4
96-12 Interior lights, servicing (Avant) CAUTION! Disconnect the battery Ground (GND) strap before working on the electrical system. Notes: Before disconnecting the battery, determine the correct coding for the anti-theft radio. After reconnecting the battery, check and activate the vehicle's electrical equipment (radio, clock, comfort and convenience features, etc.) as outlined in this Repair Manual or the Owner's Manual. Page 1 of 4 Interior lights, servicing (Avant) 11/20/2002 http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.3

96-12 Interior Lights Avant

Embed Size (px)

Citation preview

  • 96-12

    Interior lights, servicing (Avant) CAUTION!

    Disconnect the battery Ground (GND) strap before working on the electrical system.

    Notes: Before disconnecting the battery, determine the correct coding for the anti-theft radio.

    After reconnecting the battery, check and activate the vehicle's electrical equipment (radio, clock, comfort and convenience features, etc.) as outlined in this Repair Manual or the Owner's Manual.

    Page 1 of 4Interior lights, servicing (Avant)

    11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.3

  • 96-13

    Complete overview

    1 - Cargo area light

    2 - Rear interior/reading light, right and left sides

    3 - Bulb for reading light

    12 V, 5 W

    4 - Catch

    5 - Positioning hooks (2x)

    6 - Reading light harness connector

    7 - Positioning hooks (2x)

    8 - Cargo area light harness connector

    9 - Catch

    10 - Bulb for cargo area light

    12 V, 10 W

    Page 2 of 4Interior lights, servicing (Avant)

    11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.3

  • 96-14

    Rear interior/reading lights, removing and installing

    Removing

    Installing

    - Using screwdriver, carefully pry out interior/reading light -2- from roof at catch -4-.

    - Disconnect harness connector -6-.

    - Remove bulb -3- from socket.

    - During installation, insert positioning hooks -5- and, on opposite side, make sure that catch -4- engages audibly.

    - Remainder of installation is in reverse order of removal.

    Page 3 of 4Interior lights, servicing (Avant)

    11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.3

  • 96-15

    Cargo area light, removing and installing

    Removing

    Installing

    - Using screwdriver, carefully pry out cargo area light -1- from roof at catch -9-.

    - Disconnect harness connector -8-.

    - Remove lens from lamp holder.

    - To change bulb, remove bulb from clamp-type socket.

    - During installation, insert positioning hooks -7- and, on opposite side, make sure that catch -9- engages audibly.

    - Remainder of installation is in reverse order of removal.

    Page 4 of 4Interior lights, servicing (Avant)

    11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.3