8-inch Digital Clock Instruction Manual

V4.08-inch Digital Clock Instruction Manual

Model: PIECK1(Black) PIECK2W(White)

Thank you for choosing this product! We strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at https://pipishellav.com/pag-es/reviews if you are satisfied. Should you have any issues, please don't hesitate to contact us.Technical Support: 1-800-556-9829 Mon-Fri 10am - 5pm (PST) (USA) (CAN)Other Info: [email protected] (US/CA)

HOW TO USE:

15/16 in.(24mm)

OK

25/64 in.(10mm)

OPERATION INSTRUCTION:

Remove the clock and AC adaptor from the package.

Plug the input connector of the AC Adaptor into the DC 5V 1.5A hole on the side of the device, then plug the other end of the AC Adaptor into the power supply.

Press and hold the ON/OFF button for a few seconds. In 5 seconds the clock will display the day of the week/day cycle/exact time/calendar.

1.

2.

3.

UP

Model: PIECK1(Black) PIECK2W(White)

NOTE:The Digital Clock is preset to Eastern Time. If you receive the clock in another time zone (e.g. Pacific, Mountain or Central), you will have to adjust the time by following these instructions.

USB port for factory software upgrading only!

01

1. SET TIME

Press the [MENU] button to access the settings page.

Press the [UP/DOWN] button to access the 1st line titled “Set Time”.

Please note: The function you are in will turn yellow as shown in the image above. When the fonts of the selected line turn into yellow, press the [OK] button and the HOUR you select-ed will turn into red as shown in the image in the page 03, then press the [UP/DOWN] button to adjust the hour.

A.

B.

C.

02

Press the [MENU] button to access the settngs page.

Please Note: The function you are in will turn yellow as shown in the image above.

Press [OK] to save and [MENU] to exit.

Caution

E.

F.

A. Press the [MENU] button to access the settings page.

B. Press the [DOWN] button to access the 2nd line titled “Set Date”.

C. Please note: The function you are in will turn yellow as shown in the image in the next page. When the fonts of the selected line turn into yellow, press the [OK] button and the DAY you selected will turn into red font as shown in the image in the next page.

2. SET DATE

After finishing the hour adjustment, press [RIGHT] button to select the MINUTE to be changed and the MINUTE you selected will turn into red, then press the [UP/DOWN] button to adjust the minute.

After the changes are completed, press the [OK] button to save the settings.

Press the [MENU] button to go back to the main display or press the [UP/DOWN] button to access other settings.

10

D.

03

2. SET DATE


B. Press the [DOWN] button to access the 2nd line titled “Set Date”.

C. Please note: The function you are in will turn yellow as shown in the image in the next page. When the fonts of the selected line turn into yellow, press the [OK] button and the DAY you selected will turn into red font as shown in the image in the next page.

3. SET TIME MODE


B. Press the [DOWN] button to access the 3rd line titled“Time Mode”.

C. Please note: The function you are in will turn yellow as shown in the image below. When the fonts of the selected line turn into yellow, press the [OK] button and the TIME MODE you selected will be framed in red box as shown in the image below, then press the [RIGHT/LEFT] button to switch between: 12 Hours (A.M./P.M.) or 24 Hours (Military Time)

D. After the changes are completed, press the [OK] button to save the settings.

E. Press the [MENU] button to go back to the main display or press the [UP/DOWN] button to access other settings.

D. After finishing the day adjustment, press [RIGHT] button to select the MONTH to be changed and the MONTH you selected will turn into red, then press the [UP/DOWN] button to adjust the month. Press the [OK] button to save the settings.

E. After finishing the month adjustment, press [RIGHT] button to select the YEAR to be changed and the year you selected will turn into red, then press the [UP/DOWN] button to adjust the year. Press the [OK] button to save the settings.

F. After the changes are completed, press the [OK] button to save the settings.

G. Press the [MENU] button to go back to the main display or press the [UP/DOWN] button to access other settings.

04

Time Mode 12 Hours

Set Date 23-04-2019

Set Date 23-04-2019

Set Date 23-04-2019

DAY

MONTH

YEAY

4. SET DATE MODE

A. Press the [MENU] button to access the settings page. B. Press the [DOWN] button to access the 3rd line titled “Date Mode”.

Please note: The function you are in will turn yellow as shown in the image below. When the fonts of the selected line turn into yellow, press the [OK] button and the DATE MODE you selected will be framed in red box as shown in the image below, then press the [LEFT/RIGHT] button to switch be-tween:

Day-Month-Year (Standard European Mode).Month-Day-Year (Standard U.S. Mode).C. After the changes are completed, press the [OK] button to save the settings.

D. Press the [MENU] button to go back to the main display or press the [UP/DOWN] button to access other settings.

5. SET LANGUAGE


B. Press the [DOWN] button to access the 5th line titled “Lan-guage”.

C. Please note: The function you are in will turn yellow as shown in the image below. When the fonts of the selected line turn into yellow, press the [OK] button and the LANGUAGE you selected will be framed in red box as shown in the image below, then press [LEFT/RIGHT] button to select a language (8 languages available including English, French, German, Italian, Polish, Spanish, Dutch, Welsh ).



05

Date Mode Day-Month-Year

Langeuage < English >

6. AUTOMATIC BRIGHTNESS


B. Press the [DOWN] button to access the 6th line titled“Auto-matic brightness”.

C. Please note: The function you are in will turn yellow as shown in the image below. When the fonts of the selected line turn into yellow, press the [OK] button and the field you select-ed will be framed in red box as shown in the image below, then press the [LEFT/RIGHT] button to select between: Auto，Level 1, Level 2, Level 3, Level 4, Level 5.

Please note: Auto means the brightness automatically dims at night and brightens during the day.Level 1 means the dimmest level and level 5 is the brightness level.



7. SET ALARM STATUS


B. Press the [UP/DOWN] button to access the 8th line titled “Alarm Status”. The function you are in will turn yellow as shown in the image below.

06

Automatic brightness < Auto >

Alarn Status

07

C. When the fonts of the selected line turn into yellow, press the [OK] button to access the timer page as shown in the image below, then press [UP/DOWN] button to select between timer 1, timer 2, timer 3, timer 4 and add timer shown in the image below.

Timer 1 Off

Timer 2 Off

Timer 3 Off

Add Timer

D. When you select the 1st line titled “Timer 1”, the front will turn into yellow as shown in the image below, then press [OK] button to access the setting page, please refer to procedures 2 and 3 to set the time and date. After the changes are completed, press the [OK] button to save the settings.

Set Time < Unset >

Set Date 23-4-2019

E. Press the [UP] button to select the 3rd line titled “Set Repeat”. When the fronts turns into yellow as shown in the image below, press [OK] button to access the setting page, then press the [UP/DOWN] button to switch between: Sunday, Tuesday, Friday, Wednesday, Thursday, Friday, Saturday and Monday. After the changes are completed, press the [OK] button to save the settings.

Set Repeat Sunday/Monday

G. Press the [UP] button to select the 5th line titled “Start Timer”, When the fronts turns into yellow as shown in the image below, then press [OK] button and the selected field is framed in red as shown in the image below, then press the [RIGHT/LEFT] button to switch between: Off and On. After the changes are completed, press the [OK] button to save the settings.

08

Del Timer

F. Press the [UP] button to select the 4th line titled “Tag”. When the fronts turns into yellow as shown in the image below, press [OK] button to access the setting page, then press the [UP/DOWN] button to switch between: Off, Meal, Medicine,Clinic, Shower, Gardening Cleaning Appointment, Walk Dog. After the changes are completed, press the [OK] button to save the set-tings.

Off

Meal

Medicine

Clinic

Start Timer < Off >

H. Press the [UP] button to select the 6th line titled “Del Timer”. When the fronts turns into yellow as shown in the image below, then press [OK] button to delete timer.

I. After the changes are completed, press the [OK] button to save the settings. Press the [MENU] button to go back to the main display or press the [UP/DOWN] button to access other settings.

09

PLEASE NOTE:

Please refer to the procedures in setting timer 1 to set timer 2, timer 3 and so on.

The alarm will ring for 60 seconds and then go off on its own, or you can manually stop it by pressing any button on the back of the clock.

Advanced Mode < Off >

8. SET ADVANCED MODE

Please Note: Advance mode turn on and off the time of day for morning, afternoon, evening and night.


B. Press the [DOWN] button to access the 9th line titled“Ad-vanced Mode”.

C. Please note: The function you are in will turn yellow as shown in the image below. When the fonts of the selected line turn into yellow, press the [OK] button and the field you selected will be framed in red box as shown in the image below, then press the [UP/DOWN] button to switch between: Off and On



9. SET VOLUME


B. Press the [DOWN] button to access the 8th line titled“Vol-ume”.

SPECIFICATIONS:

• Name: 8 inches high definition digital clock• Digital Display: week, day cycle, exact time, calendar• 2 Time Mode: 12-hours and 24-hours• 2 Date Mode: dd/mm/yy and mm/dd/yy• Color: white, black• 8 Languages Available: English, French, German, Italian, Polish, Spanish, Dutch, Welsh• Volume Range: 0 to 5 (5 is the highest volume and 0 is mute)• Power Supply: Plug in• Specification of Power Adapter: AC 110V—240V/DC 5V 1.5A• Placement Method: wall mount/table stand

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture condition. To prevent fire or shock hazard, do not install this product in a confined space.

Volumn < 0 >



C. Please note: The function you are in will turn yellow as shown in the image below. When the fonts of the selected line turn into yellow, press the [OK] button and the field you selected will be framed in red box as shown in the image below, then press the [LEFT/RIGHT] button to select the volume ranging from 0 to 5, 5 is the highest volume and 0 is mute.

10

IMPORTANT & WARRANTY

The Digital Clock is packaged with a thin anti-scratch screen protector. Please feel free to peel it off using the pull-up tab. Please be sure not to apply pressure to the high quality non-reflective LED screen.

The Digital Clock is preset to Eastern Time. If you receive the clock in another time zone (e.g. Pacific, Mountain or Central), you will have to adjust the time by using these instructions.

The Digital Clock does not change the time automatically for daylight savings time, and needs to be adjusted manual-ly.

The Digital Clock has a 12-month warranty provided by the manufacturer.

Non-artificial damage or defect of the device or AC adapter can be replaced during the warranty period.

1.

2.

3.

4.

5.

CAUTION

To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside

11

Documents

8-inch Digital Clock Instruction Manual