Upload
sumeet-sourabh
View
224
Download
0
Embed Size (px)
Citation preview
8/10/2019 8501351 Analysis on Indian Steel Industry
1/22
PRAXIS BUSINESS SCHOOL
(001)
(0035)
8/10/2019 8501351 Analysis on Indian Steel Industry
2/22
CONTENTS
THE GLOBAL STEEL INDUSTRY 3
THE STRUCTURE OF INDIAN STEEL INDUSTRY 4
CONSUMPTION OF STEEL INDIA 5
SUPPLY OF STEEL IN INDIAN MARKET 11
SUPPLY DEMAND MISMATCH 12
MARKET SHARE OF DIFFERENT 13
COMPETETION ANALYSIS 15
MERGERS AND ACQUISITIONS 16
EXPECTED GROWTH 17
FACTORS HOLDING BACK THE INDIAN STEEL INDUSTRY 19
OUTLOOK 21
8/10/2019 8501351 Analysis on Indian Steel Industry
3/22
THE GLOBAL STEEL INDUSTRY
The current global steel industry is in its best position in comparing to last
decades. The price has been rising continuously. The demand expectations forsteel products are rapidly growing for coming years. The shares of steel
industries are also in a high pace. The steel industry is enjoying its 6th
consecutive years of growth in supply and demand. And there is many more
merger and acquisitions which overall buoyed the industry and showed some
good results.
The subprime crisis has lead to the recession in economy of different
countries, which may lead to have a negative effect on whole steel industry incoming years. However steel production and consumption will be supported by
continuous economic growth.
CONTRIBUTION OF COUNTRIES TO GLOBAL STEEL INDUSTRY
8/10/2019 8501351 Analysis on Indian Steel Industry
4/22
The countries like China, Japan, India and South Korea are in the top of the
above in steel production in Asian countries. China accounts for one third of total
production i.e. 419m ton, Japan accounts for 9% i.e. 118m ton, India accountsfor 53m ton and South Korea is accounted for 49m ton, which all totally becomes
more than 50% of global production. Apart from this USA, BRAZIL, UK accounts
for the major chunk of the whole growth.
STRUCTURE OF INDIAN STEEL INDUSTRY
The steel industry in India is concentrated in the east, south and west of thecountry. The integrated foundries are located in the east, while electric steel is
produced predominantly in the south and west. In the future the east will see
rapid expansion as more integrated capacities are being built in Orissa and other
eastern states due to its raw materials.
Although India is now one of the worlds top ten steel producers, its domestic
output is insufficient to meet the demand in all segments. Imports increased in
2005 by 8% and it is likely that India will continue to import in many segmentsover the medium term. According to Deutsche Bank Research,1 the three biggest
steelmakers in India have a combined output of almost 20 million tons and have
a domestic market share of 51%. Their domestic competitors are numerous me-
dium-sized and smallish companies and more mergers can be expected between
these companies as these firms need to improve their position with regard to the
powerful suppliers of raw materials.
8/10/2019 8501351 Analysis on Indian Steel Industry
5/22
CONSUMPSION OF STEEL IN INDIA
Driven a booming economy and concomitant demand levels, consumption of
steel has grown by 12.5 per cent during the last three years, well above the 6.9
percent envisaged in the National Steel Policy.
Steel consumption amounted to 58.45 mt in 2006-07 compared to 50.27 mt in
2005-06, recording a growth rate of 16.3 per cent, which is higher than the
world average. During the first half of the current year, steel consumption has
grown by 16 per cent. A study done by the Credit Suisse Group says that India's
steel consumption will continue to grow by 17 per cent annually till 2012, fuelled
by demand for construction projects worth US$ 1 trillion.
The scope for raising the total consumption of steel in the country is huge, as
the per capita steel consumption is only 35 kgs compared to 150 kg in the world
and 250 kg in China.
With this surge in demand level, steel producers have been reporting
encouraging results. For example, the top six companies, which account for 70
per cent of the total production capacity, have recorded a year-on-year growth
rate of 13.4 per cent, 15.7 per cent and 11.7 per cent in net sales, operatingprofit and net profit, respectively, during the second quarter of 2007-08
We expect strong demand growth in India over the next five years, driven by a
boom in construction (43%-plus of steel demand in India). Soaring demand by
sectors like infrastructure, real estate and automobiles, at home and abroad, has
put India's steel industry on the world steel map.
8/10/2019 8501351 Analysis on Indian Steel Industry
6/22
YEAR WISE DEMAND OF INDIAN STEEL INDUSTRY
( ) %
20002001 34.444
20012002 36.03 4.625
20022003 40.41 12.32
20032004 43.62 6.4
20042005 45.3 5.4
20052006 50.25 10.32006200 5.45 16.3
GRAPHICAL REPRESENTATION OF GROWTH AND DEMAND OF INDIAN STEEL
INDUSTRY
8/10/2019 8501351 Analysis on Indian Steel Industry
7/22
MAJOR CONSUMERS OF INDIAN STEEL INDUSTRY
Support from dynamic economy
India is the economic region that has enjoyed the worlds most sustainedboom. The Deutsche Bank Research Formel-G econometric model forecastsaverage real GDP growth of 5.5% p.a. for India between 2006 and 2020 Ofollowed by Malaysia (5.4%) and China (5.2%). In all, the analysis covered34 economies that generate some 85% of global GDP. The growth driversare population growth, human capital, opening of the economy and risinginvestment. Despite the sharp increase in Indias population, per-capita
GDP in purchasing power parity terms should rise by nearly 4% peryear until 2020. Since the model does not take sufficient account of thecountrys major initiatives in the infrastructure area, average growth until2020 might turn out to be even closer to 6%. In fact, by the end of thedecade India could replace Japan as the worlds third biggest economyafter the US and China
Positive stimuli from construction industry
The steel companies are pinning their hopes largely on the expandingconstruction industry. The industry is one of the key drivers of Indiaseconomic growth. Up to 10 million new homes need to be built each yearuntil 2030. Strong population growth, rising incomes and decreasinghousehold sizes are forcing comprehensive measures to be taken in thehousing sector. The pent-up demand for housing is estimated at around 20million units by the Indian Construction Association; the Ministry for UrbanDevelopment and Poverty Alleviation claims that no less than 31 million
dwellings are needed. The hosting of the Commonwealth Games in NewDelhi in 2010 should generate additional stimulus for the constructionindustry and thus boost demand for steel. In addition to the sports facili-ties, accommodation for competitors and visitors is planned. The govern-ment has announced that some 40 hotels with a total of 15,000 beds areto be built. The Indian office market is benefiting from the ongoing off
8/10/2019 8501351 Analysis on Indian Steel Industry
8/22
shoring activities of industrial nations. Indian insurers are concentrated inthe software development and software product segments. Their secondmain business area is assuming the responsibility for entire supportprocesses, or business process outsourcing (BPO). These segments still
look set for growth.6 Furthermore, the construction sector is benefitingfrom major infrastructure projects. Capital expenditure is to be focused onroad building and the rail network, as well as on the construction and ex-pansion of ports and airports
Strong growth in mechanical engineering
Mechanical engineering output has increased some 10% p.a. over the pastfive years. Thanks to the march of technological progress the prospects fordomestic suppliers should improve going forward, while import growth isslightly crimped. Demand is greatest for building machinery andplastic-moulding machines as well as machine tools and textile machinery.Since the domestic textile and apparel industry, for example, is focusingfurther up the value chain, firms have to make numerous investments inmodernising and expanding their machinery portfolios Makers of buildingmachinery are benefiting from the large-scale infrastructure projectsplanned by the Indian government, while machine-tool makers are beingbuoyed by the upturn in the automobile and auto parts industries forexample. Exports by the Indian mechanical engineering industry roserecently by nearly 30% to USD 10 bn. By comparison, German mechanicalengineering firms exported products worth close to USD 117 bn, includingmachinery to the value of about USD 1 bn to India. Germany claims aparticularly large share of Indian imports of Woodworking machinery andmachine tools as well as pumps and compressors. The demand for foreignmachinery comes from customers requiring especially high standards ofperformance and precision. The Engineering Exports Promotion Council(EEPC) forecasts that Indian exports will be worth USD 30 bn (+32% p.a.)by 2008; nevertheless the volume is still very low by internationalstandards.
8/10/2019 8501351 Analysis on Indian Steel Industry
9/22
Booming automobile industry
The automotive industry may consume a relatively small proportionof steel
output, but its growth rate is the highest of the mostimportant clients forthe steel industry. In India a small but flourishingautomobile industry has
now developed that sees its future primarilyin the budget price segment
and views the domestic market andother emerging nations as potential
markets.7 Vehicle ownership(cars and trucks) in India at 11 per 1,000
inhabitants are even lesswidespread than in China with its very low figure
of 21. The growthof the Indian automobile industry is being driven by
healthy domesticdemand. The consumption minded, fast-growing middle
class is amajor factor. The continuing increase in incomes and low-costfinancing facilities are boosting sales. However, it is not uncommonfor
cars to be used for 20 years (Western Europe: 12 years), withvehicles that
have been taken off urban roads often being driven forlonger in rural
areas.The populations steadily growing demand for mobility and sharply
rising traffic volumes will continue to generate strong demand forcars in
the future. At the same time Indias automobile sector isestablishing itself
as an exporter to international markets. Hyundai,for example, uses the
country as an export base for small cars, andFord manufactures vehicles
there for South Africa and othermarkets. However, competition between
automakers has intensifiedmarkedly. Whereas in 1995 there were just five
carmakers in Indiathe figure has now reached 10. The biggest are Maruti
Udyog Ltd.,Hyundai Motor India and Tata Engineering (Telco). The Tata
group iseven trying to gain a foothold in the European market with new
models. India currently produces a total of 711,000 cars each year
(Germany: 5.4 million).
8/10/2019 8501351 Analysis on Indian Steel Industry
10/22
SUPPLY OF STEEL IN THE INDIAN MARKET
Over the past ten years Indias crude steel output rose nearly 7%per year to55.3 million tons , while global crude steel output increased by 4% (Germanymanaged an increase of just under 1%p.a.) Although India is the worlds eighthlargest steel producer, its3%-plus share of global steel output is still very low; itis roughly the same as Ukraines share of world steel production. China, theworlds biggest steelmaker, produces nearly ten times as much as India.In 2005Indias crude steel output of 46.5 million tons was 8%higher than in 2004; onlyin China was the growth rate considerably higher at 15%. By contrast, produc-
tion volumes fell in the US and the EU-25 by nearly 5% and roughly 4% respec-tively. In the first five months of 2006 Indian steel production continued to ex-pand unabated, rising 10% yoy.
We forecast a significant increase in output by the Indian steel industry over themedium term. The entire industrys contribution to gross domestic product
8/10/2019 8501351 Analysis on Indian Steel Industry
11/22
should rise in the coming years to more than 30% compared to just under27% at present. The growth drivers are the expanding client industriesAutomotive engineering (production up 16% p.a. between 2000 and 2005),mechanical engineering (up 10% p.a.) and construction (up 6% p.a.).
( ) %
20002001 32.1
20012002 34.0 5.6
20022003 3.6 12.23
20032004 41.41 6.2
20042005 43.2 4.5120052006 46.42 .42
2006200 54.35 16.1
GRAPHICAL REPRESENTATION OF SUPPLY OF INDIAN STEEL
INDUSTRY
8/10/2019 8501351 Analysis on Indian Steel Industry
12/22
SUPPLY DEMAND MISMATCH
Even though India is now one of the worlds top ten steelmakers its domestic
output is insufficient to meet the demand in all segments. In 2005, some 4.7million tons of steel were imported, compared with only 2.2 million ten yearsearlier (an annual increase of 8%). The growth in Indian import demand in 2005of around 2 million tons is roughly equivalent to the total annual output ofHungary. Low steel prices smooth the way for imports from Russia, Ukraine andKazakhstan. The geographical proximity of Japan, South Korea and China makesthem important suppliers as well. We do not expect India to be self-sufficient inmany segments over the medium term. There are several reasons for this: firstly,steel consumption is rising very fast as a consequence of the prospective
dynamic economic growth. Secondly, there is demand for high-quality productswhich India will not be able to supply in sufficient quantities for the foreseeablefuture. These include products with surface finishing that helps them to be moredurable and retain their value for longer. In general, the trend towardsweight-optimized components persists; this improves the prospects for WesternEuropean exporters in the Indian market. As a member of the WTO (since 1995)India is obliged to gradually abolish import restrictions, so importing steel shouldbe far less problematic in future.
8/10/2019 8501351 Analysis on Indian Steel Industry
13/22
MARKET SHARE OF LEADING PLAYERS IN IRON AND
STEEL INDUSTRY
COMPAY PRODUCTIO OF
STEEL (I MIL-
LIO TOES)
MARKET SHARE(I PER-
CETAGE TERMS)
SAIL 13.5 32%
TISCO 5.2 11%
RNIL 3.5 8%
ESSAR,ISPAT,JSWL 8.4 19%
OTHERS 14.5 30%
TOTAL 45.1 100%
8/10/2019 8501351 Analysis on Indian Steel Industry
14/22
SOURCE: SAILS Annual report
Steel Production 2006-07
RINL
8%Sail
30%
Tata
steel
12%
Essar,
JSW &
Ispat
19%
Others
31%
8/10/2019 8501351 Analysis on Indian Steel Industry
15/22
COMPETITION ANALYSIS
Concentration Ratio:
In Economics the concentration ratio of an industry is used as an indicator
of the relative size of firms in relation to the industry as a whole. This may
also assist in determining the market form of the industry. One commonly
used concentration ratio is the four-firm concentration ratio, which consists
of the market share, as a percentage, of the four largest firms in the indus-
try. In general, the N-firm concentration ratio is the percentage of market
output generated by the N largest firms in the industry.
The 4 firm concentration ratio of the Iron and Steel Industry is 71%.
This implies that there is oligopoly in the industry as it is dominated my few
major players. Major percentage of market output is generated by the 4
largest firms in the industry.
Herfindahl Index:
The Herfindahl index, also known as Herfindahl-Hirschman Index or HHI, is
a measure of the size of firms in relationship to the industry and an indica-
tor of the amount of competition among them. It is an economic concept
but widely applied in competition law and antitrust. It is defined as the sum
of the squares of the market shares of each individual firm. As such, it can
range from 0 to 1 moving from a very large amount of very small firms to a
single monopolistic producer. Decreases in the Herfindahl index generally
indicate a loss of pricing power and an increase in competition, whereas in-
creases imply the opposite.
8/10/2019 8501351 Analysis on Indian Steel Industry
16/22
Value of Herfindahl index for Indian Steel Industry is .2470.
It implies that the competition in the steel industry is medium to high and
high concentration.
MERGERS AND ACQUISITIONS
Active mergers and acquisitions (M&A s) among players were indicative of the
consolidation dynamics within the steel industry globally.
Consolidation among top steel companies would continue in 2008 since industryplayers are engaged in an unfettered rush for scale. In so doing steelmakers arepursuing two main objectives: by purchasing additional production capacity theyaim to both improve their cost structure and increase their market clout. Themerger of the worlds two biggest steelmakers Mittal Steel (Netherlands) andArcelor (Luxembourg) will create an industry giant whose output is nearly four
times as much as that of the next biggest player (Nippon Steel) and eight timesas much as SAILs. If it continues like this 35% of steel production confined inthe top 10 companies within the next five years.
Consolidation among industry players would be driven by strategic fits between
companies, rather than financially centered deals.
A company can be a good strategic fit for merger if it has, among other things,
attractive access to raw materials, production capabilities, proven success in
complementary markets, new technologies or patented products and a success-ful global supply network.
In India the three biggest steelmakers, whose combined output is almost 20million tons, have a market share of 51%. Their domestic competitors arenumerous medium sized and smallish companies. One of these, for example, is
8/10/2019 8501351 Analysis on Indian Steel Industry
17/22
Ispat with an output of 2 million tons. More mergers can be expected betweencompanies of this size as these firms need to improve their position with regardto the powerful suppliers of raw materials. But till now there is no sign ofacquisition or mergers of Indian steel companies within India because most of
the major producers are public.As different major global steel producers like Arcelor-mittal, Posco and others are
setting up plants in India, competition in the future will increase. In that case
several mid-size domestic companies may go for mergers. But if we see from the
current position of the industry we can say that in future Indian steel industry
will remain oligopoly or can become a competitive one.
EXPECTED GROWTH
The International Iron and Steel Institute(IISI) has fore casted that the steel
demand will go of from 1.12 billion ton to 1.19 billion ton in 2008.And this will
further increase in a higher rate up to 2010.In India the growth will be more
prominent because of the growth in Real estate, Aviation, Manufacturing, Auto-
mobile sectors. The expected growth of the major steel in Indian market is given
by the following table.
000
5000 2010
2000 2010
& 2000 200
. 300 200
8/10/2019 8501351 Analysis on Indian Steel Industry
18/22
1250 2006
& 1500 200
200 2010
& 3000 200
200 2010
6000 200
4000 2010
1450 200
15000 2010
5000 200
1500 2010
1600 200
2000 200
5100 2010
6200 20062010
8/10/2019 8501351 Analysis on Indian Steel Industry
19/22
FACTORS HOLDING BACK THE INDIAN STEEL INDUSTRY
The growth of the Indian steel industry and its share of global crude steel pro-duction could be even higher if they were not being held back by major deficien-cies in fundamental areas. Investment in infrastructure is rising appreciably butremains well below the target levels set by the government due to financingproblems.
.
Energy supply
Power shortages hamper production at many locations. Since 2001 theIndian government has been endeavoring to ensure that power is availablenationwide by 2012. The deficiencies have prompted many firms withheavier energy demands to opt for producing electricity with their ownindustrial generators. India will rely squarely on nuclear energy for itsfuture power generation requirements. In September 2005 the 15th andlargest nuclear reactor to date went on-line. The nuclear share of theenergy mix is likely to rise to roughly 25% by 2050. Overall, India is likelyto be the worlds fourth largest energy consumer by 2010 after the US,
China and Japan.
Problems procuring raw material inputs
Since domestic raw material sources are insufficient to supply the Indiansteel industry, a considerable amount of raw materials has to be imported.For example, iron ore deposits are finite and there are problems in miningsufficient amounts of it. Indias hard coal deposits are of low quality. Forthis reason hard coal imports have increased in the last five years by atotal of 40% to nearly 30 million tons. Almost half of this is coking coal (theremainder is power station coal). India is the worlds sixth biggest coalimporter. The rising output of electric steel is also leading to a sharpincrease in demand for steel scrap. Some 3.5 million tons of scrap have
8/10/2019 8501351 Analysis on Indian Steel Industry
20/22
already been imported in 2006, compared with just 1 million tons in 2000.In the coming years imports are likely to continue to increase thanks tocapacity increases.
Inefficient transport system
In India, insufficient freight capacity and a transport infrastructure that haslong been inadequate are becoming increasingly serious impediments toeconomic development. Although the country has one of the worldsbiggest transport networks the rail network is twice as extensive asChinas its poor quality hinders the efficient supply of goods. The story is
roughly the same for port facilities and airports. In the coming years a totalof USD 150 bn is to be invested in transport infrastructure, which offershuge potential for the steel industry. In the medium to long term this capi-tal expenditure will lay the foundations for seamless freight transport.
8/10/2019 8501351 Analysis on Indian Steel Industry
21/22
OUTLOOK
THE outlook for the global steel industry in 2008 is stable, supported by strong
demand from emerging economies amid further consolidation among playersworldwide.
The scenario is quite same for the Indian steelmakers. And to keep pace with thegrowing economy Indian companies will produced more and more steel. We can
even see several large acquisitions of global steel companies like Corus by Indiansteel giants. Going forward, Indias lower wages and favorable energy prices willcontinue to promise substantial cost advantages compared to production facilitiesin (Western) Europe or the US. The growth prospects of the client industries arealso very good. The deployment of modern production systems is increasinglyenabling India to improve the quality of its steel products and thus to enhance itsexport prospects.
8/10/2019 8501351 Analysis on Indian Steel Industry
22/22