800-488-3407 Log Splitter Pumps & Clutch Pumps 43&

Hydraulic Clutch Pumps• Brand new. Hyd raulic pump driven by 12 volt DC clutch. For use in marine, agricultural and industrial use. Use for remote hydraulics in service trucks, boats, trucks with automatic transmissions, farm tractors, snowplows, etc.SPECIFICATIONS FOR ALL• 12 VDC operation • 3000 RPM max. • Cast iron foot mount• CW rotation • Rear ports: IN SAE 16, OUT SAE 12

Three Styles AvailableV-Belt: 7˝ diam. 2 belt 1/2˝ A type v-belt clutch

6 Groove Serpentine: 6˝ diam., 6 groove serpentine clutch8 Groove Serpentine: 57/8˝ diam., 8 groove serpentine clutch

V-Belt 6 Groove 8 Groove GPM at Replacement Pumps ITEM # ITEM # ITEM # 2000 RPM Displ. PSI Shpg. Price ITEM Shpg. Price 9-1737 9-1737-S-6 9-1737-S-8 12 GPM 1.45 cu. in. 3000 32 lbs. $689.95 9-1737-P 16 lbs. $492.25 9-1738 9-1738-S-6 9-1738-S-8 20 GPM 2.32 cu. in. 2200 33 lbs. $715.95 9-1738-P 16 lbs. $504.30

V-Belt

Serpentine

Replacement Pump

Replacement Serpentine Clutches• Shpg. 10 lbs. each

ITEM 1-2184-S-6 6 Groove $180.60ITEM 1-2184-S-8 8 Groove $167.95

Replacement V-Belt Clutch

ITEM 1-2184 $135.60• V-belt clutch. Shpg. 12 lbs.

MTE 2 Stage Hydraulic Pumps• Brand new, MTE HYDRAULICS two stage HI/LO pressure hydraulic gear pump. Ideal for applications such as log splitters, presses and other equipment where rapid movement of the cylinder at low pres-sure is required prior to automatically switching to the high pressure mode to meet load requirements. The change from LO to HI pressure is automatic with the LO stage pressure preset at 700 PSI.

SPECIFICATIONS • Rotation CW • Speed 3600 RPM max. • Rqd. filtration 25 micron • Pump type gear • Pressure 3000 PSI max. • Shaft 11/2˝ long keyed

Flow (GPM) Engine Power Unloading Shaft ITEM LO Stage HI Stage Required Pressure Inlet Outlet Dia. Mount Size Shpg. Price 9-7972-7 7 1.8 4 HP 500 PSI 3/4˝ NPT 1/2˝ NPT 1/2˝ 4 bolt 4F17 57/16˝ x 3˝ x 311/16˝ 10 lbs. $141.95 9-7972-11 11 1.8 5 HP 700 PSI 1˝ Hosebarb 1/2˝ NPT 1/2˝ 4 bolt 4F17 6˝ x 4˝ x 311/16˝ 10 lbs. $146.80 9-7972-13 13 3 6.5 HP 500 PSI 1˝ Hosebarb 1/2˝ NPT 1/2˝ 4 bolt 4F17 61/4˝ x 4˝ x 311/16˝ 12 lbs. $156.55 9-7972-16 16 3 8 HP 500 PSI 1˝ Hosebarb 1/2˝ NPT 1/2˝ 4 bolt 4F17 69/16˝ x 4˝ x 311/16˝ 12 lbs. $168.30 9-7973 22 6.3 12 HP 500 PSI 11/4˝ Hosebarb 3/4˝ NPT 5/8˝ 2 bolt SAE A 61/4˝ x 61/4˝ x 45/8˝ 22 lbs. $373.15

2 Bolt SAE A

Dynamic Two Stage Hydraulic Pumps• Brand new DYNAMIC, two stage HI/LO pressure hydraulic gear pumps. Ideal for applications such as log splitters, presses and other equipment where rapid movement of the cylinder at low pressure is required prior to au-tomatically switching to the high pressure mode to meet load requirements

SPECIFICATIONS FOR ALL• Pump type gear • Speed 3600 RPM max. • Rqd. filtration 25 micron• Rotation CW • Unloading pressure 650 PSI • Shaft 1/2˝ dia. x 11/2˝ keyed• Press. 3000 PSI max. • Overhung shaft load up to 90 lbs. • Mount 4 bolt USA 4F17

Flow (GPM) Engine Power Shaft ITEM LO Stage HI Stage Required Inlet Outlet Dia. Mount Size Shpg. Price 9-7503-8 8 2 5 HP 1˝ Hosebarb 1/2˝ NPT 1/2˝ 4 bolt 4F17 43/4˝ x 51/8˝ x 33/8˝ 10 lbs. $155.00 9-7503-11 11 3.4 5 HP 1˝ Hosebarb 1/2˝ NPT 1/2˝ 4 bolt 4F17 51/4˝ x 51/8˝ x 33/8˝ 10 lbs. $157.05 9-7503-13 13 3.4 6.5 HP 1˝ Hosebarb 1/2˝ NPT 1/2˝ 4 bolt 4F17 59/16˝ x 51/8˝ x 33/8˝ 11 lbs. $165.75 9-7503-16 16 4 8 HP 1˝ Hosebarb 1/2˝ NPT 1/2˝ 4 bolt 4F17 6˝ x 51/8˝ x 33/8˝ 12 lbs. $169.65 9-7970 22 7 12 HP 1˝ NPT 3/4˝ NPT 5/8˝ 2 bolt SAE A 69/16˝ x 61/4˝ x 411/16˝ 22 lbs. $255.35 9-7971 28 7 16 HP 1˝ NPT 3/4˝ NPT 5/8˝ 2 bolt SAE A 69/16˝ x 61/4˝ x 411/16˝ 23 lbs. $264.50

2 Bolt SAE A

4 Bolt USA 4F17

4 Bolt USA 4F17