Embed Size (px)
Citation preview
Guaranteestime andcost savings
A 8001/... HASCO Clamping fixture
HASCO Hasenclever GmbH + Co KGRömerweg 4, D–58513 LüdenscheidT +49 23 51 957-0, F +49 23 51 [email protected]
Download of CAD fileswww.hascoshop.com
www.hasco.com
– Cost-efficient clamping of HASCO system plates (K-plates, ejector plates as well as plates of the Small series mould K 3600 /. . .).– Problem-free horizontal and vertical machining of all common mould dimensions.
– Easy handling through separate accessory plug-in modules classified by system diameter.– Minimal set-up times through the use of coloured plugs to mark the hole positions for the system plates.– Corrosion-resistant device base plates in stainless steel and DLC-coated functional elements guarantee minimal wear and a long life.– Special customised versions available.
– High-precision positioning of the location elements through very tight tolerances, ensuring a repeat accuracy of 10 µm.– Expanding collet clamping in the system holes permit optimum 5-side processing.
Accessoryplug-in module
09 14 1 2 o16 Subject to technical modifications. Please always check all the data against the product information we publish in the internet.
Clamping possibilities
A 8022 /...A 8023 /...
A 8001 /... A 8031/...
A 8031/... A 8001 /...
A 8001 /... A 8031/...
A 8001 /... A 8031/...
A 8012 /...
A 8010 /...
A 8020 /...
Z 31 /...
A 8012 /...
A 8011 /...
A 8012 /...
A 8010 /...
A 8010 /...
A 8010 /...
A 8016 /...
A 8019 /...
A 8021/...
A 8015 /...
A 8022 /...A 8023 /...
Clamping of HASCO ejector plates K 60 and K 70
Clamping of K-plates for lateral processing
Clamping of K-plates withlocking washer A 8020 /. . .
Clamping of K-plates with expansion elements (A 8022 /... , A 8023 /...)in the guide holes
Use of support element A 8015/. . .
www.hasco.com
