Upload
mowaten-masry
View
214
Download
0
Embed Size (px)
Citation preview
7/30/2019 8- Valves Types and Technology
http://slidepdf.com/reader/full/8-valves-types-and-technology 1/3
Valves Types and Technology
Course DescriptionCourse Code:
Course Title: Valves Types and Technology
Hours: 30
Calendar Description:
This course has been designed to improve the following competences
• To tabulate the valve data sheet
• To assembly and disassembly the valve parts safely
• To test control valve operation (on line – off line)
• To interpret the function of control valve
• To install the control valveThis will be achieved through listing the control valve types, describing the valve parts, and practicing valve selection, sizing, and testing
Major TopicsA. Module 1 – Introduction to Control Valve Function
B. Module 2 – Control Valve Types
A. Module 3 – Actuators
C. Module 4 – Valve SealingD. Module 5 – Valve Accessories
E. Module 6 – Symbols and documents
F. Module 7 – Self operated valvesG. Module 8 – Testing and Installation
Texts & ReferencesReferences:
• Quantum Teaching
• Control Valve Hand Books
• Valve Selection and Sizing Hand Books
Student Evaluation
A passing grade in this course is determined by successful completion of final assignment, practical sizing and selection application, and testing operation
Delivery MethodClassroom and software application.
Student Equipment & Supplies
7/30/2019 8- Valves Types and Technology
http://slidepdf.com/reader/full/8-valves-types-and-technology 2/3
All materials and resources are supplied
Learning Outcome GuidesModule 1 – Introduction to Control Valve Function
Upon successful completion of this Learning OutcomeGuide, you will be able to master the control valve function
1. Interpret the Control Valve Function
2. Propose the proper loop construction of different applications
Module 2 – Control Valve Types
Upon successful completion of this Learning Outcome Guide, you will be able
to differentiate between the control valve types
1. To list the different types of linear motion valves and its application2. To list the different types of rotary motion valves and its application
3. To list the different types of special valves and its application4. To categorize the different flow characteristic curves
5. To study the shut-off classes standards.6. To select the proper material of plug according to the operating conditions.
Module 3 – Actuators
Upon successful completion of this Learning OutcomeGuide, you will be able to categorize the different actuators
1. To recognize the different types of actuators for different applications2. To calculate the forces acting on valve movement
3. To size the control valve actuators
Module 4 – Valve Sealing
Upon successful completion of this Learning OutcomeGuide, you will be able to control the external leakage of the valve
1. To study the end connections2. To be familiar with packing types and materials
Module 5 – Valve Accessories
Upon successful completion of this Learning OutcomeGuide, you will be able to describe the valve accessories
1. To understand the operation of the I/P transducer.2. To learn the solenoid applications
3. To know about the positioners.
4. To define the fail system construction.5. To recognize the limit switch types
Module 6 – Symbols and documents
Upon successful completion of this Learning Outcome Guide, you will be able
to understand the Phenomena Associated to the Control Valve1. To know about ISA valve symbols
7/30/2019 8- Valves Types and Technology
http://slidepdf.com/reader/full/8-valves-types-and-technology 3/3
2. To study valves data sheet
3. To understand the valve hookup drawings
Module 7 – Self operated Valves
Upon successful completion of this Learning Outcome
Guide, you will be able to select and size the control valve1. To distinguish between Regulators, Safety, and relief valves
2. To describe construction and operating theory
Module 8 – Testing and Installation
Upon successful completion of this Learning Outcome
Guide, you will be able to test and install the control valve properly
1. To test and inspect the control valve2. To list the valve installation procedure
Course duration 5days