Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
The luminaire is best mounted in a range of 20 feet to 35 feet. ATG’s sales and technical representatives will help you choose which config-urations to specify for your project.
Luminous efficacy is rated for 120 lm/W or greater. L70 is an ex-ceptional 100,000 hours, equivalent to over 22 years of operation at 12 hours per day. The fixture will be available with input of 100-240/277VAC, and optional 347-480V drivers. Fixture is IP66 rated.
ConstructionThe Aero is built from die-cast aluminum. Core components of the luminaire, including the optics and LED arrays, are interchangeable via individual modules.
The Aero allows for quick, labor-efficient swapping of optics and LED arrays. Designers and contractors can now use the same product to deploy for a range of applications, without sacrificing appearance or durability. The luminaire has an operating temperature range of -20C to 45C.
Application
• IP65 rated and tested for use in wet locations• Allows for quick swapping of optics and LED arrays.• Best mounted at range of 20 to 35 feet.
Features
Electrical
Luminaire Aero Area Light Type
Project
Product
Notes
OpticsThe Aero is available with Type IV and V optics. Color accuracy is rated at 70+ CRI, in a color temperature of 5000K.
Certifications• DLC Premium• ETL• CE• RoHS• Title 24• IP65 rated
Order Format
Sample: AE10-50
Series Wattage CCT Voltage Finish Color
AE=Aero Area Light
10=100W15=150W24=230W32=310W
- 40=4000K50=5000K - Blank=100-277V
-V=347-480V Blank=Bronze
Input Voltage (VAC) 100-277, 347-480
CRI 70+
CCT(K) 5,000
PF >.92
THD <20%
L70 (Hours) >100,000
Color Bronze
Housing Die Cast Aluminum
Optic Types Clear
Temperature Range -40°C to 40°C
Warranty 10 Years
IP66 1-10V Dim Toxin-Free -40°C - 40°COperating
Photocell Motion Sensor
YearWarranty
AE Aero Area LightOutdoor
www.atgledlighting.comT: 951.245.6222E: [email protected]
© 2020 ATG LED Lighting. 10588 Monte Vista AveMontclair, CA
AE
Data subject to change. Last Edited: February 24, 2020 3:56 PM
Dimensions
Lumen Data
Part No. Length (L) Width(W) Height (H)
AE10 26.5 12 6.7
AE15 27.5 12 6.7
AE24 28.5 12 6.7
AE32 29.5 12 6.7Recorded in inches
L
W
H
Catalog Number SPD Distribution BUG EPA
AE10-XX 10KV Optional T3S B2U2G2 2.6
AE15-XX 10KV Optional T3S B3U2G3 2.8
AE24-XX 10KV Optional T3S B3U2G3 2.9
AE32-XX 10KV Optional T3S B4U3G4 2.9
Catalog Number Wattage (W) System Wattage
4K
T2 T4 T5
Efficacy (Lm/W) Lumens (Lm) Efficacy
(Lm/W) Lumens (Lm) Efficacy (Lm/W) Lumens (Lm)
AE10-40 100 97W 123 11965 123 11957 126 12261
AE15-40 150 150W 119 17890 123 18464 122 18358
AE24-40 240 211W 117 24703 123 25955 122 25806
AE32-40 320 303W 114 34772 123 37235 122 37021
Catalog Number Wattage (W) System Wattage
5K
T2 T4 T5
Efficacy (Lm/W) Lumens (Lm) Efficacy
(Lm/W) Lumens (Lm) Efficacy (Lm/W) Lumens (Lm)
AE10-50 100 97W 129 12595 129 12586 132 12907
AE15-50 150 150W 125 18832 129 19436 128 19324
AE24-50 240 211W 123 26003 129 27321 128 27164
AE32-50 320 303W 120 36602 129 39195 128 38970
Stock ItemATG Core Product
AE Aero Area LightOutdoor
www.atgledlighting.comT: 951.245.6222E: [email protected]
© 2020 ATG LED Lighting. 10588 Monte Vista AveMontclair, CA
AE
Data subject to change. Last Edited: February 24, 2020 3:56 PM
Sensor
BR1823Digital PIR Bi-level Sensor
Power Supply 120-277VAC 50/60Hz
Maximum Load -40°C-70 °C
Resistive/Tungsten - 600W@120VBallast Electronic (LED) -800/1200VA@120/277V
Dim Control Output 0-10V, max. 25mA sinking current
Detection Radius/Angle
30ft@40ft height/360 °
Mounting Height Max 24ft. @LW1 Max 40ft. @LS2
Remote Range 50ft. (15m) indoor, no backlight
Humidity Max. 95% RH
Temperature -40 °C - +70°C
Wiring
Ordering Information
BRl823-B-D wiring with dimming ballast or LED driver. Dimming Driver
LOAD(Red)
NEUTRAL(White)
Dimming Driver
GRAY(-)
VIOLET(+)
NEUTRAL(White) LINE(Black)
Catalog No. Color
□ BRl823-B-O-LW1 White
□ BRl823-B-O-LS2 White
□ BRl823-B-D-LW1 White
□ BRl823-B-D-LS2 White
□ RC-100 Black
BRl823-B-D wiring with non-dimming ballast or LED driver. Non-Dimming Driver
LOAD(Red)
NEUTRAL(White)
Non-Dimming Driver
NEUTRAL(White) LINE(Black)
Close En d Wire Connector
Description
ON/OFF Sensor,360° lens, maximum coverage 48' diameter from 8'-20' height
ON/OFF Sensor,360° lens, maximum coverage 60' diameter from 8'-40' height
Dimming Sensor,360° lens, maximum coverage 48' diameter from 8'-20' height
Dimm ing Sensor,360° lens, maximum coverage 60' diameter from 8'-40' height
Remote con trol Battery : AAA x 2
0
0
0
*see sensor specsheets for more info
0
0
0
BR
l823-B-D
Digital H
igh/Low
/Off Passive Infrared
Fixture Integrated O
utdoo
r Senso
r H
old
off setpo
int w
ith auto
matic
calibratio
n o
ption
for co
nven
ience
and
add
ed en
ergy savings
Fully adju
stable h
igh an
d lo
w
dim
med
light levels; o
ption
al d
usk to
daw
n con
trol
BR
l823-B-D
R
C-100
(OP
TIO
NA
L)
IP65 rated
for w
et locatio
ns
Mu
ltiple mo
unting o
ptions fo
r easy installatio
n
0
IP
RO
JEC
T
I LO
CATIO
N/TYP
E
Product O
verview
Descrip
tion
The BR
l823-B-D
mounts in an outdoor lighting
fixture and provides multi-level control based on
motion and/or daylight contribution. It controls
0-1 0 VD
C LE
D drivers or dim
ming ballasts, and
is rated for wet and cold locations.
All control param
eters are adjustable via aw
ireless configuration tool capable of storing andtransm
itting sensor profiles.
Op
eration
Typically, the sensor ramps lighting O
n to the selected High m
ode level when m
otion is detected and the am
bient light level is below the hold
off setpoint. After the sensor stops detecting
movem
ent and the time delay elapses, lights fade
to the Low m
ode level. If there is no motion during
the subsequent cut off time delay, the lights w
ill turn O
ff. For dusk to dawn control, the integral
photocell can switch the lights O
n and Off based on
the ambient light level so that lighting rem
ains on overnight even w
ithout motion detection.
Features .
Provides line voltage O
n/Off sw
itching and 0-1 0V
DC
dimm
ing control•
Works w
ith ballasts or LED
drivers•
High and low m
odes fully adjustable fromO
to 1 0V•
Time delay from
5 to 30 minutes
•O
ptional cut off delay•
Adjustable ram
p up and fade down tim
es
Specifications Power supply
120-277VAC
Wireless H
andh
eld Con
figuration
Tool Initial setup and subsequent sensor adjustm
ents are m
ade using a handheld configuration tool (R
C-100). This tool enables adjustm
ent of param
eter, is also used to initiate automatic
calibration of the BR
l823-B-D
ambient light level
setpoint. The setpoint is used to hold the controlled lighting off or at low
level when there is
sufficient daylight. The wireless tool stores up
to five sensor parameter profiles to speed
configuration of multiple sensors.
Ap
plication
s The slim
, low-profile B
Rl823-B
-D is designed for
installation inside the bottom of a light fixture
body. When fully assem
bled and installed in an IP
65-rated fixture, the PIR
sensor module parts
are IP65 outdoor rated. The sensor is ideal for
areas such as parking facilities, gas stations, pedestrian pathw
ays and warehouses. A
choice of tw
o PIR
Lens ensures complete coverage for
mounting heights up to 40'.
•C
LAS
S 2 for w
hole sensor•
Optional daylighting setpoints feature
automatic calibration, or perm
it manual
adjustment.
•P
olycarbonate, flame retardant, UV
resistant,im
pact resistant.•
UL773A
and FCC
Maximum load Resistive/Tungsten -600W
@120V @ -40'F -+158'F
(-40'C -+70'C) Dim control outout Detection radius/angle Mounting height Remote range Humidity Temperature
Ballast Electronic (LED)-800/1200VA@120/277V
0-10V max. 25mAsinkina current
30FT@40FT HeighU360'
Max 24ft. @LW1
Max 40ft. @LS2 50ft. (15m) indoor, no backlight Max. 95% RH -40'F -+158'F (-40'C -+70'C)
Daylight Sensor
Motion Sensor
Mounting
Square Mount
Square mount Round mount
Square mount Round mount
Round Mount
AE Aero Area LightOutdoor
www.atgledlighting.comT: 951.245.6222E: [email protected]
© 2020 ATG LED Lighting. 10588 Monte Vista AveMontclair, CA
AE
Data subject to change. Last Edited: February 24, 2020 3:56 PM
Photometric
.1
.2
.512
5
10
20
AE32-50-T4 @25’Replaces 1000W
.1
.2
.51
2
AE15-50-T4 @25’Replaces 250W
.1
.2
.5
1
2
AE15-50-T2 @25’Replaces 250W
.1
.2
.5 1 2
AE32-50-T2 @25’Replaces 1000W
.1
.2
.5
12
5
AE15-50-T5 @25’Replaces 250W
.1
.2
.51 2
5
AE32-50-T5 @25’Replaces 1000W
250W Replacement
Mounting Continued
Wall Mounting
1000W Replacement
AE Aero Area LightOutdoor
www.atgledlighting.comT: 951.245.6222E: [email protected]
© 2020 ATG LED Lighting. 10588 Monte Vista AveMontclair, CA
AE
Data subject to change. Last Edited: February 24, 2020 3:56 PM
ATG Electronics®Industry Leading 10 Year Limited WarrantyFor North American LED Lighting Fixtures
ATG Electronics warrants to the original purchaser of ATG Electronics Domestic LED products listed above that were manufactured for which the ATG Electronics Spec Sheet located on our website contains the words “10 year limited warranty” that, subject to the below terms and conditions of this warranty, when such LED products are properly installed they will comply with ATG Electronics published product specifications for such products and will be free from material defects in material and workmanship for a period of ten (10) years from the date of sale by ATG Electronics, or, if lesser, 50,000 hours of operation (at an average of 13.6 hours per day operation). The LED arrays in the Product(s) will be considered defective in material or workmanship only if a total of 15% or more of the individual light emitting diodes in the Product(s) fail to illuminate.
The above express limited warranty is extended by ATG Electronics® only to the original or first end-user purchaser and only for the original installed location. This warranty only applies to prod-ucts purchased after June 1, 2017. This warranty is non-transferrable, whether by assignment or operation of law. The original purchaser must provide warranty claims to ATG Electronics within the warranty period promptly upon discovery and in accordance with ATG Electronics Return and Repair Procedures as outlined within this document.
Should any defects be found by ATG Electronics upon its inspection of the properly returned product, ATG Electronics sole responsibility and liability under this warranty will be, at its option, to ei-ther repair or replace the defective part or parts or else make available a new replacement unit that will provide equal or better performance. All decisions regarding the existence or non-existence of defects or otherwise affecting the warranty shall be made by ATG ELECTRONICS and shall be final and binding on all parties. Where a defective LED product is replaced under this warranty, the balance of the original warranty period shall remain effective.
Conditions and Exclusions
This warranty is conditioned upon proper installation, use and maintenance. This warranty will automatically become null and void and shall not be applicable to any LED fixture which (i) has not been timely paid for, (ii) is not installed and operated in accordance with the current edition of The National Electric Code (NEC), the Standards for Safety of Underwriters’ Laboratory, Inc. (UL) or with ATG Electronics instructions and guidelines, (iii) has been moved from its original installation, (iv) has been installed within an area that has exposure to sulfur or any area with high acidic compounds in use, (v) has been operated in an ambient temperature or humidity that is higher than 35 degrees Celsius, (vi) has been subjected to a lightning strike, power surge or overvoltage condition, (vii) has its LED Board subjected to static electricity due to failure to discharge same prior to connecting or disconnecting the lead from the LED board, (viii) was not installed and/or operated in accordance with ATG Electronics instructions and guidelines, (ix) has been mishandled, misused, abused, tampered with, modified or altered by anyone other than ATG ELECTRONICS, (x) has been subjected to abnormal stresses and operating conditions, or (xi) has been operated without overvoltage and lightning protection devices in place.
Limitations
Disclaimers & Limitations of Liability
The foregoing warranty is exclusive of all other statutory, written or oral warranties and no other warranties of any kind, statutory, by operation of law or course of performance, or otherwise, are given, herein expressed or otherwise received. EXCEPT AS EXPRESSLY PROVIDED ABOVE, ATG ELECTRONICS DISCLAIMS ALL REPRESENTATIONS, WARRANTIES AND CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED, REGARDING THE LED PRODUCTS AND ITS SERVICES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE OR PURPOSE.
LIMITATION OF LIABILITY. Other than the obligation to repair or replace as provided above, ATG Electronics shall have no liability for any losses, expenses or damages as a result of the installation, use, inability to use, removal or replacement of any LED product. ATG Electronics will not under any circumstances whether as a result of breach of contract, breach of warranty, tort, strict liability or otherwise be liable for consequential, incidental, special or exemplary damages including but not limited to, loss of profits or revenues, loss of any other goods or associated equipment or damage to any associated equipment, cost of capital, cost of substitute products, facilities or services, down time cost or claims of claimant’s customers. ATG Electronics liability on any claim of any kind for any loss or damages arising out of, resulting from or concerning any LED product, any aspect of this warranty or for any products or services furnished hereunder shall not exceed the price of the fixture which gives rise to the claim.
Return and Repair Procedures
All warranty requests and or questions are to be directed to ATG Electronics Customer Service Department (CSD) at 888-618-7298. If deemed necessary, the CSD will issue a Returned Merchandise Authorization (RMA) number which must be included on both the packing slip of the component or fixture being returned and on the outside of the box. You must include your name and contact information, including your email address, on the packing slip so that we can contact you easily. Each component or fixture must be packaged very carefully and properly so as to prevent damages in shipment and must be shipped freight prepaid. Please obtain a proof of delivery to ensure that the material is received.
Once the component or fixture has been received and tested, an evaluation report will be provided to the end user via email. This report will clarify the following:
A) The component / fixture is covered under the warranty policy and will either be repaired or replaced.B) The component / fixture is not covered under the warranty policy and the reason for this determination.
If ATG ELECTRONICS determines that the component or fixture is covered under the warranty, then the appropriate repairs will be started or a replacement fixture will be manufactured and shipped. Please note that in the event the returned component or fixture is found not to be covered under this warranty, you may be subject to a labor charge for the evaluation process and will be responsible for all return shipping charges and fees. For components and fixtures determined to be covered under this warranty prior to the first anniversary of the Sale Date, the repaired or replacement component or fixture will be returned to you at no charge. You will be responsible for all other shipping charges.
No Labor Reimbursement
All components and fixtures determined to be covered by this warranty as provided above, will be repaired or replaced at no charge to the customer, however, except as expressly provided above with respect to recessed and linear fixtures during the first year, the customer must hire and pay for an electrician to remove and reinstall such components and fixtures. No labor costs will be covered for the removal or reinstallation of any components or fixtures. The warranty does not cover modifications, repairs or replacements, or the related labor or materials costs, that may be necessary to facilities or third party products in connection with the removal, repair, or replacement of any LED product under this warranty.
10 Year Warranty
AE Aero Area LightOutdoor
www.atgledlighting.comT: 951.245.6222E: [email protected]
© 2020 ATG LED Lighting. 10588 Monte Vista AveMontclair, CA
AE
Data subject to change. Last Edited: February 24, 2020 3:56 PM