8/10/2019 982c8d35-36ee-432e-9a8c-f829cd8b1781.pdf
1/2
KDF-E42A10
KDF-E50A10
Sony Corporation 2005 Printed in U.S.A.
2-597-545-11(1)
Quick Setup Guide
Connecting Your TV(See reverse side)
Programmingthe Remote Control
Running Initial Setup
For further information, see the operating instruction supplied
with the TV.Please retain this guide for your future reference.
Please follow the steps to setup your TV:
zzz
For service and technical assistance, call our Customer
Information Service Center (Toll Free):US residents: 1-800-222-SONY
(7669) or visit http://www.sonystyle.com/tv/Canadian residents:
1-877-899-SONY (7669) or visit http://www.sonystyle.ca/tv/
DO NOT RETURN TO THE STORE
2
1
3zzz
Projection Lamp:Periodic replacement of the projection lampwill
maintain the picture quality.See Replacement Lamp section of the
manual.
Wide Mode:Selecting appropriate screen mode will
increaseenjoyment of your TV viewing.
When watching a Standard Definition source (4:3 aspectratio) on
this TV, you will see bars on both t he left and rightsides of the
screen. Press the WIDE button on your remote tocycle through
different screen modes to fill the screen invarious ways. (Wide
Zoom enlarges the center, Normal is
how your TV receives the signal, Full stretches horizontallyand
Zoom enlarges the image proportionately to fill thescreen.)
When watching a High Definition source (16:9 aspect ratio)on
this TV, you will see screen filled with a image. Press theWIDE
button on your remote to toggle through differentscreen modes,
especially zooming in to the center of thescreen. (Wide Zoom
enlarges the center, Full displays theimage at its original size,
Zoom enlarges the imageproportionately to fill the screen.)
When the TV receives a 720p or 1080i formatted signal, theNormal
mode is not available. See Using WIDE Button section
of the manual.
If you feel the images on the screen is stretched, press the
WIDE button to select adifferent screen mode.
Notes on your new TVRunning Initial Setup
1 Press to turn on the TV.The Initial Setup screen appears.
2 Press V or vto highlight the on-screendisplay language. Then
press .
The message First please connect
cable and/or antenna appears. This may require 50+ minutes
for
completion and Start auto program now? appears.
3 Press (Yes) to start Initial Setup.
Initial Setup automatically creates a list ofreceivable channels
from both VHF/UHFantenna and cable TV channels if bothsources are
connected.
When Initial Setup is complete, the TVwill display the total
number of analog channels and the totalnumber of digital channels
found.
4 Press to exit this screen.
To run Auto Program again at a later time
Refer to the manual on Initial Setup and Auto Program
sections.
2
Best Audio/VideoPerformance
Activating CableCARD ServiceBefore you can use CableCARD
service, you need to insert theCableCARD device (supplied by your
cable provider) and activatethe service.
Inserting the CableCARD incorrectly may result in permanent
damage to the card andthe TV.The connection diagrams shown in the
reverse side are recommendations only; otherpossible solutions may
exist. Connections that include an AV receiver can often becomplex,
so check your AV receiversinstruction manual for
additionaldetails.See the Cables Required chart that
appears with the diagram to determinewhich cables youll need.
Depending onthe components you plan to connect,you may need to
purchase extra cables.
1 Connecting Your TV
Programming the Remote Control
The remote control is preset to operate Sony brand video
equipment.
Sony Equipment Programmable Code Number
DVR 772
DVD/VCR 601 (Sony Dream System)
SAT/CABLE 801 (Sony Satellite Receiver)
Follow the steps below to program your TVs remote control
tooperate the non-Sony video equipment.
Find the three-digit code for your equipment from
theManufacturers Codes listed on right. If more than one code
number is listed, try entering from the code listed first.1
Press and hold the , or FUNCTION
button you want to program on the remote control andpress the
button simultaneousl y.
The selected FUNCTION button ( , or )will flash.
2 Enter the three-digit manufacturers code numberusing the 0-9
buttons while the button is lit. If code isnot entered within 10
seconds, you must perform thestep 1 again.
3 Press button.When programmed correctly, the selected
FUNCTION
button will flash twice, and when not, it flashes fivetimes.
To check if the code works
Aim your TVs remote control at the equipment, and pressthe green
button. If the equipment responds, theprogramming is completed. If
not, try the next code listed.
3
If no code is input within the above specified time, or an
invalid or incorrect code
number is input, the remote control automatically goes back to
the previous setting.In some cases, you may not be able to program
your remote control to operate otherequipment. In such cases, use
the equipments own remote control.Removing the batteries or dead
batteries may cause the programmed codes to be lostand revert back
to the factory setting. Reprogramming the codes may be
necessary.
1
23
1
Manufacturers codes
DVD Players
Manufacturer CodeSony 751
G en er al E l ec tr ic 7 55
Hitachi 758
JVC 756
Magnavox 757
Mitsubishi 761
Panasonic 753
Philips 757
Pioneer 752, 778
RC A/ PRO SC AN 75 5
Samsung 758
Toshiba 754
Zenith 760
DVD ChangersManufacturer CodeSony 765
Panasonic 766
DVD/VCR Combo Units
Manufacturer CodeSony 767
Broksonic 776
JVC 775
Panasonic 777
Samsung 774
Toshiba 773
Zenith 768
HDD/DVD Combo Units
Manufacturer CodeSony 772, 771, 770
5.1ch DVD AV System
Manufacturer CodeS on y ( DA V) 6 01 , 6 02 , 6 03 , 6 04
AV Receivers
Manufacturer CodeSony 764
VCRsManufacturer CodeSony 301, 302, 303
Admiral (M. Ward) 327
Aiwa* 338, 344
A ud io D yn am ic 3 14 , 33 7
Manufacturer CodeBroksonic 319, 317
Canon 309, 308
Citizen 332
Craig 302, 332
C ur ti s M at he s 3 04 , 33 8, 3 09
Daewoo 341, 312, 309
DBX 314, 336, 337
Dimensia 304
E me rs on 3 19 , 3 20 , 3 16 , 3 17 ,318, 341
Fisher 330, 335
Funai 338
Ge ne ral E lec t ri c 3 2 9, 3 0 4, 3 0 9
Go Video 322, 339, 340
Goldstar 332
Hitachi 306, 304, 305, 338
I ns ta nt R ep la y 3 09 , 3 08
J C P en ne y 3 09 , 3 05 , 3 04 , 3 30 ,314, 336, 337
JVC 314, 336, 337, 345,346, 347
K en wo od 3 14 , 3 36 , 3 32 , 3 37
LG 332
L XI (S EA RS ) 3 32 , 3 05 , 3 30 , 3 35 ,338
M ag na vo x 3 08 , 30 9, 31 0
Marantz 314, 336, 337
Marta 332
Memorex 309, 335
Minolta 305, 304
Mitsubishi/MGA 323, 324, 325, 326
M ul tit ech 3 25 , 3 38, 32 1
NEC 314, 336, 337
Olympic 309, 308
Optimus 327
Orion 317
P an as on ic 3 08 , 30 9, 3 06 , 30 7
Pentax 305, 304
Philco 308, 309
Philips 308, 309, 310
Pioneer 308
Quasar 308, 309, 306
R CA /P RO SC AN 3 04 , 3 05 , 30 8, 3 0 9,311, 312, 313,
310,329
Re al ist ic 3 09 ,3 30, 32 8, 33 5,324, 338
Sansui 314
Samsung 322, 313, 321Sanyo 330, 335
Scott 312, 313, 321, 335,323, 324, 325, 326
Sharp 327, 328
Signature2000(M.Ward)338, 327
SV 2000 338
Manufacturer CodeS yl va ni a 308 ,3 09 ,3 38 ,3 10
Symphonic 338
Tashiro 332
Tatung 314, 336, 337
Teac 314, 336, 338, 337
Technics 309, 308
Toshiba 312, 311
Wards 327, 328, 335, 331,332
Yamaha 314, 330, 336, 337
Zenith 331
Cable Boxes
Manufacturer CodeSony 230
Ha ml in/R eg a l 2 2 2, 22 3 , 2 2 4, 22 5 ,226
J er rol d/ 2 01 , 2 02 , 2 03 , 2 04 ,Ge ne ral In s t. / 2 0
5, 20 6 , 2 0 7, 20 8 ,Motorola 218, 222
Oak 227, 228, 229
P an as oni c 2 19 ,2 20 ,2 21
Pioneer 211, 214, 215
ScientificAtlanta 209, 210, 211
Tocom 216, 217
Zenith 212, 213
Satellite Receivers
Manufacturer CodeSony 801
D is hN etw or k 8 10
Echostar 810
G en er al E l ec tr ic 8 02
Hitachi 805
Hughes 804
Mitsubishi 809
Panasonic 803
Philips 811
R CA /P RO SC AN 8 02 , 80 8
Toshiba 806, 807
Samsung 812
* If an Aiwa VCR does notwork even though you enterthe code for
Aiwa, enter the
code for Sony instead.
Making Audio/Video ConnectionsYour new TV includes various types
of video inputs and two typesof audio jacks; composite-RCA type and
digital audio (optical).Use the outputs/inputs that are available
on your components thatprovide the best video/audio
performances:
Connector type
HDMI(High-Definition Multimedia
Interface)
DVI (Digital Video Interface)
Willrequireanadaptertoconnectto thisTV.
Component video
S VIDEO
Composite video
RF/Coaxial
Review the following chart to determine which diagram to use to
connect the components in your system:Turn off and unplug all
components before making connections.
Connector type
Digital Optical
Digital Coaxial
Will require an adapterto connect to this TVs
digital audio input.
Analog Audio
PCM/DOLBY DIGITAL
DIGITALAUDIO
(OPTICALOUT)
HD DVR
PC
PC
ENT
RETURN T
OOLS
TV/VIDEO
TV
MUTING
DVD/VCR
SAT/CABLEDVR
POWERTVPOWER
JUMP ANT MTS/SAP FREEZE
SOUND PICTURE TV/SAT
SUR
WIDE
WEGA
VISUALSEARCH
CHVOL
REC RECPAUSE RECSTOP
TOPMENU MENU F1 F2
GUIDE
DISPLAY
REPLAY
GATE
ADVANCE
PLAY
PAUSE
PREV NEXT
STOP
TV
