Upload
jorgeroa111
View
216
Download
0
Embed Size (px)
Citation preview
7/24/2019 79-fc144
1/3
2008 Cummins Inc. Box 3005 Columbus IN 47202-3005 U.S.A.
Printed from QuickServe
Online.
All Rights Reserved. Last Modified: 02-Mar-2011
File: 79-fc144 Page 1 of 3
Fault Code 144
Coolant Temperature Sensor Circuit
CODES REASON EFFECT
Fault Code: 144PID(P), SID(S): P110
SPN: 110FMI: 3Lamp: YellowSRT: 00-088
High voltage detected at thecoolant temperature signal pin 17
of the sensor harness connector.
Possible white smoke. Fan will stay on ifcontrolled by the electronic control module
(ECM). No engine protection for coolanttemperature.
Coolant Temperature Sensor Circuit
Circuit Description:
The coolant temperature sensor is used by the ECM to monitor the temperature of the engine coolant. The coolanttemperature is used by the ECM for the engine protection system, timing, and fueling control.
Component Location:
M11 - The coolant temperature sensor is located in the front of the thermostat housing support on most applications. Onbus applications, the coolant temperature sensor is usually located at the rear of the thermostat housing support.
N14 - The coolant temperature sensor is located on the top of the thermostat housing.
Shop Talk:The resistance of the sensor varies with the temperature. Compare your reading to this table.
Temperature (C) Temperature [F] Resistance (ohms)
0 32 30k to 36k
25 77 9k to 11k
50 122 3k to 4k
75 167 1350 to 1500
100 212 600 to 675
7/24/2019 79-fc144
2/3
2008 Cummins Inc. Box 3005 Columbus IN 47202-3005 U.S.A.
Printed from QuickServe
Online.
All Rights Reserved. Last Modified: 02-Mar-2011
File: 79-fc144 Page 2 of 3
Refer to Troubleshooting Fault Code t05-144
7/24/2019 79-fc144
3/3
2008 Cummins Inc. Box 3005 Columbus IN 47202-3005 U.S.A.
Printed from QuickServe
Online.
All Rights Reserved. Last Modified: 02-Mar-2011
File: 79-fc144 Page 3 of 3