900 Series Ins

7/30/2019 900 Series Ins

1/23

Model: 9008 / 9008S / 9012

9013 / 9040ImportantPlease check your model against theamendments at the back of this booklet before aempng

Installaon

Assembly & Fing Instrucons

For the latest fing instrucons please visitwww.insigniarange.co.uk

Contents

Introducon 3

Electrical Requirements 5

Tools Required 6

Whats in the boxes 7

Staring the Installaon 11

Connecng The Shower Accessories 23

Electric Connecons 26

Water Connecons 27

Product Tesng 33

Tesng for Leaks 38

Safety 39

Warranty Informaon 40

Spare Part 41

Troubleshoong, Help & FAQs 42

AmendmentsImportant 43

7/30/2019 900 Series Ins

2/23


ASSEMBLY AND SIMPLE PLUMBING

THIS PRODUCT BUILD IS RATED SUITABLE FOR DIY PURPOSESPROVIDING THE CUSTOMER IS OF ABOVE AVERAGE SKILLS AND

FEELS CONFIDENT IN THEIR ABILTY. ONLY YOU THE CUSTOMER

WILL KNOW THIS SO BEFORE ANY ATTEMPT IS MADE TO ASSEMBLY

READ THROUGH THE FOLLOWING PAGES IN DETAIL THEN DECIDE.

IF YOU HAVE ANY DOUBT USE THE SERVICES OF A PROFESSIONAL.

IN PICKING SUCH, ALLOW THEM TO DECIDE IF THEY ARE CAPABLE

OF BUILD BY FIRST SHOWING THESE INSTRUCTIONS TO THEM. AL-

WAYS GET THREE QUOTES.

REMEMBER THE BEST IS NOT ALWAYS THE CHEAPEST!

REMEMBER PLUMBERS PLUMB! 90% OF THIS JOB IS NOT

PLUMBING!

ELECTRICAL CONNECTION TO HOUSE MAINS

WHEN YOUR ITEM IS ASSEMBLED ALWAYS USE THE SERVICES OF AFULLY QUALIFIED ELECTRICAL COMPANY TO COMPLETE CONNEC-

TION FROM SHOWER TO HOUSE SUPPLY. LAWS DEMAND IN MANY

CASES YOU DO THIS AND YOUR WARRANTY IS VOID REGARDS

ELECTRICAL ITEMS IF THIS IS NOT UNDERTAKEN.

YOURS AND OTHERS SAFETY IS PARAMOUNT. NEVER ATTEMPT

THIS YOURSELF.

DUE TO THE NATURE OF THIS PRODUCT WE HIGHLY ADVISE THE

PURCHASE AND FITTING OF A WATER SOFTENER


Thank you for your recent purchase of an Insignia steam shower.

Please read this booklet with great care to ensure you get the

best out of your build and have a shower that will last for manyyears to come!

Like everything, in order to obtain a first class product that will

serve you well for many years, the effort and correctness put into

the assembly will reflect in the quality of your finish. First remem-

ber what you need from your new item then remember this as

you build. The result will only be as good as the assembly!

OUR BADGE RATING IN TERMS OF DIFFICULTY OF ASSEMBLY

BASED ON

CLIENT FEEDBACK

1 Badge = Very easy

2 Badges = Easy

3 Badges = Moderate4 Badges = Harder than average

5 Badges = Professional skills required

This shower is rated 3 Badges

3 4

7/30/2019 900 Series Ins

3/23

7/30/2019 900 Series Ins

4/23

Whats In The Boxes?

Please check with pictures, some of the items have been assem-

bled by ourselves in order for ease of recognion as to what they

are and can be used as reference in later construcon

1. Shower tray2. Roof secon

3. Shower waste (part of fing kit if purchased)

4. Overhead shower head fied (loosely)

5. Shower hand held

6. Ozone box

7. 2 x screw packs

8. Foot Spa9. Glass shelf pack

10. Extractor fan (fied)

11. Brass nut

12. Hand shower riser bar

13. Shower hose

14. Foot Spa flexi hose

15. Operaons handbook (not required all contained in write up)

16. 90 degree elbow for hand shower feed

Note: Protecve film should be removed

Before starng the installaon!

For the latest fing instrucons please visitwww.insigniarange.co.uk For the latest fing instrucons please visitwww.insigniarange.co.uk7 8

7/30/2019 900 Series Ins

5/23


Glass pack

2 x curved doors1 x door handle pack

Lengths of glass seal trim

2 x magnet trim

2 x front upright columns

2 x corner columns

2 x door seals


Rear glasses x2 and 2 x top and boom curve supports

9 10

Centre control column,

grab handle and back

seat rest.

7/30/2019 900 Series Ins

6/23

For the latest fing instrucons please visitwww.insigniarange.co.uk For the latest fing instrucons please visitwww.insigniarange.co.uk

VERY IMPORTANT

Have you got everything? If not please contact your supplying deal-er now. Remember NEVERbook your tradesman unl everything

has arrived, been checked and is present. No replacement / miss-

ing parts can obtained free of charge during or aer build only

within the mescale permied (48 hours aer delivery) and always

BEFORE build.

GOT EVERYTHING AS YOU SHOULD?

GREAT NOW FOR BUILD PLEASE READ ON!

TO START.

Make sure you have a clear space, remember when finished and in

place you need access to check your build and able to pull the

shower out should you need to replace anything!

Take the shower tray remove all protecve wrapping and fit waste.If you purchased the fing kit it is possible this could have been

already been fied in the tray hole but please note it will only have

been for transport and will need sealing correctly and alignment

for your house waste. In the side of the waste supplied in the op-

onal fing kit you will noce a spigot not seen on an ordinary

waste. In most cases this is blanked, you need to gently drill this

out now. NOTE: IF YOU PURCHASED A NON STEAM VERSIONSUCH AS 9013 MODEL DO NOT DRILL THIS OUT. This item is for

the steam generator waste and will be connected in instrucons

later.

Now on the surface the shower is to finally rest take the tray and

place accordingly. Level tray with water run off slightly towards the

drain. This is done by adjusng the feet fied underside

11 12

Check Levels both

Note 4 x water run

offs (model varies)

Tray Feet

7/30/2019 900 Series Ins

7/23

When you are happy the tray is set up correctly you can now move

this out to a beer working posion.

Taking now the le hand (as you look from the front) rear wall, it

will have LEFT wrien on it and this will be at the top. Also take

the centre column with appliances aached to it and place on the

shower tray. Now using screws provided aach the centre column

to the le hand wall 4x screws. Having completed this place a fur-

ther 2 x screws through the rear of boom le hand panel into the

tray. Please note slots are cut into channel should you need slight

adjustment. When complete repeat this operaon taking the right

hand panel again marked as the le was and repeat procedure you

have just undertaken. You now have the tray, centre column and

both back walls aached


2 x screws placed through boom of glass frame into shower trayTaking

For the latest fing instrucons please visitwww.insigniarange.co.uk13 14

ABOVE: Applying sealer to inner trim to be stuck to glass section

Screw through pre-cut holesYour shower will now look

like this

7/30/2019 900 Series Ins

8/23

Moving on to the top and boom curved rails and the two upright

aluminium columns. Columns fit on each end of the exposed rear

panel glasses and will form the front part of the shower support.

Take one column (each are marked TOP) and the boom curved

rail, at the boom of each upright you will see two slots, screw the

upright to the curve with screws supplied through slots. Taking the

second column screw this to the opposite end of the curve. NOTE

curve will have the seal built into the frame at the boom. You will

now have two upright columns aached to one curved rail.

For the latest fitting instructions please visitwww.insigniarange.co.uk

Column showing UP

Now offer your assembly onto the front of the shower tray (as pic-

ture 2nd

up) The columns will now fit snug to the end of the glass

rear panels. Note screw holes pre-drilled. Taking appropriatescrews screw the column to the glass panel frame. Repeat this at

the other end.


15 16

Screw column to curve rail not as picture but before it is placed on

tray as the second hole will not be assessable otherwise.

With columns and boom curved rail in place you now need to fit

the side glasses. Taking one glass place seals on them as picture

shows.

7/30/2019 900 Series Ins

9/23

NOTE: 2 x seals press onto glass

When you have placed the seals correctly over glass edges offer

one up to the upright column you have just fixed to the rear glass

frame. Now firmly press into the channel found on the front.


When this stage is complete repeat the same assembly with the

second glass and again firmly press into the other channel.

Now take the 2 x front columns with grey plasc clips aached.

Press one into the opposite end of the glass panel you have just

fixed and over the seal. NOTE. Make sure this is firmly home with

seal in place. When you are sure the front column is correct and

seal fully in place, you now need to fix the top curved rail. Place in

posion carefully insert the top grey clips very carefully so as not

to break them and screw both ends to the top of the end columns

as you did with the boom curved rail.


Column seal and glass press

into channel (shown in red)

Upright front columns now fied before fing top rail

7/30/2019 900 Series Ins

10/23

Offering up the top rail to slot into clips


You now need to fix the two front columns into place. Align the pre

drilled holes and screw into place as the picture below shows:

Picture shows top fixing repeat both sides and at the boom aswell

Now your assembly is almost complete. Just the doors and roof

need fing. Take one door, now fix wheels on this top and boom

but leave all four loose. Fit door handle also. On the leading edge

fit 1 x magnet strip. On trailing edge fit L shaped steam retaining

seal. When complete offer the door into the channel runners andnote the wheels are on cams adjust each unl the door runs

smoothly. Repeat the same procedure on the second door. NOTE

get magnet round the correct way the two doors need to aract

not repel! NOTE. Any gap between the doors can now be adjusted

to close perfectly by adjusng the second door wheel cams to

align.


Screwing top curved rail

into place

Shower top curve

secon will now look like

this

7/30/2019 900 Series Ins

11/23


Top door wheels in place note cam adjustment

Now taking the complete roof secon make sure the overhead rain

shower is ght and offer over the structure to fit inside frame sup-

port. When in place screw through pre drilled holes.


2 x boom wheels in runner

Magnets fied to doors to aract each otherPlace over shower frame

7/30/2019 900 Series Ins

12/23


Align in place for snug fit

Screw into place

You now need to fit all internal items supplied inside the show-

er cabin. These are for 9040, 9008, 9012, 9013 models

Hand shower riser bar,

flexi hose and actual hand shower

Handle grab

Press rear seat back rest on knobs supplied (NOTE: 9040 model

has no seat or back rest)

Foot spa and hose

Assemble chrome rack

All of which are self explanatory but picture below can be used

again to check locaon.

Congratulaons nearly finished, you are now ready to couple wa-

ter hoses!

7/30/2019 900 Series Ins

13/23

Seal where shown in red on assembly!

- Not aer


Electric Connecons.

At this stage you will need to connect the following. These are all12V and considered safe for DIY connecon as each is labelled

and low voltage.

NEVER CONNECT TO MAINS AT THIS STAGE

Overhead light * Led rear panel lights* Ozone (if fied) * Speaker *

fan * Aerial (unfold if fied) * C.D Telephone (if required most do

not bother!) external jacks if required NOTE! If you purchased the

oponal shower tray skirt lights these join to the rear internal led

light connecon.

Idenfy these connecons and snap together with connector

blocks on the end of each. Telephone will need hard wiring from

another socket point in your house

If you have purchased the 9013 model then simply plug in the 12volt adapter aer all the connecons have been made.


25 26

Also run a bead of silicone up the inside rear of the column

7/30/2019 900 Series Ins

14/23

Shower Water Connecons

Going to the rear of the shower, you now have hoses coming fromthe water diverter valve, these are marked as to their locaon.

Connect each to their respecve posions. NOTE Check each con-

necon has a seal in before ghtening fully. Please note overhead

shower shows arrow to le, in fact this goes vercal.


Now remove plasc protecon cover and check all jets are ght.

These are only placed in posion for transport. NOTE: Do not over

ghten! Now check ALLhose clips these will be loose as well, ght-

en unl hose cannot move. Now remove the 3x flexi braided hoses

(Only two if non steam 9013 model!!) and check clear neoprene

washers are in place if all good ghten in posion. At the boom of

the column check the steam pod and ghten this in posion.

Leave plasc protecon cover off.

Check hose clips and ghten all of them. Dont forget braided hos-

es as well!

Double assurance! Silicone behind each jet nut before

ghtening

7/30/2019 900 Series Ins

15/23

What Should I Know About Steam Room Safety?

Please visit the following link:hp://www.insigniarange.co.uk/instrucons/

Steam_Safety_Please_Read.pdf


Connecng the steam generator

Fied at the boom of the shower rear panel (NOT APPLICABLE

TO 9013 NON STEAM MODELS) you will find the steam generator

which will look similar to the picture below. Connect white insu-

lated hose to the shower steam pod. This is located below the

seat in the cabin and connecon is at the rear for ease. Check

now by picture or words wrien on the generator box, Water In

This will connect to the middle braided hose found coupled to the

rear of the water valve you just ghten connecons to. Finally if

the fing kit was purchased couple the last connecon which is

Steam Generator water waste This goes from the generator to

the shower tray spigot menoned at the earliest stage

(Remember? You drilled this out!). If no waste purchased you will

need to make your own arrangements to connect somewhere

else into the house waste or call 0844 800 3069 to order the spe-

cial waste. Remember to ghten all connecons

See typical set up overleaf..

Checked neoprene seals are in

posion?

Water In

Drain/Water Out

Steam Out

Important!

Never use the steam

generator with the vent

holes poinng towards

the shower wall or a

person.

Never use the steamoutlet in the closed posi-

on. This excessive heat

will damage your tub

and this is NOT covered

under your warranty

terms.

7/30/2019 900 Series Ins

16/23

7/30/2019 900 Series Ins

17/23

TESTING PRODUCT.

With the shower sll not fully posioned as you will require it.

Complete the following tests:

Electrical. Switch unit on and test all features contained. Lights,

Ozone if fied, radio, TV, underwater light, fan. Below is a copy of

the control panel and what each feature operates


1. On/Off Switch

2. Radio frequency

3. Volume seng

4. Steam Unit operaonPress this buon to acve the steam

funcon. If no water is present the unit will not funcon for safety

reasons.

5. Light Operaon

6. Telephone answerPress to answer the phone if connected.

7. Volume/tune up

8. Panic Alarmpress to acve, then turn the unit off by buon 1

to turn it off.9. Staon memory. Press this to select your preset staons be-

tween 1-10. If you are turning your radio, once you have the sta-

on selected press Mem to assign a preset staon. Keep pressing

the Mem buon unl you have selected the required present

staon number. Now leave it to stop flashing to preset the staon.

10. LockThe lock will turn on automacally. To disable hold

buon for 3/4 seconds and the padlock display will change to anopen icon.

11. SetSwitches between tune and volume

12. Switches between the radio and the CD player (if fied) or

turns both off.

13. Ozone acvaon (If Fied) Run this feature for 10-15 minutes

to clean the shower cabin.

14. Fan operaon

15. Control panel lock icon on/off

16. Room Temperature sensor

17. Light display icon


9

7/30/2019 900 Series Ins

18/23

CONTROL PANEL FOR NON STEAM 9013 MODEL


1. On/Off Switch

2. Light On/Off

3. Rear internal Led lights and tray lights if fied

4. Fan Operaon

5. Radio Operaon

6. Volume Up

7. Volume Down

8. Reset The radio

9. Tune

10. Telephone Answer


12

34

5

6

7

8

9

10

7/30/2019 900 Series Ins

19/23

Your completed shower should now look like this:


TESTING FOR WATER LEAKS

LEAVING SHOWER 24 HOURS AFTER BUILD ALLOWING SEALENT TO

CURE HAVE YOU BUILT THIS CORRECTLY? FIND OUT NOW.

With all connecons ght, the waste and hoses checked, jets fully

sealed, your shower sll around18 inches from its designated final

resng point and the silicone sealer fully cured (hence leaving for

24 hours at min) Switch on the overhead shower NOT massage jets

remember these will fire water out at you and are not suitable forchecking leaks as they would normally only operate when a person

is fully in front of them. Just use COLD water seng as hot will

make cabin misty and condensate thus the inspecon becomes

very difficult. Now on the OUTSIDE inspect each joint, factory seal,

hose, clip, jet, from one side going round to the back and then oth-

er side finishing at the front. If you have a small leak (normally

caused through insufficient sealer or air bubble on assemble. Dryarea thoroughly and reseal on the OUTSIDE. Again remember

where you see water may not be exactly where the leak is, it could

have run round to a low point. Never seal anything inside unless

you feel it necessary and make sure it is thin and neat, remember

you will see this for the life of your shower! Leave to cure again

and check. If all good now check shower funcons, Jets for back

massage, foot massage, (if you have one) and finally hand shower,

check your joints to these funcons at the rear again. Never use

the shower unl all checks have been made and the installer is

100% happy in the knowledge no leaks are present. All good? Now

push your shower FROM THE BASE NEVER GLASS OR FRAME into

its final resng posion. Now you can shower in the knowledge

that you have no leaks a job done well and long product life.

For the latest fitting instructions please visitwww.insigniarange.co.uk37 38

9008 / 9008S / 9012 / 9013 9040

7/30/2019 900 Series Ins

20/23

7/30/2019 900 Series Ins

21/23

7/30/2019 900 Series Ins

22/23

7/30/2019 900 Series Ins

23/23

For the latest fitting instructions please visitwww.insigniarange.co.uk For the latest fitting instructions please visitwww.insigniarange.co.uk43 44

Amendments

It may be apparent that you have the latest model which is a click

clack style build. It is important to recognise this as when it comes

to building the shower, once you have the tray in place you need

to build the front glass frame first than click the rear panels in to

place followed by the column last. If you fail to follow this instruc-

on your build will be incorrect and you will have to start again!

To recognise if you have the correct model please check the follow-

ing:

Does your metal up-

rights have a grove on

the framework as

shown below? If so

then you Must follow

the instrucons above

in connecon with thebooklet. if you do not

have this grove then

please follow the

booklet from the be-

ginning ignoring this

amendment.

Documents

900 Series Ins