96 probe

[PI00200(ALL)05/95]

thirty-two pica chart:

File:prpip.exUpdate:Fri Jun 23 19:39:31 1995

*[PI00300(ALL)05/95]

thirty-six pica chart:


*[PI01700(ALL)05/95]

Table of Contents

Introductory Information ............................... 1

Safety Restraints .............................................. 9

Starting Your Probe ...................................... 37

Warning Lights and Gauges ....................... 51

Instrument Panel Controls .......................... 63

Steering Column Controls .......................... 77

Features ............................................................ 95

Electronic Sound Systems ......................... 121

Driving Your Probe .................................... 147

Roadside Emergencies ................................ 169

Customer Assistance ................................... 185

Accessories .................................................... 197

Servicing Your Probe ................................. 203

Quick Index .........................................281

Index ................................................................ 291

Service Station Information ....................... 308


1

Introductory Information

*[IN00300(ALL)04/95] Ford’s Commitment to You

*[IN00400(ALL)04/95] At Ford Motor Company, excellence is thecontinuous commitment to achieve the bestresult possible. It is dedication to learning whatyou want, determination to develop the rightconcept, and execution of that concept with care,precision, and attention to detail. In short,excellence means being the standard by whichothers are judged.

*[IN00500(ALL)04/95] Our Guiding Principles

*[IN00600(ALL)04/95] ❑Quality comes first. For your satisfaction, thequality of our products and services must beour number one priority.

*[IN00700(ALL)04/95] ❑You are the focus of everything we do. Ourwork must be done with you in mind,providing better products and services thanour competition.

*[IN00750(ALL)04/95] ❑Continuous improvement is essential to oursuccess. We must strive for excellence ineverything we do: in our products — in theirsafety and value — and in our services, ourhuman relations, our competitiveness, andour profitability.

*[IN00800(ALL)04/95] ❑Employee involvement is our way of life.We are a team. We must treat one anotherwith trust and respect.

*[IN00900(ALL)04/95] ❑Dealers and suppliers are our partners. Wemust maintain mutually beneficialrelationships with dealers, suppliers, and ourother business associates.

File:prinp.exUpdate:Fri Jun 23 19:39:18 1995

2

*[IN01000(ALL)04/95] ❑ Integrity is never compromised. Our conductworldwide must be pursued in a manner thatis socially responsible and commands respectfor its integrity and for its positivecontributions to society.

*[IN01010(ALL)05/95] Things to Know About UsingThis Guide

*[IN01020(ALL)05/95] Congratulations on the purchase of your newvehicle. This guide has information about theequipment and the options for your new vehicle.You may not have bought all of the optionsavailable to you. If you do not know whichinformation applies to your vehicle, talk to yourdealer.

*[IN01030(ALL)05/95] This guide describes equipment and givesspecifications for equipment that was in effectwhen this guide was approved for printing. Fordmay discontinue models or change specificationsor design without any notice and withoutincurring obligation.

*[IN01040(ALL)05/95] NOTES and WARNINGS

*[IN01042(ALL)05/95] NOTES give you additional information aboutthe subject matter you are referencing.

*[IN01044(ALL)05/95] WARNINGS remind you to be especially carefulin those areas where carelessness can causedamage to your vehicle or personal injury toyourself, your passengers or other people. Pleaseread all WARNINGS carefully.

*[IN01046(ALL)05/95] RWARNING


3

*[IN01050(ALL)05/95] Finding Information in This Guide

*[IN01060(ALL)05/95] After you have read this guide once, you willprobably return to it when you have a specificquestion or need additional information. To helpyou find specific information quickly, you canuse the Quick Index, table of contents, or theIndex.

*[IN01070(ALL)05/95] The Quick Index at the end of the bookprovides a page number following each itemwhich indicates where detailed information canbe found.

*[IN01075(ALL)05/95] This guide has a table of contents at thebeginning of the book to show chapter titles.

*[IN01080(ALL)05/95] To use the Index, turn to the back of the bookand search in the alphabetical listing for theword that best describes the information youneed. If the word you chose is not listed, thinkof other related words and look them up. Wehave designed the Index so that you can findinformation under a technical term.

%*[IN01090(ALL)05/95] Canadian Owners — French Version

*[IN01100(ALL)05/95] French Owner Guides can be obtained from yourdealer or by writing to Ford Motor Company ofCanada, Limited, Service Publications, P.O. Box1580, Station B, Mississauga, Ontario L4Y 4G3.

*[IN02400(ALL)04/95] Your Maintenance Schedule andRecord Booklet

*[IN02500(ALL)03/95] The Maintenance Schedule and Record booklet liststhe services that are most important for keepingyour vehicle in good condition. A record log isalso provided to help you keep track of allservices performed.


4

%*[IN02600(ALL)01/95] About the Warranties

*[IN02700(ALL)04/95] Your vehicle is covered by three types ofwarranties: Basic Vehicle Warranty, ExtendedWarranties on certain parts, and EmissionsWarranties.

%*[IN03100(ALL)03/95] Read your Warranty Information Booklet carefullyto find out about your vehicle’s warranties andyour basic rights and responsibilities.

*[IN03250(ALL)03/95] If you lose your Warranty Information Booklet, youcan get a new one free of charge. Contact anyFord or Lincoln-Mercury dealer, or refer to theaddresses and phone numbers on the first pageof this owner guide.

%*[IN04000(ALL)01/95] Buying a Ford Extended Service Plan

*[IN04100(ALL)01/94] If you bought your vehicle in the U.S., you canbuy a Ford Extended Service Plan for yourvehicle. This optional contract provides serviceprotection for a longer period of time than thebasic warranty that comes with your vehicle.

*[IN04200(ALL)01/95] You do not have to buy this option when youbuy your vehicle. However, your option topurchase the Ford Extended Service Plan runsout after 18 months or 18,000 miles. See yourdealer for more details about the Ford ExtendedService Plan.

*[IN04250(ALL)01/95] If you purchased a Canadian vehicle and did nottake advantage of the Ford Extended ServicePlan at the time of purchase, you may still beeligible. See your dealer for the details.


5

%*[IN05700(ALL)05/95] Federal Highway AdministrationRegulation

*[IN05800(ALL)05/95] Regulations such as those issued by the FederalHighway Administration or issued pursuant tothe Occupational Safety and Health Act (OSHA),and/or state and local laws and regulations mayrequire additional equipment for the way youintend to use the vehicle. It is the responsibilityof the registered owner to determine theapplicability of such laws and regulations toyour intended use for the vehicle, and toarrange for the installation of requiredequipment. Your Ford dealer has informationabout the availability of many items ofequipment which may be ordered for yourvehicle.

*[IN06000(ALL)01/95] Breaking Your Vehicle In

*[IN06100(ALL)03/95] Your new vehicle goes through an adjustment orbreak-in period during the first 1,000 miles(1,600 km) that you drive it. During the break-inperiod, you need to pay careful attention to howyou drive your vehicle.

%*[IN06300(ALL)01/95] ❑Avoid sudden stops. Because your vehiclehas new brake linings, you should take thesesteps:

*[IN06400(ALL)01/95] — Watch traffic carefully so that you cananticipate when to stop.

*[IN06500(ALL)01/95] — Begin braking well in advance.

*[IN06600(ALL)01/95] — Apply the brakes gradually.

*[IN06700(ALL)01/95] The break-in period for new brake liningslasts for 100 miles (160 km) of city driving or1,000 miles (1,600 km) of highway driving.


6

%*[IN06800(ALL)01/95] ❑Use only the type of engine oil that Fordrecommends. See Engine oil recommendationsin the Index. Do not use special “break-in”oils.

%*[IN07100(ALL)04/95] Cleaning the Outside of YourVehicle

%*[IN07200(ALL)04/95] Washing and Polishing Your Vehicle

*[IN07300(ALL)04/95] Wash the outside of your vehicle, including theunderside, with a mild detergent.

*[IN07400(ALL)04/95] DO NOT:

*[IN07500(ALL)04/95] ❑Wash your vehicle with hot water

*[IN07600(ALL)04/95] ❑Wash your vehicle while it sits in directsunlight

*[IN07700(ALL)04/95] ❑Wash your vehicle while the body is hot

*[IN07800(ALL)05/95] Pollen, bird droppings and tree sap can damagethe paint, especially in hot weather. Wash yourvehicle as often as necessary to keep it clean.

*[IN07900(ALL)05/95] Take similar precautions if your vehicle isexposed to chemical industrial fallout.

*[IN08000(ALL)06/95] Paint damage resulting from fallout is notrelated to a defect in paint materials orworkmanship and therefore is not covered bywarranty. Ford, however, believes that continualimprovement in customer satisfaction is a highpriority. For this reason, Ford has authorized itsdealers to repair, at no charge to the owner, thesurfaces of new vehicles damaged byenvironmental fallout within 12 months or 12,000miles (20,000 km) of purchase, whichever comesfirst. Customers may be required to bring theirvehicle in for inspection by a Fordrepresentative.

*[IN08100(ALL)04/95] Polish your vehicle to remove harmful depositsand protect the finish.


7

*[IN08200(ALL)04/95] Cleaning Chrome and Aluminum Parts

*[IN08300(ALL)04/95] Wash chrome and aluminum parts with a milddetergent. Do not use steel wool, abrasivecleaners, fuel or strong detergents.

%*[IN08400(ALL)04/95] Cleaning Plastic Parts

*[IN08500(ALL)04/95] Some of your vehicle’s exterior trim parts areplastic. Clean with a tar and road oil remover ifnecessary. Use a vinyl cleaner for routinecleaning.

*[IN08600(ALL)04/95] Do not clean plastic parts with thinners, solventsor petroleum-based cleaners.

%*[IN08700(ALL)04/95] If you have your vehicle rustproofed, removeoversprayed rustproofing with a tar and road oilremover. If rustproofing is not removed fromplastic and rubber parts, it can causedeterioration.

*[IN08725(ALL)04/95] Because your vehicle’s side mouldings arepainted in lacquer, do not use thinners orsolvents to clean them.


9

Safety Restraints

*[SR00500(ALL)04/95] Important Safety Belt Information

*[SR00600(ALL)03/95] The use of safety belts helps to restrain you andyour passengers in case of a collision. In moststates and in Canada the law requires their use.

*[SR00700(ALL)01/95] Safety belts provide best restraint when:

*[SR00800(ALL)01/95] ❑ the seatback is upright

*[SR00900(ALL)01/95] ❑ the occupant is sitting upright (not slouched)

*[SR01000(ALL)01/95] ❑ the lap belt is snug and low on the hips

*[SR01100(ALL)01/95] ❑ the shoulder belt is snug against the chest

*[SR01200(ALL)01/95] ❑ the knees are straight forward

[SR01975(ALL)04/95] To help you remember to fasten your safety belt,a warning light may come on and a chime maysound. See Safety Belt Warning Light/Chime in theWarning Lights and Gauges chapter.

*[SR02000(ALL)01/95] See the following sections in this chapter fordirections on how to properly use these safetybelts. Also see Safety Restraints for Children in thischapter for special instructions about usingsafety belts for children.

%*[SR02100(ALL)05/95] RWARNING

Make sure that you and your passengerswear safety belts. Always drive and ridewith your seatback upright and the lapbelt snug and low across the hips.

File:prsrp.exUpdate:Fri Jun 23 19:39:12 1995

10

*[SR02200(ALL)05/95] RWARNING

Never wear the shoulder belt under thearm. Never swing it around the neck overthe inside shoulder. Never use a singlebelt for more than one person or acrossmore than one seating position. Eachseating position in your vehicle has aspecific safety belt assembly which ismade up of one buckle and one tonguethat are designed to be used as a pair.Failure to follow these precautions couldincrease the risk and/or severity of injuryin a collision.


Ford recommends that all safety beltassemblies and attaching hardware shouldbe inspected by a qualified technicianafter any collision. Safety belt assembliesnot in use during a collision should alsobe inspected and replaced if eitherdamage or improper operation is noted.


To reduce the risk of serious injury in acollision, children should always ride withthe seatback upright.


Never let a passenger hold a child on hisor her lap while the vehicle is moving.The passenger cannot protect the childfrom injury in a collision.

*[SR02875(ALL)05/95] Lock the doors of your vehicle before driving tolessen the risk of the door coming open in acollision.


11

*[SR03475(ALL)05/95] Combination Lap and ShoulderBelts

*[SR03500(ALL)05/95] While your vehicle is in motion, the combinationlap and shoulder belt adjusts to your movement.However, if you brake hard, turn hard, or ifyour vehicle receives an impact of 5 mph(8 km/h) or more, the lap and shoulder beltlocks and helps reduce your forward movement.

*[SR03600(ALL)05/94] After you get into your vehicle, close the doorand lock it. Then adjust the driver or passengerseat to the position that suits you best.

*[SR03700(ALL)05/95] Pull the combination lap/shoulder belt from theretractor so that the shoulder portion of the beltcrosses your shoulder and chest. Be sure the beltis not twisted. If it is, remove the twist. Insertthe belt tongue into the proper buckle until youhear a snap and feel it latch. Make sure thetongue is securely fastened to the buckle bypulling on tongue.

[SR03800(ALL)05/95]

one third page art:0030008-B

Fastening the front seat combination lap and shoulder belt

*[SR03810(ALL)05/95] NOTE: Be sure to read and understandImportant Safety Belt Information atthe beginning of this chapter.


12

[SR04025(ALL)06/95]

one third page art:0032083-A

Unfastening the combination lap and shoulder belt — frontand rear seating positions

*[SR04050(ALL)05/95] While the belt retracts, guide the tongue to itsoriginal position to prevent it from striking youor the vehicle.

[SR04055(ALL)05/95] Lap/Shoulder Belt Retractors(Dual Locking Modes)

*[SR04060(ALL)06/95] Your vehicle is equipped with a dual lockingmode retractor on the shoulder belt portion ofthe combination lap/shoulder safety belt for allpassengers.

*[SR04065(ALL)05/95] Dual locking mode retractors operate in twoways:

*[SR04080(ALL)05/95] Vehicle sensitive (emergency) locking mode

*[SR04090(ALL)05/95] In this operating mode, the shoulder beltretractor will allow the occupant freedom ofmovement, locking tight only on hard braking,hard cornering or impacts of approximately5 mph (8 km/h) or more. The retractor can alsobe made to lock by pulling on the belt.


13

%*[SR04100(ALL)05/95] Automatic locking mode

*[SR04105(ALL)05/95] In this operating mode, the shoulder beltretractor will be automatically locked and willremain locked when the combinationlap/shoulder safety belt is buckled, and does notallow the occupant freedom of movement. Thismode provides the following:

*[SR04110(ALL)05/95] ❑A tight lap/shoulder belt on the occupant.

*[SR04115(ALL)05/95] ❑Child safety seat installation.


Rear-facing infant seats should never beplaced in the front seats.

*[SR04120(ALL)03/94] This mode must be used when installing a childseat. To switch the retractor from the emergencylocking mode to the automatic locking mode,perform the following steps:

*[SR04130(ALL)03/95] 1. Buckle the lap/shoulder combination belt.

*[SR04140(ALL)03/94] 2. Pull on the belt until all of the stored belt isout of the retractor and a click is heard.

*[SR04150(ALL)05/95] 3. A clicking sound will continue to be heardas the belt is allowed to retract. Thisindicates that the retractor is in theautomatic locking mode.

*[SR04170(ALL)05/95] NOTE: When the combination lap/shoulderbelt is unbuckled and allowed toretract completely, the retractor willswitch to the vehicle sensitive(emergency) locking mode. See thedetailed instructions under Safety Seatsfor Children in this chapter.


14

%*[SR14690(ALL)05/95] Safety Belt Extension Assembly[SR14692(ALL)05/95] A safety belt that is too short even when fully

extended can be lengthened. You can add abouteight inches (20 cm) to the belt length with asafety belt extension assembly. Safety beltextensions are available at no cost from yourdealer.

*[SR14693(ALL)05/95] Use only extensions manufactured by the samesupplier as the safety belt. Manufactureridentification is located at the end of thewebbing on the label. Also, use the safety beltextension only if the safety belt is too short foryou when fully extended. Do not use extensionto change the fit of the shoulder belt across thetorso.


Failure to follow these instructions willaffect the performance of the safety beltsand increase the risk of personal injury.

%*[SR14696(ALL)05/95] Safety Belt Maintenance*[SR14698(ALL)05/95] Check the safety belt systems periodically to make

sure that they work properly and are not damaged.%*[SR14700(ALL)05/95] All safety belt assemblies, including retractors,

buckles, front seat belt buckle support assemblies(slide bar) (if equipped), child safety seat tetherbracket assemblies (if equipped), and attachinghardware, should be inspected after anycollision. Ford recommends that all safety beltassemblies used in vehicles involved in acollision be replaced. However, if the collisionwas minor and a qualified technician finds thatthe belts do not show damage and continue tooperate properly, they do not need to bereplaced. Safety belt assemblies not in useduring a collision should also be inspected andreplaced if either damage or improper operationis noted.


15

%*[SR14704(ALL)05/95] Cleaning the Safety Belts

*[SR14706(ALL)05/95] Clean the safety belts with any mild soapsolution that is recommended for cleaningupholstery or carpets. Do not bleach or dye thebelt webbing because this may weaken it.

[SR14708(ALL)05/95] Air Bag Supplemental RestraintSystem (SRS)

*[SR14740(ALL)05/95] The driver and right front passenger air bags areSupplemental Restraint Systems (SRS), providedat these seating positions in addition to thelap/shoulder belt, and are designed tosupplement the protection provided to properlybelted occupants in moderate to severe frontalcollisions. The supplemental air bag system doesnot provide restraint to the lower body.

*[SR14750(ALL)05/95] The Importance of Wearing Safety Belts


Safety belts must be worn by all vehicleoccupants to be properly restrained andhelp reduce the risk of injury in acollision.


All occupants of the vehicle, including thedriver, should always wear their safetybelts, even when an air bag SupplementalRestraint System is provided.


16

*[SR14800(ALL)01/95] There are four very important reasons to usesafety belts even with an air bag system. Useyour safety belts to:

*[SR14825(ALL)01/95] ❑help keep you in the proper position (awayfrom the air bag) when it inflates

*[SR14850(ALL)01/95] ❑ reduce the risk of harm in rollover, side orrear impact collisions, because an air bag isnot designed to inflate in such situations

*[SR14875(ALL)01/95] ❑ reduce the risk of harm in frontal collisionsthat are not severe enough to activate thesupplemental air bag

*[SR14900(ALL)01/95] ❑ reduce the risk of being thrown from yourvehicle

%*[SR14920(ALL)01/95] The Importance of Being Properly Seated

*[SR14940(ALL)05/95] In a collision, the air bag must inflate extremelyfast to help provide additional protection foryou. In order to do this, the air bag must inflatewith considerable force. If you are not seated ina normal riding position with your back againstthe seatback, the air bag may not protect youproperly and could possibly hurt you as itinflates.


If a passenger is not properly seated andrestrained, an inflating air bag could causeserious injury.


Rear-facing infant seats should never beplaced in the front seat.


17

*[SR14948(ALL)06/95] In rear-facing infant seats, the infant’s head iscloser to the air bag. The force of the rapidlyinflating air bag could push the top of therear-facing seat against the vehicle seatback orcenter armrests (if so equipped), or centerconsole (if so equipped). REAR-FACINGINFANT CARRIERS MUST ALWAYS BESECURED IN THE REAR SEAT, and other childsafety seats and infant seats should be secured inthe rear seat whenever possible.

*[SR14949(ALL)05/95] Your vehicle is equipped with a right frontpassenger air bag. Air bags deploy with greatforce, faster than the blink of an eye. Frontpassengers, especially children and small adults,must never sit on the front edge of the seat,stand near the glove compartment of theinstrument panel, or lean over near the air bagcover when the vehicle is moving. All occupantsshould sit with their backs against the seatback,move the seat to the most rearward position ifpossible and use the safety belts. Childrenweighing less than 40 lbs. (18 kg) always shoulduse child or infant seats.


When using forward-facing child seatsmove the passenger seat as far back fromthe instrument panel as possible. NEVERSECURE REAR-FACING INFANT SEATSIN THE FRONT SEAT.


18

*[SR14952(ALL)05/95] THE FORCE OF THE RAPIDLY INFLATINGPASSENGER AIR BAG COULD PUSH THE TOPOF THE REAR-FACING SEAT AGAINST THEVEHICLE SEATBACK, ARMRESTS ORCONSOLE. REAR-FACING INFANT SEATSMUST ALWAYS BE SECURED IN THE REARSEAT.


Do not place objects or mount equipmenton or near the air bag cover on thesteering wheel or in front seat areas thatmay come in contact with a deploying airbag. Failure to follow this instruction mayincrease the risk of personal injury in theevent of a collision.

*[SR14980(ALL)05/95] For additional important safety information onthe proper use of seat belts, child seats, andinfant seats, please read the other sections of thispart of the Owner Guide, especially sectionsentitled Safety Belts for Children and Safety Seatsfor Children.

*[SR15000(ALL)01/95] How the Air Bag Supplemental RestraintSystem Operates

*[SR15005(ALL)06/95] The Air Bag Supplemental Restraint Systemconsists of the driver and passenger air bags,impact sensors, a system diagnostic module, areadiness light and tone, and the electricalwiring which connects the components.

*[SR15008(ALL)05/95] The driver air bag is in the center of the steeringwheel. The front passenger seat air bag islocated in the center of the instrument panelledge above the glove compartment. Both airbags are designed to stay out of sight until theyare activated.


19

[SR15014(ALL)06/94]

half page art:0032207-D

The location of the air bag and warning labels

*[SR15070(ALL)05/95] If a collision occurs, the sensors sense theseverity of the impact and activate the air bags ifnecessary. The air bag system is designed todeploy in frontal and front-angled collisionsmore severe than hitting a parked vehicle (ofsimilar size and weight) head-on at about28 mph (45 km/h). Because the system sensesthe crash severity rather than vehicle speed,some frontal collisions at speeds above 28 mph(45 km/h) will not inflate the air bag.


20

*[SR15089(ALL)05/95] When the sensors activate the system, the airbags inflate rapidly, filling with non-toxicnitrogen gas in a fraction of a second.Immediately after inflation, the air bags deflateby releasing the nitrogen gas through vent holes.The whole process takes place in a matter ofseconds.


Air bag system components get hot afterinflation. Do not touch them afterinflation.

[SR15100(ALL)04/93]

half page art:0032152-A

Inflated driver-side air bag


21

[SR15110(ALL)05/95]


Inflated passenger-side air bag


If the air bag is inflated, THE AIR BAGWILL NOT FUNCTION AGAIN ANDMUST BE REPLACED IMMEDIATELY. Ifthe air bag is not replaced, the unrepairedarea will increase the risk of injury in acollision.

[SR15120(ALL)05/95] To ensure that the air bag system will operate asintended in a crash, the system is equipped witha diagnostic module. The diagnostic modulemonitors its own circuits, the air bag electricalsystem, the air bag readiness light, the air bagpower, and the air bag inflators.


22

%*[SR15127(ALL)05/95] The air bag system uses a readiness light on theinstrument cluster and a tone to indicate thecondition of the system. When you turn theignition key to the ON position, this light willilluminate for approximately six (6) seconds andthen turn off. This indicates that the system isoperating normally. NOTE: Maintenance of theair bag system is not required.

%*[SR15129(ALL)05/95] A problem with the system is indicated by oneor more of the following:

*[SR15131(ALL)05/95] ❑ the readiness light will either flash or stay lit,

*[SR15133(ALL)05/95] ❑or it will not light immediately after ignitionis turned on,

*[SR15135(ALL)05/95] ❑or a group of five beeps will be heard. Thetone pattern will repeat periodically until theproblem and light are repaired.

*[SR15139(ALL)05/95] If any of these things happen, have the air bagsystem serviced at your Ford or Lincoln-Mercurydealer immediately. Unless serviced, the air bagsupplemental restraint system may not functionproperly in the event of a collision.


Do not attempt to service, repair, ormodify the Air Bag SupplementalRestraint System or its fuses. See yourFord or Lincoln-Mercury dealer.

%*[SR15150(ALL)05/95] Disposal of air bags or air bag equippedvehicles

*[SR15160(ALL)05/95] For disposal of air bags or air bag equippedvehicles, see your local Ford or Lincoln-Mercurydealer. Air bags MUST be disposed of byqualified personnel.


23

%*[SR15300(ALL)05/95] Safety Restraints for Children

*[SR15325(ALL)02/95] In the U.S. and Canada, you are required by lawto use safety restraints for children. If smallchildren ride in your vehicle — this generallyincludes children who are four years old oryounger and who weigh 40 pounds (18 kg) orless — you must put them in safety seats thatare made specially for children. Safety beltsalone do not provide maximum protection forthese children. Check your local and state lawsfor specific requirements.


Never let a passenger hold a child on hisor her lap while the vehicle is moving.The passenger cannot protect the childfrom injury in a collision.


To prevent the risk of injury, make surechildren sit where they can be properlyrestrained.


Passengers should not be allowed to ridein the cargo area. Persons not riding in aseat with a fastened seat belt are muchmore likely to suffer serious injury in acollision. Cargo should always be securedto prevent it from shifting and causingdamage to the vehicle or harm topassengers.


24

*[SR15500(ALL)05/95] When possible, put children in the rear seat ofyour vehicle. Accident statistics suggest thatchildren are safer when properly restrained inthe rear seating positions than in the frontseating positions.


Carefully follow all of the manufacturer’sinstructions included with the safety seatyou put in your vehicle. If you do notinstall and use the safety seat properly,the child may be injured in a sudden stopor collision.


Safety belts and seats can become hot in avehicle that has been closed up in sunnyweather; they could burn a small child.Check seat covers and buckles before youplace a child anywhere near them.


Never leave a child unattended in yourvehicle.


25

*[SR16500(ALL)01/95] Safety Seats for Children

*[SR16600(ALL)01/95] Use a safety seat that is recommended for thesize and weight of the child. Always follow thesafety seat manufacturer’s instructions wheninstalling and using the safety seat.

*[SR16620(ALL)02/95] Ford recommends the use of a child safety seathaving a top tether strap. Install the child safetyseat in a seating position which is capable ofproviding a tether anchorage. For moreinformation on top tether straps see AttachingSafety Seats With Tether Straps in this chapter.

*[SR16640(ALL)05/95] When installing a child safety seat, be sure touse the correct safety belt buckle for that seatingposition, and make sure the tongue is securelyfastened in the buckle.

*[SR16670(ALL)05/95] Your vehicle is equipped with a right frontpassenger air bag. Air bags deploy with greatforce, faster than the blink of an eye. Frontpassengers, especially children and small adults,must never sit on the front edge of the seat,stand near the glove compartment of theinstrument panel, or lean over near the air bagcover when the vehicle is moving. All occupantsshould sit with their backs against the seatback,move the seat to the most rearward position ifpossible and use the safety belts. Childrenweighing less than 40 lbs. (18 kg) always shoulduse child or infant seats.


26


When using forward-facing child seatsmove the passenger seat as far back fromthe instrument panel as possible. NEVERSECURE REAR-FACING INFANT SEATSIN THE FRONT SEAT.

*[SR16687(ALL)05/95] THE FORCE OF THE RAPIDLY INFLATINGPASSENGER AIR BAG COULD PUSH THE TOPOF THE REAR-FACING SEAT AGAINST THEVEHICLE SEATBACK, ARMRESTS ORCONSOLE. REAR-FACING INFANT SEATSMUST ALWAYS BE SECURED IN THE REARSEAT.

*[SR16749(ALL)05/95] All child restraint systems are designed to besecured in vehicle seats by lap belts or by thelap portion of a lap-shoulder belt.


If you do not properly secure the safetyseat, the child occupying the seat may beinjured during a collision or sudden stop.An unsecured safety seat could also injureother passengers.


Carefully follow all of the manufacturer’sinstructions included with the safety seatyou put in your vehicle. If you do notinstall and use the safety seat properly,the child may be injured in a sudden stopor collision.


27

[SR16860(ALL)05/95] Installing Child Safety Seats

*[SR16870(ALL)05/95] Your vehicle is equipped with a dual lockingmode retractor on the shoulder belt portoin ofthe front passenger seat and both rear seats. Theautomatic locking mode must be used wheninstalling a child seat or infant carrier in thefront passenger seat or rear seats.

[SR16875(ALL)05/95] RWARNING

Never install a rear-facing child seat orinfant carrier in the right front passengerseat.

*[SR16880(ALL)03/94] If you install a child safety seat or infant carrierin any of the seating positions, you must followthe proper procedures:

*[SR16890(ALL)05/95] 1. Position the child seat or infant carrier onthe passenger seat of the vehicle.

[SR16910(ALL)05/95] 2. Pull down on the shoulder belt, then graspthe shoulder belt and lap belt together.


28

[SR16912(ALL)05/95]

half page art:0032385-B

Grasping lap and shoulder belt together

[SR16915(ALL)05/95] 3. While holding the shoulder and lap beltportions together, route the tongue throughthe child seat according to the child seatmanufacturer’s instructions. Be sure the beltwebbing is not twisted.


29

[SR16921(ALL)05/95]


Routing safety belt through child seat or infant carrier

[SR16923(ALL)05/95]


Buckling the belt


30

[SR16930(ALL)05/95] 4. Grasp the shoulder portion of the belt andpull downward until all of the belt isextracted and a click is heard. At this time,the retractor is in the automatic lockingmode (child seat restraint mode).

[SR16935(ALL)05/95]


Setting the retractor to automatic locking mode

[SR16940(ALL)05/95] 5. Allow the belt to retract. Pull up on theshoulder webbing. A clicking sound will beheard as the belt retracts. This indicates thatthe retractor is in the automatic lockingmode. Push down on the child seat whileyou pull up on the belt webbbing to removeany slack in the belt.


31

[SR16950(ALL)05/95]


Removing slack from belt

[SR16955(ALL)05/95] 6. Before placing the child in the child seat orinfant carrier, forcibly tilt the seat from sideto side, and tug it forward to make sure thatthe seat is securely held in place.


32

[SR16957(ALL)03/94]


Checking that the seat is secure

[SR16970(ALL)05/95] 7. Double check that the retractor is in theautomatic locking mode. Try to pull morebelt out of the retractor. If you cannot, thebelt is in the automatic locking mode.


33

[SR16975(ALL)05/95]


Checking the retractor

[SR16980(ALL)05/95] 8. Check to make sure that the child seat orinfant carrier is properly secured prior toeach use. If the belt is not locked, repeatsteps 4 through 7.

[SR16990(ALL)05/95] NOTE: To remove the retractor from automaticlock mode, allow seat belt retract fullyto its stowed position and the retractorwill automatically switch back to thevehicle sensitive locking mode fornormal adult usage.


34


When using any infant or child restraintsystem, it is important that you follow theinstructions and warnings provided by themanufacturer concerning its installationand use. Failure to follow each of therestraint manufacturer’s instructions couldincrease the risk or severity of an injuryin the event of a collision or sudden stop.

*[SR20200(ALL)05/95] Attaching Safety Seats With Tether Straps

*[SR20300(ALL)05/95] Some manufacturers make safety seats thatinclude a tether strap that goes over the back ofthe vehicle seat and attaches to an anchoringpoint. Other manufacturers offer the tether strapas an accessory. Contact the manufacturer ofyour child safety seat for information aboutordering a tether strap.

*[SR20410(ALL)05/95] Front Seats

*[SR20420(ALL)05/95] To install a tether from a child safety seat in thefront seat:

*[SR20430(ALL)05/95] 1. Buckle the lap/shoulder belt (in the seatdirectly behind the front passenger seat inwhich the child safety seat will be installed).

*[SR20440(ALL)05/95] 2. Pull all the stored belt out of the rear seatretractor to switch the retractor to automaticlocking mode.

*[SR20450(ALL)05/95] 3. Let the retractor wind up the slack from thelap/shoulder belt.

*[SR20460(ALL)05/95] 4. Install the child safety seat in the front seat.Refer to the previous section on InstallingSafety Seats. Hook the tether strap hookaround the webbing near the center of theshoulder portion of the locked lap/shoulderbelt.

*[SR20470(ALL)05/95] 5. Tighten the tether strap.


35

*[SR20480(ALL)05/95] Rear Seats

[SR20490(ALL)06/95] If you use a tethered safety seat on one of therear seats, install a tether anchor bracket to oneof the two 0.3 inch (8 mm) weld nuts on therear of the cargo area below the opening for theliftgate.

[SR20500(ALL)05/95] Tether Anchorage Hardware

[SR20750(ALL)06/95] Tether anchor hardware kits can be obtained atno charge from any Ford or Lincoln-Mercurydealer.

[SR20770(ALL)05/95] Be sure to follow the child safety seatmanufacturer’s instructions.


Tighten the anchor according tospecifications. Otherwise, the safety seatmay not be properly secured and the childmay be injured in a sudden stop orcollision.

*[SR20800(ALL)02/91] Installing the Anchor Bracket

[SR21000(ALL)08/91] 1. Open the liftgate and take out the luggagecompartment cover (if equipped).

[SR21100(ALL)01/94] 2. The anchorage nuts used to secure the tetheranchor are located in the rear body panelbehind the trim at the rear of the luggagecompartment. Remove the trim panel. Thebackside of the panel is scored at thelocations of the anchorage nuts. Make a holethe size of the scoring in the trim panel toprovide access to the anchor nut. The holeshould be made on the same side of thevehicle as the child safety seat will belocated. Reinstall the trim panel.


36

[SR21155(ALL)01/94] 3. Install the hardware for anchoring the tetherfollowing the instructions in the tetheranchorage hardware kit.

[SR21175(ALL)08/91] 4. Re-install luggage compartment cover.

[SR21600(ALL)01/94]

half page art:0030027-C

Installing the anchor bracket


37

Starting Your Probe

*[ST01700(ALL)03/95] Ignition

*[ST01800(ALL)01/95] Understanding the Positions of the Ignition

[ST02050(ALL)01/92]


Ignition lock cylinder

*[ST02100(ALL)09/93] LOCK locks the steering wheel. It also locks thegearshift lever in P (Park) (automatic transaxle).

*[ST02200(ALL)01/95] LOCK is the only position that allows you toremove the key. The LOCK feature helps toprotect your vehicle from theft.

[ST02250(ALL)08/91] To remove the key if you have a manualtransaxle, push the key in while turning it to theLOCK position.

*[ST02300(ALL)05/95] If your key is stuck in the LOCK position andwill not turn, move your steering wheel left orright until the key turns freely.

[ST02350(ALL)01/94] ACC (Accessory) allows some of your vehicle’selectrical accessories to operate while the engineis not running.

File:prstp.exUpdate:Fri Jun 23 19:38:23 1995

38

*[ST02400(ALL)05/95] ON allows you to test your vehicle’s warninglights (except the brake system warning light) tomake sure they work before you start theengine. The key returns to the ON position oncethe engine is started and remains in this positionwhile the engine runs.

*[ST02500(ALL)03/95] START cranks the engine. Release the key oncethe engine starts so that you do not damage thestarter. The key should return to ON when yourelease it. The START position also allows youto test the brake warning light.

*[ST02505(ALL)09/93] Shift-lock System

*[ST02510(ALL)09/93] For your safety, the optional automatic transaxlehas the shift-lock system, which prevents shiftingthe transaxle out of the P (Park) position withoutdepressing the brake pedal when the ignitionswitch is in the ON position.

*[ST02515(ALL)07/89] To shift the transaxle out of the P (Park)position:

*[ST02521(ALL)05/90] 1. Depress and hold the brake pedal.

*[ST02526(ALL)11/93] 2. Start the engine.

[ST02528(ALL)01/94] 3. Push in the thumb button and move theshift selector lever.

[ST02530(ALL)06/93] 4. See Shift Lock Emergency Override in thissection for more information.


39

[ST02532(ALL)06/93]

two third page art:0032064-D

Automatic console-mounted gearshift lever

*[ST02535(ALL)09/93] NOTE: When the ignition key is in the ACCor LOCK position, the transaxle cannotbe shifted from the P (Park) position.If the brake pedal is repeatedlydepressed and released when theignition is in the ON position and theselector lever is in the P (Park)position, a chattering near the gearshiftlever may be heard. This is not amalfunction.


40

*[ST02538(ALL)03/94] NOTE: Your vehicle’s gearshift lever issecurely latched in P (Park) if youcannot move it without pushing in thethumb button. Keep the brake pedaldepressed while moving your gearshiftlever.

*[ST02540(ALL)09/93] To make the system more effective, the ignitionkey cannot be removed unless the gearshiftselector lever is in the P (Park) position.

[ST02545(ALL)06/93] Shift lock emergency override

[ST02550(ALL)01/94] If the gearshift selector lever should fail to movefrom the P (Park) position with the brake pedaldepressed, continue depressing the brake pedal.

[ST02557(ALL)06/93] 1. Remove the shift lock override cover with ascrewdriver.

[ST02563(ALL)06/93] 2. Insert the screwdriver into the shift lockoverride opening and push the screwdriverhandle down.

*[ST02570(ALL)06/93] 3. Push and hold the thumb button.

[ST02600(ALL)01/94] 4. Move the shift selector lever.

*[ST02690(ALL)06/95] If you need to shift out of P (Park) by using thealternate procedure described above, it ispossible that a fuse has blown and that yourbrakelamps may also not be functional. Pleaserefer to the chapter titled Servicing Your Probe inthis Owner Guide for instructions on checkingand replacing fuses.

*[ST02700(ALL)05/95] RWARNING

DO NOT DRIVE YOUR VEHICLE UNTILYOU VERIFY THAT THE BRAKELAMPSARE WORKING.


41

%*[ST02900(ALL)02/95] Removing the Key From the Ignition

*[ST03000(ALL)09/93] 1. Put the gearshift selector lever in P (Park)(automatic transaxle) or 1 (First) (manualtransaxle).

*[ST03100(ALL)01/95] 2. Set the parking brake fully.

[ST03400(ALL)01/94] 3. For a manual transaxle: Push in on the lockcylinder and turn the key from ACC toLOCK.

[ST03425(ALL)01/94] For an automatic transaxle: Turn the key toLOCK.

*[ST03500(ALL)03/95] 4. Remove the key.

*[ST03600(ALL)10/90] If the driver or passenger door is open while thekey is still in the ignition, a warning chimesounds.


Always set the parking brake fully andmake sure that the gearshift is securelylatched in P (Park) (automatic transaxle) orin 1 (First) (manual transaxle).


Do not leave children, unreliable adults,or pets alone in your vehicle. They couldaccidentally injure themselves or othersthrough inadvertent operation of thevehicle. Further, on hot, sunny days,temperatures in a closed vehicle couldquickly become high enough to causesevere and possibly fatal injuries topeople as well as animals.


42

%*[ST04100(ALL)03/95] Fuel-Injected Engines*[ST04200(ALL)03/95] When starting a fuel-injected engine, the most

important thing to remember is to avoidpressing down on the accelerator before orduring starting. Only use the accelerator whenyou have problems getting your vehicle started.See Starting Your Engine in this chapter fordetails about when to use the accelerator whileyou start your vehicle.

*[ST04500(ALL)03/95] Starting Your Vehicle%*[ST05000(ALL)05/94] Preparing to Start Your Vehicle


Do not start your vehicle in a closedgarage or other enclosed area. Never sit ina stopped vehicle for more than a shortperiod of time with the engine running.Exhaust fumes are toxic. See GuardingAgainst Exhaust Fumes in this chapter formore instructions.

*[ST05200(ALL)01/95] Before you start your vehicle, do the following:

*[ST05300(ALL)01/95] 1. Make sure you and all your passengersbuckle your safety belts. See Safety Restraintsin the Index for more details.

*[ST05400(ALL)03/95] 2. Make sure the headlamps and otheraccessories are turned off when starting.

*[ST05500(ALL)02/92] 3. If you have an automatic transaxle, makesure that the gearshift is in P (Park) and theparking brake is set before you turn the key.

*[ST05600(ALL)07/93] If you have a manual transaxle, make surethat the parking brake is fully set, push theclutch pedal to the floor, and put thegearshift into Neutral before you turn thekey. (Remember, the starter will operateonly if the clutch pedal is pushed all theway to the floor.)


43

*[ST05700(ALL)03/95] Testing the Warning Lights

*[ST05800(ALL)03/95] Before you start your vehicle, you should testthe warning lights on the instrument panel tomake sure that they work. Refer to the WarningLights and Gauges chapter.

*[ST06000(ALL)02/95] Starting Your Engine

*[ST06100(ALL)02/95] To start your engine:

*[ST06300(ALL)05/95] 1. Follow the steps under Preparing to StartYour Vehicle at the beginning of this section.

*[ST06320(ALL)03/95] 2. Keep your foot on the brake pedal and turnthe ignition key to the ON position.

*[ST06330(ALL)03/95] 3. DO NOT depress the accelerator pedal whenstarting your engine. DO NOT use theaccelerator while the vehicle is parked.

*[ST06340(ALL)02/95] 4. Turn the key to the START position(cranking) until the engine starts. Allow thekey to return to the ON position after theengine has started.

*[ST06400(ALL)02/95] If you have difficulty in turning the key,rotate the steering wheel slightly because itmay be binding.

%*[ST06430(ALL)04/95] For a cold engine:

*[ST06440(ALL)05/95] ❑At temperatures 10˚F (-12˚C) and below: Ifthe engine does not start in fifteen (15)seconds on the first try, turn the key to OFF,wait approximately ten (10) seconds so youdo not flood the engine, then try again.

*[ST06450(ALL)04/95] ❑At temperatures above 10˚F (-12˚C): If theengine does not start in five (5) seconds onthe first try, turn the key to OFF, waitapproximately ten (10) seconds so you do notflood the engine, then try again.


44

%*[ST06460(ALL)05/95] For a warm engine:

*[ST06470(ALL)04/95] ❑Do not hold the key in the START positionfor more than five (5) seconds at a time. Ifthe engine does not start within five (5)seconds on the first try, turn the key to theOFF position. Wait a few seconds after thestarter stops, then try again.

*[ST06480(ALL)05/95] Whenever you start your vehicle, release the keyas soon as the engine starts. Excessive crankingcould damage the starter or flood the engine.

*[ST06490(ALL)05/95] After you start the engine, let it idle for a fewseconds. Keep your foot on the brake pedal andput the gearshift lever in gear. Release theparking brake. Slowly release the brake pedaland drive away in the normal manner.

*[ST06500(ALL)05/95] NOTE: Your vehicle is equipped with anautomatic transaxle that has aninterlock that prevents you fromshifting out of P (Park) unless yourfoot is on the brake pedal.

%*[ST06510(ALL)04/95] If the engine does not start after two attempts:

*[ST06520(ALL)04/95] 1. Turn the ignition key to the OFF position.

*[ST06530(ALL)04/95] 2. Press the accelerator all the way to the floorand hold it.

*[ST06540(ALL)04/95] 3. Turn the ignition key to the START position.

*[ST06550(ALL)04/95] 4. Release the ignition key when the enginestarts.

*[ST06560(ALL)04/95] 5. Release the accelerator gradually as theengine speeds up. Then drive away in thenormal manner.

*[ST06570(ALL)04/95] If the engine still does not start, the fuel pumpshut-off switch may have been triggered. Fordirections on how to reset the switch see FuelPump Shut-Off Switch later in this chapter.


45

%*[ST06580(ALL)05/95] A computer system controls the engine’s idlespeed. When you start your vehicle, the engine’sidle speed normally runs high. These fasterengine speeds will make your vehicle moveslightly faster than its normal idle speed. Itshould, however, slow down after a short time.If it does not, have the idle speed checked.

*[ST06585(ALL)05/95] If the engine idle speed does not slow downautomatically, do not allow your vehicle to idlefor more than 10 minutes. Have the vehiclechecked.


Extended idling at high engine speeds canproduce very high temperatures in theengine and exhaust system, creating therisk of fire or other damage.


Do not park, idle, or drive your vehicle indry grass or other dry ground cover. Theemission system heats up the enginecompartment and exhaust system, whichcan start a fire.

%*[ST08700(ALL)06/95] Engine Block Heater (If equipped)

*[ST08900(ALL)03/95] Engine block heaters are strongly recommendedif you live in a region where temperatures reach-10˚F (-23˚C) or below. An engine block heaterwarms the engine coolant, which improvesstarting, warms up the engine faster, and allowsthe heater-defrost system to respond quickly.

*[ST09100(ALL)02/95] To turn the heater on, simply plug it into agrounded 110-volt outlet. Ford recommends thatyou use a 110-volt circuit that is protected by aground fault circuit interrupter.


46


To prevent electrical shock, do not useyour heater with ungrounded electricalsystems or two-pronged (cheater) adapters.

*[ST09300(ALL)03/95] For best results, plug the heater in at least threehours before you start your vehicle. Using theheater for longer than three hours will notdamage the engine, so you can plug it in atnight to start your vehicle the followingmorning.

%*[ST10000(ALL)03/95] If the Engine Cranks but DoesNot Start or Does Not Start Aftera Collision

*[ST10005(ALL)04/95] The Fuel Pump Shut-off Switch

[ST10010(ALL)01/95] If the engine cranks but does not start or doesnot start after a collision, the fuel pump shut-offswitch may have been triggered. The shut-offswitch is a device intended to stop the fuelpump when your vehicle has been involved in asubstantial jolt.

*[ST10015(ALL)03/95] Once the shut-off switch is triggered, you mustreset the switch by hand before you can startyour vehicle.


47

[ST10025(ALL)01/95]

three fourths page art:0030295-I

The location of the fuel pump shut-off switch


If you see or smell fuel, do not reset theswitch or try to start your vehicle. Haveall the passengers get out of the vehicleand call the local fire department or atowing service.


48

*[ST10035(ALL)03/95] If your engine cranks but does not start after acollision or substantial jolt:

*[ST10040(ALL)02/95] 1. Turn the key in the ignition to the LOCKposition.

*[ST10045(ALL)03/95] 2. Check under the vehicle for leaking fuel.

*[ST10050(ALL)01/95] 3. If you do not see or smell fuel, push the redreset button on the fuel pump shut-offswitch down.

[ST10052(ALL)04/95] The reset switch on your vehicle is located onthe left side of the luggage compartmentunder the carpet. The red reset button isunder the raised area of the rubber cover.

*[ST10055(ALL)02/95] 4. Attempt to start your vehicle. If the vehiclestarts, let it run a few seconds, then turn thekey to the LOCK position.

*[ST10060(ALL)03/95] 5. Check under the vehicle again for leakingfuel. If you see or smell fuel, do not startyour vehicle again. If you do not see orsmell fuel, you can try to start your vehicleagain.

%*[ST11700(ALL)05/95] Guarding Against Exhaust Fumes

*[ST11800(ALL)02/95] Carbon monoxide, although colorless andodorless, is present in exhaust fumes. Takeprecautions to avoid its dangerous effects.


Do not start your vehicle in a closedgarage or other enclosed area. Never sit ina stopped vehicle for more than a shortperiod of time with the engine running.Exhaust fumes are toxic. See GuardingAgainst Exhaust Fumes in this chapter formore instructions.


49


If you smell exhaust fumes inside yourvehicle, have your dealer inspect yourvehicle immediately. Do not drive if yousmell exhaust fumes.

*[ST12100(ALL)01/95] Have the exhaust and body ventilation systemschecked whenever:

*[ST12200(ALL)02/95] ❑your vehicle is raised for service

*[ST12300(ALL)02/95] ❑ the sound of the exhaust system changes

*[ST12400(ALL)01/95] ❑your vehicle has been damaged in a collision

*[ST12500(ALL)01/95] Improve your ventilation by keeping all air inletvents clear of snow, leaves, and other debris.

*[ST12600(ALL)03/95] If the engine is idling while you are stopped inan open area for long periods of time, open thewindows at least one inch (2.5 cm). Also, adjustthe heating or air conditioning to bring inoutside air.

[ST12800(ALL)08/91] ❑ If you are using the heater, set the fan speedon MEDIUM or HIGH with the functionselector control on VENT.

[ST13000(ALL)11/91] ❑ If you want to use the air conditioner, set thefunction selector control in the NORM A/Cposition which brings in fresh air.


51

Warning Lights andGauges

*[LG00600(ALL)01/95] The instrument panel (dashboard) on yourvehicle is divided into several different sections.The illustrations on the following pages showthe major parts of the instrument panel that aredescribed in this chapter. Some items shownmay not be on all vehicles.

*[LG00700(ALL)06/93] In your vehicle, the warning lights and gaugesare grouped together on the instrument panel.We call this grouping a cluster.

[LG00750(ALL)03/95] To clean the lenses on your instrument panel,use Ford Glass Cleaner and a soft cloth. Neveruse paper towels or abrasive cleaners; they canscratch the lenses.

*[LG00800(ALL)01/95] Your vehicle has a mechanical cluster.

File:prlgp.exUpdate:Fri Jun 23 19:38:06 1995

52

%*[LG01690(ALL)06/94]

Th

eM

echan

icalC

luster

[LG01700(ALL)01/92]

fullpageart:0032080-B

Mech

anical

cluster

File:prlgp.exU

pdate:Fri Jun 23 19:38:06 1995

53

[LG01750(ALL)05/95]

fullpageart:0032045-I

Warn

ing

light

locations

onth

em

echan

icalclu

ster

File:prlgp.exU

pdate:Fri Jun 23 19:38:06 1995

54

[LG01775(ALL)04/93] The mechanical cluster on the Probe GT model issimilar to the one shown. The two exceptionsare: the speedometer on the GT model shows140 mph (225 km/h) and it has a 7,000 rpmred-line tachometer.

[LG01780(ALL)01/92]


GT model speedometer and tachometer

[LG01800(ALL)01/94] The following warning lights and gauges are onthe cluster. All of the warning lights and gaugesalert you to possible problems with your vehicle.The following sections detail what each of theseindicators means.

*[LG01950(ALL)01/95] Indicator Lights and Chimes%*[LG01975(ALL)05/95] Safety Belt Warning Light and Chime

[LG01980(ALL)03/94] This warning light and chime remind you tofasten your safety belt. If you do not fasten yoursafety belt before the ignition is turned to ON,the chime will sound for 4 to 8 seconds and thewarning light will illuminate for 1 to 2 minutes,or until the safety belt is fastened. If you fastenthe safety belt before the ignition is turned toON, neither the light nor chime will activate.


55

[LG01995(ALL)01/92]

one inch art:0032097-A

Safety belt light

*[LG02000(ALL)01/95] Air Bag Readiness Light

*[LG02050(ALL)06/93] This light illuminates for six seconds when theignition is turned to the ON position. If the lightfails to illuminate, continues to flash, remains on,or if a series of five beeps is heard, have thesystem serviced as soon as possible.

[LG02100(ALL)01/92]


Air bag readiness light

*[LG02120(ALL)05/95] RWARNING

If any of these things happen, evenintermittently, have the air bag systemserviced at your Ford or Lincoln-Mercurydealer immediately.

*[LG02200(ALL)03/95] Brake System Warning Light

[LG02300(ALL)02/91] Your vehicle has a divided brake system. If onepart isn’t working, the other part can still workand stop you. For good braking, though, youneed both systems working well. If the warninglight goes on, there could be a problem. Haveyour brake system inspected right away.


56

[LG02350(ALL)01/94] This light should come on as you start thevehicle. If it doesn’t come on then, have it fixedso it will be ready to warn you if there’s aproblem.

[LG02550(ALL)06/93]

one inch art:0030319-E

Brake system and parking brake light

[LG02600(ALL)01/93] This light comes on briefly when you turn theignition key to START. It normally goes offshortly after the engine starts and you releasethe parking brake, but it may stay on for up to60 seconds. If the light stays on for longer than60 seconds or comes on after you have fullyreleased the parking brake, have the hydraulicbrake system serviced.

*[LG02650(ALL)02/94] This light will also come on if the parking brakedoes not release fully. If it does stay on after theparking brake is fully released, it means theremay be a brake problem. Pull off the road andstop carefully. You may notice that the pedal isharder to push, the pedal may go closer to thefloor, or it may take longer to stop the vehicle.Try the brakes again after you have stopped.


The BRAKE light indicates that the brakesmay not be working properly. Have thebrakes checked immediately.


57

%*[LG02750(ALL)02/95] Anti-Lock Brake System Warning Light

[LG02760(ALL)01/94] When the ignition switch is turned to the ONposition, the anti-lock brake system warninglight will come on. When the engine is started,the anti-lock brake system control unit willdetermine if all components of the system areoperating correctly. The warning light couldremain on for two to four seconds.

[LG02771(ALL)06/95]

one inch art:0032359-C

The anti-lock brake system warning light


If the anti-lock brake system warninglight remains on or comes on whiledriving, have the braking system checkedby a qualified service technician as soonas possible.

*[LG02785(ALL)06/95] NOTE: If a fault occurs in the anti-locksystem, and the brake warning light isnot lit, the anti-lock system is disabledbut normal brake function remainsoperational.

*[LG02790(ALL)09/93] NOTE: If your vehicle must be jump-startedbecause of a low battery, the anti-lockbrake system warning light couldremain on. This is due to low batteryvoltage and does not indicate amalfunction in the system. Under thesecircumstances, you should drive yourvehicle only after the battery has hadtime to charge and the light has goneout.


58

[LG04360(ALL)04/95] The Low Fuel Light

[LG04375(ALL)08/91] This light comes on when fuel level in your tankhas reached approximately 2-3 gallons (7-10liters).

[LG04395(ALL)01/92]


Low fuel light

*[LG04500(ALL)01/95] High Beam Light

*[LG04600(ALL)03/95] This light comes on when the headlamps areturned to high beam or when you flash thelights.

*[LG04700(ALL)01/92]


High beam light

%*[LG05300(ALL)03/95] Check Engine Warning Light

*[LG05400(ALL)05/95] This light comes on when the electronic enginecontrol system is not working properly. This isthe computer system that controls the operatingconditions of the engine.

*[LG05450(ALL)09/93]

one inch art:0030175-B

Check engine warning light


59

*[LG05600(ALL)05/95] This light comes on briefly when you turn theignition to the ON position, but should turn offwhen the engine starts. If the light does notcome on when you turn the ignition to the ONposition or if it comes on and stays on whenyou are driving, have your vehicle serviced assoon as possible. This indicates a possibleproblem with one of the engine’s emissioncontrol systems. You do not need to have yourvehicle towed in.

*[LG05800(ALL)05/95] If the light turns on and off briefly while youare driving, it means that the condition is nolonger present.

[LG05885(ALL)06/93] O/D OFF Light (If equipped)

[LG05886(ALL)05/95] This light tells you that the overdrive off (O/DOFF) button on the shift selector has beenpushed. When the light is on, the transaxle willnot shift into overdrive. Depressing the buttonon the shift selector again will return the vehicleto “overdrive on” mode. The transaxle will be inthe “overdrive on” mode when the vehicle isstarted even if the O/D OFF mode was selectedwhen the vehicle was last shut off.

[LG05888(ALL)06/93] If the light does not come on when the O/DOFF button is pressed, or if the light flasheswhen you are driving, have your vehicleserviced at the first opportunity. If this conditionpersists, damage could occur to the transaxle.

[LG05889(ALL)01/94]


Overdrive OFF light


60

*[LG05890(ALL)10/93] Gauges

*[LG05900(ALL)01/95] Fuel Gauge

*[LG06000(ALL)01/95] The fuel gauge displays approximately howmuch fuel you have in the fuel tank.

*[LG06025(ALL)05/93] The ignition must be turned off while puttingfuel in the tank in order to get a correct fuelgauge reading after the ignition is turned on.

*[LG06075(ALL)05/93] The fuel gauge indicator may vary slightly whilethe vehicle is in motion. This is the result of fuelmovement within the tank. You can get a moreaccurate reading with the vehicle on smooth,level ground.

[LG06100(ALL)01/89] Charging System Gauge

[LG06200(ALL)05/95] This gauge tells you your battery’s voltage whenyou turn your ignition key to ON. When youstart your engine, the pointer should move tothe NORMAL range if you are not operatingany electrical accessories. (If electrical accessoriesare operating and the engine is not running, thepointer may move into the red area).

[LG06300(ALL)01/94] If the pointer moves into the red area when noelectrical accessories are operating, have thevehicle’s electrical system checked.

*[LG06310(ALL)05/94] Engine Oil Pressure Gauge

[LG06330(ALL)05/95] The gauge needle should stay in the NORMALrange (indicating normal engine oil pressure). Ifthe needle drops below the NORMAL range intothe low range, there is a loss of oil pressure.

[LG06335(ALL)11/91] If this happens:

*[LG06340(ALL)01/95] 1. Pull off the road as soon as safely possible.

*[LG06350(ALL)04/95] 2. Shut off the engine immediately or severeengine damage could result.


61

[LG06360(ALL)05/95] 3. Check the oil level when the vehicle is onlevel ground.

[LG06370(ALL)11/91] 4. Add only as much oil as the engine needsbefore you drive the vehicle again. Do notoverfill the oil reservoir. For moreinformation, see Adding engine oil in theIndex.

*[LG06400(ALL)01/95] Engine Coolant Temperature Gauge

*[LG06500(ALL)03/95] This gauge indicates the temperature of theengine coolant, not the coolant level. If thecoolant is not at its proper level or mixture, thegauge indication will not be accurate.

*[LG06600(ALL)03/94] The pointer usually moves from C (cold) intothe NORMAL band as your vehicle warms up.Under most driving conditions, the pointershould stay in the NORMAL band. If you aredriving in heavy traffic or on an extended gradein hot weather, the pointer may reach to the topof the NORMAL band.

*[LG06700(ALL)05/95] If, under any circumstances, the pointer movesabove the NORMAL band, the engine coolant isoverheating and continued operation may causeengine damage.

*[LG06800(ALL)01/95] If your engine coolant overheats:

*[LG06900(ALL)03/95] 1. Pull off the road as soon as it is safelypossible.

*[LG07000(ALL)04/95] 2. Shut off the engine immediately or severeengine damage could result.

*[LG07100(ALL)05/95] 3. Let the engine cool.

*[LG07200(ALL)03/95] 4. Check the coolant level following theinstructions on checking and adding coolantto your engine. (See Engine coolant in theIndex.) If you do not follow theseinstructions, you or others could be injured.


62

*[LG07250(ALL)03/95] For instructions on checking and adding coolantto your engine, see Engine coolant in the Index. Ifyou do not follow these instructions, you orothers could be injured.

*[LG07300(ALL)05/92] 5. Add as much coolant as your engine needs.If the engine continues to overheat, have thecoolant system serviced.

*[LG07500(ALL)01/95] Speedometer

*[LG07600(ALL)01/95] The speedometer tells you how many miles(kilometers) per hour your vehicle is moving.

*[LG07700(ALL)01/95] Odometer

*[LG07800(ALL)01/95] The odometer tells you the total number of miles(kilometers) your vehicle has been driven.

*[LG08000(ALL)11/94] Trip Odometer

[LG08050(ALL)01/95] Use the trip odometer to track your mileage.Simply set the trip odometer to zero by pressingthe reset button.

*[LG09000(ALL)02/95] Tachometer

[LG09001(ALL)01/95] The tachometer indicates approximate enginerevolutions per minute, and is located on theright-hand side of the instrument cluster. Thetachometer pointer may move slightly when thekey is placed in the ACC or ON position, withthe engine off. This pointer movement is normal,and will not affect the accuracy of thetachometer once the engine is running.


63

Instrument Panel Controls

[IP00800(ALL)05/95] The main controls for the climate control system,clock, and radio are on the instrument panel.

File:pripp.exUpdate:Fri Jun 23 19:37:35 1995

64

[IP00850(ALL)06/94]

fullpageart:0032028-G

Instru

men

tp

anel

File:pripp.exU

pdate:Fri Jun 23 19:37:35 1995

65

%*[IP00875(ALL)05/95] NOTE: Any cleaner or polish that increases thegloss (shine) of the upper part of theinstrument panel should be avoided.The dull finish in this area is to helpprotect the driver from undesirablewindshield reflection.

*[IP00900(ALL)05/95] The Climate Control System

*[IP01000(ALL)02/91] Heating Only System (Without AirConditioning)

[IP01100(ALL)01/95] Function selection

[IP01300(ALL)05/95] The heater in your vehicle has three controlsused for air direction, temperature and fanspeed. The function selector control lets youdirect heated or unheated air through theinstrument panel registers, or down to the floor.It also allows you to vent your vehicle withoutside air.

[IP01400(ALL)02/93]

one third page art:0032040-C

Heating only system control panel

[IP01800(ALL)04/95] Turning the function selector control all the wayto the right (V) directs air to defroster ventsand the side window defoggers only.

[IP01900(ALL)04/95] With the function selector control in the MIXposition, air is directed out the defrosters, sidedefoggers and the floor heater outlets.


66

[IP02000(ALL)08/91] The FLOOR position directs air out the flooroutlets and the side window defoggers.

[IP02025(ALL)01/95] Ventilate your vehicle with outside air bychoosing the VENT position.

[IP03325(ALL)06/94] Temperature control

[IP03330(ALL)11/91] The air temperature can be adjusted by movingthe marker on the temperature control to the redarea for warm air, or to the blue area forunheated air. The air will become warmer orcooler depending on how far the control isturned.

[IP03400(ALL)06/94] Fan speed control

[IP03500(ALL)04/95] Fan speed can be controlled by turning thecontrol from LO to HI.

*[IP03600(ALL)06/94] Turning On the Heat

*[IP03800(ALL)10/93] To heat the inside of your vehicle:

[IP03850(ALL)08/91] 1. Turn the function selector control to FLOOR.

[IP03900(ALL)08/91] When FLOOR is selected, air is directedthrough the floor registers, and a little air isalso directed at the windshield and sidewindows to help prevent fogging.

[IP03975(ALL)08/91] 2. Turn the temperature control all the way tothe right in the red area, or to the desiredtemperature.

[IP04000(ALL)08/91] 3. Set the fan at the desired speed.


67

*[IP04300(ALL)01/89] Defrosting the Windshield and SideWindows

[IP04500(ALL)04/95] 1. Turn the function selector control to thedefrost position.

[IP04550(ALL)04/95] When V is selected, air is directed to thewindshield and side windows.

[IP04600(ALL)08/91] 2. Turn the temperature control to the desiredtemperature.

*[IP04650(ALL)10/93] 3. Set the fan at the desired speed.

*[IP04700(ALL)01/89] Heating and Defrosting at the Same Time

[IP05000(ALL)08/91] 1. Set the function selector control to MIX.

[IP05100(ALL)01/89] 2. Set the temperature and fan speed asdesired.

*[IP05200(ALL)01/94] Ventilating Your Vehicle With Outside Air

*[IP05300(ALL)01/93] On mild days, you may want to ventilate yourvehicle with outside air. To open the vents:

[IP05450(ALL)08/91] 1. Turn the function selector control to VENT.

[IP05475(ALL)08/91] When VENT is selected, air is directed out ofthe panel registers.

[IP05550(ALL)08/91] 2. Turn the temperature control to the desiredtemperature.

*[IP05600(ALL)01/89] 3. Set the fan speed as desired.


68

*[IP05800(ALL)12/91] Tips for Controlling the Temperature inYour Vehicle

*[IP05900(ALL)03/94] ❑To vary the temperature inside your vehicle,move the temperature selector toward the redarea for warmer air and toward the blue areafor cooler air.

*[IP06000(ALL)03/94] ❑ If you drive with the fan off and thewindows closed, the windows may fog up.To prevent fogging:

[IP06150(ALL)04/95] 1. Set the function selector control to VENT,MIX, FLOOR or the V position.

*[IP06200(ALL)01/89] 2. Set the desired temperature.

*[IP06300(ALL)01/89] 3. Set the desired fan speed.

*[IP06400(ALL)12/91] ❑Do not put objects under the front seats thatwill interfere with the flow of air to the backseats.

*[IP06500(ALL)12/03] ❑Remove any snow, ice, or leaves from thearea below the windshield on the outside ofyour vehicle. They could block the air intake.

*[IP06600(ALL)06/93] Air Conditioning System (If equipped)

[IP06850(ALL)01/95] Operate the air conditioning by using the climatecontrols on the center of the instrument panel.

[IP06900(ALL)08/91]


Air conditioning controls


69

*[IP06950(ALL)01/95] Sometimes you may notice slight engine surgingif you have the air conditioner on. This isnormal, as the system is designed to cycle thecompressor on and off to maintain desiredcooling. The reduced compressor operationshould benefit fuel economy.

*[IP07000(ALL)01/95] On some vehicles with air conditioning,wide-open throttle acceleration will temporarilycut off the air conditioning.

*[IP07050(ALL)01/95] Since the air conditioner removes a lot ofmoisture from the air during operation, it isnormal for water to drip on the pavement underthe air conditioner drain after you have stoppedthe vehicle.

[IP07150(ALL)08/91] Action for heating and windshield defrosting areidentical for cars equipped with either theHeating Only System or the Heating and AirConditioning System. For instructions about thesefunctions, see the previous section, Heating OnlySystem. For instructions about using the airconditioning, see the following sections.

[IP07350(ALL)01/95] MAX A/C[IP07360(ALL)01/95] When MAX A/C is selected, cooled interior air

is recirculated through the system. This positionis more efficient than NORM A/C.

*[IP07375(ALL)09/93] To cool your vehicle quickly in warm weather:

[IP07400(ALL)08/91] 1. Turn the function selector control to MAXA/C.

[IP07450(ALL)08/91] 2. Turn the temperature control to the blue(cool) area.

[IP07475(ALL)08/91] 3. Set the fan at the desired speed.

*[IP07500(ALL)09/93] If the inside of your vehicle is very warm,drive for a few minutes with the windowsdown. This forces most of the hot, stale airout of the vehicle and helps the airconditioning cool the vehicle faster.


70

[IP07550(ALL)01/95] Because MAX A/C uses recirculated air, MAX isusually more efficient than NORM A/C. Youcan switch to outside air (NORM A/C) at anytime, especially after the vehicle has cooleddown.

[IP07560(ALL)11/91] You will notice a slight odor when using theMAX A/C position. This is normal. If the odorbecomes annoying, switch the function selectorto NORM A/C.

[IP07575(ALL)08/91] To provide the most quiet operation when usingMAX A/C, reduce the fan speed after acomfortable temperature has been reached.

[IP07800(ALL)04/95] NORM A/C

[IP08025(ALL)01/94] When maximum air conditioning is not needed,you can use the NORM A/C position to coolyour vehicle with outside air. Cooling yourvehicle this way brings in outside air and isquieter, but it is less efficient.

[IP08050(ALL)05/95] To cool your vehicle using outside air:

[IP08075(ALL)08/91] 1. Turn the function selector control to NORMA/C.

[IP08150(ALL)08/91] 2. Turn the temperature control all the way toleft to the blue (cool) area.

*[IP08175(ALL)10/93] 3. Set the fan at the desired speed.

[IP08400(ALL)01/95] In mild weather, setting the function selectorcontrol in the VENT position will add cool air toyour vehicle without using the air conditioning.You will get better fuel economy without usingthe air conditioning.


71

*[IP13850(ALL)02/91] Engine Idle Speed Control System

*[IP13875(ALL)02/91] Genuine Ford air conditioning (eitherfactory-installed or dealer-installed) has anengine idle speed control system thatcompensates for engine speed loss that mayoccur when the air conditioning compressor isrunning. This idle speed control holds the engineidle essentially constant, regardless of whetherthe air conditioning system is on or off.

[IP13890(ALL)01/95] NOTE: Whenever service to the airconditioning system is required, makesure the service facility uses arefrigerant recycling system. Thesesystems will capture the refrigerant forreuse. Releasing certain refrigerantsinto the atmosphere is hazardous to theenvironment.

*[IP13900(ALL)12/93] Rear Window Defroster (If equipped)(Standard in Canada)

[IP14000(ALL)06/94]

quarter page art:0032068-D

Rear window defroster button

[IP14200(ALL)01/95] The defroster for the rear window clears frost,fog, or thin ice from both the inside and outsideof the rear window. The rear window defrosterbutton is located on the lower right of theinstrument panel below the climate controlpanel. This button is also used to activate yourheated power mirrors (if equipped).


72

*[IP14300(ALL)02/95] To defrost the rear window:

*[IP14400(ALL)02/95] 1. Clear any snow from the rear window.

*[IP14500(ALL)09/93] 2. Get in your vehicle and start the engine.

[IP14600(ALL)03/91] 3. Press the rear defrost button. The indicatorlight turns on.

[IP14800(ALL)01/92] The defroster turns off automatically after 15 to25 minutes. If the window is not clear, turn onthe defroster again. It will also automaticallyshut off any time the engine is shut off.

%*[IP14900(ALL)03/94] NOTE: Never use sharp instruments orwindow cleaners with abrasives toclean the inside of your rear window.If you do, you may damage the heatingelements that are bonded to the insideof the rear window and cause damageto the rear window defroster.

*[IP17700(ALL)01/92] Interior Lights

*[IP20500(ALL)01/95] Lighting Up the Interior and InstrumentPanel

*[IP20600(ALL)01/92] With the parking lamps or headlamps on, thebrightness of the instrument panel lighting canbe adjusted.

*[IP20700(ALL)09/93] To brighten or dim the instrument panellighting, rotate the dimmer control thumbwheelas desired.

[IP20800(ALL)01/94]

quarter page art:0030050-B

Dimmer control thumbwheel


73

[IP20900(ALL)01/94] The dimmer control thumbwheel is located tothe left of the steering wheel on the instrumentpanel.

[IP21800(ALL)02/91] Dome Lamp

[IP22950(ALL)05/95] The dome lamp illuminates whenever one of thefront doors is opened and turns offautomatically when the doors are closed. Youmay turn the dome lamp on and off while thedoors are closed by using the ON/OFF switchlocated on the interior/map lamp control panel.

[IP23100(ALL)05/95]

half page art:0030286-L

Interior/map lamp control panel

[IP23125(ALL)04/95] Map lamps (if equipped)

[IP23150(ALL)01/95] The map lamps can be turned on by using theinterior/map lamp control panel located betweenthe sun visors.

[IP23200(ALL)01/95] There are two map lamps, one for the driverand one for the passenger. To turn on the maplamp, push the button that is next to the lamp.


74

Push the buttons again to turn the map lampsoff.

[IP23210(ALL)05/95]


[IP23225(ALL)04/95] Cleaning the Interior Lamps

*[IP23250(ALL)04/95] Your interior dome lamps and map lamps areplastic and should be cleaned with a milddetergent diluted in water. Rinse them with clearwater.

*[IP23300(ALL)04/95] Fog Lamps (If equipped)

[IP23400(ALL)05/93] The fog lamps only operate when the headlampsare on low beam. To activate fog lamps, pushthe button on the control panel below theclimate controls. An indicator light on the buttonwill illuminate. Push the button again to turnthe fog lamps off.


75

[IP23500(ALL)05/95]

quarter page art:0032079-E

Fog lamp button

*[IP24200(ALL)05/95] Radio

*[IP24300(ALL)04/95] For information about the radio in your vehicle,refer to the Ford Electronic Sound SystemsOperating Guide in this Owner Guide.

*[IP24400(ALL)04/95] Clock Controls on ElectronicRadios

*[IP24500(ALL)05/94] The electronic radios have a built-in clock. Forcomplete operating instructions, refer to the FordElectronic Sound Systems Operating Guide in thisowner guide.

*[IP24550(ALL)05/92] Radio Antenna

[IP24600(ALL)05/92] The radio antenna is mounted on the rearpassenger side quarter panel of the vehicle. It isa fixed mast antenna and cannot be retracted.


77

Steering Column Controls

*[SC00300(ALL)01/95] The controls on the steering column and wheelare designed to give you easy access to thecontrols while you are driving.

*[SC00400(ALL)01/95] The Turn Signal Lever

*[SC00500(ALL)01/95] You can use the turn signal lever on the left sideof the steering column to:

*[SC00600(ALL)08/91] ❑operate the headlamps and parking lamps

*[SC00700(ALL)03/95] ❑operate the turn signals and cornering lamps

*[SC00800(ALL)01/95] ❑ turn the high beams on/off

*[SC00900(ALL)05/95] ❑ flash the lamps

*[SC00950(ALL)08/91] Headlamps and Parking Lamps

*[SC00975(ALL)01/92] To turn the parking lamps or headlamps on,twist the knob at the end of the turn signallever.

[SC01000(ALL)05/95] FIRST STOP — Turning the knob to the firststop (g) will turn on the the license platelamps, parking lamps, side marker lamps, taillamps and instrument panel lamps.

[SC01050(ALL)05/95] SECOND STOP — Turning the knob to thesecond stop (B) will turn on the headlamps,license plate lamps, parking lamps, side markerlamps, tail lamps and instrument panel lamps.

File:prscp.exUpdate:Fri Jun 23 19:37:07 1995

78

[SC01105(ALL)08/91]

quarter page art:0032032-A

Headlamp control

*[SC01110(ALL)01/95] Daytime Running Light System

*[SC01115(ALL)03/95] (Canadian vehicles only)

*[SC01120(ALL)05/95] In Canada, certain regulations require vehicles tobe driven with lights illuminated during daytimeoperation. It is for that reason that the daytimerunning lights are automatically illuminatedwhen the ignition switch is turned to the ONposition. The daytime running lights areswitched off under the following conditions:

*[SC01130(ALL)05/95] ❑when the headlamps are switched on

*[SC01140(ALL)01/92] ❑when the parking brake is applied

*[SC01150(ALL)01/92] ❑when the flash-to-pass system is used

*[SC01175(ALL)05/95] RWARNING

The Daytime Running Light (DRL) systemwill not illuminate the tail lamps andparking lamps. Turn on your headlampsat dusk. Failure to do so may result in acollision.


79

[SC01200(ALL)08/91] Raising the Headlamps Manually

[SC01250(ALL)01/95] If the power headlamp door system becomesinoperative, your vehicle has a manual retractorsystem that allows you to raise the headlampsmanually (the headlamps will not turn on). Theretractors are located under the hood and behindeach headlamp. Remove the cap and turn theknob. Each headlamp must be raised separately.

[SC01255(ALL)02/92] Before using the manual retractors to raise yourheadlamps, the RETRA fuse must be removed.

[SC01260(ALL)03/94] Open the main fuse panel. Refer to theunderhood fuse panel in Servicing Your Probelater in this owner guide. Pull the RETRA (20A)fuse straight out.

[SC01270(ALL)02/92] Inspect the removed fuse. If it is blown, replaceit with a new one of the same rating. If it isn’tblown or if a new fuse does not solve theproblem, remove it and operate the headlampmanually.

[SC01280(ALL)05/95] RWARNING

Always remove the RETRA (20A) fusebefore manually operating a headlampretractor or attempting to remove anythingfrom the headlamp. Failure to remove theRETRA fuse could cause injury to a handor fingers.

[SC01290(ALL)05/95] RWARNING

When reinstalling the RETRA fuse, makesure nothing is near the headlampretractor. It may move suddenly while thefuse is being inserted, causing injury tohands and fingers.


80

[SC01300(ALL)02/92]


Manual headlamp retractors located behind the headlamps

*[SC02075(ALL)05/95] High Beams and Flashing the Lamps

*[SC02080(ALL)05/95] To turn on the high beams, turn the headlampcontrol knob to the headlamp ON position andpush the turn signal lever away from you untilit latches. When the high beams are ON, thehigh beam indicator light on the instrumentpanel comes on.

*[SC02085(ALL)05/95] To turn off the high beams, pull the levertoward you until it latches. The high beamindicator light turns off.


81

*[SC02090(ALL)05/95] Flashing the Lights

*[SC02091(ALL)06/95] To flash the headlamps, pull the lever towardyou for a moment and then release it. Theheadlamps will flash whether the headlampknob is in the on or off position.

[SC02093(ALL)08/91]


Highbeam and flash-to-pass operation

[SC02095(ALL)11/91] If the headlamps are retracted when you pullthe lever toward you, they will pop up andflash.

%*[SC02097(ALL)05/95] Cleaning the Exterior Lamps

*[SC02098(ALL)05/95] Do not use dry paper towel, chemical solventsor abrasive cleaners to clean the lamps, as thesemay cause scratches or crack the lamps.

%*[SC02100(ALL)03/95] Hazard Flasher

*[SC02200(ALL)09/93] To alert other drivers to hazardous situations,press the flasher switch on the top of thesteering column. All the turn signals will flashon and off at the same time. The flashers willalso operate while the brake pedal is applied. Toturn the hazards off, press the switch again.

*[SC02300(ALL)01/94] The flashers work whether your vehicle isrunning or not. The flashers will work for up totwo hours when the battery is fully charged andin good condition. They will not drain thebattery excessively unless they are left on for anextended period of time.


82

[SC02475(ALL)04/95] If the flashers run for longer than 2 hours whileyour engine is not running, or if your battery isnot fully charged, your battery could be drained.

[SC02500(ALL)08/91]


Hazard warning flasher switch


83

*[SC02600(ALL)01/95] Turn Signals

*[SC02650(ALL)03/95] Move the lever up to signal a right turn. Moveit down to signal a left turn. The correspondingindicator light in the instrument cluster willflash.

[SC02710(ALL)01/95] If the turn signal stays on after you turn, movethe lever back to the center (OFF) position.

*[SC02720(ALL)03/95] For lane changes, move the lever far enough tosignal but not to latch. The lever will return tothe off position when you release it.

[SC03000(ALL)11/91]


Turn signal


84

*[SC03100(ALL)03/95] Windshield Wipers and Washer

*[SC03200(ALL)08/91] To operate the windshield wipers and washers,make sure your ignition key is turned to the ONposition.

[SC03600(ALL)01/92] The windshield wipers have two speeds. Tooperate the wipers, pull down the lever on theright side of your steering column. The firstposition is LO (Low) and the second position isHI (High). To turn the wipers off, return thelever to the uppermost position.

[SC04050(ALL)02/92]

quarter page art:0032071-C

Windshield wiper control

[SC04100(ALL)01/94] ONE-TOUCH WIPER CONTROL (If equipped)— For one wiping cycle, push the lever awayfrom you and release it with the lever in theOFF or interval position. The ignition switchmust be in the ON position for this operation.

[SC04150(ALL)01/92]


One touch wiper control


85

[SC04220(ALL)11/91] Interval Wipers (If equipped)

[SC04240(ALL)08/91] In addition to two speed wipers, your vehiclemay have wipers that you can set to operate atvarying intervals. For example, you can set theinterval so they wipe less often when it drizzlesand more often in heavier rain.

[SC04260(ALL)01/92]


Variable interval wiper control

[SC04280(ALL)11/91] To set the interval wipers, pull the lever downto the first position. Turn the ring on the leverto the frequency of wiper operation you desire.

*[SC04300(ALL)05/95] Windshield Washer

[SC04425(ALL)01/92] To clean the windshield, pull the wiper levertoward you. Washer fluid sprays until the leveris released.

[SC04450(ALL)01/92]


Windshield washer/control


86

[SC04550(ALL)05/95] If the washer does not work, check the washerfluid level visually and fill if needed. SeeServicing Your Probe later in this owner guide. Ifthere is fluid in the reservoir, and your washerdoesn’t work, consult your Ford orLincoln-Mercury dealer.

*[SC04700(ALL)01/95] Do not try to clean the windshield when thewasher fluid container is empty or activate thewashers at any time for more than 15 secondscontinuously. This could damage the washerpump system.


In freezing weather, the washer solutionmay freeze on the windshield and obscureyour vision. Always warm up thewindshield with the defroster before youuse the washer fluid. If you cannot seethrough the windshield clearly, it canincrease the risk of being involved in acollision.


87

*[SC05000(ALL)01/95] Horn

*[SC05200(ALL)08/91] To sound the horn, push the horn button oneither side of the steering wheel. Check the hornregularly to be sure it operates properly.

[SC05450(ALL)08/91]


Using the horn


88

*[SC05500(ALL)10/91] Tilt Steering Column(If equipped)


Never adjust the steering column/wheelwhen the vehicle is moving. You couldlose control of the vehicle and injuresomeone.

*[SC05520(ALL)04/95] To change the position of the steeringcolumn/wheel, pull the release lever on thecolumn toward you. Tip the steering wheel tothe desired position. Release the lever to lock thesteering wheel in place.

[SC05900(ALL)08/91]


Tilt steering column


89

*[SC06000(ALL)03/91] Speed Control (If equipped)*[SC06050(ALL)06/95] If your vehicle has speed control, you can

automatically maintain a constant speed at orabove 30 mph (50 km/h).

*[SC06060(ALL)05/95] Use of radio transmitting equipment that is notFederal Communications Commission (FCC) orin Canada the Canadian Radio andTelecommunications Commission (CRTC)approved may cause the speed control tomalfunction. Therefore, use only properlyinstalled FCC (CRTC in Canada) approved radiotransmitting equipment in your vehicle.

[SC06100(ALL)06/94]


Speed control switches on the steering wheel

*[SC06150(ALL)03/95] To set the speed control:

[SC06250(ALL)01/95] 1. Press the ON switch and release itimmediately.

*[SC06300(ALL)06/95] 2. Accelerate to the desired speed above30 mph (50 km/h) using the acceleratorpedal.


90

[SC06400(ALL)01/95] 3. Press SET ACC and release it immediately toset your speed. If you keep this buttondepressed, your speed will continue toincrease.

*[SC06450(ALL)06/95] 4. Take your foot off the accelerator pedal.Your vehicle will maintain the speed you set.

*[SC06500(ALL)06/95] If you drive up or down a steep hill, yourvehicle may momentarily slow down or speedup, even though the speed control is on. This isnormal.

[SC06510(ALL)05/95] NOTE: If your vehicle is equipped with anautomatic transaxle, and if your speedincreases above your set speed whiledriving in Overdrive on a downhillgrade, you may want to turn theOverdrive off and use Drive. You mayturn the Overdrive off by pressing theOverdrive off (O/D OFF) button. Thiswill reduce vehicle speed. Speedcontrol cannot reduce the vehicle speedif it goes above your set speed on adownhill grade.

[SC06520(ALL)01/94] NOTE: If your vehicle is equipped with a5-speed manual transaxle, and if yourspeed increases above your set speedwhile driving in 5 (Fifth) gear on adownhill grade, you may want to shiftto 4 (Fourth) gear to reduce vehiclespeed. Depressing the clutch pedalcancels speed control, therefore speedcontrol must be reset by pressing theSET ACC or RSM switches. Speedcontrol cannot reduce the vehicle speedif it goes above your set speed on adownhill grade.


91


Do not use the speed control in heavytraffic or on roads that are winding,slippery, or unpaved.

%*[SC06600(ALL)06/95] Accelerating With the Speed ControlOperating

*[SC06650(ALL)03/95] If you want to speed up momentarily or regainpreset speed on hills when the speed control isoperating, simply accelerate using the acceleratorpedal. Manually accelerating to a higher speeddoes not interfere with the speed control; whenyou take your foot off the accelerator, thevehicle returns to the set speed.

[SC06660(ALL)03/94] You can also speed up by pressing the SET ACCbutton. Release the button when the vehicle hasaccelerated to the desired speed.

*[SC06750(ALL)03/95] NOTE: If your vehicle has a 5-speed manualtransaxle, you may want to drive in 4(Fourth) gear in mountainous areas orat high altitudes to improve speedcontrol performance.

[SC06800(ALL)05/95] NOTE: When driving uphill, especially with aheavy load, significant speed dropsmay occur. If the speed drops morethan 8 to 14 mph (15-25 km/h) theautomatic speed control will, bydesign, be cancelled. You may need tocontrol your speed manually whiledriving up steep grades in order tomaintain the selected speed.


92

[SC06850(ALL)05/95] NOTE: If your vehicle has an automaticoverdrive transaxle, you may want todrive with the Overdrive off whendriving in hilly terrain or at highaltitudes. You may turn the Overdriveoff and use Drive by pressing theOverdrive off (O/D OFF) button. Thiswill improve speed controlperformance.

*[SC06900(ALL)01/95] Resetting the Speed Control

[SC06950(ALL)05/95] To reset the speed control to a lower speed,press and hold the CST switch. Let your vehicleslow down to the desired speed and release theCST switch.

[SC06975(ALL)01/94] If you have a 2.0L automatic transaxle vehicleyou may reset the vehicle speed control to alower speed by pushing, and then quicklyreleasing, the CST switch. Each time you do this,the set speed will decrease by 1 mph(1.6 km/h). See Tap Up and Tap Down in thischapter.

[SC07000(ALL)05/95] To reset the speed control to a higher speed, youcan follow one of these procedures:

[SC07050(ALL)01/94] ❑Accelerate to the desired speed using theaccelerator pedal, then press the SET ACCswitch and release it immediately.

[SC07100(ALL)01/94] ❑Press and hold the SET ACC switch until thevehicle accelerates to the desired speed, thenrelease the switch.

[SC07125(ALL)01/94] ❑Push, and then quickly release, the SET ACCswitch. Each time you do this, the set speedwill increase by 1 mph (1.6 km/h). (NOTE:This feature is only available on 2.0Lautomatic transaxle vehicles.) See Tap Up andTap Down in this chapter.


93

*[SC07150(ALL)04/95] To Cancel Speed Control

*[SC07200(ALL)06/95] You can cancel the speed control while you aredriving.

[SC07250(ALL)05/93] Press the brake pedal or clutch pedal (manualtransaxle) slightly. The speed control iscancelled, but you can reset it by pressing SETACC or RSM.

%*[SC07300(ALL)05/95] To Turn Off the Speed Control System

[SC07350(ALL)01/94] Press the OFF switch. The speed control systemis off and will remain off until you press the ONswitch and reset the speed control.

*[SC07400(ALL)05/95] In addition, the speed control is turned off eachtime you turn the vehicle off.

%*[SC07450(ALL)06/95] Cancelling and Resuming a Set Speed

[SC07500(ALL)04/95] If you press the brake pedal, the clutch pedal(manual transaxle), or shift the transaxle into N(Neutral) the speed control is suspended. Youcan return to the speed you set by using theRSM switch.

*[SC07550(ALL)06/95] To resume the speed you had before, you mustbe driving at least 30 mph (50 km/h).

*[SC07600(ALL)05/93] Press and release the RSM switch. Your vehiclegradually returns to the previously set speedand then maintains it.


94

[SC07625(ALL)06/93] Tap Up and Tap Down (2.0L vehicles withautomatic transaxle only)

[SC07635(ALL)04/95] Tap Up and Tap Down is a new feature which,like SET ACC and CST, can be used to eitherincrease or decrease the set speed. Speedchanges are made in 1 mph (1.6 km/h)increments. Once the speed has been set bypressing the ON and the SET ACC switches, theset speed may be increased by 1 mph(1.6 km/h) by a momentary tap of the SET ACCbutton. The set speed can be reduced by 1 mph(1.6 km/h) by a momentary tap of the CSTbutton. Multiple taps will cause the set speed toincrease or decrease in increments of 1 mph(1.6 km/h). For example, if the current set speedis 60 mph (100 km/h) five taps of the ACCswitch will increase the vehicle speed and SET itat 65 mph (105 km/h).


95

Features

*[FV00250(ALL)02/95] Your vehicle has a variety of features designedfor your comfort, convenience and safety. Readthis chapter to find out about standard andoptional features.

*[FV00400(ALL)01/95] Doors[FV00700(ALL)04/95]

quarter page art:0030072-C

The outside of the door

[FV00800(ALL)06/94]


The inside of the door

[FV00900(ALL)01/89] If you close the door with the lock buttondepressed, the door will remain locked.

File:prfvp.exUpdate:Fri Jun 23 19:36:28 1995

96

*[FV02400(ALL)04/95] Power Door Locks (If equipped)

[FV02500(ALL)01/94] If your vehicle has power door locks, thecontrols to lock the doors are below the insidedoor handles on each door. When you close thedoors after you set the door locks, the doorsremain locked. If the power mechanism everfails, the manual door locks will override thepower controls.

[FV02550(ALL)02/92] NOTE: Vehicles equipped with power lockshave a safety feature which allows youto unlock one or both front doors fromeither door key lock cylinder. Tounlock the driver’s or passenger dooronly, insert the key in the door lockcylinder and turn to the left(counterclockwise) to the first position.To unlock the other door at the sametime, simply continue turning the keyto the left to the second position. Bothdoors are locked by turning the key tothe right (clockwise).


97

[FV02600(ALL)06/94]


Power locks on the driver’s door

[FV02920(ALL)08/91] Remote Keyless Entry System(If equipped)

[FV02940(ALL)01/94] Your vehicle may be equipped with a remotekeyless entry system. This option will allow youto open your vehicle using a remote transmitterfrom distances of up to 33 feet (10 meters) away.The remote feature will operate only when theignition is in the OFF position.

[FV02950(ALL)06/94] The transmitter can unlock the driver’s door,unlock all doors, lock all doors, or activate thevehicle’s horn and hazard warning lamps for thepanic alarm feature.

[FV02960(ALL)05/95] By pressing the UNLOCK button on thetransmitter once, you can unlock the driver sidedoor. Pressing the UNLOCK button a secondtime within five seconds of unlocking thedriver’s door will unlock the other doors.


98

[FV02970(ALL)05/95] You can lock all your vehicle doors by pressingthe LOCK button. If you press the LOCK buttona second time within five (5) seconds, the hornwill sound briefly to verify that the doors havebeen locked.

[FV02990(ALL)06/94] When the PANIC button is pressed, the hornwill sound and the hazard warning lamps willflash. This will continue for up to approximatelytwo minutes and 45 seconds unless it is turnedoff by pressing the PANIC button a second time.The panic mode can also be cancelled by turningthe ignition key to ON or ACC.

[FV03000(ALL)05/95] Up to four transmitters can be programmed foryour vehicle. Your vehicle comes with twotransmitters. Additional transmitters can beordered from your dealer.

[FV03050(ALL)01/95]


Remote keyless entry transmitter

[FV03052(ALL)06/95] The remote keyless entry system is equippedwith an illuminated entry system. This system isactivated by opening the door.

[FV03054(ALL)06/95] When the system is activated, the dome lampwill illuminate, and will stay lit forapproximately 25 seconds. The dome lamp willshut off when the doors are closed.


99

%*[FV03055(ALL)02/95] Replacing the batteries

*[FV03060(ALL)01/95] The remote entry transmitter is powered by twocoin type three-volt lithium 1616batteries (included) that should last for severalyears of normal use. If you notice a significantdecrease in operating range, the batteries shouldbe replaced. Replacement batteries can bepurchased at most pharmacies, watch stores orat your Ford or Lincoln-Mercury dealer.

*[FV03065(ALL)02/95] NOTE: The operating range of the remoteentry system can also be affected byweather conditions (such as very coldtemperatures) or structures around thevehicle (buildings, other vehicles, radioand TV towers, etc.). Typical operatingrange will allow you to be up to 33feet (10 meters) away from yourvehicle.

[FV03070(ALL)01/92]


Opening the remote transmitter


100

[FV03075(ALL)01/92] The transmitter can be snapped apart to replacethe batteries by twisting a thin coin between thetwo halves of the transmitter. DO NOT TAKETHE FRONT PART OF THE TRANSMITTERAPART. Carefully remove the old batteries.When installing the new batteries, be sure toplace the positive (+) side down as marked.Snap the two halves back together.

%*[FV03080(ALL)02/95] Replacement/additional transmitters

[FV03082(ALL)05/95] In the event a transmitter is lost, return theremaining transmitter(s) to your dealer forreprogramming of your remote entry system.This is necessary to prevent unauthorized use ofthe lost transmitter.

*[FV03084(ALL)01/95] Additional transmitters may be purchased fromyour dealer (remote entry system will work withup to four transmitters). Follow the sameprogramming procedure as above.

[FV03085(ALL)06/94] All transmitters must be programmed (orreprogrammed) at the same time. If theprogramming mode is entered and thetransmitters are not programmed (orreprogrammed) at the same time, they will notoperate with the system.

*[FV03090(ALL)04/94]



101

*[FV03175(ALL)02/95] Windows

*[FV03200(ALL)03/95] Operating the Windows Manually

*[FV03300(ALL)07/93] The side windows on your vehicle can be raisedor lowered manually by turning the hand cranklocated on each door.

*[FV03400(ALL)08/91] NOTE: If you notice buffeting or pulsation(wind shock) with either side windowopen, you should open the oppositewindow slightly to reduce thecondition.

*[FV03550(ALL)03/91] Using the Power Windows (If equipped)

[FV03600(ALL)11/91] Each door has a power control that opens andcloses the window on that door. The driver’sdoor has a master control panel that operatesboth windows.

[FV03750(ALL)05/95] To use your power windows, your ignitionswitch must be placed in the ON position. Pressthe recessed end of the power window switch tolower a window, press the raised end of theswitch to raise a window.

%*[FV03800(ALL)02/95] NOTE: Your vehicle is equipped with a “onetouch down” feature. This featureallows the driver to fully open thedriver’s window by firmly pressing theswitch and then releasing. The switchwill release when the window hasfully opened.

*[FV03900(ALL)05/95] RWARNING

Do not let children play with the powerwindows. They may seriously hurtthemselves. Make sure occupants are clearof the window(s) before closing.


102

[FV04000(ALL)06/94]


Master window control on the driver’s door

*[FV04600(ALL)02/95] Moon Roof (If equipped)[FV04650(ALL)01/92] The control switch for the sliding moon roof is

on the interior/map lamp control panel locatedabove the windshield and between the sunvisors. The ignition must be in the ON positionfor the moon roof to be operational.

[FV04700(ALL)11/91] To open the sliding moon roof to the ventposition, push the recessed part of the moonroof switch until the back of the moon roof tiltsinto the vent position. You must release theswitch after opening the vent before pressing itagain to slide the moon roof open. To close,push the other side of the switch until the moonroof sets back into place.


103

[FV04800(ALL)01/92]


Sliding moon roof control switch

[FV04900(ALL)08/91] Press the switch until the moon roof is openedto the desired position. When you release theswitch, the moon roof will stop sliding open. Toclose the moon roof, press the other side of theswitch and hold it until the roof is closed to thedesired position.

*[FV05600(ALL)01/95] Seats


Never adjust the driver’s seat or seatbackwhen the vehicle is moving.


To reduce the risk of serious injury in acollision, always drive and ride with yourseatback upright and the lap belt snugand low across the hips.


104


To reduce the risk of serious injury in acollision, children should always ride withthe seatback upright.

*[FV05625(ALL)04/95] Head Restraints

[FV05650(ALL)01/95] Head restraints help protect your head and neckin a collision. The head restraints on yourvehicle are not adjustable.

[FV05700(ALL)05/95] Manual Seat Adjustments

[FV05800(ALL)05/95] You can move the front seats forward orbackward or tilt the back of the seat forward orbackward. The driver’s seat also has controls forlumbar support (if equipped) and side bolstersupport (if equipped).

[FV05900(ALL)05/95]

half page art:0032072-F


105

*[FV06000(ALL)05/95] To move the seat forward or backward:

[FV06100(ALL)05/95]

three fourths page art:0032073-E

Manual seat controls for front seats


106

*[FV06800(ALL)01/92] To recline the seatback:

[FV06850(ALL)05/95]

three fourths page art:0032389-A


107

[FV12300(ALL)05/95] To gain access to the rear seat on the driver’s orpassenger’s side:

[FV13600(ALL)05/95]

one third page art:0032066-D

Seatback release lever for rear seat access

[FV13625(ALL)05/95] The seatback will return to its set reclinedposition when pushed back.


A seatback which is folded forward evena small degree may not lock properly inthe event of a sudden stop or collision.


108

[FV13670(ALL)05/95] To inflate the driver’s seatback lumbarsupport (if equipped) for lower back support, orto inflate the driver’s seatback side bolstersupports (if equipped):

[FV13850(ALL)05/95]



109

[FV13890(ALL)05/95] Six-Way Power Seat Adjustment(if equipped)

[FV14000(ALL)05/95] The six-way power seat control lever is locatedon the outermost side of the driver’s seat.

[FV14500(ALL)05/95]

three fourths page art:0032062-D


110

[FV14600(ALL)01/89] Your seat cushion power adjust lever is operatedby a motor. To avoid damage to the motor, youshould avoid operating this feature for anextended period of time. You should also avoidusing the six-way power adjust levercontinuously with the engine stopped. Thiscould run down the battery.

[FV14700(ALL)02/92] Use the lever to make only one adjustment at atime.

*[FV14800(ALL)11/94] Using the Split-Folding Rear Seat

*[FV14900(ALL)11/94] Your vehicle is equipped with split-folding rearseats. One or both rear seatbacks can be foldeddown to provide additional cargo space.

[FV14950(ALL)02/92] NOTE: When folding down the rear seatback,the seat belt tongue should be hangingon the hook of the lower, side trimpanel, near the edge of the side of theseat cushion.


111

[FV15000(ALL)01/92] To lower the rear seatback:

[FV15050(ALL)05/95]


[FV15300(ALL)05/95] To raise the seatback, lift the seatback rearwarduntil it latches. Make sure the seatback is lockedin position by pushing it forward and backward.


Securely latch the seatback in the uprightposition to prevent the seatback or objectsfrom being thrown forward during asudden stop or collision.


Do not pile cargo higher than theseatbacks to avoid injuring people in acollision or sudden stop.


112


Do not remove the floor carpet in yourvehicle. Emission controls cause highexhaust temperatures under the floor.

[FV18150(ALL)11/91] NOTE: When returning the folding seats to theupright position, remember to returnrear shoulder belts to their properposition.

[FV18175(ALL)03/94] NOTE: Your vehicle has stowage hooks on therear, lower, side trim panel on whichto hook the safety belts when not inuse. Simply hook the tongue slot overthe stowage hook.

[FV18180(ALL)04/95] Cleaning the Seats

*[FV18185(ALL)05/95] Leather

*[FV18190(ALL)05/95] For routine cleaning, wipe the surface with asoft, damp cloth. For more thorough cleaning,wipe the surface with a leather and vinyl cleaneror a mild soap.

%*[FV18192(ALL)04/95] Fabric

*[FV18194(ALL)05/95] Remove dust and loose dirt with a whisk broomor a vacuum cleaner. Remove fresh spotsimmediately. Follow the directions that comewith the cleaner.

*[FV18196(ALL)04/95] NOTE: Before using any cleaner, test it on asmall, hidden area of fabric. If thefabric’s color or texture is adverselyaffected by a particular cleaner, do notuse it.


113

*[FV18200(ALL)01/95] Mirrors


The side view mirror on the right makesobjects appear smaller and farther awaythan they actually are.

[FV20200(ALL)05/95] Dual-Electric Remote Control Mirrors(If equipped)

[FV20250(ALL)03/94] Dual-electric remote control mirrors arecollapsible. The mirror heads can be foldedrearward to prevent damage when using anautomatic car wash.

*[FV20300(ALL)04/95] To adjust the side mirrors:

[FV20400(ALL)08/91] 1. Locate the control switch in the powercontrol panel on the driver’s door.

[FV20600(ALL)01/89] 2. Select the right or left mirror by moving theselector switch right or left.

[FV20700(ALL)01/89] 3. Push the control switch in the direction youwant to move the mirror.

[FV20900(ALL)01/89] 4. Return the selector switch to the middle OFFposition to keep the mirror in place.


114

[FV21000(ALL)06/94]


Dual-electric side mirror control switches

*[FV21600(ALL)01/95] Console[FV21700(ALL)03/94] A fully-equipped console on your vehicle will

include the following items:

[FV21800(ALL)01/92] ❑ashtray and lighter

[FV22200(ALL)01/92] ❑parking brake lever

[FV22250(ALL)01/92] ❑cupholder or storage compartment withcupholder


115

*[FV24500(ALL)01/95] Storage Compartments

*[FV24600(ALL)01/95] Your vehicle may have several small storagecompartments:

[FV24700(ALL)08/91] ❑a glove compartment that locks and unlocksusing the ignition key

*[FV24800(ALL)09/93] ❑ two map pockets on the door panels (ifequipped)

[FV24825(ALL)03/94] ❑ storage compartment below the climatecontrols

*[FV25550(ALL)11/91] ❑a storage bin in the center console


Do not put objects on the ledge betweenthe back seat and the rear window, asthey can become dangerous projectiles andinjure someone.

[FV25900(ALL)01/92] Center Console Storage (If equipped)

[FV25950(ALL)04/93] To open the center console storage bin, push thebutton and slide the lid back. When it is back asfar as it will go, push the button and lift the lid.

[FV25955(ALL)06/94] Cupholders

[FV25960(ALL)06/94] The cupholders are located inside the centerconsole storage bin. The driver cupholder isintegrated in the storage bin. To use thepassenger cupholder, rotate it upward then twistthe cupholder until it is in a horizontal position.When the passenger cupholder is not in use,twist it back to the vertical position and rotate itinto the storage bin.

*[FV25970(ALL)06/94] NOTE: Do not place heavy objects in thecupholders.


116

[FV25980(ALL)06/94]


Using the cupholders

*[FV27200(ALL)03/95] Hatchback

*[FV27400(ALL)05/95] Opening and Closing the Hatchback

[FV27500(ALL)05/95] To open the hatchback from the outside:

[FV27850(ALL)01/92] 1. Put the key into the lock located on the rightside, in the tail lamp just above the bumper.

[FV27900(ALL)10/90] 2. Turn the key to the right to unlock.

[FV28100(ALL)05/95] 3. Remove the key before you close thehatchback.

[FV28125(ALL)01/92] NOTE: When the hatch is unlocked the cargolamp will illuminate.

*[FV28200(ALL)05/95] 4. Using both hands, shut the hatchbackcompletely. Do not slam it.

*[FV28300(ALL)05/95] 5. Pull up on the hatchback to make sure it issecurely latched.


117

*[FV28500(ALL)07/93] To prevent premature wear or damage to thehatchback lift cylinders and attaching hardware,the hatchback must be fully closed before youdrive your vehicle.


If you drive with the hatchback lid open,you will draw dangerous exhaust fumesinto your vehicle.

[FV28610(ALL)05/95] If you must drive like this, keep the vents openso outside air comes into the vehicle.

[FV28700(ALL)04/95] Using the Remote Control for theHatchback

[FV28900(ALL)05/95] To release the hatchback from inside the vehicle,simply pull up on the remote release lever,which is located in front of the driver’s seat,near the door.

[FV29000(ALL)01/92]


Remote control for the hatchback


118

[FV29101(ALL)10/89] Using the Luggage Compartment Cover

[FV29120(ALL)10/89] This cover lets you conceal cargo in the luggagecompartment. The cover will lift automaticallywhen the hatchback lid is opened.

[FV29500(ALL)05/95] RWARNING

Do not place objects on the luggagecompartment cover, as they can becomedangerous projectiles and injure someone.

*[FV29600(ALL)11/91] To remove the luggage compartment cover:

*[FV29700(ALL)12/89] 1. Raise the hatchback to the fully openposition.

[FV29800(ALL)01/94] 2. Standing outside the vehicle, unfasten the liftcords from the hatchback lid.

[FV29850(ALL)02/93] 3. Disconnect the two front package tray liftcords from the lower trunk side trim.

[FV30000(ALL)02/93] 4. Lower the cover and slide it rearward todisengage it from the sockets and remove it.


119

[FV30100(ALL)03/94]


The luggage compartment and cover


The cover may cause injury in a suddenstop or accident if it is left lying loose inthe vehicle or if it is not securelyinstalled. Therefore, the cover shouldeither be securely installed or removedfrom the vehicle. To be securely installed,the cover must be attached to the bracketsand all four cords must be fastened.


120

*[FV30700(ALL)11/91] To install the luggage compartment cover:

*[FV30800(ALL)12/89] 1. Raise the hatchback to the fully openposition.

[FV30900(ALL)01/89] 2. From outside the vehicle, position the coverin its sockets.

[FV31100(ALL)07/89] 3. Attach the lift cords to the hatchback lid.

[FV31150(ALL)05/95] 4. Connect the two front luggage compartmentcover lift cords to the lower trunk side trim.

*[FV31200(ALL)12/89] 5. Close the hatchback.


Do not push down on the luggagecompartment cover when the lift cords areattached to the open hatchback lid. Thiscould cause the hatchback lid to closeunexpectedly.


121

Electron

icS

oun

dS

ystems

*[AS00950(ALL)04/95]

fullpageart:0060648-B

Com

pact

Disc

Rad

io

File:prasp.exU

pdate:Fri Jun 23 19:35:26 1995

122

%*[AS00975(ALL)05/95] Compact Disc Radio

*[AS01000(ALL)05/95] The Compact Disc Radio combines the ElectronicStereo Radio with the Ford Compact Disc Player.

*[AS01300(ALL)04/95] Using the Controls on Your New Radio/CDPlayer

*[AS01400(ALL)04/92] Most of the features of this unit work for bothradio and CD operation, depending on whichmode the unit is in. Also, some of the buttonscontrol several different functions, so be sure toread all of the operating instructions carefully.

*[AS01500(ALL)04/95] How to turn the radio on and off

*[AS01600(ALL)04/95] Press the “POWER” button to turn the radio on.Press it again to turn it off.

*[AS01625(ALL)04/95] How to adjust the volume

*[AS01650(ALL)05/95] Press the (+/S) side of the “VOL” button toincrease/decrease the volume. Bars illuminate inthe display to show the relative volume level.

*[AS01675(ALL)04/95] NOTE: If the volume level is set above acertain listening level when theignition switch is turned off, when theignition switch is turned back on, thevolume will come back to a “nominal”listening level. However, if the radiopower is turned off (with the“POWER” button), the volume willremain in the position it was set atwhen radio power is switched back on.

*[AS01700(ALL)04/95] Selecting the AM or FM frequency band

*[AS01800(ALL)04/95] Push the “AM/FM” button to select the desiredfrequency band. When in the radio mode,pushing the button more than once will alternatebetween AM, FM1 and FM2. These functions areused with the station memory buttons describedunder How to tune radio stations.

File:prasp.exUpdate:Fri Jun 23 19:35:26 1995

123

%*[AS01900(ALL)05/95] How to tune radio stations

*[AS02000(ALL)04/95] There are four ways for you to tune in aparticular station. You can manually locate thestation using the “SCAN/TUNE” button,“SEEK” the station, “SCAN” to the station orselect the station by using the memory buttons,which you can set to any desired frequency.These four methods are described below.

*[AS02100(ALL)04/95] ❑Using the “SCAN/TUNE” button to manuallytune

[AS02200(ALL)04/95] You can change the frequency up or downone increment at a time (FM changes inincrements of 200kHz; AM changes inincrements of 10kHz) by first pressing the“SCAN/TUNE” button twice (display shows“TUNE”), then — within approximately fiveseconds —pressing and releasing either thetop (b) or bottom (a) half of the “SEEK”button. To change frequencies quickly, pressand hold down either the top or bottom halfof the “SEEK” button.

*[AS02300(ALL)04/95] Manual tuning adjusts your radio to anyallowable broadcast frequency, whether ornot a station is present on that frequency.(See All About Radio Frequencies in thissection.)

*[AS02400(ALL)04/95] ❑Using the “SEEK” function

*[AS02500(ALL)04/95] This feature on your radio allows you toautomatically select listenable stations up ordown the frequency band. Press the top ahalf of the “SEEK” button to select the nextlistenable station up the frequency band.Press the bottom b half of the button toselect the next listenable station down thefrequency band. By pressing and holding thebutton, listenable stations can be passed overto reach the desired station.


124

*[AS02600(ALL)04/95] ❑Using the “SCAN/TUNE” button to scanradio stations

*[AS02700(ALL)04/95] Pressing the “SCAN/TUNE” button onceenters the scan mode (display will indicate“SCN”). Pushing the top a half of the“SEEK” button will begin the scan mode upthe frequency band, stopping on eachlistenable station for approximately fiveseconds. Pushing the bottom b half of the“SEEK” button will begin the scan modedown the frequency band, again stopping oneach listenable station for approximately fiveseconds.

*[AS02800(ALL)04/95] To stop the scan mode on the presentlysampled station press the “SCAN/TUNE”button again.

*[AS03000(ALL)04/95] ❑Setting the Station Memory Preset buttons

%*[AS03100(ALL)04/95] Your radio is equipped with 5 stationmemory buttons. These buttons can be usedto select up to 5 preset AM stations and 10FM stations (5 in FM1 and 5 in FM2). Followthe easy steps below to set these buttons tothe desired frequencies.

*[AS03200(ALL)04/95] 1. Select a band, then select a frequency.

*[AS03400(ALL)04/95] 2. Press one of the memory buttons and holdthe button until the sound returns. Thatstation is now held in memory on thatbutton.

*[AS03500(ALL)04/95] 3. Follow the two steps above for each stationmemory preset button you want to set.

*[AS03601(ALL)04/95] NOTE: If the vehicle’s battery is disconnected,the clock and station memory presetbuttons (if programmed in auto mode)will need to be reset.


125

*[AS03701(ALL)04/95] ❑Using the Automatic Memory Load feature

*[AS03801(ALL)04/95] You can activate the Auto Memory Loadfeature by pressing and holding the “AUTOPRESET” button for approximately threeseconds. Auto Memory Load sets all memorybuttons in AM, FM1 and FM2 sequentially byseeking out the first five strong stations forthe respective band and storing them inmemory buttons 1-5. (FM2 will store thesecond set of strong stations from the FMband.)

*[AS03901(ALL)05/95] With Auto Memory Store, you cancontinually set strong stations into yourmemory buttons without losing your existingmemory presets, which is especially handywhile traveling. Your radio will automaticallyset your memory buttons to the strong localstations so you don’t have to continuallymanually tune to existing stations.

*[AS04001(ALL)05/95] Activate Auto Memory Store by pushing the“AUTO PRESET” button once. Your radiowill set the first five strong stations of theband you are in (AM, FM1 or FM2) into thememory buttons. The display will show“AUTO”, then run through the frequencies,stopping momentarily on the stations beingset into the memory buttons. The radio isnow in the “AUTO” mode and this displaywill show “AUTO” each time a preset isactivated.

*[AS04101(ALL)05/95] NOTE: If there are fewer than five strongstations in the frequency band, theremaining unfilled buttons will storethe last strong station detected on theband.


126

*[AS04201(ALL)05/95] After all stations have been filled, the radiowill begin playing the station stored onmemory button 1.

*[AS04301(ALL)04/95] To deactivate the Auto Memory Store modeand return to the manually-set memorybutton stations (or those stations set usingAuto Memory Load), simply push the“AUTO PRESET” button. Display will show“AUTO” then “OFF”. The next time AutoMemory Store is activated on that band, theradio will store the next set of five strongstations.

*[AS04400(ALL)04/95] Using the “AUDIO” button to adjust thetone balance and speaker output

*[AS04500(ALL)04/95] ❑ Increasing or decreasing bass response

*[AS04600(ALL)04/95] Push the “AUDIO” button repeatedly untilthe display reads “BASS.” Push the “+” sideof the “VOL” button to increase bass (more“lows”), and push the “-” side to decreasebass (less “lows”).

*[AS04700(ALL)04/95] ❑ Increasing or decreasing treble response

*[AS04800(ALL)04/95] Push the “AUDIO” button repeatedly untilthe display reads “TREB.” Push the “+” sideof the “VOL” button to increase treble (more“highs”), and push the “-” side to decreasetreble (less “highs”).

*[AS05100(ALL)04/95] ❑Adjusting speaker balance

*[AS05200(ALL)04/95] Balance control allows you to adjust thesound distribution between the right and leftspeakers. Push the “AUDIO” buttonrepeatedly until the display reads “BAL.”Push the “+” side of the “VOL” button toshift the sound to the right speakers, andpush the “-” side to shift the sound to theleft speakers.


127

*[AS05300(ALL)04/95] ❑Adjusting speaker fader

*[AS05400(ALL)04/95] Fade control allows you to adjust the sounddistribution between the front and rearspeakers. Push the “AUDIO” buttonrepeatedly until the display reads “FADE.”Push the “+” side of the “VOL” button toshift the sound to the front speakers, andpush the “-” side to shift the sound to therear speakers.

*[AS05500(ALL)04/95] NOTE: Illuminated bars in the display showrelative levels of bass and treble andpositions of speaker balance and faderfunctions after adjustments are made,then revert to volume level set.

%*[AS05600(ALL)04/95] Clock operation

*[AS05700(ALL)04/95] When in the radio mode, push the “CLOCK”button to switch from radio frequency to clock.Only the clock numerals will be displayed in theclock mode — there is no A.M./P.M. indication.When in the clock mode, the time will bedisplayed until the button is pushed again.However, if you retune the radio while it is inthe clock mode, the new radio frequency will bedisplayed for approximately ten seconds andthen change back to clock.

*[AS05800(ALL)04/95] When in the CD mode, push the “CLOCK”button to change the display from elapsed timemode to track number mode to clock mode. Ifthe CD track selection is changed when you arein the clock or elapsed time mode, the new tracknumber will be displayed for approximately tenseconds and then revert back to the previousmode.

*[AS05900(ALL)04/95] To set the clock, simultaneously press the“CLOCK” button and either the bottom (b) halfof the “SEEK” button to set hours, or the top(a) half of the “SEEK” button to set minutes.


128

*[AS07000(ALL)04/95] Using the Controls on Your New CompactDisc Player

*[AS07100(ALL)04/95] Your new Ford Compact Disc Player is capableof playing 12 cm or 8 cm discs, without anadapter! The Player operates when the power ison and a disc is inserted (label side up). Handlethe disc by its edge only. (Be sure to read andfollow all of the care and cleaning instructionsunder How To Take Care of and Clean Your CDPlayer and Discs.

*[AS07200(ALL)04/95] NOTE: If after you insert a disc, the disc isejected and “ERROR” begins scrollingin the display, remove the disc andreinsert it right side up (label side up).

*[AS07300(ALL)04/95] The digital display on your CD player willeither show the track (selection) number or theelapsed time. (The display mode can be selectedby pressing the “CLOCK” button.) Indicators forplay (a), stop (X) and compression on (“C”)are also in the display. (These features aredescribed later.)

*[AS07400(ALL)04/95] Once a disc is inserted, operation of the CDplayer will override that of the radio.

*[AS07500(ALL)04/95] NOTE: The volume, bass, treble, balance andfader controls on the radio are alsoused with the CD player. Refer toearlier operating instructions on thesecontrols.

*[AS07600(ALL)04/95] How to insert a disc and begin play

[AS07700(ALL)05/94] Insert one disc, label side up into the discopening. When inserted, the disc automaticallyloads into the unit and play starts at thebeginning of the first track (selection).

*[AS07800(ALL)04/95] When the disc reaches the end, the disc playerautomatically returns to the beginning of thedisc and resumes playing.


129

*[AS07900(ALL)04/95] NOTE: Once a disc is inserted, the discopening is secured to prevent theaccidental insertion of a second disc.

*[AS08000(ALL)04/95] NOTE: The CD player has heat protectioncircuitry to protect the laser diode. Ifthe temperature of the player reaches167˚F (75˚C), the heat detection circuitwill shut off the player and “TOOHOT” will scroll in the display forapproximately five seconds (radio willresume playing). When the temperaturereturns to normal operating range, theCD player will again be operational.

*[AS08100(ALL)04/95] How to stop and restart the CD player

*[AS08200(ALL)04/95] When a disc is loaded, the unit automaticallyenters the play mode and the play indicator ailluminates. To stop temporarily, press the“PLAY/STOP” button or the “AM/FM” button.The stop indicator X in the display illuminatesand operation returns to the radio mode. Toresume CD play, press the “PLAY/STOP”button once again.

*[AS08300(ALL)04/95] NOTE: If the ignition key is turned OFFduring play and then is set to the ONor ACCESSORY position, the CDplayer will resume playing in the modeit was in when ignition was turned off.

*[AS08310(ALL)04/95] Using the “SEEK” feature

*[AS08320(ALL)04/95] The “SEEK” feature allows you to quickly find aparticular selection on the disc.

*[AS08330(ALL)05/95] Press the bottom (b) half of the “SEEK” buttononce to repeat the current playing selection.Press the top (a) half of the “SEEK” button toadvance to the next selection.


130

*[AS08350(ALL)05/95] Pressing and holding the bottom (b) or top (a)half of the “SEEK” button will scroll backwardand forward respectively through the tracks.

*[AS08400(ALL)05/95] How to fast forward or reverse your CDplayer

*[AS08500(ALL)05/95] To quickly search for a particular point in aselection, press the “FF” button (to fast forward)or the “REV” button (to reverse). While eitherbutton is pressed, the disc goes forward orbackward at two different speeds depending onhow long the button is held down. (Pressingeither button for more than approximately threeseconds will speed up the process.) Release thebutton at the desired point (found by watchingthe elapsed playing time in the display or bylistening to the sound during fast forward orreverse). When you have reached the beginningof track 1, the CD player will begin playing.

*[AS08600(ALL)04/95] When you have reached the end of the disc bykeeping the fast forward button pressed, thedisplay will show “END” and the player will gointo pause mode. Push the “PLAY/STOP”button to begin playing the first track of thedisc, press the “REV” button to back up fromthe end of the disc, or use the “SEEK” functionto locate a desired track.

*[AS08700(ALL)04/95] Using the “SCAN” function

[AS08800(ALL)05/94] Press the “SCAN/TUNE” button to enter thescan mode. Once in the scan mode, press the top(b) or bottom (a) half of the “SEEK” button toscan forward or reverse, respectively. The CDplayer will begin scanning the disc, stopping oneach listenable track for approximately aneight-second sampling. This continues until youpress the “SCAN/TUNE” button a second time.


131

*[AS09500(ALL)04/95] How to eject the disc

*[AS09600(ALL)04/95] Push the “EJECT” button to stop play, eject thedisc and resume radio operation of your audiosystem.

*[AS09700(ALL)04/95] NOTE: You can eject the disc while the radiopower and/or ignition is on or off.

%*[AS09710(ALL)04/95] How To Take Care of and Clean Your CDPlayer and Discs

*[AS09720(ALL)04/95] To ensure the continued performance of yourFord Compact Disc Player, carefully read thefollowing precautions:

*[AS09730(ALL)04/95] ❑Always handle the disc by its edge. Nevertouch the playing surface.

*[AS09740(ALL)04/95] ❑Before playing, inspect the disc for anycontamination. If needed, clean the disc withan approved disc cleaner, such as theDiscwasherH Compact Disc Cleaner or theAllsop 3H Compact Disc Cleaner, by wipingfrom the center out to the edges. Do not usea circular motion to clean.

*[AS09750(ALL)04/95] ❑Do not clean discs with solvents such asbenzine, thinner, commercially availablecleaners or antistatic spray intended foranalog records.

*[AS09760(ALL)04/95] ❑Do not expose the disc to direct sunlight orheat sources such as defroster and floorheating ducts. Do not leave any discs in aparked car in direct sunlight where there maybe a considerable rise in temperature ordamage may result.


132

*[AS09765(ALL)04/95] ❑After playing, store the disc in its case.

*[AS09770(ALL)04/95] ❑ If a disc has already been inserted, do not tryto insert another disc. Doing so may damagethe disc player.

*[AS09780(ALL)04/95] ❑Do not insert anything other than a disc intothe disc player.

*[AS09790(ALL)04/95] CAUTION: The use of optical instruments withthis product will increase eye hazard as the laserbeam used in this compact disc player isharmful to the eyes. Do not attempt todisassemble the case. Refer servicing to qualifiedpersonnel only.

*[AS09800(ALL)04/95] Common Operating Conditions of YourCD Player

*[AS09810(ALL)04/95] The following information is designed to helpyou recognize typical situations that could bemistakenly interpreted as mechanicalmalfunctions of the disc player.

*[AS09820(ALL)04/95] ❑A disc is already loaded.

*[AS09830(ALL)04/95] ❑The disc is inserted with the label surfacedownward.

*[AS09840(ALL)04/95] ❑The disc is dusty or defective.

*[AS09850(ALL)04/95] ❑The player’s internal temperature is above140˚F (60˚C). Allow the player to cool offbefore operating.

*[AS09869(ALL)04/95] ❑Different manufacturers of compact discs mayproduce discs with different dimensions ortolerances, some of which may not be withinindustry standards or in accordance with theCD format. Because of this, a new disc that isfree of dust and scratches could be defectiveand may not play on your Ford CompactDisc Player.


133

*[AS09870(ALL)04/95] If play does not begin after the CD button ispushed:

*[AS09880(ALL)04/95] ❑The radio is not on.

*[AS09890(ALL)04/95] ❑The unit is in the stop mode.

*[AS09900(ALL)06/95] ❑Moisture may have condensed on the lenseswithin the unit. If this occurs, remove thedisk and wait approximately an hour untilthe moisture evaporates.

*[AS09910(ALL)04/95] If the sound skips:

*[AS09920(ALL)04/95] ❑Badly scratched discs or extremely roughroads will cause the sound to skip. Skippingwill not damage the disc player or scratch thediscs.


134

*[AS21300(ALL)05/95]

Electron

icS

tereoan

dS

tereoC

assetteR

adios

*[AS21330(ALL)04/95]

fullpageart:0060586-C

Electron

icS

tereoR

adio

File:prasp.exU

pdate:Fri Jun 23 19:35:26 1995

135

*[AS21360(ALL)04/95]


Electron

icS

tereoR

adio

with

Cassette

File:prasp.exU

pdate:Fri Jun 23 19:35:26 1995

136

*[AS21400(ALL)02/95] Using the Controls on Your New Radio

*[AS21500(ALL)02/95] How to turn the radio on and adjust thevolume

*[AS21701(ALL)04/95] Press the “POWER” button to turn the radio on.Press it again to turn it off.

*[AS21950(ALL)05/95] Press the right (+) side of the “VOLUME”button to increase the volume. Press the left (-)side of the button to decrease the volume.Illuminated bars in the display show the relativevolume level.

*[AS21975(ALL)04/95] NOTE: If the volume level is set above acertain listening level when theignition switch is turned off, when theignition switch is turned back on, thevolume will come back to a “nominal”listening level. However, if the radiopower is turned off (with the“POWER” button), the volume willremain in the position it was set atwhen radio power is switched back on.

*[AS22100(ALL)04/95] Selecting the AM or FM frequency band

*[AS22225(ALL)02/95] Push the “AM/FM” button to select the desiredfrequency band. Pushing the button more thanonce will alternate between AM, FM1 and FM2.These functions are used with the stationmemory buttons described under How to tuneradio stations.

*[AS22300(ALL)05/95] How to tune radio stations (Stereo Radio)

*[AS22400(ALL)05/95] There are three ways for you to tune in to aparticular station. You can manually locate thestation by using the “TUNE” button, “SEEK” thestation or select the station by using the memorypreset buttons, which you can set to any desiredfrequency.


137

%*[AS22410(ALL)05/95] How to tune radio stations (Stereo CassetteRadio)

*[AS22420(ALL)02/95] There are four ways for you to tune in to aparticular station. You can manually locate thestation by using Automatic Music Search(“AMS”), “SEEK” the station, “SCAN” to thestation or select the station by using the memorybuttons, which you can set to any desiredfrequency.

*[AS22430(ALL)05/95] ❑Using the “TUNE” function

*[AS22440(ALL)05/95] You can change the frequency up or downone increment at a time by pressing andreleasing either the right (+) or left (-) side ofthe “TUNE” button. To change frequenciesquickly, press and hold down either the rightor left side of the “TUNE” button.

*[AS22450(ALL)04/95] Manual tuning adjusts your radio to anyallowable broadcast frequency, whether ornot a station is present on that frequency.(See All About Radio Frequencies in thissection.)

*[AS22730(ALL)05/95] ❑Using the “AMS” function to manually tuneyour radio (Stereo Cassette Radio)

*[AS22740(ALL)02/95] You can change the frequency up or downone increment at a time by first pressing the“AMS” button (display shows “TUNE”) thenwithin approximately five seconds pressingand releasing either the right (a) or left (b)side of the “SEEK” button. To changefrequencies quickly, press and hold downeither the right or left side of the “SEEK”button.


138

*[AS22800(ALL)04/95] ❑Using the “SEEK” function

*[AS22900(ALL)04/95] This feature on your radio allows you toautomatically select listenable stations up ordown the frequency band. Press the right(a) side of the “SEEK” button to select thenext listenable station up the frequency band.Press the left (b) side of the button to selectthe next listenable station down thefrequency band. By holding the button down,listenable stations can be passed over to reachthe desired station.

*[AS23160(ALL)02/95] ❑Using the “SCAN” function (Stereo CassetteRadio)

*[AS23170(ALL)07/94] Press the “SCAN” button to enter the scanmode. The radio will begin scanning up thefrequency band, stopping on each listenablestation for approximately a five-secondsampling. This continues until you press the“SCAN” button a second time. The displayflashes “AM” or “FM.”

*[AS23200(ALL)04/95] ❑Setting the Station Memory Preset buttons

*[AS23325(ALL)05/95] Your radio is equipped with 5 stationmemory buttons. These buttons can be usedto select up to 5 preset AM stations and 10preset FM stations (5 in FM1 and 5 in FM2).

*[AS23400(ALL)02/95] Follow the easy steps below to set these buttonsto the desired frequencies:

*[AS23500(ALL)04/95] 1. Select a band, then select a frequency.

*[AS23700(ALL)04/95] 2. Press one of the memory buttons and holdthe button until the sound returns. Thatstation is now held in memory on thatbutton.

*[AS23800(ALL)04/95] 3. Follow the two steps above for each stationmemory preset button you want to set.


139

*[AS23900(ALL)04/95] NOTE: If the vehicle’s battery is disconnected,the clock and station memory presetbuttons (if programmed in auto mode)will need to be reset.

*[AS24000(ALL)02/95] Adjusting the tone balance and speakeroutput of your radio

*[AS24100(ALL)04/95] ❑ Increasing or decreasing bass response

*[AS24225(ALL)05/95] Push the “AUDIO” button repeatedly untilthe display reads “BASS.” Push the right (+)side of the “VOLUME” button to increasebass (more “lows”), and push the left (-) sideto decrease bass (less “lows”).

*[AS24300(ALL)04/95] ❑ Increasing or decreasing treble response

*[AS24425(ALL)05/95] Push the “AUDIO” button repeatedly untilthe display reads “TREB.” Push the right (+)side of the “VOLUME” button to increase thetreble (more “highs”), and push the left (-)side to decrease treble (less “highs”).

*[AS24500(ALL)08/89] Speaker features and operation

*[AS24600(ALL)04/95] ❑Adjusting speaker balance

*[AS24725(ALL)05/95] Balance control allows you to adjust thesound distribution between the right and leftspeakers. Push the “AUDIO” buttonrepeatedly until the display reads “BAL.”Push the right (+) side of the “VOLUME”button to shift the sound to the rightspeakers, and push the left (-) side to shiftthe sound to the left speakers.


140

*[AS24800(ALL)04/95] ❑Adjusting speaker fader

*[AS24925(ALL)05/95] Fade control allows you to adjust the sounddistribution between the front and rearspeakers. Push the “AUDIO” buttonrepeatedly until the display reads “FADE.”Push the right (+) side of the “VOLUME”button to shift the sound to the frontspeakers, and push the left (-) side to shiftthe sound to the rear speakers.

*[AS24950(ALL)04/95] NOTE: Illuminated bars in the display showrelative levels of bass and treble andpositions of speaker balance and faderfunctions after adjustments are made,then revert to volume level set.

%*[AS25000(ALL)02/95] Using the Controls of Your Cassette TapePlayer

*[AS25500(ALL)02/95] How to insert a tape

*[AS25600(ALL)05/95] Insert a cassette (with the open edge to theright) firmly into the tape door opening, makingsure the cassette is completely in and “seated.”

[AS25650(ALL)07/93] NOTE: A cassette tape can be loaded with theignition on whether or not the radiopower is on. Inserting a cassette tapewith the radio power off will turn theaudio system on. After the cassette isejected, radio play will return.

*[AS25700(ALL)02/95] How to locate a desired track on the tape

*[AS25800(ALL)02/95] NOTE: The tape track number indicated in thedisplay does not necessarily correspondto the tape track or side number on thecassette label. It is used only toindicate when the tape mechanismreverses tracks.


141

*[AS25896(ALL)05/94] ❑Using the Automatic Music Search (“AMS”)function with cassette tape player

*[AS25897(ALL)03/95] Press and hold the “AMS” button (“AMS”will appear in the display). Then, push theleft (h) button to rewind to the beginningof the current selection or press the right(g) button to fast forward to the beginningof the next selection.

*[AS25900(ALL)02/95] ❑Fast forwarding the tape

*[AS26000(ALL)03/95] Push the right (g) button to fast forwardthe tape.

*[AS26100(ALL)02/95] ❑Rewinding the tape

*[AS26200(ALL)03/95] Push the left (h) button to rewind thetape.

*[AS26900(ALL)02/95] ❑How to change the side of the tape beingplayed

*[AS27000(ALL)03/95] The alternate track (other side) of the tapecan be selected at any time by pushing bothfast-wind buttons (h and g) at thesame time.

*[AS27100(ALL)02/95] How to eject the tape

*[AS27250(ALL)02/95] To stop the tape and eject the cassette, press the“EJECT” button. The radio will resume playing.

*[AS27300(ALL)02/95] Using the DolbyH B noise reduction feature

*[AS27400(ALL)02/95] NOTE: Noise reduction system manufacturedunder license from Dolby LabsLicensing Corporation. “Dolby” anddouble-D symbol are trademarks ofDolby Laboratories LicensingCorporation.

*[AS27550(ALL)05/95] Push station memory button 3 to activate DolbyHB Noise Reduction.


142

*[AS27600(ALL)02/95] Tips on Caring for the Cassette Player andTapes

*[AS27700(ALL)02/95] In order to keep your cassette tape playerperforming the way it was meant to, read andfollow these simple precautions:

*[AS27750(ALL)02/95] ❑Using a Ford Cassette Cleaning Cartridge toclean the tape player head after 10-12 hoursof play will help maintain the best playbacksound and proper tape operation.

*[AS27800(ALL)02/95] ❑Only cassettes that are 90 minutes long orless should be used. Tapes longer than 90minutes are thinner and subject to breakageor may jam the tape player mechanism.

*[AS27900(ALL)02/95] ❑Protect cassettes from exposure to directsunlight, high humidity and extreme heat orcold. If they are exposed to extremeconditions, allow them to reach a moderatetemperature before playing.

*[AS28001(ALL)02/95] ❑ If a tape is loose inside the cassette, tighten itbefore playing by putting your finger or apencil into one of the holes and turning thehub until the tape is tight.

*[AS28101(ALL)02/95] ❑Loose labels on cassette tapes can becomelodged in the mechanism. Remove any looselabel material before inserting a cassette.

*[AS28200(ALL)03/95] ❑Do not leave a tape in the cassette tapeplayer when not in use. High heat in thevehicle can cause the cassette to warp.


143

%*[AS28400(ALL)03/95] Clock Operation

*[AS28500(ALL)07/90] How to view the clock mode

*[AS28650(ALL)07/93] Press the “CLOCK” button to alternate thefrequency and time in the display. In the clockmode, pressing any radio function willautomatically display the radio frequency forapproximatedly ten seconds before changingback to the clock mode.

*[AS28800(ALL)07/90] How to set the clock

*[AS28900(ALL)04/92] 1. Turn the radio on.

*[AS29025(ALL)03/95] 2. Press and hold in the “CLOCK” button,press the “SEEK” button left (b) to advancethe hours and right (a) to advance theminutes.

*[AS29200(ALL)07/90] NOTE: The clock displays 12-hour time withno AM/PM indications.

*[AS35200(ALL)06/95] Common Radio Reception Conditions

*[AS35300(ALL)02/95] Several conditions prevent FM reception frombeing completely clear and noise-free, such asthe following:

*[AS35400(ALL)04/95] 1. Distance/Strength

*[AS35500(ALL)02/95] The strength of the FM signal is directly relatedto the distance the signal must travel. Thelistenable range of an average FM signal isapproximately 25 miles (40 kilometers). Beyondthis distance, the radio is operating in a fringearea and the signal becomes weaker.


144

*[AS35550(ALL)06/90] NOTE: Always make sure your antenna(whether you have a power antenna ora manually adjustable antenna) is fullyextended to the maximum length forproper reception. If your antenna is notfully extended, you may experiencesignal loss while traveling in fringereception areas.

*[AS35600(ALL)04/95] 2. Terrain

*[AS35700(ALL)02/95] The terrain (hilly, mountainous, tall buildings) ofthe area over which the signal travels mayprevent the FM signal from being noise-free.

*[AS35800(ALL)11/92] Repeated pops and hisses which are heardduring an otherwise clear broadcast can occurnear the station because of the “line of sight”characteristic of FM radio waves.

*[AS35900(ALL)01/95] If there is a building or large structure betweenthe antenna and station, some of the signal“bends” around the building, but certain spotsreceive almost no signal. Moving out of the“shadow” of the structure will allow the stationto return to normal.

*[AS36000(ALL)01/95] When the radio waves are reflected off objects orstructures, the reflected signal cancels the normalsignal, causing the antenna to pick up noise anddistortion. Cancellation effects are mostprominent in metropolitan areas, but also canbecome quite severe in hilly terrain anddepressed roadways.

*[AS36100(ALL)01/95] To minimize these conditions, a stereo/monoblend circuit has been incorporated into thissystem. This feature automatically switches aweak stereo signal to a clearer monaural signal,which improves the quality of reception.


145

*[AS36200(ALL)01/95] Several sources of static are normal conditionson AM frequencies. These can be caused bypower lines, electric fences, traffic lights andthunderstorms.

*[AS36300(ALL)01/95] Another reception phenomenon is Strong SignalCapture and Overload. This can occur whenlistening to a weak station and when passinganother broadcast tower. The close station maycapture the more distant station, although thedisplayed frequency does not change. Whilepassing the tower, the station may switch backand forth a few times before returning to theoriginal station.

*[AS36400(ALL)01/95] When several broadcast towers are present(common in metropolitan areas) several stationsmay overload the receiver, resulting inconsiderable station changing, mixing anddistortion.

*[AS36500(ALL)01/95] Automatic gain control circuitry for both AMand FM bands has been incorporated into thissystem to reduce strong signal capture andoverload.

%*[AS36600(ALL)08/89] All About Radio Frequencies

*[AS36700(ALL)06/95] The Federal Communications Commission (FCC)and the Canadian Radio TelecommunicationsCommission (CRTC) establish the frequenciesAM and FM radio stations may use for theirbroadcasts. The allowable frequencies are, AM:530, 540...1600, 1610 kHz in 10 kHz steps; FM:87.9, 88.1...107.7, 107.9 MHz in 0.2 MHz steps.

*[AS36800(ALL)06/95] Not all frequencies will be assigned to a givenarea. This radio will tune to each of thesefrequencies using manual tune and no finetuning is necessary as radio stations may not useother frequencies.


146

*[AS36900(ALL)02/95] Some FM radio stations advertise a“rounded-off” frequency which is not thefrequency they actually broadcast on. Forexample, a radio station that is assigned afrequency of 98.7 MHz may call itself “Radio 99”even though 99.0 MHz is not an allowable FMbroadcast frequency.

*[AS37000(ALL)01/95] Important Warranty and ServiceInformation

*[AS37050(ALL)07/90] ❑Warranty

*[AS37100(ALL)03/95] Your sound system is warranted for three yearsor 36,000 miles (60,000 kilometers), whichevercomes first. Consult your vehicle warrantybooklet for further information. Ask your dealerfor a copy of this limited warranty.

*[AS37150(ALL)07/90] ❑Service

*[AS37200(ALL)01/95] At Ford Electronics, we stand behind our audiosystems with a comprehensive service and repairprogram. If anything should go wrong withyour Ford audio system, return to your dealerfor service. There is a nationwide network ofqualified Ford authorized repair centers to assistyou.


147

Driving Your Probe

*[DR00400(ALL)09/93] Procedures for driving your vehicle will varydepending on which type of transaxle yourvehicle has. You may be familiar with the term“transmission.” We use transaxle because it is amore accurate term for vehicles that havefront-wheel drive.

[DR00500(ALL)03/94] Your vehicle has one of two types of transaxles:

[DR00600(ALL)01/92] ❑a manual five-speed overdrive

[DR00700(ALL)02/89] ❑an automatic four-speed overdrive

*[DR01600(ALL)01/95] Driving with an AutomaticOverdrive Transaxle

*[DR01800(ALL)01/95] Putting Your Vehicle in Gear

[DR01900(ALL)03/94] The automatic transaxle on your vehicle is anelectrically controlled four speed. The highestgear is Overdrive. The Overdrive position isreflected by D in the shift selector indicator.

[DR02000(ALL)04/93] The automatic transaxle uses the conventionalselector lever, and an Overdrive OFF button. Allnormal driving is done with the selector in theD position.

File:prdrp.exUpdate:Fri Jun 23 19:35:02 1995

148

[DR02205(ALL)06/93]


Automatic shift lever

*[DR02400(ALL)03/94] Your automatic transaxle vehicle has aconsole-mounted shift selector lever. You muststep on the brake pedal, start the engine, andthen push in the thumb button to move the shiftselector lever to the position you choose.

*[DR02500(ALL)05/95] RWARNING

Hold the brake pedal down while youmove the gearshift lever from position toposition. If you do not hold the brakepedal down, your vehicle may moveunexpectedly and injure someone.


149

[DR02550(ALL)03/94] NOTE: If the shift selector lever will not movewith the key on and the brake pedaldepressed refer to Shift lock system inthe Index.

*[DR02600(ALL)11/94] Once the gearshift is secure in the desiredposition, release the brake pedal and use theaccelerator as necessary.

%*[DR02900(ALL)06/92] Backing Up

*[DR03000(ALL)02/95] With the gearshift in the R (Reverse) position,the vehicle will move backward. You shouldalways come to a complete stop before shiftinginto or out of R (Reverse).

*[DR03100(ALL)01/95] Driving

[DR03200(ALL)05/93] When to use Overdrive (D with Overdriveactivated)

[DR03300(ALL)01/94] Overdrive is the usual driving position for anautomatic overdrive transaxle. It works the sameway Drive (Overdrive OFF) works, automaticallyupshifting or downshifting as the vehicle speedsor slows.

[DR03400(ALL)01/94] However, Overdrive also shifts into a fourthgear — an overdrive gear — when your vehiclecruises at a consistent speed for any length oftime. This fourth gear will increase your fueleconomy when you travel at cruising speeds.

[DR03500(ALL)05/95] Overdrive may not be appropriate for certainterrain. If the transaxle shifts back and forthbetween third and fourth gears while you aredriving on hilly roads, select Drive (OverdriveOFF) by cancelling Overdrive as outlined below.


150

[DR03620(ALL)01/92] Cancelling Overdrive

[DR03625(ALL)06/93] The Overdrive Off (O/D OFF) button is locatedon the gearshift. The Overdrive Off (O/D OFF)light is located in the instrument cluster.

[DR03630(ALL)05/95] The O/D OFF light is not illuminated duringnormal vehicle operation. This allows thetransaxle to upshift and downshift from 1stthrough 4th gears. When the O/D OFF button ispressed, Overdrive is cancelled and the O/DOFF light in the instrument cluster illuminates.When the O/D OFF light is illuminated, thetransaxle will upshift and downshift from 1stthrough 3rd gears.

[DR03660(ALL)01/92]


Overdrive OFF indicator light

[DR03665(ALL)06/93] To return the transaxle to normal operation (1stthrough 4th gears) press the O/D OFF buttonagain. The O/D OFF button may be used tocancel Overdrive any time the vehicle is beingdriven. Each time your vehicle is started, theOverdrive system will automatically be in thenormal “overdrive on” mode and the light willnot be illuminated.

[DR03670(ALL)06/93] If the light does not come on when the O/DOFF button is pressed, or if the light flasheswhen you are driving, have your vehicleserviced at the first opportunity. If thiscondition persists, damage could occur to thetransaxle.


151

[DR03700(ALL)05/93] When to use Drive (D with Overdrive OFF)

[DR03800(ALL)05/95] In Drive (Overdrive OFF), your vehicleautomatically upshifts or downshifts from 1stthrough 4th gears as the vehicle speeds up orslows down. It also downshifts when you needextra acceleration to pass or when driving up ahill.

[DR03900(ALL)01/94] Selecting Drive (Overdrive OFF) will eliminatethe transaxle’s tendency to “hunt” between thirdand fourth gears while driving over hilly terrain.It also gives your vehicle more engine braking toslow your vehicle than Overdrive does.

*[DR03925(ALL)01/93] When to use Second (2)

[DR03935(ALL)01/94] Use Second (2) to help drive up moderatelysteep hills or when starting on slick surfaces. Itprevents the transaxle from frequently shiftingup and down. It also gives more engine brakingthan Overdrive or Drive when going down hills.

[DR03940(ALL)06/93] Do not go faster than 64 mph (102 km/h) withthe gearshift in the Second (2) position. If youshift from Overdrive or Drive to Second becauseof hilly terrain, your transaxle will automaticallydownshift in the proper sequence.

*[DR04005(ALL)12/93] When to use First (1)

[DR04100(ALL)01/94] When your vehicle is in First (1), it gives moreengine braking to slow your car than Drive (Dwith Overdrive OFF) on downgrades.

[DR04200(ALL)05/95] Do not go faster than 32 mph (50 km/h) in thisgear. You can upshift from First (1) into DPosition at any speed. If you shift fromOverdrive or Drive to First (1) because of hillyterrain, your transaxle will automaticallydownshift in the proper sequence.


152

[DR04280(ALL)11/91] Reverse

[DR04315(ALL)01/92] In the Reverse (R) position, the vehicle movesonly backward. Your vehicle must be stoppedbefore shifting into Reverse (R).

[DR04330(ALL)11/91] Neutral

[DR04360(ALL)01/92] In Neutral (N), the wheels of the transaxle arenot locked. Your vehicle will roll freely, even onthe slightest incline, unless the parking brake orbrakes are on.

*[DR04500(ALL)06/92] Parking

[DR04600(ALL)03/94] Always come to a complete stop before you shiftinto P (Park). Make sure that the shift selectorlever is securely latched in P (Park). This locksthe transaxle and prevents the front wheels fromrotating.


Always set the parking brake fully andmake sure that the gearshift is securelylatched in P (Park).


Never leave your vehicle unattendedwhile it is running.

*[DR05000(ALL)02/91] You can tell the gearshift is securely latchedwhen the thumb button has popped out. In thisposition the gearshift selector lever cannot bemoved unless the button is pushed in.


153


Hold the brake pedal down while youmove the gearshift lever from position toposition. If you do not hold the brakepedal down, your vehicle may moveunexpectedly and injure someone.

*[DR05100(ALL)01/89] Driving with a Manual Transaxle

*[DR05200(ALL)03/95] Using the Clutch

*[DR05300(ALL)05/95] After the engine starts, allow it to idle for a fewseconds. Then, hold your right foot on the brakepedal, push the clutch pedal to the floor withyour left foot, and move the shift selector leverinto 1 (First) or R (Reverse).

*[DR05400(ALL)01/94] To move the vehicle, lift your right foot off thebrake pedal and slowly release the clutch pedal.(You need to press down slowly on theaccelerator at the same time you release theclutch pedal.)

*[DR05500(ALL)03/95] Do not drive with your foot resting on theclutch pedal and do not use the clutch to holdyour vehicle at a standstill while waiting on ahill. These actions will seriously reduce clutchlife.

*[DR05600(ALL)03/95] Driving with your foot resting on the clutch maycause the vehicle to jerk sharply when pressingor removing your other foot from theaccelerator.


154

*[DR05700(ALL)03/95] Shifting the Gears

*[DR05800(ALL)11/94] The gearshift for a manual transaxle is mountedon the floor. The gearshift can be in one ofseven possible positions, as shown.

[DR05900(ALL)05/95]


Shift pattern

*[DR06100(ALL)02/91] Always push the clutch pedal all the way inwhen you shift. You should upshift according tothe speeds given in the chart later in thischapter.

[DR06140(ALL)11/90] Sometimes, you will upshift at higher speeds.For example, you may want to stay in a lowergear to gain more power for passing or forclimbing a hill. However, you must stay withinthe range when you upshift or downshift.


155

%*[DR06200(ALL)03/95] Backing up

*[DR06300(ALL)03/95] To shift into R (Reverse):

*[DR06400(ALL)05/95] 1. Bring your vehicle to a complete stop.

*[DR06500(ALL)03/90] 2. Push the clutch pedal in all the way to thefloor and hold it. If you do not hold theclutch pedal in all the way, you may hear agrinding noise when you shift.

*[DR06600(ALL)08/94] 3. Put the gearshift in Neutral and wait at least3 seconds before shifting into R (Reverse) toprevent a grinding noise. Do not release theclutch.

*[DR06700(ALL)02/92] 4. Then push the gearshift all the way to theright and pull it down into R (Reverse).

*[DR06800(ALL)03/95] When in 5 (Fifth) gear, you can engage R(Reverse) only by moving the gearshift toNeutral before you shift into R (Reverse).This is a special lockout feature that protectsyou from accidentally shifting into R(Reverse) when you downshift from 5 (Fifth)gear.

*[DR06900(ALL)02/92] 5. Once R (Reverse) is engaged, slowly releasethe clutch pedal from the floor.

*[DR07000(ALL)03/94] If R (Reverse) is not engaged, continue to pushthe clutch pedal in while you put the gearshiftback into Neutral. Then, release the clutch pedalfor a moment and repeat steps 2 through 5.


156

*[DR07100(ALL)05/95] Upshifting

*[DR07250(ALL)06/93] For normal acceleration, you should upshift atthe following speeds:

[DR07600(ALL)01/92]

eight pica chart:0032089-A

[DR07620(ALL)11/91] For cruising, you should upshift at the followingspeeds.

[DR07650(ALL)01/92]

eight pica chart:0032090-A

%*[DR08000(ALL)05/95] Downshifting

*[DR08100(ALL)03/95] When you slow down or climb a steep hill,always downshift before the engine starts to losepower. Downshifting reduces the chance ofstalling and gives your vehicle better accelerationto increase speed again.

*[DR08500(ALL)03/95] When you drive down steep hills, downshiftinghelps you keep a safe speed and helps preventunnecessary wear on the brakes.

*[DR08600(ALL)03/95] When you come to a stop, do not downshiftthrough each gear. Disengage the clutch and usethe brake as necessary. Downshifting throughthe gears decreases your vehicle’s fuel economy.


157

*[DR08800(ALL)03/95] Parking

*[DR08900(ALL)03/95] To park your vehicle, shift into 1 (First), set theparking brake fully, and turn off the ignition.


Do not park your vehicle in Neutral, itmay move unexpectedly and injuresomeone. Use 1 (First) gear and set theparking brake fully.

*[DR09100(ALL)01/95] Steering Your Vehicle[DR09200(ALL)01/94] Your vehicle is equipped with power steering.

Power steering uses energy from the engine tohelp steer your vehicle.

%*[DR09250(ALL)04/95] If the amount of effort needed to steer yourvehicle changes at a constant vehicle speed, havethe power steering system checked. If the powersteering system breaks down (or if the engine isturned off), you can steer the vehicle manuallybut it takes more effort.

*[DR09300(ALL)01/95] Never hold the steering wheel to the extremeright or left for more than five seconds if theengine is running. This can damage the powersteering pump.

*[DR09500(ALL)03/95] Brakes%*[DR09600(ALL)01/95] Applying the Brakes

*[DR09700(ALL)05/95] Your vehicle may have four-wheel poweranti-lock disc brakes which adjust automaticallythrough everyday use.

*[DR09750(ALL)05/95] Some models have power front disc brakes andrear drum brakes which automatically adjust asthe brake pads and linings wear down.


158

*[DR10100(ALL)05/95] If your vehicle does not have anti-lock brakes,apply the brake pedal gradually. Use the“squeeze” technique — push on the brake pedalwith a steadily increasing force. This allows thewheels to continue to roll while you are slowingdown, which lets you steer properly.

*[DR10200(ALL)05/95] If your vehicle does not have anti-lock brakes,extreme braking can make the wheels lock andslide, causing you to lose control of the steering.If the wheels lock, release the brake pedal andrepeat the “squeeze” technique.

*[DR10300(ALL)05/95] Do not drive with your foot resting on the brakepedal; you will wear out the linings and increaseyour vehicle’s stopping distance. Brake rotordamage may also eventually occur.

*[DR10400(ALL)05/95] NOTE: If you are driving down a long orsteep hill, shift to a lower gear and donot apply your brakes continuously. Ifyou apply your brakes continuously,they may overheat and become lesseffective.

*[DR10500(ALL)03/95] Occasional brake squeal during light to moderatestops does not affect the function of the brakesystem and is normal. However, if the squealbecomes louder or more frequent, have yourbrakes inspected by your dealer or a qualifiedservice technician.

[DR10510(ALL)05/95] Anti-lock Brake System (If equipped)

*[DR10520(ALL)05/95] If your vehicle is equipped with the anti-lockbrake system (ABS), the wheels will not lock andslide when you press down hard on the brakepedal. The ABS automatically starts releasingand reapplying the front brakes independentlyand the rear brakes together whenever yourvehicle’s wheels start to lock. When thishappens, you will feel the brake pedal pulsate.This is an indication that the ABS is workingcorrectly and is normal.


159

*[DR10530(ALL)05/95] If the brake pedal is applied while the vehicle isdriven over uneven road surfaces, the ABS maycycle and the driver may sense a pulsation inthe brake pedal, accompanied by a slight up anddown movement of the pedal height and aclicking sound. This may also happen whendriving on an inclined surface such as adriveway while making a sharp turn. This is anormal condition.

*[DR10540(ALL)05/95] Each time you turn the ignition key to the ONposition, the ABS will function through one testcycle. When this happens, the ABS light willcome on for up to five seconds. If the light stayson longer than five seconds, shut off the engineand restart. If it remains on, it means the ABS isdisabled and should be serviced immediately torestore the benefits of the anti-lock feature.Normal braking is not affected unless the redBRAKE system warning light is also lit.

*[DR10550(ALL)05/95] ABS has self-check capabilities. As describedabove, the system turns on the ABS light eachtime you start your engine. After the engine isstarted and the ABS light turns off, the systemperforms another test the first time the vehiclereaches 4-9 mph (6-15 km/h). The system turnson the ABS pump motor for approximately 1/2second. At this time, a mechanical noise may beheard. This is a normal part of the self-checkfeature. If a malfunction is found during thischeck the ABS light will come on.

[DR10560(ALL)05/95] Ford Motor Company has not found anydetrimental effects of popular mobile roadtransmitting equipment installed on vehiclesequipped with the Anti-lock Brake System ifnormal radio installation practices are rigidlyfollowed. However, if after installing mobileradio transmitting equipment, the Anti-lockBrake System light comes on at any time otherthan immediately after turning the key to the


160

ON position, or during a sudden stop, haveyour mobile radio dealer inspect the radioinstallation. Proper radio installation proceduresto be followed are published by the radiomanufacturer.

*[DR10600(ALL)03/95] Parking Brake

*[DR10700(ALL)01/95] The parking brake should be used wheneveryou park your vehicle.

*[DR10800(ALL)11/91] If the service brakes don’t operate while thevehicle is in motion, you can make anemergency stop with the parking brake,however, the stopping distance will be muchgreater than normal.

*[DR10900(ALL)11/93] The parking brake lever is located between thefront seats. To set the parking brake, put yourfoot on the brake pedal while pulling theparking brake handle fully and firmly upward.

[DR11000(ALL)03/94]


Parking brake (handbrake)


161


To prevent personal injury, do not releasethe parking brake while outside thevehicle.


Always set the parking brake fully andmake sure that the gearshift is securelylatched in P (Park) (automatic transaxle) orin 1 (First) (manual transaxle).

*[DR11400(ALL)03/95] Always check the Brake Warning Light eachtime you start your engine. Driving with theparking brake on will cause the brakes to wearout quickly and will reduce the fuel economy.


If the parking brake is fully released, butthe Brake System light remains on, havethe brakes checked immediately. Theymay not be working properly.

*[DR11600(ALL)01/95] The parking brake is not designed to stop amoving vehicle, but you can use the parkingbrake to stop your vehicle in an emergency ifthe normal brakes fail. However, since theparking brake applies only the rear brakes, thestopping distance will increase greatly and thehandling of your vehicle will be adverselyaffected.


162

%*[DR14000(ALL)01/95] Driving Under Special Conditions

*[DR14100(ALL)01/95] Tips for Safe Driving

*[DR14200(ALL)05/95] As with any new vehicle, yours may drive andhandle differently from your previous vehicle.Use particular care until you become accustomedto its various features and driving characteristics.

*[DR14300(ALL)03/95] Operate your vehicle within reasonable limits.Sudden acceleration, deceleration, turning, orcombinations of these maneuvers can cause avehicle to behave differently than anticipated.

%*[DR14700(ALL)01/95] Driving in Bad Weather

%*[DR14800(ALL)01/95] Slippery roads

[DR14900(ALL)03/95] On some slippery road surfaces, your vehicle’sfront-wheel drive may provide betteracceleration than a vehicle with rear-wheel drive.However, this does not mean that your vehiclecan stop any faster or any better than a vehiclewith rear-wheel drive. Exercise the same cautionwhile driving on slippery roads with yourfront-wheel drive vehicle as you would with arear-wheel drive vehicle.

*[DR15100(ALL)03/95] ❑Do not quickly move the steering wheelunless necessary.

*[DR15200(ALL)01/95] ❑Drive slower than you normally would.

*[DR15400(ALL)01/95] ❑Give your vehicle more distance to stop.

[DR15500(ALL)05/95] ❑Pump the brake pedal steadily and evenly toavoid locking your wheels. NOTE: Do notpump your brakes if your vehicle is equippedwith the anti-lock brake system feature.

*[DR15600(ALL)02/93] ❑Consider using one of the lower gears.


163


To avoid losing control on slippery roads,do not downshift into 1 (First) with theautomatic transaxle when moving fasterthan 20 mph (32 km/h). Do not downshiftinto 1 (First) with the manual transaxlewhen moving faster than 10 mph(16 km/h).


If your vehicle has speed control, do notuse it on slippery roads. You could losecontrol of your vehicle and could injuresomeone.

*[DR15800(ALL)01/95] If you have an automatic transaxle and yourvehicle gets stuck (for example, in mud orsnow), you may try to “rock” it out of the spot.Shift, in a steady rhythm, between forward andreverse gears. While in each gear, press lightlyon the accelerator and release.


Do not spin the wheels at over 35 mph(55 km/h). The tires may fail and injure apassenger or bystander.

*[DR16000(ALL)03/95] By moving the vehicle backward and forward,you may gain enough momentum to move outof the spot. If you are still stuck after a minuteor two of rocking, call for a tow truck.

[DR16100(ALL)03/95] Do not rock the vehicle for more than a fewminutes. This may overheat the engine, damagethe transaxle, or damage the tires.


164

%*[DR16200(ALL)01/95] High water

*[DR16300(ALL)01/95] Do not drive through flooded areas unless youare sure that the water is below the bottom ofthe wheel rims.

*[DR16400(ALL)04/94] If you must drive through high water, driveslowly. You may have limited traction or wetbrakes, so allow extra stopping distance becauseyour vehicle will not stop as quickly as usual.

*[DR16500(ALL)01/95] After you drive through the standing water,apply your brakes gently several times as yourvehicle moves slowly. This helps to dry thebrakes.

*[DR16600(ALL)03/95] Driving With a Heavy Load

[DR16700(ALL)05/95] There are limits to the amount of weight yourvehicle can carry. The total weight of yourvehicle, plus the weight of the passengers andcargo, should never be more than the GrossVehicle Weight Rating (GVWR). Also, the weightthat your vehicle carries over each axle shouldnever be more than the Gross Axle WeightRating (GAWR) for the respective axle.

*[DR16800(ALL)07/93] You can find your vehicle’s GVWR and GAWRon the Safety Compliance Certification Label onthe left door lock pillar.

*[DR16900(ALL)01/95] The weight limits of your vehicle’s tires affectthe GVWR or GAWR limitations. Usage ofreplacement tires with higher weight limit thanoriginals does not increase GVWR or GAWR.Usage of lower capacity replacement tires maylower GVWR and GAWR limitations.


165


If the GVWR or the GAWR specified onthe Safety Compliance Certification Labelis exceeded, your vehicle may be damagedor you may lose control and injuresomeone.

%*[DR18250(ALL)01/95] Limiting Your Vehicle’s Load

[DR18300(ALL)05/95] The load you add to your vehicle must notexceed the maximum load stated on the tireinformation decal.

*[DR18400(ALL)01/95] To figure the weight of your vehicle’s load, addthe weights of:

*[DR18500(ALL)01/95] ❑ the driver and passengers

*[DR18600(ALL)01/95] ❑ luggage and any other items that you put inyour vehicle

*[DR18800(ALL)01/95] ❑ the weight of any equipment that has beenadded to your vehicle since it was deliveredto your dealer

*[DR18900(ALL)01/95] If you do not know the actual weights of theseitems, use the following procedure to figure theweight of a load:

*[DR19000(ALL)01/95] 1. Weigh your vehicle without the driver,passengers and luggage. You might takeyour vehicle to a shipping company or aninspection station for trucks.

*[DR19100(ALL)01/95] 2. Then weigh your vehicle with the driver,passengers and luggage.

*[DR19200(ALL)01/95] 3. Subtract the first reading from the second tofigure the total weight of the load.


166

*[DR19300(ALL)01/95] After determining this load, you must also makesure that the total weight of your vehicle, plusthe load it carries, is less than its GVWR. Also,make sure that the weight your vehicle carriesover each axle is less than the GAWR for therespective axle.

*[DR19500(ALL)01/95] If your vehicle exceeds the GVWR, remove cargofrom your vehicle accordingly. If your vehicleexceeds the GAWR for either axle, shift the loador remove cargo accordingly.


Improper distribution of your vehicle’sload or carrying weight in excess of theamount shown on the tire decal can causerapid tire wear or loss of vehicle control.

*[DR20000(ALL)04/95] Towing a Trailer

[DR21000(ALL)01/95] Do not use your vehicle for towing a trailer.

*[DR22320(ALL)03/91] Towing Behind Another Vehicle —Recreational Vehicle

*[DR22350(ALL)02/92] Towing an automatic transaxle (ATX) equippedvehicle behind another vehicle, such as aRecreational Vehicle (RV), is not recommendedunless a front wheel dolly or trailer is used. Donot tow your ATX equipped vehicle with thefront wheels on the ground or transaxle damagemay occur.


167

*[DR22355(ALL)09/93] Towing a manual transaxle (MTX) equippedvehicle behind another vehicle, such as aRecreational Vehicle (RV), is allowed only if it istowed forward. The parking brake must bereleased, the gearshift must be in Neutral, theignition key must be in the ACC position, thebattery must be disconnected to eliminate batterydrain, and the steering wheel unlocked. Youmay tow your MTX equipped vehicle only in aforward direction with the front wheels on theground without damage to the transaxle.

*[DR22358(ALL)02/92] Do not tow your manual transaxle equippedvehicle at a speed faster than 55 mph(88 km/h). The maximum towing distance isunlimited.


Never use a tow bar that attaches to thebumper when you tow your vehicle. Thiscould damage the bumper and cause anaccident.


169

Roadside Emergencies

*[RE00400(ALL)03/95] Jump-Starting Your Vehicle[RE00650(ALL)05/91] Your vehicle has a Motorcraft maintenance-free

battery. Your vehicle’s battery may die if youleave the lights on or any electrical equipmenton after you turn the engine off. If this happens,you may be able to jump-start from a boosterbattery to start your vehicle.

*[RE00700(ALL)02/95] RWARNING

The gases around the battery can explodeif exposed to flames, sparks, or litcigarettes. An explosion could result ininjury or vehicle damage.


To protect yourself when charging abattery, always shield your face and eyes.Make sure that you can breathe fresh air.

%*[RE00900(ALL)05/95] RWARNING

Applying too much pressure on the endswhen lifting a battery could cause acid tospill. Lift the battery with a carrier orwith your hands on the opposite corners.

%*[RE01000(ALL)05/95] RWARNING

Batteries contain sulfuric acid which burnsskin, eyes, and clothing.

File:prrep.exUpdate:Fri Jun 23 19:34:36 1995

170

*[RE01010(ALL)06/95] If the acid touches someone’s skin, eyes, orclothing, immediately flush the area with waterfor at least 15 minutes. If someone swallows theacid, have him or her drink lots of milk or waterfirst, then Milk of Magnesia, a beaten egg, orvegetable oil. Call a doctor immediately.


Do not push-start your vehicle. You coulddamage the catalytic converter. For furtherinformation, see Jumper Cables in theIndex.

*[RE01200(ALL)03/95] To avoid damaging your vehicle or your battery,and to avoid injury to yourself, follow thesedirections for preparing your vehicle tojump-start and connecting the jumper cables inthe order they are given. If in doubt, call forroad service.

*[RE01300(ALL)03/95] Preparing Your Vehicle

*[RE01400(ALL)03/95] 1. Your vehicle has a 12-volt starting system, soyou need to use a 12-volt jumper system.You will damage your starting motor,ignition system, and other electrical parts ifyou connect them to a 24-volt power supply(either two 12-volt batteries in series or a24-volt generator set).

*[RE01500(ALL)03/95] 2. Do not disconnect the battery of the disabledvehicle. You could damage the vehicle’selectrical system.

*[RE01600(ALL)04/95] 3. Park the booster vehicle close to the hood ofthe disabled vehicle. Make sure the vehiclesdo not touch each other. Set the parkingbrake on both vehicles and stay clear of theengine cooling fan and other moving parts.


171

*[RE01700(ALL)03/95] 4. Check all battery terminals and remove anyexcessive corrosion before you attach thejumper cables.

*[RE01800(ALL)03/95] 5. Turn on the heater fan in both vehicles.Press the DEFROST button. Turn off allother switches and gauges.

%*[RE01900(ALL)05/95] Connecting the jumper cables

*[RE02000(ALL)03/95] 1. Connect one end of the first jumper cable tothe positive (+) terminal of the dischargedbattery. (You can connect either jumper cableto the positive (+) terminal, as long as youuse the same cable for both positiveterminals.) Most jumper cables have a redcable and a black cable. The red cable isgenerally used for the positive terminals andthe black for the negative ones.

*[RE02100(ALL)04/95] 2. Connect the other end of the first cable tothe positive (+) terminal of the boosterbattery.

*[RE02200(ALL)05/95] 3. Connect one end of the second cable to thenegative (-) terminal of the booster battery— NOT to the discharged battery.

*[RE02300(ALL)04/95] 4. Connect the other end of the second cable toa good metallic surface on the engine orframe of the disabled vehicle.


Do not connect the end of the secondcable to the negative (-) terminal of thebattery to be jumped. A spark may causean explosion of the gases that surroundthe battery.


172

[RE02500(ALL)02/92]

two third page art:0030135-C

The sequence for connecting the jumper cables

*[RE02800(ALL)03/95] Jump-Starting

*[RE02900(ALL)03/95] 1. Make sure that the jumper cables are not inthe way of moving engine parts, then startthe booster vehicle. Run the engine at amoderate speed.

*[RE03000(ALL)03/95] 2. Let the discharged battery charge for a fewminutes and then start the disabled vehicle.It may take a couple of tries before thevehicle starts. If the vehicle does not startafter several attempts, there may be adifferent problem.


173

*[RE03100(ALL)03/95] 3. When both vehicles are running, let themidle for a few minutes to charge thedischarged battery.

*[RE03200(ALL)03/95] Removing jumper cables

[RE03300(ALL)01/95] 1. Always remove the jumper cables inreverse order. Remove the negative (-) endof the jumper cable from the metallic surfaceon the engine or frame of the disabledvehicle.

*[RE03400(ALL)05/95] 2. Remove the negative (-) cable from thebooster battery.

*[RE03500(ALL)03/95] 3. Remove the positive (+) cable from thebooster battery.

*[RE03600(ALL)05/95] 4. Remove the other end of the positive (+)cable from the discharged battery.

*[RE03700(ALL)04/95] After the vehicle is started, let it idle for a whileto let the engine “relearn” its idle conditions.Drive it around for a while with all electricalaccessories turned off to let the battery recharge.You may need to use a battery charger to fullyrecharge the battery.

*[RE03750(ALL)03/95] If you need to replace your battery, see Batteryin the Servicing Your Vehicle chapter.

*[RE03800(ALL)03/95] Changing a Tire

*[RE03900(ALL)01/95] If you get a flat tire while you are driving, donot apply the brake heavily. Instead, graduallydecrease the speed. Hold the steering wheelfirmly and slowly move to a safe place on theside of the road. Park on a level spot, turn offthe ignition, set the parking brake, and turn onthe hazard flashers.


174

*[RE04000(ALL)03/95] The Temporary Spare Tire

*[RE04100(ALL)03/95] You may have a high pressure temporary sparetire. This spare tire is smaller than a regular tireand is designed for emergency use only. Use itonly when you get a flat tire and replace it assoon as you can. This spare tire is marked withthe words “TEMPORARY USE ONLY” so thatyou can easily identify it.


If you use the temporary spare tirecontinuously or do not follow theseprecautions, the tire could fail, causingyou to lose control of the vehicle, possiblyinjuring yourself or others.

*[RE04300(ALL)01/95] When you drive with the temporary spare tire,DO NOT:

*[RE04400(ALL)01/95] ❑exceed 50 mph (80 km/h) under anycircumstances.

*[RE04500(ALL)01/95] ❑ load your vehicle so that it is heavier thanthe maximum vehicle load rating listed onthe tire decal.

*[RE04700(ALL)01/95] ❑use tire chains on this tire.

*[RE04800(ALL)01/95] ❑ try to repair the temporary spare tire orremove it from its wheel.

*[RE04900(ALL)01/95] ❑use the wheel for any other type of vehicle.

*[RE05000(ALL)01/95] ❑drive through an automatic car wash withthis tire. Because the temporary spare tire issmaller than a conventional tire, it reducesthe ground clearance. Your vehicle may getcaught in the rails and it could be damaged.


175

*[RE05100(ALL)03/95] Spare Tire Location

[RE05200(ALL)08/91] The temporary spare tire is stored in the luggagecompartment, under the mat and floorboard.

[RE05300(ALL)01/92]


Location of the temporary spare tire and jacking equipment

[RE05650(ALL)01/92] To remove the jack and the temporary spare,turn the bolt counterclockwise.

*[RE07600(ALL)03/95] Preparing to Change the Tire

*[RE07700(ALL)02/92] 1. Make sure that your vehicle will not moveor roll. If you have an automatic transaxle,put the gearshift in P (Park). If you have amanual transaxle, put the gearshift in 1(First). Set the parking brake and block thewheel that is diagonally opposite the tirethat you are changing.


176

[RE07800(ALL)02/89]


Blocking the wheel diagonally opposite the tire beingchanged

[RE08090(ALL)05/95] When one of the front wheels is off the ground,the transaxle alone will not prevent the vehiclefrom moving or slipping off the jack, even if thevehicle is in P (Park) or 1 (First). To prevent thevehicle from moving when you change one ofthe front tires, put a block behind the wheel thatis diagonally opposite to the tire.


If the vehicle slips off the jack, you orsomeone else could be seriously injured.

*[RE08200(ALL)05/95] 2. Get out the spare tire and jack.[RE08300(ALL)03/94] 3. Remove any wheelcovers or hubcaps with

the tapered end of a wheel nut wrench.Insert the handle of the wrench and twist itagainst the inner wheelcover flange. Removeany chrome nuts or plastic caps covering thewheel lug nuts.


177

[RE08500(ALL)01/92] 4. Loosen the wheel lug nuts by pulling up onthe handle of the wrench one half-turncounterclockwise. Do not remove the wheellug nuts until you raise the tire off theground. For information about removinganti-theft lug nuts, see Removing andReplacing the Anti-Theft Wheel Lug Nuts inthis section.

*[RE08600(ALL)05/95] Removing and Replacing the Tire

%*[RE08700(ALL)11/94] 1. Find the jack notch next to the door of thetire that you are changing. Put the jack inthe jack notch and turn the handle of thejack clockwise until the wheel is completelyoff the ground.


To lessen the risk of personal injury, donot put any part of your body under thevehicle while changing a tire. Do not startthe engine when your vehicle is on thejack. The jack is only meant for changingthe tire.


178

[RE09000(ALL)05/95]


Jack mounting position

[RE09300(ALL)01/95] 2. Remove the lug nuts by using the lugwrench. Never loosen the hub nuts. See thefollowing illustration if you are not surewhere to find the lug nuts.


179

[RE09400(ALL)06/94]


Lug nut positions

*[RE09700(ALL)01/95] 3. Replace the flat tire with the spare tire.

[RE09800(ALL)01/95] 4. Replace the lug nuts and tighten snug. Thebeveled edge faces inward. Do not fullytighten the lug nuts until you lower thevehicle. If you do, you could force thevehicle off the jack.

[RE09990(ALL)05/95] Your vehicle has been built with metric (12 mm)threads on the wheel studs and lug nuts. Makecertain, during wheel removal, the same nutsremoved are reinstalled, or if replaced, nuts withmetric threads and the same chamferconfiguration are used.


180


Installation of an English thread nut on ametric stud (or vice-versa) will notproperly secure the wheel to the hub.Damaged studs may result in wheelseparation and possible injury.

*[RE10200(ALL)01/95] 5. Lower the vehicle by turning the jack handlecounterclockwise.

[RE10300(ALL)01/95] 6. Remove the jack and fully tighten the lugnuts in the order shown in the illustrationunder step 2.

[RE10700(ALL)01/95] 7. Put the tire, jack, and wrench away.

[RE10750(ALL)01/95] 8. Unblock the wheels.

*[RE12150(ALL)12/91] If the Engine Cranks but DoesNot Start or Starting After aCollision

*[RE12200(ALL)03/95] If the engine cranks but does not start or if youhave had a collision, the fuel pump shut-offswitch may have been triggered. The shut-offswitch is a device that stops the fuel pumpwhen your vehicle has been involved in asubstantial jolt.

*[RE12250(ALL)01/95] For information on how to check and reset thefuel pump shut-off switch, see Fuel pump shut-offswitch in the Index.


181

*[RE12300(ALL)05/95] Towing Your Vehicle

*[RE12400(ALL)06/95] If you need to have your vehicle towed, contacta professional towing service or, if you are amember, your roadside assistance center.Recommended towing options include wheel lifttowing or flat bed towing.

[RE12450(ALL)05/95]


*[RE12500(ALL)05/95] When calling for a tow truck, tell the operatorwhat kind of vehicle you have. A towingmanual is available from Ford Motor Companyfor all authorized tow truck operators. Haveyour tow truck driver refer to this manual forthe proper hook-up and towing procedures foryour vehicle.


182

*[RE13000(ALL)01/89] Towing With the Back Wheels Off theGround

[RE13100(ALL)03/94] For automatic and manual transaxle vehicles, ifit is necessary to tow your vehicle from the rear(with the rear wheels off the ground), a dollymust be placed under the front tires to preventtransaxle damage.

[RE13110(ALL)04/93] If the slingbelt towing method must be used, usethe following procedure:

[RE13120(ALL)04/93] 1. Place the front wheels on wheel dollies.

[RE13130(ALL)04/93] 2. Place T-hooks into the T-hook slots locatedon the frame rail behind the rear wheels.

[RE13135(ALL)04/93] 3. Route the tow chain to clear the exhaustpipes.

[RE13140(ALL)04/93] 4. Position the tow bar under the rear bumper.

[RE13150(ALL)04/93] 5. Slowly raise the vehicle off the ground.

[RE13160(ALL)04/93] 6. Attach safety chains around the rearcrossmember.


183

[RE13170(ALL)04/93]

two third page art:0032195-A

*[RE13200(ALL)01/94] Do not use your vehicle’s steering column lockto secure the wheels in a straight-ahead position.Always use a steering wheel clamping devicedesigned for towing service.

*[RE13250(ALL)02/92] Refer to Towing behind another vehicle —recreational vehicle in the Index for information ontowing behind an RV.


185

Customer Assistance

*[HS00210(ALL)06/94] Roadside Assistance

*[HS00215(ALL)05/95] Ford Motor Company has set up a 24-hour,seven-day-a-week hotline with trained operatorsthat put you in touch with the help you need ifyou experience a problem with your vehicle.This complimentary service is provided to youthroughout your warranty period of 3 years or36,000 miles (60,000 km), whichever comes first.To purchase Roadside Assistance coveragesbeyond this period (available through Ford AutoClub in the United States or Ford andLincoln-Mercury dealers in Canada), contactyour Ford or Lincoln-Mercury dealer.

*[HS00220(ALL)06/94] Roadside Assistance will cover the following:

*[HS00225(ALL)06/94] ❑Mount your spare if you have a flat tire.

*[HS00230(ALL)06/94] ❑ Jump-start your battery if it is dead.

*[HS00235(ALL)06/94] ❑Unlock your vehicle if you are locked out.

*[HS00240(ALL)06/94] ❑Bring you fuel if you run out.

*[HS00245(ALL)06/94] ❑Tow your vehicle if you are stranded. Evennon-warranty related tows, like accidents orgetting stuck in mud or snow, are covered(some exclusions apply, such as impoundtowing and repossession).

File:prhsp.exUpdate:Fri Jun 23 19:34:09 1995

186

*[HS00250(ALL)06/94] How to use Roadside Assistance

*[HS00255(ALL)06/94] Your Roadside Assistance identification card canbe found in the Owner Guide portfolio in yourglove compartment. Complete the card and placeit in your wallet for quick reference.

*[HS00260(ALL)04/95] To receive roadside assistance in the UnitedStates call 1-800-241-FORD (in Canada call1-800-665-2006).

*[HS00265(ALL)04/95] Should you need to arrange for roadsideassistance yourself, Ford Motor Company willreimburse the reasonable cost. To obtaininformation about reimbursement call1-800-241-FORD (in Canada call 1-800-665-2006).

*[HS00300(ALL)01/95] If You Have a Service Problem

*[HS00400(ALL)01/95] Ford Motor Company has authorized Ford andLincoln-Mercury dealerships that can serviceyour vehicle for you. This chapter tells you howto get service or maintenance for your vehicle.

%*[HS00455(ALL)03/95] Service/Maintenance Concerns(U.S. or Canada)

*[HS00600(ALL)04/95] Ford recommends taking your vehicle to yourselling dealer who wants to ensure yourcontinued satisfaction. You may, however, takeyour vehicle to any authorized Ford orLincoln-Mercury dealer. In most cases, yourdealer will be able to resolve your concern.

*[HS00700(ALL)04/95] If you are not satisfied with the service youreceived from your dealership’s servicedepartment, talk to the service manager at thedealership, or if you still are not satisfied, talk tothe owner or general manager of the dealership.In most cases, you will have your concernresolved at this level.


187

*[HS01000(ALL)03/95] If you are away from home when your vehicleneeds to be serviced, or if you need more helpthan the dealer gave you, contact the FordCustomer Assistance Center to find anauthorized dealership that may be able to help.

*[HS01200(ALL)04/95] To process your request, the Ford CustomerAssistance Center needs the followinginformation:

*[HS01300(ALL)04/95] ❑your telephone number (both business andhome)

*[HS01400(ALL)04/95] ❑ the name of the dealer and the city where thedealership is located

*[HS01500(ALL)03/95] ❑ the year and make of your vehicle

*[HS01550(ALL)03/95] ❑ the date purchased

*[HS01600(ALL)03/95] ❑ the current mileage on your vehicle

*[HS01700(ALL)03/95] ❑your Vehicle Identification Number (VIN)(listed on your owner card)

%*[HS01900(ALL)03/95]

one inch art:0060100-E

*[HS02200(ALL)03/95] If you still have a service or product complaint,you may wish to contact the Dispute SettlementBoard (U.S. only) or the Canadian Motor VehicleArbitration Plan (CAMVAP) in Canada.


188

*[HS02300(ALL)02/95] The Dispute Settlement Board(U.S. Only)

*[HS02400(ALL)03/95] The Dispute Settlement Board is a voluntary,independent dispute-settlement programavailable free to owners or lessees of qualifyingFord Motor Company vehicles.

*[HS02500(ALL)01/95] The Dispute Settlement Board may not beavailable in all states. Ford Motor Companyreserves the right to change eligibilitylimitations, modify procedures and/or todiscontinue this process at any time withoutnotice and without incurring obligations.

*[HS02600(ALL)01/95] What Kind of Cases Does the BoardReview?

*[HS02700(ALL)03/95] The Board reviews all product performance andservice complaints on Ford, Mercury and LincolnCars and Ford and Mercury Light Trucks underwarranty that have not been resolved by adealer or Ford Motor Company, except thoseinvolving:

*[HS02800(ALL)01/95] ❑A non-Ford product

*[HS02900(ALL)01/95] ❑A non-Ford dealership

*[HS03100(ALL)01/95] ❑A vehicle sales transaction

*[HS03200(ALL)01/95] ❑A request for reimbursement of consequentialexpenses unless incidental to a service orproduct complaint being reviewed

*[HS03300(ALL)01/95] ❑ Items not covered by your warranty

*[HS03400(ALL)01/95] ❑Alleged liability claims

*[HS03450(ALL)01/95] ❑Property damage where such damage issignificant when compared to the economicloss alleged under the warranty dispute


189

*[HS03500(ALL)01/95] ❑Cases currently in litigation

*[HS03600(ALL)01/95] ❑Vehicles not used primarily for personal,family, or household purposes

*[HS03650(ALL)01/95] NOTE: Complaints involving vehicles onwhich applicable express written newvehicle warranties have expired atreceipt of your application are noteligible. Eligibility may differaccording to state law. For example, seethe unique brochure for Californiapurchasers/lessees.

*[HS03700(ALL)04/95] How Does the Board Work?

*[HS03800(ALL)04/95] The Board has four members:

*[HS03900(ALL)04/95] ❑ three consumer representatives

*[HS04000(ALL)04/95] ❑a Ford or Lincoln-Mercury dealer

*[HS04200(ALL)04/95] Consumer candidates for Board membership arerecruited and trained by an independentconsulting firm. Dealers are chosen because oftheir business leadership qualities.

*[HS04300(ALL)04/95] If the involved vehicle is within 36 months and36,000 miles of the date of delivery (warrantystart date), you have a right to make an oralpresentation before the Board by indicating yourchoice on the application. Also, oralpresentations may be requested by the Board. Adecision is made by the Board by simplemajority vote.

*[HS04350(ALL)04/95] Board members review all the materials relatedto each complaint and, based on the availableinformation, arrive at a fair and impartialdecision. Decisions are based on the writtenstatements and any oral presentations made byeach of the involved parties.


190

*[HS04400(ALL)04/95] Because the Board usually meets only once amonth, some cases will take longer than 30 daysto be reviewed. The Board will make everyeffort to resolve each case within 40 days after itreceives the customer application form.

*[HS04500(ALL)04/95] After your case has been reviewed, the Boardwill mail you its decision in writing. It will alsoprovide you with a form to indicate youracceptance or rejection of an award decision. Thedecisions of the Board are binding on the dealerand Ford, but customers may have other optionsavailable to them under state or federal law.

*[HS04600(ALL)04/95] The decisions of the Board, however, may beintroduced into evidence by any party insubsequent legal proceedings that may beinitiated.

*[HS04700(ALL)01/95] How Do You Contact the Board?

*[HS04800(ALL)04/95] Write to the Board at the following address torequest a brochure/application. You will be senta brochure and a one-page customer applicationform. The form should be completed and mailedto the same address.

*[HS04900(ALL)02/93]

one inch art:0060102-B


191

*[HS05100(ALL)04/95] What is the Review Process?

*[HS05200(ALL)04/95] Your application will be reviewed and if it isdetermined to be eligible, you will receive anacknowledgment indicating the file numberassigned to your application and the local Boardaddress. At the same time, your dealer and FordMotor Company representative are asked tosubmit statements.

*[HS05300(ALL)04/95] To review your case properly, the Board needsthe following information:

*[HS05400(ALL)04/95] ❑ legible copies of all documents andmaintenance or repair orders that relate tothe case

*[HS05500(ALL)04/95] ❑ the year, make, model, and vehicleidentification number

*[HS05600(ALL)04/95] ❑ the date you bought your vehicle

*[HS05700(ALL)04/95] ❑ the date of repair and the mileage at the timeof repair

*[HS05800(ALL)04/95] ❑ the current mileage

*[HS05900(ALL)04/95] ❑ the name of the dealer who sold you thevehicle or who serviced your vehicle

*[HS06000(ALL)04/95] ❑a brief description of your unresolvedcomplaint

*[HS06100(ALL)05/95] ❑a brief summary of actions that were takenwith the dealer and Ford Motor Company

*[HS06200(ALL)05/95] ❑ the names (if known) of all people youcontacted at the dealership

*[HS06300(ALL)04/95] ❑a description of the action you want done toresolve your concern.

*[HS06305(ALL)04/95] Should your application NOT qualify for review,an explanation will be mailed to you.


192

*[HS06320(ALL)04/95] Reporting Safety Defects(U.S. Only)

*[HS06340(ALL)01/95] If you believe that your vehicle has a defectwhich could cause a crash or could cause injuryor death, you should immediately inform theNational Highway Traffic Safety Administration(NHTSA) in addition to notifying Ford MotorCompany.

*[HS06360(ALL)01/95] If NHTSA receives similar complaints, it mayopen an investigation, and if it finds that asafety defect exists in a group of vehicles, it mayorder a recall and remedy campaign. However,NHTSA cannot become involved in individualproblems between you, your dealer, or FordMotor Company.

*[HS06380(ALL)01/95] To contact NHTSA, you may either call the AutoSafety Hotline toll-free at 1-800-424-9393 (or366-0123 in the Washington, D.C. area) or writeto: NHTSA, U.S. Department of Transportation,400 Seventh Street, Washington D.C. 20590. Youcan also obtain other information about motorvehicle safety from the Hotline.

*[HS06381(ALL)05/95] Ford of Canada CustomerAssistance

*[HS06382(ALL)03/95] Ford Motor Company of Canada, Limited

*[HS06383(ALL)03/95] If you live in Canada and have any questions orconcerns that the dealership cannot answer,contact the Customer Assistance Centre.

*[HS06384(ALL)03/95]

one inch art:0060101-C


193

*[HS06385(ALL)04/95] Please have the following information availablewhen contacting the Customer Assistance Centre:

*[HS06386(ALL)04/95] ❑your telephone number (both business andhome)

%*[HS06387(ALL)03/95] ❑your Vehicle Identification Number (VIN)listed on your owner card and/or yourvehicle ownership license

*[HS06388(ALL)04/95] ❑ the year and make of your vehicle

*[HS06389(ALL)04/95] ❑ the date purchased

*[HS06390(ALL)04/95] ❑ the name of the dealer and the city where thedealership is located

*[HS06391(ALL)03/95] ❑ the current mileage on your vehicle

%*[HS06392(ALL)03/95] Canadian Motor Vehicle Arbitration Plan(CAMVAP)

*[HS06393(ALL)03/95] If a specific item of concern arises, where asolution cannot be reached between a vehicleowner, Ford of Canada, and/or one of itsdealers (that all parties can agree upon), theowner may wish to use the services offered bythe Canadian Motor Vehicle Arbitration Plan(CAMVAP).

*[HS06394(ALL)05/95] CAMVAP uses the services of ProvincialAdministrators to assist consumers in schedulingand preparing for their arbitration hearings.However, before you can proceed withCAMVAP you must follow your manufacturer’sdispute resolution process as outlined under“Service/Maintenance Concerns (U.S. orCanada)” earlier in this chapter.


194

*[HS06395(ALL)05/95] Consumers wishing to obtain further informationabout the program can obtain an informationbooklet from your dealer or contact theProvincial Administrator, Canadian MotorVehicle Arbitration Plan, at the address ortelephone number shown below.

*[HS06396(ALL)05/95] O & P Services595 Bay Street — Suite 300Toronto, OntarioM5G 2C2Telephone 1 (800) 207-0685

[HS06397(ALL)04/95] This plan is not available in the province ofQuebec.

*[HS06400(ALL)06/95] Getting Help Outside the U.S.and Canada

*[HS06500(ALL)06/95] Before you export your vehicle to a foreigncountry, contact the appropriate foreign embassyor consulate to make sure local regulations donot prevent you from registering your vehicle.Officials at the embassy can also help you decidewhether you should import your vehicle to thatcountry.

*[HS06600(ALL)06/95] Officials at the embassy or consulate can tell youwhere to get unleaded fuel. If you cannot getunleaded fuel or can get only fuel with ananti-knock index that is lower than your vehicleneeds, contact a district or owner relations officebefore you leave the U.S. or Canada.

*[HS06700(ALL)06/95] Use of leaded fuel in your vehicle without aproper conversion may damage the effectivenessof your emissions control system and may causeengine knocking or serious engine damage. FordMotor Company is not responsible for anydamage that is caused by use of improper fuel.


195

*[HS06800(ALL)06/95] You may also have difficulty importing yourvehicle back into the U.S. if you use leaded fuel.

*[HS06900(ALL)06/95] If your vehicle must be serviced while you aretraveling or living in Central or South America,the Caribbean, or the Middle East, contact thenearest Ford dealership. If the dealership cannothelp you, write to:

*[HS07000(ALL)06/95]


*[HS07100(ALL)06/95] If you are in other foreign countries, contact thenearest Ford dealership. If the dealership cannothelp you, they can direct you to the appropriateFord affiliate office.

*[HS07200(ALL)06/95] If you buy your vehicle in North America andthen relocate outside of the U.S. or Canada,register your Vehicle Identification Number andnew address with Ford Motor Company ExportOperations.


197

Accessories

*[AC00400(ALL)03/95] Ford Accessories for Your Vehicle

*[AC00425(ALL)04/95] Ford has many fine products available fromyour dealer to clean your vehicle and protect itsfinishes. For best results, use the following, orproducts of equivalent quality:

*[AC00450(ALL)05/95]

twelve pica chart:0001433-A

*[AC00500(ALL)04/95] A wide selection of accessories is availablethrough your local authorized dealer. These fineaccessories have been engineered specifically tofulfill your automotive needs. They are customdesigned to complement the style andaerodynamic appearance of your Ford-builtvehicle. In addition, each accessory is made fromhigh quality materials and meets or exceedsFord’s rigid engineering and safety specifications.That is why Ford brand accessories arewarranted for up to 3 years or 36,000 miles(60,000 km), whichever comes first. See yourdealer for complete warranty information andaccessory availability.

File:pracp.exUpdate:Fri Jun 23 19:33:54 1995

198

*[AC00600(ALL)06/93] Comfort and Convenience

[AC00700(ALL)04/95]

six pica chart:0032185-B

*[AC00950(ALL)06/93] Protection and Appearance

[AC01000(ALL)04/95]

fourteen pica chart:0031992-H

*[AC01300(ALL)01/95] NOTE: When adding accessories, equipment,passengers, and luggage to yourvehicle, do not exceed the total weightcapacity of the vehicle or of the frontor rear axle (GVWR, GAWR as shownon the Safety Compliance CertificationLabel). Consult your dealer for specificweight information.


199

*[AC01400(ALL)05/95] NOTE: The Federal CommunicationsCommission (FCC) or the CanadianRadio Telecommunications Commission(CRTC) regulates the use of mobilecommunications systems — such astwo-way radios, telephones, and theftalarms — that are equipped with radiotransmitters. Any such equipmentinstalled in your vehicle should complywith FCC or CRTC regulations andshould be installed only by a qualifiedtechnician.

*[AC01500(ALL)01/95] NOTE: Mobile communications systems mayharm the operation of your vehicle,particularly if they are not properlydesigned for automotive use or are notproperly installed. For example, whenoperated, such systems may cause theengine to stumble or stall. In addition,such systems may themselves bedamaged or their operation affected byoperating your vehicle. (Citizens band[CB] transceivers, garage door openers,and other transmitters whose poweroutput is 5 watts or less will notordinarily affect your vehicle’soperation.)

*[AC01600(ALL)05/95] NOTE: Because we have no control over theinstallation, design, or manufacture ofsuch systems, Ford cannot assumeresponsibility for any adverse effects ordamage that may result if you use thisequipment.


200

[AC01700(ALL)04/93]

thirty-six pica chart:0032110-A


201

[AC01800(ALL)04/93]



202

[AC01900(ALL)04/93]



203

Servicing Your Probe

%*[SV00300(ALL)03/95] Service Made Easy

*[SV00400(ALL)01/95] Ford has two goals for servicing your vehicle.

*[SV00500(ALL)01/95] 1. When we can, we design parts that do notneed to be serviced.

*[SV00600(ALL)01/95] 2. We want to make servicing your vehicle aseasy as possible. To help you:

*[SV00700(ALL)01/95] ❑We highlight do-it-yourself items in yellow inthe engine compartment so that you can findthem easily.

*[SV00800(ALL)01/95] ❑When possible, we design parts — such asthe headlamp bulbs — that can be replacedwithout tools.

*[SV00900(ALL)05/94] ❑We give you a Maintenance Schedule thatmakes tracking routine service for yourvehicle easy. The maintenance schedule islocated in the Maintenance Schedule and Recordbooklet.

*[SV00925(ALL)01/95] This chapter tells you about the basic parts thatyou need to check and service regularly.

*[SV00930(ALL)02/95] If your vehicle needs professional servicing, yourdealership can provide the parts and servicerequired. Check your Warranty Information Bookletto find out which parts and services are covered.Also see the Customer Assistance chapter of thisOwner Guide.

File:prsvp.exUpdate:Fri Jun 23 19:33:26 1995

204

*[SV01000(ALL)03/95] Ford Motor Company recommends that youperform the Owner Maintenance Checks listed inthe Maintenance Schedule and Record booklet.These services are important for the properoperation of your vehicle. In addition to theconditions listed in the Owner MaintenanceChecklist, be alert for any unusual noise,vibration, or other indication that your vehiclemay need service. If you do notice somethingunusual, see that your vehicle is servicedpromptly.

*[SV01100(ALL)09/93] Use only recommended fuels, lubricants, fluids,and service parts that meet Ford MotorCompany specifications. Motorcraft parts aredesigned and built to provide the bestperformance in your vehicle. Using these partsfor replacement is your assurance that Ford-builtquality stays in your vehicle.

%*[SV01150(ALL)04/95] NOTE: Always dispose of used automotivefluids in a responsible manner. Followyour community’s standards fordisposing of these types of fluids. Callyour local recycling center to find outabout recycling automotive fluids.

*[SV01600(ALL)03/95] Precautions When Servicing YourVehicle

*[SV01700(ALL)01/95] Be especially careful when inspecting orservicing your vehicle. Here are some generalprecautions for your safety:

%*[SV01800(ALL)03/95] ❑Do not work on a hot engine. The enginecooling fan may come on unexpectedly.Always turn the engine off and let it cool.


205

*[SV01850(ALL)05/95] RWARNING

The cooling fan is automatic and maycome on at any time. Always disconnectthe negative terminal of the battery beforeworking near the fan.

*[SV01900(ALL)03/95] ❑ If you must work with the engine running,avoid wearing loose clothing or jewelry thatcould get caught in moving parts. Takeappropriate precautions with long hair.

*[SV02000(ALL)01/95] ❑Do not work on a vehicle in an enclosedspace with the engine running, unless you aresure you have enough ventilation.

*[SV02100(ALL)01/95] ❑Never get under a vehicle while it issupported by a jack only. If you must workunder a vehicle, use safety stands.

*[SV02200(ALL)01/95] ❑Keep all lit cigarettes and other smokingmaterials away from the battery and allfuel-related parts.

*[SV02500(ALL)03/95] If you disconnect the battery, the engine must“relearn” its idle conditions before your vehiclewill drive properly. To find out how the enginedoes this, see Battery in this chapter.

*[SV02700(ALL)03/95] Working with the engine off:

[SV02750(ALL)02/95] 1. Set the parking brake fully and make surethe gearshift is securely latched in P (Park)(automatic transaxle) or Neutral (manualtransaxle).

*[SV02800(ALL)03/95] 2. Remove the key from the ignition after youturn the engine off.

*[SV02850(ALL)03/95] 3. Block the wheels. This will prevent yourvehicle from moving unexpectedly.


206

*[SV02900(ALL)03/95] Working with the engine on:

*[SV03000(ALL)04/95] 1. Set the parking brake fully and make surethe gearshift is securely latched in P (Park)(automatic transaxle) or Neutral (manualtransaxle).

*[SV03100(ALL)03/95] 2. Block the wheels. This will prevent yourvehicle from moving unexpectedly.


Do not start your engine with the aircleaner removed and do not remove itwhile the engine is running.

%*[SV03400(ALL)03/95] Opening the Hood

%*[SV03500(ALL)01/95] 1. Inside the vehicle, pull the hood releasehandle located under the bottom left cornerof the instrument panel.

%*[SV03600(ALL)02/95] 2. Go to the front of the vehicle and release theauxiliary latch that is located under the hoodat the center of the vehicle.

[SV03750(ALL)01/95] 3. Lift the hood and set the prop rod in thehole in the hood marked with an arrow.

*[SV03800(ALL)11/90] When you close the hood, make sure the proprod is in its retainer and that the hood latchessecurely.


207

[SV03900(ALL)01/94]


The hood release handle

[SV04100(ALL)01/95] NOTE: Apply lubricant to the hood latch atsix-month intervals to maintain smoothand trouble-free operation.

[SV04200(ALL)01/95] NOTE: Read and understand Precautions WhenServicing Your Vehicle at the beginningof this chapter before opening thehood.

[SV04450(ALL)01/92] Engine Types

*[SV04600(ALL)09/93] Your vehicle has one of these types of engines:

[SV04700(ALL)01/92] ❑a 2.0L (121 CID) fuel injected 16-valvefour-cylinder engine.

[SV04800(ALL)01/95] ❑a 2.5L (152 CID) fuel injected 24-valvesix-cylinder engine.


208

[SV05400(ALL)06/94]

threefourthspageart:0032074-B

Th

e2.0L

engin

e

File:prsvp.exU

pdate:Fri Jun 23 19:33:26 1995

209

[SV05500(ALL)06/94]

threefourthspageart:0032081-E

Th

e2.5L

engin

e

File:prsvp.exU

pdate:Fri Jun 23 19:33:26 1995

210

%*[SV05600(ALL)04/95] Cleaning the Engine

*[SV05610(ALL)04/95] A clean engine is more efficient because theengine is able to cool properly. A build up ofgrease and dirt acts as an insulator, keeping theengine warmer than normal.

*[SV05620(ALL)05/95] ❑Extreme care must be used if a power washeris used to clean the engine. The high pressurefluid could penetrate sealed parts andassemblies causing damage or malfunctions.

*[SV05630(ALL)04/95] ❑ In order to avoid possible cracking of theengine block or fuel injection pump, do notspray a hot engine or injection pump withcold water.

*[SV05640(ALL)06/95] ❑The alternator, distributor and air intake mustbe covered. Covering these components willhelp prevent water damage.

*[SV05650(ALL)04/95] Never wash or rinse the engine while it isrunning. Water getting into the engine maycause internal damage.

*[SV06100(ALL)03/95] Filling the Fuel Tank[SV06200(ALL)03/90] Fuel filler door release lever

[SV06300(ALL)11/91] Your vehicle is equipped with a fuel filler doorrelease. To open the fuel filler door, pull up onthe release lever which is located in front of thedriver’s seat and near the door.

[SV06350(ALL)01/94] Remote Fuel Filler-Lid Release Override

[SV06410(ALL)01/95] If the release does not operate, open thehatchback, remove the trim on the left rear side,reach into the opening and pull the latch towardthe rear (see the service manual for trimremoval). You should wear gloves to protectyour hands from any sharp edges when you usethe fuel filler-lid release override.


211

[SV06450(ALL)03/94]


Manual fuel filler-lid override (behind left rear trim panelin hatch)

[SV06505(ALL)05/95] To fill the fuel tank:

*[SV06550(ALL)05/95] 1. After opening the fuel filler door, removethe cap carefully and slowly by turning itcounterclockwise 1/2 to 3/4 turn.


The fuel system may be under pressure. Ifthe fuel cap is venting vapor or if youhear a hissing sound while disengagingthe fuel cap, wait until it stops beforecompletely removing the cap. Otherwise,fuel may spray out and injure you orothers.

*[SV06700(ALL)05/95] 2. Put the nozzle all the way inside the fuelfiller pipe before pumping the fuel.


212

*[SV06800(ALL)05/95] NOTE: If you spill any fuel on the body ofyour vehicle, clean it off immediately.The fuel may dull or soften the paintif you do not wash it off.

*[SV06850(ALL)05/95] 3. Replace the fuel cap completely when youare finished. Turn it clockwise 1/4 turn untilit is tight. It will click when it is fullytightened.

*[SV06875(ALL)05/95] 4. Push the fuel door closed.

[SV07545(ALL)05/95] If you lose the fuel cap, replace it with anauthorized Motorcraft or equivalent part.

%*[SV07550(ALL)05/95] RWARNING

If you do not use the proper fuel cap, thepressure in the fuel tank can damage thefuel system or cause it to work improperlyin a collision.

*[SV07560(ALL)05/95] NOTE: If you replace your fuel cap with anaftermarket fuel filler cap, the customerwarranty may be void for any damageto the fuel tank and/or fuel system.

%*[SV07670(ALL)05/95] Choosing the Right Fuel

*[SV07680(ALL)05/95] Use only UNLEADED FUEL in your vehicle.Using leaded fuel is prohibited by federal law.Your warranty may not apply if your vehicle isdamaged because you used the wrong fuel.

*[SV07690(ALL)05/95] Using a high-quality fuel makes your vehiclemore responsive and maintain its good fueleconomy and emissions. It should not benecessary to add any aftermarket products toyour fuel tank if you continue to use ahigh-quality fuel.


213

[SV08750(ALL)05/95] Octane recommendations

*[SV08850(ALL)05/95] Your engine is designed to use fuel with anoctane rating of 87. In most cases it is notnecessary to use a fuel with an octane ratinghigher than 87. At service stations, the octanerating is displayed in a label on the pumps.

[SV09000(ALL)05/95] Your 2.5L engine is designed to use fuel withan octane rating of 91 or higher. In some partsof the country “premium” grade fuels are soldwith octane ratings of less than 91 especially inhigh altitude areas. We recommend that you useonly those “premium” fuels with an octanerating of 91 or higher.

*[SV09100(ALL)05/95] Using a fuel with a lower octane rating cancause persistent and heavy knocking, which candamage the engine.

*[SV09200(ALL)05/95] Do not be concerned if your vehicle sometimesknocks lightly when you drive up a hill or whenyou accelerate. However, see your dealer or aqualified service technician if persistent heavyknocking occurs because this can damage theengine.


214

*[SV09350(ALL)05/95] If your vehicle has problems with starting, roughidle or hesitation problems when the engine iscold, it may be caused by fuel with lowvolatility. Try a different brand of fuel. If thecondition persists, see your dealer or a qualifiedservice technician.

*[SV09520(ALL)04/95] Gasolines for clean air

*[SV09530(ALL)06/95] Fuels in certain areas of the country are requiredto contain oxygenates to improve air quality.Common oxygenates are ethanol or grain alcohol(blended at no more than 10%), methanol orwood alcohol (blended at no more than 5% withcosolvents and additives), and MTBE or methyltertiary butyl ether (blended at no more than15%).

*[SV09540(ALL)05/95] Reformulated fuel is also required in certainareas of the U.S. These fuels are designed tofurther reduce the emissions from your vehicle.

*[SV09550(ALL)06/95] Generally, you should not experience difficultiesoperating your vehicle on fuels containingoxygenates. We encourage you to use thesefuels.

*[SV10185(ALL)06/95] Safety Information Relating to AutomotiveFuels


Automotive fuels can cause serious injuryor death if misused or mishandled.

*[SV10197(ALL)05/95] ❑Turn vehicle off when refueling

*[SV10199(ALL)05/95] ❑Do not smoke when refueling. Fuels areextremely flammable.

*[SV10201(ALL)05/95] ❑Do not siphon any fuel by mouth.


215


Gasoline or gasoline blended withmethanol can cause blindness andpossible death when swallowed. If anyfuel is swallowed, call a physician orpoison control center immediately.

*[SV10209(ALL)05/95] ❑Avoid breathing vapors while refueling.

*[SV10211(ALL)05/95] ❑ If fuel is splashed on the skin, wash withsoap and water.

*[SV10225(ALL)05/95] ❑ If fuel is splashed in the eyes, remove contactlenses (if worn), flush with water for 15minutes, and seek medical attention.

*[SV10227(ALL)05/95] Gasoline and gasoline blends may contain smallamounts of carcinogens, such as benzene.Long-term exposure to unleaded gasoline vaporshas caused cancer in laboratory animals.

*[SV10230(ALL)05/95] If you are taking the medication “Antabuse” orother forms of disulfiram for the treatment ofalcoholism, vapor or skin contact with agasoline-methanol blend may cause the samekind of adverse reaction as drinking an alcoholicbeverage. In sensitive individuals, seriouspersonal injury or sickness could result. Consulta physician promptly if you experience anadverse reaction.

%*[SV11300(ALL)05/95] Running Out of Fuel

*[SV11350(ALL)05/95] NOTE: Avoid running out of fuel because thissituation may have an adverse effect onmodern powertrain components.

*[SV11500(ALL)05/95] You may need to crank the engine several timesbefore the fuel system starts to pump fuel fromthe tank to the engine.


216

%*[SV11600(ALL)05/95] Fuel Economy

*[SV11700(ALL)05/95] Fuel economy is an estimate of the efficiency ofyour vehicle and can be calculated as Miles PerGallon (MPG) or Liters Per 100 Kilometers(L/100K).

*[SV11750(ALL)05/95] Do not calculate fuel economy during yourvehicle’s break-in period. This would not be anaccurate estimate of how much fuel your vehiclewill normally use.

*[SV11800(ALL)05/95] To calculate fuel economy:

*[SV11900(ALL)06/95] 1. Fill the tank completely and record theinitial odometer reading.

*[SV12000(ALL)05/95] 2. Every time you buy fuel record theamount (in gallons or liters) purchased.

*[SV12200(ALL)05/95] 3. After at least three to five tankfuls, fill thefuel tank and record the final odometerreading.

*[SV12225(ALL)05/95] 4. Use these equations to calculate your fueleconomy:

*[SV12250(ALL)05/95] ❑English: MPG = (total miles driven) V(gallons used)

*[SV12275(ALL)05/95] ❑Metric: L/100k = (liters used) V(100 kilometers)

*[SV12300(ALL)05/95] Comparisons With EPA Estimates

*[SV12400(ALL)05/95] EPA fuel economy figures are obtained fromlaboratory tests under simulated road conditionsand may not reflect the actual conditions youexperience or your style of driving. The EPAfuel economy estimate is not a guarantee thatyou will achieve the fuel economy shown.


217

*[SV12650(ALL)05/95] The following decrease fuel economy:

*[SV12700(ALL)05/95] ❑Lack of regular, scheduled maintenance

*[SV12800(ALL)05/95] ❑Rapid acceleration and excessive speed

*[SV12850(ALL)05/95] ❑Driving with your foot on the brake

*[SV12902(ALL)05/95] ❑Sudden stops

*[SV12950(ALL)05/95] ❑Extended engine idling

*[SV13000(ALL)05/95] ❑Using speed control in hilly terrain

*[SV13100(ALL)05/95] ❑Extended use of the A/C, defroster, rearwindow defroster and other accessories

*[SV13200(ALL)05/95] ❑Underinflated tires

*[SV13300(ALL)05/95] ❑Heavy loads

*[SV13400(ALL)05/95] ❑Aftermarket add-ons such as bike, ski orluggage racks, bug deflectors, etc.

*[SV13600(ALL)03/95] Engine Oil Recommendations

*[SV13610(ALL)05/95] We recommend using Motorcraft oil or anequivalent oil meeting Ford SpecificationESE-M2C153-E and displaying the AmericanPetroleum Institute CERTIFICATION MARK onthe front of the container.

*[SV13650(ALL)03/95]

one third page art:0060021-E

The API Certification Mark


218

*[SV13670(ALL)01/95] Never use:

*[SV13680(ALL)01/95] ❑“Non-Detergent” oils

*[SV13690(ALL)04/95] ❑Oils labeled API SA, SB, SC, SD, SE, SF or SG

%*[SV13700(ALL)01/95] ❑Additional engine oil additives, oil treatmentsor engine treatments

*[SV13725(ALL)04/95] Engine oils with an SAE 5W-30 viscosity arePREFERRED for your vehicle. They provide thebest engine performance, fuel economy andengine protection for all climates down to -15˚F(-25˚C).

%*[SV13750(ALL)03/95] Synthetic engine oils which are CERTIFIED andof the preferred viscosity may be used in yourengine. The engine oil and oil filter must still bechanged according to the maintenance schedule.

*[SV13775(ALL)01/95] Checking and Adding Engine Oil

*[SV13800(ALL)03/95] Since the proper amount of engine oil isimportant for safe engine operation, check the oilusing the dipstick each time you put fuel inyour vehicle. Remember the engine must be off,the oil must be warm and the vehicle must beparked on level ground.

*[SV13900(ALL)04/95] Checking the engine oil level:

*[SV14000(ALL)02/95] 1. Turn the engine off after it has warmed upand allow a few minutes for the engine oilto drain back into the oil pan.

*[SV14050(ALL)05/94] 2. Set the parking brake fully and make surethat the gearshift is securely latched in P(Park) (automatic transaxle) or 1 (First)(manual transaxle).

*[SV14100(ALL)02/95] 3. Open the hood. Protect yourself from engineheat.

*[SV14200(ALL)03/95] 4. Locate the engine oil dipstick (highlighted inyellow) and carefully pull it out of theengine.


219

*[SV14300(ALL)01/95] 5. Wipe the dipstick clean and put it back intoposition, making sure it is fully seated.

[SV14400(ALL)01/93]


Engine oil dipstick

[SV14500(ALL)05/95] 6. Carefully, pull the dipstick out again. If theoil level is below the L line, add engine oilas necessary. If the oil level is beyond theletter F, engine damage or high oilconsumption may occur and some oil mustbe removed from the engine.

*[SV14600(ALL)01/95] 7. Put the dipstick back in and make sure it isfully seated.

%*[SV14700(ALL)03/95] Adding engine oil

*[SV14800(ALL)01/95] It may be necessary to add some oil between oilchanges. Make sure you use a CERTIFIEDengine oil of the preferred viscosity. Yourvehicle’s warranty coverage may not apply ifengine damage is caused by the use of improperengine oil.

*[SV15000(ALL)03/95] Add engine oil through the oil filler caphighlighted in yellow. To add oil, remove thefiller cap and use a funnel to pour oil into theopening. Be careful not to overfill the engine.Recheck the oil level after you finish adding oil.


220

%*[SV16300(ALL)06/95] Changing the Engine Oil and the Oil Filter

*[SV16400(ALL)04/95] Change the engine oil and oil filter per thefollowing, whichever occurs first.

*[SV16500(ALL)04/95]


*[SV16600(ALL)06/95] Refer to the Maintenance Schedule and Recordbooklet for additional information.



Continuous contact with USED motor oilhas caused cancer in laboratory mice.

*[SV17285(ALL)05/95] Protect your skin by washing with soap andwater.


221

*[SV17400(ALL)03/95] Engine Coolant

*[SV17500(ALL)02/95] Checking the engine coolant

*[SV17550(ALL)01/95] NOTE: Be sure to read and understandPrecautions When Servicing Your Vehicleat the beginning of this chapter.


The cooling fan is automatic and maycome on at any time. Always disconnectthe negative terminal of the battery beforeworking near the fan.

[SV17900(ALL)02/92] Inspect the coolant level with the dipstickattached to the reservoir cap. Remove the cap,wipe it clean and then put it back in thereservoir. Remove it again. The coolant levelshould be between L and F.

[SV17950(ALL)01/92] If the coolant level is at or below the L line, addenough 50/50 mixture of specified coolant andwater to bring the level to the F mark.


222

[SV18200(ALL)01/92]


Engine coolant recovery reservoir and dipstick

*[SV18500(ALL)01/95] Adding engine coolant


Do not put engine coolant in the containerfor the windshield washer fluid.

*[SV18610(ALL)06/95] If sprayed to clean the glass, engine coolant orantifreeze could make it difficult to see throughthe windshield.

[SV18650(ALL)02/95] Add engine coolant only to the recoveryreservoir — not to the radiator. If the coolantlevel is low, add to the engine coolant recoveryreservoir container a 50/50 mixture of water andthe type of coolant that Ford specifies. Check thecoolant level again the next few times you driveyour vehicle.


223

[SV18750(ALL)05/95] RWARNING

Never remove the radiator cap or thecoolant system cap while the engine isrunning or hot to avoid personal injury.

[SV20300(ALL)05/95] 2.5L Engine

[SV20305(ALL)04/95] Before removing either cap, turn the engine offand let it cool. Even when the engine is cool, becareful when removing the caps.

[SV20310(ALL)04/95] 1. Locate the radiator breather cap and therecovery reservoir cap in your enginecompartment. The cap on the left is theradiator breather cap. The cap on the right isthe recovery reservoir cap.

[SV20320(ALL)04/95] 2. When the engine is cool, wrap a thick clotharound the radiator breather cap and turn itslowly to relieve pressure.

[SV20330(ALL)04/95] 3. Step back while the pressure releases.

[SV20335(ALL)04/95] 4. When you are sure all the pressure has beenreleased, use the cloth to turn and removecap.

[SV20340(ALL)04/95] 5. Stand away from the radiator opening. Hotsteam may blow out or hot engine coolantmay even splash out.

[SV20345(ALL)04/95] 6. After the pressure has been released youmay open the recovery reservoir cap andadd engine coolant. Failure to follow thisprocedure could result in serious personalinjury.


224

[SV20350(ALL)05/95] 2.0L Engine

*[SV20355(ALL)03/95] 1. Before you remove the cap, turn the engineoff and let it cool. Even when the engine iscool, be careful when you remove theradiator cap.

*[SV20360(ALL)05/95] 2. When the engine is cool, wrap a thick clotharound the cap and turn it slowlycounterclockwise to the first stop.

*[SV20370(ALL)03/95] 3. Step back while the pressure releases.

*[SV20375(ALL)03/95] 4. When you are sure that all the pressure hasbeen released, use the cloth to turn andremove cap.

*[SV20380(ALL)03/95] 5. Stand away from the radiator opening. Hotsteam may blow out or hot engine coolantmay even splash out.


Failure to follow these instructions couldresult in serious personal injury from hotengine coolant or steam blowout and/ordamage to the engine cooling system orengine.

*[SV20400(ALL)02/95] Ford Premium Cooling System Fluid is anoptimized formula that will protect all metalsand rubber elastomers used in Ford engines forfour years or 50,000 miles (80,000 km). It is notnecessary and not recommended to usesupplemental coolant additives in your vehicle.These additives may harm your engine coolingsystem. Follow the recommended service intervalfor changing your engine coolant.


225

*[SV20550(ALL)04/94] NOTE: When you change or add enginecoolant, it is important to maintainyour engine coolant concentrationbetween 40% (-11˚F [-24˚C]) and 60%(-62˚F [-52˚C]), depending on your localclimate conditions. Below 40% you willlose freeze protection and above 60%your engine may overheat on a warmday.

[SV20570(ALL)05/95] NOTE: Do not use an engine coolant that doesnot meet all 14 requirements of Fordspecification ESE-M97B44-A. The useof an improper coolant may void yourwarranty for the engine cooling system.Use only a premium nationallyrecognized brand name engine coolant.Do not use alcohol or methanolanitifreeze. If you do not use theproper coolant, the aluminum radiatoron your vehicle will corrode.

*[SV20575(ALL)05/95] Ford Motor Company expressly authorizes theFord Rotunda engine coolant recycling processand chemicals. Use only Ford Rotunda recycledengine coolant or an equivalent recycled enginecoolant that is certified by the supplier to meetFord specification ESE-M97B44-A.



226

%*[SV20600(ALL)01/95] Use Ford Premium Cooling System Fluid or anequivalent engine coolant that meets FordSpecification ESE-M97B44-A. Do not use alcoholor methanol antifreeze and do not use enginecoolant mixed with alcohol or methanolantifreeze. If you do not use the proper coolant,the aluminum radiator on your vehicle willcorrode.

*[SV20700(ALL)04/93] Leave the engine coolant in all year. Make surethat the coolant will not freeze at thetemperature level in which you drive duringwinter months. Keep an engine coolant in yourengine that has a protection rating of at least-20˚F (-29˚C), or whatever protection rating isappropriate for the climate in which you live.

*[SV20800(ALL)03/95] To find out how much engine coolant mixtureyour vehicle’s coolant system can hold, see Refillcapacities for fluids in the Index.

*[SV20900(ALL)02/95] You may add water by itself only in anemergency, but you should replace it with a50/50 mixture as soon as possible.

*[SV21000(ALL)01/95] Have your dealer check the engine coolingsystem for leaks if you have to add a quart(liter) of engine coolant more than once a month.

*[SV21200(ALL)05/95] Engine coolant drain and flush

*[SV21300(ALL)05/94] The proper procedures to completely drain andflush the engine cooling system can be found inthe Service Manual for your vehicle or you cansee your dealer. See the order form locatedbefore this chapter. Follow these recommendedprocedures to ensure that your vehicle has thespecified engine level and 50/50 mixture ofcooling system fluid and water.


227

[SV21450(ALL)05/95] Refilling the engine coolant — 2.0L engine

*[SV21500(ALL)03/95] When the entire engine cooling system is to bedrained and refilled, use the followingprocedure:

*[SV21600(ALL)01/89] 1. Remove the radiator cap.

*[SV21700(ALL)06/89] 2. With the engine off and cool, add a 50/50mixture of recommended engine coolingsystem fluid and water until the radiator isfull.

*[SV21800(ALL)07/93] 3. Replace and fully tighten the radiator cap,then unscrew the cap to the first stop.

*[SV21900(ALL)06/89] 4. Start and idle the engine until the radiatorupper hose is warm (this indicates thethermostat is open and engine coolant isflowing through the entire system).

[SV22000(ALL)04/95] 5. Shut the engine off and check the fluid levelin the radiator. Add more fluid if necessary.

[SV22005(ALL)03/94] 6. When the radiator is filled to the properlevel, replace the coolant system cap andtighten both caps completely.

[SV22010(ALL)01/92] Refilling the engine coolant — 2.5L engine

[SV22015(ALL)04/95] When the entire cooling system is to be drainedand refilled, use the following procedure:

[SV22020(ALL)04/93] 1. Locate the radiator breather cap and thecoolant system cap in your enginecompartment. The cap on your right(driver’s side) is the radiator breather cap.The cap on your left (passenger’s side) is thecoolant system cap.


228

[SV22025(ALL)04/95]

threefourthspageart:0032104-B

Location

ofcoolan

tsystem

caps

and

coolant

reservoir—

2.5Len

gine

[SV22028(ALL)02/92]

2.R

emove

therad

iatorbreather

capand

thecoolant

systemcap.

[SV22030(ALL)02/92]

3.W

iththe

engineoff

andcool,

add

a50/50

mixture

ofrecom

mend

edengine

coolantfluid

andw

aterto

therad

iator,using

thecoolant

systemcap

opening,until

therad

iatoris

full.Y

oushould

beable

tosee

thefluid

throughthe

radiator

breathercap

opening.

File:prsvp.exU

pdate:Fri Jun 23 19:33:26 1995

229

[SV22035(ALL)02/92] 4. Replace the radiator breather cap and thecoolant system cap and tighten to the firststop.

[SV22050(ALL)02/92] 5. Start and idle the engine until the radiatorupper hose is warm. The warm hoseindicates the thermostat is open and theengine coolant is flowing through the entiresystem.

[SV22060(ALL)02/92] 6. Shut the engine off and check the fluid levelin the radiator through the coolant systemcap opening. Add more fluid if necessary.

[SV22070(ALL)02/92] 7. When the radiator is filled to the properlevel, replace the coolant system cap andtighten both caps completely.

%*[SV22100(ALL)11/94] Checking hoses

*[SV22200(ALL)01/89] Check all engine and heater system hoses andhose connections for deterioration, leaks, andloose hose clamps as specified in themaintenance schedule. Repair or replace withMotorcraft hoses or equivalent as necessary.

%*[SV22300(ALL)03/95] Windshield Washer Fluid andWipers

*[SV22350(ALL)03/95] Washer Fluid

[SV22500(ALL)01/95] Check the level of the windshield washer fluidevery time you stop for fuel. The reservoir forthe windshield washer fluid is located in theengine compartment. Visual inspection candetermine if the washer fluid is adequate. Donot operate the washer when the reservoir isempty.


230

[SV22600(ALL)05/95]


Windshield washer fluid reservoir


Do not put windshield washer fluid in thecontainer for the engine coolant.

%*[SV23100(ALL)01/95] Use specially formulated windshield washerfluid rather than plain water, because speciallyformulated washer fluids contain additives thatdissolve road grime. For safety reasons, washerfluids containing an appropriate antifreeze suchas methanol should be used in freezing weather(temperatures below 32˚F [0˚C]). State or localregulations on Volatile Organic Compounds(VOC’s) may restrict use of the most commonantifreeze, methanol. Washer fluids containingnon-methanol antifreeze agents should be usedonly if they provide cold weather protectionwithout damaging the vehicle’s paint finish,wiper blades, and windshield washer system.


231

*[SV24000(ALL)03/95] Wiper blade maintenance

*[SV24100(ALL)03/95] Check the windshield wiper blades at least twicea year. Also check them whenever they seemless effective than usual. Such substances as treesap and some hot wax treatments used bycommercial car washes reduce the effectivenessof wiper blades.

*[SV24200(ALL)03/95] If the blades do not wipe properly, clean boththe windshield and the wiper blades. Useundiluted windshield washer solution or a milddetergent. Rinse thoroughly with clear water. Donot use fuel, kerosene, paint thinner, or othersolvents to clean your wiper blades. These willdamage your blades.

*[SV24300(ALL)02/95] To make reaching the wiper blades easy, simplyturn the ignition switch to ACC and turn yourwipers on. Wait for them to reach a verticalposition and turn the ignition to OFF. Do notmove the wipers manually. Moving the wipersmanually may damage them.

*[SV24400(ALL)03/01] Wiper blade replacement

*[SV24500(ALL)01/95] If the wipers still do not work properly afteryou clean them, you may need to replace thewiper blade assembly. When replacing the wiperblade assembly always use a Motorcraft part orequivalent.

*[SV24525(ALL)10/93] To replace the wiper blades:

*[SV24535(ALL)04/95] 1. Pull the wiper arm away from thewindshield and lock into the service position.

*[SV24550(ALL)03/94] 2. Turn the blade at an angle from the wiperarm. Push the lock pin with a screwdriver torelease the blade and pull the wiper bladedown toward the windshield to remove itfrom the arm.


232

*[SV24560(ALL)03/94] 3. Attach a new wiper blade to the wiper armand press it into place until you hear it click.

[SV24575(ALL)04/95]


Replacing the wiper blades

*[SV24600(ALL)03/95] Tires

*[SV24700(ALL)03/95] Look at your tires each time you fill your fueltank. If one tire looks lower than the others,check the pressure in all of them. Always followthese precautions:

*[SV24900(ALL)03/95] ❑Keep your tires inflated to the recommendedpressures.

*[SV25000(ALL)02/95] ❑Stay within the recommended load limits (seeLoad limits in the Index).


233

*[SV25100(ALL)02/95] ❑Make sure the weight of your load is evenlydistributed.

*[SV25200(ALL)10/89] ❑Drive at safe speeds.

*[SV25300(ALL)01/95] If you do not take these precautions, your tiresmay fail or go flat.

*[SV25390(ALL)06/95] Ford Motor Company recommends obeyingposted speed limits.


Driving too fast for conditions creates thepossibility of loss of vehicle control.Driving at very high speeds for extendedperiods of time may result in damage tovehicle components.

[SV25600(ALL)03/95] At least once a month, check the pressure in allyour vehicle’s tires, including the spare. Use anaccurate tire pressure gauge. Check the tirepressure when tires are cold, that is, after thevehicle has been parked for at least one hour orhas been driven less than 3 miles (5 km).

[SV25700(ALL)03/94] You can find your vehicle’s proper tire inflationpressure on the tire decal on the right door lockpillar.


Improperly inflated tires can affect vehiclehandling and can fail suddenly, possiblyresulting in loss of vehicle control.

%*[SV25875(ALL)02/95] Tire inspection and maintenance

*[SV25880(ALL)02/95] Inspect the tire treads, and remove stones, nails,glass or other objects that may be wedged in thetread grooves. Check for holes or cuts that maypermit air to leak from the tire, and make thenecessary repairs.


234

*[SV25890(ALL)05/95] Inspect the tire sidewalls for cuts, bruises andother damage. If you suspect internal damage tothe tire, have it removed and checked. You mayneed to repair or replace it.

%*[SV25900(ALL)02/95] Tire Rotation

*[SV26000(ALL)04/95] Because your vehicle’s front and rear tiresperform different jobs, they often weardifferently. To make sure your tires wear evenlyand last longer, rotate them as indicated in thefollowing diagram.

*[SV26100(ALL)04/95] Do not include the spare tire as part of yourrotation.

*[SV26150(ALL)03/95] For tire rotation intervals, see the MaintenanceSchedule and Record booklet. If you notice thetires wearing unevenly, have them checked.

[SV26202(ALL)11/91]


Rotating the tires

%*[SV26400(ALL)04/95] Replacing the Tires

[SV26500(ALL)05/95] We recommend that you use the same size andtype when making tire replacements. Thestandard model uses P195/65 R14 tires, and theGT model is equipped with P225/50VR16 tires.If your standard model vehicle is equipped witha 3-spoke aluminum wheel, you will needP205/55H R15 tires.


235

*[SV26700(ALL)05/95] Replace any tires that show wear bands. Whenyour tire shows a wear band, it has only 1/16inch (2 mm) of tread left.

*[SV26800(ALL)09/89]


A worn-out tire

*[SV26900(ALL)01/95] Because your vehicle’s tires may wear unevenly,you may need to replace them before a wearband appears across the entire tread. Some spotswear more heavily than others.


When replacing full size tires, never mixradial, bias-belted, or bias-type tires. Useonly the tire sizes that are listed on thetire pressure decal. Make sure that all tiresare the same size, speed rating, andload-carrying capacity. Use only the tirecombinations recommended on the decal.If you do not follow these precautions,your vehicle may not drive properly andsafely.

*[SV27100(ALL)01/95] Tires that are larger or smaller than yourvehicle’s original tires may also affect theaccuracy of your speedometer.

*[SV27200(ALL)04/95] Wheel and Tire Matching

*[SV27250(ALL)03/95] See an authorized tire dealer for properservicing procedures. Wheels and tires must beproperly removed, matched and remounted tomaintain the best possible ride.


236

%*[SV28100(ALL)02/95] Information About Tire Quality Grades

*[SV28200(ALL)01/95] New vehicles are fitted with tires that have theirTire Quality Grade (described below) moldedinto the tire’s sidewall. These Tire QualityGrades are determined by standards that theUnited States Department of Transportation hasset.

*[SV28250(ALL)01/95] Tire Quality Grades apply to new pneumatictires for use on passenger cars. They do notapply to deep tread, winter-type snow tires,space-saver or temporary use spare tires, tireswith nominal rim diameters of 10 to 12 inches orlimited production tires as defined in Title 49Code of Federal Regulations Part 575.104(c)(2).

*[SV28300(ALL)01/95] U.S. Department of Transportation — Tirequality grades: The U.S. Department ofTransportation requires Ford to give you thefollowing information about tire grades exactlyas the government has written it.

%*[SV28399(ALL)01/95] Treadwear

*[SV28400(ALL)01/95] The treadwear grade is a comparative ratingbased on the wear rate of the tire when testedunder controlled conditions on a specifiedgovernment test course. For example, a tiregraded 150 would wear one and one-half (1 1/2)times as well on the government course as a tiregraded 100. The relative performance of tiresdepends upon the actual conditions of their use,however, and may depart significantly from thenorm due to variations in driving habits, servicepractices and differences in road characteristicsand climate.


237

*[SV28499(ALL)01/95] Traction A B C

*[SV28500(ALL)01/95] The traction grades, from highest to lowest, areA, B, and C, and they represent the tire’s abilityto stop on wet pavement as measured undercontrolled conditions on specified governmenttest surfaces of asphalt and concrete. A tiremarked C may have poor traction performance.Warning: The traction grade assigned to this tireis based on braking (straightahead) traction testsand does not include cornering (turning)traction.

*[SV28699(ALL)01/95] Temperature A B C

*[SV28700(ALL)01/95] The temperature grades are A (the highest), B,and C, representing the tire’s resistance to thegeneration of heat and its ability to dissipateheat when tested under controlled conditions ona specified indoor laboratory test wheel.Sustained high temperature can cause thematerial of the tire to degenerate and reduce tirelife, and excessive temperature can lead tosudden tire failure. The grade C corresponds toa level of performance which all passenger cartires must meet under the Federal Motor VehicleSafety Standard No. 109. Grades B and Arepresent higher levels of performance on thelaboratory test wheel than the minimumrequired by law. Warning: The temperaturegrade for this tire is established for a tire that isproperly inflated and not overloaded. Excessivespeed, underinflation, or excessive loading, eitherseparately or in combination, can cause heatbuildup and possible tire failure.


238

*[SV28750(ALL)02/95] Snow tires

*[SV28770(ALL)06/93] During the winter months in some climates, youmay need to use snow tires and occasionallychains for your tires.


Snow tires must be the same size andgrade as the tires you currently have onyour vehicle.

*[SV28810(ALL)02/95] Use chains on the tires only in an emergency orif the law requires them where you live. If youchoose to use chains on your vehicle’s tires, beaware of the following:

*[SV28820(ALL)11/94] ❑Tire chains may scratch or chip aluminumwheels. IT IS RECOMMENDED THAT TIRECHAINS ARE INSTALLED ON STEELWHEELS ONLY. Be sure to remove wheelcovers (if equipped) from steel rims beforeusing tire chains to avoid scratches ordamage.

*[SV28830(ALL)06/93] ❑Do not use tire chains if you have the GTmodel.

*[SV28840(ALL)11/94] ❑Local regulations may prohibit or restrict theuse of tire chains. Investigate the laws andregulations in your area before installingchains.

*[SV28860(ALL)05/95] ❑Put the chains on the front tires tightly withthe ends held down securely. Retighten thechains after driving 1/2 mile (1 km). Followthe chain manufacturer’s instructions.

*[SV28870(ALL)05/95] ❑Do not drive faster than 30 mph (50 km/h)or the chain manufacturer’s recommendedspeed limit, whichever is lower. Avoidbumps, holes and sharp turns. If you canhear the chains rub or bang against yourvehicle, remove the chains to prevent damageto your vehicle.


239

*[SV28880(ALL)11/94] ❑Tire chains may affect vehicle handling. Drivecarefully and avoid hard braking.

*[SV28890(ALL)11/94] ❑Do not use chains on temporary spare tires.They may damage the vehicle and the tire.

*[SV29025(ALL)05/94] ❑Remove tire chains at the first opportunityafter using them on snow and ice. Do not usethe chains on dry roads.

%*[SV29100(ALL)04/95] Cleaning the Wheels

*[SV29150(ALL)05/95] Wash the wheels with the same detergent youuse to wash your vehicle’s body. Do not useacid-based wheel cleaners, steel wool, abrasives,fuel, or strong detergents. These substances willdamage protective coatings. Use tar and road oilremover to remove grease and tar.

*[SV29175(ALL)04/95] NOTE: Before going to a car wash, find out ifthe brushes are abrasive.

*[SV29200(ALL)04/95] If you have whitewall tires that are difficult toclean with regular detergent, use whitewall tirecleaner. Follow the directions on the containerand rinse the tires with plenty of clean water.

*[SV29610(ALL)05/95] Battery

*[SV29612(ALL)02/95] The Motorcraft maintenance-free battery doesnot require additional water during its life ofservice. The vents are part of the cover andcannot be removed. For longer, trouble-freeoperation, keep the top of the battery clean anddry. Also, make certain the battery cables aretightly fastened to the battery terminals.

*[SV29614(ALL)02/95] If you see any corrosion on the battery cables orterminals, remove the cables from the terminaland clean them both with a wire brush. You canneutralize the acid with a solution of baking


240

soda and water. Reinstall the cables when youare done cleaning them, and apply a smallquantity of grease to the top of each batteryterminal to help prevent corrosion.

*[SV29616(ALL)02/95] Battery replacement

[SV29620(ALL)11/91] When the original equipment maintenance-freebattery is replaced under warranty, it may bereplaced by a low-maintenance battery.

[SV29625(ALL)03/95] The low-maintenance battery has removable ventcaps for checking the electrolyte level andadding water, if necessary.

[SV29630(ALL)04/93] The electrolyte level should be checked at leastevery 24 months or 24,000 miles (40,000 km) intemperatures up to 90˚F (32˚C) and more intemperatures above 90˚F (32˚C). Keep theelectrolyte level in each cell up to the levelindicator. Do not overfill.

[SV29635(ALL)03/95] If the level gets low, you can add plain tapwater to the battery, provided the water isn’thard or doesn’t have a high mineral or alkalicontent. However, if possible, refill with distilledwater. If the battery needs water quite often,have the charging system checked for a possibleproblem.

[SV29636(ALL)01/95] If you ever disconnect the battery or install anew battery, you must allow the computer to“relearn” its idle condition before your vehiclewill drive properly. To begin this process, putthe gearshift in P (Park) (automatic transaxle) orN (Neutral) (manual transaxle), set theemergency brake, turn off all the accessories, andstart the vehicle. Bring the engine to normaloperating temperature.


241

*[SV29637(ALL)03/95] If you do not let the engine relearn its idle, theidle quality of your vehicle may be adverselyaffected until the idle is relearned. Your vehiclewill eventually relearn its idle while you driveit, but it takes much longer than if you use theprevious procedure.

*[SV29640(ALL)03/95] Help Us Protect Our Environment

*[SV29645(ALL)04/95] Ford Motor Company strongly recommends thatused lead-acid batteries be returned to anauthorized recycling facility for disposal.

*[SV29650(ALL)03/95]


Battery recycling symbol


The gases around the battery can explodeif exposed to flames, sparks, or litcigarettes. An explosion could result ininjury or vehicle damage.


To protect yourself when charging abattery, always shield your face and eyes.Make sure that you can breathe fresh air.


Batteries contain sulfuric acid which burnsskin, eyes, and clothing.


242

*[SV29675(ALL)06/95] If the acid touches someone’s skin, eyes, orclothing, immediately flush the area with waterfor at least 15 minutes. If someone swallows theacid, have him or her drink lots of milk or waterfirst, then Milk of Magnesia, a beaten egg, orvegetable oil. Call a doctor immediately.


Applying too much pressure on the endswhen lifting a battery could cause acid tospill. Lift the battery with a carrier orwith your hands on the opposite corners.

*[SV29700(ALL)03/01] Automatic Transaxle Fluid

*[SV29800(ALL)03/95] Under normal circumstances, you do not need tocheck the fluid level of the transaxle, since yourvehicle does not use up transaxle fluid. Refer tothe Maintenance Schedule and Record booklet forreplacement intervals. However, if the transaxleis not working properly — for instance, thetransaxle may slip or shift slowly, or you maynotice some sign of fluid leakage — the fluidlevel should be checked.

[SV29900(ALL)01/94] If you must check the transaxle fluid in anemergency, make sure that your vehicle is onlevel ground, start the engine, and move thegearshift through all of the gears allowingsufficient time for each position to engage.Securely latch the gearshift in P (Park). Set theparking brake and leave the engine running.

[SV29950(ALL)04/93] Wipe off the dipstick cap, pull the dipstick outand wipe the indicator end clean. Put thedipstick back into the filler tube. Make sure thedipstick is fully seated in the filler tube;otherwise, you will not get an accurate reading.Pull the dipstick out and read the fluid level.


243

[SV30000(ALL)01/92] The fluid level must be above the lower mark. Ifit is not, you should not drive your vehicle untilmore fluid is added. Ideally, the fluid levelshould be within the specified area of thedipstick.

[SV30100(ALL)03/90] NOTE: The fluid level indication on thedipstick will be different at operatingtemperature and room temperature. Forthe correct fluid level reading on thedipstick, follow the appropriateinstructions.

[SV30200(ALL)01/94] At normal operating temperature (approximately20 miles [32 km] of vehicle operation), the levelon the dipstick should be within the specifiedarea on the “Safe level when hot” temperaturescale. At room temperature, the level should bewithin the specified area on the “Safe level whencold” temperature scale. If your vehicle has notbeen operated for some time and outsidetemperature is below 50˚F (10˚C) the fluid mustbe warmed by running the engine.

[SV30300(ALL)05/93]


Automatic transaxle fluid dipstick on 2.5L engine vehicles


244

[SV30350(ALL)06/93]


Automatic transaxle fluid dipstick on 2.0L engine vehicles

*[SV30400(ALL)03/95] If you must add transaxle fluid in an emergency,use only MERCONH fluid, such as MotorcraftMERCONH Multi-Purpose ATF. Add the fluid in1/2-pint increments until you raise the fluidlevel to within the crosshatched area on thedipstick. Never overfill the transaxle. If the fluidlevel gets too high, remove the excess fluid assoon as possible; otherwise, you could damagethe transaxle.

*[SV30500(ALL)01/89] Manual Transaxle Fluid

*[SV30600(ALL)08/91] The lubricant level and quality should notdeteriorate under normal use. However, youshould periodically have your Ford Dealer checkthe fluid level during regular oil changes.



245

[SV31400(ALL)02/95] Constant Velocity Joints

[SV31500(ALL)02/95] Inspect all rubber boots for signs of cracks, tears,or splits. Inspect underneath of your car for anyindication of grease splatter in the areas ofconstant velocity joint boots, outboard andinboard locations; grease splatter is an indicationof boot and/or clamp damage.

*[SV31600(ALL)02/95] Brake Fluid

*[SV31700(ALL)03/95] Under normal circumstances, your vehicleshould not use up brake fluid rapidly. However,expect the level of the brake fluid to slowly fallas you put more mileage on your vehicle andthe brake pads wear.

[SV31800(ALL)04/93] Check the brake fluid at least once a year. Youcan do this by looking at the fluid level in theplastic reservoir on the master cylinder. (See TheEngine Types earlier in this chapter to locate themaster cylinder.) The fluid level should be at ornear the MAX mark.


Brake fluid is toxic.

*[SV31860(ALL)06/95] If brake fluid contacts eyes, flush eyes withrunning water for 15 minutes. Get medicalattention if irritation persists. If taken internally,drink water and induce vomiting. Get medicalattention immediately.


246

[SV32000(ALL)08/91]


Brake fluid level

[SV32100(ALL)01/95] If the fluid is low, carefully clean and removethe cap from the reservoir. Fill the reservoir tothe MAX line with Ford High Performance DOT3 Brake Fluid C6AZ-19542-AA or DOT 3equivalent fluid meeting Ford specificationESA-M6C25-A.


If you use a brake fluid that is not DOT3, you will cause permanent damage toyour brakes.

*[SV32500(ALL)01/95] Do not fill the reservoir above the MAX line.

*[SV32600(ALL)01/95] If you find that the fluid level is excessively low— below the seam or ridge on the outside of theplastic reservoir — have the brake systeminspected.


Do not let the reservoir for the mastercylinder run dry. This may cause thebrakes to fail.


247

*[SV32800(ALL)03/95] Power Steering Fluid

*[SV32900(ALL)01/95] Check the level of the power steering fluid atleast twice a year (i.e., every Spring and Fall).

*[SV33000(ALL)03/95] Checking and Adding Power SteeringFluid

*[SV33100(ALL)02/95] 1. Start the engine and let it run until thepower steering fluid reaches normaloperating temperature. The power steeringfluid will be at the right temperature whenthe engine coolant temperature gauge in theinstrument cluster is near the center of theNORMAL operating temperature range.

*[SV33200(ALL)01/95] 2. While the engine idles, turn the steeringwheel back and forth several times. Makesure that the cap assembly is installed at thistime.

*[SV33300(ALL)01/95] 3. Turn the engine off and check the level onthe power steering reservoir.

[SV33550(ALL)08/91]


Where to check for power steering fluid


248

[SV33610(ALL)01/94] 4. Remove the dipstick to read the powersteering fluid level. If the power steeringfluid is low, add fluid in small amounts,continuously checking the level, until youreach the HIGH line. Do not overfill. To findout how much fluid your vehicle’s powersteering fluid reservoir will hold, see Refillcapacities for fluids in the Index.

[SV33700(ALL)01/95] 5. When you are finished, put the dipstick backin and make sure that it fits snugly.

*[SV34000(ALL)01/95] If the power steering fluid is low, do not driveyour vehicle for a long period of time beforeadding fluid. This can damage the powersteering pump.

*[SV34200(ALL)01/94] If you must check the power steering fluidbefore it reaches normal operating temperature,make sure that the fluid reaches the “L” (orLOW) line range in the reservoir. The readingwill only be accurate if the fluid temperature isapproximately 70˚ to 100˚F (21˚ to 38˚C).

[SV34210(ALL)11/91] Air Conditioning Refrigerant

[SV34215(ALL)04/93] Whenever service to the air conditioning systemis required, make sure the service facility uses arefrigerant recycling system. These systems willcapture the refrigerant for reuse. Releasingcertain refrigerants into the atmosphere candamage our environment.

*[SV34225(ALL)02/93] Fuses

[SV34250(ALL)05/95] If electrical parts in your vehicle are notworking, the system may have been overloadedand blown a fuse. If a fuse blows, all the partsof your vehicle that use the fuse will not work.

[SV35550(ALL)03/94] Your vehicle has two fuse panels. The interiorfuse panel is below the instrument panel in frontof the driver’s door. The main panel is underthe hood behind the battery.


249

[SV35700(ALL)08/91]


Fuse panel under instrument panel

[SV35750(ALL)04/93]


Inside of the instrument fuse panel cover


250

[SV35760(ALL)05/95]

thirty-six pica chart:0032186-B


251

[SV35800(ALL)08/91]


Fuse panel located under hood

[SV35850(ALL)06/93]


Fuse panel cover located under the hood


252

[SV35900(ALL)05/95]

thirty-six pica chart:0032188-D


253

[SV35950(ALL)05/95]

thirty-six pica chart:0032189-D


254

[SV36000(ALL)05/95]

thirty-two pica chart:0032190-D


255

[SV36200(ALL)05/95] To remove and replace a fuse, use the fusepuller provided.

*[SV37100(ALL)05/95]


Fuse puller tool and fuse


Always replace a fuse with one that hasthe specified amperage rating. Using afuse with a higher amperage rating cancause severe wire damage and could starta fire.

[SV37425(ALL)05/95] To find a fuse’s amperage rating, check thenumber on the fuse or check the color.

[SV37475(ALL)05/95]

twelve pica chart:0032119-A

*[SV37500(ALL)05/93] Even after you replace a fuse, it will continue toblow if you do not find what caused theoverload. If the fuse continues to blow, haveyour electrical system checked.


256

*[SV38800(ALL)03/95] Lights and Bulb Replacement

*[SV38900(ALL)01/95] It is a good idea to check the operation of thefollowing lights frequently:

*[SV39000(ALL)01/95] ❑headlamps

[SV39050(ALL)05/95] ❑high-mount brakelamp

*[SV39100(ALL)01/95] ❑ tail lamps

*[SV39200(ALL)01/95] ❑brakelamps

*[SV39300(ALL)01/95] ❑hazard flasher

*[SV39400(ALL)01/95] ❑ turn signals

*[SV39500(ALL)01/95] ❑ side markers

*[SV39600(ALL)01/95] ❑ license plate lamp

[SV39700(ALL)01/89] ❑ fog lamps (GT model)

%*[SV39800(ALL)01/95] The alignment of your headlamps should bechecked if:

*[SV39900(ALL)01/95] ❑oncoming motorists frequently signal you toturn off your vehicle’s high beams when youdo not have the high beams on

*[SV40000(ALL)01/95] ❑ the headlamps do not seem to give youenough light to see clearly at night

*[SV40100(ALL)01/95] ❑ the headlamp beams are pointed substantiallyaway from a position slightly down and tothe right

*[SV40200(ALL)03/95] Headlamp Bulb

[SV40300(ALL)03/94] Your vehicle has retractable halogen headlamps.If you need to replace a headlamp, have it doneby a Ford service technician.


257

[SV42000(ALL)01/95] High-Mount Brakelamp Bulb

[SV42050(ALL)02/89] To replace the bulb:

[SV42200(ALL)02/92] 1. Remove the two side trim liftgate panels.

[SV42300(ALL)02/92] 2. Remove the liftgate trim clip and the liftgatetrim.

[SV42400(ALL)02/92] 3. Remove the bulb from the socket by pushingit in and turning it counterclockwise.

[SV42500(ALL)02/92] 4. Install the bulb by pushing straight into thelamp socket and turning it clockwise until itlocks in place.

[SV42600(ALL)02/92] 5. Replace the liftgate trim and trim clip.

[SV42700(ALL)02/92] 6. Replace the two side trim liftgate panels.

[SV42800(ALL)04/93]


High-mount brakelamp


258

[SV42900(ALL)01/95] Rear Lamp Bulbs

[SV43000(ALL)04/93] To replace a bulb:

[SV43100(ALL)04/93] 1. Remove the attaching screw and the rearlens cover.

[SV43200(ALL)04/93]


Removing the attaching screw and lens

[SV43300(ALL)04/93] 2. Partially remove the rear lens by pulling thelock tabs out of the slots.


259

[SV43400(ALL)03/94]


Pulling out the lock tabs

[SV43500(ALL)04/93] 3. Turn the socket counterclockwise to removeit from the lens.

[SV43600(ALL)04/93] 4. Remove the bulb from the socket by pushingit in and turning it counterclockwise.


260

[SV43700(ALL)04/93]


The rear lamps

[SV43800(ALL)04/93] 5. Install the bulb by pushing it into the socketand turning it clockwise.

[SV43900(ALL)04/93] 6. Install the socket by pushing it into itshousing and turning it clockwise. The arrowon the socket must align with the arrow onthe housing when installed.

[SV44000(ALL)04/93] 7. Replace the rear lens and rear lens cover.


261

*[SV47200(ALL)03/95] Bulb Specifications

[SV47300(ALL)05/93]

sixteen pica chart:0030275-G

*[SV47600(ALL)03/95] Emission Control System

*[SV47700(ALL)05/95] Your vehicle is equipped with a catalyticconverter which enables your vehicle to complywith applicable exhaust emission requirements.


Exhaust leaks may result in the entry ofharmful and potentially lethal fumes intothe passenger compartment. Underextreme conditions excessive exhausttemperatures could damage the fuelsystem, the interior floor covering, orother vehicle components, possiblycausing a fire.


262

*[SV47800(ALL)05/95] To make sure that the catalytic converter and theother emission control parts continue to workproperly:

*[SV47900(ALL)01/95] ❑Use only unleaded fuel.

*[SV48000(ALL)01/95] ❑Avoid running out of fuel.

*[SV48100(ALL)01/95] ❑Do not turn off the ignition while yourvehicle is moving, especially at high speeds.

*[SV48150(ALL)01/95] ❑Do not push start your vehicle.

*[SV48200(ALL)03/95] ❑Have the services listed in your MaintenanceSchedule and Record booklet performedaccording to the specified schedule.


Do not park, idle, or drive your vehicle indry grass or other dry ground cover. Theemission system heats up the enginecompartment and exhaust system, whichcan start a fire.

*[SV48400(ALL)05/95] Watch for fluid leaks, strange odors, smoke, lossof oil pressure, the charge warning light, thecheck engine light, or the temperature warninglight. These sometimes indicate that the emissionsystem is not working properly.

*[SV48500(ALL)01/95] Do not make any unauthorized changes to yourvehicle or engine. Changes that cause moreunburned fuel to reach the exhaust system canincrease the temperature of the engine orexhaust system.

%*[SV48550(ALL)05/95] In general, maintenance, replacement, or serviceof the emission control devices or systems inyour new Ford Motor Company vehicle orengine may be performed at your expense byany automotive repair establishment orindividual using automotive parts equivalent tothose with which your vehicle or engine was


263

originally equipped. If other than Ford orMotorcraft or Ford authorized remanufacturedparts are used for maintenance, replacement, orfor the service of components affecting emissioncontrol, the owner should be assured that suchparts are warranted by their manufacturer to beequivalent to genuine Ford Motor Companyparts in performance and durability. Pleaseconsult your warranty information booklet forcomplete warranty information.

*[SV48600(ALL)01/95] By law, anyone who manufactures, repairs,services, sells, leases, trades vehicles, orsupervises a fleet of vehicles is not permitted tointentionally remove an emission control deviceor prevent it from working. In some of theUnited States and in Canada, vehicle ownersmay be liable if their emission control device isremoved or is prevented from working.

*[SV48700(ALL)02/92] Never use a metal exhaust collector when youservice your vehicle. If the metal collectorcontacts any of your vehicle’s plastic trim orbumper parts they could melt or deform.

*[SV48800(ALL)01/95] Do not drive your vehicle if it does not operateproperly. See your dealer if the engine runs onfor more than five seconds after you shut it offor if it misfires, surges, stalls, or backfires.

%*[SV48810(ALL)05/95] Information about your vehicle’s emissioncontrol system is on the Vehicle EmissionControl Information decal located on or near theengine. This decal identifies engine displacementand gives some tune-up specifications.


264

%*[SV48820(ALL)06/95] Readiness for Inspection/MaintenanceTesting

*[SV48830(ALL)06/95] In some localities it may become a legalrequirement to pass anInspection/Maintenance (I/M) test of theOn-Board Diagnostic (OBD) II system. If thevehicle’s powertrain system or its battery hasjust been serviced, the OBD II system is reset toa not ready for I/M testing condition. Toprepare for I/M testing, the law specifies a“need for additional mixed city and highwaydriving to complete the check” of the OBD IIsystem. As soon as all of the OBD II systemchecks are successfully completed, the OBD IIsystem is set to the ready condition. The amountof driving required to reach the ready conditionvaries with individual driving patterns. Tocomplete this requirement in the minimumamount of time, refer to the OBD II Drive Cycledefined below. If the vehicle owner cannot ordoes not want to do the additional drivingrequired by law, a service center can performthis drive cycle as it would any other type ofrepair work.

*[SV48840(ALL)06/95] OBD II Drive Cycle

*[SV48845(ALL)06/95] The following steps must be run in the ordershown. If any steps are interrupted, repeat thepreceding step. Any safe driving mode isacceptable between steps.

*[SV48850(ALL)06/95] Always drive vehicle in safe manner accordingto traffic conditions and obey all traffic laws.


265

*[SV48860(ALL)06/95] The engine must be warmed up and atoperating temperature before proceeding withthe drive modes of the following OBD II DriveCycle.

*[SV48870(ALL)06/95] 1. Start the engine. Drive or idle (in neutral)the vehicle for 4 minutes.

[SV48880(ALL)05/95] 2. Idle the vehicle in drive (neutral forautomatic transaxles) for 40 seconds.

[SV48890(ALL)05/95] 3. Accelerate the vehicle to 45 mph (72 km/h)(for manual transaxles upshift from 1st to5th gear, but hold in 2nd for at least 5seconds) at 1/4 to 1/2 throttle for 10seconds.

[SV48895(ALL)05/95] 4. Drive the vehicle with a steady throttle at45 mph (72 km/h) (manual transaxles use5th gear) for 30 seconds.

[SV48900(ALL)05/95] 5. Idle the vehicle in drive (neutral for manualtransaxles) for 40 seconds.

[SV48910(ALL)05/95] 6. Continue to drive the vehicle in city traffic atspeeds between 25 and 40 mph(40-64 km/h) (manual transaxles primarilydrive vehicles in 3rd and 4th gear whenpossible) for 15 minutes. During the 15minute drive cycle the following modes mustbe achieved:

*[SV48920(ALL)06/95] a. at least 5 stop and idle modes at 10seconds each

*[SV48930(ALL)06/95] b. acceleration from idles at 1/4 to 1/2throttle position, and

*[SV48940(ALL)06/95] c. choose 3 different speeds to do 1.5minute steady state throttle drives.

[SV48950(ALL)05/95] 7. Accelerate the vehicle up to between 45 and60 mph (72-97 km/h) (manual transaxlesupshift to 5th gear). This should takeapproximately 5 minutes.


266

[SV48960(ALL)05/95] 8. Drive vehicle and hold the throttle steady atthe selected speed between 45 and 60 mph(72-97 km/h) (manual transaxles use 5thgear) for approximately 5 minutes.

[SV48970(ALL)05/95] 9. Drive the vehicle for 5 minutes at varyingspeeds between 45 and 60 mph(72-97 km/h) (manual transaxles use 5thgear).

[SV48980(ALL)05/95] 10. Bring the vehicle back to idle. Idle in drive(manual transaxles use 5th gear) for 40seconds.

[SV48990(ALL)05/95] 11. OBD drive cycle has been completed. Vehiclecan be turned off when convenient.


267

*[SV49000(ALL)03/95]

Refill

Cap

acities,M

otorcraftP

arts,an

dL

ub

ricant

Sp

ecifications

*[SV49100(ALL)01/89]

Refill

Cap

acities(A

pp

roximate)

[SV49200(ALL)06/94]

thirty-twopicachart:0030283-K

File:prsvp.exU

pdate:Fri Jun 23 19:33:26 1995

268

*[SV49500(ALL)05/95] Motorcraft Parts

[SV49600(ALL)03/94]

fourteen pica chart:0032103-F

*[SV49900(ALL)01/89] Lubrication Specifications

*[SV50000(ALL)07/93] The transaxle and steering systems in yourvehicle are filled at the factory with high-quality,long-lasting lubricants or fluids that do notrequire periodic draining or refilling exceptunder severe-duty conditions. However, whenrefilling or adding is required, it should be withthe proper lubricant or fluid meeting Fordtechnical specifications. See the MaintenanceSchedule and Record booklet for instructions onmaintaining proper fluid levels.


269

*[SV50025(ALL)03/95]

Lu

brican

tS

pecifica

tion

Ch

arts

[SV50100(ALL)04/95]

thirty-twopicachart:0030289-M

File:prsvp.exU

pdate:Fri Jun 23 19:33:26 1995

270

[SV50200(ALL)05/95]

thirty-sixpicachart:0030290-N

File:prsvp.exU

pdate:Fri Jun 23 19:33:26 1995

271

*[SV50700(ALL)01/95] Vehicle Storage

*[SV50800(ALL)01/95] Maintenance Tips

*[SV50900(ALL)01/95] If you plan on storing your vehicle for anextended period of time (60 days or more), referto the following maintenance recommendationsto ensure your vehicle stays in good operatingcondition.

*[SV51000(ALL)01/95] General

*[SV51100(ALL)01/95] ❑Store all vehicles in a dry, ventilated place.

*[SV51200(ALL)01/95] ❑Protect from sunlight, if possible.

*[SV51300(ALL)01/95] ❑ If vehicles are stored outside, they requireregular maintenance to protect against rustand damage.

*[SV51400(ALL)01/95] Body

*[SV51500(ALL)01/95] ❑Wash vehicle thoroughly to remove dirt,grease, oil, tar or mud from exterior surfaces,rear wheel housing and underside of frontfenders.

*[SV51600(ALL)01/95] ❑Periodically wash vehicles stored in exposedlocations.

*[SV51700(ALL)01/95] ❑Touch-up raw or primed metal to preventrust.

*[SV51800(ALL)01/95] ❑Cover chrome and stainless steel parts with athick coat of auto wax to preventdiscoloration. Re-wax as necessary when thevehicle is washed.

*[SV51900(ALL)04/95] ❑Lubricate all hood, door and trunk lid hingesand latches with a light grade oil.

*[SV52000(ALL)01/95] ❑Cover interior soft trim to prevent fading.

*[SV52100(ALL)01/95] ❑Keep all rubber parts free from oil andsolvents.


272

%*[SV52200(ALL)01/95] Engine

*[SV52300(ALL)01/95] ❑Start engine every 15 days. Run at fast idleuntil it reaches normal operating temperature.

*[SV52400(ALL)01/95] ❑With your foot on the brake, shift through allthe gears while the engine is running.

%*[SV52500(ALL)01/95] Fuel system

%*[SV52600(ALL)07/94] ❑Fill fuel tank with high-quality unleaded fueluntil the first automatic shutoff of the fuelpump nozzle.

*[SV52800(ALL)03/95] NOTE: During extended periods of vehiclestorage (60 days or more), fuel maydeteriorate due to oxidation. This candamage rubber and other polymers inthe fuel system and may also clogsmall orifices.

*[SV52900(ALL)01/95] Ford Gas Stabilizer should be added wheneveractual or expected storage periods exceed 60days. Follow the instructions on the label. Thevehicle should then be operated at idle speed tocirculate the additive throughout the fuel system.

*[SV53000(ALL)01/95] A volatile corrosion inhibitor added to the fuelsystem will protect the fuel system’s innersurfaces from corrosion. Follow the instructionspackaged with the product.

%*[SV53100(ALL)01/95] Cooling system

*[SV53200(ALL)01/95] ❑Protect against freezing temperatures.

%*[SV53300(ALL)01/95] Battery

*[SV53400(ALL)01/95] ❑Check and recharge as necessary.

*[SV53500(ALL)01/95] ❑Keep connections clean and covered with alight coat of grease.


273

%*[SV53600(ALL)01/95] Brakes

*[SV53700(ALL)01/95] ❑Make sure brakes and parking brake are fullyreleased.

%*[SV53800(ALL)01/95] Tires

*[SV53900(ALL)05/95] ❑Maintain recommended air pressure.

*[SV54000(ALL)01/95] Miscellaneous

*[SV54100(ALL)01/95] ❑Make sure all linkages, cables, levers andclevis pins under vehicle are covered withgrease to prevent rust.

*[SV54200(ALL)05/95] ❑Move vehicles at least 25 feet (10 m) every 15days to lubricate working parts to preventcorrosion.


274

*[SV99900(ALL)05/95]

thirty-six pica chart:FORDADPLN


281

[QI01000(ALL)05/95]


File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

282

[QI02000(ALL)05/95]


Front

Exterior

View

—G

Tm

odel

File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

283

[QI02100(ALL)05/95]

fullpageart:0032129-F

Rear

Exterior

View

—stan

dard

mod

el

File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

284

[QI02200(ALL)05/95]


En

trance

View

File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

285

[QI02300(ALL)05/95]


Driver’s

Door

File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

286

[QI02400(ALL)05/95]

fullpageart:0032368-D

Instru

men

tP

anel

File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

287

[QI02500(ALL)05/95]

fullpageart:0032133-F

Instru

men

tC

luster

File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

288

[QI02600(ALL)05/95]


Hatch

back

File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

289

[QI02700(ALL)05/95]


2.0LE

ngin

eC

omp

artmen

t

File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

290

[QI02800(ALL)05/95]


2.5LE

ngin

eC

omp

artmen

t

File:prqip.exU

pdate:Fri Jun 23 19:31:05 1995

Index 291

Index

A

ABS warning light(see Anti-lock brake system) . . . . . . . 57

Additives, engine oil . . . . . . . . . . 218Air bag supplemental

restraint system. . . . . . . . . . . 17, 25and child safety seats . . . . . . . 17, 24–25description . . . . . . . . . . . . . . . 18disposal . . . . . . . . . . . . . . . . 22driver air bag . . . . . . . . . . . . . 18indicator light . . . . . . . . . . . . . 55operation . . . . . . . . . . . . . . . 18passenger air bag . . . . . . . . . . . . 18proper seating . . . . . . . . . . . . . 16tone generator . . . . . . . . . . . . . 22wearing safety belts . . . . . . . . . . . 15

Air cleaner filter, specifications . . . . . . 268Air conditioning, electronic automatic

temperature control system . . . . . . . 65Alcohol, in fuel . . . . . . . . . . . . . 214Aluminum wheels. . . . . . . . . . . . 238Antenna, radio

(see Electronic sound system) . 75, 121, 143Antifreeze (see Engine coolant) . . . . . . 221Antifreeze (see Engine coolant) . . . . . . 221Anti-lock brake system (ABS)

description . . . . . . . . . . . . . . 157see also Brake . . . . . . . . . . . . 157warning light. . . . . . . . . . . . . . 57

Appeals (see Dispute settlement board) . . 188Assistance (see Customer assistance) . . . 185Audio system

(see Electronic sound system) . . . . . 121

File:prixp.exUpdate:Fri Jun 23 19:30:26 1995

292 Index

Automatic transaxledriving with . . . . . . . . . . . . . 147fluid, adding . . . . . . . . . . . . . 242fluid, checking . . . . . . . . . . . . 242

BBacking up . . . . . . . . . . . . . 149, 155Basic vehicle warranty . . . . . . . . . . . 4Battery . . . . . . . . . . . . . . . . . 239

acid, treating emergencies . . . . . 169, 241disconnecting . . . . . . . . . . . . . 173how to service . . . . . . . . . . . . 239jumping a disabled battery . . . . . . . 169maintenance-free . . . . . . . . . . . 239proper disposal, recycling . . . . . . . 241replacement, specifications . . . . . . . 268servicing . . . . . . . . . . . . . . . 239when storing your vehicle . . . . . . . 272

Brake fluidbrake warning light . . . . . . . . . . . 55checking and adding . . . . . . . . . 245description . . . . . . . . . . . . . . 245

Brakesadjustment . . . . . . . . . . . . . . 157anti-lock . . . . . . . . . . . . . . . 157anti-lock brake system (ABS)

warning light. . . . . . . . . . . . . 57applying the brakes . . . . . . . . . . 157brake warning light . . . . . . . . . . . 55fluid, checking and adding. . . . . . . 245front disc. . . . . . . . . . . . . . . 157new brake linings . . . . . . . . . . . . 5noise. . . . . . . . . . . . . . . 157–158parking . . . . . . . . . . . . . . . 160servicing . . . . . . . . . . . . . . . 245when storing your vehicle . . . . . . . 273

Break-in period . . . . . . . . . . . . . . 5Brights (high beams) . . . . . . . . . . . . 80Bulbs, replacing . . . . . . . . . . . . . 256

headlamps . . . . . . . . . . . . . . 256


Index 293

CCanada, customer assistance . . . . . . . 192Canada, warranty information . . . . . . . 4Canadian Motor Vehicle Arbitration Plan

(CAMVAP). . . . . . . . . . . . . . 193Carbon monoxide in exhaust . . . . . . . . 48Car seats for children

(see Child safety seats) . . . . . . . . . 24Cassette tape player

(see Electronic sound system) . . . 134, 140Catalytic converter . . . . . . . . . . . 261CD player

(see Electronic sound system) . . . . . 128Chains, tires . . . . . . . . . . . . . . 238Changing a tire . . . . . . . . . . . . . 173Child safety restraints . . . . . . . . . . . 23

child safety seats . . . . . . . . . . . . 24Child safety seats

and air bags . . . . . . . . . . . 17, 24–25attaching with tether straps . . . . . . . 34automatic locking mode (retractor) . . 13, 24tether anchorage hardware . . . . . . . 34

Chime, safety belt . . . . . . . . . . . . . 54Cleaning your vehicle

CD player and discs . . . . . . . . . 131chrome and aluminum parts . . . . . . . 7engine compartment . . . . . . . . . 210exterior . . . . . . . . . . . . . . . . 6exterior lamps . . . . . . . . . . . . . 81fabric . . . . . . . . . . . . . . . . 112headlamps . . . . . . . . . . . . . . . 81instrument panel . . . . . . . . . . . . 65plastic parts . . . . . . . . . . . . . . 7polishing. . . . . . . . . . . . . . . . 6rustproofing . . . . . . . . . . . . . . 7safety belts . . . . . . . . . . . . . . . 15tail lamps . . . . . . . . . . . . . . . 81upholstery and interior trim . . . . . . 112washing . . . . . . . . . . . . . . . . 6


294 Index

Cleaning your vehicle (continued)wheels . . . . . . . . . . . . . . . . 239windows . . . . . . . . . . . . . . . . 72

Clock. . . . . . . . . . . . . . . . 127, 143Clutch

operation while driving . . . . . . . . 153recommended shift speeds . . . . . . . 156shifting the gears . . . . . . . . . . . 154

Cold engine starting . . . . . . . . . . . . 43Combination lap and shoulder belts . . . . . 9Compact disc player

(see Electronic sound system) . . . 122, 128Compact disc radio

(see Electronic sound system) . . . . . 122Console, description . . . . . . . . . . . 114Controls

instrument panel . . . . . . . . . . . . 63mirrors. . . . . . . . . . . . . . . . 113steering column . . . . . . . . . . . . . 77

Coolant (see Engine coolant)checking and adding . . . . . . . . . 221drain and flush . . . . . . . . . . . . 226preparing for storage . . . . . . . . . 272specifications . . . . . . . . . . . . . 226temperature gauge . . . . . . . . . . . 61

Cooling fan . . . . . . . . . . . . . . . 204Crankcase emission filter . . . . . . . . . 268Cruise control (see Speed control) . . . . . . 89Customer Assistance Center,

Ford (U.S.) . . . . . . . . . . . . . . 187Customer Assistance Centre,

Ford of Canada . . . . . . . . . . . . 192

DDashboard (see Instrument panel) . . . . . . 63Daytime running light system . . . . . . . 78Defects, reporting . . . . . . . . . . . . 192Dipstick

engine oil . . . . . . . . . . . . . . 218power steering fluid . . . . . . . . . . 247

Disabled vehicle (see Towing) . . . . . . 181


Index 295

Dispute Settlement Board . . . . . . . . 188Doors . . . . . . . . . . . . . . . . . . 95Driving under special conditions

bad weather . . . . . . . . . . . . . 162heavy load . . . . . . . . . . . . . . 164high water . . . . . . . . . . . . . . 164slippery roads . . . . . . . . . . . . 162tips for safe driving. . . . . . . . . . 162towing a trailer . . . . . . . . . . . . 166

EElectronic radio with cassette

(see Electronic sound system) . . . . . 134Electronic sound system

antenna . . . . . . . . . . . . . . . . 75atenna . . . . . . . . . . . . . . . . . 75radio reception . . . . . . . . . . . . 143tuning the radio . . . . . . . . . 123, 137warranty and service information . . . 146

Electronic stereo cassette radio(see Electronic sound system) . . . . . 134

Electronic stereo radio(see Electronic sound system) . . . . . 134

Emergencies, roadsideassistance . . . . . . . . . . . . . . 185battery acid spills . . . . . . . . . 169, 242jump-starting . . . . . . . . . . . . . 169towing. . . . . . . . . . . . . . . . 181

Emergency brake (parking brake) . . . 158, 160Emission control system

catalytic converter . . . . . . . . . . 261emissions warranty . . . . . . . . 261–262

Enginecheck engine warning light . . . . . . . 58does not start . . . . . . . . . . . . . 44fuel injected engine, starting . . . . . 42–43fuel pump shut-off switch . . . . . . . . 46preparing to start . . . . . . . . . . . . 42starting . . . . . . . . . . . . . . 37, 43starting after a collision . . . . . . . . . 46


296 Index

Engine (continued)storing your vehicle . . . . . . . . 271–272

Engine block heater . . . . . . . . . . . . 45Engine coolant

checking and adding . . . . . . . . . 221checking hoses . . . . . . . . . . . . 229disposal . . . . . . . . . 204, 220, 225, 244drain and flush . . . . . . . . . . . . 226preparing for storage . . . . . . . . . 272temperature gauge . . . . . . . . . . . 61

Engine coolant temperature gauge . . . . . 61description . . . . . . . . . . . . . . . 61mechanical . . . . . . . . . . . . . . . 61

Engine fan . . . . . . . . . . . . . . . 204Engine knocking. . . . . . . . . . . . . 213Engine oil

changing oil and oil filter . . . . . . . 220checking and adding . . . . . . . . . 218dipstick . . . . . . . . . . . . . . . 218disposal . . . . . . . . . 204, 220, 225, 244engine oil pressure gauge . . . . . . . . 60filter, specifications . . . . . . . . . . 268synthetic oil . . . . . . . . . . . 217–218“break-in” oils . . . . . . . . . . . . 5–6viscosity . . . . . . . . . . . . . . . 217

Exhaust fumes . . . . . . . . . . . . . . 48Extended Service Plan, Ford . . . . . . . . 4

FFederal Communications Commission . . . 145Federal Highway Administration

Regulation . . . . . . . . . . . . . . . 5Flashers, hazard . . . . . . . . . . . . . . 81Flashing the lights . . . . . . . . . . . . . 81Flat tire. . . . . . . . . . . . . . . . . 173Foglamps . . . . . . . . . . . . . . . . . 74Ford Customer Assistance Center . . . . . 187Ford Dispute Settlement Board . . . . . . 188Ford Extended Service Plan . . . . . . . . 4Ford Motor Company of Canada . . . . . 192


Index 297

Ford of Canada CustomerAssistance Centre . . . . . . . . . . . 192

Foreign registration . . . . . . . . . . . 194French owner guides, how to obtain . . . . 3Fuel

calculating fuel economy . . . . . . . 216choosing the right fuel . . . . . . . . 212filling your vehicle with fuel. . . . . . 210filter, specifications . . . . . . . . . . 268fuel gauge . . . . . . . . . . . . . . . 60octane rating . . . . . . . . . . . . . 213running out of fuel . . . . . . . . . . 215safety information relating to

automotive fuels . . . . . . . . . . 214storing your vehicle. . . . . . . . . . 272treating emergencies . . . . . . . . . 214

Fuel capremoving . . . . . . . . . . . . . . 210replacing. . . . . . . . . . . . . . . 212

Fuel filter, specifications . . . . . . . . . 268Fuel gauge . . . . . . . . . . . . . . . . 60Fuel pump shut-off switch, starting

after a collision . . . . . . . . . . . . . 46Fuses . . . . . . . . . . . . . . . . . 248

GGas cap (see Fuel cap) . . . . . . . . . . 210Gas mileage (see Fuel economy) . . . 212, 216Gasohol . . . . . . . . . . . . . . . . 214Gasoline (see Fuel) . . . . . . . . . . . 210Gauges, Electronic

engine coolant temperature gauge . . . . 61fuel gauge . . . . . . . . . . . . . . . 60odometer . . . . . . . . . . . . . . . 62speedometer . . . . . . . . . . . . . . 62

Gauges, Mechanicalcharging system gauge . . . . . . . . . 60engine coolant temperature gauge . . . . 61engine oil pressure gauge . . . . . . . . 60fuel gauge . . . . . . . . . . . . . . . 60


298 Index

Gauges, Mechanical (continued)odometer . . . . . . . . . . . . . . . . 62speedometer . . . . . . . . . . . . . . 62tachometer . . . . . . . . . . . . . . . 62trip odometer . . . . . . . . . . . . . . 62

GAWR (Gross Axle Weight Rating)calculating . . . . . . . . . . . . . . 165definition. . . . . . . . . . . . . . . 164

Gearshiftautomatic operation . . . . . . . . . . 147downshifting . . . . . . . . . . . . . 156locking the gearshift. . . . . . . . . . . 37positions . . . . . . . . . . . . . . . 147shifting the gears . . . . . . . . . 147, 154upshifting . . . . . . . . . . . . . . 156

GVWR (Gross Vehicle Weight Rating)calculating . . . . . . . . . . . . . . 165definition. . . . . . . . . . . . . . . 164

HHatchback release . . . . . . . . . . . . 117Hazard flashers . . . . . . . . . . . . . . 81Headlamps

aiming . . . . . . . . . . . . . . . . 256checking alignment . . . . . . . . . . 256cleaning . . . . . . . . . . . . . . . . 81daytime running lights . . . . . . . . . 78flashing . . . . . . . . . . . . . . . . 81high beam . . . . . . . . . . . . . . . 80raising manually . . . . . . . . . . . . 79replacing bulbs . . . . . . . . . . . . 256

Head restraints . . . . . . . . . . . . . 104High beams

indicator light . . . . . . . . . . . . . 58operation . . . . . . . . . . . . . . . . 80

Hoodlatch location . . . . . . . . . . . . . 206release lever . . . . . . . . . . . . . 206working under the hood . . . . . . . . 204

Horn . . . . . . . . . . . . . . . . . . . 87Hoses, checking . . . . . . . . . . . . . 229


Index 299

IIdentification Number, Vehicle (VIN) . . . 193Idle

relearning . . . . . . . . . . . . . . 173speed . . . . . . . . . . . . . . . . . 45

Ignitionpositions of the ignition . . . . . . . . . 37removing the key . . . . . . . . . . . . 41

Infant seats (see Safety seats) . . . . . . . . 24Instrument cluster . . . . . . . . . . . . . 51

mechanical . . . . . . . . . . . . . . . 52Instrument panel

lighting up panel and interior . . . . . . 72location of components . . . . . . . . . 63

JJack

operation . . . . . . . . . . . . . . 177positioning . . . . . . . . . . . . . . 177

Jump-starting your vehicleattaching cables. . . . . . . . . . . . 171disconnecting cables. . . . . . . . . . 173

KKeys

positions of the ignition . . . . . . . . . 37removing from the ignition . . . . . . . 41stuck in lock position . . . . . . . . . . 37

LLamps

checking . . . . . . . . . . . . . . . 256daytime running light system . . . . . . 78flashing the lamps . . . . . . . . . . . 81fog lamps . . . . . . . . . . . . . . . 74hazard flashers . . . . . . . . . . . . . 81high beams . . . . . . . . . . . . . . 80instrument panel, dimming . . . . . . . 72


300 Index

Lamps (continued)interior lamps. . . . . . . . . . . . . . 72replacing bulbs . . . . . . . . . . . . 256

Lane change indicator(see Turn signal) . . . . . . . . . . 77, 83

Lights, warning and indicatorair bag . . . . . . . . . . . . . . . . . 55anti-lock brakes (ABS) . . . . . . . . . . 57brake . . . . . . . . . . . . . . . . . 55check engine . . . . . . . . . . . . . . 58high beam . . . . . . . . . . . . . . . 58rear ABS . . . . . . . . . . . . . . . . 57safety belt . . . . . . . . . . . . . . . 54testing the warning lights . . . . . . . . 43turn signal indicator. . . . . . . . . . . 77

Load limitsGAWR . . . . . . . . . . . . . . . . 164GVWR . . . . . . . . . . . . . . . . 164trailer towing . . . . . . . . . . . . . 166

Lug nuts, standard . . . . . . . . . . . 177

M

Maintenance schedule and record(see separate MaintenanceSchedule and Record booklet) . . . . . . 3

Maintenance (see Servicing) . . . . . . . 203Maintenance (see servicing). . . . . . . . 203Manual transaxle

clutch . . . . . . . . . . . . . . . . 153shifting gears . . . . . . . . . . . . . 154shift speeds. . . . . . . . . . . . . . 156

Manual transmissionbacking up (reverse). . . . . . . . . . 155shifting gears . . . . . . . . . . . . . 154shift speeds. . . . . . . . . . . . . . 156

Map pockets . . . . . . . . . . . . . . 115Master cylinder, brakes . . . . . . . . . 245Methanol in fuel. . . . . . . . . . . . . 214


Index 301

Mileage, calculating fuel economy . . . . 216Mirrors, remote control . . . . . . . . . 113Moon roof . . . . . . . . . . . . . . . 102Motorcraft parts. . . . . . . . . . . . . 268

NNational Highway Traffic Safety

Administration . . . . . . . . . . . . 192New vehicle break-in . . . . . . . . . . . 5

OOctane rating . . . . . . . . . . . . . . 213Odometer

description . . . . . . . . . . . . . . . 62trip odometer . . . . . . . . . . . . . 62

Oil filter . . . . . . . . . . . . . . . . 268Oil (see Engine oil) . . . . . . . . . . . 217Oil viscosity . . . . . . . . . . . . . . 217On-board diagnostic (OBD II) system . . . 264Order forms, service information . . . . . 124Overseas offices . . . . . . . . . . . . . 194

PParking brake

operation . . . . . . . . . . . . . . 160warning light. . . . . . . . . . . . . . 55

Parts (see Motorcraft Parts) . . . . . . . 268PCV valve, specifications . . . . . . . . 268Power door locks . . . . . . . . . . . . . 96Power features

door locks . . . . . . . . . . . . . . . 96mirrors . . . . . . . . . . . . . . . 113moon roof . . . . . . . . . . . . . . 102windows. . . . . . . . . . . . . . . 101

Power steeringdipstick . . . . . . . . . . . . . . . 247driving with power steering . . . . . . 157fluid, checking and adding . . . . . . 247servicing . . . . . . . . . . . . . . . 157

Prop rod, hood . . . . . . . . . . . . . 206


302 Index

R

Radio (see Electronic sound systems) . . . 121Rear window . . . . . . . . . . . . . . 101Remote entry system

replacement/additional transmitters. . . 100replacing the batteries . . . . . . . . . . 99

Reporting safety defects . . . . . . . . . 192Restraints, safety (see Safety restraints)

adult. . . . . . . . . . . . . . . . . . 9child . . . . . . . . . . . . . . . . . . 23head . . . . . . . . . . . . . . . . . 104infant . . . . . . . . . . . . . . . 23–24

Roadside assistance . . . . . . . . . . . 185Roadside emergencies . . . . . . . . . . 169Rotating the tires . . . . . . . . . . . . 234

S

Safe driving tips. . . . . . . . . . . . . 162Safety belts (see Safety restraints) . . . . . . 9Safety defects, reporting . . . . . . . . . 192Safety information relating to

automotive fuels . . . . . . . . . . . 214Safety restraints

automatic locking mode (retractor) . . . . 13cleaning the safety belts . . . . . . . . . 15extension assembly . . . . . . . . . . . 14for children. . . . . . . . . . . . . . . 23for infants . . . . . . . . . . . . . 23–24for pregnant women. . . . . . . . . . . 9head . . . . . . . . . . . . . . . . . 104maintenance . . . . . . . . . . . . . . 14replacement . . . . . . . . . . . . . . 14warning light and chime. . . . . . . . . 54

Safety seats for childrenand air bags . . . . . . . . . . 17, 24–25attaching with tether straps . . . . . . . 34automatic locking mode (retractor) . . . . 13tether anchorage hardware . . . . . . . . 34


Index 303

Seat belts (see Safety restraints). . . . . . . 9Seats

child safety seats . . . . . . . . . . . . 24folding rear seats . . . . . . . . . . . 110head restraints . . . . . . . . . . . . 104rear seat access . . . . . . . . . . . . 110split-folding rear seat . . . . . . . . . 110

SECTION: DR POSITION: 6705. . . . . . 147Serial number (VIN). . . . . . . . . . . 193Service concerns . . . . . . . . . . . . 186Servicing your vehicle

precautions when servicing . . . . . . 204servicing when you tow . . . . . . . . 181

Shift positions (see Gearshift). . . . . 147, 154Sliding moon roof (see Moon roof) . . . . 102Snow tires and chains . . . . . . . . . . 238Spare tire

changing the tire . . . . . . . . . . . 175finding the spare . . . . . . . . . . . 175removing the spare tire . . . . . . . . 175temporary spare . . . . . . . . . . . 174

Spark plugs, specifications . . . . . . . . 268Special driving conditions . . . . . . . . 162Speed control

accelerating . . . . . . . . . . . . . . 91canceling a set speed . . . . . . . . . . 93resetting . . . . . . . . . . . . . . . . 92resuming a set speed . . . . . . . . . . 93tap up/tap down . . . . . . . . . . . . 92turning off . . . . . . . . . . . . . . . 93

Speedometer . . . . . . . . . . . . . . . 62Starting your vehicle

preparing to start your vehicle . . . . . . 42starting a cold engine . . . . . . . . . . 43starting after a collision . . . . . . . . . 46starting a warm engine . . . . . . . . . 44starting your vehicle if the battery

is disabled . . . . . . . . . . . . . 169Steering, power . . . . . . . . . . . . . 157Steering, tilt . . . . . . . . . . . . . . . 88


304 Index

Steering wheelhorn . . . . . . . . . . . . . . . . . . 87locking . . . . . . . . . . . . . . . . . 37speed controls . . . . . . . . . . . . . 89

Storage compartments . . . . . . . . . . 115center console. . . . . . . . . . . . . 114map pockets . . . . . . . . . . . . . 115

Storing your vehicle . . . . . . . . . . . 271Sunroof (moon roof) . . . . . . . . . . . 102Supplemental air bag readiness light . . . . 55

TTachometer . . . . . . . . . . . . . . . . 62Tail lamps, cleaning . . . . . . . . . . . . 81Temperature control

(see Climate control) . . . . . . . . . . 65Testing the warning lights . . . . . . . . . 43Tether anchor installation

(see Child restraints) . . . . . . . . . . 34Tires

changing . . . . . . . . . . . . . . . 173checking the pressure . . . . . . . . . 232cleaning . . . . . . . . . . . . . . . 239inspection and maintenance . . . . . . 233replacing . . . . . . . . . . . . . . . 234rotating . . . . . . . . . . . . . . . 234snow tires and chains . . . . . . . . . 238spare tire . . . . . . . . . . . . . . . 175storing your vehicle . . . . . . . . . . 273tire grades . . . . . . . . . . . . . . 236treadwear . . . . . . . . . . . . 234, 236wear bands . . . . . . . . . . . . . . 234wheel and tire matching . . . . . . . . 235

Towing a trailer (see Trailer towing) . . . 166Towing your vehicle . . . . . . . . . . . 181

with a tow truck . . . . . . . . . . . 181Transaxle

automatic operation . . . . . . . . . . 147fluid, checking and adding

(automatic) . . . . . . . . . . . . . 242


Index 305

Transaxle control switch . . . . . . . . . 149Transmission, automatic operation . . . . 147Transmission control switch . . . . . . . 149Trip odometer . . . . . . . . . . . . . . 62Tune-up specifications (VECI) . . . . . . 263Turn signal

indicator lights . . . . . . . . . . . . . 83lever . . . . . . . . . . . . . . . 77, 83

U

Upshift speeds . . . . . . . . . . . . . 156Used engine oil, disposal . . 204, 220, 225, 244

V

VECI (Vehicle Emission Control Information)decal . . . . . . . . . . . . . . . . 263

Vehicle Identification Number (VIN) . . . 193Vehicle loading

automatic transaxles . . . . . . . . . 165automatic transmissions . . . . . . . . 165calculating the load . . . . . . . . . . 165manual transaxles. . . . . . . . . . . 165manual transmissions . . . . . . . . . 165

Vehicle storage . . . . . . . . . . . . . 271Ventilating your vehicle

(see Climate control) . . . . . . . . . . 65Viscosity (see Engine oil) . . . . . . . . 217

W

Warm engine, starting . . . . . . . . . . . 44Warning chimes, safety belt . . . . . . . . 54Warning lights, testing. . . . . . . . . . . 43Warning lights (see Lights). . . . . . . . . 51Warranties

basic. . . . . . . . . . . . . . . . . . 4Canada . . . . . . . . . . . . . . . . 4radio . . . . . . . . . . . . . . . . 146

Warranty Information Booklet . . . . . . . 4


306 Index

Washer fluidreservoir . . . . . . . . . . . . . . . 229windshield . . . . . . . . . . . . . . 229

Weight limits (GAWR, GVWR) . . . . . . 164Wheel and tire matching . . . . . . . . . 235Wheel dollies (see Towing) . . . . . . . . 181Wheels

cleaning . . . . . . . . . . . . . . . 239covers . . . . . . . . . . . . . . . . 177inspection and maintenance . . . . . . 232lug nuts . . . . . . . . . . . . . . . 175replacement . . . . . . . . . . . . . 235

Windows . . . . . . . . . . . . . . . . 101one-touch down. . . . . . . . . . . . 101power windows, operating . . . . . . . 101

Windshield washer fluid and wiperschecking and adding fluid . . . . . . . 229operation . . . . . . . . . . . . . . . . 84reservoir . . . . . . . . . . . . . . . 229specifications . . . . . . . . . . . . . 230

Windshield wipers and washer . . . . . . . 84Wrecker towing . . . . . . . . . . . . . 181


308

Service StationInformation

[GS00200(ALL)04/95]

twenty-eight pica chart:0032118-H

File:prgsp.exUpdate:Fri Jun 23 19:30:20 1995

Documents

96 probe