9 - May 13 Newsletter - ASQ - · PDF file• Able to perform inspection checks with a caliper, micrometer, shadowgraph, comparator, ... - prepares clear explanatory documents such

Open Forum Section Meeting

Just as we have done for the last meet in the previous few years we are planning an “Open forum” style meeting for our section this month. This will be slightly different than our normal, “Presentation style” meetings.

Members of the board will review a variety of topics including a section financial update The review will include a an interactive Q&A session open to all attendees answering questions related to any national or sectional ASQ inquiries……..

The evening will include a British Style Beer Sampling and a Wine Tasting.

This is a great opportunity for the board to receive feedback andquestioning from the section which will be used to enhance the section and section activities to be of greater benefit to the members.

NOTE: If you have any specific topics you wish to have discussed or addressed by the board please note them when you make your

Section 1205www.asq-rockford.org

May 2013 Volume 9, Issue 9

Hosted by: Hope and Anchor & the Section 1205 Board Members

www.asq-rockford.orgwww.asq-rockford.org www.asq-rockford.org

Reservations due to Cora Schroeder by - - - - 5:00 p.m., Friday, May 10th Phone: 815-484-2176, e-mail: [email protected]

Menu :

Dinner Cost: $25.00

Agenda:When: May 16th 5:30 – Networking6:00 – Presentation6:30 – Wine Tasting / Beer Sampling & Buffet

Where:

NOTE: Online reservations will be via email directly to Cora. Please include in the email if you plan on

attending the dinner as well as the # of guests that will be attending and the menu selection for each attendee.

Hope & Anchor English Pub5040 N 2nd Street, Loves Park, IL815.633.2552

reservations.

Buffet that includes two styles of wings, Pulled Pork Poutine, Guinness BBQ crispy fried Ribs, Scotch Eggs with English Mustard, Imported cheese, chutney & Biscuits, a veggie tray, chips 'n dip and a plate of sweets.

Presentation Only: FREE

Beers WinesFullers Esb William Hill Estate ChardonnayAbbot English Ale Salmon Creek Pinot GrigioSamuel Smith Nut Brown Ale Rosenblum ZinfindelTetleys English Ale PKNT Chilean Pinot NoirRoss-On-Wye- Rum Barrelled Cider Red Rock MerlotYoungs Double Chocolate Stout Canyon Road Cabernet Sauv

American Society for QualityASQ Section 1205P.O. Box 8055Rockford, IL 61125www.asq-rockford.org

Placement Opportunities….. Check out the website for up to date listings.

Quality Control Supervisor: Rockford, IL

Role Description/Summary:This position is responsible for planning tests and inspection of products at various stages of the production process and compiling and evaluating statistical data to determine and maintain quality/reliability of products. Other responsibilities include supervising departmental personnel and functions along with training, monitoring work flow and assure that quality/safety standards are met. This position reports directly to the Quality Manager.

Major Responsibilities:• Assigns work per production schedule and monitors departmental efficiency.• Has primary responsibility for departmental training and safety.• Exercises judgment in making decisions concerning quality, from raw material through finished product.• Works closely with other departments to optimize production processes.• Has primary responsibility for customer sample submission requirements.• Has primary responsibility for preventative maintenance and condition of equipment.• Writes performance appraisals and gives performance reviews.• Assists in planning equipment needs and determining capital expenditures.


• Participates in interviews of job candidates.• Verifies attendance and performance records using computer system.• Completes personnel documentation, including accident reports, disciplinary actions, etc.• Assists in planning work schedules.• Orders and maintains inventory of necessary gauging.• Responsible for efficient movement of production components through department.• Assists as needed to meet schedules and satisfy customers, including completion of corrective actions.• Responsible for follow‐up review of corrective action plans.• Initiates and assists in project coordination, both internal and external, for continuous quality improvement.• Has responsibility to complete associated training classes

Qualifications / Requirements: • High school diploma or equivalent required. Supervisory experience preferred.• ASQ certified or equivalent required. CQT (Certified Quality Technician) or CQE (Certified Quality Engineer) desired.• Ability to interpret blueprints and possess GD&T skills.• Able to perform inspection checks with a caliper, micrometer, shadowgraph, comparator, automated inspection equipment and other gauging devices.• Must have excellent communication skills, decision‐making and problem‐solving abilities.• Experience with Microsoft Office and other statistical software programs.• Experience with metrology practices.• Experience with root cause investigation, statistics and Production Part Approval Process (PPAP).• Background knowledge of ISO 9000, ISO 13485 or TS (automotive) standards

Mental Demands: • Perform multiple tasks simultaneously.• Keep up with all documentation.• Respond to frequent interruptions.• Plan and organize departmental functions.• Respond to changing priorities.• Consistent leadership style.• Act as liaison with all departments, keeping them abreast of quality problems, program priorities, process audits and other information which may relate to their areas.• RSC quality liaison with vendors and customers.

Benefits / Salary: Rockford Spring offers a competitive benefits package that includes health coverage, company matched 401(K), profit sharing and paid time‐off for holidays, vacation and illness. Salary is based on qualifications and experience.

Contact information:Interested candidates should submit their resumes to Dave Lester at [email protected] or call 815‐968‐3000 extension 714



Corporate Director of Quality: Cary, IL

Purpose Statement:

Automotive Quality Engineer: • Perform quality system maintenance, root cause analysis and implementation of corrective actions.• Develop continuous improvement activities to enhance the quality system, such as 5S, Kaizen, lean methods• Ensure product conformance to specifications.• Root cause analysis and implementation of corrective actions.• Maintain PFMEAs Control plans and TS16949 documentation• Must have strong experience with PPAP's, Control Plans, SPC, 8D, Corrective Actions.• Knowledge of APQP• Must be someone who can work on the floor, this is not a sit behind the desk position.• Must be comfortable with dirty environment.• Pay can go up to 35/hr.

Contact information:Lorri Kaczmarski [email protected] (847) 273-1542


Purpose Statement:A Quality Director coordinates the activities required to meet quality standards; monitors and advises on the performance of the quality management system; and produces data and reports on performance, measuring against set indicators. This position interfaces with other managers and staff throughout the organization to ensure that the quality system is functioning properly. Where appropriate, the quality manager/director advises on changes and their implementation and provides training, tools and techniques to enable others to achieve quality.

Job Responsibilities:-promotes quality achievement and performance improvement throughout a global multi-plant, multi-cultural organization;- sets QA compliance objectives and ensures that targets are achieved;- maintains awareness of the business context and company profitability, including budgetary control issues;- assesses the product specifications of the company and its suppliers, and comparing with customer requirements;- works with purchasing staff to establish quality requirements from external suppliers;- ensures compliance with national and international standards and legislation;- establishes clearly defined quality methods and standards for staff to apply;- defines quality procedures in conjunction with operating staff;- sets-up and maintains controls and documentation procedures;- identifies relevant quality-related training needs and delivers training;- analyzes performance data and charts against defined parameters;- ensures tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary;- supervises technical staff in carrying out tests and checks;- brings together staff of different disciplines and drives the group to plan, formulate and agree comprehensive quality procedures;- liaison with customers' auditors and ensures the execution of corrective action and compliance with customers' specifications;- establishes standards of service for customers or clients;- prepares clear explanatory documents such as customers' charters;- monitors performance by gathering relevant data and producing statistical reports.

Requirements: -Bachelor's Degree in Engineering or equivalent; MBA is desirable- 10-15 years experience in a senior quality management role - 5+ years experience in company-wide ISO/TS16949 environment- Experience in an manufacturing environment is required- Proficient in data collection, analysis and presentation- Excellent computer skills and proficiency- Proficient in ISO/TS16949 standards- Familiarity with environmental standards such as ISO14000, RoHS, Halogen standards, Reach, etc.- Familiarity with SA800.

Contact information:Amy Zorica [email protected] 847-516-5540



Quality Manager: Madison, WI

Would you be interested in a role where your relationships with offshore suppliers, expertise in negotiations and your ability to make the right decisions is valued? If so we would like to consider you for this highly impactful analytical opportunity.This role will provide leadership of Product Quality improvement initiatives and Quality System activities required in the development, manufacture and sourcing of small kitchen electric consumer products under leading brands such as Black and Decker and George Forman. This role works closely with New Product Development, our Product Engineering Center (Shenzhen based) and suppliers to coordinate and monitor corrective and preventative actions to assure that effective solutions are rapidly identified, implemented and verified.

Primary Duties and Responsibilities:• Model the Spectrum Brands eight Core Capabilities to achieve service excellence, meet and exceed organizational objectives and support fiscal responsibility.•Create and implement the quality requirements for product specifications.•Drives the use of quality tools in operations and product development to NPD, Engineering and PEC employees.

•Use of Experimental Design, Problem Solving, Quality Function Deployment, Process Control , Gauge Control•Develops and delivers Quality Engineering procedures and practices to the NPD, Engineering and PEC employees. Responsible to content, creation and delivery. Ensures content is up to date and meets product specifications.•Assists in resolving major quality issues. Must pro-actively communicate issues up and down the organization to prevent business surprises. Must be able to successfully manage Quality issues with Retail Customers to assure customer satisfaction and the success of the


surprises. Must be able to successfully manage Quality issues with Retail Customers to assure customer satisfaction and the success of the business.•Ability to implement LEAN/Six-Sigma methodologies to bring quality issues to resolution•Will provide indirect leadership of diverse teams of technical, suppliers and marketing professionals to achieve assigned objectives.

•Position requires expert knowledge in Quality Engineering and Quality Assurance systems.•Proven leadership skills and abilities.•Very strong analytical/problem solving skills and decision making/negotiation skills are required.•Excellent communication skills both oral and written, with the ability to quickly and positively influence others• ASQ CQM, CQE, CQA certifications preferred.•Familiarity with Design for Six Sigma / Lean Manufacturing techniques preferred.•Demonstrated leadership of successful ISO 9000 or QS 9000 registration activity preferred.•Proficient in Microsoft office products.•Expert knowledge of analytical problem solving , decision making and negotiation skills.•Ability to travel approximately 20% domestically and internationally. •Bachelor’s Degree (Mechanical or Electrical Engineering) required, a graduate technical degree / MBA helpful.•Minimum of 5-7 years’ experience of directly related technical experience in quality/operations required.•Experience with consumer products and related design/manufacturing processes (plastics, heated products, electrical components, cosmetic appeal, packaging, etc.) preferred.

For consideration please apply directly at www.spectrumbrands.com

For more opportunities visit the ASQ National website at:http://careers.asq.org/jobs


Section 1205 Certification accomplishments

ASQ CERTIFICATION Exam Dates

CQT, CQI, CRE, CBA, CHA, CMQ/OE, CSSBB, MBBExam Dates Application Deadline Late Application Fee DeadlineOct 5, 2013 Aug 16, 2013 Aug 21, 2013March 1, 2014 Jan 10, 2014 Jan 15, 2014Oct 4, 2014 Aug 15, 2014 Aug 20, 2014March 7, 2015 Jan 16, 2015 Jan 21, 2015Oct 3, 2015 Aug 14, 2015 Aug 19, 2015

CQA, CQE, CQIA, CSQE, CSSGB, CQPA, CCT, CPGP Exam Dates Application Deadline Late Application Fee DeadlineDec 7, 2013 Oct 18, 2013 Oct 23, 2013June 7, 2014 April 18, 2014 April 23, 2014Dec 6, 2014 Oct 17, 2014 Oct 22, 2014June 6, 2015 April 17, 2015 April 22, 2015Dec 5, 2015 Oct 16, 2015 Oct 21, 2015

EXAMINATION DATES:Your application must be postmarked, faxed, or emailed by the extended application deadline.Applications sent after the extended deadline will automatically incur an additional, non-refundable, $50.00 late registration fee.Applications received after the late application deadline will automatically be processed for the next examination date.


Section 1205 Certification accomplishments

ASQ certification is formal recognition by ASQ that an individual has demonstrated a proficiency within, and comprehension of, a specific body of knowledge. Nearly 150,000 certifications have been issued to dedicated professionals worldwide.

Section 1205 would like congratulate the following individuals for their accomplishment of receiving the certifications indicated below.

CSSGB CSSGB - Certified Six Sigma Green Belt CSQECSQE - Certified Software Quality Engineer

- Siraj Shaik - Nereida Ocasio

CQT CQT - Certified Quality Technician CQECQE - Certified Quality Engineer

- Alex F. Kubicek - Maria Verginia Cilli

CMQ/OECMQ/OE - Certified Manager of Quality / Organizational Excellence

- Francisco C. Garcia

Certification AssistanceIf you are studying for a certification exam and would like a mentor to help you, contact Tom Hall ([email protected] or 262-374-5923) – or – If you are certified and would be willing to act as a mentor contact Tom as well.


Reminder: Changes to your ASQ membership account, including email and other contact information

Need help convincing management that Quality matters?Why not improve your speaking skills in 2013?

Learn to express yourself better, either in a speech or thinking-on-your feet.

You’re invited to come to our next Blue Blazers Toastmasters club meeting.

We meet every 1st, 3rd, and 5th Thursday during lunch (12PM-1PM) & all are welcome. We’d love to see you there!

Meetings are held at Hamilton Sundstrand, 4747 Harrison Ave, Rockford, IL 61109: come to the North Lobby by 11:50AM (to allow time to get to our room).

Call Shanasy Bratt at 815-968-6860 if you have any questions, or to let us know you’re coming so we can look for you.

The mission of our Toastmasters Club is to provide a mutually supportive and positive learning environment in which every member has the opportunity to develop communication and leadership skills, which in turn foster self-confidence and personal growth.


Board Meetings

Section Dinner Meetings

ASQ Re-Certification

1st Thursday of Every Month (Sept - May) Singapore Grill, Loves Park

3rd Thursday of Every Month (Sept – May) December meeting is 2nd Thursday)

Send to Mike Farrell Seward Screw Products 16377 Third St. Seward, IL 61077

General Information Section

Reminder: Changes to your ASQ membership account, including email and other contact information

should be made through ASQ National on the website at www.asq.org or by calling 800-248-1946

+/- 1 σ+/- 2 σ+/- 3 σ

+/- 5 σ+/- 6 σ

+/- 4 σ

+/-1 σ 68% 967700 ppm 0.33 Cpk+/-2 σ 95.4% 308000 ppm 0.66 Cpk+/-3 σ 99.73% 66800 ppm 1.00 Cpk+/-4σ 99.994% 6210 ppm 1.33 Cpk+/-5 σ 99.9999% 230 ppm 1.67 Cpk+/-6 σ 99.99999% 3.4 ppm 2.00 Cpk


Board Members Name Phone Email

Past Chair / Nominating Jim Akers 815-639-6454 [email protected]

Chairman Vice Chairman Treasurer SecretaryDiane Konopa Mark De Pasqua Paul Hermanns Linda Ward

815-484-8955 815-639-6258 321-544-3484 815-323-1469

[email protected] [email protected] [email protected] [email protected]

2012-2013 Board of Directors


Past Chair / Nominating Jim Akers 815-639-6454 [email protected]

Arrangements Cora Schroeder 815-484-2176 [email protected]

Certification Art Bird 815-233-1598 [email protected]

Membership / Database Brian Tracy 815-222-3947 [email protected]

Publicity Zac Paeth 847-221-1338 [email protected]

Placement Bruce Kyles 815-721-9145 [email protected]

Audit Donna Riggs 630-365-5672 [email protected]

Education Tom Hall 262-374-5923 [email protected]

Examining (Recertification) Mike Farrell 815-247-9181 [email protected]

& Historian

Internet Liaison Jeff Moore 414-791-6992 [email protected]

Member/s at Large Gordy Skattum 815-520-5757 [email protected]

Roy Ervin 815-966-8271 [email protected]

Leslie Regenold 815-389-5542 [email protected]

Steve MacDougall 815-270-0429 [email protected]

Sr. Advisory Barry Beaman 815-234-8558 [email protected]

Art Bird 815-233-1598 [email protected]

Seminar/Scholarships Linda Ruggerio 815-315-3641 [email protected]

Newsletter / VoC Mike Aston 608-743-2887 [email protected]

Other Contacts Name Phone Email

Regional Director Steven Schuelka - - - - - - - - - - [email protected]

Deputy Regional Director Annette Borrelli - - - - - - - - - - [email protected]

Deputy Regional Director Mohammad A. H. Khan - - - - - - - - - - [email protected]

ASQ National Office Cust. Service 800-248-1946 [email protected]



This Page Intentionally left Blank

Documents

9 - May 13 Newsletter - ASQ - · PDF file• Able to perform inspection checks with a caliper, micrometer, shadowgraph, comparator, ... - prepares clear explanatory documents such