecting existing fittings.

with a range of classic and traditionally designed kitchen and bathroom taps from Cronex.

Heavy Duty Gooseneck Tap

CXP 5349 Chrome wall mounted

CXP 5349/1 Handle

CXP 5349/2 Spout


CXP 5294 Washer 3/8”

i Gooseneck taps allow containers & buckets to be filled with ease.

Tel: 0121 557 3433 · Fax: 0121 520 6369 7


SINK

Heavy Duty Gooseneck Tap

CXP 5358 Chrome, 1/4 turn stem

CXP 5358/1 Handle


CXP 5358/2 Spout

1 Hole Sink Mixer Tap

CXP 4673 Chrome, single lever control, swivel spout

CXP 4673/1 Handle


SINK

SINK

CXP 5353 Chrome, suitable for 7” or 8” hole centres

CXP 5353/A Cartridge

CXP 5353/C Handles (pair)

CXP 5353/S Swivel spout

CXP 5353/W Washer

Adjustable X-Head Sink Mixer Tap

SINK

Sink Mixer Tap

CXP 5357 Chrome, single hole, swivel spout

CXP5 357/1 Handles (pair)

CXP5 357/2 Spout

CXP5 357/3 Cartridge


CXP 5359 Chrome, high neck swivel spout

Wall Mounted Sink Mixer Tap

SINK SINK

Wall Mounted Bib Taps

CXP 5355 Chrome x-head handles

X-Head High Neck Sink Taps

CXP 5339 Chome x-head handles, high neck

CXP 5339/1 Handles (pair)


High Neck Sink Taps

CXP 5352 Chrome handles, high neck



PAIR

SINKSINKSINK

Adjustable Sink Mixer Tap

CXP 5347 Chrome, suitable for 7” or 8” hole centres


CXP 5347/2 Spout


PAIR PAIR


Tel: 0121 557 3433 · Fax: 0121 520 6369 9

CXP 5368 Chrome 7” Hole centres, swivel ‘dual flow’ spout

CXP 4672 Chrome, single lever, swivel spout

CXP 4672/1 Handle


Single Lever Sink Mixer Tap

Sink Mixer Tap

Sink Mixer Tap with Pull Out Spray

1 Hole Sink Mixer Tap

CXP 4678 Chrome plated brass 1 Hole, single lever sink mixer tap with cover plate.

CXP 4674 Chrome, single lever control, single hole mounting, swivel spout

SINK SINK

SINK SINK

SINK SINK

CXP 4675 8” Hole centres, chrome on heavy plastic body, swivel spout, 1/4 turn


CXP 4675/2 Spout


CXP 4676 8” Hole centres, chrome on brass body, swivel spout, 1/4 turn


CXP 4676/2 Spout


Kitchen Faucet

Economy Kitchen Faucet




1-Hole Basin Mixer Tap

CXP 5362 Chrome handles with push/spring waste

Self Closing Deck Mounted Tap

CXP 5361 Chrome, non concussive (self closing)

PAIR

BASIN BASIN

BASIN

BASIN

PAIRBasin Pillar Taps

BASIN

CXP 5350 Chrome handles, pillar

CXP 5350/1 Chrome handles (pair)


4” Economy Face Basin Faucet

CXP 4656 Chrome x-head handles, pillar



X-Head Basin Pillar Taps

CXP 4653 4” Hole centres, chrome on heavy plastic body, fixed spout, 1/4 turn



Tel: 0121 557 3433 · Fax: 0121 520 6369 11


CXP 4649 Chrome 4” Centres with pop-up waste, single lever operation

CXP 4649/1 Handle


1-Hole Bidet Mixer Tap

CXP 5392 Chrome, swivel spray, single lever operation with pop-up waste

1-Hole Basin Mixer Tap

Basin Mixer Tap

Basin Pillar Taps

CXP 4651 Chrome x-head handles 1/4 turn

CXP 4651/A Cartridge

CXP 4651/1 Handles

PAIR

BIDET

BASIN BASIN

BASIN BASIN

BASIN

Lavatory Face Basin Faucet

CXP 4648 Chrome 4” Centres, 1/4 turn operation


CXP 4648/3

Cartridge

Economy Basin Tap

CXP 4670 Chrome, with pop up waste, single lever operation



CXP 4652 4” Hole centres, chrome on brass body, swivel spout, 1/4 turn

CXP 4652/2 Spout



i Includes waste i Includes

waste

i Includes waste


Kitchen and Bathroom Products – Pan Connectors

StraightPan Connector

CXP 5042 White PVC

PACK QTY60 Offset

Pan Connector

CXP 5049 White PVC 20mm Offset

CXP 5049/1 White PVC 40mm Offset

PACK QTY60 14°

Pan Connector

CXP 5041 White PVC

PACK QTY50

H/O to ‘S’ Trap Pan Connector

CXP 5040 White PVC

PACK QTY25

PACK QTY25‘Swan

Neck’ Pan Connector

CXP 5050 Swan neck white PVC

‘Flexible’ Pan Connector

Pan ConnectorExtension

CXP 5037 White PVC, expandable 6.1/2” - 16”

CXP 5037/1 White PVC, expandable 5.1/2” - 12”

CXP 5037/2 White PVC, expandable 4” - 6”

PACK QTY30

PACK QTY40

CXP 5042/1 White PVC

i Space saver

Tel: 0121 557 3433 · Fax: 0121 520 6369 13

Kitchen and Bathroom Products – Kitchen Sinks

LH

HB

Supplied with left hand drainer

Includes centre half bowl

RH Supplied with right hand drainer

RV Reversable for left hand or right drainer

CXP 6606 900 x 500mm

Single Bowl Sink With Single Drainer

• Stainless steel - 304 grade• 18/10 guage• Anti-noise pads• Sit on type• Left hand drainer• Thickness: drainer 0.5mm, bowl 0.6mm

PACK QTY5

PACK QTY5

CXP 6607 900 x 500mm


• Stainless steel - 304 grade• 18/10 guage• Anti-noise pads• Sit on type• Right hand drainer• Thickness: drainer 0.5mm, bowl 0.6mm

i All sinks supplied complete with waste & overflow


9000mm

500mm

360mm

355mm

900mm

500mm

360mm

355mm

LH

RH

Due to their durable material and functional style, stainless steel sinks are a popular choice. Whether you require one bowl or two bowls, with or without a drainer, we offer various options to meet your needs.

Manufactured from Grade 304 steel which offers enhanced quality and corrosion resistance.


1000mm

500mm

360mm

355mm

1000mm

500mm

360mm

355mm

1500mm1500mm

500mm

440mm

355mm

CXP 6600 1000 x 500mm



PACK QTY5

PACK QTY5

PACK QTY5

CXP 6601 1000 x 500mm



CXP 6602 1500 x 500mm

Single Bowl Sink With Double Drainer

• Stainless steel - 304 grade• 18/10 guage• Anti-noise pads• Sit on type• Double drainer• Thickness: drainer 0.6mm, bowl 0.7mm





LH

RH

Tel: 0121 557 3433 · Fax: 0121 520 6369 15


CXP 6603 1500 x 500mm

Double Bowl Sink With Single Drainer


PACK QTY5

PACK QTY5

PACK QTY5

CXP 6604 1500 x 500mm

Double Bowl Sink With Single Drainer


CXP 6605 1800 x 500mm

Double Bowl Sink With Double Drainer

• Stainless steel - 304 grade• 18/10 guage• Anti-noise pads• Sit on type• Double drainer• Thickness: drainer 0.6mm, bowl 0.7mm


1500mm1500mm

500mm

440mm

355mm


1500mm1500mm

500mm

440mm

355mm


1500mm1800mm

500mm

440mm

355mm

LH

RH


CXP 6622 1000 x 500mm

Single Bowl Reversable Inset Sink With Single Drainer

• Stainless steel - 304 grade• Reversable for left or right hand drainer• Single tap hole for mixer tap• Includes tap hole stopper

PACK QTY5

PACK QTY5

PACK QTY5

CXP 6621 1000 x 500mm

Single Bowl Reversable Inset Sink with Single Drainer and Half Bowl

• Stainless steel - 304 grade• Reversable for left or right hand drainer• Single tap hole for mixer tap• Large bowl with basket strainer waste• Includes tap hole stopper

CXP 6620 1000 x 500mm

Double Bowl Inset Sink with Half Bowl

• Stainless steel - 304 grade• Single tap hole for mixer tap• 2.1/2 bowls• One basket strainer waste• Includes tap hole stopper




340mm500mm

1000mm

340mm

340mm500mm

1000mm

340mm

340mm500mm

1000mm

340mm 340mm


HB

RV

RV HB

Tel: 0121 557 3433 · Fax: 0121 520 6369 17

CXP 6623 15" x 15"

American Style Single Bowl Bar Sink

• Stainless steel bar sink• 2 tap holes• Waste included• Anti-noise underside coating• Sealing tape and clips

PACK QTY5

PACK QTY5

PACK QTY5

CXP 6624 25" x 22"

American Style Single Bowl Sink

• Stainless steel single bowl sink• 4 tap holes• Waste included• Anti-noise underside coating• Sealing tape and clips

CXP 6625 33" x 22"

American Style Double Bowl Sink

• Stainless steel double bowl sink• 4 tap holes• Waste included• Anti-noise underside coating• Sealing tape and clips

15”

15”

25”

22”

33”

22”

i All sinks supplied complete with waste





Kitchen and Bathroom Products – Waste & Traps

Sink Basket Strainer

MSIN-BS 1.1/2 “x 3.1/2” Stainless steel grid & flange, plastic body (CXP 5394)

CXP 5341 1.1/2” Combi plastic body with rectangular overflow and polyplug

Spring Push Brass Basin Waste

Fireclay Sink Waste

CXP 5333 1.1/2” Plastic un-slotted

CXP 5335 1.1/2” Brass slotted

CXP 5337 1.1/2” Brass un-slotted

1.1/2” Sink Waste & Rectangular Overflow

Sink Waste & Round Overflow

MSIN-CP 1.1/2 “ Combi plastic body with overflow and polyplug (CXP 5390)

CXP 5375 1.1/2” Combi brass body with overflow and polyplug brass

MSIN-BSO Stainless steel combi waste with round overflow (CXP 5388)

CXP 5393 Stainless steel combi waste with rectangular overflow

Sink Basket Strainer Waste With Overflow

MBAS-SSC 1.1/4” Brass, ‘spring-push’ plug slotted (CXP 5343)

MBAS-USC 1.1/4” Brass, ‘spring-push’ plug un-slotted (CXP 5342)

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

SINK SINK

SINK SINK

SINK BASIN

PACK QTY10

Tel: 0121 557 3433 · Fax: 0121 520 6369 19


Brass Vanity Combination Basin Waste

MBAS-CVC 1.1/4” Vanity combination, chrome plug and brass body (CXP 5383)

CXP 5385 Basin waste with capture plug

Plastic Basin Waste

Brass Basin Waste

CXP 5331 1.1/4” Un-slotted

CXP 5330 1.1/4” Slotted

CXP 5376 Round overflow

US Face Basin Waste

MBAS-SQC Slotted brass body (CXP 5384)

MBAS-USQL Un-slotted brass body

CXP 5370 1.1/4” Un-slotted

CXP 5371 1.1/4” Slotted

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

Slotted Basin Waste with CapturePlug

Square Clicker Basin Waste

BASIN BASIN

BASIN BASIN

BASIN BASIN


Brass Urinal Waste

MSURI-125CP 1.1/4” x 2.1/2” Flange, solid tall tail (CXP 5389)

MSURI-150CP 1.1/2” x 2.1/2” Flange, solid tall tail

Plastic Domed Urinal Waste

CXP 5369 1.1/4” Plastic flush flange

“Flipover” Basin Waste

“Mushroom” Brass Clicker Basin Waste

MBAS-SMC 1.114” Brass body slotted (CXP 5379)

MBAS-UMC

1.114” Brass body un-slotted (CXP 5380)

MFLU-125/2716 1.1/4” x 2.1/2" Flange, solid tall tail (CXP 5363)

MSURI-125PB 1.1/4” White fixed plastic domed waste (CXP 5369/P)

MSURI-150150PB 1.1/2” White fixed plastic domed waste (CXP 5367)

PACK QTY10

PACK QTY10

PACK QTY10


MBAS-SFC 1.114” Brass slotted (CXP 5381)

MBAS-UFC 1.114” Brass un-slotted (CXP 5382)

PACK QTY10

PACK QTY10

PACK QTY10Brass Flush Grated

UrinalWaste

Plastic Urinal Waste

FLUSH URINAL

BASIN BASIN

URINALFLUSH

i Stainless steel removable cover

Tel: 0121 557 3433 · Fax: 0121 520 6369 21

Bath Waste

CXP 5344 1.1/2” Brass body with “spring-push’ plug

Spring Clicker Combination Bath Waste

MBAT-CSC 1.1/2” Combi plastic body with spring clicker (CXP 5387)

MBAT-CPB 1.1/2” Combi plastic body with overflow and polyplug (CXP 5391)

MBAT-CP 1.1/2 “ Combi brass body with overflow and polyplug (CXP 5377)

MFLU-150/2780 1.1/2” X 2.7/8” Flange, brass body (CXP 5365)

MBAT-CPP 1.1/2” Combi plastic body with parking plug (CXP 5386)

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

Brass Flush Grated Waste


CXP 5373 1.1/2” Plastic body with polyplug

CXP 5374 1.1/2” Brass body with polyplug

Bath Waste & Overflow

Combination Bath Waste with“Parking Plug”

Brass Bath Waste

BATH BATH

BATH BATH

BATH FLUSH

PACK QTY10

i Removable octagonal centre



BASIN WASTE SEAL KITInstalling basin wastes has never been so easy!

QUICK AND EASY TO FIT

SAVES TIME AND MONEY

NO NEED FOR PAINT, PUTTY OR MASTIC

"Brilliant bit of kit! Not expensive and just does the job after trying most things to seal a slotted waste in bathroom."

" Fitted new basin in bathroom and no matter what I did I could not get it to seal up correctly and it kept leaking. Bought this seal kit and it fixed the issue straight away.”

Our Basin Waste Seal Kit is a handy way of sealing your old or new basin

waste. The kit is manufactured from high quality materials and includes a

sealing ring, washer and seating - everything you need for a quick and easy

installation. There’s no need for paint, putty or mastic!

The 3 part kit, includes foam washer, black rubber seal and plastic seating and is suitable for 1.1/4” basin wastes

Don’t just take our word for it...

"Easy to use and does a great job. No problem sealing the basin waste and no need to use sealant or mastic. Well worth the price. I would always use one when fitting a basin waste.”

“Brilliant result, no drips and no messy putty or sealant. Would recommend."

Fitting instructions

1. Fit foam washer as shown and push black rubber seal firmly into basin aperture

2. Fit plastic seating firmly over rubber seal ensuring even fit

3. Tighten nut to seal

SAY

GOODBYE

TO LEAKY

WASTES!

£

L90BWS125 32mm (1.1/4") Basin Waste Seal Kit (3 Part) on Header Card (CXP5340)

Tel: 0121 557 3433 · Fax: 0121 520 6369 23

Polythene Plugs & Triangle

CXP 5275 12” Ball chain

CXP 5238 1.1/2” Suits 1.1/4” waste

CXP 5239 1.3/4” Suits 1.1/2” waste

PACK QTY100

Chrome Basin Chain & Stay


PACK QTY25

Chrome Sink Strainer

Sink Strainer

CXH 21445 Rust free aluminium CXH 6075 Chrome flange

PACK QTY12

Supplied with locknut

Cistern Hole Stoppers

F0308B 475MM (10”) hook both ends (CXP 5279)

PACK QTY10Bath Ball

Chain

CXP 5266 Plastic, white complete with back nut

CXP 5267 Chrome complete with back nut

PACK QTY25Tap Hole

Stopper

CXP 5262 White to suit 1/2” hole

CXP 5263 Chrome to suit 1/2” hole

CXP 5261 White to suit 3/4” hole

PACK QTY25

PACK QTY25

PACK QTY10

PACK QTY12



MT3034AA 1.1/2” Plastic (CXP 5909)

Adjustable Bottle Trap



PACK QTY25

CXP 5932 1.1/4” Plastic


PACK QTY25

Plastic ‘S’ Trap



Supplied with ‘pull-up’ telescopic vertical waste tube to suit either basin (CXP5925) or sink (CXP5926) waste.

1.1/2” Water seal

Adjustable Bottle Trap Kit Includes waste, chain and horizontal pipe flange

‘P’ Trap1.1/2” Water seal

PACK QTY25

‘P’ Trap With Adjustable Inlet

PACK QTY25

3” Water seal

CXP 5925 1.1/4” - 3” Water seal, plastic

CXP 5926 1.1/2” - 3” Water seal, plastic

PACK QTY25

i Outlet supplied with a choice of 3 washers to suit various waste pipe sizes.

Tel: 0121 557 3433 · Fax: 0121 520 6369 25


PACK QTY20

CXP 5332 Flexible, extendable connectors 1.1/4”

CXP 5334 Flexible, extendable connectors 1.1/2”




Adjustable Bottle Trap

CXP 5930 1.1/4” Chrome

CXP 5931 1.1/2” Chrome

Chrome plated mazak, includes horizontal pipe and flange

Universal Flexible Waste Pipes Universal outlet connections. Mould to fit any shape. Length expands from 14” (31cm) to 38” (97cm)

Shallow TrapWashing Machine Trap

PACK QTY25

PACK QTY25

3” Water seal includes appliance spigot

3/4” Water seal, with cleaning eye

PACK QTY25


Kitchen and Bathroom Products – Bathroom Accessories

Toilet Roll Holders and Accessories

KL30TRH - AA White plastic spare roll (CXP 5464/W)

CXP 5457 Heavy pattern chrome

CXP 5458 Medium pattern,chrome

KL30TRH - AB Black, plastic, spare roll(CXP 5464)

CXP 5455 Locking, chrome, supplied with key

CXP 5460 Stainless steel, for domestic and commercial use

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

Toilet Brush & Holder PACK QTY

12

CXH 14545 White plastic

Tap Swops• Adjustable to fit most spindles• No plumbing required• Supplied complete with fixings

CXP 5351/M Metal replacement tap handles, pair

CXP 5351 Tap swops, replacement tap handles, pair

CXP 5351/X Replacement cross heads, pair

PACK QTY10

CXP 5449 Self loading toilet roll holder

PACK QTY10

Tel: 0121 557 3433 · Fax: 0121 520 6369 27


Soap Dishes

CXP 4687 Chrome basket soap dish

CXP 4688 Chrome basket corner soap dish

CXP 4687 Chrome rim soap dish with removable tray

Toothbrush Holder

CXP 5453 Chrome toothbrush holder

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

Towel Ring

CXP 5463 6" Diameter chrome ring

PACK QTY10

Shower Curtain

PACK QTY36

CXP 5493 White, 2100mm x 2100mm

CXP 5494 White, 1800mm x 1800mm

• 100% Polyester• Lead

weighted hem• Brass eyelets

Soap Dispensers

CXP 5447 Stainless steel, 1Ltr

CXP 5445 White wall mounted

PACK QTY10

PACK QTY10

Refillable


Chrome Grab Rails

CXP 4865 25mm dia. 305mm length (12") chrome plated (CXP 4865)



PACK QTY10

Stainless steel c/w concealed fixings

BBRAIL32305PS 32mm dia. 305mm length

CXP 4868 35mm dia.305mm (12") white(CXP 4868)

CXP 4869 35mm dia. 457mm (18") white(CXP 4869)

CXP 4870 35mm dia. 610mm (24") white(CXP 4870)

Concealed Grab Rails

CXP 4872 305mm length (12")




PACK QTY10Stainless Steel

Grab Rails

Plastic Grab Rails

PACK QTY10

• Strong ABS plastic

• Will not rust

• Concealed fixing

• Ribbed plastic for better grip

Flat End Economy Grab Rail

PACK QTY10

• White polyester

• Exposed fixing

CXP 4876 25mm dia. 305mm length (12")



Offset




Straight


PACK QTY10

Tel: 0121 557 3433 · Fax: 0121 520 6369 29

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

Chrome Straight Shower Rail• Chrome• Includes wall flanges

CXP 4891 5ft

CXP 4892 6ft

Chrome Brackets

CXP 5478 1" End bracket

CXP 5479 1/2" End bracket



CXP 5496 5/8" Centre bracket

CXP 5497 3/4" Centre bracket

CXP 5477 1" Centre bracket

Straight Rod Brackets• Chrome• Screw caps• Supplied in pairs

CXP 5256 1/2"

CXP 5257 5/8"

CXP 5258 3/4"

CXP 5259 1"

Cranked Rod Brackets• Chrome• Screw caps• Supplied in pairs

CXP 5252 1/2"

CXP 5253 5/8"

CXP 5254 3/4"

CXP 5255 1"

• Chrome• Supplied in pairs

• Chrome• Supplied individually

PACK QTY10Chrome Tubing

• Chrome• 4 metre lengths

CXP 5406 1/2” Chrome

CXP 5410 5/8” Chrome

CXP 5411 3/4 Chrome

CXP 5412 1” Chrome




Chrome Concealed Shower Valve

Traditional Concealed Shower Valve

CXP 5471 1/2" Chrome

CXP 5471/H Spare handle

CXP 5471/S Spare stem

CXP 5471/1 1/2" Chrome

CXP 5471/S Spare stemCXP 5470 Concealed mixer

valve

Bathtub & Shower Mixer Set

CXP 4680 Bathtub and mixer set

• Concealed single control valve with tub/shower diverter valve

• Ball jointed shower head with projection arm

• Tub spout

PACK QTY10

PACK QTY10

PACK QTY10Single

Control Shower Mixer Valve

Concealed Shower Set

CXP 4679 Concealed shower set

• Concealed shower mixer valve

• Projection arm

• Ball jointed shower head

Shower Projection Arm

PACK QTY10

CXP 5424 10" x 5" Drop

CXP 5425 5" x 5" Drop

1/2" x 1/2" Chrome tube, supplied with wall flange.

Tel: 0121 557 3433 · Fax: 0121 520 6369 31


Ball Jointed Shower Heads

CXP 4684 Chrome body CXP 4683 Chrome body CXP 5473 1/2" Chrome body

• Easy clean rubber jets• Adjustable spray

PACK QTY10

PACK QTY10

PACK QTY10

Shower Rose

CXP 5422 1/2" Inlet, 4" diameter CXP 5429 Swivel elbow and wall bracket

Shower Elbow & Bracket Kit

PACK QTY1

Shower Hose

CXP 5431 1/2" x 1/2" x 48"

CXP 5433 1/2" x 1/2" x 60"

CXP 5434 1/2" x 3/4" x 60"

PACK QTY10

PACK QTY10 Shower Handset

CXP 4682 1/2" Inlet, chrome

• Easy clean rubber jets

• Chrome

PACK QTY10



Bath Shower Mixers

CXP 5345 Bath shower mixer, complete with handset & hose

CXP 5402 Bath shower mixer, complete with handset & hose

CXP 5395/K Bath shower mixer, complete with rigid riser pipe wall clip and shower rose

Bath shower mixer taps mix hot and cold water to the chosen temperature whether filling a bath or having a shower.

Combining the functions of both tap and shower allows the user the best of both worlds. With minimal disruption to the bathroom appearance, bath shower mixers are a practical all in one option.

• Wall-mounted and deck-mounted options

• Chrome

• Suitable for Low and High Pressure Systems

• Round shower heads

• Traditional designs

• Coloured hot and cold handles.

Tel: 0121 557 3433 · Fax: 0121 520 6369 33


Shower Mixer (Bridge) Valve

CXP 5407 Wall mounted shower mixer (bridge) valve

Rigid Shower Riser Pipe

• Includes wall brackets and shower rose• Shaped tube• Chrome plated

CXP 5442 110cm height, 3/4" inlet x 1/2" outlet

Sliding Shower Rail Kit

CXP 4685 Chrome plated, includes soap dish, shower handset & hose



Urinal Support Brackets

KA1/U Stainless steel supplied in pairs (CXP 5019)

PACK QTY10

Basin/Urinal Wall Brackets

KA1/HD Stainless steel supplied in pairs (CXP 5020)

PACK QTY10

Cistern Brackets

CXP 5282 4" x 4" Pressed steel, supplied in pairs

PACK QTY25Towel Rail

Basin Bracket

CXP 5021 12" Cast iron, supplied in pairs

PACK QTY5

i Securely fix basins and urinals with our range of steel and cast iron brackets

KA1/G Pressed Steel supplied in pairs

KA1/X Basin Bracket

Basin Hanger Brackets PACK QTY

10

Undercounter Brackets PACK QTY

25

Tel: 0121 557 3433 · Fax: 0121 520 6369 35

Kitchen and Bathroom Products – Toilet Seats

PACK QTY5

PACK QTY5Heavy Duty

Toilet Seats

PACK QTY5

PACK QTY5

CXP 5025 White, economy, polypropolyne, adjustable hinges

CXP 5026 White, heavy pattern, adjustable hinges

CXP 5026/1 White, spare hinges (pair) CXP 5032 Black, heavy duty, polypropolyne,

adjustable hinges

CXP 5029 White, heavy duty, polypropolyne, adjustable hinges

CXP 5029/1 White, spare hinges (pair)

Plastic Toilet Seat Hinges

KDPP/AA White c/w rod, double position KDPP/AB Black c/w rod, double position

EconomyToilet Seat

Heavy Pattern Toilet Seat

i All HingesSuitable for resin, solid wood and MDF Toilet SeatsHigh QualityAdjustable to fit most seatsSupplied in pairs with universal seat fixing kit

PACK QTY5


Kitchen and Bathroom Products – Cistern Levers and Pulls

EC25M110M-RF Mahogany/chrome, 110mm spindle (CXP 5465/M)

EG25M110M-RF Mahogany/gold, 110mm spindle (CXP 5465/MG)

EC25M110L-RF Light oak/chrome, 110mm spindle

EG25M110L-RF Light oak/gold, 110mm spindle

Chrome Cistern Lever

Plastic Cistern Lever

Ceramic Cistern Lever

Wooden Cistern Levers

CXP 5465 1/2" Cistern lever

CXP 5461 3/8" Cistern lever (to suit Ideal Standards toilets)

PACK QTY10

PACK QTY10

EC25M110-RF Chrome, 110mm spindle (CXP 5465/H)

EG25M110-RF Gold, 110mm spindle (CXP 5465/HG)

CXP 4161 White plastic handle

EC25M110P-RF Pine/chrome, 110mm spindle (CXP 5465/N)

EG25M110P-RF Pine/gold, 110mm spindle (CXP 5465/NG)

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

1/2” BUSH

PLASTIC LIFT ARM

1/2” BUSH

Suitable for Ideal Standard cisterns with a smaller hole

3/8” BUSH

Suitable for most standard cisterns

PLASTIC LIFT ARM

BRASS LIFT ARM

Supplied with plastic multi purpose lift arm

Supplied with brass adjustable lift arm

PLASTIC LIFT ARM

3/8” BUSH

1/2” BUSH

PLASTIC LIFT ARM

1/2” BUSH

PLASTIC LIFT ARM

1/2” BUSH

PLASTIC LIFT ARM

1/2” BUSH

PLASTIC LIFT ARM

1/2” BUSH

PLASTIC LIFT ARM

Tel: 0121 557 3433 · Fax: 0121 520 6369 37

Kitchen and Bathroom Products – Cistern Levers and Pulls

Extended Cistern Lever

EC25J161-RF 160mm spindle (CXP 5465/A)

EC25J225-RF 225mm spindle (CXP 5465/C)

EC25J305-RF 305mm spindle (CXP 5465/B)

For concealed cisterns

PACK QTY10

PACK QTY10Plastic Lift Arm

CXP 5286 White plastic handle

ESP07DI Arm & bracket only (CXP 5079)

CXP 5079/1 Arm, bracket, wooden handle and chain

PACK QTY10High Level Lever

Assembly

Cistern Pull

EC27M110-RF

Chrome/ceramic 'Richmond' handle, oval, link and chain

H02CP05

Wooden handle mattress chain

PACK QTY10

PLASTIC LIFT ARM

3/8” BUSH

3/8” BUSH

BRASS LIFT ARM


01

23

45

67

89

1011

1213

1415

1617

1819

20 21

2223

2425

2627

2829

30CM

0 1 2 3 4 5 6INCH

HANDY MEASUREMENTSHANDY MEASUREMENTS

8mm

3/8" 1/2" 3/4" 1"

1 1/4" 1 1/2" 2"

10mm 15mm 22mm 28mm

What is the difference between female and male threads?

• The male threads screw into the female threads.• Male threads are on the outside, like a bolt. • Female threads are on the inside.

Tel: 0121 557 3433 · Fax: 0121 520 6369 39

Cistern / Tank Fittings

Syphons, Flushing Valves & Accessories 40

Ballvalves & Accessories 49

Brass ballvalves & Accessories 54

CC Kits & Spares 56

Flushpipes & Connectors 57

Wax Seals 58

Floats 59

[email protected] · www.cronexuk.com40

CISTERN FITTING KITS

Cistern / Tank Fittings – Syphons, Flush valves & Accessories

Our trusted British Cistern fitting kits can be supplied and used in most plastic

and ceramic cisterns. Fitting packs typically include our popular green Cronex

branded Syphon, the new and innovative Beta+ Ball Valve, Cistern Lever, Float

and relevant Washer, Flush Bend, Bracket, Connector or C/C Kit depending on

whether you require a Low Level, High Level or Close Coupled Kit.

Genuine British Thomas Dudley Fittings

Low Level Kit• 9 ½” Syphon

• Side Entry Ballvalve

• Cone Connector

• Straight Overflow

• Flush Bend

• Support Brackets

• 4 ½” Float

• Cistern Lever

• 9 ½” Syphon

• C/C Kit


• Cistern Lever

• Bottom Entry Ballvalve

• 4 ½” Float

• Sponge Washer

High Level Kit• 9 ½”Syphon

• Side Entry Ballvalve

• Cone Connector


• Flush Bend

• Support Brackets

• 4 ½” Float

• High Level Lever Assembly

CXP 5055 Close coupled kit

CXP 5051 High level kit

Close Coupled Kit

CXP 5052 Low level kit

Cronex Plastic Cisterns

CXP 5004 Low level, complete with Cronex cistern fittings

CXP 5023 High level, complete with Cronex cistern fittings


Genuine British Thomas Dudley Fittings

EXPOSED CISTERNSOur Cronex branded exposed plastic cisterns are UK manufactured by Thomas Dudley who have established an unrivalled track record in millions of installations.

The Cronex cistern is available in both low level and high level options and is ideal for use in light to medium, duty domestic and commercial applications.

FEATURES

• Traditional styling

• Cistern body made from high density polystyrene

• 6/7/9 litre convertible full flush

• Includes Cronex green syphon

• Side Inlet

• Suitable for high level, low level and close coupled installations

SPARES REDILY AVAILBLE

Spares readily available to help maximise the working life of every Cronex cistern.

498mm 186mm

95mm

295m

m

498mm 186mm

95mm

295m

m

Tel: 0121 557 3433 · Fax: 0121 520 6369 41


RECTANGULAR SYPHON

SIMPLE EASY FLUSH ADJUSTMENT


Cronex British made syphons are available in both 8” and 9 ½” height options and will fit most lever operated cisterns.

Supplied with a simple and convenient solution to convert to a 6ltr, 7ltr or 9ltr flush to ensure water saving options.

CXP 5069 9 1/2" Plastic, for use with external overflow

CXP 5066 8" Plastic, for use with external overflow

CXP 5233 Spare diaphragm

Ensure the cistern does not fill to a level which exceeds the fill line marked on the syphon

For a 7L Flush, remove only flush plug B

For a 9L Flush, leave flush plugs in place

For a 6L Flush, remove only flush plug A

i

A

B

C

IMPORTANT 6 Litre flushing should only be used with WC pans designed for a 6 litre flush volume. For non Cronex cisterns the above should be used as a guide only.

• British made

• Strong durable material

• Cronex branded

• Advanced water saving control for 6, 7, or 9 litre flush options

• Spare diaphragm available

2 Part Round Syphon

CXP 5068/1 9" 2-part round plastic syphon

CXP 5232 Spare diaphragm

CXP 5112 2-part rectangular plastic syphon

CXP 55112/D Spare diaphragm


S9 Hi-Flo Syphon

313553 9" Round syphon

2 Part Rectangular Syphon

Cronex Dual Flush Syphon

CXP 5066/D 8" Dual flush capability

i Removable pin allows for simple diaphragm replacement, without the need to detach the complete syphon from the cistern.

i Delivers water saving reduced flush when lever is held down and full flush when lever is depressed and released.

i Removable pin allows for simple diaphragm replacement, without the need to detach the complete syphon from the cistern.

• For high and low level use

• 38mm (1½") outlet

• One piece

• British made

• Strong durable material

• Cronex branded

• Advanced water saving

Tel: 0121 557 3433 · Fax: 0121 520 6369 43



L0345R 114mm (4.1/2") Round (CXP 5231)

L0350R 127mm (5.0") Round (CXP 5232)

Syphon Diaphragm - Round

Syphon Outlet Washers

L0201SR 50mm (2")(CXP 5110)

Jamb Nuts

Syphon Coupling Nuts

N01150AA 38mm (1.1/2") (CXP 5248)

CXP 5269 Medium 3"

CXP 5268 Large 4"

Syphon Diaphragm - Rectangular

CXP 5233 To suit CXP 5066 and CXP 5069

StainlessSteel ‘C’ Links

PACK QTY100

PACK QTY100

PACK QTY100

CXP 5234 13mm (1/2")

CXP 5235 19mm (3/4")

CXP 5230 25mm (1")

CXP 5236 32mm (1.1/4")

CXP 5237 38mm (1.1/2")

PACK QTY10

PACK QTY100

PACK QTY10

PACK QTY100

L0202SR 38mm (1.1/2")

Symphonic Air Extractor

CXP 5092 Plastic

PACK QTY10


Toilet Flush Valve

CXP 4552 Toilet flush valve

The flush valve is a replacement for the syphon. With easy installation and dual flush capabilities, the push button, connected by cable to the valves allows either for top or front mount positioning.

Flapper Valve

Spare Flapper

Tank Lever

CXP 5325 Plastic, whiteCXP 5326 Chrome

CXP 5301 Vinyl

PACK QTY10

PACK QTY10

PACK QTY12

i Easy adjustment and an ideal solution to most situations where replacement dual flush valves are required.

45Tel: 0121 557 3433 · Fax: 0121 520 6369


C0550B 1 gallon (5.1/2") flushing height, 1" BSPT (CXP 4804)





Size Part Code

Flushing Height approx

Dimension ‘A’

Thread ‘B’

1 C0550B 5.1/2" 182mm 1" BSPT (32.5mm)

2 C0625B 6.1/4" 197mm 1" BSPT (32.5mm)

3 C0750B 7.1/2" 233mm 1" BSPT (32.5mm)

4 C0825B 8.1/4" 242mm 1" BSPT (32.5mm)

5 C0925B 9.1/4" 268mm 1" BSPT (32.5mm)

Designed to cater for the varied flushing requirements of large and small urinal w.c. installations, all types conform to BS 1876.

Auto syphons are available in either of two outlet sizes: 25mm (1") and 32mm (1.1/4") BSPT.

All automatic syphons are supplied complete with two rubber washers and back nut. Each automatic syphon is fully tested before leaving the factory.


• UK manufactured

• Plastic

• Requires no electricity supply

• Designed for various flushing requirements of large and small urinal w.c installations

• Includes washers and back nuts

• Easily controlled to minimise water usage

AUTOMATIC URINAL SYPHONS

CXP 4801 Pipework kit for single bowl

CXP 4802 Pipework kit for 2 bowls

CXP 4803 Pipework kit for 3 bowls


Single Bowl Urinal

Urinal Cistern

CXP 5013 White bowl onlyCXP 5016 White ceramic,

2gals capacity.

Full Single Urinal Set

KIT A

Top Inlet Spreader

Back Inlet Spreader

1980mm

50mm

KIT B

Top Inlet Spreader

Back Inlet Spreader

1980mm

50mm

200mm

1220mm

700mm

KIT C

Top Inlet Spreader

Back Inlet Spreader

1980mm

50mm

700mm700mm 700mm700mm

Stainless Steel Pipework for Urinal Sets

CXP 5012 Bowl, cistern, spreader, pipework & wall brackets

KIT A

KIT B

KIT C

i NB

PIPEWORK ONLY

Supplied without urinal, cistern and separators. Complete sets available CXP5012

i 4 bowl pipework kit available, upon request

• Includes auto syphon

Tel: 0121 557 3433 · Fax: 0121 520 6369 47



• Adjustable flow control petcock. Suitable for use with automatic syphon

C15BCP Back inlet CP brass (CXP 4033) C15TCP Top inlet CP brass (CXP 4030)

Petcock

Urinal Spreader

Urinal Flush Valve

CXP 5017 Back inlet, CP brass push button

• For use with exposed pipework

PACK QTY10 Urinal Auto Flusher

CXP 5015 Chromed brass, battery operated

CXP 5018 Top inlet, CP brass, push button

• For use with concealed pipework

• For use with concealed pipework • For use with exposed pipework

Urinal Flush Valve

Urinal Spreader

CPC05AB 13mm (1/2") BSPT, plastic (CXP 4809)

Cistern / Tank Fittings – Ballvalves & Accessories

Toilet Tank Fill Valve and Diaphragm

• Prevents backflow

• Fast refill

• Valve height and water height adjust for accurate fit

Fully adjustable

CXP 5324 Bottom entry

CXP 5324/D Replacement diaphragm (carded)

CXP 5324/1 Replacement diaphragm (bulk)

PACK QTY25

Our Toilet tank fill valve is used to control the release of water in the cistern and designed to fill or release a large volume of water when activated by flushing the toilet. The Toilet fill valve then refills the tank and bowl to the correct water level after flushing. With its unique duel fitting adaptor this product is widely used and built to withstand years of flushes.

• Dual fitting toilet tank valve for 1/2" and 7/8" connection

• Easy Installation

• Silent operation

Dual fitting adaptor, converts 1/2" to 7/8"

Plastic tail float valve Brass tail float valve

Dudley Delay Fill Hydroflo Float Valves• To BS1212 part 4

• Equilibrium Quiet Filling

• Saves water by only opening once flushing is complete

• 1/2” Tail

324300 Side Inlet

324303 Adjustable Height 8” - 11.1/2” Bottom Inlet

324298 Side Inlet

324301 Adjustable Height 8”-11.1/2” Bottom Inlet

i For further information on water saving, see page 60

Tel: 0121 557 3433 · Fax: 0121 520 6369 49



Float Arm Adjusts from 6” to 10”

Additional Clip For Absolute Security

Left RightStandard

Unique, Patented Multi-Lateral Adjustment

Swivel adjustment allows the float to be fixed through

180 degrees

• Largest range of adjustment of any valve available and is simple to install.

• Valves can be used in most cisterns and set so it does not interfere with other cistern components.

• Designed and manufactured in the UK to BS1212.Made in the

UK3 Year

warranty*Patented

adjustment

WORLDS MOST ADJUSTABLE FLOAT VALVE


Beta+ Part 3 Float Valve

DBL701/C Side Inlet BS1212 Part 3 Float Valve DBL751/C Bottom Inlet BS1212 Part 3 Float Valve

DC02875PB-T Bottom Inlet Valve, 223mm (8.3/4") Height (CXP 5058)DC01625PS-T Side Inlet Valve (CXP 5084)

Delchem Float Valves

i AIR GAP AS STANDARDno need for double check valve

• To BS1212 part 3

• Float arm adjusts from 6” to 10”

• 1/2” plastic tail

• Robust 'Part 3' design


• 1/2" Plastic tail

i All valves are supplied with an adjustable float arm extendable 152mm (6") to 229mm (9")

PACK QTY25

PACK QTY25

PACK QTY25

PACK QTY25

Tel: 0121 557 3433 · Fax: 0121 520 6369 51


Torbeck Float Valves

DT01000S Side Inlet 1/2" plastic (CXP 5043)


• Equilibrium quiet filling

• 1/2” Plastic tail

DT02661B Bottom inlet, 1/2" platic telescopic (CXP 5044)

i One size covers all

i One size covers all


Dudley Hydroflo Float Valves• To BS1212 part 4

• Equilibrium Quiet Filling

• 1/2” Tail

• Available with brass or plastic tail

324299 Side Inlet, brass tail

324302 Bottom Inlet - Adjustable height 8"-11.1/2", brass tail

313079 Side Inlet, plastic tail

320714 Bottom Inlet - Adjustable Height 8" -11.1/2", plastic tail

i Brass tail

i Plastic tail

Ballvalve Pistons PACK QTY10

Ballvalve Seatings

CXP 56711/2" x 1/8" High pressure

PACK QTY100

CXP 56723/4" x 1/4" High pressure

CXP 56743/4" x 1/2" Low pressure

CXP 56731" x 3/8" High pressure

L11PHP50 13mm (1/2") High Pressure (CXP 5680)

L11PHP7522mm (3/4") High Pressure (CXP 5681)

L11LPS381/2" x 3/8" Low Pressure

L11MPS3161/2" x 3/16" Medium Pressure


Anti-Syphon Ballcock

CXP 5323 Includes float rod, tube and float

PACK QTY10

Tel: 0121 557 3433 · Fax: 0121 520 6369 53


Cistern / Tank Fittings – Brass Ballvalves & Accessories

BS1212 Side Inlet Brass Ballvalve - Part 1

DBL101A 1/2" Side inlet high pressure (CXP 5606)

DBL305 3/4" Side inlet high pressure (CXP 5607)

DBL141 1" Side inlet high pressure (CXP 5609)

All brass float operated ballvalves are supplied with removable seat and come as standard with a nylon seat and backnuts.*

Recommended float use: 1/2" inlet – 4.1/2" with 5/16" Thread 3/4" inlet – 6" with 5/16" Thread *except for larger size ballvalves.

Part 1 Diagram

DBL171 1.1/2" Side inlet high pressure (CXP 5610)

DBL181 2" Side inlet high pressure (CXP 5611)

• Supplied with removable seat and brass backnuts

All Beta brass float operated ballvalves are supplied with removable seat and come as standard with a nylon seat and backnuts. Top discharge. Adjustable float connection on drop lever.

Recommended float use: 1/2" inlet – 4.1/2" with 5/16" Thread; 3/4" inlet – 6" with 5/16" Thread

Temperature for ballvalves (NB not constant use): Standard Nylon Seat supplied 60°; Bronze Seats 80°

Part 2 Diagram

BS1212 Side Inlet Brass Ballvalve - Part 2

DBL201A 1/2" Side inlet high pressure (CXP 5612)

CXP 5613 3/4" Side inlet high pressure

PACK QTY10

PACK QTY10

PACK QTY10

i Our Brass Ballvalves forms part of our range of manual valves and tank fittings and is used widely in general services, water treatment and plumbing and heating applications, controlling the level of water into water tanks and cisterns.

We offer a wide range of sizes from ½” to 2” along with the appropriate plastic or copper floats (supplied separately).

Where required our valves carry WRAS approved ratings, thus ensuring both product reliability and integrity

Cistern / Tank Fittings – Brass Ballvalves & Accessories

BS1212 Bottom Inlet Brass Ballvalve

DBL119 1/2" High pressure bottom inlet 275mm height(CXP 5608)

PACK QTY10 MOH Side Inlet

Brass Ballvalve

DBL101MOH 1/2", 12" Arm length (CXP 5600)

DBL305MOH 3/4", 13" Arm length (CXP 5601)

CXP 5602 1" 13" Arm length

CXP 5603 1.1/4", 15" Arm length

CXP 5604 1.1/2", 15" Arm length

CXP 5605 2", 16" Arm length

One piece brass body with integral tail. Export use only.

REF DBL101A DBL305 DBL141 DBL161 DBL171 DBL181

BSP 1/2" 3/4" 1" 1.1/4" 1.1/2" 2"

A 4.1/2" 6" 8" 10" 10" 12"

B 5/16" BSW 5/16" BSW 7/16" BSW 9/16" BSW 9/16" BSW 5/8" BSW

C 8.3/4" 13" 16" 22" 22" 29"

D* 390mm 555mm 670mm 890mm 890mm 1170mm

E* 23mm 34mm 41.3mm 57.2mm 57.2mm 76.2mm

F* 235mm 65mm 290mm 425mm 425mm 540mm

G* 80mm 85mm 140mm 185mm 185mm 210mm

H* 41mm 43mm 52mm 62mm 62mm 70mm

BS1212 Ballvalves

ABC

D

E

H

PACK QTY10

Tel: 0121 557 3433 · Fax: 0121 520 6369 55


Cistern / Tank Fittings – CC Kits & Spares

• Supplied with nuts, bolts and washers

• Close coupling kits are the perfect solution for securing a close coupled cistern to a close coupled pan. The Cronex kit contains everything needed for a secure watertight connection for your toilet, including a high quality rubber doughnut washer and strong metal cranked plate

AE552CC Nut, bolt and washers (pair to suit close coupling kit) (CXP 5683/A)

Close Coupling Kit

AE599CC Doughnut washer, 1.1/2" outlet (CXP 5683)

1.1/2" Cranked Plate

Dimension ‘A’ 184.8mm

Dimension ‘B’ 103.5mm

Dimension ‘C’ 61mm

PACK QTY10

CXP 5685 90° plastic

Overflows

CXP 5687 Bottom entry, plastic

CXP 5686 Straight, plastic

PACK QTY25

PACK QTY25

PACK QTY10

DIM “A” 184.8mm

DIM “B” 92.5mm

DIM “C” 55.5mm

Close Coupling Kit Washers

L06CC Doughnut washer (CXP 5684/P)

CXP 5684 Stepped washer

L06CC-W Foam washer (CXP 5692)

L06CC-IS Ideal Standard Ring (CXP 5684/I)

Cistern / Tank Fittings – Flushpipes & Connectors

High Level Flushpipes

AO26OAA PVC high level flush pipe, white, 2 piece 5'0" pan to cisten height (CXP 5089)

AO266FAA PVC high level flush pipe, white, 4 piece 5'6" pan to cisten height (CXP 5087) CXP 5077 Rubber

Internal Cone Connector

CXP 5088 Plastic

Tapered P.V.C RingFlexible Tapered PVC Sealing Rings for sealing flushpipes or flushbends to syphon

L02007S 38mm (1.1/2") Seal ring only (CXP 5074/R)

Low Level Flushpipes• Low level flushbends manufactured

from high quality white PVC, consisting of a 90 degree one piece swept bend with 38mm diameter

• Supplied with a tapered sealing ring

A101409AA 14" x 9" includes sealing ring (CXP 5074)

• High level 2 piece backwall flushpipe, manufactured from top quality white PVC

• Supplied with fitting 45mm flange

PACK QTY10

PACK QTY10

Tel: 0121 557 3433 · Fax: 0121 520 6369 57


Cistern / Tank Fittings – Wax Seals

Wax Seal Kits

Toilet Tank Seal Ring Toilet Flange

CXP 6006 2" Rubber with tank-to-bowl zinc plated bolts

CXP 6008 Toilet flange (with screws) 175mm, diameter, 10mm

PACK QTY50

i New innovative product

CXP 6001 Wax seal kit with flange

CXP 6002 Wax seal kit with flange

PACK QTY60

PACK QTY60

• Fits a 4" waste pipe

Wax seal kits are used as a permanent leak proof seal, designed not to crack or harden and resistant to odour’s, gasses, vermin and acid. These clever products are understated but a useful and popular plumbing item when repairing, replacing and fitting floor outlet toilet bowls.

• Fits both 3" & 4" waste outlets

• Complete with sleeve which extends the discharge opening to create a stronger seal and assists correct bowl alignment

Cistern / Tank Fittings – Floats

Copper Floats to BS1968

Soldered - Cold water only

Plastic Ball Floats

D45BTOR-EL114mm (4.1/2") Dia. Elongated (CXP 5056) 5/16" Brass Thread

D45PTOR-Q114mm (4.1/2") Dia. Qualifloat (For Use In Hot Or Cold Water To BS2456) 5/16" Plastic Thread

D45BTOR114mm (4.1/2") Dia. (CXP 5630/B) 5/16" Brass Thread

D30BTOR76mm (3") Dia. For Export Market Only (CXP 5629) 5/16" Brass Thread

D50BTOR127mm (5") Dia. (CXP 5631) 5/16" Brass Thread


D60BTOR/38153mm (6") Dia. 3/8" Brass Thread




D1045 4.1/2" x 5/16" BSW Stud (CXP 5640)

D1050 5" x 5/16" BSW Stud (CXP 5641)

D1055 5.1/2” x 3/8” BSW Stud

D1060 6" x 5/16" BSW Stud (CXP 5642)

D1060A 6” x 3/8” BSW Stud

D1070 7" x 5/16" BSW Stud (CXP 5643)

D1080 8" x 7/16" BSW Stud (CXP 5644)

D1080A 8” x 3/8” BSW Stud

D1100 10" x 9/16" BSW Stud (CXP 5645)

D1120 12" x 5/8" BSW Stud (CXP 5646)

D1120A 12” x 9/16” BSW Stud

D1140 14" x 3/4" BSW Stud (CXP 5647)

D1150 15" x 3/4" BSW Stud (CXP 5648)

D1160 16" x 7/8" BSW Stud (CXP 5649)

PACK QTY10

Tel: 0121 557 3433 · Fax: 0121 520 6369 59


USES

• Designed for use as a replacement in most plastic and ceramic exposed and concealed cisterns.

FEATURES

• Compact body, float arm and float.

• Silence tube for quiet after flush filling.

• Unique key for simple and safe removal of the filter.

• Unique float arm makes it impossible for the float to become detached.

• Two built in backflow prevention devices for one of the safest valves available.

• WRAS approved.

WATER-SAVING

• Delay fill models save water and support BREEAM by only allowing a cistern to start refilling once flushing is complete.

OPTIONS

• Side, bottom and telescopic bottom inlet.

• Brass tails to help prevent cross-threading.

• Delay fill facility.

NEW SIDE INLET DELAY FILL

324300

NEW SIDE INLET DELAY FILL BRASS TAIL

324298

48mm

73mm

SilenceTube

203m

m (8

”) -

292m

m (1

1½”)

Tele

scop

ic -

203m

m (8

”) -

292m

m (1

1½”)

BOTTOM INLET STANDARD, DELAY FILL & BRASS TAIL

38mm

5.75mm

87mm

SilenceTube

SIDE INLET DELAY FILL & BRASS TAIL

NEW TELESCOPIC BOTTOM INLET DELAY FILL

324303

NEW TELESCOPIC BOTTOM INLET DELAY FILL BRASS TAIL

324301

WATER SAVINGThomas Dudley is committed to manufacturing bathroom and washroom solutions that help to save water, energy and money.

We have supported the European Water Label since its inception and have over 500 Dudley products registered under the water saving scheme. These include our Vantage and Miniflo concealed cisterns which offer water-saving options of 6/4, 5/3 and 4/2.6 litre dualflush.

Our Turbo 88 syphons and Niagara flushing valves are registered on the Water Technology List which offers enhanced capital allowance incentives when businesses decide to fit them.

Applicable to Delay Fill

models only RECOMMENDED

Water LabelUni�ed

Tel: 0121 557 3433 · Fax: 0121 520 6369 61

Pipe Fittings

Compression 62

Brass - Chrome

End Feed 66

Solder Ring 69

Threaded 72

Consumables 74

Pipe Clips 75


Pipe Fittings – Compression - Brass

Couplers MI (K3)

Couplers FI (K2)

Repair Couplers

BBZ1150 15mm x 10mm(CXP 5713)

BBZ1151 15mm x 12mm(CXP 5714)

BBZ1152 22mm x 15mm(CXP 5715)

BBZ1153 28mm x 22mm(CXP 5716)

BBZ1062 15mm x 1/4"

BBZ1063 15mm x 3/8"

BBZ1050 15mm x 1/2"(CXP 5780)

BBZ1052 15mm x 3/4"(CXP 5782)

BBZ1064 22mm x 1/2"

BBZ1053 22mm x 3/4"(CXP 5783)

BBZ1054 22mm x 1"(CXP 5787)

BBZ1055 28mm x 1"(CXP 5785)

BBZ1056 35mm x 1.1/4"(CXP 5788)

BBZ1057 42mm x 1.1/2"(CXP 5784)

BBZ1058 54mm x 2"(CXP 5786)

BBZ1112 15mm x 1/4"

BBZ1113 15mm x 3/8"

BBZ1100 15mm x 1/2"(CXP 5770)

BBZ1102 15mm x 3/4" CXP 5773)

BBZ1114 22mm x 1/2"

BBZ1103 22mm x 3/4"(CXP 5771)

BBZ1108 22mm x 1"

BBZ1104 28mm x 1"(CXP 5774)

BBZ1105 35mm x 1.1/4"(CXP 5775)

BBZ1106 42mm x 1.1/2"(CXP 5776)

BBZ1107 54mm x 2"(CXP 5777)

BBZ1900 15mm x 15mm x 82mm

BBZ1250 10mm (CXP 5762)

BBZ1251 12mm (CXP 5763)

BBZ1253 15mm (CXP 5760)

BBZ1255 22mm (CXP 5761)

BBZ1257 28mm (CXP 5767)

BBZ1258 35mm (CXP 5768)

BBZ1259 42mm (CXP 5769)

BBZ1260 54mm (CXP 5759)

Reducing Couplers

BBZ1020 15mm

BBZ1021 22mm

Slip Couplers

Straight Couplers (K1)

BBZ1001 10mm (CXP 5737)

BBZ1002 12mm (CXP 5738)

BBZ1004 15mm (CXP 5740)

BBZ1006 22mm (CXP 5741)

BBZ1008 28mm (CXP 5742)

BBZ1009 35mm (CXP 5745)

BBZ1010 42mm (CXP 5746)

BBZ1011 54mm (CXP 5747)

Equal Elbows (K26)

i COMPRESSION – with minimal tools required, compression fittings are easy to fit and are widely used to connect both plastic and copper. Simply slide the nut onto the pipe, add the compression ring, inert the pipe into the fitting and tighten the nut. This will give a watertight seal as the nut compresses against the pipe.


Elbows FI (K28)

BBZ1350 15mm x 1/2"(CXP 5750)

BBZ1352 22mm x 3/4"(CXP 5751)

BBZ1353 22mm x 1" (CXP 5753)

BBZ1355 28mm x 1"(CXP 5755)

BBZ1356 35mm x 1.1/4"(CXP 5765)

BBZ1357 42mm x 1.1/2"(CXP 5757)

BBZ1358 54mm x 2"(CXP 5758)

Elbows MI

BBZ1300 15mm x 1/2" (CXP 5790)

CXP 5792 15mm x 3/4"

BBZ1302 22mm x 3/4"

BBZ1303 22mm x 1"(CXP 5793)

BBZ1304 28mm x 1"(CXP 5794)

BBZ1305 35mm x 1 1/4"

BBZ1306 42mm x 1 1/2"

BBZ1307 54mm x 2"

Reducing Elbow

BBZ1261 22mm x 15mm

Wallplate Elbows

BBZ1800 15mm x 1/2"(CXP 5797)

BBZ1802 22mm x 3/4"(CXP 5799)

Tank Connectors

BBZ1750 15mm (CXP 5802)

BBZ1751 22mm (CXP 5803)

BBZ1752 28mm (CXP 5804)

BBZ1753 35mm (CXP 5805)

BBZ1754 42mm (CXP 5806)

BBZ1755 54mm (CXP 5807)

Stop Ends

BBZ1600 15mm (CXP 5812)

BBZ1602 22mm (CXP 5814)

BBZ1603 28mm (CXP 5815)

BBZ1604 35mm (CXP 5816)

BBZ1605 42mm

BBZ1606 54mm

Tap Connectors

BBZ1700 15mm x 1/2" Bent(CXP 5725)

BBZ1705 15mm x 1/2" Straight (CXP 5726)

BBZ1706 22mm x 3/4" Straight (CXP 5727)

Compression Nuts

BBZ1580 15mm Brass

BBZ1582 22mm Brass

Tel: 0121 557 3433 · Fax: 0121 520 6369 63



Copper Olives

BBZ1550C 10mm

BBZ1551C 12mm

BBZ1552C 15mm

BBZ1553C 22mm

BBZ1554C 28mm

BBZ1555C 35mm

BBZ1556C 42mm

BBZ1559C 54mm3 Parts Reducers

BBZ1206 15mm x 12mm

BBZ1200 22mm x 15mm(CXP 5820)

BBZ1201 28mm x 22mm(CXP 5821)

CXP 5822 28mm x 15mm






Brass Olives

BBZ1550B 10mm (CXP 5830)

BBZ1551B 12mm (CXP 5831)

BBZ1552B 15mm (CXP 5832)

BBZ1553B 22mm (CXP 5833)

BBZ1554B 28mm (CXP 5834)

BBZ1555B 35mm (CXP 5835)

BBZ1556B 42mm (CXP 5836)

BBZ1558B 20mm

BBZ1557B 25mm

BBZ1560B 3/4"1 Part Reducers

BBZ1207 22mm x 15mm

BBZ1202 28mm x 15mm

Unequal Tees

BBZ1450 15mm x 15mm x 22mm (CXP 5700)

BBZ1451 22mm x 15mm x 15mm (CXP 5701)

BBZ1452 22mm x 15mm x 22mm (CXP 5702)

BBZ1453 22mm x 22mm x 15mm (CXP 5703)

BBZ1454 28mm x 28mm x 15mm (CXP 5704)

BBZ1455 28mm x 28mm x 22mm (CXP 5705)

BBZ1458 28mm x 22mm x 22mm (CXP 5707)

CXP 5706 28mm x 15mm x 28mm

Reducing Tees FI (K17)

Equal Tees (K12)

BBZ1400 10mm (CXP 5729)

BBZ1401 15mm (CXP 5730)

BBZ1403 22mm (CXP 5731)

BBZ1405 28mm (CXP 5734)

BBZ1406 35mm (CXP 5735)

BBZ1407 42mm (CXP 5736)

BBZ1408 54mm (CXP 5728)

BBZ1500 15mm x 15mmx 1/2" (CXP 5720)

BBZ1501 22mm x 22mmx 1/2" (CXP 5721)

i For copper pipe and fitting products see page 74

Pipe Fittings – Compression - Chrome

Couplers – Chrome Plated

Couplers FI – Chrome Plated

Couplers MI – Chrome Plated Elbows FI –

Chrome Plated

Equal Tees – Chrome Plated

Stop Ends – Chrome Plated

Wallplate Elbows – Chrome Plated

BBZ1051 15mm x 1/2" (CXP 5781)

BBZ1101 15mm x 1/2"(CXP 5772)

Equal Elbows – Chrome Plated

BBZ1252 12mm (CXP 5764)

BBZ1254 15mm (CXP 5765)

BBZ1256 22mm (CXP 5766)

BBZ1351 15mm x 1/2" CXP 5752)

BBZ1354 22mm x 1"(CXP 5754)

BBZ1003 12mm (CXP 5739)

BBZ1005 15mm (CXP 5743)

BBZ1007 22mm (CXP 5744)

Elbows MI – Chrome Plated

BBZ1301 15mm x 1/2" (CXP 5791)

BBZ1402 15mm (CXP 5732)

BBZ1404 22mm (CXP 5733)

BBZ1601 15mm (CXP 5813)

BBZ1609 22mm

BBZ1801 15mm x 1/2" (CXP 5798)

Compression Nuts – Chrome Plated

BBZ1581 15mm

BBZ1583 22mm

i COMPRESSION CHROME – commonly used in conjunction with chrome or stainless steel piping when the pipe work is visible due to its aesthetic appearance.

Tel: 0121 557 3433 · Fax: 0121 520 6369 65


Pipe Fittings – End Feed

Couplers FI

BBYEF1100 15mm x 1/2"

BBYEF1102 22mm x 3/4"

BBYEF1103 28mm x 1"

Couplers

BBYEF1004 15mm(CXP 5108/EF)

BBYEF1006 22mm

BBYEF1008 28mm

BBYEF1009 35mm

BBYEF1010 42mm

BBYEF1011 54mm

BBYEF1012 67mm

BBYEF1013 76mm

BBYEF1014 108mm

Couplers MI

BBYEF1111 15mm x 1/4"

BBYEF1110 15mm x 1/2"(CXP 5103/EF)

BBYEF1112 22mm x 3/4"

BBYEF1113 28mm x 1"

BBYEF1020 15mm

BBYEF1021 22mm

Slip Couplers

Metric to Imperial Couplers

BBYEF1800 15mm x 1/2"

BBYEF1801 22mm x 3/4"

BBYEF1802 28mm x 1"

BBYEF1803 35mm x 1.1/4"

Reducing Couplers

BBYEF1152 22mm x 15mm









Fitting Reducers

















Long Tail Fitting Reducers




i For flux and solder see page 74.


Equal Elbows

BBYEF1253 15mm

BBYEF1255 22mm

BBYEF1257 28mm

BBYEF1258 35mm

BBYEF1259 42mm

BBYEF1260 54mm

BBYEF1261 67mm

BBYEF1262 76mm

BBYEF1263 108mm

90° Street Elbows


BBYEF1552 22mm

BBYEF1553 28mm

90° Long Tail Street Elbows

BBYEF1570 15mm

BBYEF1571 22mm

BBYEF1572 28mm

45° Obtuse Elbows


BBYEF1301 22mm

BBYEF1302 28mm

BBYEF1303 35mm

BBYEF1304 42mm

BBYEF1305 54mm

45° Obtuse Street Elbows

BBYEF1310 15mm

BBYEF1311 22mm

BBYEF1312 28mm

Elbows MI

BBYEF1370 15mm x 1/2"

BBYEF1372 22mm x 3/4"

BBYEF1374 28mm x 1"

Elbows FI

BBYEF1350 15mm x 1/2"

BBYEF1352 22mm x 3/4"

BBYEF1354 28mm x 1"


BBYEF1403 22mm

BBYEF1405 28mm

BBYEF1406 35mm

BBYEF1407 42mm

BBYEF1408 54mm

BBYEF1411 67mm

BBYEF1412 76mm

BBYEF1413 108mm

Equal Tees

i END FEED – the clean finish and slimline appearance offers a discreet and neat look to pipework while also being useful in areas where there is limited space. The installation of these fittings is slightly more complex than compression and solder ring products and will require separate solder reel, flux and blowtorch.

Tel: 0121 557 3433 · Fax: 0121 520 6369 67


BBYEF1205 15mm x 15mm x 22mm


































Reducing Tees

Reducing Tees FI

BBYEF1430 15mm x 15mm x 1/2"

BBYEF1431 22mm x 22mm x 1/2"

Stop Ends

BBYEF1602 15mm (CXP 5109/EF)

BBYEF1603 22mm

BBYEF1604 28mm

BBYEF1605 35mm

BBYEF1606 42mm

BBYEF1607 54mm


Part Crossovers

BBYEF1470 15mm

BBYEF1471 22mm

Full Crossovers

BBYEF1450 15mm

BBYEF1451 22mm

Pipe Fittings – Solder Ring

Couplers

BBYSR1004 15mm(CXP 5108)

BBYSR1006 22mm

BBYSR1008 28mm

BBYSR1009 35mm

BBYSR1010 42mm

BBYSR1011 54mm

Couplers MI

BBYSR1110 15mm x 1/2"(CXP 5103)

BBYSR1112 22mm x 3/4"

BBYSR1113 28mm x 1"

BBYSR1111 15mm x 1/4"

Equal Elbows


BBYSR1255 22mm

BBYSR1257 28mm

BBYSR1258 35mm

BBYSR1259 42mm

BBYSR1260 54mm

45° Obtuse Elbows


BBYSR1301 22mm

BBYSR1302 28mm

BBYSR1303 35mm

BBYSR1304 42mm

BBYSR1305 54mm

Reducing Couplers

BBYSR1152 22mm x 15mm










Couplers FI

BBYSR1100 15mm x 1/2"(CXP 5100)

BBYSR1102 22mm x 3/4"

BBYSR1103 28mm x 1"

BBYSR1101 15mm x 1/4"

BBYSR1020 15mm

BBYSR1021 22mm

Wallplate Connectors

BBYSR1870 15mm x 1/2" Wallplate Elbow

Slip Couplers

i For copper pipe and fitting products see page 74

Tel: 0121 557 3433 · Fax: 0121 520 6369 69



BBYSR1211 28mm x 28mm x 15mm


























Reducing Tees

Elbows FI

BBYSR1350 15mm x 1/2"

BBYSR1352 22mm x 3/4"

45° Obtuse Street Elbows

BBYSR1310 15mm

BBYSR1311 22mm

BBYSR1312 28mm

Elbows MI

BBYSR1370 15mm x 1/2"

BBYSR1372 22mm x 3/4"

Equal Tees

BBYSR1409 8mm

BBYSR1400 10mm


BBYSR1403 22mm

BBYSR1405 28mm

BBYSR1406 35mm

BBYSR1407 42mm

BBYSR1408 54mm


Fitting Reducers



















Street Elbows

BBYSR1570 15mm

BBYSR1571 22mm

BBYSR1572 28mm

Metric to Imperial Couplers

BBYSR1800 15mm x 1/2"

BBYSR1801 22mm x 3/4"

BBYSR1802 28mm x 1"

BBYSR1803 35mm x 1 1/4"

Long Tail Fitting Reducers




Long Tail Street Elbows

BBYSR1551 15mm

BBYSR1552 22mm

BBYSR1553 28mm

Stop Ends


BBYSR1602 22mm

BBYSR1603 28mm

BBYSR1604 35mm

BBYSR1605 42mm

BBYSR1606 54mm

i SOLDER RING – built in solder allows easy fitting with the use of a blowtorch, resulting in a sturdy reliable joint. Particularly desirable where fittings are visible as solder is more attractive with a slimline design than compression.

Tel: 0121 557 3433 · Fax: 0121 520 6369 71


Pipe Fittings – Threaded

Hex Bushes – Chrome Plated

WB0004CP 1/2" x 3/8"

WB0009CP 3/4" x 1/2"

WB0013CP 1" x 3/4"

Hex Nipples

WHN0001 1/8"

WHN0002 1/4"

WHN0003 3/8"

WHN0004 1/2"

WHN0005 3/4"

WHN0006 1"

WHN0007 1.1/4"

WHN0008 1.1/2"

WHN0009 2"

Running Nipples

WRN0004 1/2"

WRN0005 3/4"

WRN0006 1"

Barrel Nipples

WBN0004 1/2"

WBN0005 3/4"

WBN0006 1"

WBN0007 1.1/4"

WBN0012 1.1/2"

WBN0008 1" x 3"

WBN0009 1" x 4"

WBN0010 1" x 6"

WBN0020 2"

Flanged Plugs

WFP0009 1/8"

WFP0001 1/4"

WFP0002 3/8"

WFP0003 1/2"

WFP0004 3/4"

WFP0005 1"

WFP0006 1.1/4"

WFP0008 1.1/2"

WFP0007 2"

Hex Bushes

WB0004 1/2" x 3/8" (CXP 1007)

WB0005 1/2" x 1/4"

WB0006 1/2" x 1/8"

WB0007 3/4" x 1/8"

WB0008 3/4" x 5/8" (CXP 1002)

WB0009 3/4" x 1/2" (CXP1001)

WB0010 3/4" x 1/4"

WB0011 3/4" x 3/8"

WB0013 1" x 3/4"

WB0014 1" x 1/2"

WB0016 1.1/4" x 1"

WB0017 1.1/4" x 3/4"

WB0018 1.1/4" x 1/2"

WB0019 1.1/2" x 1.1/4"

WB0020 1.1/2" x 1"

WB0021 1.1/2" x 3/4"

WB0022 1.1/2" x 1/2"

WB0023 2" x 1.1/2"

WB0024 2" x 1.1/4"

WB0025 2" x 1"

WB0026 2" x 3/4"

WB0027 2" x 1/2"

WB0030 4" x 3"

i THREADED - Threaded fittings are sturdy and designed for permanent installation in mainly smaller pipework.

Pipe Fittings – Threaded

Hex Plugs

WHP0008 1.1/2"

WHP0009 2"

Blank Caps

WBC0003 1/2"

WBC0004 3/4"

WBC0005 1"

WBC0006 1.1/4"

WBC0007 1.1/2"

WBC0008 2"

Blanking Disk

WBD0001 15mm

WBD0002 22mm

Backnuts

WBT0003 1/2"

WBT0003BS 1/2" BS – larger flange

WBT0004 3/4"

WBT0004BS 3/4" BS – larger flange

WBT0005 1"

WBT0006 1.1/4"

WBT0007 1.1/2"

WBT0008 2"

WBT0009 2.1/4"

Sockets

WS0004 1/2"

WS0005 3/4"

WS0006 1"

WS0007 1.1/4"

WS0008 1.1/2"

WS0009 2"

Taper Plugs

WTP0004 1/2"

WTP0005 3/4"

WTP0006 1"

WTP0007 1.1/4"

WT0004 1/2"

WT0005 3/4"

WT0006 1"

Blank Caps – Chrome Plated

WBC0003CP 1/2" CP

WBC0004CP 3/4" CP

Female Equal Tee

Tel: 0121 557 3433 · Fax: 0121 520 6369 73


Pipe Fittings – Consumables

Flux

BBLLFLUX2 2oz LA-CO Regular Flux

BBLLFLUX4 4oz LA-CO Regular Flux

BBLLFLUX16 1lb LA-CO Regular Flux

Solder

BBLLS500 Leaded

BBLLFS500 Lead Free

Pipe Cutter – Large• Heavy duty

die cast body

CXP 5152 3mm-45mm Pipe Cutter

Copper Pipe

CXP 5106 15mm

CXP 5107 22mm

• Supplied in 3m lengths

PACK QTY500PTFE Tape

CXP 5281 PTFE Tape 1/2" roll x 12 metres

BBLPTFEG Gas PTFE Tape

Pipe Fittings – Pipe Clips

Hose Clips

Inta-Loc Snap-in Pipe Clips

J0115AA 15mm (CXP 5245)

J0122AA 22mm (CXP 5246)

J0128AA 28mm (CXP 5247)

L30ZHC012 (000) 9.5 - 12mm (CXP 5303)

L30ZHC016 (M00) 12 - 16mm (CXP 5304)

L30ZHC020 (00) 14 - 20mm (CXP 5305)

L30ZHC022 (0) 16 - 22mm (CXP 5306)

L30ZHC025 (0X) 18 - 25mm (CXP 5307)

L30ZHC030 (1A) 22 - 30mm (CXP 5308)

L30ZHC035 (1) 25 - 35mm (CXP 5309)

L30ZHC040 (1X) 30 - 40mm (CXP 5310)

L30ZHC045 (1M) 32 - 45mm (CXP 5311)

L30ZHC050 (2A) 35 - 50mm (CXP 5312)

L30ZHC060 (2X) 45 - 60mm (CXP 5313)

L30ZHC070 (3) 50 - 70mm (CXP 5314)

L30ZHC080 (3X) 60 - 80mm (CXP 5315)

L30ZHC090 (4) 70 - 90mm (CXP 5316)

L30ZHC100 (4X) 80 - 100mm

L30ZHC120 (5) 100 - 120mm

L30ZHC140 (6) 125 - 140mm

L30ZHC160 (7) 140 - 160mm

J0815 15mm (CXP 5175)

J0822 22mm (CXP 5176)

J0828 28mm (CXP 5177)

Copper Saddle Clips

J0815CP 15mm

J0822CP 22mm

Chrome Saddle Clips

CXP 5195 1/2"

CXP 5197 3/4"

CXP 5198 1"

CXP 5199 1. 1/4"

CXP 5200 1. 1/2"

CXP 5201 2"

Flexible Rubber Couplings

FXC0303 3" x 3" (CXP 5035)

FXC0403 4" x 3" (CXP 5036)

FXC0404 4" x 4" (CXP 5035)

Galvanised Steel Saddle Clips

PACK QTY100

PACK QTY100

PACK QTY100

PACK QTY10

PACK QTY100

PACK QTY100

Used to connect two lengths of cast iron, plastic, steel or lead pipe with a different diameter.

Fitted over each pipe end and tightened with a stainless steel jubilee clip, creating a watertight seal.

Tightens bolts to 60inch lbs. min / max torque and tested to maintain 4.3 p.s.i maximum line pressure

Tel: 0121 557 3433 · Fax: 0121 520 6369 75


Pre-Packed Fittings Now Pre-Packed Fittings Now AvailableAvailableWe are delighted to introduce a comprehensive range of the more popular Copper Pipe Fittings presented in Cronex retail branded packaging. These handy retail packs allow for clear visibility of the contents and are barcoded and ready for use.

Providing a convenient and discreet alternative to alleviate the problems of handling loose fittings and spares, this new initiative provides an efficient and easily-manageable retail option. Please enquire for further details and a full list of the products available.

*Further items to be added to the retail bagged range

IDEAL FOR DISPLAY AND OVER THE COUNTER SALES

Tel: 0121 557 3433 · Fax: 0121 520 6369 77

Plumbing Brassware

Valves 78

Flexible Connectors 82

Gas 83


Plumbing Brassware – Valves

Isolating Valve• Chrome on brass, C x C screw head operation 1/4 turn

BBL844 15mm (CXP 5515)

BBL842 22mm (CXP 5517)

PACK QTY10

Mini Ballvalve

CXP 5589 1/4" x 1/4"

CXP 5590 3/8" x 3/8"

CXP 5591 1/2" x 1/2"

PACK QTY10

Stopcock CxC

BBL810 15mm (CXP 5525)

BBL811 22mm (CXP 5526)

BBL812 28mm (CXP 5527)

• Brass unpolished

• British Standard

• Chrome on brass

• FxF

PACK QTY10

Stopcock FxF

CXP 5532 1/2"

CXP 5533 3/4"

CXP 5534 1"

• Brass unpolished PACK QTY10

Locking Stopcock

CXP 5531 1/2"

CXP 5530 3/4"


PACK QTY10

Gate Valve FxF• Brass unpolished

PACK QTY10

CXP 5538 1/2"

CXP 5539 3/4"

CXP 5540 1"

CXP 5550 1.1/4"

CXP 5552 2"

Gate Valve

BBL901BS 15mm

BBL902BS 22mm

BBL903BS 28mm

BBL917 35mm

BBL918 42mm

BBL919 54mm

• British Standard BS5154

PACK QTY10

Foot Valve• Brass unpolished

• Female thread inc strainer

CXP 5553 1/2"

CXP 5554 3/4"

CXP 5555 1"

CXP5556 1.1/4"

CXP 5557 1.1/2"

CXP 5558 2"

BBL820T&U 1/2"

BBL821T&U 3/4"

Tail & Union• To suit BBL820 & BBLB21 bibcocks

PACK QTY10


Brass Locking Hose Bibcock• Unpolished chromed brass

CXP 5513 1/2” Inlet x 3/4” outlet

CXP 5514 3/4” Inlet x 3/4” outlet

PACK QTY10

CXP 5500 1/2" Inlet - Unpolished

CXP 5501 1/2" Inlet - polished

PACK QTY10

CXP 5502/P 1/2" Inlet x 3/4" outlet

PACK QTY10Modern Hose

Union Bibcock

BBL820 1/2" Inlet x 3/4" outlet (CXP 5505)

BBL821 3/4" Inlet x 3/4" outlet (CXP 5506)


• British Standard BS1010

PACK QTY10

PACK QTY10

CXP 5541/S 1/2"

CXP 5542/S 3/4"

CXP 5543/S 1"

CXP5544/S 1.1/4"

CXP 5545/S 1.1/2"

CXP 5546/S 2"

CXP 5541 1/2"

CXP 5542 3/4"

CXP 5543 1"

CXP 5544 1.1/4"

CXP 5545 1.1/2"

CXP 5546 2"

PACK QTY10

Swing Checkvalve• Brass unpolished

• Swing flapper

Spring Checkvalve • Brass

• Spring loaded

Outdoor Tap Kits

BBL820/8 EconomyBBL825/8 Standard

Includes:• 1 x Compression

elbow• 1 x isolating valve with

handle• 1 x Compression tee

joint• 1 x Hose union

bibcock with double check valve

• 1 x Wallplate with copper tube

• 3 x Screws and plugs• 1 x Roll of PTFE tape

Includes:• 1 x 15mm Tee isolating

valve brass with double check valve

• 1 x 15" x 1/2" (500mm long x 7.5mm) bore flexi connector

• 1 x 1/2" BS1010 HU bib tap

• 1 x Wallplate with copper tube

• 1 x Roll of PTFE tape

Traditional Plain Bibcock

Traditional Hose Union Bibcock• Brass unpolished• Brass

Tel: 0121 557 3433 · Fax: 0121 520 6369 79


In-Line 1/4 Turn Valve• Chrome on brass

• FxFCXP 5561 1/2"

CXP 5562 3/4"

CXP 5563 1"

CXP 5564 1.1/4"

CXP 5565 1.1/2"

CXP 5566 2"

Heavy Duty Pressure Reducing Valve • Reduce the risk of burst pipes through installing a pressure

reducing valve to regulate water pressure

• Brass

• Max inlet 25 bar (350 PSI)

• Max outlet 1-6 bar (85 PSi)

• Adjustable

• Female x female

Thermostatic Pressure Relief Valve• Suitable for use with both solar and electrical systems

PACK QTY10


CXP 4107/B Brass

Y Adaptor• Universal to fit both washing

machine & dishwasher

• For twin hose coupling allowing 2 appliances to be used at the same time

PACK QTY10

Y Adaptor• Universal to fit both washing

machine & dishwasher

• For twin hose coupling allowing 2 appliances to be used at the same time

BBL709 Plastic (CXP4107/P)

PACK QTY10

CXP 5569 Brass

PACK QTY10

Pressure Reducing Valve • Reduce the risk of burst pipes through installing a pressure

reducing valve to regulate water pressure

• Brass

• Max inlet 10 bar (133 PSI)

• Max outlet 4 bar (3 PSi)

• Adjustable

• Female x female

CXP 5575 1/2"

CXP 5574 3/4"

CXP 5572 1"

CXP 5570 1/2" x 1/2"

CXP 5571 3/4" x 3/4"

i Pressure reducing valves are used to reduce the water pressure to the desired or accepted limits. Our adjustable valves can be adjusted to a specific limit, depending on the pressure of the water supply. They are not used to turn the water on or off but are a useful form of controlling water. Overly high water pressure will easily damage both plumbing systems and household appliances over a period of time


Straight Angle Valve• Chrome

CXP 4600 3/8" x 1/2"

CXP 4602 1/2" x 1/8"

PACK QTY10 1/4 Turn Angle

Valve• Chrome

CXP 4601 3/8" x 1/2"

PACK QTY10

Twin Outlet Angle Valve• Chrome

CXP 4603 1/2" x Twin 3/8" outlets

PACK QTY10 i Angle valves, or shut off valves as they can be known,

are used to control water flow to individual areas such as toilets and basins. This allows work to be carried out on a fixture without the need to shut off the whole water system at the main valve. We offer both straight and angled options with single and twin outlets

Tel: 0121 557 3433 · Fax: 0121 520 6369 81

CXP 4500 1/2" Slip x Slip

CXP 4501 3/4" Slip x Slip

CXP 4502 1" Slip x Slip

CXP 4504 1 1/2" Slip x Slip

CXP 4505 2" Slip x Slip

CXP 4510 1/2" Thread x Thread

CXP 4511 3/4" Thread x Thread

PACK QTY10PVC Ballvalve

• For cold water only


Plumbing Brassware – Flexible Connectors

Flex-Valv Connectors

CXP 4830 18" x 1/2" x 1/2"

• Ideal for connecting taps in confined spaces

• With captive rubber washer

• Built in shut off valve

• Easy Installation

• Stainless steel sheathingNO MORE

ANGLE

VALVES!

PACK QTY25M x F

CXP 4840 18" - 1/4" x 1/2"

CXP 4841 18" - 1/4" x 3/8"

CXP 4818 20" - 1/2" (M) x 1/2" (F)

M x M

CXP 4842 12" - 3/8" x 1/2"

CXP 4844 16" - 3/8" x 1/2"

CXP 4846 20" - 3/8" x 1/2"

CXP 4847 36" - 3/8" x 1/2"

CXP 4825 12" - 1/2" x 1/2"

CXP 4826 16" - 1/2" x 1/2"

CXP 4828 20" - 1/2" x 1/2"

Flexible Tap Connectors

CXP 4835 16" - 7/8" x 3/8"

CXP 4836 20" - 7/8" x 3/8"

Flexible Toilet Connectors

PACK QTY25

i Flexible connectors offer a flexible solution to connecting to the water supply in particularly tight or hard to reach locations. Our connectors are available in various lengths and are made from highly durable materials with a hard-wearing thread for a secure and reliable connection

PACK QTY25


• With captive rubber washers

• F x F connection


• With captive rubber washers

• F x F connection

• Stainless steel sheathing

Plumbing Brassware – Gas

Flex-Valv Connectors Cooker Hose – LPG EN14800

Cooker Hose – Natural Gas BS669:1• Supplied in bulk with flat washer

• 1/2" Bayonet

• Cut off valve

BBLGCH 3ft Hose only

BBLGCH4 4ft Hose only

CXH 5491 3ft incl 90° brass elbow

CXH 5491/4 4ft incl 90° brass elbow

BBLGCHLP 3ft Hose only

BBLGCH4LP 4ft Hose only

CXH 5490 3ft incl 90° brass elbow

CXH 5490/4 4ft incl 90° brass elbow

BBLGCF 1/2" BSP Angle Bayonet Plug-In Socket

Brass Elbow

• 1/2" Bayonet

• Cut of valve

i For PTFE gas tape see page 74

Tel: 0121 557 3433 · Fax: 0121 520 6369 83


Thomas Dudley Group

Employing just under 500 people in the West Midlands, the Thomas Dudley Group brings together a portfolio of integrated engineering businesses. These are underpinned by a commitment to continually investing in our people and cutting edge technology.

Additionally they arepassionate about manufacturing in the UK and providing customers with a quality assured environmentally responsible source of supply.

The Thomas Dudley Group is dedicated to providing unrivalled solutions supported by exceptional service. We are proud to remain a family owned organisation that is driven by the same values as when we started our business in 1920. As a result, we are able to forge long term relationships with each and every customer.

Cronex, part of Masefield Beta offer a selection of Plumbing, Hardware and Electrical products that enhance and compliment Masefield's product range in both the UK and export market.

Masefield Beta Ltd has established a reputation for manufacturing and supplying quality assured plumbing, hardware and electrical products to trade, retail, merchant, distributor and OEM customers.

Thomas Dudley Ltd is committed to providing customers with a market-leading portfolio of bathroom and washroom solutions that help to save time, water and money with exceptional service under the Dudley brand.

Waterfit Ltd is a major manufacturer of gunmetal fittings and water meter manifolds to the UK water industry as well as being the manufacturer of choice in many international markets around the world.

MDL believes in enhancing the human interaction with every product and specialises in zinc diecasting and the manufacturing of components for the home, medical, leisure and general engineering sectors where a variety of high specification finishes are required.

Rugby Plastics designs, develops and delivers injection moulded plastic components for countless applications around the world.Thomas Dudley Foundry Ltd manufactures the

UK's largest range of construction, utility and plumbing castings. They have developed the world’s most flexible engineering foundry that designs and manufactures grey iron, SG iron, ADI and SiMo castings for customers across the UK and overseas.

Thomas Dudley

Masefield-Beta

MDL

Rugby Plastics

Thomas Dudley Foundry

Waterfit Ltd

Cronex

Tel: 0121 557 3433 · Fax: 0121 520 6369 85

Washers 86

Plumbing Boxes 88

Washers & Seals


Seating Washer PACK QTY100

Rubber Washers

OD (mm)

ID (mm)

Thickness (mm)

CXP 5220 1/2" Pillar Tap 38.60 22.10 1.50

CXP 5221 3/4" Pillar Tap 44.12 26.65 2.00

CXP 5222 1" Tank 62.70 34.00 2.00

CXP 5223 1.1/4" Lavatory Basin

57.10 40.50 3.00

CXP 5224 1.1/4" Sink 85.20 43.20 1.50

CXP 5226 1.1/4" Bath

CXP 5225 1.1/2" Sink 88.00 51.60 1.00

CXP 5227 1.1/2" Bath 71.40 46.50 1.50

TRAP & WASTE

TOILET CISTERN / TANK

OD (mm)

ID (mm)

Thickness (mm)

CXP 5679 Fibre, 1/2" 21.94 10.99 1.50

CXP 5676 Fibre, 3/4" 23.80 16.73 1.50

PACK QTY100

OD (mm)

Thickness (mm)

CXP 5678 Rubber 1/2" 12.46 3.00

CXP 5677 Rubber 3/4" 18.37 3.00


Diaphragm Washer

CXP 5251 1/2" to suit plastic ball valves

Washers & Seals

CXP 5228 1/2"/3/4" Universal Top Hat Washer

L04050TH 1/2" Top Hat Washer

L04075TH 3/4" Top Hat Washer

Split-Klick

L04SKTH Split-Klick Top Hat Washer

L05SKCW Split-Klick Centralising Washer

TAP

TAP

General Washers


Ballvalve Piston Washer

TAP

Flat Tap Washers c/w Brass Jumper

CXP 5284 1/2"

L10AFJB75 3/4"

PACK QTY100

PACK QTY10

PACK QTY100

PACK QTY50

Flat Tap Washers

OD (mm)

ID (mm)

Thickness (mm)

CXP 5294 3/8” 15.84 4.46 4.50

CXP 5298 1/2” 18.56 4.70 4.50

L10AFPL063 5/8" 21.42 4.87 5.00

CXP 5299 3/4” 24.96 4.93 5.00

CXP 5300 1” 30.76 4.73 4.00

TAP

OD (mm)

ID (mm)

Thickness (mm)

CXP 5695 3/8" 15.22 7.05 7.00

CXP 5696 1/2" 17.08 3.37 9.00

CXP 5688 5/8" 19.77 4.55 9.00

CXP 5689 3/4" 22.90 5.06 10.00

L10BDPL100 1" 29.80 10.20

Dome Tap Washers

TAP

Washers & Seals

L10BDJP038 3/8"

L10BDJP050 1/2"

L10BDJP063 5/8"

L10BDJP075 3/4"

Dome Tap Washers c/w Plastic Jumper

TAP

American Tap Washers

OD (mm)

ID (mm)

Thickness (mm)

L10DLUSE Emco Tap Washer 14.50 3.00 4.80

L10DLUSP Pfister Tap Washer 17.70 2.00 4.80

L10DLUSS Sayco Tap Washer 13.00 3.00 4.0

TAP

Tap Washers - Carded

L10AFPL050-ST 1/2" Flat (CXP4007)

L10BDPL050-ST 1/2" Dome (CXP4008)







TAP

• Supplied on retail clip strip

• 3 washers per bag, 12 bags per strip, 36 washers total

• Priced per strip

Plastic Tap Jumpers - Carded

L10BDJPO50-CD 1/2" (CXP4005)

L10BDJPO75-CD 3/4" (CXP4006)

TAP

• 25 on a card

PACK QTY100

PACK QTY100

PACK QTY100

PACK QTY100

Tel: 0121 557 3433 · Fax: 0121 520 6369 87


Washers & Seals - Plumbing Boxes

L08HP18MEGA/TAP

3/8" Flat Tap Washers x 50




3/8" Dome Tap Washers x 25




1/2" Delta Tap Washers x 50

3/4" Delta Tap Washers x 50

1/2" Tantofex Tap Washers x 50

3/4" Tantofex Tap Washers x 50

Holdtite Mega Tap Washer Box

CONTAINS

695PRODUCTS

L08HP12BW-BR

1/2" Ballvalve Rubber Washers x 10


1/2" Ballvalve Seat Fibre x 10

Small/Medium Brass Split Pins x 2/5


1"/1.4" Ballvalve Rubber Washers x 5/5

High Pressure Seats x 5

Aquasave Ballvalve Rubber Washers x 5


Ballvalve Stem Washer x 2

115 'O' Ring x 2

Low Pressure Seats x 5

Aquasave Ballvalve Rubber Washers x 5

Ballvalve Plumbers Repair Kit Box

TAP


Washers & Seals - Plumbing Boxes

L08HP12OR-BR

018 ‘O’ Ring x 15

019 ‘O’ Ring x 15

115 ‘O’ Ring x 15

212 ‘O’ Ring x 5

213 ‘O’ Ring x 5

119 ‘O’ Ring x 5

121 ‘O’ Ring x 5

117 ‘O’ Ring x 10

110 ‘O’ Ring x 15

025 ‘O’ Ring x 15

118 ‘O’ Ring x 5

119 ‘O’ Ring x 5

Imperial ‘O’ Ring Plumbers Repair Kit Box

Holdtite Mega Plumbing BoxL08HP18MEGA

Various Tap Washers

Ballvalve Washers

Poly Washers

Various ‘O’ Rings

Hose Washers

Fibre Washers

Lift Arms

Supa Tap A, B & D

1.1/4" Ballvalve Diaphragm Washer

Bath and Basin Plugs

Ballvalve Seatings

Bath and Basin Chain

Brass Olives

Cotter Pins

Radiator Keys

C Links

Universal Seat Fixing Kit

CONTAINS

394PRODUCTS

Tel: 0121 557 3433 · Fax: 0121 520 6369 89


kWh BTU/h

0.5 1,706.07082

1 3,412.14163

2 6,824.28327

5 17,060.7082

10 34,121.4163

20 68,242.8327

BTU/h kWh

1,000 0.29307107

2,000 0.58614214

5,000 1.46535535

1,0000 2.9307107

2,0000 5.8614214

5,0000 14.6535535

ENERGY

Bar PSI

0.1 1.45037738

0.2 2.90075475

0.5 7.25188689

1 14.5037738

2 29.0075475

5 72.5188689

10 145.037738

PSI Bar

1 0.0689475729

10 0.689475729

20 1.37895146

50 3.44737865

100 6.89475729

200 13.7895146

500 34.4737865

PRESSURElitre gallon

(imperial)

1 0.219969

2 0.439938

3 0.659907

4 0.879877

5 1.09985

6 1.31981

7 1.53978

8 1.75975

9 1.97972

10 2.19969

gallon (imperial)

litre

1 4.54609

2 9.09218

3 13.6383

4 18.1844

5 22.7305

6 27.2766

7 31.8226

8 36.3687

9 40.9148

10 45.4609

VOLUME & CAPACITY

Metric Imperial

1 mm 0.0393700787 in

1 cm 0.393700787 in

1 m 3.2808399 ft

1 m 1.09361 yd

25.4 mm 1 in

304.8 mm 12 in

0.3048 m 1 ft

0.9144 m 1 yd

LENGTH

MEASUREMENT CONVERSIONS

Tel: 0121 557 3433 · Fax: 0121 520 6369 91

Hardware

Tools 92

Safety Products 96

General Hardware 98

Homewares 100

Fixtures & Fittings 102

Hinges

Bolts

Hooks & Staples

Brackets

Window & Door Furniture

Screws, Nails & Fixings

102

106

110

112

113

116


Hardware – Tools

Metal Cutting & Grinding Discs

PACK QTY25

CXH 2121 4.1/2" x 1/8" x 7/8 115 x 2 x 22mm

CXH 2122 5" x 1/8" x 7/8" 125 x 3 x 22mm

CXH 2123 7" x 1/8" x 7/8" 180 x 3 x 22mm

CXH 2124 9" x 1/8" x 7/8" 230 x 3 x 22mm

CXH 2125 12" x 1/8" x 7/8" 300 x 3 x 22mm

CXH 2126 12" x 1/8" x 1" 300 x 3 x 25mm

CXH 2127 14" x 1/8" x 1 350 x 2.5 x 25mm

Metal Cutting Discs

CXH 2160 4.1/2" x 1/24" x 7/8" 115 x 1 x 22.2mm

CXH 2159 7" x 1/16" x 7/8" 180 x 1.6 x 22.2mm

Super Thin Cutting DiscsPACK QTY

25

Metal Grinding Discs

CXH 2140 4" x 1/4" x 5/8" 100 x 6 x 16mm

CXH 2142 4.1/2" x 1/4" x 7/8" 115 x 6 x 22mm

CXH 2144 5" x 1/4" x 7/8" 125 x 6 x 22mm

CXH 2146 7" x 1/4" x 7/8" 180 x 6 x 22mm

CXH 2148 9" x 1/4" x 7/8" 230x 6 x 22mm

PACK QTY25

PACK QTY10

Tar Brush PACK QTY12

PACK QTY10Wire Brush

CXH 14460 Short handle 10”

CXH 14470 Long handle 48”

CXH 14735 4 rows

PACK QTY10Farmers Reaper File

CXH 2172 6" Length

CXH 2173 8" Length

CXH 2174 10" Length

• Wooden handle

• Wooden handle

Hardware – Tools

Tile Grouter Sponge Faced Float

Hydro Sponge Float

Internal Angle Trowel

Decorators Hawk

DIY Texturing Brush

PACK QTY25

PACK QTY10

CXH 34987 8.1/4 "x 4.1/4" 210mm x 210mm CXH 34989 11.1/2" x 4.1/2" 295mm x 115mm

CXH 34986 11.1/2" x 4.1/2" 295mm x 115mm CXH 34988 6 1/2" 165mm

CXH 34971 6" x 6" 150mm x 150mm CXH 34984 6" x 6" 150mm x 150mm

CXH 34980 14" x 6" 350 x 150mm

CXH 34985 14" x 8" 350 x 200mm

CXH 34990 11" x 4 1/2" 280 x 140mm

PACK QTY15

PACK QTY15

PACK QTY25

PACK QTY10

PACK QTY25

Plasterers Floati Comfortable to use, hard-wearing

and dependable

Tel: 0121 557 3433 · Fax: 0121 520 6369 93


‘Drain Master’ Set

Hardware – Tools

BBDR3RR 3/4" (19mm) Dia x 3ft

BBDR3RR7/8 7/8" (22mm) Dia x 3ft

BBDR3RR1 1" (25mm) Dia x 3ft

BBDR3REX Extension set, pack of 4 rods

Polypropylene Rods with Riveted Brass Ferrules

Drop Scraper

Double Worm Screw

Rubber Plunger

• Universal fitting

• Screws into soft materials, making withdrawal easy

BBDR3RRS No tools (CXP 5211) (Rods only)

BBDR2 c/w Plunger and Double Worm

BBDR3 c/w Plunger, Double Worm and Drop Scraper

BBDR4 c/w Plunger, Double Worm, Drop Scraper and Guide Wheel (CXP 5210)


• Rods strapped together and polybagged

• Each set supplied with 10 Polypropylene Rods 3/4" Dia x 3ft with Riveted Brass Ferrules • Universal fitting

BBDRDW 2" diameter


• Removes most obstructions


• Hinged blade passes over obstruction and reverts back to vertical position, allowing obstruction to be dragged back to operator

BBDR4S 100mm 4" diameter

BBDR6S 150mm 6" diameter

BBDR4P 100mm 4" diameter

BBDR6P 150mm 6" diameter

DRAIN RODS

UK manufactured polypropylene drain rods, joined by brass ferrules which are riveted to the polypropylene for maximum security

COUPLINGS

Universal type with a course thread which simply screws together – rod rotation should always be in a clockwise direction to avoid parting

i SIZES

The standard length of our rods are 3ft however diameter varies

¾” – Most popular and suitable for most work

7/8” – More popular with the professional user

1” – More rigid and suitable for heavier work and longer runs

Hardware – Tools

Force Cup• Clears most blockages in sinks, baths etc

BBDRFCM Medium (CXH 5181)

BBDRFCL Large (CXH 5182)

Long Reach Basin Wrench

CXP 5156 Tension operated jaw grip, adjustable

ValveRe-Seating Tool

CXP 5153 Includes 11/16", 3/4" and 1" cutters

Guide Wheel

BBDRGW Guide Wheel

PACK QTY10

PACK QTY6

• Adjustable

Soft Grip Measuring Tapes• Auto locking

CXE 4081 16mm wide, 3m/10ft long



PACK QTY6

Tel: 0121 557 3433 · Fax: 0121 520 6369 95


Hardware – Safety Products

Ear Defenders

CXH 5167 Foam filled ear pads CXH 5163 Disposable dust mask

CXH 5171 Clear safety spectaclesCXH 5168 Impact protection Goggles

Dust Mask - Disposable

Safety SpectaclesSafety Goggles

CXH 5166/1 Yellow

CXH 5156/2 Green

CXH 5156/3 Blue

CXH 5156/4 White

CXH 5156/5 Red

• High impact

• Low dome profile

• Fully adjustable head strap

• Assorted colours available

Safety Helmet

PACK QTY50

PACK QTY6

PACK QTY10

PACK QTY25

• Suitable for light industrial duty & outdoor construction

• Foam inserts providing comfort

• Polypropylene headband

• PVC covered foam pads

PACK QTY10

• High velocity impact protection • Vented

Hardware – Safety Products

CXH 25241 PVC Gloves with knitted wrists

Poly Palm Coated Gloves

CXH 25265 Poly palm coated gloves CXH 25246 14" Gauntlets

PVC Coated Gloves

PVC Gloves - Knitted Wrist

Working Gloves

CXH 25220 Heavy duty working gloves

PACK QTY10

PACK QTY12

PACK QTY12

PACK QTY12

i Various styles of work and safety gloves to protect hands and wrists from potential hazards in domestic, work site and commercial environments.

All our gloves provide general comfort and cushioning when handling rough or heavy materials whilst enhancing grip on hand held equipment to ensure control

Tel: 0121 557 3433 · Fax: 0121 520 6369 97


Hardware – General Hardware

FLASHBAND

Bright Aluminium Size Rolls per carton

CXH 0302 2” 50mm 12

CXH 0303 3” 75mm 8

CXH 0304 4” 100mm 6

CXH 0305 6” 150mm 4

CXH 0306 8” 200mm 3

CXH 0307 9” 225mm 2

CXH 0308 12” 300mm 2

CXH 0309 18” 450mm 1

CXH 0310 24” 600mm 1

Tarpaulin Sheets

CXH 0392 Green 8' x 12'

CXH 0393 Green 16' x 12'

CXH 0394 Green 15' x 18'

CXH 0395 Green 15' x 24'

CXH 0396 Green 18' x 24'

CXH 0397 Green 18' x 30'

CXH 0398 Green 24' x 30'

• Fully roped and eyed

• PVC ployester

• Choice of colours available

Other sizes and colours available upon request

Self Amalgamating Tape

CXP 4690 5M x 19mm Roll

• Repairs leaking plumbing joints• Repairs & seals waste pipes• Insulates & waterproofs

electrical connections• Emergency repairs to

car radiator hoses & auto electrics

• Conforms to irregular surfaces & shapes

• Ideal for mending vacuum cleaner hoses

• Leaves no sticky residue

Our Rabo-band is a popular and unique bright aluminium self-adhesive sealing strip with many uses and comes in a range of sizes up to 24”.Flashband has proved so effective and easy to use that anyone is now able to achieve a highly professional finish to sealing and flashing work without the need for a professional builder.

The product consists of an aluminium-facing strip backed with a pressure-sensitive sealing compound, protected by a siliconised release paper that must be removed before use.

Flashband can withstand most weather conditions and can be used in a huge variety of places such as, Metal boxes, gutters, down-pipes, window frames, protruding pipes, cement box gutters, chimneys, pipe vents, ridging and capping, under window sills, boat leeks, just to name a few.

PACK QTY10

Hardware – General Hardware

Wood Preservative

CXH 7538 1 Litre

CXH 7539 5 Litre

Heavy Duty Builders Bucket • 3 Gallon capacity

• Pouring lip

• Calibrated

• Galvanised gripper handle

PACK QTY10

PACK QTY6

PACK QTY4

CXH 21546 Black

CXH 21545 Yellow

Tub Trug

• 2 sizes

• UV sun resistant

• 6 Different colours

• Virtually indestructible

• Super flexible and durable

• Super strong 'CE' tested handles

26 Litre

CXH 3000 purple

CXH 3000/1 Yellow

CXH 3000/2 Green

CXH 3000/3 Blue

CXH 3000/4 Red

CXH 3000/6 Pink

42 Litre

CXH 3001 Purple

CXH 3001/1 Yellow

CXH 3001/2 Green

CXH 3001/3 Blue

CXH 3001/4 Red

CXH 3001/6 Pink

• Colourless AZ

solignum

• Provides protection

against termites,

wood borers and

fungal decay

• Penetrates wood

without the need for

primer

• Easy application

and minimum

maintenance

i See page 118 for further information

Tel: 0121 557 3433 · Fax: 0121 520 6369 99


Hardware – Homewares

CXH 25050 48lb Domestic mop bucket CXH 25110 Plastic mop bucket

CXH 14230 Corn broom

Plastic Mop Bucket

Rotary Airer

Corn Broom

PACK QTY6

PACK QTY12

PACK QTY25

CXH 23420 10m

CXH 23421 15m

CXH 23422 20m

CXH 23423 25m

CXH 23424 130m

Galvanised Mop Bucket

CXH 14300 13" Black synthetic broom head

CXH 14301 60" x 1.1/8" Wooden broom handle

Clothes Line

PACK QTY6

• With built in Squeezing ring

• Complete with squeezing ring

• Supplied in assorted colours

CXH 23470 3 Arm, split pole, 90ft of line length

• Wire corded• Plastic coated

• Head and handle sold separately

PACK QTY10

Black Synthetic Broom• Traditional design

Hardware – Homewares

CXH 5162 Rubber door wedge

Rubber Door Wedge

Drywall Picture Hooks

PACK QTY100

PACK QTY10

CXH 23515 Hard plastic

CXH 23520 Soft plasticCXH 23854 20" x 18" 50 x 45cm

Yellow Dusters PACK QTY10

PACK QTY12

CXH 21272 Curtain wire, 100ft per box

CXH 21273 Eyes (200 per box)

CXH 21274 Hooks (200 per box)

Curtain Wire

CXH 5380 1" Brass

CXH 5381 1.1/2" Brass

CXH 5382 2" Brass

CXH 5380/WS 1" White

CXH 5381/WS 1.1/2" White

Cup Hooks

CXH 6511 Medium

CHX 6512 Large

PACK QTY100

Dustpan & Brush Set

• Plastic coated

• Durable rubber for strong grip

• Can be used dry or damp

• Ideal for hanging pictures on solid walls

PACK QTY12

Tel: 0121 557 3433 · Fax: 0121 520 6369 101


Hardware – Fixtures & Fittings - Hinges

Solid Brass Ball Bearing Hinges

Stainless Steel Ball Bearing Hinges

Zinc Plated – Steel Ball Bearing Hinges

Electro Brass Plated – Steel Ball Bearing Hinges

Stainless Steel Butt Hinge

Pcs/Inner Pcs/Outer

CXI 9104 3” x 2” 5 100

CXI 9105 4” x 3” 5 50

Pcs/Inner Pcs/Outer

CXI 9100 4” x 4” x 2mm 10 50

CXI 9101 4” x 3” x 2mm 10 50

CXI 9102 3.1/2” x 3.1/2” x 2mm

10 50

CXI 9103 3” x 3” x 2mm 10 50

Pcs/Inner Pcs/Outer

CXI 8100 4” x 4” x 2mm 5 3

CXI 8101 4” x 3” x 2mm 5 3

CXI 8102 3.1/2” x 3.1/2” x 2mm

5 3

CXI 8103 3” x 3” x 2mm 5 3

Pcs/Inner Pcs/Outer

CXI 6151 4” x 3” x 2mm 10 50

CXI 6153 3” x 3” x 2mm 10 50

Pcs/Inner Pcs/Outer

CXI 6051 4” x 3” x 2mm 10 50

CXI 6053 3” x 3” x 2mm 10 50

BAG

BOX

Polybagged with header card

Boxed

CLAM Clamshell packed

*All packaging supplied barcoded

CLAM CLAM

CLAM CLAM

i All supplied with fixing screws

BAG

You will find a range of ironmongery products for both domestic and commercial needs, packaged for retail sale and offered in a wide variety of finishes to suit all décor types.

PBAG Plain polybagged


Solid Brass Butt Hinge

Flush Hinge• Mild steel

Pcs/Inner Pcs/Outer

CXI 1051 1" x 3/4" 10 1000

CXI 1052 2" x 1.1/8" 10 500

CXI 10525 2.1/2" x 1.3/8" 10 360

CXI 1053 3" x 1.5/8" 10 240

CXI 1054 4" x 2.3/8" 10 80

Pcs/Inner Pcs/Outer

Brass Plated

CXI 1088/B 2" 5 200

CXI 1089/B 2.1/2" 5 200

CXI 1090/B 3" 5 100

Zinc Plated

CXI 1090 3" 5 100

CXI 1091 4" 5 100

BAG

BAG


Tel: 0121 557 3433 · Fax: 0121 520 6369 103



Steel Butt Hinge - Loose Pin

Self Colour Pcs/Inner Pcs/Outer

CXI 18403/S 3" 5 100

CXI 18404/S 4" 5 50

Electro Brassed

CXI 18403/B 3" 5 100

CXI 18404/B 4" 5 50

Zinc Plated

CXI 18403/Z 3" 5 100

CXI 18404/Z 4" 5 50

White

CXI 18403/W 3" 5 100

CXI 18404/W 4" 5 50

Steel Butt Hinge - Fixed Pin

Self Colour Pcs/Inner Pcs/Outer

CXI 183815 1.1/2" 5 250

CXI 18382 2" 5 100

CXI 183825 2.1/2" 5 100

CXI 18383 3" 5 100

CXI 18384 4" 5 50

Zinc Plated

CXI 183825/Z 2.1/2" 5 100

CXI 18383/Z 3" 5 100

CXI 18384/Z 4" 5 50

Electro Brassed

CXI 18382/B 2" 5 100

CXI 183825/B 2.1/2" 5 100

CXI 18383/B 3" 5 100

CXI 18384/B 4" 5 50

Pcs/Inner Pcs/Outer

CXI 45104 Self colour 4" 10 50

CXI 45105/Z Zinc plated 4" 10 50

CXI 45104/B Electro brassed 4"

10 50

Strong Steel Butt Hinge

BAG

BAG

BAG



Pcs/Inner Pcs/Outer

CXI 12104 4” 5 100

CXI 12106 6” 5 50

CXI 12108 8” 5 50

CXI 12109 9” 5 50

CXI 12110 10” 5 50

CXI 12112 12” 5 50

Tee Hinges - Black Tee Hinges - Zinc Plated

Heavy Duty Tee Hinges

Pcs/Inner Pcs/Outer

CXI 12104/Z 4” 5 100

CXI 12106/Z 6” 5 50

CXI 12108/Z 8” 5 50

CXI 12109/Z 9” 5 50

CXI 12110/Z 10” 5 50

CXI 12112/Z 12” 5 50

Black Japanned Pcs/Inner Pcs/Outer

CXI 12104/H 4” 5 50

CXI 12106/H 6” 5 50

CXI 12108/H 8” 5 50

ZincPlated Pcs/Inner Pcs/Outer

CXI 12104/HZ 4” 5 50

CXI 12106/HZ 6” 5 50

CXI 12108/HZ 8” 5 50

BAGBAG

BAG


Tel: 0121 557 3433 · Fax: 0121 520 6369 105


Hardware – Fixtures & Fittings - Bolts

Barrel Bolt

Brass Pcs/Inner Pcs/Outer

CXI 22015 1.1/2" 10 500

CXI 2202 2” 10 450

CXI 22025 2. 1/2” 10 360

CXI 2203 3" 10 320

CXI 2204 4" 10 240

CXI 2206 6" 10 160

Chrome Plated

CXI 2202/C 2” 10 450

CXI 22025/C 2 .1/2” 10 360

CXI 2203/C 3" 10 320

CXI 2204/C 4" 10 240

CXI 2206/C 6" 10 160

Brass Necked Barrel Bolt


CXI 2402 2" 10 450

CXI 24025 2. 1/2” 10 360

CXI 2403 3” 10 320

CXI 2404 4" 10 240

CXI 2406 6" 10 160

Chrome Plated

CXI 2403/C 3” 10 320

CXI 2404/C 4" 10 240

CXI 2406/C 6" 10 160

BAG

BAG



Heavy Duty Brass Barrel Bolt

Pcs/Inner Pcs/Outer

CXI 2706 6” 5 70

CXI 2708 8” 5 50

Flush Bolt


CXI 4206 6" x 3/4" 5 100

CXI 4208 8" x 3/4" 5 50

Chrome Plated

CXI 4206/C 6" x 3/4" 5 100

CXI 4208/C 8" x 3/4" 5 50

Zinc Plated Brenton Pad Bolt

Pcs/Inner Pcs/Outer

CXI 0024/A 4" 5 60

CXI 0026/A 6" 5 50

CXI 0028/A 8" 5 50

CXI 00210/A 10" 5 30

BAG

BAG

BAG


Tel: 0121 557 3433 · Fax: 0121 520 6369 107



STAINLESS STEEL TOWER BOLT

Pcs/Inner Pcs/Outer

CXI 9106 3" 5 100

CXI 9107 4" 5 100

CXI 9108 6" 5 50

CXI 9109 8" 5 50

CXI 9110 10" 5 40

CXI 9111 12" 5 40


BAG

Aluminium Straight Barrel Bolt

Pcs/Inner Pcs/Outer

CXI 2802/1 2” 10 100

CXI 2803/1 3” 10 100

CXI 2804/1 4” 10 100

CXI 2806/1 6” 10 100 Pcs/Inner Pcs/Outer

CXI 2853 3” 10 100

CXI 2854 4” 10 100

CXI 2856 6” 10 100

Aluminium Necked Barrel Bolt

BAG

BAG

Our Stainless Steel Tower Bolts can be used in various situations where security is required. Sizes range from 3” to 12” and are easy to install and use whilst offering a neat finish, complimenting internal fittings when used indoors.

Stainless steel is a highly popular material to use for bolts due to its excellent life cycle, environmentally friendly properties and recyclable qualities. Our range of stainless steel tower bolts offer strength, durability and corrosion protection, as well as a strong resistance to high heat and extremely cold temperatures.

Corrosion- resistant stainless steel is not corrosion proof and corrosion can occur if the products are installed or handled incorrectly. Keeping the surface clean and contaminant free is one of the best ways of preventing any extraneous corrosion from occurring.

i See page 109 for straight and necked Tower Bolts in black and zinc plated versions”


Straight Tower Bolt

Epoxy Black Pcs/Inner Pcs/Outer

CXI 9233/A 3” 10 100

CXI 9234/A 4” 10 100

CXI 9236/A 6” 5 75

CXI 9238/A 8” 5 45

CXI 92310/A 10” 5 45

CXI 92312/A 12” 5 40

Zinc Plated Pcs/Inner Pcs/Outer

CXI 9233/Z 3” 10 100

CXI 9234/Z 4” 10 100

CXI 9236/Z 6” 5 75

CXI 9238/Z 8” 5 45

CXI 92310/Z 10” 5 45

CXI 92312/Z 12” 5 40

Necked Tower Bolt

Epoxy Black Pcs/Inner Pcs/Outer

CXI 9234/N 4" 10 100

CXI 9236/N 6" 5 50

CXI 9238/N 8" 5 45

Zinc Plated Pcs/Inner Pcs/Outer

CXI 9234/NZ 4" 10 100

CXI 9236/NZ 6" 5 50

CXI 9238/NZ 8" 5 45


BAG

BAG

Tel: 0121 557 3433 · Fax: 0121 520 6369 109


Hat & Coat Hook• Electrobrass

CXH 5495 Hat & coat hook Single Robe Hook• Electrobrass

CXH 5496 Single robe hook

Double Robe Hook• Electrobrass

CXH 5497 Double robe hook

PACK QTY10

PACK QTY10

PACK QTY10

Hardware – Fixtures & Fittings - Hooks & Staples

Safety Hasp & Staple

Epoxy Black Pcs/Inner

Pcs/Outer

CXI 6173 617 - 3 3" 10 100

CXI 61745 617 - 4.5 1/2" 10 100

CXI 6176 617 - 6 6" 10 100

Bright Zinc

CXI 6173/Z 617 - 3 3" 10 100

CXI 61745/Z 617 - 4.5 1/2" 10 100

CXI 6176/Z 617 - 6 6" 10 100

Pcs/Inner

Pcs/Outer

CXI 6103 610 - 3 3" 10 100

CXI 6104 610 - 4 4" 10 100

CXI 6106 610 - 6 6" 10 100

CXI 6108 610 - 8 8" 10 100

Wire Hasp & Staple


BAGBAG

PBAG

PBAG

PBAG

Hardware – Fixtures & Fittings - Hooks & Staples

Pcs/Inner Pcs/Outer

CXI 9112 2.1/2" 5 100

CXI 9113 3" 5 100

CXI 9114 4" 5 100

CXI 9115 5" 5 100

CXI 9116 6" 5 100

CXI 9117 8" 5 100

Stainless Steel Cabin Hook

Pcs/Inner Pcs/Outer

CXI 2804 28-4 4" 5 100

CXI 2806 28-6 6" 5 50

CXI 2808 28-8 8" 5 50

Pcs/Inner Pcs/Outer

CXI 0441 Standard weight 3"/76mm

10 100


10 100


10 100


10 100

CXI 0445 Heavy weight 6"/152mm

10 100

CXI 0446 Heavy weight 8"/203mm

10 100

Victorian Brass Cabin Hook

BAG BAG

BAG


Epoxy Black Cabin Hook

Victorian Brass Bow Handle

Pcs/Inner Pcs/Outer

CXI 0463 7"/152mm 10 60

BAG

Tel: 0121 557 3433 · Fax: 0121 520 6369 111


Hardware – Fixtures & Fittings - Brackets

White Pcs/Inner

Pcs/Outer

CXI 2404/W 4” x 3” 20 400

CXI 2405/W 5” x 4” 20 400

CXI 2406/W 6” x 5” 20 320

CXI 2408/W 8” x 6” 20 200

CXI 24010/W 10” x 8” 20 120

CXI 24012/W 12” x 10” 20 100

CXI 24014/W 14” x 12” 20 80

Grey Pcs/Inner

Pcs/Outer

CXI 2404/G 4” x 3” 20 400

CXI 2405/G 5” x 4” 20 400

CXI 2406/G 6” x 5” 20 320

CXI 2408/G 8” x 6” 20 200

CXI 24010/G 10” x 8” 20 120

CXI 24012/G 12” x 10” 20 100

CXI 24014/W 14” x 12” 20 80

Enamelled Shelf Brackets

BOX

Hardware – Fixtures & Fittings - Window & Door Furniture

CXI 0709 Rabo Aluminium Door Pack CXI 0809 Rabo Victorian Brass Door Pack

Aluminium Door Pack• Supplied with fixing screws• Complete with 2 Lever,

2 1/2“ Mortice Locks with 3 Keys• Nickel plated forend and Aluminium handles and fittings.• Packed in 2’s

Victorian Brass Door Pack• Supplied with fixing screws• Complete with 2 Lever,

2 1/2“ Mortice Locks with 3 Keys• Nickel plated forend and Victorian Brass handles

and fittings• Packed in 2’s.

Universal Door Closer• Boxed (barcoded)• Suitable for LH or RH fitting

CXI 3186 White powder coated CXI 3187 Aluminium finish

Economy Door Closer• Boxed (barcoded)• Suitable for LH or RH fitting

PACK QTY5

PACK QTY5

CLAM

BOX BOX

CLAM

PACK QTY2

PACK QTY2

Tel: 0121 557 3433 · Fax: 0121 520 6369 113

Pcs/Inner

Pcs/Outer

CXI 0482 Casement Stay 10” / 254mm 10 50


CXI 0484 Casement Fastener with hook & mortice plates

10 60



Chrome Plated Victorian Casement Brassware

Pcs/Inner

Pcs/Outer



CXI 0688 Casement Fastener with hook & mortice plates

10 60

Heavy Duty Victorian Casement Brassware


BAG

BAG

Pcs/Inner

Pcs/Outer

CXI 0391 Casement Stay - 2 Pin Self Colour 10” / 254mm 10 50


CXI 0393 Fastener with Night Latch Self Colour 10 60


Polished Aluminium Finish Casement Fittings

Pcs/Inner

Pcs/Outer




Gold Aluminium Finish Casement Fittings

White Aluminium Finish Casement Fittings

Pcs/Inner

Pcs/Outer





Tel: 0121 557 3433 · Fax: 0121 520 6369 115

BAG

BAG

BAG


Steel Mirror Screws

CXH 5318 3/4" x No. 8 Zinc plated

CXH 5319 1" x No. 8 Zinc plated

CXH 5320 1.1/4" x No. 8 Zinc plated

CXH 5321 1.1/2" x No. 8 Zinc plated

CXH 5322 2" x No. 8 Zinc plated

PACK QTY10

Mirror Movements• Electrobrass

CXH 5148 Supplied as 4 pc set

Mirror Corners• 1 1/4” X 1 1/4” (p)• Nickel Plated

CXH 5147 Individual

CXH 5147/K 4 pcs & screws

Mirror Clips• Nickel Plated

CXH 5149 5/8”

PACK QTY10

PACK QTY100

PACK QTY10

Hardware – Fixtures & Fittings - Screws, Nails & Fixings

• With CP Dome Head

PBAGPBAG

PBAG

PBAG

Pcs/Inner Box

Pcs/Outer Carton

CXI 2007 25mm 100 80

CXI 2008 30mm 100 80

CXI 2009 35mm 100 80

CXI 2010 40mm 100 48

CXI 2011 45mm 100 48

CXI 2012 50mm 100 48

CXI 2013 60mm 100 48

CXI 2014 65mm 100 48

CXI 2015 70mm 100 32

CXI 2016 75mm 100 32

CXI 2017 80mm 100 32

BOX

Masonry Nails• Medium size• Supplied in outer box qtys

Hardware – Fixtures & Fittings - Screws, Nails & Fixings

No.5 Size Guage Length Pcs/Inner

Pcs/Outer

CXI 8000 1/2" 3mm 12mm 200 125

CXI 8001 3/4" 3mm 20mm 200 125

CXI 8002 1" 3mm 25mm 200 125


Pcs/Outer

CXI 8003 1/2" 3.5mm 12mm 200 125

CXI 8004 5/8" 3.5mm 16mm 200 125

CXI 8005 3/4" 3.5mm 20mm 200 100

CXI 8006 1" 3.5mm 25mm 200 45

CXI 8007 1"1.1/4" 3.5mm 30mm 200 45

Ultimate Wood Screws• Includes drill bit in every pack


Pcs/Outer

CXI 8008 3/4" 4mm 20mm 200 45

CXI 8009 1" 4mm 25mm 200 45

CXI 8010 1"1.1/4" 4mm 30mm 200 27

CXI 8011 1"1.1/2" 4mm 40mm 200 24

CXI 8012 1"1.3/4" 4mm 45mm 200 24

CXI 8013 2" 4mm 50mm 200 24

CXI 8014 2.1/2" 4mm 60mm 200 24

CXI 8015 2.3/4" 4mm 70mm 200 24


Pcs/Outer

CXI 8016 1"1.1/4" 5mm 20mm 200 30

CXI 8017 1"1.1/2" 5mm 25mm 200 30

CXI 8018 2" 5mm 30mm 200 24

CXI 8019 2.1/2" 5mm 40mm 200 16

CXI 8020 2.3/4" 5mm 45mm 200 16

CXI 8021 3" 5mm 50mm 200 16

CXI 8022 3.1/2" 5mm 60mm 100 24

CX1 8023 4" 5mm 70mm 100 24


Pcs/Outer

CXI 8024 2" 6mm 50mm 200 16

CXI 8025 2.1/2" 6mm 60mm 100 16

CXI 8026 2.3/4" 6mm 70mm 100 16

CXI 8027 3" 6mm 80mm 100 16

CXI 8028 3.1/2" 6mm 90mm 100 16

CXI 8029 4" 6mm 100mm 100 16

BOX

Tel: 0121 557 3433 · Fax: 0121 520 6369 117


RaftersPurlins

FencesFloor Boards

Studs& Noggings

CeilingJoists

DecksFloor Joists

Ballusters &Railings

Baseboards Fascia Trusses

Colourless AZSolignum Colourless AZ contains permethrin, propiconazole and tebuconazole. Always read the label. Use pesticides safely.

Distributed by:

What is SOLIGNUM Colourless AZ?

SOLIGNUM COLOURLESS AZ is the new wood preservative fluid from Solignum which penetrates into the wood and remains there as an active barrier against wood-rot, wood borers, termites and fungal decay. It kills fungi and wood borers and preserves against future attack. Timber treated with Solignum Colourless AZ retains its original appearance and can be painted or varnished over if desired. Colourless Solignum is not suitable for use in greenhouses or as a final weather-resistant finish.

Features

• Supplied ready-for-use

• Easy to apply

• Penetrates wood rapidly

• Effective against wood-boring insects

• When dry, treated timber is not harmful to garden plants.

SOLIGNUM the No.1 wood preservative that

provides sure protection against termites, wood

borers and fungi.

Application

Colourless Solignum can be applied by brush or immersion to bare dry wood. Before treatment, timber should be clean, free of paint or varnish and with no surface moisture. Cut areas of treated timber should be given a further liberal brush application. Treated timber can be painted over and glued when dry. Do not use Colourless Solignum near food or plants.

Internally: Solignum Colourless AZ is for use in buildings on timbers above the damp-proof course, including floor joists, floorboards, stairs, roofing timbers and joinery.

Externally: Solignum Colourless AZ is for use on timbers out of ground contact and in buildings on external timbers above the damp-proof course, including doors, window frames, surrounds, frames, fascia's and bargeboards.

Available in 1 & 5 Litre Cans*

PREVENTS ATTACK BY TERMITES, WOODBORERS

AND FUNGAL DECAY

For EXTERIOR and INTERIOR use

Tel: 0121 557 3433 · Fax: 0121 520 6369 119

Lights, Bulbs & Tubes 131

Fluorescent Tubes & Bulbs

Exterior Lighting

Tools 136Wiring Accessories 120

Switches & Sockets

Lampholders

Junction & Pattress Boxes

Plugs & Adaptors

Transformers

Electrical

Fans 134

Cable Management 139

Extension Blocks & Leads

Trunking & Earthing

Conduit Fittings

Cable Accessories

120

125

126

129

130

139

141

142

145

131

133


Electrical – Wiring Accessories - Switches & Sockets

Single Blank Plate Double Blank Plate

1 Gang - 2 Way Switch1 Gang - 1 Way Switch

2 Gang - 1 Way Switch 3 Gang - 2 Way Switch

Pcs/Inner

Pcs/Outer

CXE 7016 Single blank plate 10 200

Pcs/Inner

Pcs/Outer

CXE 7017 Double plate blank 10 200

Pcs/Inner

Pcs/Outer

CXE 7018 1 Gang, 1 way, 10A 10 200

Pcs/Inner

Pcs/Outer

CXE 7019 1 Gang, 2 way, 10A 10 200

Pcs/Inner

Pcs/Outer

CXE 7020 2 Gang, 2 way, 10A 10 200

Pcs/Inner

Pcs/Outer

CXE 7021 3 Gang, 2 way, 10A 10 200


4 Gang - 2 Way Switch 6Gang - 2 Way Switch

4 Gang - 2 Way Single Plate Switch• Space saving single plate

• Complete with screws & stoppers

• 2 way functionality allows seperate switches to operate

the same light fitting

Intermediate Switch 10A RJ11 Telephone Socket Outlet

Pcs/Inner

Pcs/Outer

CXE 7029 4 Gang 2 way, 10A 10 100

Pcs/Inner

Pcs/Outer

CXE 7022 4 Gang, 2 way, 10A 5 200

Pcs/Inner

Pcs/Outer

CXE 7023 6 Gang, 2 way, 10A 10 200

Pcs/Inner

Pcs/Outer

CXE DV1246X Intermediate switch 10A

10 200

Pcs/Inner

Pcs/Outer

CXE 7027 RJ11 Socket 10 200

Tel: 0121 557 3433 · Fax: 0121 520 6369 121


Switched Sockets with USB Ports• Modern flush style profile

• For use with British Pattress boxes

• 1 or 2 gang

• 2 USB ports

• 250V 13A

Pcs/Inner

Pcs/Outer

CXE 7048 1 Gang, 2 USB 10 100


Pcs/Inner

Pcs/Outer

CXE 7049 2 Gang, 2 USB 4 100

US Type Switched Socket Outlet • 110V, 15A

• Single and double

• Switched profile

• For use with British type flush and pattress boxes

Pcs/Inner

Pcs/Outer

CXE 7046 US type single 10 100

Pcs/Inner

Pcs/Outer

CXE 7047 US type double 5 50

i Ideal for homes and businesses that require multiple charging stations without limiting available sockets and are useful for quickly charging phones or tablets

1 Gang Switched Socket Outlet

2 Gang Switched Socket Outlet

2 Gang Switched Socket & Neon

1 Gang Switched Socket & Neon

1 Gang 15A Switched Socket Outlet

45A Cooker Switch

Pcs/Inner

Pcs/Outer

CXE 7024 1 Gang, 13A 10 200

Pcs/Inner

Pcs/Outer

CXE 7024/N 1 Gang neon, 13A 10 200

Pcs/Inner

Pcs/Outer

CXE 7025/N 2 Gang neon, 13A 5 200

Pcs/Inner

Pcs/Outer

CXE 7071 1 Gang, 15A 10 200


Pcs/Inner

Pcs/Outer

CXE 7025 2 Gang, 13A 5 200

Pcs/Inner

Pcs/Outer

CXE 7036 Cooker switch with 45A 5 50

Tel: 0121 557 3433 · Fax: 0121 520 6369 123


1Gang 45A SwitchWater Heater Switch With Neon

Pcs/Inner

Pcs/Outer

CXE 7026 Switch with neon 20A 10 200

Pcs/Inner

Pcs/Outer

CXE 7072 1 Gang, neon, 45A 8 80

Dual Voltage Shaver Socket


CXE 7073 Dual voltage shaver socket

CXE DDB168 Double flush box, metal 47mm

CXE DV1229 Double surface box, plastic 45mm

Available with pattress boxes

i For further pattress boxes see pages 126-128

Electrical – Wiring Accessories - Lamp Holders

B22 Straight Lamp Holder

Pcs/Inner

Pcs/Outer

CXE 4028 B22 Straight, short skirt 10 300


Pcs/Inner

Pcs/Outer

CXE 4029 B22 Straight, H/O skirt 10 360


Pcs/Inner

Pcs/Outer

CXE 4030 B22 Straight, long skirt 10 360

Pcs/Inner

Pcs/Outer

CXE 4031 B22 Angled, short skirt 12 360

B22 Angled Lamp Holder

B22 Angled Holder

Pcs/Inner

Pcs/Outer

CXE 4032 B22 Angled, long skirt 10 360

ES Angled Lampholder

Pcs/Inner

Pcs/Outer

CXE 4033 ES Angled 10 360

Pcs/Inner

Pcs/Outer

CXE 4034 ES Straight 10 360

ES Straight Lampholder

Ceiling Light Fitting• 12" Pendant

Pcs/Inner

Pcs/Outer

CXE 4060E With ES (E27) fitting 10 200

CXE 4060 With BC (B22) fitting 10 200

• Short skirt design • H/O skirt design

• Long skirt design

• Long skirt design

• Short skirt design

Tel: 0121 557 3433 · Fax: 0121 520 6369 125


Electrical – Wiring Accessories - Junction & Pattress Boxes

Junction Box - 5A Junction Box - 20A

Junction Box - 30A

1 Gang Pattress Boxes

Pcs/Inner

Pcs/Outer

CXE 4037 5A 4 Terminal 10 200

Pcs/Inner

Pcs/Outer


Pcs/Inner

Pcs/Outer


Pcs/Inner

Pcs/Outer

CXE 4040

16mm 12 200

Pcs/Inner

Pcs/Outer

CXE 4041 25mm 10 200

Pcs/Inner

Pcs/Outer

CXE 4042 35mm 6 100

Ceiling Lampholder Backing Plate

Pcs/Inner

Pcs/Outer

CXE 4061 Backing plate 10 500

• 4 terminal

• 3 terminal

• 4 terminal


2 Gang 25 mm Pattress Box

2 Gang 35 mm Pattress Box

Pcs/Inner

Pcs/Outer

CXE 4044 2 Gang 35mm 5 100

Pcs/Inner

Pcs/Outer

CXE 4043 2 Gang, 25mm 5 100

2 Gang US Style Knockout Pattress Box • Multiple cable knock outs for rear, top and side entry

Multiple Knockout Pattress Boxes• Multiple conduit & trunking knock outs

Trunking

Conduit

Pcs/Inner

Pcs/Outer

CXE 5161 Double 2 gang 32mm 5 100

CXE 5160 Single 1 gang 32mm 10 100

Trunking

Conduit

Pcs/Inner

Pcs/Outer

CXE 5162 Double 50mm 10 100

i Essential for effectively containing and concealing electrical fittings and wiring, vastly improving the appearance in both domestic and commercial environments. Whether embedded within the wall or mounted on top, there are a range of options to suit many requirements

Tel: 0121 557 3433 · Fax: 0121 520 6369 127


Steel Pattress Boxes

Single Pcs/Inner

CXE DDB162 Single 25mm 20

CXE DDB164 Single 35mm 20

Double

CXE DDB163 Double 25mm 10

CXE DDB165 Double 35mm 10

Flush Switch/Socket Boxes with Adjustable Lug

Adjustable lug for easy fixing

Pcs/Inner

Pcs/Outer

CXE 4050 Single 35mm 20 200

CXE 4051 Double 35mm 10 100


• 20mm knockouts

• Adjustable lug

• Flush mounting

• Multiple Knockouts

Electrical – Wiring Accessories - Plugs & Adapters

Multi Adaptor with NeonUnbreakable Plug

Pcs/Inner

Pcs/Outer

CXE 4045 13A , Fused, 3 pin 10 400

Pcs/Inner

Pcs/Outer

CXE D188R1W 13A, Fused, 3 pin 10 400

Pcs/Inner

Pcs/Outer

CXE 4046 Fused, 3 pin 16 200

Pcs/Inner

Pcs/Outer

CXE 4063 Fused, 3 pin 10 100 UK To US Adaptor

Pcs/Inner

Pcs/Outer

CXE 4064 UK to US 10 50

Pcs/Inner

Pcs/Outer

CXE D85/F Fused, 3 pin 10 250

3 Way Block Socket Adaptor

Pcs/Inner

Pcs/Outer

CXE D189 15A, round pin 20 400

Tough Plug

Round 3 Pin Plug

Multi Adaptor Plug

Tel: 0121 557 3433 · Fax: 0121 520 6369 129


Electrical – Wiring Accessories - Transformers

STEP DOWN TRANSFORMERS - 240V to 110V

Wattage Outlets Handle Pack Qty

CXE 4700 100W 2 No 12

CXE 4701 200W 2 No 12

CXE 4702 300W 2 No 8

CXE 4703 500W 2 No 6

CXE 4704 750W 2 No 4

CXE 4705 1000W 2 Yes 2

CXE 4706 1500W 2 Yes 2

CXE 4707 2000W 2 Yes 2

CXE 4708 3000W 2 Yes 2

CXE 4709 5000W 4 Yes 1

• Supplied with a fitted UK style 3 pin plug

• Individually boxed for easy retail handling

• Latest transformers have at least 2 power outlets

• High reliability

• High durability

A Step Down Transformer is a device which converts a high primary voltage to a low secondary voltage. Our range of transformers range from 100w to 5000w, offer reliability, durability and in stepping down the voltage, then make transition power easier and cheaper.

i Larger transformers come with handy carry handles for easy transporation.

• Includes LED starter to enable easy conversion of Standard Fluorescent Fittings

• Longer Life

• Cool White, (6500K)

Electrical – Light Bulbs & Tubes - Fluorescent & Bulbs

Fluorescent Batten Fittings • Easy twist fittings

• 220/240V

Double

CXE 4004 Single 4ft, 40W

Single

CXE 4000 Single 2ft, 20W

CXE 4001 Single 4ft, 40 W

CXE 3010 2ft tubes, 9W


PACK QTY10

PACK QTY10

PACK QTY6

LED T8 Tubes

PACK QTY25


CXE 4011 4ft tubes, 36 W

PACK QTY25

T8 Fluorescent Type Tubes• T8 thin type

• 220/240v

• Tropical daylight

i Works with standard fluorescent batten fittings

Tel: 0121 557 3433 · Fax: 0121 520 6369 131


Electrical – Light Bulbs & Tubes - Fluorescent & Bulbs

Ballasts 240VFluorescent Starter 220V

PACK QTY50

PACK QTY50

Energy Saving Lamps• Tropical daylight

• Screw (E27) and bayonette (B22) variants

• 8000 Hours lifespan

Spiral

CXE 3068 Bayonet B22, 20W

CXE 3069 Screw E27, 20W

Mini Spiral







CXE 4014 20W, 50Hz

CXE 4015 40W, 50Hz

CXE 4014/60 20 W, 60Hz

CXE 4015/60 40W, 60Hz

Pcs/Inner Pcs/Outer

CXE 4013 4-65W 25 200

• Single

Electrical – Light Bulbs & Tubes - Exterior Lighting

Round Bulkhead Light Fixture• ES Screw type

• 60W

CXE 4052 Epoxy black

CXE 4053 Epoxy white

CXE 4094 Black plastic, 60W, 50 Hz

CXE 4099 White plastic, 60W, 50 Hz

CXE 4200 Black with PIR

CXE 4201 White with PIR

Exterior Moulded Universal Lanterns• 220/240V

• ES Screw lamp holder

• Up or down mount Installation

PACK QTY10

PACK QTY10

PACK QTY10

PACK QTY10

CXE 4054 Epoxy black

CXE 4055 Epoxy white

Oval Bulkhead Light Fixture• ES Screw type

• 60W

Twin Spotlight with PIR• 2 x 150W

Tel: 0121 557 3433 · Fax: 0121 520 6369 133


Electrical – Fans

16" Pedestal Fan

CXE 4210 16" Pedestal fan CXE 4214 18" Pedestal fan

CXE 4209 16" Pedestal fan

PACK QTY2

PACK QTY2

PACK QTY2

• Varaible 3 speed

• 30º Vertical adjustment

• 90º Oscillation

• Heavy duty safety grill

• 220/240 V, 50Hz

• CE Approved

• Fitted with 3 pin UK style plug

• White





• 220/240 V, 50Hz


• CE Approved

• Black

18" Pedestal Fan





• 220/240 V, 50Hz


• CE Approved

• Red & Chrome

16" Pedestal Fan

i Introducing the Curved Air fan range from Cronex, a range of quality fixed and portable fans to suit a variety of lifestyles and levels of comfort

16" Red Desk Fan

CXE 4218 Red and chrome desk fan


• 30º Vertical

adjustment


• Heavy duty safety

grill

• 220/240 V, 50Hz

• CE Approved

• Fitted with 3 pin UK

style plug

• Red & Black

PACK QTY4

Electrical – Fans

CXE 4095 16" White, remote control ceiling fan

CXE 4089 16" White fan speed controller/dimmer

Tower Fan

CXE 4216 White pedestal tower fan

16" Wall Fan

CXE 4196 16" White wall fan


• Pull string operation

• Vertical tilt with 90º Oscillation


• 220/240 V, 50Hz


16" Ceiling Fan With Remote Control• Remote variable speed


• Full oscillation


• 220/240 V, 50Hz

• Supplied with control

unit

• Variable speed selection

• Full oscillation


• 220/240 V, 50Hz

• Supplied with control unit

• CE Approved

PACK QTY2

PACK QTY3

PACK QTY3

PACK QTY3

Fan Controller / Light Dimmer Switch

Tel: 0121 557 3433 · Fax: 0121 520 6369 135


Electrical – Tools

Digital Multimeter Digital Multi Tester

105mm Mains Tester

Soft Grip Long Nose Pliers• Tested to 1000V

CXE 4065 Digital multimeter

CXE 4067 63mm, 3mm, 120-250V mains tester

CXE 4071 200mm, 1000V safe

CXE 4066 Digital multi tester

CXE 4068 105mm, 3.5mm, 120-250V mains tester

CXE 4072 200mm, 1000V safe

63mm Mains Tester

PACK QTY6

PACK QTY6

PACK QTY6

PACK QTY6

PACK QTY6

PACK QTY6Soft Grip

Combination Pliers• Tested to 1000V


CXE 4075 Electricians pocket knife CXE 4076 0.5 - 6mm Stripper/crimper

PACK QTY4

PACK QTY6

PACK QTY6

PACK QTY4

160mm Soft grip Side Cutters• Tested to 1000V

4 Piece Soft Grip Insulated Screwdriver Set• Soft grip handles

• Deep set blade sheath for safety

4 Way Wire Stripper/Crimper• Carbon steel blade

• Plastic hand grips for comfort & safety

Electricians Pocket Knife• Reinforced handle

• With wire strippers on blade

CXE 4077 0.5 - 2mm Auto stripper

Automatic Wire Stripper• Spring loaded

• Replaceable blades

• Moulded soft grip handles

CXE 4072 1-3.3mm Heavy duty stripper

Heavy Duty Automatic Wire Stripper• Spring loaded

• Replaceable blades

• Moulded soft grip handles

CXE 4073 160mm, diagonal side cutters 1000V safe CXE 4074 Screwdriver set, 1000V

Tel: 0121 557 3433 · Fax: 0121 520 6369 137



CXE 4079 25W 230V CXE 4080 60W 230V

PACK QTY12

PACK QTY1225W 230V

Soldering Iron• 1.1m cable

• UK plug

60W 230V Soldering Iron• 1.1m cable

• UK plug

i See page 74 for leaded & lead free solder

Electrical – Cable Management - Extension Blocks and Leads

Pcs/Inner

Pcs/Outer

CXE DC3721WH Single, white 10 300

Single 13A Extension Socket

Single 13A Extension Socket

Twin 13A Extension Socket

Twin 13A Extension Socket

Pcs/Inner

Pcs/Outer

CXE DC3721BK Single, Black 10 300

Pcs/Inner

Pcs/Outer

CXE DC3722WH Twin, White 10 200

Pcs/Inner

Pcs/Outer

CXE DC3722BK Twin,black 10 200

Tel: 0121 557 3433 · Fax: 0121 520 6369 139

i Our rubber 1 and 2 gang extension sockets are ideal when wanting to fit and use a cable length of your choice


CXE 3070 13A, white 10 300

1 Gang, 5 Metre Extension Lead




CXE 3073 13A, white 10 300

CXE 3075 13A, white 10 80

Electrical – Cable Management - Extension Blocks and Leads

PACK QTY24

PACK QTY40

PACK QTY25

PACK QTY24

PACK QTY10


CXE 3072 13A, white 10 200

PACK QTY20

CXE 3074 13A, white 10 200

Terminal Block Connectors

CXE D1201/P 3A Block connector strip





PACK QTY50

Electrical – Cable Management - Trunking & Earthing

Mini Trunking - Slimline Range

Mini Trunking - Self Adhesive Range

Earth Rods & Clamps

CXE 5133 3 Metre, 18 x 9mm




CXE 5137 3 Metre, 38x 25mm


PACK QTY15

PACK QTY20





CXE 5143 3 Metre, 38x 25mm


PACK QTY15

PACK QTY20

Earth Clamps

CXE ERC38 3/8"

CXE ERC58 5/8"

CXE ERC34 3/4"

PACK QTY20

PACK QTY10

Earth Rods (minimum order 100pcs, can be mixed)

CXE ER384 4ft x 3/8" Non extendable

CXE ER384 4ft x 5/8" Extendable



i Earthing is crucial, electrical installations need to be connected to the earth, our earth rods and clamps allow the electrical circuit to reach the ground safely and securely.

Tel: 0121 557 3433 · Fax: 0121 520 6369 141


Electrical – Cable Management - Conduit Fittings

Plain Box

CXE 5000 20mm PACK QTY60

CXE 5001 20mm

CXE 5002 25mm

PACK QTY60

Through Box

CXE 5003 20mm

CXE 5004 25mm

PACK QTY60

Angle Box Tee Box 4 Way Intersection

Loop In Box

'Y' Box 'U'Box

PACK QTY60

PACK QTY60

CXE 5001 20mm

CXE 5002 25mm

PACK QTY25

PACK QTY20

PACK QTY20

PACK QTY20

CXE 5012 20mm PACK QTY20

CXE 5009 20mm

CXE 5010 25mm

CXE 5007 20mm

CXE 5008 25mm

PACK QTY20

PACK QTY20

PACK QTY20

PACK QTY16

CXE 5005 20mm

CXE 5006 25mm

PACK QTY20

PACK QTY20

CXE 5001 20mm

CXE 5002 25mm

PACK QTY60

PACK QTY60

CXE 5015 20mm

CXE 5016 25mm

PACK QTY20

PACK QTY20

CXE 5001 20mm

CXE 5002 25mm

PACK QTY60

PACK QTY60

CXE 5013 20mm

CXE 5014 25mm

PACK QTY20

PACK QTY20

Terminal Box


Circular Lid Inspection Tees

Round Conduit Clips

Bending Springs

CXE 5117 20mm

CXE 5118 25mm

PACK QTY100

PACK QTY100

PACK QTY10

CXE 5119 20mm

CXE 5120 25mm

PACK QTY20

PACK QTY20CXE 5019 65mm PACK QTY

100

• Spring Clipped Saddles

CXE 5080 20mm, Heavy gauge

CXE 5081 25mm, Heavy gauge

CXE 5083 20mm, Light gauge

CXE 5084 25mm Light gauge

• Heavy & light gauge

i An electrical system is only as reliable as it's conductors and conduit systems and fittings. Our cable conduit fittings are used to successfully connect cable conduit together or to other devices.

Tel: 0121 557 3433 · Fax: 0121 520 6369 143


Standard Bends

Strap Saddles

Spacer Bar Saddles


Female Adaptors

Male Adaptors

Plain Couplers

CXE 5045 20mm

CXE 5046 25mm

PACK QTY100

PACK QTY20

CXE 5097 20mm

CXE 5098 25mm

PACK QTY100

PACK QTY100

CXE 5145 20mm

CXE 5146 25mm

PACK QTY100

PACK QTY50

CXE 5033 20mm

CXE 5034 25mm

PACK QTY100

PACK QTY50

CXE 5038 20mm

CXE 5039 25mm

PACK QTY100

PACK QTY100

CXE 5086 20mm

CXE 5087 25mm

PACK QTY100

PACK QTY100

Electrical – Cable Management - Cable Accessories

PVC Electrical Tape• Flame retardant• Manufactured to high standard• Complies BS No. 3924• Self extinguishing• Perfect for insulating electrical wires• 18mm x 25m

Fuses• Available in 1A, 2A, 3A, 4A, 5A, 13A, 15A, 20A, 30A, 45A

CXEDEF02 2A Plug top fuse




CXEDEF1300 13A Cartridge fuse

CXEDEFLC15 15A Cartridge fuse board type



PACK QTY100

PACK QTY50

Pcs/Inner Box

Pcs/Outer Carton

CXH 2029/G 1.5mm Grey 100 100

CXH 2028/G 2.5mm Grey 100 100

CXH 2029 1.5mm White 100 100

CXH 2028 2.5mm White 100 100

CXH 2029/D 1.5mm Double clip grey

100 100

CXH 2028/D 2.5mm Double clip grey

100 100

CXH 2068/G 4mm Grey 100 100

CXH 2051/G 6mm Grey 100 100

CXH 2052/G 10mm Grey 100 100

Cable Clips

Pcs/Inner

Pcs/Outer

CXE 4410 Black 10 100

CXE 4411 Green & Yellow 10 100

CXE 4412 Brown 10 100

CXE 4413 Blue 10 100

CXE 4414 White 10 100

CXE 4415 Red 10 100

CXE 4416 Green 10 100

• Grey and white flat clips available in a range of sizes

• Supplied in inner box qty's

Tel: 0121 557 3433 · Fax: 0121 520 6369 145

146

IndexAdapter Plug 129

American Sinks 17

Angle Valves 81

Autosyphons 46

B

Ballvalves 51

Ballvalve Seatings and Pistons 53

Ballvalve Washers 86

Barrel Bolts 106

Basin Taps 10

Basin Waste Seal Kit 22

Bath & Shower Mixers 32

Batten Fittings 131

Bibcocks 79

Brackets (Bathroom) 29/34

Brass Ballvalves 54

Brass Fittings 62

Brooms 100

Buckets 99

Brushes 92

Bulbs 132

C

C Links 42

Cabin Hooks 111

Cable Clips 145

Casement Fittings 114

Checkvalves 79

Chrome Tube 29

Cistern & fitting kits 40

Cistern Hole Stoppers 23

Cistern Levers 36

Cistern Pulls 37

Clothes Line 100

Close Coupling Kits 56

Compression Fittings 62

Conduit Fittings 142

Copper Floats 59

Copper Pipe 74

Cup Hooks 101

Curtain Wire 101

Cutting Discs 92

D

Diaphragm Washers 44/86

Door Closer 113

Door Packs 113

Drain Rods and Tools 94

Dusters 101

Dust Masks 96

E

Earth Rods 141

End Feed Fittings 66

Extension Sockets & Leads 139

Exterior Lighting 133

F

Fans 134

Farmers Files 92

Fill & Float Valves 49

Flapper Valve 45

Flashband 98

Flexible Connectors 82

Floats 59

Floats & Trowls 93

Flouorecent Tubes 131

Flushing Valves 45

Flushpipe Connectors 57

Flux 74

Footvalves 78

Force Cups 95

Fuses 145

G

Gas Hoses 83

Gas Tape 74

Gatevalves 78

Gloves 97

Goggles 96

Grab Support Rails 28

H

Hasps & Staples 120

Helmets 96

Hinges 102

Hooks 110

Hose Clips 75

I

Isolating Valves 78

J

Junction Boxes 126

L

Lamp Holders 125

Levers 36

Lift Arms 37

LED Tubes 131

M

Measuring Tapes 95

[email protected] · www.cronexuk.com

B

C

D

E

F

G

H

I

J

L

M

147Tel: 0121 557 3433 · Fax: 0121 520 6369

Mini Ballvalve 78

Mirror Accessories 116

Mop Buckets 100

N

Nails & Screws 116

O

O Rings 89

Olives 64

Outdoor Tap Kits 79

Overflows 56

P

Pan Connectors 12

Pattress Boxes 126

Pipe Clips 75

Pipe Cutters 74

Plasterers Floats 93

Pliers 136

Plugs (Electrical) 129

Plugs & Chains 23

Plumbers Boxes 88

Pressure Reducing Valves 80

PTFE Tape 74

PVC Ballvalve 81

PVC Tape 145

R

Rod Brackets 29

Rubber Couplings 75

S

Saddle Clips 75

Self Amalgamating Tape 98

Shelf Brackets 112

Shower Curtain 27

Shower Heads 31

Shower Hoses 31

Shower Valves 30

Sinks 13

Sink Strainers 23

Sink Taps 6

Soap Dishes 27

Sockets 121

Solder 74

Soldering Iron 138

Solder Ring Fittings 69

Spreaders 48

Steel Pattress Boxes 128

Stopcocks 78

Switches 120

Syphons 42

Syphon Accessories 44

Syphon Washers 44

T

Taps 6

Tap Hole Stoppers 23

Tap Swops 26

Tap Washers 86

Taupaulin 98

Testers 136

Threaded Fittings 72

Toilet Brush & Holder 26

Toilet Roll Holders 26

Toilet Roll Holder Inserts 26

Toilet Seats 35

Toilet Seat Hinges 35

Tools (Electrical) 136

Tools (Hardware) 92

Top Hat Washers 86

Tower Bolts 108

Transformers 130

Traps 24

Trunking 141

Tubs 99

U

Urinals 47

Urinal Accessories 48

Urinal Pipework 47

Urinal Spreaders 48

USB Sockets 122

V

Valves 78

W

Washers and Seals 86

Washers (Carded) 87

Wastes 18

Water Heater Switch 124

Wax Seals 58

Wire Strippers 137

Wood Preservative 99/118

Wood Screws 117

Y

Y Adaptors 80

N

O

P

R

S

T

U

V

W

Y


Notes

Tel: 0121 557 3433 · Fax: 0121 520 6369 149

Notes

CHECK OUT OUR NEW WEBSITE!

VISIT WWW.CRONEXUK.COM

DEFINITIONS

1.1 The Company means Masefield Beta Ltd

1.2 The Buyer means the person, firm or company who purchases the Goods from the Company.

1.3 Contract means any contract between the Company and the Buyer for the sale of goods or services from the Company to the Buyer;

1.4 Delivery Point : the place where delivery of the Goods is to take place under condition 6.1 or 6.7;

1.5 Goods : any goods or services agreed in the Contract to be supplied to the Buyer by the Company on any goods supplied in substitution of the original Goods, (including any parts or part of them) pursuant to Clause 10 and Clause 13.2 and Clause 14.1 of this Contract;

1.6 A reference to a particular law is a reference to it as it is in force for the time being taking account of any amendment, extension, application or re-enactment and includes any subordinate legislation for the time being in force made under it;

1.7 A reference to one gender includes a reference to the other gender;

1.8 Condition headings do not affect the interpretation of these conditions.

2 APPLICATION

2.1 These Conditions apply to all Contracts for the sale of goods and/or supply of services by the Company to any Buyer and prevail over and extinguish all terms and conditions of contract imposed by the Buyer or implied by trade, custom, practice or course of dealing in so far as such terms and conditions are inconsistent therewith or additional thereto.

2.2 No alteration, exclusion or waiver of any of these conditions shall be effective or binding unless made in writing by a Director of the Company. The Buyer acknowledges that it has not relied on any statement, promise or representation made or given by or on behalf of the Company which is not set out in this Contract and neither party has a remedy against the other party for any representations, statements or promises not set out in the Contract. Nothing in this condition shall exclude or limit the Company’s liability for fraudulent misrepresentation.

3 QUOTATION, ORDER AND ACCEPTANCE

3.1 Any quotation by the Company does not constitute an offer and is given on the basis that no Contract shall come into existence until the Company despatches an acceptance of the order to the Buyer. Any quotation given by the Company is valid for a period of 30 days only from its date, provided that the Company has not previously withdrawn it and may be revised or withdrawn at any time prior to the Company’s acceptance of the Buyer’s order.

3.2 Each order or acceptance of a quotation for Goods by the Buyer shall be deemed to be an offer by the Buyer to buy the Goods subject to these conditions.

3.3 The Buyer’s order, whether verbal or written, shall not be deemed to have been accepted until the Company has issued its written acknowledgement form and the Buyer’s credit has been approved by the Company or satisfactory security for payment has been given.

3.4 The Buyer shall ensure that the terms of its order and any applicable specification are complete and accurate. No order which has been accepted by the Company may be cancelled or varied by the Buyer except with the written agreement of the Company and on such terms that the Buyer shall indemnify the Company in full against all loss (including loss of profits), costs (including costs of labour, materials ordered or used, tooling and all manufacturing costs), damages, charges and expenses incurred by the Company as a result of such cancellation or variation.

3.5 The Company shall be entitled to suspend or end the provision of all or any part of the Goods or services to be provided to the Buyer under this Contract at any time where there is a monetary amount outstanding from the Buyer to the Company under any other Contract made between the Buyer and the Company for the provision by the Company of Goods or services.

4 DESCRIPTION

4.1 The quantity and description of the Goods shall be as set out in the Company’s acknowledgement of order

4.2 All samples, drawings, descriptive matter, specifications and advertising issued by the Company and any descriptions or illustrations contained in the Company’s catalogues or brochures are issued or published for the sole purpose of giving an approximate idea of the Goods described in them. They shall not form part of the Contract and this is not a sale by sample.

5 PRICES

5.1 The price payable by the Buyer for each Delivery of the Goods shall be the Company’s price ruling at date of despatch. The Company may at any time revise prices to take into account any increase in the Company’s costs (including, but not limited to the cost of raw materials, labour, energy, transport or other overheads, any tax due or other levy and variation in exchange rates).

5.2 Unless otherwise specified, VAT and any other tax or duties payable by the Company shall be added to the price payable by the Buyer.

6 DELIVERY AND COLLECTION

6.1 Delivery shall take place on a safe hard road, as near as legally permitted to the Buyer’s specified Delivery point as provided on the Buyer’s order form. The Buyer will be responsible for the costs and provision of safe off loading facilities and manual labour ensuring that Delivery is completed without undue delay or the Buyer will be liable to indemnify the Company for the Company’s costs incurred as a result of such delay.

6.2 Unless otherwise stated, all quotations assume Delivery in full loads by any method of transport at the Company’s option.

6.3 Any time or date for Delivery is given and intended as an estimate only and time for delivery shall not be made of the essence by notice. If no date for Delivery is specified, Delivery shall be within a reasonable time. The Company shall not be liable for any direct or indirect loss or damage (including, without limitation, pure economic loss, loss of profits, loss of business, depletion of goodwill and similar loss) costs, damages charges or expenses caused directly or indirectly by any delay in the Delivery of the Goods (even if caused by the Company’s negligence), nor shall any delay entitle the Buyer to terminate or rescind the Contract unless such delay exceeds 60 days from the original estimated Delivery date.

6.4 Signature on the Company’s delivery note by an employee, representative or agent of the Buyer shall be conclusive proof of the quantity received by the Buyer and of Delivery to the Buyer.

6.5 If the Company delivers to the Buyer a quantity of goods of up to 5% more or less than the order accepted by the Company, the Buyer shall not be entitled to object or reject the Goods or any of them by reason of the surplus or shortfall and the Buyer shall pay for such goods at the pro rata Contract rate.

6.6 The Company may make deliveries partially or by instalment. Each separate instalment shall be invoiced and paid for in accordance with the provisions of this Contract. Each instalment shall be a separate Contract and no cancellation or termination of any one Contract relating to an instalment shall entitle the Buyer to repudiate or cancel any other Contract or instalment.

6.7 When the Buyer arranges transport of the Goods from the Company’s place of business, Delivery shall take place at the Company’s place of business and the Buyer shall take Delivery of the Goods within 3 days of being given notice by the Company that the Goods are ready for delivery.

6.8 If for any reason the Buyer fails to accept Delivery in accordance with Clause 6.1 or 6.7, or the Company is unable to deliver the Goods on time because the Buyer has not provided adequate or appropriate instructions, documents licences or authorisations:

6.8.1 The Goods shall be deemed to have been delivered at the Buyer’s premises if the delivery is arranged pursuant to Clause 6.1. If delivery is arranged pursuant to Clause 6.7, Delivery will be deemed to have taken place at the expiry of 3 working days of the Company giving notice that the goods are ready for delivery;

6.8.2 Risk in the Goods shall pass to the Buyer (including for loss or damage caused by the Company’s negligence);

6.8.3 If the Buyer fails to take, or refuses to accept Delivery of any of the Goods the Company may charge for the refused delivery and any associated costs and may store the Goods until collection by the Buyer from the Company’s premises and charge the Buyer reasonable costs of storage, insurance and re-delivery or without affecting the continuation of the Contract, sell the Goods.

6.9 The Company shall not be liable for any damage, discrepancy non-Delivery or short Delivery of Goods (even if caused by the Company’s negligence) unless the Buyer gives written notice to the Company of the non-delivery within 3 days of the date when the Goods would in the ordinary course of events have been received.

6.10 Any liability of the Company for non-Delivery of the Goods shall be limited to replacing the Goods within a reasonable time or issuing a credit note at the pro rata Contract rate against any invoice raised for such Goods.

7 RETURNABLE PACKAGING

Pallets, stillages and special containers are returnable to the Company, and remain the property of the Company, they or equivalent like items shall be returned in good condition to the Company following delivery.

8 TECHNICAL DATA

All Company drawings, descriptive matter, price lists, brochures or advertisements whether or not supplied with a quotation or tender are approximate only and intended merely to give a general idea of the goods described therein and shall not form part of the Contract. Any tools, patterns and samples, unless paid for in full, and drawings, specifications or other information provided remains the Company’s property and all technical information, patentable or unpatentable copyright and registered designs arising from the execution of any orders are the property of the Company. They must not be copied, disclosed or given to any third party or otherwise used without written permission of the Company. Any research studies, quality enhancement or cost reduction measures shall remain the property of the Company and such information shall be kept confidential by the Buyer.

9 INDEMNITY

The Buyer shall indemnify the Company against all damages, costs, penalties and expenses arising out of or loss suffered as a result of any work carried out in accordance with the Buyers specification(s) as agreed in writing or any resultant infringement of a patent, design whether registered or unregistered, trade mark, copyright or any other industrial property right. If the Buyer uses, sells, causes to be sited or installed the Goods in such a manner as to infringe such rights the Company shall not be responsible for such infringement and the Buyer agrees to indemnify the Company from and against all liability arising there from.

10 VARIATIONS TO SPECIFICATION

The Company reserves the right to substitute goods of equivalent strength and quality without prior reference to the Buyer.

11 TERMS OF PAYMENT

11.1 Payment shall be received in full by the Company by the end of the month following the date of the Company’s invoice.

11.2 Time of payment is of the essence.

11.3 In the event of late or non-payment the Company shall be entitled to charge interest on such sum from the due date for payment at the annual rate of 4% above the base lending rate from time to time of Barclays Bank plc, accruing on a daily basis until payment is made, whether before or after any judgment. The Company reserves the right to claim interest under the Late Payment of Commercial Debts (Interest) Act 1998. In such circumstance any settlement discount will cease to apply and the full price shall be due and payable immediately by the Buyer to the Company.

11.4 The Company shall be entitled, at its discretion, to withdraw credit facilities and suspend deliveries at any time in which event all sums outstanding from the Buyer to the Company shall become due and payable immediately.

11.5 In the event of termination of the Contract for any reason whatsoever, all sums outstanding from the Buyer to the Company shall become due and payable immediately.

11.6 The Buyer shall not be entitled to withhold or delay payment or exercise any right to set off howsoever arising or arisen which might otherwise be available to it.

12 TITLE AND RISK

12.1 Goods supplied shall remain the property of Masefield Epson Ltd until all money due has been paid in cleared funds. Risk passes to the Buyer on Delivery.

12.2 Until payment of all money due to Masefield Epson Ltd the Buyer undertakes to:-

12.2.1 Hold the Goods on a fiduciary basis as the Company’s bailee; and

12.2.2 Keep the Goods stored separately (at no cost to the Company) and in such a manner as to make the Goods readily identifiable separate from all other and easily and clearly identifiable upon examination; and

12.2.3 Not destroy, deface or obscure any identifying mark or packaging on or relating to the Goods; and

12.2.4 Maintain the Goods in satisfactory condition and keep them insured on the Company’s behalf for their full price against all risks to the reasonable satisfaction of the Company. On request the Buyer shall produce the policy of insurance to the Company.

12.3 The Buyer may resell the Goods before ownership has passed to it solely on the following conditions:-

12.3.1 Any sale shall be effected in the ordinary course of the Buyer’s business at full market value; and

12.3.2 Any such sale shall be a sale of the Company’s property on the Buyer’s own behalf and the Buyer shall deal as principal when making such a sale; and

12.3.3 Any of the proceeds from the sale of the Company’s Goods shall be retained in a separate account by the Buyer.

Terms & Conditions of Sale


12.4 The Buyer’s right to possession of the Goods shall terminate immediately if:

12.4.1 the Buyer has a bankruptcy order made against him or makes an arrangement or composition with his creditors, or otherwise takes the benefit of any statutory provision for the time being in force for the relief of insolvent debtors, or (being a body corporate) convenes a meeting of creditors (whether formal or informal), or enters into liquidation (whether voluntary or compulsory) except a solvent voluntary liquidation for the purpose only of reconstruction or amalgamation, or has a receiver and/or manager, administrator or administrative receiver appointed of its undertaking or any part thereof, or documents are filed with the court for the appointment of an administrator of the Buyer or notice of intention to appoint an administrator is given by the Buyer or its Directors or by a qualifying floating charge holder (as defined in paragraph 14 of Schedule B1 to the Insolvency Act 1986), or a resolution is passed or a petition presented to any court for the winding-up of the Buyer or for the granting of an administration order in respect of the Buyer, or any proceedings are commenced relating to the insolvency or possible insolvency of the Buyer; or

12.4.2 The Buyer suffers or allows an execution, whether legal or equitable, to be levied on his/its property or obtained against him/it, or fails to observe or perform any of his/its obligations under the Contract or any other Contract between the Company and the Buyer, or is unable to pay its debts within the meaning of section 123 of the Insolvency Act 1986 or the Buyer ceases to trade; or

12.4.3 The Buyer encumbers or purports to in any way charges any of the Goods.

12.5 The Company shall be entitled to recover payment for the Goods notwithstanding that ownership of any of the Goods has not passed from the Company;

12.6 The Buyer grants the Company, its agents and employees an irrevocable licence at any time to enter any premises where the Goods are or may be stored in order to inspect them, or, where the Buyer’s right to possession has terminated, to recover them.

12.7 Where the Company is unable to determine whether any Goods are the Goods in respect of which the Buyer’s right to possession has terminated, the Buyer shall be deemed to have sold all Goods of the kind sold by the Company to the Buyer in the order in which they were invoiced to the Buyer;

12.8 On termination of the Contract, howsoever caused the Company’s (but not the Buyer’s) rights contained in this condition shall remain in effect.

13 QUALITY

13.1 The Company warrants all Goods which have been supplied by the Company against any defect of materials or workmanship arising within a period of 12 months of Delivery which can be proved to the Company’s satisfaction to have been caused before Delivery. The above warranty is given subject to the following conditions:

13.1.1 Full details of any such defect are notified to the Company in writing within 14 days of its first discovery.

13.1.2 The Goods have been properly used for their normal purpose, handled, maintained, stored and installed in accordance with the Company’s installation instructions and good practice;

13.1.3 The Company shall be under no liability in respect of any defect arising from any fair wear or tear, wilful damage, negligence, abnormal working conditions, failure to follow the Company’s instructions, whether oral or in writing, misuse or repair of the Goods without the Company’s approval; and

13.1.4 The Goods in which the defect arises are returned undamaged and adequately packed at the Buyer’s expense to the Company.

13.2 The liability of the Company shall be limited at its option either to supplying replacement Goods, which will be supplied subject to these terms, or refunding the price of the Goods.

13.3 The Company shall be under no liability under the said warranty if:

13.3.1 the Buyer has not paid in full for the Goods, or

13.3.2 the Buyer or his customer has executed or attempted to execute repairs or alterations to the Goods which are not authorised in writing by the Company or has failed in any other respect to adhere strictly to the terms hereof, or

13.3.3 the Company has not been notified of any defect within 14 days of the discovery of the defect, or

13.3.4 the Goods are returned to the Company inadequately packaged, in which event any damage to the Goods will be deemed to have resulted from the Buyer’s inadequate packaging and not from any defect in materials or workmanship; or

13.3.5 if the Buyer has used the Goods without first having carried out all the inspections and tests which the design and use necessitate, or

13.3.6 when any fault is attributable to the whole unit in which the Goods are incorporated or to any modification carried out after Delivery.

13.4 Except for the express warranties set out above, the Company grants no other warranties relating to defects in design, workmanship, or materials of the Goods and all other conditions, warranties, stipulations, or other statements whatsoever whether express or implied, by statute at common law or otherwise howsoever, relating to such defects in the Goods and services are hereby excluded

13.5 Where the Buyer notified the Company as aforesaid and the Company performs its obligations under these conditions the Buyer shall not be entitled to any claim in respect of the Goods, or for work done thereon, or any other costs or losses, direct or indirect or consequential and loss of profits whatsoever (save where death or personal injury has been caused by the Company’s negligence) nor shall the Buyer be entitled to repudiate the Contract, fail to pay for the Goods or cancel deliveries. The Buyer shall indemnify the Company against all costs of dismantling, digging out, replacement and reassembly.

13.6 Nothing in these conditions excludes or limits the liability of the Company:

13.6.1 for death or personal injury caused by the Company’s negligence; or

13.6.2 for any matter which it would be illegal for the Company to exclude or attempt to exclude its liability; or

13.6.3 for fraud or fraudulent misrepresentation;

13.7 Subject to the above condition:

13.7.1 The Company’s total liability in contract, tort (including negligence or breach of statutory duty) misrepresentation, restitution or otherwise arising in connection with the performance or contemplated performance of the Contract shall be limited to the Contract price;

13.7.2 the Company shall not be liable to the Buyer for any pure economic loss, loss of profit, loss of business, depletion of goodwill or otherwise, in each case whether direct, indirect or consequential, or any claims for consequential compensation whatsoever (howsoever caused) which arise out of or in connection with the Contract.

14 LIABILITY

14.1 The above warranty is limited to the supply to the Buyer free at his premises of the new Goods or parts in exchange for any acknowledged by the Company to be defective. The decision of the Company on all claims and all questions as to defects and as to the exchange of the Goods shall be final and conclusive.

14.2 The warranty above shall also apply to any replaced goods provided hereunder during the unexpired period applicable to the Goods for which the replacement has been performed.

14.3 Other than stated above, the Company undertakes no liability whatsoever in respect of the Goods sold by it and shall in no circumstances be liable in respect of loss, damage or delay, injury or expense, direct or consequential suffered at any time whether before or after the Goods may have been repaired or replaced, and howsoever caused, even if caused by negligence or breach of duty by the Company, its servants or agents. The terms set out herein are conclusive of the relationship between the Company and the Buyer and the Company shall be under no liability whatsoever by reason of any representation, statement or warranty, nor shall there be implied in any Contract of sale any term, condition or warranty statutory or otherwise. Nothing in these conditions shall affect the statutory liability of the Company for death or personal injury caused by negligence.

14.4 The Company undertakes no liability whatsoever in respect of operations subsequently carried out on products before their use, nor for cost of assembly, disassembly and withdrawal from service.

15 PATTERNS, TOOLS & DIES

15.1 Any patterns, core boxes, tools or dies (the Equipment) manufactured by or on behalf of the Company remain the property of the Company even though the Buyer may have been charged for part of the cost. Except for loss or damage caused directly by the Company’s negligence (for which the Company’s liability shall be limited to the direct cost of replacements or repair), the Company accepts no liability for loss or damage to the Equipment which is in the Company’s possession nor can it guarantee productive life.

15.2 Where the Equipment has not been used for a period of two years the Company may, after giving the Buyer one month’s notice in writing, dispose of it. In the event that the Equipment needs repair or replacement it will be undertaken by the Company only upon the basis that the Buyer contributes to the cost.

15.3 Where Equipment is provided by the Buyer he is responsible for ensuring that it matches the drawings and required specifications. If the Company carries out dimensional checks as requested by the Buyer it reserves the right to invoice the cost to the Buyer. In all cases if the Equipment received by the Company does not conform to the specifications the initially agreed price of the Goods may be revised.

15.4 All money due must be paid to the Company before Equipment is released to the Buyer or a third party.

15.5 Once manufacture of Equipment has commenced, cancellation cannot be accepted in any circumstances and any costs incurred must be paid by the Buyer in full. Equipment must be paid for in the month of delivery of samples even though subsequent modification may be required or the project is abandoned.

16 ASSIGNMENT

The Buyer shall not assign the Contract of which these Conditions form part or any part of it without the prior written consent of the Company. The Company reserves the right to subcontract the performance of the Contract or any part of it.

17 FORCE MAJEURE

The Company shall not be liable to the Buyer or be deemed to be in breach of the Contract by reason of any delay in delivery or any delay in performing or any failure to perform any of the Company’s obligations if the delay or failure arises directly or indirectly from any cause beyond the Company’s reasonable control. Without prejudice to the generality of the foregoing, the following shall be regarded as causes beyond the Company’s reasonable control: Act of God, explosion, epidemic, flood, storm, fire or accident; war or threat of war, terrorism, sabotage, insurrection, civil disturbance or requisition; acts, restrictions, regulations by laws, prohibitions or measures of any kind on the part of any governmental, parliamentary or local authority; import or export regulations or embargoes; strikes, lockouts or other industrial actions or trade disputes (whether involving employees of the Company or a third party); difficulty or increased expense in obtaining materials, labour, transport, fuel, parts or machinery; power failure or breakdown in machinery and equipment.

18 FREE ISSUE COMPONENTS

It is the Buyer’s responsibility to ensure that all components supplied by them for use in the products manufactured are fit for purpose and comply fully with the required specification. The Buyer will supply free issue in sufficient and timely quantities to allow for the Company’s production programme. The Company accepts no liability for failure of components supplied by the Buyer.

19 NOTICES

Any notice or communication given hereunder must be in writing and may be effected by personal delivery, facsimile, e-mail or by registered mail. If effected by personal delivery notices shall be deemed to be received on the date of such delivery, if by facsimile or email on the day of sending and if by post 48 hours after the date of posting.

20 LIEN

The Company shall in respect of all unpaid debts due from the Buyer have a general lien on all goods and property of the Buyer in its possession (although such goods or some of them may have been paid for) and upon 14 days written notice to the Buyer may dispose of such goods and property and apply the proceeds towards the satisfaction of the sums due to the Company.

21 INDULGENCE OR FORBEARANCE

The rights of the parties shall not be prejudiced or restricted by any indulgence or forbearance extended to them by the other party and no waiver by either party in respect of any breach shall operate as a waiver in respect of any subsequent breach.

22 DEFAULT OF BUYER (TERMINATION)

If the Buyer defaults in or commits any breach of any of its obligations to the Company, or ceases to carry out its business or a substantial part thereof, or if any distress or execution is levied on any of the Buyer’s property or the Buyer makes or offers to make any arrangement with its creditors or commits any act of bankruptcy, or if any resolution or petition to wind up the Buyer’s business is passed or presented or a receiver, liquidator or similar official is appointed of the Buyer’s undertaking, or any payment of the whole or any part of the purchase price of the Goods is dishonoured by the Buyer’s bank, then the Company shall be entitled forthwith to terminate this and any other Contract with the Buyer in writing to the Buyer’s last known address.

23 SEVERANCE

If any condition herein shall be deemed void for any reason whatsoever, but would be valid if part of the wording were deleted, any such condition shall apply with such modifications as may be necessary to make it valid and effective.

24 ENGLISH LAW

The Contract and these Conditions shall be governed by English Law and the Buyer shall submit to the sole jurisdiction of the English Courts.

Tel: 0121 557 3433 · Fax: 0121 520 6369 151

Tel: +44 (0) 121 557 3433 / +44 (0) 121 530 7000Fax: +44 (0) 121 520 6369

Email: [email protected]

Cronex295 Birmingham New RoadDudley, West MidlandsUnited KingdomDY1 4SJ Part of the Thomas Dudley Family

Documents

• Cistern/Tank Fittings • Pipe Fittings • Plumbing Brassware ......CONTENTS Washers & Seals 85HardwareCistern/Tank Fittings 91 Electrical 119Kitchen & Bathroom 539 Pipe Fittings