95_Ultrasite Commisioning Class

7/28/2019 95_Ultrasite Commisioning Class

http://slidepdf.com/reader/full/95ultrasite-commisioning-class 1/70

© NOKIA D6I 069981AE / v0.0.3 / 3-Apr-00 / AS page: 1/88

WELCOM TO THE

ULTRASITE

COMMISSIONING CLASS




Name: Nils Peter, Frank Ashauer

Organization: RAS R&D

Company: Böke & WalterfangElectronic SystemsOberhausen, Germany

Phone: +49 208 996190

e-mail: [email protected]




NOKIA ULTRASITEEDGE BASE STATION

Plugin units




TRANSCEIVER

• Consists of two parts:

• Transceiver RF Unit

• Transceiver Baseband Unit




TRANSCEIVER RF Unit

• Transceiver RF Unit (1-12 units)

• Consists of one transmitter, one main receiver and onediversity receiver




TRANSCEIVER RF UNIT


http://slidepdf.com/reader/full/95ultrasite-commisioning-class 7/70© NOKIA D6I 069981AE / v0.0.3 / 3-Apr-00 / AS page: 7/88

DUAL BASEBAND UNIT

• Dual Baseband Unit (1-6 units)

• Performs DSP functions

• Consists of two independent Transceiver BasebandModules

• Each Baseband module independently supports its own

Transceiver RF Unit.

• Each module independently controls its own frequencyhopping function



DUAL BASEBAND UNIT

99584316

BB2A11BB2A11

STATUSSTATUS

A A

BB



DUAL BASEBAND UNIT

F-bus signals

Clock and

Control signals

D-bus signals

Uplink and

Downlink signals

Section A

D-busInterface

Section B

D-busInterface

Section A

ControlBlock

Section B

ControlBlock

Section A

DSP Block

Section B

DSP Block

F-bus for both

Section A and

Section B

99627445

BASEBAND MODULE BLOCK DIAGRAM



DUAL DUPLEX UNIT

• Performs duplex operation of the TX and RX signals intoa common antenna

• Provides filtering and amplification for main and diversityreceive signals

• Contains variable low and high gain LNAs for optimalamplification of the receive signal from the optional

masthead amplifier

• Sub-banded for the GSM 1800 to increase TX/RXseparation and achieve better performance

Dual Duplex Unit (0-6 units)



DUAL DUPLEX UNIT

99614746



DUALBAND DUPLEX UNIT

• Dualband Duplex Unit (0-6 units)

• Combines outputs from GSM 900 and GSM 1800DDUs or RTCs into one antenna feeder



DUALBAND DUPLEX UNIT

99614797

Antenna

RX/TX GSM 1800 band

RX/TX GSM 900 band



COMBINER

• Wideband Combiner (0-9 units)

• Combines the output of two transmitters into oneantenna (with 1 WBC)

• Combines the output of four transmitters into oneantenna (with 3 WBC)

• Remote Tune Combiner (0-2 units)

• Combines the output of up to six transmitters into oneantenna



WIDEBAND COMBINER

99614773



REMOTE TUNE COMBINER





MULTICOUPLER

99586474 M2xA M6xA



MASTHEAD AMPLIFIER

• Masthead Amplifier (0-12 units)

• Provide 33 dB RX gain for the GSM 1800/GSM 1900Base Stations

• Provide 32 dB RX gain for the GSM 900 Base Stations



MASTHEAD AMPLIFIER



BIAS-TEE

• Bias-Tee (0-12 units)

• Provides DC power to the MHA via an RF cable

• Two versions of Bias-Tee available:

• Bias-Tee without VSWR antenna monitoring

• Bias-Tee with VSWR antenna monitoring



BIAS-TEE

• Bias-Tee with VSWR monitoring

• Checks the condition of the antenna line

• Creates alarm if measured parameters exceed thelimits

• Can be used with or without the MHA

• Bias-Tee without VSWR monitoring

• No VSWR monitoring capabilities

• Solely used with the MHA




BIAS TEE




TRANSMISSION UNITS

• Interconnects UltraSite BTSs

• Connects other components of the network such as BSCs,and other BTSs through the Abis interface.

• Transmission media can be either a radio link transmission,E1/T1 wire line transmission, or a fibre optic transmission(STM-1)

• UltraSite BTS supports 16, 32,and 64 kbits/sec data ratesfor transceiver RF signaling via Abis interface

• O&M signaling data rate can be 16 or 64 kbits/s




TRANSMISSION UNIT TYPES

FC E1/T1 (Wire line transmission)

• No cross-connection capability

• Only 1 FC E1/T1 unit is allowed per BTS cabinet

• Provides 1x2 Mbit/s 75/120 ohms OR 1x1.5 Mbit/s 100ohms interfaces




FC E1/T1 TRANSMISSION UNIT

RX line

TX line

RX/TX line

75 120/100 99591936





FXC E1 and FXC E1/T1 (Wire line transmission)

• Provides cross-connection capability at 8 kbit/s

• Supports grooming, branching and loop protection

•FXC E1

• 4x2 Mbit/s interfaces

• 4 coaxial 75 ohms TX/RX interfaces

•FXC E1/T1 • 4x2/1.5 Mbit/s interfaces

• 4 twisted pair 120/100 ohms TX/RX interfaces




FXC E1 TRANSMISSION UNIT

RX line, IF4

TX line, IF4

TX line, IF3

RX line, IF3

RX line, IF2

TX line, IF2

TX line, IF1

RX line, IF1

99591909




FXC E1/T1 TRANSMISSION UNIT

RX/TX line 4

RX/TX line 3

RX/TX line 2

RX/TX line 1

99591924





FXC RRI (PDH Radio Transmission)

• Connects outdoor units of the Nokia FlexiHopper andMetroHopper or to another radio indoor unit (FC, FXCRRI, RRIC, and FIU19”)

•Provides 2 Flexbus interfaces per card

• Capacity of Flexbus SW selectable between 2 x 2Mbit/s, 4 x 2 Mbit/s, 8 x 2 Mbit/s, and 16 x 2 Mbit/s

• Supports grooming, branching and loop protection

• Supports up to a distance of 300m with RG214 and140m with RG223 for outdoor unit

• Power feed to radio via Flexbus cable

• Connector type TNC, impedance of 50 ohms




FXC RRI TRANSMISSION UNIT

RX/TX (Flexbus radio 2)

RX/TX (Flexbus radio 1)

99591912





FXC STM (SDH Fibre Optic Radio Transmission)

• FXC STM-1

• Optical interface with 63 x 2 Mbit/s

• FXC Bridge • Always used with FXC STM-1 for BTS internal

21x2 Mbit/s add/drop capacity

• 2 optical STM-1 interfaces

• Add and drop functionality

• Loop and equipment protection




FXC STM TRANSMISSION UNIT

Optical STM-1 interface 2

Optical STM-1 interface 1

TX

RXTX

RX

Power interface 2

Power interface 1

00133344




FXC BRIDGE

00201366

Q interfaceX




BASE OPERATION ANDINTERFACE UNIT

• Base Operation and Interface units (1 unit)

• Responsible for the control functions common to all

other units such as O&M functions, main clockfunctions, and external alarms collection

BASE OPERATION AND




BASE OPERATION ANDINTERFACE UNIT

00129021

BOIABOIA

STATUSSTATUS

RESETRESET

LM PLM P

FCLKFCLK

13 MHz13 MHz

MONITOR

INTERFACE

MONITOR

INTERFACE




AC POWER SUPPLY UNIT

• PWSA (1-2 units)

• Operates on AC input power and provides the DC outputpower voltage

• BTS can accommodate up to 2 AC power supplies• PWSA supports full redundancy up to 6 TRX

configuration

• Provide power feed to the MHAs




AC POWER SUPPLY UNIT

99584258

R (FLT)Y (STAND BY)G (OPR)




DC POWER SUPPLY UNIT

• PWSB (1-3 units)

• Operates on DC input power and provides the DCoutput power voltage

• BTS can accommodate up to 3 DC power supplies

• PWSB Supports full redundancy for up to 12 TRXconfiguration

• Provide power feed to the MHAs




DC POWER SUPPLY UNIT

R (FLT)Y (STAND BY)G (OPR)

99584285




TEMPERATURE CONTROL SYSTEM

• Controls

• Door mounted Cabinet Cooling Fan (1) part of theOutdoor Application Kit (OAKA)

• Unit fans (11) of the cabinet core

• BOIA unit controls the speed of the fan units accordingto the temperature information from other units

• Cooling is performed depending on the temperature of the particular unit




• Heater Unit (1)

• Needed in the Outdoor BTS cabinet to cold start when theoperating temperature is in the range of -10 and -33

oC

(+14 and -27oF)

• Maintain interior cabinet temperature

TEMPERATURE CONTROL SYSTEM




CABINET COOLING FAN

00159448

Location for cabinet fan

Cabinet fanassembly

Cabinet fan

cover

Wiring to fanpower and control




HEATER UNIT

00159436Heater unitCover plate

Wiring to heater power and control




UNITS FAN

00130035

3 Unit fans (Transceiver area)

3 Unit fans (Transceiver or IBBU area)

NOTE: 11 Unit fans per cabinet

1 Unit fan (BB2x, BOI)

Cabinet Interface

Area for installation of WCxx/ DVxx or RTxx

1 Bottom RF Filter unit fan (Horizontal mounting,not used with IBBU configuration)

1 Top RF Filter unit fan (Horizontal mounting)

2 Unit fans (Power supply area)




INTEGRATED BATTERY BACKUP

• Fits at the bottom half of the cabinet

• Used as a backup power source in the absence AC mainspower

• Main Components • Rectifier Unit

• Connection Unit (ADUA)

• Cabinet Control Unit (CCUA)

• Battery Backup Unit (BBAG)

• IP54 Enclosure Unit (LTEA)




UltraSite/Talk BTS Comparison

Parameters/Features UltraSite EDGE BTS Talk Family BTS

Number of TRX per cabinet 12 6

Airconditioning No Yes

Masthead Amplifier Gain (GSM 1800) 33 dB 12 dB

Static RX Sensitivity, single branch (GSM 1800) –111.0 dBm (with MHA) –106.0 dBm (with MHA)

Static RX Sensitivity, single branch (GSM 1800) 3 dB improvement with 2-way Diversity -109 dBm with 2-way Diversity

Static RX Sensitivity, single branch (GSM 1800) 6 dB improvement with 4-way Diversity N/A

Max RF Output Power at BTS Ant. Connector 44.5 dBm (GSM 1800, By-pass) 41.0 dBm (GSM 1800, By-pass)Max RF Output Power at BTS Ant. Connector 41.0 dBm (GSM 1800, 2-way WBC) 38.0 dBm (GSM 1800, 2-way WBC)

Max RF Output Power at BTS Ant. Connector 37.5 dBm (GSM 1800, 4-way WBC) 36.5 dBm (GSM 1800, 4-way WBC)

Max RF Output Power at BTS Ant. Connector 42 dBm (GSM 1800, RTC) 40.0 dBm (GSM 1800, RTC)

BTS Traffic Capacity per Cabinet Twice of the Talk Family with 12 TRX Half of the UltraSite with 6 TRX

Auto Detection of Installed Units Yes No

Transmission Media E1/T1 Wireline, MWR Link, & Fibre Optic E1/T1 Wireline & MWR Link

Multi-purpose Platform for GSM/EDGE/WCDMA Yes No

High Voice and Data Capacity Yes No

Chaining and Expansion Yes No

Space Requirements for 12 TRX Cabinet Almost half required of the Talk Family More space for 12 TRX Cabinets

Weight and Dimensions Light Weight and More Compact Heavy Weight




ULTRASITE EDGE BASE STATION

Installation




TYPE OF POWER SUPPLY BATA AC

PWSAAC

PWSBDC

Nominal Voltage 208-230 V 208-230 V -48 / 60 V Permitted Voltage Range 166-276 V 166-276 V -36 to-72V

AC Voltage frequency range 50-60Hz 50-60Hz N/A

Configuration: Input voltage Circuit Breaker /Fuse Rate:

External DC supply DC -48 V 125A

External DC supply DC -60 V 100A IBB + 6 TRX AC 230 V 3 X 16A

IBB + 6 TRX + Heater AC 230 V 3 X 25A

SSU + 12 TRX AC 230 V 3 X 25A

SSU + 12 TRX + Heater AC 230 V 3 X 35A

Configuration Typical Watts Maximum watts Heat dissipation / W1 TRX TRX alone 190 295 168

1 BTx Booster alone 310 391 201

6 TRX With Cabinet 2300 2402

12 TRX With Cabinet 3900 4803

1BATA Rectifier 1444

ELECTRICAL REQUIREMENTS

INSTA ATION




INSTALLATION Property Value Connector Type

Antenna Connectors 6 + 6 optional

Max. 48dBm / TRX

7/16 (DIN) female

AC Supply 166-276 V Screw latch 0.5…16mm

DC Supply -36 to-72V Screw latch 16…50mm

Grounding 10. Busbar, 5 and 8mmscrew

ESD Stud

External Alarms And Controls TTL D-37 pin or optionalscrew latch

Frame Number, Frame Clock,Mains and SISU alarm input

RS-485 D-15 pin

Frame Number, Frame Clock,Mains and SISU alarm output

RS-485 D-15 pin

Abis 2 Mbit/s (E1) or 1.5Mbit/s (T1) PCM

TQ female for 120ohm / BT43 femalefor 75 ohm

DTRU FXC RRI Radiolink i/o TNC

Q1 Interface- SISU RS-485 TQ

Q1 Interface RS-485 TQ

MMI / ILMT RS-232 BQ

13 MHz test clock At BOI front panel 50 ohm SMB female

Test FCLK At BOI front panel 50 ohm SMB female

Test / Monitor Interface BOIA unit LVTTL D-25 female

CABLE ENTRY BLOCK




CABLE ENTRY BLOCK Nut (7x)

Bracket

Captivebolt (7x)

Roof hinge pin,spring loaded(2x)

Top of cabinet withcover removed

99613244

Cable entry

block, 6 sections

EXTERNAL INTERFACES




EXTERNAL INTERFACES

Cabinetinterface

Input/Output

Qx connectors to be changed to D-9

External interface

External Alarms InputsControl Outputs

Q1_, Q1_2, Q1_SSS

X2CABINET OUTPUT 1

X2CABINET OUTPUT 1

X8EXTERNAL ALARMS INPUTS

X8EXTERNAL ALARMS INPUTS

Q1_1Q1_1 Q1_SSSQ1_SSS

X1CABINET INPUT 1

X1CABINET INPUT 1

X9EXTERNAL ALARMS INPUTS/CONTROL OUTPUTS

X9EXTERNAL ALARMS INPUTS/CONTROL OUTPUTSQ1_2Q1_2

00126254

EXTERNAL INTERFACES




EXTERNAL INTERFACES

CabinetInterface

Customer Interface

Site Support

Interface

EMC Cover for Transmission units

12 TX/RX Antennas

(also 6 on back)as required

Abis Interfaceaccess toTransmission Unit

DC Power

Input - Right side(AC Power input - Left side, optional)

99591948

ULTRASITE INDOOR CABINET




ULTRASITE INDOOR CABINET

Roof

CoreMechanics

EMC Back

Door 99614855

ULTRASITE OUTDOOR CABINET




ULTRASITE OUTDOOR CABINET

Roof

CoreMechanics

EMC Plate,Back

Back wall

Door Plinth

Side, Left

Side, Right

NOTE:Door Frame mechanics notshown for clarity. 99614867



AC SINGLE PHASE POWER




AC SINGLE PHASE POWERCONNECTIONS

L1

L2

L3

N

PE AC Power input cable

Shorting bar

99613256

NOTE: Power input wiring must adhere to local codes.L1, L2, L3 (Short Circuited)=Phase 1N= Phase 2, PE= Ground

AC THREE PHASE POWER




AC THREE PHASE POWERCONNECTIONS

L1

L2

L3

N

PE AC Power

input cable

NOTE: Power input wiring must adhere to local codes.L1= Phase 1, L2= Phase 2, L3= Phase 3N= Neutral, PE= Ground

99619126

DC INPUT POWER CABLING




DC INPUT POWER CABLING

DC Power input cable

(+)V 48RTN

V 48N(-)

99613268

ORDER OF UNITS INSTALLATION





• Integrated Battery Backup Unit

• Remote Tune Combiners

• Dual Duplex Unit / Dualband Duplex Units

• AC or DC Power Supply Units

• Transceivers

• Receiver Multicouplers






• Wideband Combiners

• Dual Baseband Units

• Base Operation and Interface Unit

• Transmission Units

• Bias-Tee

• Antenna Filter Cables

ANTENNA CABLING




ANTENNA CABLINGINSTALLATION

00127238

Antenna feedsmax. 12

Antenna cables routed beneathpower supply filters and intoantenna box

Cable clamp,upper

DC PSU filter

AC PSU filter (optional)

NOTES:

1. Cabinet details and plug-in units not shown

2. When using Bias-t or DU2A in OAKA, Bias-t/DU2A

mounts directly to inside of antenna box and antennacables connect to Bias-t/DU2A

Antenna cable connector,female, secured to insideof panel (Note 2)

DDUor (RTC)

Antenna connector,

male

Antenna box, top removed

to show cable routing

Cable clamp,lower

COMBINING BY PASS




COMBINING BY-PASSCONFIGURATION CABLING

ANT 1 ANT 1

ANT 2 ANT 2

X 1X 1

TX 2TX 2

TX 1TX 1

Warning! The weight of

this unit is over 10kg

Warning! The weight of

this unit is over 10kg

RX 2RX 2

RX 1RX 1

RX 2extRX 2ext

RX 1extRX 1ext

R (FLT)

Y (ALM)

G (OPR)

R (FLT)

Y (ALM)

G (OPR)

RXRX

TXTX

DIV

RX

DIV

RX

RXRX

TXTX

DIV

RX

DIV

RX

RXINRXIN

RX1RX1

RX2RX2

DRX1DRX1

DRX2DRX2

DRXIN

DRXIN

99616514

Multipin Connection

to TRX Backplane#993741X3

Antenna: TX/RX 1,

Diversity RX 2, #993744X3

Antenna: TX/RX 2,Diversity RX 1, #993744X3

#993856X1(2 places)

#993857X1(6 places)

2-WAY WBC CONFIGURATION




2 WAY WBC CONFIGURATIONCABLING

4 WAY WBC CONFIGURATION




4-WAY WBC CONFIGURATIONCABLING

ANT1 ANT1

ANT2 ANT2

X 1X 1

TX 2TX 2

TX 1TX 1

Warning!The weight of thisunit isover10kgWarning!The weight of thisunit isover10kg

RX 2RX 2

RX 1RX 1

RX 2extRX 2ext

RX 1extRX 1ext

R (FLT)Y (ALM)G (OPR)

R (FLT)Y (ALM)G (OPR)

TX1TX1 TX OUTTX OUT TX2TX2



RXRX

TXTX

DIVRXDIVRX

RXRX

TXTX

DIVRXDIVRX

RXRX

TXTX

DIVRXDIVRX

RXRX

TXTX

DIVRXDIVRX

RXINRXIN

RX1RX1

RX2RX2

DRX1DRX1

DRX2DRX2

DRXIN

DRXIN

RXINRXIN

RX1RX1

RX2RX2

DRX1DRX1

DRX2DRX2

DRXIN

DRXIN

99624806

Multipin Connectionto TRX Backplane#993741X3

Antenna: TX/RX#993744X3

Antenna, Diversity RX

#993744X3#993856X1(4 places)

#993857X1(8 places)

#993857X1 or #993747X3depending on length,(7 places)

REMOTE TUNE COMBINER




REMOTE TUNE COMBINERCONFIGURATION CABLING

RXRX

TXTX

DIVRXDIVRX

RXRX

TXTX

DIV

RX

DIV

RX

RXRX

TXTX

DIVRXDIVRX

RXRX

TXTX

DIVRXDIVRX

RXRX

TXTX

DIVRXDIVRX

RXRX

TXTX

DIVRXDIVRX

Multipin Connectionto TRX Backplane#993741X3

#993856X1

NOTE: Unlabeled cables are #993857X1(18 places)

Antenna: TX/RX#993744X3

Antenna: Diversity RX#993744X3

RX1RX1

RX2RX2

RX3RX3

RX4RX4

RX5RX5

RX6RX6

RXINRXIN

DRX1DRX1

DRX2DRX2

DRX3DRX3

DRX4DRX4

DRX5DRX5

DRX6DRX6

DRXIN

DRXIN

TX 1TX 1

TX 2TX 2

TX 3TX 3

TX 4TX 4

RESETRESET

R(FLT)Y(ALM)

G(OPR)

R(FLT)Y(ALM)

G(OPR)

TX 5TX 5

TX 6TX 6

RXRX RXExtRXExt

PWR

IN

PWR

IN

DAntDAnt

Ant Ant

DRXDRX

WARNING! The weight of thisunit isover10kgWARNING! The weight of thisunit isover10kg

99624818






Maintenance

LED STATUS INDICATION TABLE




Plug-inUnits

Switched Onor Reset

Power On andWaiting

SW Downloading Waiting for Configuration / Configuration Ongoing

Operational Status

BOI Red Yellow Blinking Green Blinking YellowRed – Unit Faulty

Yellow – No LapD ConnectionGreen – Unit On and WorkingBlinking Green – SWBackground Loading

DTRU Blinking Green(Later SW Release)

Red – Unit Faulty, CriticalAlarm, Incoming Signal Fault(Abis I/F) or Active Testdisturbing traffic Yellow – Major or Minor Alarmor Test ModeGreen – Unit On and WorkingBlinkin Green – Unit Access

DTRU

RRI LED

Green – Oudoor Unit TX SignActiveBlinking Green – DC Power toCable I/F

BB2 Red Yellow Blnking Green Blinking YellowRed – Unit Faulty Yellow – No LapD ConnectionGreen – Unit On and Working

Blinking Red – Loop Test

TSx Red YellowRed – Unit Faulty or No BB2Connection Yellow – Unit On, Working, annot Transmitting (TX Off)Green – Unit On and WorkingBlinking Red – Loop Test






Plug-inUnits

Switched Onor Reset

Power On andWaiting

SW Downloading Waiting for Configuration / Configuration Ongoing

Operational Status

BTx

RTx Red Blinking Green Blinking YellowRed – Unit FaultyBlinking Yellow – TuningCavitiesGreen – Unit On and Working

DVx Red – LNA Faulty Yellow – Minor LNA Failure

Green – LNA On and Working

PWS Red – Power Supply Alarm Yellow – Standby or RemoteControlGreen – Unit Switched On andWorking

BATA Blinking Yellow(Address Switch at

Broadcast, not allowed)

Red – Unit Faulty Yellow – Unit Plugged-in butMains Power is Off or No CCUA

ConnectionGreen – Unit On and Working

CCUA Red – Unit Faulty Yellow – Support CabinetAlarm, No Q1-SSS ConnectionGreen – Unit On and Working


ESD ANTI STATIC WRIST STRAP



ESD ANTI-STATIC WRIST STRAP

X2CABINET OUTPUT 1X2CABINET OUTPUT 1 X8EXTERNAL ALARMS INPUTSX8EXTERNAL ALARMS INPUTSQ1_1Q1_1 Q1_SSSQ1_SSS

X2CABINET INPUT 1X2CABINET INPUT 1 X9EXTERNAL ALARMS INPUTS/CONTROL OUTPUTSX9EXTERNAL ALARMS INPUTS/CONTROL OUTPUTSQ1_2Q1_2

Alligator clip

A A

Wr ist str ap

Front of cabinet

NOTE:

A = Location of alternate grounding boltsin each forward corner, behind front flange 00111124

Threaded grounding bolts,behind front flange (2x)

Use of ESD Anti-static Wrist Strap

Documents

95_Ultrasite Commisioning Class