Upload
sajeeray
View
1.813
Download
2
Tags:
Embed Size (px)
DESCRIPTION
Venue: Holiday Inn, Surfers Paradise, Gold Coast, Queenslandvisit: www.materialsaustralia.com.au
Citation preview
OPERATING PRESSURE EQUIPMENT INCORPORATING THE AINDT BIENNIAL CONFERENCE
26‐28 August 2009
Holiday Inn, Surfers Paradise, Queensland, Australia
www.materialsaustralia.com.au/OPE09
9TH INTERNATIONAL CONFERENCE & EXHIBITION 2009
P la t inum Sponso r
The Ninth International Conference on Operating Pressure Equipment (OPE) incorporating the Biennial AINDT Conference is scheduled for 26‐28 August 2009 on the vibrant and exciting Gold Coast of Australia. OPE is one of the most successful international engineering conferences run in Australia. The eight previous Australian conferences have attracted hundreds of delegates from Australia and around the world. This conference will allow AINDT to promote the co‐operation between companies, government bodies and individuals in the study and development of non‐destructive testing methods and techniques. Because of the synergy between NDT and the safe operation of pressure equipment this event presents an opportunity to foster further understanding across a wide range of both industry sectors.
AIM
The conference aims to update and expand research cooperation and industrial knowledge in the wide area of piping, pressure vessels, valves and non‐destructive testing, and engineering analysis. The conference has a tradition of industry/research interaction with important international contributions and an emphasis on practical applications.
BACKGROUND
Pressure vessels and pipework are the heart of most industrial activities. They are costly and complex pieces of infrastructure which need to be designed, built, operated, inspected, repaired and decommissioned to the highest standards. The demands on technology are high. • New demands are being made on environmental, safety and energy conservation issues resulting in higher
temperatures and pressures and more demands on integrity • New processes demand more consideration of corrosion and chemical attack • Failures and leaks of pressure equipment are significant safety and cost factors such that understanding leading to
prevention is critical • Unscheduled outages often cost millions of dollars a day • In much of industry the pressure equipment is aging and plant life is pushed well beyond original design
considerations. • Many plants are now required to operate at extremely high levels of availability with very limited time available for
inspection and maintenance.
TECHNICAL FOCUS
Achieving high reliability with restricted maintenance opportunities through: • Design and manufacture • Inspection and testing • Welding, gaskets and bolted joints • Coatings, corrosion, chemical attack • Creep, fatigue • Life monitoring & assessment, failure analysis & recovery • Health and safety, risk analysis • Management of assets, insurance
WHO SHOULD ATTEND
Engineers, Managers, Researchers, Consultants, Regulatory Authorities, Inspection Personnel, NDT Personnel. Industries: Oil, Gas, Petro‐chemical, Electricity, Long distance piping, Mineral processing industries: Alumina, Nickel, Steel, Heating and process steam, Gas and fluid transport, Portable cylinders, Regulatory authorities, Welding contractors and suppliers, Non‐destructive testing suppliers and practitioners, Boiler and pressure equipment designers and manufacturers, Universities and Research and development organisations. Legal/Management: Health and safety, Insurance, Risk assessment, Asset Management, Economics of Maintenance, Standards, Insurance.
OPE/AINDT 2009 Introduction
OPE/AINDT 2009 Workshops
NDT WORKSHOP Dr Baldev Raj Indira Ghandi Centre for Atomic Research, India The workshop will be held on day two of the Conference and take the form of a discussion group covering issues faced by both the NDT service providers and organisations seeking specialist services when new technologies are introduced. Advances of digital technology have led to advanced NDT techniques such as LRUT, PA, TOFD, Array ET, Magnetic Bias, Digital and computerised RT & Pulsed ET to name a few. The workshop shall focus on, but is not limited to, the follow‐ing topics: • Sensor and Software Development for UT Phased Array • Reliability and System Integrity • Standards and Codes (Manufacturing Standards have not kept up with the new techniques) • Training by equipment manufacturers • Certification Investment in technology is high. As with computers technology development is rapid and equipment quickly becomes redundant and needs to be replaced. Service providers in small countries like Australia and NZ find this technology ex‐tremely expensive to buy into. Service providers need guarantees that they have the work before they invest in this technology. We have an ageing workforce and we need initiatives to recruit young people into the profession who are capable of providing the NDT Technology service expected by industry. How can this be accomplished cost effectively? Companies seeking these services are forced to pay high prices for these services and sometimes need to bring in peo‐ple from overseas to meet deadlines because the service can't be provided locally. An example of what is happening in some cases to overcome the technology gap which in the long term undermines industry confidence in the new technology: Example: There are companies in Australia that will do a job that requires specialist experience but they don't
necessarily have that experience. e.g. they will do TOFD on reactor welds but they don't do TOFD on reactor welds as a speciality.
Open floor discussion with a panel made up of equipment suppliers and system experts.
WTIA INDUSTRY SKILLS WORKSHOP Mr Chris Smallbone, Executive Director WTIA, President International Institute of Welding 2005‐2008. The current global economic downturn is providing companies with the stimulus and opportunity to review their busi‐ness efficiency and to focus on their positive assets, particularly their skilled personnel. Knowing that the cycle will turn again, astute companies are loath to lose their key staff, and are looking for ways to utilise them the best. They also recognise that if there was a skills shortage a year ago, there is still a skills shortage today, and this needs to be ad‐dressed by training for the future of the industry. The pressure equipment and inspection industries are similarly affected by the current economic situation, and have also suffered from attrition of skilled and experienced workers through retirement and retrenchment, and a lack of young people entering the industry. This workshop will provide a forum to discuss the challenges and issues facing the sector in terms of its workforce, and potential solutions that can be put in place. Examples of programmes overseas to improve the image of roles within the industry will also be reviewed. In interactive workshop format will enable all delegates to participate and share in the outcomes of the event.
OPE/AINDT 2009 Keynotes and Exhibitors
With the aim of updating and expanding research cooperation and industrial knowledge in the wide area of piping, pressure vessels, valves and non‐destructive testing, and engineering analysis, the conference will include industry/research interaction with important international contributions and an emphasis on practi‐cal applications. In a coup for organisers, they have managed to secure some outstanding speakers for the event in the following areas:
Non‐destructive Testing: Dr Baldev Raj, Director, Indira Ghandi Centre for Atomic Research Kalpakkam Tamil Nadu, India. John Thompson, BINDT, UK Mike Farley, President ICNDT, UK
Gas Pipelines: Professor Sonja Felber, Professor, Institute for Building Construction and Technology, Vienna University of Technology, Austria.
Power Industry Update: Dr Bilal Dogan, Senior Project Manager, Electric Power Researcher, Charlotte, North Carolina, USA.
Repairing Old Material: Dr Steve Brett, Corporate Engineer in Materials and Welding, RWE Npower, Swindon, UK.
Fitness for Service: Dr Mustafa Koçak, GKSS Research Centre, Institute for Materials Research, Department of Joining and As‐sessment, Geesthacht, Germany.
Design of Advanced Vessels: Dr S.C. Chetal, Director, Reactor Engineering Group for the 500 MWe Prototype Fast Breeder Reactor (PFBR), Kalpakkam, India.
Tubular Materials: Dr Augusto Di Gianfrancesco, Senior Metallurgist, Metallurgy for Energy and Mechanical Application Depart‐ment, Centro Sviluppo Materiali S.p.A., Rome, Italy.
Weld Failures: Dr Peter Mayr, Assistant Professor Graz University of Technology Institute for Materials Science and Welding, Graz, Austria.
Welding Technology: Mr Chris Smallbone Executive Director WTIA, President International Institute of Welding 2005‐2008. For a more information on our Keynote Speakers please go to: www.materialsaustralia.com.au/OPE2009. EXHIBITORS While at the conference you will also be able to view the latest technology from : HRL Technology Pty Ltd, GL Industrial Services Pty Ltd, Russell Fraser Sales Pty Ltd, Krautkramer Australia Pty Ltd, PearlStreet Ltd, Chemetall Australasia, Silverwing (UK) Pty Ltd, Australian NDT Sales Pty Ltd, Innov‐X Systems Australia., NDT Equipment Sales, Austpower Engineering Pty Ltd, Malbar Thermal Imaging, GE Sensing and Inspection Technologies, Olympus, Bureau Veritas and Attar .
OPE/AINDT 2009 Venue
HOLIDAY INN SURFERS PARADISE 22 View Avenue
Surfers Paradise, Queensland, Australia Holiday Inn Surfers Paradise is located on the Gold Coast in the heart of Surfers Paradise; surrounded by shops, restaurants, cafes, nightlife, attractions and only 100 metres to patrolled beaches. After a $15 million revitalisation in early 2007 the hotel offers guests modern facilities in a fun, fresh and vibrant atmosphere. All of the hotel’s 404 refurbished accommodation rooms boast space and style and feature a large flat screen television with selected free Foxtel channels, a generous work area with high speed internet connection, red earth amenities, pillow menu, free in‐room safe and a private furnished balcony with Surfers Paradise or ocean views. The hotel’s restaurant Sirocco, offers an innovative marriage of flavours with distinctive Mediterranean and seafood influences, in both a la carte and buffet dining. The hotels 24 hour room service menu gives you the flexibility to dine in the comfort of your room. The hotel offers an excellent choice of conference and event facilities over 2 levels incorporating 2 ballrooms and 9 venues which can cater up to 600 delegates. A 24 hour fully equipped business centre is also available. Relax by the hotels swimming pool and spa, be pampered in the day spa or enjoy a workout in the studio gymnasium. Holiday Inn Surfers Paradise’s bold new look, coupled with its ideal location in the heart of Surfers Paradise, makes the hotel the perfect choice for both business and leisure. Relax. It’s Holiday Inn. ACCOMMODATION BOOKINGS AND PAYMENT A special conference rate of $155.00 (Room only) for a standard room at the Holiday Inn is available through Conference Works. To book please complete the booking from including credit card details at the back of this registration flyer and fax it to Kimberley at Conference Works on +61 3 9870 1723. Delegates must settle the balance of their account with a credit card at their relevant hotel on checkout. The hotels reserve the right to charge one night's accommodation deposit on your card. Alternative accommodation options are available to suit any budget, if you would like another option please contact Kimberley on +61 3 9870 2611 or email: [email protected]. CHANGE OF RESERVATION Changes to your reservation can only be made by contacting Kimberley at Conference Works, not the Hotel. Kimberley should be notified in writing of any required changes to hotel reservations. CANCELLATIONS In the event of a room being cancelled without notice, a cancellation fee of one night’s accommodation per night for the confirmed booking will be charged. Any rooms cancelled within 48 hours prior to arrival will be subject to 100% cancellation fees.
Surfers Paradise is the jewel of Queensland's Gold Coast and one of the most popular holiday destinations in Australia. Surfers Paradise is where you'll find the perfect fusion of city and beach lifestyles set amidst a spectacular skyline and brilliant stretch of coast. Once you arrive, you'll soon feel that you've literally arrived in paradise.
Surfers Paradise invites exploration. Whether it's through the winding streets lined with alfresco dining res‐taurants or the art galleries that showcase local artists' works and Aboriginal exhibitions. There's the unend‐ing shopping options from top‐end designers to outlet bargains and nighttime beachfront markets. Surfers Paradise is enticing in every way imaginable.
And the next day when you're tired from all of the action, grab your towel and hit the beach. Learn how to surf or watch the pros make it look so easy. So now, it's time for you to come to experience 'Australia's play‐ground' for yourself...Surfers Paradise.
Nearest Highway: Gold Coast Highway Nearest Airport: Gold Coast ( 21 Kilometres ) QUEENSLAND WEATHER Warm summers and mild winters are what you can expect in this subtropical destination. Average summer and winter temperatures range from 9°C ‐ 29°C in Brisbane and 17°C ‐ 31°C in Cairns. You won't find any place that gets much colder than 1°C, even in the hills of South East Queensland Country. That's what Queenslanders call perfection. MORE INFORMATION If you require any further information on Surfers Paradise or Queensland in general please go to: www.queenslandholidays.com.au GETTING THERE Whether you're arriving from interstate or flying in from overseas, getting to Queensland is easy. Most inter‐state travelers have the choice of flying to Queensland with Qantas, Virgin Blue or Jetstar. Flights to major towns are frequent and regional airports are dispersed throughout the state. Gold Coast Airport (OOL‐Coolangatta) Gold Coast Airport is located on the Gold Coast Highway at Bilinga (close to Coolangatta) on the southern end of the Gold Coast. • It is 30 minutes’ drive from Surfers Paradise. • Surfside Buslines and Gold Coast Tourist Shuttles offer convenient transfers to hotels and theme parks.
The free Airport Link shuttle takes you straight to the Gold Coast Highway, where public transport is readily available.
• Car rental companies can be located opposite the check‐in counters at the airport. • Taxis are available immediately outside the terminal. Brisbane Airport Brisbane Airport is a 15 km or 20 minute drive from the CBD, or about 25 minutes by AirTrain, which also continues on to the Gold Coast. • The AirTrain runs every 30 minutes from 6am to 7pm every day and connects to Central station. • The domestic terminal is separate from the international terminal, but AirTrain provides a 5‐minute
connection. • There are shuttle buses which provide direct hotel transfers, and plentiful taxis and hirecar providers. • Brisbane Airport provides a handy map of flight routes and general timetables.
OPE/AINDT 2009 Surfers Paradise
OPE/AINDT 2009 Provisional Program
Wednesday 26th August 2009
8:00‐8:45 Registration
8:45‐9:00 Conference Opening
9:00‐9:45 Keynote: Advanced NDE for Pressure Vessels and Piping: Dr Baldev Raj, Indira Ghandi
Centre for Atomic Research, India
9:45‐10:30 Keynote: European Fitness‐For‐Service Procedure: Dr Mustafa Koçak, GKSS Research
Centre, Institute for Materials Research, Germany
10:30‐11:00 Exhibition Opening and Break
Advanced NDT
11:00‐11:20 Alex Wilson Memorial Lecture: Ken Brown, Australia
11:20‐11:40 Life Extension of CNG Storage Cylinders using Acoustic Emission: Dr Gary Martin, Marcus
Brache, Simon Langdon and David Padfield, ATTAR AE, Australia
11:40‐12:00 A New, Improved Pipeline AUT Girth Weld Inspection System: Michael Moles, Olympus
AUT, Canada
12:00‐12:20 Case Study: Applying Risk Based Inspection to Petroleum Fuel Refineries Pressure Vessels:
Jenny Simpson, Caltex Refineries (NSW) Pty Ltd, Australia
12:20‐1:15 Lunch
Fitness for Service
1.15‐2.00 Keynote: Most critical Failure Modes in Weldments of Martensitic Heat Resistant Steels and their Possible Prevention: Dr Peter Mayr, Graz University of Technology, Austria
2:00‐2:20 A Risk‐Based Piping Integrity Management System – Covering the Forgotten Link in Pressure Equipment Management: Michael C. Adams, Ionik Consulting, Australia
2:20‐2:40 Fitness for Service Assessment of a Large Vacuum Tower: David Mair, WorleyParsons,
Australia
2:40‐3:00 Reporting on Plant Condition ‐ The Big Picture: Quentin Gryl, Dr Robert Frith, Frith Engi‐
neering, Australia
3:00‐3:30 Break
Fitness for Service/Creep
3:30‐3:50 Life Cycle Integrity and Inspection Management: Dr Chris Smith Applus RTD WA, Australia
3:50‐4:10 High Temperature Remaining Life Cost Assessment: Warwick Payten, Phil Bendiech, Ken
Snowden, ANSTO, Australia
4:10‐4:30 A Strain Energy Based Methodology for the Prediction of Creep Fatigue Damage in High
Temperature Components: Phil Bendiech, Warwick Payten ANSTO, Australia
4:30‐4:50 Life Prediction of Pressure Components Subjected to Elastic‐Plastic‐Creep Damages:
Khosrow Zarrabi UNSW, Australia
4:50‐5:10 Comparison of the Theta and Omega Methods for Extrapolating Creep Data: M Listmangof,
Russell Coade HRL Technology Pty Ltd, Australia
5:10‐5:30 Inspection and Fitness for Service Assessments of Pressure Equipment: Chris Jones,
Annette Karstensen, Quest Reliability, Australia
5:30‐7:00 Welcome Reception
OPE/AINDT 2009 Provisional Program
Thursday 27th August 2009
8:00‐8:45 Registration
8:45‐9:00 Keynote: International Alignment of Certification Programs: Mike Farley President ICNDT, UK
9:00‐9:45 Keynote: Creep‐Fatigue Interaction and Assessment of Plant Components: Dr Bilal Dogan,
Electric Power Researcher in Charlotte, USA
9:45‐10:30 Keynote: High Grade Pipeline‐Steels and Welds: Prof Sonja Felber, Vienna University of
Technology, Austria 10:30‐11:00 Break
NDT/UT
11:00‐11:20 Phased Arrays – Where Do We Stand?: Michael Moles, Olympus, Canada
11:20‐11:40 Rapidscan: Invention and Evolution of an Array based Ultrasonic Scanning Technique: Joe Buck‐
ley, Tom Marshall, Sonatest, UK
11:40‐12:00 Ultrasonic Detection and Measuring of Isolated or Pitting Corrosion (IPC): Paul Grosser, ATTAR,
Australia
12:00‐12:20 Phased Array Compliance to Standards for Defect Detection: Alan Guo, John Price, Bruce Ham,
Nick Kriesl, Raman Singh, HRL and Monash University, Australia 12:20‐1:15 Lunch
NEW NDT
1.15‐2.00 Keynote: Compensating for Variations in Material Properties in Remote Field Testing of Heat
Exchanger and Boiler Tubes: Ankit Vajpayee, Russell N.D.E. Systems Inc., Canada
2:00‐2:20 CrackSizer®: An Electromagnetic Inspection Technique for Detecting and Sizing Cracks, and Identifying Changes in Hardness: M. Baxter, C. Dean, B. Ham, J Price, HRL and Monash
University, Australia
2:20‐2:40 Malbar Thermal Imaging, Mal Campbell Malbar Thermal Imaging, Australia
2:40‐3:00 Inspection of Fired Heater Coils Utilizing FTIS Intelligent Pigging Technology: Rich Roberts,
Quest Tru Tec, USA 3:00‐3:30 Break Break
NDT Design
3:30‐3:50
Acoustic Emission Monitoring of High En‐ergy Piping: Alan Beveridge, Loy Yang Power, Bruce Ham and Nick Kriesl, HRL Technology Pty Ltd, Leon Rosenbrock,
WTIA, Australia
Keynote: Stainless steel design for reactors Dr SC Chetal, Prototype Fast Breeder Reactor (PFBR),
India
3:50‐4:10 Promoting a Safety Culture in Industrial Radiographythrough a Code of Conduct:
Colin Hockings, Qantas, Australia
4:10‐4:30
Equipment Demonstration by Exhibitors to all interest NDT practitioners.
Vanadium Modified 21/4Cr‐1Mo Reactor Fabrica‐tion: Les Antalffy, Cathleen Shargay, Dennis
Smythe and Karly Moore Fluor, USA
4:30‐4:50 Mechanical & Corrosion Design of Heat Exchang‐
ers: Peter A McGowan, Orica Engineering, Australia
4:50‐5:10 New Design Strengths for AS1210 Pressure Ves‐sels: Stan Ambrose and Chris Killmore, WTIA/
BlueScope Steel, Australia
5:10‐6:30 Advances in NDT Workshop
Chair: Baldev Raj Skills Workshop
Chair: Chris Smallbone
7:00‐10:30 Dinner
OPE/AINDT 2009 Provisional Program
Friday 28th August 2009
8:00‐8:45 Registration
8:45‐9:00 Keynote: Satisfying NDT Personnel Requirements of the European Pressure Equipment Directive John
Thompson BINDT, UK
9:00‐9:45 Keynote: Cracking Experience in CrMoV Steam Pipework Systems Dr Steve J Brett, RWE Npower, UK
9:45‐10:30 Keynote: Recent Development in Relevant Commissions of the IIW, Chris Smallbone WTIA, Australia
10:30‐11:00 Break
Welding/NDT
11:00‐11:20 A Case Study on the Effect of Peaked Pipe Welds on Piping Life Expectancy: Warren Brown, Equity
Engineering, Martin Prager, MPC and Sarah Wrobel, Citgo, USA
11:20‐11:40 Case Study of Successful Weld Repair of Storage Tank: Sasanka Sinha, Stan Ambrose WTIA, Australia
11:40‐12:00 Measurement of Residual Stress in Repair Welds with Consideration of Stringer and Temper Bead Procedures: John Price, Monash University, Anna M. Pardowska, ISIS, UK, Trevor R. Finlayson,
Melbourne University, Australia
12:00‐12:20 Measurement of Residual Stress in a Welded Branch Connection and Effects on Fracture Behaviour: Michael Law, ANSTO, P Grace, Jemena, Stan Ambrose, WTIA, V Luzin, ANSTO, Oliver Kirstein, ANSTO,
Australia 12:20‐1:15 Lunch
Chromium Steels
1.15‐2.00 Production, Properties of Base Material and Welded Joints of 9% Cr Grades for USC Power Plant: S.
Caminada, G. Cumino: L. Cipolla, Augusto Di Gianfrancesco, TenarisDalmine, Centro Sviluppo Materiali, Italy
2:00‐2:20 Examination of Overheated P91 Material: D.S. O’Neill, HRL Technology Pty Ltd, Australia
2:20‐2:40 Simulation of HAZ Sub‐Zone Microstructures in P92 Steel: D Sunjaya, Michael Drew, H Li and D Dunne,
ANSTO, Australia
2:40‐3:00 Issues in the Use of P91 Creep Strength Enhanced Ferritic Steel: Michael Henry, Julian Van Der Kley,
PearlStreet, Australia 3:00‐3:30 Break
Damage and Repairs NDT
3:30‐3:50 WTIA Australian Power Technology Group, Alan
Beveridge, Loy Yang Power, Australia
Condition Monitoring (Trending) Histograms, Iso‐therms and Angle of View, Tony Rolland,
Thermoscan™ Inspection Services Pty Ltd, Australia
3:50‐4:10 Refurbishment
Testing the Integrity of Refractory Concrete Struc‐tures using the P‐Response NDT Technique, Greg Palmer, KC Tan, Palmer Technologies Pty Ltd,
Australia
4:10‐4:30
Thermo‐mechanical Manipulation of Crack‐tip Stress Field for Resistance to Stress Corrosion Crack Propagation: Raman Singh, R.N. Ibrahim,
F. Wu and R. Rihan, Monash University, ustralia
TBC
4:30‐4:50
SCC Failure of a High Pressure, High Temperature 316L Quench Water Line: Roger Griffiths, BP Refinery (Bulwer Island) Pty Ltd,
Australia
TBC
4:50‐5:10
Behavior of Z‐phase in 9‐12%Cr Industrial Steels: J. Hald, R. Blum: H. Danielsen: Augusto
Di Gianfrancesco, L. Cipolla, D. Venditti: S. Caminada, G. Cumino, TenarisDalmine Centro
Sviluppo Materiali S.p.A, Italy
TBC
5:10‐5:30 Temper Bead Welding
5:30‐7:00 Closing panel
OPE/AINDT 2009 Accommodation Booking Form
26 – 28 August 2009 Holiday Inn Surfers Paradise
Title ______________ First Name _______________________ Last Name __________________________ Address ______________________________________________________Suburb ____________________ Postcode ___________________ Email _______________________________________________________ Phone ____________________________ Fax ________________________ Mobile ____________________ PLEASE NOTE: Accommodation is based on availability at the time of booking. Holiday Inn Surfers Paradise (Conference venue) 22 View Avenue, Surfers Paradise, Queensland, Australia Holiday Inn Surfers Paradise is located on the Gold Coast in the heart of Surfers Paradise; surrounded by shops, restaurants, cafes, nightlife, attractions and only 100 metres to patrolled beaches. All of the hotels refurbished accommodation rooms boast space and style and feature a large flat screen television with selected free Foxtel channels, a generous work area with high speed internet connection, red earth amenities, pillow menu, free in‐room safe and a private furnished balcony with Surfers Paradise or ocean views. Standard Room $155.00 (Room only) Single Double Twin (Select one) Date of arrival ________________ Date of departure _________________ Number of nights ____ PAYMENT (to confirm a booking a credit card is required) Card Type: (Please circle) Visa Mastercard AMEX
Card Number: l__l__l__l__l__l__l__l__l__l__l__l__l__l__l__l__l
Exp Date: l__l__l / l__l__l Total Amount $_______________ Date: _____________ Signature: _________________________ Your credit card will be used by the hotel as a guarantee only. The hotels reserve the right to charge one nights deposit. You will be requested upon check in to nominate your preferred payment method.
PLEASE FAX OR POST COMPLETED ACCOMMODATION BOOKING FORM TO CONFERENCE WORKS
________________________________________________________________________ CONFERENCE WORKS Level 1 120 Railway Avenue , Ringwood East, Victoria 3135 Phone: (03) 9870 2611 Fax: (03) 9870 1723 Email: [email protected]
REGISTRATION (All prices are in Australian Dollars and inclusive of GST) Speaker and Exhibitor Fee $770.00* Member Registration (APIA, AINDT, MA, PEAI, WTIA) $880.00* Non‐Member Registration $990.00* Student Registration $440.00* Day Registration $550.00**
Wednesday 26th August Thursday 27th August Friday 28th August Total $ ________ *Full, Student and speaker registrations include morning/afternoon tea, lunch, proceedings, one dinner ticket to the Conference dinner and one evening drinks ticket. **Day registration include morning/afternoon tea, lunch and proceedings.
ADDITIONAL OPTIONALS (All prices are in Australian Dollars and inclusive of GST) Dinner 27th August $85.00 Nos: _________ TOTAL: $________
Additional copy of proceedings $110.00 No of copies:__________ TOTAL: $________ I wish to pay a total of $__________ by Cheque made payable to Materials Australia or please debit my credit card: Mastercard Visa
Card Number: ______/______/_______/_______ Expiry Date: ________/_______
Cardholders Name:______________________________________________________________________________________
Cardholder Signature_____________________________________________________________________________________
or Direct Transfer to the Materials Australia Bank Account: Bank: Commonwealth Bank of Australia, 267 Collins Street Melbourne Vic Australia Account Name: Institute of Materials Engineering Australasia Ltd BSB: 063000 Account Number: 0080 0220 Please fax your payment advice to +61 3 9326 7272
Please return completed registration form to: Conference Secretariat, PO Box 19, Parkville, Vic 3052 or Fax: (03) 9326 7272. Enquiries: Tel: +61 3 9326 7266 or E‐mail: [email protected]
CANCELLATION POLICY Substitutes will be accepted. Cancellation after 12/08/09 ‐ no refunds will be given. Cancellation on or before 12/08/09 refund will be registration fee less $100
Title (Dr/Mr/Mrs/Ms):
First Name:
Surname:
Organisation:
Address:
City:
Postcode: State:
Country:
Telephone:
Facsimile:
Email:
OPE/AINDT 2009 Registration Form
Phone: +61 3 9326 7266 Fax: +61 2 9326 7272
E-mail: [email protected]
MA T E R I A L S A U S T R A L I A
Suite 205, 21 Bedford Street North Melbourne
Victoria, 3051 Australia
Suppor t i ng Organ i sa t ions
Confe rence Organ i se rs
Go ld Sponso rs
P la t i num Sponso r
AUSTPOWER ENGINEERING Pty Ltd