Upload
rachel-bradford
View
217
Download
1
Embed Size (px)
Citation preview
18.04.2023 1
ArcelorMittal Technotron s.r.o.
Expanded Metal – Fliers and Framings
November 2008
Fliers
Perfect solution to cut costs for each application
STRENGTHSAFETYNON-SLIP
Main advantages of stair steps from expanded metal are easy maintainance, big bearing capacity with small grating weight, anti-slip
effect with safe walk in woman shoes.
18.04.2023Date / time 2Page Number
Fliers
• Load The permissible concentrated force acting on an area of 100 x 100 mm in the flier centre is 1500 N. To select the flier grillage type, apply the same rules as for the framing type selection. A selection procedure and example is given for floor framings
• Material qualityFliers are made as weldments of expanded metal, fixing plates and stiffeners. The expanded metal (3x62.5/15x5 or 3x47/13x5) is manufactured from plates of the steel qualities 11321.1, 11320.10, 11300.10, 11330.30. The fixing plates and stiffeners are made from the same materials as the expanded metal, or from the 11 373.1 steel quality plates.
ArcelorMittal Technotron s.r.o.
3Page Number18.04.2023Date / time
• Surface protection By customer’s request, the fliers are supplied as hot galvanized acc. to DIN 50976, raw without surface protection, varnished or hot galvanized acc. to DIN 50976.
• Flier mounting The flier fixing plates (side edges) are provided with circular and oval holes for screws M12 to attach the flier to the strings. Each flier has to be fixed with 4 screws. The fixing screw pitch can be adjusted by the customer’s request.
Fliers
ArcelorMittal Technotron s.r.o.
4Page Number18.04.2023Date / time
Weight Weight
raw (kg)galvanize
d(kg)240 120 85 4,6 5,1270 150 85 5, 0 5,5305 180 90 5,5 6,1240 120 85 6 6,6270 150 85 6,5 7,2305 180 90 7,1 7,8240 120 85 7,7 8,5270 150 85 8,3 9,1305 180 90 9 9,9240 120 85 9 ,1 10270 150 85 9, 8 10,8305 180 90 10,7 11,8
1000 58
1200
d (mm)
600 44
800
L (mm) W (mm) t (mm) e (mm)
ArcelorMittal Technotron s.r.o.
Supplied dimensions of standardized fliers
5Page Number18.04.2023Date / time
Framings
• Range of application• industrial gangways, stair landings, platforms
including staircases • covers for drains, channels, reservoirs and
shafts in the sphere of water-management • elevated approaches for barrier-free entrance • stair treads and barriers • shelves and stock surfaces
Welded products from expanded metal, circumference frame and length reinforcement.
18.04.2023Date / time 6Page Number
Framings• Material quality
Floor framings are made as weldments of expanded metal, peripheral frames and stiffeners. The expanded metal (62.5/15x5) is manufactured from plates of the steel qualities 11321.1, 11320.10, 11300.10, 11330.30. The peripheral frame and the stiffeners are made from the same material as the expanded metal, or from the 11 373.1 steel quality plates.
• Surface protection The floor framings are supplied without surface treatment, with surface protection by hot galvanizing acc. to DIN 50976, oiled or varnished.
• General guidelines to select the framing type It is essential to proceed as follows: 1. determine the framing load (e.g., from the project or by means of the loading table) 2. enter the support distance, limit deflection or other binding conditions 3. determine the framing type by means of the loading tables
ArcelorMittal Technotron s.r.o.
7Page Number18.04.2023Date / time
Example
Setpoints: - dimensions: span (support distance) L= 750mm, non-bearing width W = 1000 mm
- load: 350 kg/sqm, which corresponds to 3.5 kN/sqm- requirement: an expanded metal framing without special limitations
Solution: - find the nearest satisfactory framing from the expanded metal framing loading tables
- indicate the name in the order: expanded metal framing T62.5 x 15 / 3 x 5 / 30 x 3 / 800 x 1000
Note: The bearing dimension value has been increased by reason of the framing placing on the support. The framing support seating in the stiffeners direction should, if possible,
be at least equal to the stiffeners height, the minimum value is 25 mm.
ArcelorMittal Technotron s.r.o.
8Page Number18.04.2023Date / time
ArcelorMittal Technotron s.r.o.
9Page Number18.04.2023Date / time
Table of recommended framing dimensions
L W H
totalproportio
naltotal
proportional
(mm) (mm) (mm) (kg) (kg/m2) (kg) (kg/m2)400 6 24,9 6,6 27,4600 8,5 23,7 9,4 26800 11,1 23,1 12,2 25,4
1000 13,6 22,7 15 251200 16,2 22,4 17,8 24,7400 7 29,4 7,7 32,3600 9,9 27,6 10,9 30,3800 12,8 26,7 14,1 29,3
1000 15,7 26,1 17,2 28,71200 18,5 25,8 20,4 28,3400 8,1 33,8 8,9 37,2600 11,3 31,5 12,5 34,6800 14,5 30,3 16 33,3
1000 17,7 29,6 19,5 32,51200 20,9 29,1 23 32400 9 28,2 9,9 31600 12,7 26,4 13,9 29800 16,3 25,5 17,9 28
1000 19,9 24,9 21,9 27,41200 23,6 24,6 25,9 27400 10,3 32,3 11,4 35,5600 14,3 29,9 15,8 32,9800 18,4 28,7 20,2 31,6
1000 22,4 28 24,6 30,81200 26,4 27,5 29 30,2400 11 27,4 12,1 30,2600 15,4 25,7 16,9 28,2800 19,8 24,8 21,8 27,2
1000 24,2 24,2 26,6 26,61200 28,6 23,9 31,5 26,2400 12,5 31,3 13,8 34,4600 17,4 28,9 19,1 31,8800 22,2 27,7 24,4 30,5
1000 27 27 29,7 29,71200 31,9 26,5 35 29,2400 14,7 30,7 16,2 33,7600 20,4 28,3 22,4 31,1800 26 27,1 28,6 29,8
1000 31,7 26,4 34,8 291200 37,3 25,9 41,1 28,5
1200 40
800 40
50
1000 40
50
Weight galvanized
600 30
40
50
Weight raw
ArcelorMittal Technotron s.r.o.
10Page Number18.04.2023Date / time
Floor framing loading table
Type of the
stiffenerh x b 500 600 700 800 900 1000 1100 1200
q (kN/m2) 4,54 3,11 2,25 1,7 1,31 1,04 0,84 0,68f (mm) 1,83 2,65 3,62 4,76 6,07 7,56 9,23 11,09q (kN/m2) 10,37 7,16 5,52 3,97 3,11 2,49 2,03 1,69f (mm) 1,21 1,75 2,39 3,13 3,97 4,93 5,99 7,16q (kN/m2) 18,53 12,83 9,38 7,15 5,62 4,52 3,71 3,1f (mm) 0,91 1,31 1,78 2,33 2,96 3,66 4,45 5,31
40 x 3
Load, deformationExpanded metal 62,5 x 15, S=3, E=5 span L (mm)
20 x 3
30 x 3
Loading table
Loading estimate
(kN/m2)Load Individual person 3,4Medium Pedestrians from 3,40 do 4,90Medium heavy Transport and laying light
weightsfrom 4,90 do 9,80
Heavy Transport and laying heavy weights
from 9,80
Transport Truck transport, fork lifts The maximum wheel pressure as the individual load
Load Type of loading
ArcelorMittal Technotron s.r.o.
18.04.2023Date / time 11Page Number
Application
ArcelorMittal Technotron s.r.o.
18.04.2023Date / time 12Page Number
Applicatons:
18.04.2023Date / time 13Page Number