Embed Size (px)
Citation preview
Congratulations! Thank you for choosing our iPad 9.7 inch keyboard case.
Before using it, please read this manual.
Get Start
9.7 inch Keyboard Case
USER GUIDE
1. iPad 9.7 inch Keyboard Case2. Micro USB3. User Manual
iPad 2018 (A1893, A1954)
iPad 2017 (A1822, A1823)
iPad Pro 9.7 (A1673, 1674, A1675)
iPad Air 2 (A1566, A1567)
iPad Air (A1474, A1475, A1476)
Please note that it may be a little loose when used on the iPad Air, we send
the foam pad for free in the product package. Please place the foam pad on
the bottom of the iPad so that it can fit the iPad air perfectly.
Fit for
Whole key`s function
Package Contents
First you have to hit the ‘ ’ light bulb to turn it on, beside the space bar.
Hit it once for on, twice for brighter, third for the brightest and fourth to turn it
off, and then press the light bulb key and page up/page down together to
change the color.
1. After installing tablet into keyboard case, with the case open, slide the on/off
switch located on side of case along side the three led indicators (charge batt
pair) to ON position.
2. Press the square WiFi button located next to ON/OFF switch on side of case.
The blue “PAIR LED” light on keyboard will flash.
Function key description
How to get the keyboard sync with iPad
How to change the backlight color?
Main screen/Esc
Search
PrevTrack Play/pause
NextTrack Mute Volume -
Volume + Lock screen
Brightness- Brightness+
CopyVirtual Keyboard
Paste
=
=
=
=
=
=
=
=
=
=
=
=
=
=
3. iPad settings menu - Turn Bluetooth - ON
4. In MY DEVICES select “Bluetooth Keyboard”
5. Bluetooth Keyboard will connect.
Blue LED, will flash when searching paring device, will be extinguished after
successful pairing.
Red LED will always be on when charging, and will be off when full of charge.
Green LED will flash when it is powered off, and it will always be on when it is
fully charged.
When you turn on the keyboard, the green and blue LED will shine about
3 second.
If still can not connect the Bluetooth, please contact us by e-mail, we will try
our best to solve it. You will find our email address on the warranty card.
LED indicator
1.The keyboard comes with a built-in rechargeable lithium battery. Plug
the micro-USB cable (included) into the 5V DC Input port on the keyboard
case and into a USB outlet or a USB port on your computer to charge
your keyboard.
2.Fully charge your keyboard, or charge it for more than 2 hours, before
you use it for the first time.
In a small paper box, it has an icon of the charging cable, located next to
our keyboard case
Please charge with another cable and adapter and charge it at least 2
hours to see if it works.
If it's the problem of our cable, please email us at once, we will send you
a new cable.
Charging
Can't hold a charge
Where's the charging cable?
1) Removing back protective piece: hold iPad on both sides and use thumbs to
gently push off the back cover (see photo.) Cover is held in place by two tabs.
2) Proceed to “peel” cover away from iPad.
3) Take iPad out.
4) Take iPad out upwards.
or
Find out an expired card
Insert the card into the gap and push the card to the cover side a little bit
Slid the card from one side to another
Separate the iPad from the cover easily
How can I open the keyboard case?
Rotate the top and bottom apart a little bit and pull
The resistance is to hold the ipad in place after opening
Installation and removal
Trouble shooting
Caution :
With one year warranty , we will help you solve theproblem please do not
worry . if you have problem swith keyboard usage or improvement opinions ,
pleasedo not hesitate to contact us thank you .
Dattery capacity 500mah
Charging time 2 hours
8 hours continuous using time when the backlit is on
200 daysStand by time
Working distance 33 feet (10 meters)
Operating Current <5 MA
3.7 V DCOperating Voltage
Standby Current 1.0 MA
Dimensions 9. 7x7x0.6 inches
2 hoursCharging time
60 hours continuous using time when the backlit is off
Specifications
In your iPad, there are some smart settings and it impacts to the typing
experience and sensitivity of the typing, it sometimes cause the keyboard too
sensitive and easily to mistype, you could toggle off the settings in Keyboard
(Auto-Correction, Enable Caps Lock, Shortcuts, Smart Punctuation, Split,
Key repeat...)
My keyboard is too sensitive and always mistype.
There are several reasons that can cause this problem:
1. there's a KEY REPEAT in the ipad settings(settings-general-key repeat-off.
2. didn't choose the right language.
3. Wireless connection is unstable(maybe caused by lack of power.
4. If you do not press any key for a long time, the keyboard will enter sleep
mode andthe first key you press will wake up it.
Step 1: Make sure your ipad is fully charged.
Step 2: Delete the keyboard connection on ipad (suggest to update ipad system
tolatest version)Charging light(Red LED on: Charging) Battery light
(GreenLED on: Full battery charge. RED LED blinking: Low battery.
Step 3: Reboot your ipad and keyboard.
Step 4: Reconnect it again.
The keys types lagging and need press hard to have the
letters,sometimes get doubleletters and double spaces
