528 529 530 531 532 DET. 4 DET. 3 DET. 2 DET. 1 528 529 531 530 532 529 528 532 531 530 GENERAL NOTES 1.-ALL MEASUREMENT PREVAIL OVER DRAWING. 2.-WELDING PROCEDURE ACCORDING TO AWS D1.1. 3.-MATERIAL SPECIFIED: a.- MATERIALS SHALL BE USED FOR PLATE,CHANNELS,ANGLES,"M" AND "S" SHAPES- ASTM A36. b.-THE FOLLOWING MATERIALS SHALL BE USED FOR "W"SHAPES AND "WT" SHAPES CUT FROM "W" SHAPES -ASTM A36. 4.-PAINTING SYSTEM FOR STRUCTURE: ALL MANUFACTURING STEEL SHALL BE PROTECTED WITH A COATING WORKSHOP. ACCORDING TO “TECHNICAL SPECIFICATIONS OF PAINT N997601-5000-G-ST-002 Rev.1". 5.-UNLESS OTHERWISE NOTED,ALL BOLTS,NUT,AND WASHERS SHALL BE HOT-DIP GALVANIZED AFTER FABRICATION IN ACCORDANCE WITH ASTM A153. Tekla structures PRINCIPAL NOTES GENERALES NOTES IN DRAWING: ELEVATIONS: DIMENSIONS: MATERIAL: WELD: MINIMUM SIZE TILLET: ELECTRODE: BRANDS ARE PRECEDED BY: DATUM PLANE: 48º CONVEYOR 830-CB-110 IN METERS. (S.I.C.) IN. (mm) SEE GENERAL NOTES 6mm (U.N.O). WELD E70XX CONFORM TO THE AWS. BEARING BARS DIRECTION CHEKERED PLATE PROTRUSION PROPIETARIOS ESTA PENADA POR LA LEY. DE CUALQUIER TIPO SIN AUTORIZACION ESCRITA DE SUS SU REPRODUCCION, DIFUSION, COMERCIALIZACION O USO ESTE PLANO ES PROPIEDAD INTELECTUAL DE FABERTEK 0 ISSUED FOR CONSTRUCTION DG/YE S.M. 05/12/2014 B ISSUED FOR APPROVAL DG/YE S.M. 21/10/2014 A ISSUED FOR APPROVAL CS/YE S.M. 12/09/2014 REV. FECHA REV.POR DESCRIPCION APR.POR 130130210634 FABERTTEK S.M. 0 21117 SHOUGAN HIERRO PERU 830-CB-110-BTM03 01-07-2014 1:10 634AR1301 ICA 830-CB-110-BTM03 GENERAL ARRANGEMENT_BENTS_TOWER_830-CB-110 21117 BENT NUMBER (528-529-531 & 532)-SHEET 3 1:15 (S.I.C.) MODELADO: OT: SEC. CLIENTE: LUGAR: N° PROYECTO: ESCALA N° DE PLANO PLANO DE REFERENCIA REVISO: TITULO: AREA: PROYECTO: REVISION FECHA: ORDEN DE COMPRA: 14395 GENERAL ARRANGEMENT BENT - PLAN (NUMBER 528-529-531 & 532) SCALE: 1:100 14395 B 793 793 C.L. CONV. A 634AR1301-127-V2 W8X15 634AR1301-127-C2 PL9.5X120.7 634AR1301-127-C1 PL9.5X120.7 634AR1301-127-BK2 PL38X320 634AR1301-127-BK2 PL38X320 634AR1301-127-BK1 PL38X320 634AR1301-127-BK1 PL38X320 634AR1301-128-V3 W8X24 634AR1301-128-C2 W10X60 634AR1301-128-C1 W10X60 634AR1301-128-BK2 PL38X320 634AR1301-128-BK2 PL38X320 634AR1301-128-BK1 PL38X320 634AR1301-128-BK1 PL38X320 14381 634AR1301-130-V2 W8X24 634AR1301-130-BK1 PL38X320 634AR1301-130-V2 W8X24 634AR1301-130-BK1 PL38X320 14395 634AR1301-130-C2 W10X60 634AR1301-130-C1 W10X60 634AR1301-130-BK2 PL38X320 634AR1301-130-BK2 PL38X320 634AR1301-131-C1 W10X60 634AR1301-131-BK1 PL38X310 634AR1301-131-V2 W8X24 634AR1301-131-BK2 PL38X310 634AR1301-131-BK1 PL38X310 634AR1301-131-C2 W10X60 634AR1301-131-BK2 PL38X310 EL.+161.319 TRUSS 635AR1301-86 TRUSS 635AR1301-91 TRUSS 635AR1301-89 TRUSS 635AR1301-88 TRUSS 635AR1301-87 B.O BASE PL EL.+154.141 PIN EL.+161.306 EL.+157.656 EL.+156.781 B.O BASE PL EL.+154.530 634AR1301-130-C1 W10X60 PIN EL.+161.695 EL.+161.705 B.O BASE PL 634AR1301-128-C1 W10X60 EL.+162.456 EL.+162.446 634AR1301-127-C1 W10X60 B.O BASE PL EL.+162.821 EL.+162.831 14395 GENERAL ARRANGEMENT BENT - ELEVATION (NUMBER 528-529-531 & 532) SCALE: 1:100 14395 5000 PIN PIN 5500 PIN PIN 14381 7000 14395 PIN B.O BASE PL EL.+155.905 7000 PIN 14395 PLATE BASE DISTRIBUTION (NUMBER 528-529-531 & 532) SCALE: 1:100 14395 793 793 793 793 A B DET. 5 634AR1301-127-C1 W10X60 634AR1301-127-C2 W10X60 W.P. W.P. B A C.L. CONV. 1476.22 W.P. 1470 1470 634AR1301-128-C1 W10X60 634AR1301-128-C2 W10X60 1476.22 W.P. 1662.56 W.P. 1662.56 W.P. 14381 634AR1301-130-C1 W10X60 634AR1301-130-C2 W10X60 14395 1660 1660 A B 1662.56 W.P. 1662.56 W.P. 1660 1660 B A 634AR1301-131-C2 W10X60 634AR1301-131-C1 W10X60 165 175 400 10 PL25X227 EL.+162.831 DETAIL 1 SCALE : 1:15 25 38 634AR1301-127-BK2 PL38X320 PL12X195.2 634AR1301-127-PN1 D75 PL25X237 PIN 634AR1301-127-BK1 PL38X320 634AR1301-127-C2 W10X60 PL12X195.2 634AR1301-127-PN1 D75 PIN EL.+162.821 400 10 634AR1301-128-PN1 D75 634AR1301-128-PN1 D75 PL25X237 PIN PIN EL.+162.446 EL.+162.456 DETAIL 2 SCALE : 1:15 25 38 175 PL12X195.2 634AR1301-128-BK2 PL38X320 165 PL25X227 634AR1301-128-BK1 PL38X320 634AR1301-128-C2 W10X60 PL12X195.2 399 10 634AR1301-130-PN1 D75 EL.+161.695 EL.+161.705 DETAIL 3 SCALE : 1:15 25 38 175 634AR1301-130-BK2 PL38X320 PL12X194.7 634AR1301-130-PN1 D75 PL25X237 PIN 165 634AR1301-130-C2 W10X60 PL12X194.7 634AR1301-130-BK1 PL38X320 PL25X227 PIN 25 38 165 178 374 13 PIN EL.+161.306 EL.+161.319 DETAIL 4 SCALE : 1:15 634AR1301-131-BK2 PL38X310 PL12X182.2 634AR1301-131-PN1 D75 PL25X240 634AR1301-131-BK1 PL38X310 PL12X182.2 634AR1301-131-C1 W10X60 634AR1301-131-PN1 D75 PL25X227 PIN 550 275 144 144 85 85 75 75 650 325 225 225 70 70 634AR1301-127-C2 W10X60 (02) Ø50 mm GROUT HOLES (04) Ø52 mm HOLES PL12X189 PL12X189 PL12X189 PL12X189 PL38X550 DETAIL 5 SCALE : 1:10
