7557 Lubricants

Embed Size (px)

Citation preview

  • 8/9/2019 7557 Lubricants

    1/2

    Timken Grease Interchange GuideTimken Grease Interchange Guide

    Timken PremiumAll Purpose Industrial

    LC-2Grease

    Castrol4020/220-2

    Castrol8060/220-2

    ChevronDelo EP 2

    Chevron RPM AutomotiveLC Grease EP-2

    CitgoLithoplex MP2

    Citgo PremiumLithiumEP 2

    ConocoPhillipsSuper-STA2

    ExxonMobilRonexMP

    Exxon MobilUnirexEP 2

    FAG LOAD220

    Fuchs(Century) Uniwrl2

    Lubrication EngineersAlmagard3752

    LUBRIPLATE

    1552MobilgreaseXHP 222

    PennzoilPennlithEP 712

    PennzoilPremiumLithiumComplex2

    Petro-CanadaMultipurposeEP 2

    RoyalPurple Ultra-Performance2

    ShellAlbidaLC 2

    ShellRetinax LC 2

    SKFLGWA2

    SKFLGEP2

    Texaco Starplex2

    Unocal76MultiplexRed

    TimkenConstructionand

    Off-HighwayGrease

    CastrolMoly 860-2ES

    CastrolContractorGrease 2

    Conoco PhillipsSuper Lube M EP

    D.A.Stuart MolyplexEP 2

    Exxon MobilCentaur Moly

    Exxon MobilRonex ExtraDutyMoly

    FuchsMoreplex 2

    LUBRIPLATE3000

    MobilgreaseMoly52

    MystikTetrimolyExtreme

    PennzoilMultipurposeEP 302

    PennzoilPremiumLithiumComplex2with

    Moly

    Petro-CanadaPrecisionMolyEP 2

    Schaeffer MolyUltraSupreme238

    ShellRetinax CMX 2

    Texaco StarplexMolyMPGM2

    Unocal76 Megaplex

    TimkenBall BearingPillow Block

    Grease

    Conoco PhillipsPolyurea2

    ChevronSRI

    CitgoPolyurea2

    Citgo Polyurea MP2

    Conoco PhillipsPolyurea2

    Exxon MobilPolyrexEM

    Exxon MobilUnirex N

    LUBRIPLATEEM

    MobilgreaseAW2

    Petro-Canada EMB

    ShellAlvaniaRL3

    ShellDoliumBRB

    SKFLGHP2

    Unocal76 Unolife

    Grease

    TimFood

    Gre

    SKFLG

    FAG Arcan

    Keystone NHT/A

    LE 4025H1

    LPS TheFoodl

    LUBRIPLA

    Mobilgrea

    Petro-Canad

    RoyalPUltra-Perform

    FDA G

    TimMulti-Us

    EP1andE

    CastrolLon

    CastrolSph

    ConocoConol

    DowMoly

    ExxonMobil

    76Un

    CITGO PLithium

    Chevron M

    Fina Lit

    ChevronDu

    FAGArcano

    LUBRIPLA

    LUBRIPLAT

    LUBRIPLA

    SKFL

    SKF

    ShellAl

    Mobilu

    The American Society for the Testing of Materials (ASTM) has established standards for the testing of lubricating greases.

    This table has taken the typical range of test results reported by the lubricant companies for each test and ranked them into

    a good, better, best order.

    Grease Test Good Better Best TimkenGrease Test Good Better Best Timken

    Timken Premium Four Ball Wear, ASTM D2266, 40 kg, 167 F, scar mm 0.8 0.6, 0.7 0.4, 0.5 0.6

    All Purpose Industrial Four Ball Weld, ASTM D2596, kg 250 285 >315 285

    LC-2 Grease

    Timken OK Load, ASTM D2509, lbs. 40, 45 50, 55 >60 55

    Timken Construction Wheel Bearing Leakage, ASTM D1263, 300 F, g 8 5 315 620

    Four Ball Wear, ASTM D2266, 40 kg, 167 F, scar mm 0.8 0.6 0.45 0.45

    Timken OK Load ASTM D2509, lbs. 40, 45 50, 55 >60 65

    Operating Temperature Limit, F 300 350 400 400

    Timken Ball Bearing Wheel Bearing Life, ASTM D3336, hrs@350 F 250 500 >750 750

    Pillow Block Grease Water Washout, ASTM D1264, 175 F, % 10 5 2 2

    Rust Prevention, ASTM D6138, 10% Seawater, Rating 1 0.5 0 0

    Timken Mobility, US Steel, 0 F, gms/sec 0.04 0.08 >0.12 0.12

    Mill Grease Rust Prevention, ASTM D6138, 10% Seawater, Rating 1 0.5 0 0

    Salt Fog, ASTM B117, hrs. 1,000 1,500 >2000 2,500

    Water Sprayoff, ASTM D4049, % loss 20 15 60 60

    Timken Food Safe Four Ball Wear, ASTM D2266, 40 kg, 167 F, scar mm 0.8 0.6, 0.7 0.4, 0.5 0.6

    Grease Four Ball Weld, ASTM D2596, kg 250 285 >315 315

    Water Washout, ASTM D1264, 175 F, % 10 5 2 5

    Timken Synthetic Four Ball Wear, ASTM D2266, 40 kg, 167 F, scar mm 0.8 0.6, 0.7 0.4, 0.5 0.6

    Industrial LC-1.5 Grease Four Ball Weld, ASTM D2596, kg 250 285 >315 285

    Timken OK Load, ASTM D2509, lbs. 40, 45 50, 55 >60 55

    Timken Ultra-High Wheel Bearing Life, ASTM D3336, hrs@300 F 1500 1750 2000 2000+

    Speed Spindle

    Pour Point, ASTM D97, F, Max. -45 -55 -60 -65

    Grease

    Timken Multi-Use Economical Multi-Use Grease

    Lithium EP1 and EP2

    Grease

    Bearings SpecialtySteel

    PrecisionComponents Lubrication

    Seals Remanufacture and Repair

    Engineering Services

    www.timken.com/lubricants

    2009 The Timken Company

    Printed in USA

    10M 02-09-29Order No.7557

    Proper maintenance and handling practices are critical. Failure tofollow installation instructions and to maintain proper lubrication can

    result in equipment failure, creating a risk of serious bodily harm.

    WARNING

    Failure to observe the following warnings could create arisk of serious injury.

    TimkenSynthetic Industrial

    LC-1.5Grease

    MobilithSHC 460

    Chevron Ulti-PlexSynthetic Grease EP

    Conoco PhillipsSynConExtra Long Life

    Exxon MobilSHCPM

    ShellAlbida460

    TexacoStarfakPM

    TimkenUltra-High SpeedSpindle Grease

    Kluberspeed BF72-22

    FAG ArcanolL-75

    FAG ArcanolSpeed 2,6

    LubCon HighspeedL252

    SKFLGCT2

    TimkenMill Grease

    CastrolMolub-Alloy777-2ES

    Chem&LubeBlackMagic

    ChevronUlti-Plex EP 2

    Conoco PhillipsHD Calcium

    Conoco PhillipsMilube

    ExxonMobilRonexExtraDuty2

    FAG ArcanolLoad400

    KyodoYushi PalmaxRBG

    Loctite ViperLube

    LUBRIPLATE1444

    ShellRetinax Grease HD

    SKFLGHB2

  • 8/9/2019 7557 Lubricants

    2/2

    This selection guide is not intended to replace specific recommendations by the equipment

    builder who is responsible for its performance.

    A single source,many lubrication optionsThe eight primary lines of Timken

    lubricants compliment our G-Power

    and M-Power single-point lubricators,

    C-Power centralized multi-point

    lubricators and our global offering oflubrication products. G-Power,

    M-Power and C-Power units

    consistently distribute grease into

    machine operations. These canisters

    can be filled with Timken lubricants

    or many other types of commercial

    lubricants and mounted into place with

    a full line of Timken accessories.

    Around the world,

    customers use

    Timken lubricants

    for rail bearings,

    rolling mills,

    power generation

    equipment,

    construction and

    transportation vehicles, and other

    industrial applications. With more than

    a century of leadership in developing

    friction management solutions, Timken

    is a trusted source for a broad range of

    bearings and products that help keep

    all bearings and related components

    running smoothly.

    For more information on Timken

    lubricants, contact your authorized

    Timken distributor or sales

    representative or visit

    www.timken.com/lubrication.

    Extreme Heat HeavyLoads

    High Sliding Wear

    DirtyEnvironments

    SlowSpeeds ShockLoading

    Agriculture/Mining Cement PlantsConstruction/OffRoadRockQuarry

    Earth Moving Equipment

    Fleet Equipment HeavyIn dustry

    Pivot Pins/Splined Shafts

    Timken

    Construction and Off-HighwayGrease

    Environment ApplicationLidsarecolor-coded

    foreasyidentification

    Corrosive Media Extreme Heat

    HeavyLoads Wet Conditions

    Slowto Moderate Speeds

    AluminumMills Paper Mills

    SteelMills Offshore Rigs

    Power Generation

    TimkenMillGrease

    Wet and Corrosive ConditionsQuiet Environments Light Loads

    Moderate to High Speeds

    ModerateTemperatures

    LightlyLoaded PillowBlocks

    Idler Pulleys Oven Conveyors

    Electric Motors Fans Pumps

    TimkenBallBearing

    PillowBlockGrease

    ExtremeLowandHighTemperatures

    Severe Loads

    Corrosive Media

    Slowto Moderate Speeds

    Wind EnergyMain Bearing

    Pulp and Paper Machines

    GeneralHeavyIndustry

    Marine Applications

    Centralized Grease Systems

    Timken

    Synthetic IndustrialLC-1.5 Grease

    IncidentalFood Contact

    Hot and Cold Temperatures

    Moderate to High Speeds

    MediumLoads

    FoodandBeverageIndustries

    PharmaceuticalsTimken

    Food Safe Grease

    Ultra-High Speeds

    Extreme LowTemperatures

    Machine Tools Associated with:

    Grinding Drilling Turning

    Milling Lathes

    Timken

    Ultra-High SpeedSpindle Grease

    Moderate Speeds

    Light to Moderate Loads

    Moderate Temperatures

    Moderate Water

    GeneralIndustrialApplications

    Pinsand Bushings TrackRollers

    Water Pumps

    Plain and Antifriction Bearings

    TimkenMulti-Use Lithium

    EP1 and EP2 Grease

    High Wear Moderate Loads

    Moderate Speeds

    Moderate Temperatures

    Agriculture Bushings/Ball Joints

    Truckand Auto WheelBearings

    HeavyDutyIndustrial

    Timken Premium

    AllPurpose IndustrialLC-2Grease

    The Timken Company, a global leader in bearing and

    steel technology, understands the importance of friction

    management. The Timken line of application- and

    environment-specific lubricants was developed by leveraging

    our knowledge of tribology and anti-friction bearings and

    how these two elements affect overall system performance.

    Timken lubricants help bearings and related components

    operate effectively in demanding industrial operations. High-

    temperature, anti-wear and water-resistant additives offer

    superior protection in challenging environments.

    Similar to our bearings, all Timken lubrication products

    are backed by highly trained customer service and

    technical support. Industrial customers turn to Timken for

    comprehensive friction management solutions, which extend

    beyond bearings to include delivery systems, lubrication,

    condition monitoring systems, training and bearing repair

    services. We help customers analyze performance and

    recommend options that make sense for their unique

    operating conditions and maintenance intervals.

    Helping customers enhance system performance

    Timken Ultra-High Speed Spindle Grease

    NLGI No.2 polyurea-thickened grease

    Inhibitsrust and oxidationOperating temperaturesfrom-54 C to 149 C (-65 Fto 300 F)

    Specificallydesigned for ballbearings

    Applications:Drills,grinders, lathes,milling machinesand other long-lifapplications

    Availablein: -400g (14.1oz.) cartridges,10/case Part #GR233C-Syringe,6/case Part #GR233SYR

    Timken Premium All Purpose Industrial LC-2 G

    NLGI No.2 extremepressure,l ithium-complexthickened grease

    Solid protection against rust and corrosion

    Excellent protectionagainst wear

    Operating temperature range of -40 C to 149 C (-40 F to 300 F)

    Applications:Ideal for industrialbearingsoperating at higher-than-avertemperaturesand/or subjectedto shock loading,as wellas heavy-dutyon- andoff-road applications,wheel bearings,axles, balljoi nts,U jointspower takeoffs,king pins,bushings, trucks,buses and automobiles

    Availablein: -400g (14.1oz.) cartridges,10/case Part #GR217C-454g (1 lb.) tubs,6/case Part #GR217T-1kg (2.2lb.) tubs Part #GR217F-5kg (11lb.) pail Part # GR217G-16kg (35.3lb.) pail Part #GR217P-55kg (121.3lb.) keg Part #GR217K-180kg (396.8lb.) drum Part #GR217D

    Timken Food Safe Grease

    NLGI No.2 aluminum-complexthickened lubricatinggrease

    Providesfor improved low- and high-temperature performance

    Containsextra-pressure,anti-wear additivesand corrosion and oxidatio

    Operating temperaturesfrom-40 C to 149 C (-40 Fto 300 F)

    Applications:Food processing operations

    Availablein: -400g (14.1oz.) cartridges,10/case Part #GR231C-1kg (2.2lb.) tubs Part #GR231F-16kg (35.3lb.) pail Part #GR231P-55kg (121.3lb.) keg Part #GR231K-180kg (396.8lb.) drum Part #GR231D

    Timken Ball Bearing Pillow Block Grease

    NLGI No.2 polyurea-thickened grease

    Outstanding long-life,moderatelyhigh-temperature lubrication of ballbe

    Maintainsmechanicalshear stability

    Providescorrosion resistance,even in the presence of salt water

    Featureslow-noise characteristicsand excellent pumpability

    Doesnot contain extreme-pressureadditivesbut is inhibited against ruoxidation

    Operating temperaturesfrom-40 C to 163 C (-40 Fto 325 F)

    Applications:Lightly loaded ballbearings in pillow blocksand conveyorin high-temperature environments,including kiln and glasswork applicamotors,chemical manufacturingand noise-sensitive environments,balloperating at mid- to high-speeds(10,000RPM maximum),pumps, fans,eand idler pulleys

    Availablein: -400g (14.1oz.) cartridges,10/case Part #GR220C-1kg (2.2lb.) tubs Part #GR220F-5kg (11lb.) pail Part # GR220G-16kg (35.3lb.) pail Part #GR220P-55kg (121.3lb.) keg Part #GR220K-180kg (396.8lb.) drum Part #GR220D

    NOTE:GR218 hasbeen superceded to GR220.