3

FISHING SERVICES

ProductNumber Description Page

ProductNumber Description Page

Alphabetical Index

150-55 Anchor, Bottom Trip ................................................................... 36142-10 Backoff Tool, Casing .................................................................. 15140-13 Backoff Tool, Timmons .............................................................. 16330-66 Bar, Deployment ...................................................................... 105130-16 Basket, Boot .............................................................................. 25130-16 Basket, Thru-Tubing Boot .......................................................... 95130-51 Basket, Venturi Jet ..................................................................... 95130-97 Basket, Combination Ball Type Jet and Junk ............................. 28130-22 Basket, Globe Type Junk ........................................................... 26130-73 Basket, Hydraulic Junk .............................................................. 27130-21 Basket, Internal Boot ................................................................. 29130-19 Basket, Washpipe Boot ............................................................. 25— Bowen Equipment ............................................................ 108-110130-96 Bushing, Jet ............................................................................... 29183-56 Bushing, Kelly Drive ................................................................... 81182-56 Bushing, Pipe Drive ................................................................... 81142-11 Bushing, Tieback Alignment ...................................................... 16154-64 Bushing, Trahan Collapsible Drive ............................................. 81132-20/21 Centralizer, Hydraulic and Hydraulic Drilling ........................... 102132-24 Centralizer, Mechanical Bow Spring ........................................ 102131-23 Circulating Tool, “M”™ Reverse .................................................. 30132-00 Connector, Coiled Tubing .......................................................... 84— Container, Thru-Tubing Fishing Tools ...................................... 107170-03 Cutter, Hydraulic Tubing ............................................................ 97170-03 Cutter, Inside Hydraulic ................................................................ 8170-12 Cutter, Inside Mechanical ............................................................ 7170-08 Cutter, Multi-String ....................................................................... 6171-13 Cutter, Outside Shear Pin ............................................................ 9170-13/14 Cutter, Standard and Washover Outside .................................... 9170-26 Cutter, Wireline .......................................................................... 60132-11 Disconnect, “FAU”™ Safety Hydraulic ........................................ 86132-13 Disconnect, High Load ............................................................... 87132-12 Disconnect, “JD”™ Safety Hydraulic ............................................ 86132-14 Disconnect, Torque Thru-Pull .................................................... 87151-24 Dog Leg Reamer ....................................................................... 22— Fishing Technology Testing Center ............................................. 5— Houston Engineering Equipment ...................................... 111-113132-60 Indexing Tool, Hydraulic ............................................................ 98— Insert, METAL MUNCHER ® Carbide ......................................... 23112-07 Insert, Wilson Mouse Trap ......................................................... 60185-56 Jack System, Casing ................................................................. 80140-24 Joint, Circulation Control ............................................................ 76150-25 Joint, Drilling Safety ................................................................... 69140-41/37 Joint , “J ”™ Type Safety with Pack-Off ....................................... 46132-30/31 Joint, Single and Dual Knuckle ............................................... 103140-38 Joint, Washover Backoff Safety ................................................ 46141-33 Joint, Wilson Type “M”™ J- ....................................................... 65150-30/29 Key Seat Wiper, Double and Single Clutch ............................... 21132-25 Locator, Nipple Profile .............................................................. 103150-79/95 LOCKOMATIC ® Expanding Hole Opener & Section Mill .... 40-41150-98 Mill, Expanding Hydraulic ........................................................... 17151-20 Mill, Hollow, Container and Insert .............................................. 57151-02 Mill, METAL MUNCHER® Junk .................................................. 24140-71 Mill, METAL MUNCHER® Packer .............................................. 24151-21 Mill, METAL MUNCHER® Pilot .................................................. 23150-72 Mill, TRI-STATE™ Model “D”™ Section ....................................... 39151-06 Mill, SUPERLOY® Junk ............................................................. 20151-10 Mill, SUPERLOY® Taper ............................................................ 20151-06 Mill, Thru-Tubing METAL MUNCHER® Junk ............................. 94151-13 Mill, Thru-Tubing METAL MUNCHER® Step ............................. 94151-09 Mills, String and Watermelon ..................................................... 21132-80/81 Motor, Navi-Drill High Torque Mud/Air ...................................... 93111-07 Overshot, Bulldog ...................................................................... 56133-32 Overshot, Continuous ................................................................ 91133-31/30 Overshot, Hydraulic Releasing .................................................. 90110-06 Overshot, Kelo ........................................................................... 56116-07 Overshot, Rolling Dog ................................................................ 55133-34 Overshot, Snipper ...................................................................... 92

114-07 Overshot, T-Dog ........................................................................ 54120-15/121-15 Pack-Off Assembly, Casing and Tubing Spear ................... 53110-59 Pack-Off, High Pressure ............................................................ 58133-33 Pack-Off, High Pressure ............................................................ 91141-36 Packer Retriever, Shear Type .................................................... 64141-32 Packer Retriever, TRI-STATE™ “B”™ ......................................... 66140-31 Packer Retrieving Spear ............................................................ 62747-51 Packer Retrieving Spear, “CJ-1”™ .............................................. 63140-66 Packer Retrieving Spear, Hydraulic ........................................... 61160-23 Patch, Dual Catch Casing .......................................................... 14164-20 Patch, Lead Seal Cementing ..................................................... 14162-20/163-20 Patch, Regular and Slim Series Lead Seal Casing ......... 12-13161-20/160-78 Patch, Rubber Seal Casing and Underwater Casing ........... 11160-21 Patch, Underwater Lead Seal Casing ................................... 12-13161-25 Patch, “ZX”™ High Pressure Casing ........................................... 10140-27 Pulling Tool, Wilson Hydraulic .................................................... 67140-52 ResonanceTool ......................................................................... 78141-10 Reversing Tool, Hydraulic .......................................................... 68161-05 Scraper, TRI-STATE™ 360° Clean Bore Casing ......................... 18811-98 Shifting Tool, “HB-3” Selective Shifting .................................... 104150-10 Shoe, METAL MUNCHER® Rotary ............................................ 45150-08/11 Shoes, SUPERLOY® Rotary ................................................. 44-45170-70 Space-Out Sub Assembly, Ring Type ........................................ 73120-28/122-29 Spear, Center Prong Rope and Crank Shaft Rope ............. 59133-10/11 Spear, Hydraulic Releasing “GS”™ ............................................ 89127-10 Spear, “L”™ Casing .................................................................... 51122-28 Spear, Latch Jack ...................................................................... 60126-09 Spear, TRI-STATE™ “B”™ Casing and Tubing ....................... 48-49126-10 Spear, TRI-STATE™ “C”™ Casing .............................................. 50120-09 Spear, TRI-STATE™ “D”™ Casing and Tubing ...................... 48-49121-09 Spear, TRI-STATE™ “E”™ Casing .............................................. 51122-13 Spear, TRI-STATE™ “E”™ Cut and Pull Casing .......................... 52140-14 Spear, TRI-STATE™ Washover Drill Collar ................................ 47122-14 Spear, Wellhead Cut & Pull ....................................................... 52172-30 Stabilizer, Hydraulic ................................................................... 74171-30 Stabilizer, Sleeve Type Non-Rotating ........................................ 75171-30 Stabilizer, Thru-Tubing Sleeve Type ........................................ 102170-30 Stabilizer, Variable Blade ........................................................... 75811-28 Stroker, Power ......................................................................... 104120-60 Sub, Locking Pin ........................................................................ 72140-61 Sub, Pump-Out .......................................................................... 77132-64/65 Sub, Standard and Lockable Swivel ........................................ 105— SUPERLOY® Tungsten Carbide Hardfacing,TRI-STATE™ ........ 19162-01 Swivel, Backoff .......................................................................... 72170-01 Swivel Marine ............................................................................ 73110-99/121-00 Tap, Box and Taper ........................................................... 70121-01 Tap, Hollow Pin ......................................................................... 71121-01 Tap, Pin ..................................................................................... 71— Thru-Tubing Service ............................................................. 82-83— Tongs, Hydratight .................................................................... 107150-97 Underreamer, “DB”™ .................................................................. 96132-52 Underreamer, Two-Bladed ......................................................... 96200-79 Valve Changer System, Geothermal .......................................... 79132-18 Valve, Dual Actuated Circulating ................................................ 88132-04 Valve, Dual Flapper Back Pressure ........................................... 85132-66 Wash Tool, Spinning ................................................................ 106— Washpipe, N-80 w/W.P. Hydril Connections .............................. 43156-60 Washpipe Specification Guide ................................................... 42150-43 Whipstock, “CT” System ............................................................ 99150-76/50 Whipstock, Mechanical Thru-Tubing Permanent & Retrievable 100-101783-62/58 Whipstock Packer, “ML”™ and “ML” Orientation Anchor ........................ 38415-18 Whipstock Packer, One Trip Hydraulic Set (Annular Set) .......... 35150-64 Whipstock, Rolling Dog Retrieving Overshot ............................. 37150-68 Whipstock System, Cemented ................................................... 33150-74 Whipstock System, Eastman Style ............................................ 32415-18 TorqueMaster™ Whipstock Packer ............................................. 34150-77 WindowMaster™ System ............................................................ 31

4

FISHING SERVICES

Product Number IndexProductNumber Description Page

ProductNumber Description Page

110-06 Overshot, Kelo ........................................................................... 56110-59 Pack-Off, High Pressure ............................................................ 58110-99/121-00 Tap, Box and Taper ........................................................... 70111-07 Overshot, Bulldog ...................................................................... 56112-07 Insert, Wilson Mouse Trap ......................................................... 60114-07 Overshot, T-Dog ........................................................................ 54116-07 Overshot, Rolling Dog ................................................................ 55120-09 Spear, TRI-STATE™ “D”™ Casing and Tubing ...................... 48-49120-15/121-15 Pack-Off Assembly, Casing and Tubing Spear ................... 53120-28/122-29 Spear, Center Prong Rope and Crank Shaft Rope ............. 59120-60 Sub, Locking Pin ........................................................................ 72121-01 Tap, Hollow Pin ......................................................................... 71121-01 Tap, Pin ..................................................................................... 71121-09 Spear, TRI-STATE™ “E”™ Casing .............................................. 51122-13 Spear, TRI-STATE™ “E”™ Cut and Pull Casing .......................... 52122-14 Spear, Wellhead Cut & Pull ....................................................... 52122-28 Spear, Latch Jack ...................................................................... 60126-09 Spear, TRI-STATE™ “B”™ Casing and Tubing ....................... 48-49126-10 Spear, TRI-STATE™ “C”™ Casing .............................................. 50127-10 Spear, “L”™ Casing .................................................................... 51130-16 Basket, Boot .............................................................................. 25130-16 Basket, Thru-Tubing Boot .......................................................... 95130-19 Basket, Washpipe Boot ............................................................. 25130-21 Basket, Internal Boot ................................................................. 29130-22 Basket, Globe Type Junk ........................................................... 26130-51 Basket, Venturi Jet ..................................................................... 95130-73 Basket, Hydraulic Junk .............................................................. 27130-96 Bushing, Jet ............................................................................... 29130-97 Basket, Combination Ball Type Jet and Junk ............................. 28131-23 Circulating Tool, “M”™ Reverse .................................................. 30132-00 Connector, Coiled Tubing .......................................................... 84132-04 Valve, Dual Flapper Back Pressure ........................................... 85132-11 Disconnect, “FAU”™ Safety Hydraulic ........................................ 86132-12 Disconnect, “JD”™ Safety Hydraulic ............................................ 86132-13 Disconnect, High Load ............................................................... 87132-14 Disconnect, Torque Thru-Pull .................................................... 87132-18 Valve, Dual Actuated Circulating ................................................ 88132-20/21 Centralizer, Hydraulic and Hydraulic Drilling ........................... 102132-24 Centralizer, Mechanical Bow Spring ........................................ 102132-25 Locator, Nipple Profile .............................................................. 103132-30/31 Joint, Single and Dual Knuckle ............................................... 103132-52 Underreamer, Two-Bladed ......................................................... 96132-60 Indexing Tool, Hydraulic ............................................................ 98132-64/65 Sub, Standard and Lockable Swivel ....................................... 105132-66 Wash Tool, Spinning ................................................................ 106132-80/81 Motor, Navi-Drill High Torque Mud/Air ...................................... 93133-10/11 Spear, Hydraulic Releasing “GS”™ ............................................ 89133-31/30 Overshot, Hydraulic Releasing .................................................. 90133-32 Overshot, Continuous ................................................................ 91133-33 Pack-Off, High Pressure ............................................................ 91133-34 Overshot, Snipper ...................................................................... 92140-13 Backoff Tool, Timmons .............................................................. 16140-14 Spear, TRI-STATE™ Washover Drill Collar ................................ 47140-24 Joint, Circulation Control ............................................................ 76140-27 Pulling Tool, Wilson Hydraulic .................................................... 67140-31 Packer Retrieving Spear ............................................................ 62140-38 Joint, Washover Backoff Safety ................................................ 46140-41/37 Joint , “J ”™ Type Safety with Pack-Off ....................................... 46140-52 ResonanceTool ......................................................................... 78140-61 Sub, Pump-Out .......................................................................... 77140-66 Packer Retrieving Spear, Hydraulic ........................................... 61140-71 Mill, METAL MUNCHER® Packer .............................................. 24141-10 Reversing Tool, Hydraulic .......................................................... 68141-32 Packer Retriever, TRI-STATE™ “B”™ ......................................... 66141-33 Joint, Wilson Type “M”™ J- ....................................................... 65141-36 Packer Retriever, Shear Type .................................................... 64142-10 Backoff Tool, Casing .................................................................. 15

142-11 Bushing, Tieback Alignment ...................................................... 16150-08/11 Shoes, SUPERLOY® Rotary ................................................. 44-45150-10 Shoe, METAL MUNCHER® Rotary ............................................ 45150-25 Joint, Drilling Safety ................................................................... 69150-30/29 Key Seat Wiper, Double and Single Clutch ............................... 21150-43 Whipstock, “CT” System ............................................................ 99150-55 Anchor, Bottom Trip ................................................................... 36150-64 Whipstock, Rolling Dog Retrieving Overshot ............................. 37156-60 Washpipe Specification Guide ................................................... 42150-68 Whipstock System, Cemented ................................................... 33150-72 Mill, TRI-STATE™ Model “D”™ Section ....................................... 39150-74 Whipstock System, Eastman Style ............................................ 32150-76/50 Whipstock, Mechanical Thru-Tubing Permanent & Retrievable.... 100-101150-77 WindowMaster™ System ............................................................ 31150-79/95 LOCKOMATIC ® Expanding Hole Opener & Section Mill .... 40-41150-97 Underreamer, “DB”™ .................................................................. 96150-98 Mill, Expanding Hydraulic ........................................................... 17151-02 Mill, METAL MUNCHER® Junk .................................................. 24151-06 Mill, SUPERLOY® Junk ............................................................. 20151-06 Mill, Thru-Tubing METAL MUNCHER® Junk ............................. 94151-09 Mills, String and Watermelon ..................................................... 21151-10 Mill, SUPERLOY® Taper ............................................................ 20151-13 Mill, Thru-Tubing METAL MUNCHER® Step ............................. 94151-20 Mill, Hollow, Container and Insert .............................................. 57151-21 Mill, METAL MUNCHER® Pilot .................................................. 23151-24 Dog Leg Reamer ....................................................................... 22154-64 Bushing, Trahan Collapsible Drive ............................................. 81160-21 Patch, Underwater Lead Seal Casing ................................... 12-13160-23 Patch, Dual Catch Casing .......................................................... 14161-05 Scraper, TRI-STATE™ 360° Clean Bore Casing ......................... 18161-20/160-78 Patch, Rubber Seal Casing and Underwater Casing ........... 11161-25 Patch, “ZX”™ High Pressure Casing ........................................... 10162-01 Swivel, Backoff .......................................................................... 72162-20/163-20 Patch, Regular and Slim Series Lead Seal Casing ......... 12-13164-20 Patch, Lead Seal Cementing ..................................................... 14170-01 Swivel Marine ............................................................................ 73170-03 Cutter, Hydraulic Tubing ............................................................ 97170-03 Cutter, Inside Hydraulic ................................................................ 8170-08 Cutter, Multi-String ....................................................................... 6170-12 Cutter, Inside Mechanical ............................................................ 7170-13/14 Cutter, Standard and Washover Outside .................................... 9170-26 Cutter, Wireline .......................................................................... 60170-30 Stabilizer, Variable Blade ........................................................... 75170-70 Space-Out Sub Assembly, Ring Type ........................................ 73171-13 Cutter, Outside Shear Pin ............................................................ 9171-30 Stabilizer, Sleeve Type Non-Rotating ........................................ 75171-30 Stabilizer, Thru-Tubing Sleeve Type ........................................ 102172-30 Stabilizer, Hydraulic ................................................................... 74183-56 Bushing, Kelly Drive ................................................................... 81182-56 Bushing, Pipe Drive ................................................................... 81185-56 Jack System, Casing ................................................................. 80200-79 Valve Changer System, Geothermal .......................................... 79330-66 Bar, Deployment ...................................................................... 105415-18 Whipstock Packer, TorqueMaster™ ............................................ 34415-18 Whipstock Packer, One Trip Hydraulic Set (Annular Set) .......... 35747-51 Packer Retrieving Spear, “CJ-1”™ .............................................. 63783-62/58 Whipstock Packer, “ML”™ and “ML” Orientation Anchor ...................... 38811-28 Stroker, Power ......................................................................... 104811-98 Shifting Tool, “HB-3” Selective Shifting .................................... 104— Bowen Equipment ............................................................ 108-110— Container, Thru-Tubing Fishing Tools ...................................... 107— Fishing Technology Testing Center ............................................. 5— Houston Engineering Equipment ...................................... 111-113— Insert, METAL MUNCHER ® Carbide ......................................... 23— SUPERLOY® Tungsten Carbide Hardfacing, TRI-STATE™ ....... 19— Tongs, Hydratight .................................................................... 107— Thru-Tubing Service ............................................................. 82-83— Washpipe, N-80 w/W.P. Hydril Connections .............................. 43

5

FISHING SERVICES

Fishing TechnologyTesting CenterBossier City, Louisiana

The Fishing Technology Testing Centerin Bossier City, Louisiana includes thefishing industry’s most complete testingfacility. Here, testing is conducted onprojects ranging from research and de-velopment prototypes to modificationsto existing equipment, in an environmentthat simulates realistic downhole condi-tions.

The centerpiece of the Technology Cen-ter is a test rig whose components in-clude:

• 142-ft Dreco mast rated at 750,000 lbs(340,000 kg) lifting capacity whenrigged with 12 lines

• Continental-Emsco GA350-ESingle Drum Drawworks

• Continental-Emsco T-275053-1/4" Rotary Table

• Gardner Denver PZ10 1350 HPTriplex Pump with output of496 gal/min at 4200 psi (1860 liters/min at 290 bar) maximum pressure

• Bowen Model S-1E Power Swivel

• Bowen 3.5 Power Swivel which maybe used as a top drive

• Hydraulic testing unit

• Appropriate tubulars, BOPs, kill andchoke manifolds, tuggers andhandling tools

• Casing sizes from 4-1/2" to 20"for testing purposes

Th B k Oil T l T h l

6

FISHING SERVICES

MULTI-STRING CUTTERProduct No. 170-08The Multi-String Cutter is designed to cutsingle or multiple strings of concentric oreccentric casing. The cutter is hydrauli-cally operated. The fluid path is throughan indicator nozzle into the piston whichforces out the cutter knives. Once thecutter knives are fully extended, the indi-cator nozzle carrier will unseat from thepiston causing a loss in pressure, indi-cating that the cut is complete. Theindicator nozzle is easily changed toaccommodate low pump capacity.

The Multi-String Cutter can be usedin any cutting application where rotationand pressure can be applied to the tool.In subsea applications, a marine swivelor cut and pull spear are required.

When performing casing repair orcutting and pulling operations for a slotrecovery, safeguards must be taken toassure the outer casing is not damaged.For this type of operation, the Multi-String Cutter may be ordered with spacerand stop rings which will restrict thereach of the cutter knives.

FEATURES/BENEFITS• Rugged design can withstand extreme

shock loads during cutting• Knives can be easily changed at the

rig floor• Knives can be dressed with either

SUPERLOY® or METAL MUNCHER ®

inserts• Large piston area reduces amount of

surface pressure required to operatecutter

• Variety of knives and cutters will covercomplete range of API casings

• Nozzles can be easily changed to ac-commodate available flow rate

• Cutter can be set to cut single stringsonly

Multi-String CutterProduct No. 170-08

SPECIFICATION GUIDE

Designed to Cut Top Cutter OD Max Knife Diameter

(In.) Connection (In.) (In.)(mm) (mm) (mm)

4 - 5-1/2 2-3/8 API Reg 3-1/8 6-3/8101,6 - 139,7 79,4 162,0

4-1/2 - 6-5/8 2-7/8 API Reg 3-3/4 8101,6 - 168,3 95,3 203,0

5-1/2 - 9-5/8 2-7/8 API Reg 4-1/2 13-1/8139,7 - 244,6 114,3 333,0

7 - 13-3/8 3-1/2 API Reg 5-1/2 16-1/4177,8 - 339,7 139,7 413,0

7 - 13-3/8 3-1/2 API IF 5-3/4 16-1/2177,8 - 339,7 146,1 419,0

8-5/8 - 20 4-1/2 X-Hole 7-1/4 21-3/4219,1 - 508 184,2 552,0

9-5/8 - 30 6-5/8 API Reg 8-1/4 45-3/8244,6 - 762 209,6 1153,0

13-3/8 - 60 6-5/8 API Reg 11-3/4 49-1/2339,7 - 1524 298,5 1257,0

7

FISHING SERVICES

Inside Mechanical CutterProduct No. 170-12

INSIDE MECHANICALCUTTERProduct No. 170-12The Inside Mechanical Cutter is designedto cut single strings of casing withouthydraulics. The cutter consists of a fric-tion assembly that initiates the setting ofthe slips. The slip assembly anchors thecutter inside the casing. The cut is madeby lowering the drillstring while rotating.This forces the knives down on the wedgeblock forcing the knives outward until thecasing is cut.

The cutter incorporates an automaticnut design which, when the tool is el-evated, sets cutter back into the run-inposition. This makes it possible to setand unset the tool, as many times asrequired, or to make multiple cuts.

The Inside Mechanical Cutter is wellsuited for a cutting operation where theintegrity of an outer string must be main-tained. Because the tool is operated bymechanics, the cutter is ideally suited forland abandonments where pumps arenot available.

Designed to Cut (In.) 4 5 6-5/8 8-1/8 8-5/8 9-5/8 13-3/8(mm) 101,6 127,0 168,2 206,3 219,0 244,4 339,7

Cutter OD (In.) 3 4 5-1/4 6-7/8 7-1/8 8 11-3/4(mm) 76,2 101,6 133,4 174,6 181,0 203,2 298,5

Max Cut of Knife (In.) 4-5/8 6-3/8 8-5/16 9-7/8 10 11-1/2 16-1/8(mm) 117,5 161,9 211,1 250,8 254,0 292,1 409,6

Top Connection 2-3/8 2-7/8 3-1/2 4-1/2 5-1/2 5-1/2 6-5/8FJ API Reg API IF API IF API Reg API Reg API Reg

SPECIFICATION GUIDE

FEATURES/BENEFITS• Tools easily convert to alternate cut-

ting sizes• Unique automatic nut allows tool to be

set repeatedly without pulling out ofthe hole

• Cutter is mechanically operated — nohydraulics required

• Positive anchor assembly ensures asmooth cut

• Knives can be made from tool steel orfitted with carbide inserts

• Knife design reduces risk of damageto outer casing

8

FISHING SERVICES

Inside Hydraulic CutterProduct No. 170-03

INSIDE HYDRAULIC CUTTERProduct No. 170-03The Inside Hydraulic Cutter is designedto cut single strings of casing hydrauli-cally. The cutter features hydraulicallyactivated knives for smooth efficient cut-ting, an indicator which signals throughpump pressure when the cut is com-plete, and stabilizer slips to keep thecutter anchored in the casing. The pis-tons are designed to force the slips tofirmly anchor the tool prior to the knivescontacting the casing.

When the cutter has been run to thedesired cutting depth, rotation is initiatedand circulation started. An increase intorque indicates that casing is being cut.When the cut is complete, the controldog will move into a recess in the bottomnut causing a decrease in pump pres-sure, indicating that the cut is complete.Straight pick up will retract the slips andknives.

The Inside Hydraulic Cutter shouldalways be run with a float sub.

Cutter OD (In.) 4-1/8 5-1/2 5-3/4 8-1/8 11-3/4(mm) 104,8 139,7 146,1 206,4 298,5

Max Cut of Knife (In.) 7 7 7-5/8 10-3/4 13-3/8(mm) 177,8 177,8 193,7 273,1 339,7

Top Connection 2-7/8 3-1/2 3-1/2 4-1/2 4-1/2API IF API IF API IF API IF API IF

SPECIFICATION GUIDE

FEATURES/BENEFITS• Tools easily convert to alternate cut-

ting sizes• Cutter is hydraulically operated; no

string movement required• Positive anchor assembly ensures a

smooth cut• Knives can be made from tool steel or

fitted with carbide inserts• Knife design reduces risk of damage

to outer casing• Positive indication when cut is made

9

FISHING SERVICES

STANDARD AND WASHOVEROUTSIDE CUTTERSProduct Nos. 170-13 & 170-14The Standard and Washover OutsideCutters are mechanically operated cut-ting tools used to cut and recover tubularsfrom the outside in one trip. The maincomponents are the knives, dog assem-bly, and wedge block.

Both cutters require the outside ofthe fish to be free. It is best to washoverwith a rotary shoe and washpipe down todesired cutting depth prior to running thecutter. Once the fish has been washedover, the rotary shoe is replaced with thecutter. After the cutter has passed overthe fish, the workstring should not beelevated until the cutter is at the desiredcutting depth. Once reaching the de-sired depth of the cut, the string shouldbe elevated to locate a collar or tool joint.The string is then slacked off to take theload of the knives prior to cutting. In adeviated well, the string will have to beslacked off further to eliminate the risk ofdamage to the knives by overloadingagainst the tool joint or collar.

The tool is operated by pulling the dogassembly up under a collar or tool jointwhile rotating. The dog assembly willforce the wedge block down which forcesthe knives in until the cut is complete.

Once the cut is complete, the cutterand fish can be pulled out of the hole andthe fish stripped out of the washpipe.The cut left by the outside cutter will besmooth on the OD and just slightly flaredto the ID. To engage externally and runwireline would require no dressing off.

FEATURES/BENEFITS• Cuts can be made on tubulars with

plugged IDs• Cut is clean and requires no dressing• The cut is made mechanically• Simple design and operation• Large variety of sizes for special

applications• Knives made from tool steel, heat-

treated, and contour ground for effec-tive cutting

OUTSIDE SHEAR PIN CUTTERProduct No. 171-13The Outside Shear Pin Cutter is a me-chanically operated tool used to cut andremove tubing or drillpipe from thewellbore. The Outside Shear Pin Cutterallows the maximum ratio of fish OD tocutter OD of any outside cutter. Due tothis feature, the cutter is not as rugged asthe washover and standard outside cut-ter. The shear-type cutter is used onlywhen no other cutter may be used due tofish OD. (No illustration shown.)

FEATURES/BENEFITS• Smallest ratio of fish OD to cutter OD

of any outside cutter• Cuts are clean and require no

dressing off• Mechanically operated• All parts constructed from AISI 4140

heat-treated alloy steel• Knives made from tool steel, heat-

treated and contour ground foreffective cutting

STANDARD OUTSIDE CUTTERPRODUCT NO. 170-13

SPECIFICATION GUIDEOD of (In.) 3-13/16 4-1/16 4-17/32 4-11/16 5- 5/8 6 6-1/8Cutter (mm) 96,8 103,2 115,1 119,1 142,9 152,4 155,6ID of (In.) 3-1/8 3-5/32 3-5/8 3-25/32 4-5/8 4-7/8 5-1/8Cutter (mm) 79,4 80,2 92,1 96,6 117,5 123,8 130,2Connection 3-13/16 4 4-1/2 4-1/2 5-3/8 5-3/4 6

TSWP TSWP TSWP TSWP TSWP TSS TSWP

OD of (In.) 7-11/16 8-5/16 9-3/8 11-3/8 12 14-1/4 16-3/4Cutter (mm) 195,3 211,1 238,1 288,9 304,8 362,0 425,5ID of (In.) 6-1/4 6-13/16 7-7/8 9-7/8 10-3/4 11-7/8 15Cutter (mm) 158,8 173,0 200,0 250,8 273,1 301,6 381,0Connection 7-5/8 8-1/8 9 10-3/4 11-3/4 12-3/4 16

TSWP TSWP TSWP TSWP TSWP TSWP TSWP

Standard Outside CutterProduct No. 170-13

Washover Outside CutterProduct No. 170-14

10

FISHING SERVICES

“ZX” ™ HIGH PRESSURECASING PATCHProduct No. 161-25The “ZX” (Zero Extrusion) High PressureCasing Patch utilizes the same technol-ogy that has made the “ZXP” ™ LinerPacker the industries most reliable LinerPacker. The “ZX” Patch offers the high-est pressure rating of any casing patch,in most cases equal to a premium thread.This pressure rating makes this designideal for tying back high pressure wells.The “ZX” design encloses the seals in ametal to metal barrier between the cas-ing and the patch body, protecting theseals from exposure to damaging fluidsor gases. The design is modular so thepatch body may be run above a standardovershot. A top sub with the desiredcasing thread may be run above thepatch or an extension for underwaterpatching operations. The patch is de-signed to fit over the entire API tolerancerange for each casing size. There is nosetting load required because the sealsare self-energizing.

Although not recommended, in testenvironments the patch has been testedon unprepared casing. In these test, the9-5/8" patch has withstood 12,000 PSI(827 bar) internal pressure, with fluidand nitrogen, with temperatures up to250°F using standard seal compounds.Higher temperature thresholds may beachieved with special seal materials.

FEATURES/BENEFITS• Simple design and operation• Requires no setting load• Highest pressure rating of any patch• Adaptability due to modular design• Utilizes proven “ZX” technology

“ZX” High Pressure Casing PatchProduct No. 161-25

11

FISHING SERVICES

Rubber Seal Casing PatchProduct No. 161-20

ing pressure testing may produce forceswhich cause the casing patch slips todamage the patched casing stub.

Construction of the standard RubberSeal Casing Patch makes the conver-sion to an Underwater Casing Patchsimple. The top-sub may be removed,allowing cross-over bushings and a cas-ing pup-joint to be made up directly abovethe rubber seals. This modification doesnot affect the tensile or pressure ratingon the patch.

If the casing repair is close to the topof the cement, the Rubber Seal Under-water Casing Patch makes it possible topatch the casing without the requiredfree casing needed to set a Lead SealCasing Patch. (Rubber Seal UnderwaterCasing Patch is not shown.)

FEATURES/BENEFITS• Simple design and operation• Requires no setting load• Higher pressure rating• Rubber seal less affected by tempera-

ture fluctuations• Easily converted to an underwater patch

The chart below is a sample of themaximum working pressures and isbased on 80% of burst.

RUBBER SEAL CASING PATCHAND RUBBER SEAL UNDER-WATER CASING PATCHProduct Nos. 161-20 & 160-78The Rubber Seal Casing Patch is de-signed to repair damaged casing or tie-back casing efficiently and economically.No setting load is required to energizethe seals. This allows for a simple de-sign with less moving parts. The pres-sure rating for the rubber seals exceedthat of the Standard Lead Seal CasingPatch. The patches are available in sizesto patch from 4-1/2" to 20" casing.

As with standard lead seal patches,the casing stub to be patched must befree of any cement on the OD and the topmust be free of burrs. It is best in oldercasing strings to washover the casingstub with a shoe dressed to the drift ID ofthe casing patch. With a proper dressingshoe, the top of the casing will be left witha 45° angle reducing the risk of damageto the seal assembly.

Once the casing patch has swallowedthe casing stub completely, the casing ispatched and may be pressure tested asper customer requirements. If over pull isrequired, this will not affect the seal as-sembly. Caution: Excessive over pull dur-

Casing Maximum Working Maximum Overpull Size Weight Grade Pressure (No Tension) at Maximum Pressure

In. mm lbs/ft kg/m psi Bar lbs kg7 177,8 29 43,1 N-80 6528 450,20 151,500 104487 177,8 29 43,1 P-110 8480 584,82 187,300 686297 177,8 32 47,6 N-80 7248 499,86 175,700 795927 177,8 32 47,6 P-110 8480 584,82 187,300 84847

9-5/8 244,5 47 69,9 N-80 5496 379,03 294,800 1335449-5/8 244,5 47 69,9 P-110 7552 520,82 394,600 1787539-5/8 244,5 53.50 79,5 N-80 6334 436,82 352,500 1596829-5/8 244,5 53.50 79,5 P-110 8720 601,37 517,400 234382

10-3/4 273,0 51 76,05 J-55 4030 277,93 90,000 4090910-3/4 273,0 51 76,05 N-80 5860 404,13 112,000 5090910-3/4 273,0 51 76,05 P-110 8060 555,86 134,700 6122710-3/4 273,0 60.7 90,5 J-55 4880 336,55 361,200 16418110-3/4 273,0 60.7 90,5 N-80 7100 489,65 428,000 19454513-3/8 339,7 68 101,1 K-55 3450 237,93 81,200 3678313-3/8 339,7 72 107 N-80 5380 371,03 58,700 2659113-3/8 339,7 72 107 C-95 6390 440,68 56,000 25368

Casing Size (In.) 4-1/2 5-1/2 7 7-5/8 8-5/8 9-5/8(mm) 114,3 139,7 177,8 193,7 219,1 244,5

Patch OD (In.) 5-13/16 7-1/4 8-3/8 9-3/8 10-9/16 11-7/8(mm) 147,6 184,2 212,7 238,1 268,3 301,6

Casing Size (In.) 10-3/4 11-3/4 13-3/8 16 20 —(mm) 273,1 298,5 339,7 406,4 508

Patch OD (In.) 13-1/2 14-1/2 16-1/2 19 23-3/8 —(mm) 342,9 368,3 419,1 482,6 593,7

SPECIFICATION GUIDE

The chart below is a sample of the maximum working pressures and is based on 80% of burst on the lesser component, i.e., patch or casing.

12

FISHING SERVICES

REGULAR AND SLIM SERIESLEAD SEAL CASING PATCHProduct Nos. 162-20 & 163-20The Lead Seal Casing Patch is used torepair damaged casing and to tie backcasing strings, after temporary aban-donments when tie-back assemblies in-place fail. To patch a casing string, thedamaged casing must be removed to apoint where the casing integrity is stillsound. Once the lower string of casinghas been engaged by the patch, a rec-ommended setting load must be appliedwhich will energize the patch by deform-ing the lead making an effective seal onthe casing.

The casing stub to be patched mustbe free of any cement on the OD and thetop must be free of any burrs. It is best inolder casing strings to washover thecasing stub with a shoe dressed to thedrift ID of the casing patch. With a properdressing shoe, the top of the casing willbe left with a 45° angle which will reducethe risk of damage to the lead-sealassembly.

Once the casing patch has swal-lowed the casing stub completely, therecommended setting load must be ap-plied and held. At this time, the casingmay be pressure tested as per customerrequirements. If additional over pull isrequired, this may affect the integritybetween the patch and the lower string ofcasing. The safe operating parametersof the patch should be followed. (SlimSeries Lead Seal Casing Patch drawingis not shown.)

FEATURES/BENEFITS• Simple design and operation• Does not restrict casing ID• Manufactured from AISI 4140

heat-treated alloy steel

UNDERWATER LEADSEAL CASING PATCHProduct No. 160-21The Underwater Lead Seal Casing Patchutilizes the same design as the Standardand Slim Series Lead Seal CasingPatches with the addition of a long topsub to allow the patch to be run below asubsea casing hanger. The top exten-sions are made from API casing pupjoints or alloy steel tubing. The underwa-ter casing patch is most often used toallow space out for a subsea hangerafter a casing string has become stuckwhile running in the hole.

When the underwater casing patch isto be used, the casing should be cut asufficient length from the stuck point.This allows the casing to be stretchedfrom below to energize the casing patch.The cut casing must then be dressed offto reduce the risk of any damage to thelead seal assembly. The patch is spacedout from the subsea casing hanger toallow the lower casing stub to completelypass the slip assembly. The casing isrun and the casing hanger landed off inthe wellhead. At this point, the lowercasing stub should be past the slipassembly.

A Tri-State Type “B”™ Casing Spearcan be run in and latched into the lowercasing stub. The lower casing is thenstretched enough to energize the patchonce the tension has been released.

FEATURES/BENEFITS• Simple design and operation• Does not restrict casing ID• Manufactured from AISI 4140

heat-treated alloy steel

Regular Lead Seal Casing PatchProduct No. 162-20

13

FISHING SERVICES

Casing Maximum Working Maximum Overpull Size Weight Grade Pressure (No Tension) at Maximum Pressure

In. mm lbs/ft kg/m psi Bar lbs kg

7 177,8 29 43,1 N-80 6496 448 136,100 61653

7 177,8 29 43,1 P-110 8930 615,86 177,500 80407

7 177,8 32 47,6 N-80 7248 499,86 109,500 49603

7 177,8 32 47,6 P-110 8930 615,86 215,900 97802

9-5/8 244,5 47 69,9 N-80 5496 379,03 141,400 64054

9-5/8 244,5 47 69,9 P-110 7552 520,82 220,700 99977

9-5/8 244,5 53.50 79,5 N-80 6344 437,51 218,400 98935

9-5/8 244,5 53.50 79,5 P-110 6800 486,96 220,700 99977

10-3/4 273,0 51 76,05 J-55 4030 277,86 63,000 28576

10-3/4 273,0 51 76,05 N-80 5800 399,90 75,000 34019

10-3/4 273,0 51 76,05 P-110 6348 437,68 210,000 95284

10-3/4 273,0 60 90,5 J-55 4800 330,95 223,000 101151

10-3/4 273,0 60 90,5 N-80 6300 434,37 271,000 12924

13-3/8 339,7 68 101,1 K-55 3450 237,93 66,700 30215

13-3/8 339,7 72 107 N-80 5380 371,03 58,700 26591

13-3/8 339,7 72 107 C-95 5770 397,93 113,100 51234

REGULAR SERIES LEAD SEAL CASING PATCHPRODUCT NO. 162-20

SPECIFICATION GUIDE

Casing Size (In.) 4-1/2 5 5-1/2 6 6-5/8 7 7-5/8(mm) 114,3 127,0 139,7 152,4 168,3 177,8 193,7

Patch OD (In.) 5-13/16 6-3/16 7 7-1/2 8-3/8 8-3/4 9-3/8(mm) 147,6 157,2 177,8 190,5 212,7 222,3 238,1

Casing Size (In.) 8-5/8 9-5/8 10-3/4 11-3/4 13-3/8 16 20(mm) 219,1 244,5 273,1 298,5 339,7 406,4 508,0

Patch OD (In.) 10-9/16 11-1/2 13 14 15-5/8 18-1/4 22-1/4(mm) 268,3 292,1 330,2 355,6 396,9 463,6 565,2

Underwater Lead Seal Casing PatchProduct No. 160-21

UNDERWATER LEAD SEAL CASING PATCHPRODUCT NO. 160-21

SPECIFICATION GUIDE

Casing Size (In.) 7 7-5/8 9-5/8 9-5/8 10-3/4 10-3/4 13-3/8 13-3/8 (mm) 177,8 193,7 244,5 244,5 273,1 273,1 339,7 339,7

Patch OD (In.) 8-3/8 9-3/8 11-1/2 12-3/4 12-1/8 13 15-1/8 17 (mm) 212,7 238,1 292,1 323,9 308,0 330,2 384,2 431,8

Extension Material Alloy Casing Alloy Casing Alloy Alloy Alloy Casing

Extension OD (In.) 8-3/8 8-5/8 10-3/4 11-3/4 12-1/8 13 15-1/8 16(mm) 212,7 219,1 273,1 298,5 308,0 330,2 384,2 406,4

Casing Size (In.) 4-1/2 5-1/2 7 7-5/8 8-5/8 9-5/8 10-3/4 13-3/8(mm) 114,3 139,7 177,8 193,7 219,1 244,5 273,1 339,7

Patch OD (In.) 5-5/8 6-3/4 8-1/4 8-11/16 10 10-7/8 12-1/8 14-3/4(mm) 142,9 171,5 209,6 221,0 254,0 276,2 308 374,7

SLIM SERIES LEAD SEAL CASING PATCHPRODUCT NO. 163-20

SPECIFICATION GUIDE

The chart below is a sample of the maximum working pressures for the Lead Seal Casing Patches and is based on 80% of burst.

14

FISHING SERVICES

LEAD SEALCEMENTING PATCHProduct No. 164-20The Lead Seal Cementing Patch is usedto patch a string of casing and cementinto the annulus of the patched string inone trip.

The casing stub to be patched mustbe free of any cement on the OD and thetop must be free of any burrs. It is best inolder casing strings to washover thecasing stub with a shoe dressed to thedrift ID of the casing patch. With a properdressing shoe, the top of the casing willbe left with a 45° angle which will reducethe risk of damage to the lead sealassembly.

Once the casing patch has swal-lowed the casing stub completely, setdown 10,000 to 15,000 lbs (4545 kg to6818 kg) on the patch. The top of thecasing should be shouldered against thetop sub of the patch. The recommendedsetting load is then applied. Slack off25% of the setting load and test thepatch. After the test is complete, thestring is once again slacked off to allowthe lower casing stub to contact theshoulder of the patch. This will open thecementing ports in the patch. After ce-menting, pick up to the original settingload. The setting load should be main-tained while curing the cement.

Cementing PatchProduct No. 164-20

Dual Catch Casing PatchProduct No. 160-23

FEATURES/BENEFITS• Simple design and operation• Does not restrict casing ID• Manufactured from AISI 4140 heat-

treated alloy steel• Allows patch to be set and cement

pumped to annulus without additionaltrips

• Eliminates need for cementing collar

DUAL CATCH CASING PATCHProduct No. 160-23The Dual Catch Casing Patch utilizes alead-seal assembly and an additionallower slip which helps prevent the loss ofseal due to elongation or distortion of thecasing when the patch is set. Like theunderwater casing patch, the dual catchhas a 10 ft top extension manufacturedfrom an API casing pup joint or alloysteel.

The same casing preparation andsetting procedures used for the under-water casing patch are used for the DualCatch Casing Patch.

FEATURES/BENEFITS• Does not restrict casing ID• Manufactured from AISI 4140 heat-

treated alloy steel• Allows better protection against seal

failure

DUAL CATCH CASING PATCHPRODUCT NO. 160-23

SPECIFICATION GUIDE

CEMENTING PATCHPRODUCT NO. 164-20

SPECIFICATION GUIDE

Casing Size (In.) 4-1/2 5-1/2 7 7-5/8 8-5/8 9-5/8 10-3/4 11-3/4 13-3/8(mm) 114,3 139,7 177,8 193,7 219,1 244,5 273,1 298,5 339,7

Patch OD (In.) 6-1/2 7-7/16 9-1/8 9-7/8 11-1/8 11-7/8 14 14-3/4 16(mm) 165,1 189,0 231,8 251,0 282,6 301,6 355,6 374,7 406,4

Casing Size (In.) 5-1/2 7 9-5/8 10-3/4 13-3/8 16 20(mm) 139,7 177,8 244,5 273,1 339,7 406,4 508,0

Patch OD (In.) 7-3/4 9 12 13 16 19 25-1/2(mm) 196,9 228,6 304,8 330,2 406,4 482,6 647,7

15

FISHING SERVICES

CASING BACKOFF TOOLProduct No. 142-10The Casing Backoff Tools are hydraulically operated downholebreakout tools used to back off casing at a known coupling location.They are often used as an alternative to running a casing patchduring a casing repair program. The tool has three main compo-nents: the lower anchor section, the drive section, and the upperanchor section. Drill collars are run below the lower anchor to allowthe anchor to remain set during the backoff operation. Severalstands of collars are run above the upper anchor to allow the anchorto remain set when pump pressure is being applied to overcome thehydraulic upward force during the back off operation.

The tool is assembled and run in the well to the desired depth.A mechanical collar locator can be used to pinpoint the collar to bebacked off, and the back-off tool can then be positioned to straddlethe collar. The anchor sections are set hydraulically and once theanchors have been set do not pick up on the workstring. The toolis then cycled by pump pressure until breakout is accomplished.The pumps are then stopped and the pressure bleed off. The toolshould sit for about five minutes to reset itself. After several cyclesof the tool, the pump is turned off and the workstring picked up,which releases slips. The backoff is completed and casing recov-ered with an appropriate spear.

Tool OD (In.) 4-1/2 5-5/8 5-5/8 8 8 8 8(mm) 114,3 142,9 142,9 203,2 203,2 203,2 203,2

Connection 3-1/2 3-1/2 3-1/2 6-5/8 6-5/8 6-5/8 6-5/8API Reg API IF API IF API Reg API Reg API Reg API Reg

Casing Size (In.) 5-1/2 7 7-5/8 9-5/8 10-3/4 11-3/4 13-3/8and Weight (mm) 139,7 177,8 193,7 244,5 273,1 298,5 339,7

(lb/ft) 14 - 23 17 - 38 24 - 47.1 32 - 53.5 32.75 - 65.7 42 - 60 48 - 72(kg/m) 20,81-34,18 25,27-56,48 35,67-70,00 47,56-79,52 48,68-97,65 62,42-89,18 71-1/3

Maximum Torque5000psi Output 15,000 25,000 25,000 50,000 50,000 50,000 50,000at (ft/lb)

Maximum TorqueOutput at 11111 18518 18518 37037 37037 37037 37037344,8 bar (Nm)

SPECIFICATION GUIDE

FEATURES/BENEFITS• Eliminates “blind” backoffs of casing• High torque breakout capacity• Anchor sections contain special carbide insert slips which make

firm bites into casing ID to withstand torque output of tool• Leaves threaded connection for re-engaging with new casing

string• Maintains full casing integrity when casing is screwed back

together properly• Eliminates restricted IDs after repairing casing• No left-hand workstrings required for backoff• Over torquing of joints in workstring is eliminated• Can be used with tubing as a workstring, if necessary

Upper Anchor

Drive Section

Lower Anchor

16

FISHING SERVICES

TIMMONS BACKOFF TOOLProduct No. 140-13The Timmons Backoff Tool is used totransmit torque through a workstring tocasing at a desired point. The design isextremely simple and reliable. In mostcases, the limiting factor in torque re-striction is the workstring. All Timmonstools have a left-hand box on one endand a right-hand connection on the otherend.

When backing off casing, theTimmons tool is run with a left-hand tooljoint connection up, and left-handed pipeto surface. The tool can be set at any-time by simply rotating to the left. Thetool is released by right-hand rotation.For making up casing, the tool is run withthe right-hand connection up on right-handed pipe.

FEATURES/BENEFITS• The tool will ensure that the casing

does not back out at a higher point• When making up casing, the joints of

casing above the make-up point willnot be over torqued

• The opposing cam design eliminatesany risk of slipping

• High torque breakout capacity - lim-ited by workstring only

• Simple design• The same tool is used for breakout

and makeup

Tieback Alignment BushingProduct No. 142-11

TIEBACK ALIGNMENTBUSHINGProduct No. 142-11The Tieback Alignment Bushing is usedas a guide for a casing tieback string.The guide allows easy alignment whileminimizing the risk of thread damage.The guide bushing is primarily used whentying back premium thread strings ofcasing.

The guide bushing is designed foreasy field dressing to allow for box or pinlooking up. There is no welding requiredand no risk to pressure integrity.

FEATURES/BENEFITS• Eliminates need for internal guide string• Reduces risk of damage to threads• Can be easily dressed at rig site to tie

back to pin or box• Constructed of AISI 4140 heat-treated

alloy steel• Can be manufactured with any type

thread• Tieback will be completely threaded -

Pressure rating as per threadmanufacturer’s specifications

Casing Size (In.) 7 7-5/8 8-5/8 9-5/8 13-3/8 20(mm) 177,8 193,7 219,1 244,5 339,7 508,0

Top Connection 3-1/2 3-1/2 3-1/2 6-5/8 6-5/8 6-5/8API IF API IF API IF API Reg API Reg API Reg

left-hand left-hand left-hand left-hand left-hand left-hand

Bottom Connection 3-1/2 3-1/2 3-1/2 4-1/2 4-1/2 4-1/2API IF API IF API IF API IF API IF API IF

TIMMONS BACKOFF TOOLPRODUCT NO. 140-13

SPECIFICATION GUIDE

Timmons Backoff ToolProduct No. 140-13

TIEBACK ALIGNMENT BUSHINGPRODUCT NO. 142-11

SPECIFICATION GUIDECasing OD (In.) 7 9-5/8 13-3/8

(mm) 177,8 244,5 339,7

Guide OD (In.) 8-1/4 12 15(mm) 209,6 304,8 381,0

17

FISHING SERVICES

Expanding Hydraulic MillProduct No. 150-98

EXPANDINGHYDRAULIC MILLProduct No. 150-98The Expanding Hydraulic Mills are runabove drill bits or mills to open the casingID to a greater diameter than drift. Theycan be used to scrape the casing ID toremove scale or cement prior to runninga packer, and can also function as hy-draulic stabilizers to centralize whencutting casing. Blades can be dressedwith Metal Muncher® style, carbide in-serts to remove steel or cement, or withhard metal for stabilizing. Various weightsof the same size casing can be milledwith one set of blades, due to the uniquedesign of the stop collars on tool.

Prior to running, the stop collars aremechanically set to maintain true full-bore gauge milling and reaming. Theexpanding mill is made up to the mill orbit and run in the hole with sufficient drillcollar to maintain 2000 to 5000 lbs (454to 2272 kg) of weight on bottom. Nozzlesin the bit or expanding mill should besized to provide a suggested pressuredrop of 500 psi (34,48 bar), which willkeep the blades expanded during mill-

Casing OD (In.) 5-1/2 7 7-5/8 8-5/8 9-5/8(mm) 139,7 177,8 193,7 219,1 244,5

Weight (lb) 14 - 23 23 - 38 24 - 39 28 - 44 32,30 - 53,50(mm) 20,8 - 34,2 34,2 - 56,5 35,7 - 58 41,6 - 65,4 48 - 79,5

Connections 2-3/8 API Reg 3-1/2 API Reg 3-1/2 API Reg 4-1/2 API Reg 4-1/2 API Reg

Closed OD (In.) 4-1/4 5-5/8 6-3/8 7 8(mm) 108,0 142,9 161,9 177,8 203,2

SPECIFICATION GUIDE

ing. Suggested RPM range for the mill isbetween 60 and 150 RPM. Light weightshould be maintained on the mill, andtorque monitored closely. When therestriction has been removed, the holeis circulated clean and the pumpsare stopped retracting the bladesautomatically.

FEATURES/BENEFITS• Rugged design enables tool to

expand and scrape casing ID andfunction as a hydraulic stabilizerwhen cutting casing

• Unique stop collar design allowsvarious weights of the same sizecasing to be milled with one setof blades

• Blades are available with METALMUNCHER® carbide inserts or hardmetal coating

• Constructed of AISI 4140 heat-treatedalloy steel

• Can be run through restricted ID

18

FISHING SERVICES

360° Clean Bore Casing ScraperProduct No. 161-05

TRI-STATE™ 360° CLEANBORE CASING SCRAPERProduct No. 161-05The Tri-State 360° Clean Bore CasingScraper cleans cement, mud, embed-ded perforating bullets, rust, scale, par-affin, perforation burrs, and other restric-tions from the inside walls of casing.

The casing scraper is run with the pinup and a bit or a mill is installed on thebox end below. Consequently, the bitserves as a guide and prevents pluggingthe circulation hole through the scraper.

The scraper is passed through therestricted section, preferably without ro-tation. This cleans most of the scale,bullets, cement, and other extraneousmaterials off the casing wall. Rotatingthe tool as the string is lowered causesthe helix surfaces to shear off any re-maining burrs or obstructions missed onthe first pass with the scraper.

The scraper is rerun to check forsmoothness before tripping out of thehole. If the weight indicator does notshow any irregularities, the casing shouldbe clean.

In. In. In. In. lb/ft mm- kg/m lb/ft mm- kg/m lb/ft mm- kg/m lb/ft mm- kg/m

Casing Scraper Size 4-1/2 114,3 5-1/2 139,7 6-5/8 168,3 7 177,85-1/2 139,7 6 152,4 7-5/8 193,7

Connection 2-3/8 2-7/8 2-7/8 3-1/2API Reg API Reg API Reg API Reg

Scraper OD 3-9/16 90,5 4-3/8 111,1 5-1/8 130,2 5-3/8 136,5Scraper ID 3/4 19 1 25,4 1 25,4 1-1/4 31,7Blade Part Number 2-135 2-142 2-142-1 2-102-1Casing Size 4-1/2 114,3 5-1/2 139,7 6-5/8 168,3 7 177,8Weight Range (9.5-15.1) (14,1-22,4) (14- 23) (20,8-34,2) (20-24) (29,7-35,7) (17-20) (25,3-29,7)Blade Part Number 2-135 2-142-1 2-142 2-102-1Casing Size 5 127 6 152,4 6-5/8 168,3 7-5/8 193,7Weight Range (21.5-24.1) (31,9-35,8) (16-23) (23,8-34,2) (28-32) (41,6-47,6) (24-42.8) (35,7-63,6)Blade Part Number 2-135 2-102Casing Size 5 127 — — — — 7 177,8Weight Range (11.5-18) (17,1-26,7) (23-32) (34,2-47,6)Blade Part Number 2-133-1 2-102-2Casing Size 5-1/2 139,7 — — — — 7 177,8Weight Range (20-23) (29,7-34,2) (35-38) (52-56,5)

Casing Scraper Size 8-5/8 219,1 9-5/8 244,5 10-3/4 273 13-3/8 339,7Connection 4-1/2 4-1/2 6-5/8 6-5/8

API Reg API Reg API Reg API RegScraper OD 7-1/4 184,2 8 203,2 9 228,6 11-1/4 285,8Scraper ID 2 50,8 2-1/4 57,1 2-1/4 57,1 3-1/2 88,9Blade Part Number 2-102 2-102-1 2-1441-3Casing Size 8-5/8 219,1 9-5/8 244,5 10-3/4 273 — —Weight Range (24-32) (35,7-47,6) (32.2) (47,9) (32.75-40.5) (48,7-60,2)Blade Part Number 2-102-2 2-102 2-1441-3 2-1441-3Casing Size 8-5/8 219,1 9-5/8 244,5 10-3/4 273 13-3/8 339,7Weight Range (36-49) (53,5-72,8) (36-53.5) (53,5-79,5) (45.5-55.5) (67,6-82,5) (48-68) (71,3-101,1)Blade Part Number 2-102-2 2-1144Casing Size — — — — 10-3/4 273 13-3/8 339,7Weight Range (60.7-71.1) (89,2-105,5) (72-91) (107-135,3)

SPECIFICATION GUIDE

FEATURES/BENEFITS• Body constructed from a solid piece of

AISI 4140 heat-treated alloy steel forstrength

• Hardfaced blades provide enduranceand maximum service

• Cleaning can be accomplished by ei-ther rotation or reciprocation as a re-sult of blade arrangement in the bodythat gives full 360° contact with thecasing ID

• Each blade is cut with left-hand helicalgrooves to allow the tool to scrape upor down inside the casing

• Double protection downhole resultsfrom blades held securely by bladeretainers locked in place by keepers

19

FISHING SERVICES

TRI-STATE™ SUPERLOY ® TUNGSTENCARBIDE HARDFACINGBaker Oil Tools tungsten carbide is the finest hardfacingmaterial available for downhole steel cutting or milling tools.Each step in SUPERLOY manufacturing assures uniformityand quality. The crushed sintered tungsten particles aresuspended in a special copperbase brazing-type alloy withhigh nickel content. SUPERLOY has a tensile strength of10,000 psi.

MANUFACTURING PROCESS

1. Carbide selection - Only the finest steel cutting grade isused in making SUPERLOY. There are two basic grades oftungsten carbide, one suitable for cutting steel and the otherhighly resistant to abrasive wear. These carbides are verysimilar and require a special process to separate the grades.

2. Hand selected chips - After crushing, the solid chips arehand picked to assure sharp cutting edges. This personal,hand selection process eliminates any slivers, fish scales, orrounded chips which might deter maximum cutting efficiency.

FEATURES/BENEFITS• Tight control of manufacturing process assures uniformity

and quality• Highest quality cutting carbide used• Rod form for easy application

3. Rod composition - Chips are screened for uniformity in sizeand shape. All chips that go into a specified size of SUPERLOYrod are identical in size to ensure the proper buildup on thetool being hardfaced.

4. Ultimate control - SUPERLOY rod is made in a thermo-statically controlled furnace under rigidly supervised condi-tions. The time/temperature relationship is closely monitoredto ensure that every carbide particle is completely tinned.

5. Individual attention to each rod - Each rod is hand cleanedafter leaving the furnace and individually flux coated. Thisextra special coating speeds the application of the rod to thebase metal being hardfaced.

SIZES AND PACKAGINGAll SUPERLOY rods are 18" (457 mm) long and vary in diameter from 1/4" to 1/2" (6,5 mm to 12,7 mm) depending on chip size.Rods are sealed in plastic bags and packaged in 10 lbs (4,5 kg) boxes. Rod size is determined by chip size. For example: 1/2"x 7/16" (12,7 mm x 11,1 mm) rod is composed of tungsten carbide chips that will pass through a 1/2" (12,7 mm) mesh screen andbe caught by a 7/16" (11,1 mm) mesh screen.

20

FISHING SERVICES

SUPERLOY ® JUNK MILLProduct No. 151-06Junk Mills are designed to mill rock bits,reamer blades, or any other debris whichmay obstruct a wellbore. The junk millshave four basic designs.

The “J-1”™ Junk Mill is manufacturedfrom a solid piece of 4140 heat-treatedalloy. The water course and stabilizerpads are machined out and theSUPERLOY is applied as per set weld-ing procedures. The OD of the millinghead and stabilizer, if present, are bothground smooth to eliminate any risk ofcasing damage. The longer milling headsalso reduce the risk of casing damage orside-tracking.

The “J-2”™ is identical in design to the“J-1” except that the OD of the mill isrough. The “J-2” is used only in open-hole situations.

The “J-3”™ and “J-4”™ are weldedblades on the milling head and the stabi-lizer pads. The “J-3” is dressed withSUPERLOY then ground smooth forcased hole applications. The “J-4” isrough OD for open-hole applications.

All junk mills have standard pin-upAPI Reg connections. The connectionwill be dependent on the mill OD.

FEATURES/BENEFITS• Extra long mill heads reduce risk of

casing damage• Dressed with SUPERLOY• Rugged design• Available for all hole sizes• Manufactured from AISI 4140 heat-

treated alloy steel

SUPERLOY® TAPER MILLProduct No. 151-10Taper Mills are designed to enter re-stricted areas in casing, tubing, or open-hole and remove restrictions or obstruc-tions by milling. Taper mill designs varybased on the intended use. Taper millsdesigned for use inside casing aredressed with SUPERLOY from the re-duced OD at the bottom of the mill to thefull drift of the casing. Once full drift ODis reached, the taper mill will have alength of smooth, turned downSUPERLOY for stabilization, minimizingany unnecessary casing damage. Foropen-hole applications the roughSUPERLOY cutting structure would ex-tend over the entire dressed area of themill.

Taper mills are also used in casingmilling operations so debris inside thecasing stub can be removed as the cas-ing is milled and as to act as a guidewhen re-entering the casing stub. Whenrun with a section mill, the taper mill actsas a stabilizer reducing vibration; thereby,increasing section mill life.

FEATURES/BENEFITS• Allows control to hold mill inside the

casing better than a conventional junkmill

• Milling restrictions from the casing IDincrementally

• Manufactured from AISI 4140 heat-treated alloy steel

• Dressed with SUPERLOY

Superloy Taper MillProduct No. 151-10

Superloy Junk MillProduct No. 151-06

21

FISHING SERVICES

STRING ANDWATERMELON MILLSProduct No. 151-09The String and Watermelon Mills aredesigned with many functions in mind.The primary function of the mills is toelongate casing windows during a whip-stock operation. They can also be usedto remove obstructions in casing. In openhole, they can be used to ream throughkey seats. These type mills are often runabove section mills so any bird nesting ofcuttings accumulating at the top of thewindow can be milled away to ensurethat the section mill can be pulled out ofthe hole. Most of the mills have a stan-dard drillpipe or drill collar connection toeliminate cross-overs.

FEATURES/BENEFITS• Allows control to hold mill inside the

casing better than a conventional junkmill

• Mills restrictions from the casing IDincrementally

• Manufactured from AISI 4140 heat-treated alloy steel

• Dressed with SUPERLOY• May be inserted into workstring at any

point

DOUBLE AND SINGLECLUTCH KEY SEAT WIPERProduct Nos. 150-30 & 150-29The Key Seat Wiper is used to remove orprevent key seats from forming in severedog leg situations. The key seat wiper isconstructed from AISI 4140 heat-treatedsteel. The blades are dressed with eitherSUPERLOY or tube borium. The bladesare usually dressed to 1/2" larger thanthe OD of the drill collars.

The key seat wiper is usually runbetween the drill collars and the heavyweight or drillpipe. When the key seatwiper pulls into a key seat, the sleeve willwedge and stick. This can be confirmedby slacking off and having 20" of freetravel and free rotation. By rotating whilepicking up, the bottom clutch will trans-mit torque to the sleeve to wipe out thekey seat.

The double clutch key seat wiperincorporates a left-hand clutch on the topof the sleeve. This design makes it pos-sible to jar the sleeve out of a key seat byapplying weight and slowly rotating tothe right.

FEATURES/BENEFITS• Non-rotating while drilling - will not

damage wellbore while drilling• Simple design and operation• Dressed with SUPERLOY

DOUBLE AND SINGLE CLUTCH KEY SEAT WIPERPRODUCT NOS. 150-30 & 150-29

SPECIFICATION GUIDE

Single Clutch

Connection 3-1/2 4 4-1/2 4-1/2 4-1/2 4-1/2API IF FH X-Hole X-Hole API IF API IF

Sleeve OD (In.) 4-3/4 6 6-1/8 6-1/4 6-1/2 7-3/4(mm) 120,7 152,4 155,6 158,8 165,1 196,9

Double Clutch

Connection 3-1/2 4 4-1/2 4-1/2 4-1/2 —API IF FH X-Hole FH API IF

Sleeve OD (In.) 4-3/4 6 6-1/8 6-1/4 6-1/2 —(mm) 120,7 152,4 155,6 158,8 165,1

Double and Single ClutchKey Seat Wiper

Product Nos. 150-30 & 150-29

String/Watermelon MillProduct No. 151-09

22

FISHING SERVICES

DOG LEG REAMERProduct No. 151-24The Dog Leg Reamer was designed toprovide a means by which an offset in thecasing may be removed to allow a liner tobe run to bridge the dog leg.

The tool consist of a milling section, aknuckle section and an articulated sec-tion. The articulated section provides apilot into the well bore below the offset toeliminate the risk of an accidental side-track. The sealed knuckle section pro-vides a primary rotation point that isadjacent to the bottom of the mill. Themilling section consist of several sleevesthat are rotationally locked onto the body.The sleeves are dressed with METALMUNCHER inserts for maximum millingefficiency.

FEATURES/BENEFITS• METAL MUNCHER technology for

efficient milling• Replaceable mill sleeves for easy

field dressing• Knuckle joint can pivot up to 15°

before binding will occur• Sealed Knuckle Joint allows

circulation for hole cleaning

Dog Leg ReamerProduct No. 151-24

Casing Size Tool OD Connection

In. mm In. mm

5-1/2 140 4.75 120,65 2-7/8 API I Reg

7 178 6.241 158,52 3-1/2 API IF

SPECIFICATION GUIDE

23

FISHING SERVICES

METAL MUNCHER ®

CARBIDE INSERTIn 1985 TRI-STATE changed the fishing industryforever with the introduction of the METALMUNCHER Carbide Insert. The insert and thepatented application of the insert to milling toolshas increased penetration rates and mill life by asmuch as a 1000%. The slot recoveries that areroutine today are economically possible becauseof this technology. Many of the problems asso-ciated with hole cleaning have been reduced bythe smaller chips produced by the chip breakerinsert.

Many of the jobs that were traditionally per-formed by SUPERLOY dressing have been en-hanced by this technology. The aggressive na-ture of the insert makes it ideal for milling specialalloy metals. The pattered and constant removalof material means a reduction in the risk of work-hardening high chrome tubulars and packers.

Both METAL MUNCHER Junk Mills andMETAL MUNCHER Packer Mills haveSUPERLOY backing behind the insert. Conse-quently, if there is an insert failure, there is still thereliability of SUPERLOY to continue the job. Inseveral cases where drillpipe has been cementedinto a well, the use of METAL MUNCHER insertson junk mills have recovered hole faster thanconventional washing over and recovering.

The METAL MUNCHER Insert is most com-monly associated with pilot mills but is availableon section, junk, expanding, and window mills.

FEATURES/BENEFITS• Higher penetration rates• Smaller cuttings• Extended mill life• Aggressive cutting structure for

cutting alloys

METAL MUNCHER ® PILOT MILL (patented)

Product No. 151-21The METAL MUNCHER Pilot Mill is a high-perfor-mance mill used for milling washover pipe, casing,and liners. The blade design continuously indexesa new cutting surface during milling. The insertdesign produces small, uniform, and easy to handlecuttings.

The METAL MUNCHER Pilot Mill should berun with a shock sub and sufficient drill collars toprovide a wide range of milling weights. Bothweight on mill and RPMs will be determined bypenetration rate, torque, and cuttings removal.Pilot milling with the METAL MUNCHER insertsshould be treated as a machining process ratherthan a milling process. Once the optimum weightand RPM is established it should be adhered to.

The fast R.O.P. of the tool, allows up to tentimes the volume of cuttings in a given period oftime as conventional pilot mills. This will require amud system capable of suspending the cuttingsand carrying them to the surface. A mud with“high, low” shear values has been effective incuttings removal. Special consideration should begiven to additional surface equipment to handlecuttings.

METAL MUNCHER Pilot Mills are available tocut all standard sizes of casing and can be manu-factured for any size. The mills can be manufac-tured with a connection down for milling applica-tions that are too close to surface to run sufficientdrill collar weight above the mill.

FEATURES/BENEFITS• Increased rates of penetration• Smaller cuttings• Long mill life

METAL MUNCHER PILOT MILLPRODUCT NO. 151-21

SPECIFICATION GUIDECasing Size (In.) 4-1/2 5 5-1/2 6-5/8 7 7-5/8

(mm) 114,3 127 139,7 168,3 177,8 193,7Connection 2-3/8 2-7/8 3-1/2 4-1/2 4-1/2 4-1/2

API Reg API Reg API Reg API Reg API Reg API RegBlade OD (In.) 5-1/2 6-1/16 6-9/16 7-7/8 8-5/32 9

(mm) 139,7 154 166,7 200 207,2 228,6Casing Size (In.) 8-5/8 9-5/8 10-3/4 11-3/4 13-3/8 —

(mm) 219,1 244,5 273,1 298,5 339,7Connection 4-1/2 6-5/8 6-5/8 6-5/8 6-5/8 —

API Reg API Reg API Reg API Reg API RegBlade OD (In.) 10-1/8 11-1/8 12-1/4 13-1/4 14-7/8 —

(mm) 257,2 282,6 311,2 336,6 377,8

METAL MUNCHERPilot Mill

Product No. 151-21

24

FISHING SERVICES

METAL MUNCHER ®

JUNK MILLProduct No. 151-02The METAL MUNCHER Junk Mill is de-signed for milling stationary obstructions.The junk mill utilizes the patented METALMUNCHER technology as the lead cut-ting structure while being backed up bySUPERLOY tungsten carbide hard fac-ing. With the SUPERLOY backup, if theMETAL MUNCHER inserts become dam-aged the mill will perform like a standardjunk mill until a new row of inserts isreached.

The mills have been used to millcemented tubing, in some cases, at ratesexceeding 30 ft per hour. Cemented drillcollars and drillpipes have in many casesbeen milled faster than they could bewashed over and recovered.

FEATURES/ BENEFITS• Increases penetration rates• Increases mill life• Smaller cuttings• SUPERLOY backup means the mill

will mill comparable to standardSUPERLOY Junk Mill

• Constructed of AISI 4140 heat-treatedalloy steel

• Can be applied to any size mill

METAL MUNCHER Packer MillProduct No. 140-71

METAL MUNCHER Junk MillProduct No. 151-02

METAL MUNCHER ®

PACKER MILLProduct No. 140-71The METAL MUNCHER Packer Mill isdesigned for milling packers in the short-est possible time without creating largedebris. The packer mill utilizes the pat-ented METAL MUNCHER technologyas the lead cutting structure while beingbacked up by SUPERLOY tungsten car-bide hard facing. With the SUPERLOYbackup, if the METAL MUNCHER in-serts become damaged the mill will per-form like a standard packer mill until anew row of inserts is reached.

The METAL MUNCHER Packer Millcan be used with most packer retrievingspears. The aggressive cutting struc-ture of the inserts make these mills idealfor the milling of Inconel and high chromeharsh environment packers.

FEATURES/BENEFITS• Increases penetration rate• Increases mill life• Smaller cuttings• By milling the entire packer away, large

pieces of packer debris are eliminated• SUPERLOY backing means the mill

will mill comparable to standardSUPERLOY Packer Mill

• Constructed of AISI 4140 heat-treatedalloy steel

25

FISHING SERVICES

BOOT BASKETProduct No. 130-16Boot Baskets are used to trap cuttingswhich are too large to circulate out of thehole during drilling, milling, or junk fish-ing operations. The design of the bootbasket traps junk by producing a suddendecrease in annular velocity when thecuttings pass the larger OD of the bootreaching the smaller OD of the body andtop connection.

The boot basket should be run asclose as possible to the mill, bit, or junkbasket. Milling procedures are carriedout as usual with normal circulation.Additional boot baskets may be run intandem to increase the junk catchingcapacity.

FEATURES/BENEFITS• Simple design and operation• Contracted from AISI 4140 heat-

treated alloy steel• Can be run in tandem• Box-down, pin-up design so that boot

basket may be run directly above a millor bit

• May be ordered with 10" or 20" longbaskets

WASHPIPE BOOT BASKETProduct No. 130-19The Washpipe Boot Basket has multiplefunctions in a washover assembly. Likethe standard Boot Basket, the Washpipeboot basket is used to trap cuttings toolarge to be circulated out. The washpipeconnection eliminates the need for across-over bushing. The Washpipe BootBasket with the third inner connection, isused for packer milling and retrievingoperations. In both operations, compo-nents of the BHA are eliminated reduc-ing the risk of BHA failure.

The Washpipe Boot Basket is avail-able in most of the smaller washpipesizes. The inner connections are avail-able with 8 round or PRT connections.

FEATURES/BENEFITS• Reduces cross-overs in workstring• The first drop in annular velocity oc-

curs at the boot catcher• Simple design and operation• Manufactured from AISI 4140

BOOT BASKETPRODUCT NO. 130-16

SPECIFICATION GUIDE

Connection 1 MT 1-1/4 MT 1-1/2 MT

Boot OD (In.) 1.813 2.250 2.300 2.500(mm) 46 57 58 63

Connection 2-3/8 API Reg 2-7/8 API Reg 3-1/2 API Reg

Boot OD (In.) 3-5/16 3-1/2 4 5 5-1/2(mm) 84,1 88,9 101,6 127,0 139,7

Connection 4-1/2 API Reg 6-5/8 API Reg

Boot OD (In.) 6-5/8 7 8-5/8 9-5/8 10-3/4 12-3/4(mm) 168,3 177,8 219,1 244,5 273,1 323,9

Washpipe Boot BasketProduct No. 130-19

Boot BasketProduct No. 130-16

26

FISHING SERVICES

GLOBE TYPE JUNK BASKETProduct No. 130-22The Globe Type Junk Basket is used to recover any type of small objects that maybe in the wellbore. It is a simple design which consists of a hollow milling head, adouble set of free rotating finger catchers, middle body, and top sub. The successfuloperation of the tool requires that a core be cut from the formation. Any junk that mayhave obstructed normal drilling will be recovered above the core. If no recovery ismade, but a good core is recovered, in most cases normal drilling may continue.Because it cannot produce any reverse circulating action or vacuum, the Globe TypeJunk Basket is primarily used in open hole.

The Globe Type Junk Basket converts easily to a Jet Type Basket by installinga Jet Bushing between the top sub and the body of the Globe Type Junk Basket.

FEATURES/BENEFITS• Simple design and operation• Does not require ball to operate• Converts to Jet Type Basket

Globe Type Junk BasketProduct No. 130-22

SPECIFICATION GUIDE

Minimum Head OD Head ID Body OD Connection

(In.) 4 3-1/32 4 2-3/8 API Reg(mm) 101,6 77,0 101,6

(In.) 4-5/8 3-13/32 4-1/2 2-7/8 API Reg(mm) 117,5 86,5 114,3

(In.) 5-1/2 4-5/16 5-1/2 3-1/2 API Reg(mm) 139,7 109,5 139,7

(In.) 5-7/8 4-13/16 5-1/2 3-1/2 API Reg(mm) 149,2 122,2 139,7

(In.) 6-1/4 5-7/16 5-3/4 3-1/2 API Reg(mm) 158,8 138,1 146,1

(In.) 7-1/8 5-5/8 7-1/8 4-1/2 API Reg(mm) 181,0 142,9 181,0

(In.) 7-3/8 6-3/16 7-3/8 4-1/2 API Reg(mm) 187,3 157,2 187,3

(In.) 7-7/8 6-17/32 7-3/8 4-1/2 API Reg(mm) 200,0 165,9 187,3

(In.) 8-1/4 7-3/16 8-1/8 4-1/2 API Reg(mm) 209,6 182,6 206,4

(In.) 9 6-17/32 8-5/16 4-1/2 API Reg(mm) 228,6 165,9 211,1

(In.) 10-1/4 7-11/16 10-1/8 6-5/8 API Reg(mm) 260,4 195,3 257,2

(In.) 11-1/4 9-1/8 10-3/8 6-5/8 API Reg(mm) 285,8 231,8 263,5

(In.) 14-1/2 12-3/8 13-3/4 6-5/8 API Reg(mm) 368,3 314,3 349,3

27

FISHING SERVICES

Hydraulic Junk BasketProduct No. 130-73

HYDRAULIC JUNK BASKETProduct No. 130-73The Hydraulic Junk Basket is a pressureoperated junk recovery tool. It consistsof a basket head, catcher, sleeve, pistonassembly, and top sub. The piston as-sembly contains a first stage piston todrive the catcher down and collapseunder the junk. The second stage of thepiston assembly allows the tool to drainwhile pulling out of the hole avoiding awet string. Once the catcher has beenclosed, it offers 360° recovery surface.One ball is used to operate the catch anddrain feature of the tool.

In operation, the Hydraulic Junk Bas-ket is run to bottom and the hole circu-lated down to the fish. Once washing iscomplete, the ball should be dropped

while off bottom. Lower tool back tobottom (DO NOT CUT A CORE) andstart the pumps with the fill-up line open.Slowly close the fill-up line until the pres-sure shears the shear pin. This will forcethe piston down closing the catcher andshifting the inner piston so the string maybe pulled dry.

The catcher is a disposable item. If itis necessary to rerun the junk basket, thecatcher must be replaced.

FEATURES/BENEFITS• 360° recovery surface• Cutting of core not required• Easily field dressed• Two stage piston assembly eliminates

need to pull wet string

SPECIFICATION GUIDEHole Size 3-3/4 - 3-7/8 4-1/8 - 4-3/4 6-1/8 - 6-3/4 6-1/2 - 6-3/4 7-3/8 - 7-7/8

Body OD (In.) 3-3/8 4 5-3/4 6-1/4 7-5/16(mm) 85,7 101,6 146,1 158,8 185,7

Catch ID (In.) 2-19/32 3-1/32 4-1/4 4-11/16 5-11/16(mm) 65,9 77,0 108,0 119,1 144,5

Max. Dressed OD (In.) 3-3/4 4-3/4 6-3/4 6-3/4 7-7/8(mm) 95,3 120,7 171,5 171,5 200,0

Top Connection (Box) 2-3/8 2-7/8 3-1/2 3-1/2 4-1/2API Reg API Reg API Reg API Reg API Reg

Ball OD (In.) 7/8 1 1 1 1(mm) 22,2 25,4 25,4 25,4 25,4

Minimum Pressureto Close Catcher (psi) 1800 2000 2000 2000 2000

(bar) 124,14 137,93 137,93 137,93 137,93

Shear Pin Size (In.) 1/8 5/32 7/32 7/32 7/32(mm) 3,2 4,0 5,6 5,6 5,6

Hole Size 7-7/8 - 9 8-5/8 - 9 9-1/2 - 11 11-1/2 - 13-3/4 17-1/2 - 20

Body OD (In.) 7-13/16 8-1/4 9-1/4 11-3/8 16-1/2(mm) 198,4 209,6 235,0 288,9 419,1

Catch ID (In.) 6-13/32 6-27/32 7-7/16 9-21/32 14(mm) 162,7 173,8 188,9 245,3 355,6

Max. Dressed OD (In.) 8-3/4 9 10-3/4 12-3/4 17-1/2(mm) 222,3 228,6 273,1 323,9 444,5

Top Connection (Box) 4-1/2 4-1/2 4-1/2 6-5/8 6-5/8API Reg API Reg API IF API Reg API Reg

Ball OD (In.) 1 1-11/16 1-11/16 1-5/8 2(mm) 25,4 42,9 42,9 41,3 50,8

Minimum Pressureto Close Catcher (psi) 2000 2000 2000 2000 2000

(bar) 137,93 137,93 137,93 137,93 137,93

Shear Pin Size (In.) 7/32 7/32 1/4 1/4 5/16(mm) 5,6 5,6 6,4 6,4 7,9

28

FISHING SERVICES

COMBINATION BALL TYPEJET AND JUNK BASKETProduct No. 130-97The Combination Ball Type Jet and JunkBasket is a single tool that has a combi-nation reverse circulation and coringability allowing two junk recovery opera-tions in one run. In the first operationusing high velocity, the tool jet assemblydiverts drilling fluid out of the jet nozzlesdown the OD of the tool. Then the fluidgoes up through the bottom of the tooland forces any junk items such as bitcones and hand tools up into the ID of thebushing. The caught debris is held by thecatchers attached to the tool. To com-plete the recovery, the tool is rotated andlowered into the formation to core up anyremaining junk.

Prior to dropping the ball, fluid iscirculated through the ID to wash overthe junk. After bottom has been tagged,the string is picked up off bottom to dropthe ball. Once the ball has seated in thejet assembly a seat-pump pressure willshift the plunger and begin reverse circu-

lation. Fluid circulation then rewashesover the junk and forces it up into thebasket while rotating between 30 and 60RPMs. A small core may be cut at thispoint to ensure that all junk will be re-trieved.

FEATURES/BENEFITS• Eliminates pulling a wet string after

coring junk• When sheared, jet assembly acts as a

drain when tripping out of hole• One-trip complete recovery is ensured

by combination reverse circulation andcoring ability

• Body tool parts constructed of AISI4140 heat-treated alloy steel

• Ceramic jet nozzles are durable, cor-rosion resistant, and economical toreplace

• Four basic tools have subassembliesto cover hole sizes from 3-3/4" through17-1/2"

• Can be used to core samples andream under gauge holes to reach junkon bottom

Combination Ball Type Jetand Junk Basket

Product No. 130-97

Sub AssembliesBushing and Basket Head OD (In.) 3-1/2 4 4-5/8

(mm) 88,9 101,6 117,5Catcher ID (In.) 2-23/32 3-1/32 3-13/32

(mm) 69 76,9 86,5Jet Assembly Steel Ball Diameter (In.) 7/8 7/8 7/8

(mm) 22,2 22,2 22,2

4-1/2 API Regular Combination Ball Type Jet and Junk Basket

3-1/2 API Regular Combination Ball Type Jet and Junk Basket

2-3/8 API Regular Combination Ball Type Jet and Junk Basket

Sub AssembliesBushing and Basket Head OD (In.) 5-1/2 5-7/8 6-1/4 7-1/8

(mm) 139,7 149,2 158,8 181Catcher ID (In.) 4-3/32 4-5/16 4-13/16 5-7/16

(mm) 103,9 109,5 122,2 138,1Jet Assembly Steel Ball Diameter (In.) 1-1/16 1-1/8 1-1/8 1-1/8

(mm) 26,4 28,6 28,6 28,6

Sub AssembliesBushing and Basket Head OD (In.) 7-7/8 8-1/4 9

(mm) 200 209,6 228,6Catcher ID (In.) 6-3/16 6-1/2 7-1/16

(mm) 157,1 165,1 179,3Jet Assembly Steel Ball Diameter (In.) 1-11/16 1-11/16 1-11/16

(mm) 42,9 42,9 42,9

Sub AssembliesBushing and Basket Head OD (In.) 10-1/4 11-1/4 14-1/2

(mm) 260,4 285,8 368,3Catcher ID (In.) 7-13/16 9-1/8 12-1/16

(mm) 198,4 231,7 306,3Jet Assembly Steel Ball Diameter (In.) 2-1/4 2-1/4 2-1/4

(mm) 57,2 57,2 57,2

6-5/8 API Regular Combination Ball Type Jet and Junk Basket

29

FISHING SERVICES

Jet BushingProduct No. 130-96

JET BUSHINGProduct No. 130-96The Jet Bushing operates on the sameprinciple as the Combination Ball TypeJunk Basket. The high velocity of thefluid through the jets creates a vacuuminside the barrel of the tool which causesa reverse circulating effect. This reversecirculation action makes it possible torecover junk without cutting a core. TheJet Bushing operates by dropping a ballto divert all flow from the downward jet tothe outer jets.

The Jet Bushing has washpipe boxand pin connections making it possibleto cross-over to any washpipe size.Washpipe extensions may be addedabove or below the bushing. This flexibil-ity makes it possible to place the fingercatchers as close or as far away from theshoe as conditions dictate. Additionally,the bushing is ideal for recovering loosejunk which has fallen beside a retriev-able bridge plug or debris that may havefallen around the drillpipe hung off insubsea preventers.

When working on smaller rigs withlimited pump capacity, the jets are easilychanged to accommodate availablepump capacity.

FEATURES/BENEFITS• Bottom jet will wash away any forma-

tion that has settled while going in hole• No core required• No moving parts• Versatility of hole size and finger

catcher placement provided bywashpipe connections

• Removable junk strainer• Removable jets• Can be manufactured with any

washpipe thread

INTERNAL BOOT BASKETProduct No. 130-21The Internal Boot Basket is designed totrap debris too small to recover in astandard finger type junk catcher. Thecatcher bushing is run with a Combina-tion Ball Type Jet and Junk Basket or aJet Bushing. The catcher bushing canbe run with or without a standard junkbasket head with finger catchers.

FEATURES/BENEFITS• No moving parts• Versatility of hole size provided by

washpipe connections• Can be manufactured with any

washpipe thread

Internal Boot BasketProduct No. 130-21

30

FISHING SERVICES

“M” ™ REVERSECIRCULATING TOOLProduct No. 131-23The “M” Reverse Circulating Tool (RCT™)is a unique device used to effect reversecirculation in a downhole work area.Conventional circulation is routed fromthe inside to the outside of the tool andexits below the tool/casing annuluspackoff thus establishing flow down theannulus in the area located below thepackoff. As circulation reaches bottom,it turns and comes up the inside diameterof the tool and exits into the casing/workstring annulus above the packoff forreturn to surface. An inner Boot BasketJunk Catcher is incorporated into theRCT to catch and retain debris circulatedfrom the wellbore. The RCT allowswashover and milling operations to beconducted in a reverse circulation modecausing milled junk to be caught andretained inside the tool. The RCT hasproven to be an effective tool for use inboth vertical and directional wells.

“M” Reverse Circulating ToolProduct No. 131-23

Casing OD (In.) 7 7-5/8 8-5/8 9-5/8 (mm) 177,8 193,7 219,1 244,5

Weight (lb/ft) 23 - 38 24 - 39 28 - 44 32.3 - 53.5(kg/m) 34,2 - 56,5 35,7 - 58 41,6 - 65,4 48 - 79,5

Top Connection 3-1/2 API-IF 3-1/2 API-IF 3-1/2 API-IF 3-1/2 API-IF

Bottom Connection 5-1/2 WFJ 5-1/2 WFJ 5-1/2 WFJ 5-1/2 WFJ

Tool OD (In.) 5-9/16 5-9/16 5-9/16 5-9/16(mm) 141,3 141,3 141,3 141,3

“M” REVERSE CIRCULATING TOOLPRODUCT NO. 131-23

SPECIFICATION GUIDE

FEATURES/BENEFITS• Eliminates casing damage caused by

junk trapped between the casing andthe bottomhole assemblies

• Faster rate of penetration and longershoe life

• Eliminates damage to bottomhole as-semblies by keeping milled junk insidethe RCT

• Allows reverse circulation downholewithout having to reverse from surface

• Can be utilized below open-thief zonesor damaged casing

• Fishing, milling, and washover opera-tions can be conducted continuouslywhile reverse circulating

• It is not necessary for the hole to be full- fluid level must stand above workingdepth

31

FISHING SERVICES

WINDOWMASTER ™

Product No. 150-77The WindowMaster is the first one-tripwindow milling system. The Window-Master mill design makes it possible torun the milling and reaming assemblywith the whipstock while starting andcompleting the window to full opening,all in the same trip. The WindowMastermills utilize METAL MUNCHER® tech-nology so that the window is not onlyachieved in one run, but also results inless milling time than conventional mills.

The packer/anchor and bottom tripanchor are compatible with theWindowMaster Whipstock Systems, asdescribed on pages 34-36.

The milling assembly is sheared offwith downward force only. The millingweight should be low and constant

WindowMasterProduct No. 150-77

For information on Thru-Tubing Whipstock, see pages 100-101.For more information on Watermelon, String, and Taper Mills, see pages 20-21.

throughout the operation and millingshould continue until the entire millingassembly has passed through the win-dow. After the proper depth is reached,the milling assembly should be able topass in and out of the window with nodrag. If drag occurs continue reaminguntil the milling assembly can pass freelythrough the window.

FEATURES/BENEFITS• One BHA trip window• Milling and reaming performed

simultaneously• Trip time is less than conventional

window cutting operations• Variety of packers/anchor systems

available• Retrievable feature available• Utilizes METAL MUNCHER technology

SPECIFICATION GUIDECasing Size Casing Weight Whipstock OD Upper Watermelon Mill OD

In. lb/ft In. In.mm kg/m mm mm

5-1/2 14.00 4-1/8 4-3/4140 6,36 105 121

15.50 4-1/8 4-3/47,05 105 121

17.00 4-1/8 4-3/47,73 105 121

20.00 4-1/8 4-1/29,09 105 114

23.00 4-1/8 4-1/210,45 105 114

6-5/8 20.00 5-1/2 5.875168 9,09 140 149

7 20.00 5-1/2 6.25178 9,09 140 159

23.00 - 26.00 5-1/2 6.15110,45 - 11,81 140 156

29.00 5-1/2 6.15113,18 140 15632.00 5-1/2 5.96914,55 140 15235.00 5-1/2 5.87515,91 140 149

7-5/8 29.70 6 6.75194 13,50 152 171

33.70 6 6.62515,32 152 16839.00 6 6.517,73 152 16542.80 5-1/2 6.37519,45 140 162

45.3 - 47.1 5-1/2 6.2520,59 - 21,40 140 159

9-5/8 36.00 8 8.765244 16,36 203 223

40.00 8 8.67518,18 203 22043.50 8 8.619,77 203 21847.00 8 8.521,36 203 216

53.5 - 58.4 8 8.37524,31 - 26,54 203 213

32

FISHING SERVICES

Eastman StyleWhipstock SystemProduct No. 150-74

EASTMAN STYLE WHIPSTOCK SYSTEMProduct No. 150-74The Eastman Style Whipstock is the industry standard permanent whipstock side-track system. Hundreds of these systems have been successfully run and anchorsavailable consist of either a permanent anchor/packer system or bottom-trip anchor.

The whipstock is made of AISI 4140 material and is specifically designed for eachcasing size and weight. The whipstock is tripped into the hole with a starting mill andheld in place with a shear bolt attached to a lug pad. After the whipstock is orientedin the proper direction, the shear bolt is severed and milling procedure begins. Theinitial cut is most crucial and this is accomplished by the starting mill in the first 1-1/2to 2-1/2 feet. This assembly is then tripped out and the window/watermelon mill is runto mill and ream the rest of the window. If needed, a clean-up run can be made witha tapered mill and watermelon mill assembly.

SPECIFICATION GUIDECasing Casing Drift Whipstock Whipstock Mill

Size Size Diameter OD Packer SizeIn. mm lbs/ft mm In. mm In. mm In. mm In. mm5 127,0 18 26,8 4.151 105,4 3-7/8 98,4 4 100,8 4-1/8 104,8

15 22,3 4.283 108,8 4 101,6 4 100,8 4-1/4 108,013 19,4 4.369 111,0 4 101,6 4-1/4 108,0 4-1/4 108,0

11.5 17,1 4.435 112,6 4 101,6 4-1/4 108,0 4-3/8 111,15-1/2 139,7 23 34,3 4.545 115,4 4-1/4 108,0 4-1/3 109,9 4-1/2 114,3

20 29,8 4.653 118,2 4-1/4 108,0 4-1/3 109,9 4-5/8 117,517 25,3 4.767 121,1 4-1/2 114,3 4-1/2 114,3 4-3/4 120,7

15.5 23,1 4.825 122,6 4-1/2 114,3 4-1/2 114,3 4-3/4 120,714 20,9 4.887 124,1 4-1/2 114,3 4-1/2 114,3 4-7/8 123,8

6-5/8 168,3 32 47,7 5.55 141,0 5-1/4 133,4 5-1/2 138,9 5-1/2 139,728 41,7 5.666 143,9 5-1/4 133,4 5-1/2 138,9 5-5/8 142,924 35,7 5.796 147,2 5-1/4 133,4 5-1/2 138,9 5-3/4 146,120 29,8 5.924 150,5 5-1/2 139,7 5-1/2 138,9 5-7/8 149,2

7 177,8 38 56,6 5.795 147,2 5-1/4 133,4 5-1/2 138,9 5-3/4 146,135 52,1 5.879 149,3 5-1/2 139,7 5-1/2 138,9 5-7/8 149,232 47,7 5.969 151,6 5-1/2 139,7 5-2/3 144,5 5-7/8 149,229 43,2 6.059 153,9 5-1/2 139,7 5-2/3 144,5 6 152,426 38,7 6.151 156,2 5-1/2 139,7 5-2/3 144,5 6-1/8 155,623 34,3 6.241 158,5 5-1/2 139,7 5-2/3 144,5 6-1/8 155,620 29,8 6.331 160,8 5-1/2 139,7 6-1/5 157,2 6-1/4 158,817 25,3 6.413 162,9 5-1/2 139,7 6-1/5 157,2 6-3/8 161,9

7-5/8 193,7 39 58,1 6.5 165,1 6 152,4 6-3/8 161,9 6-1/2 165,133.7 50,2 6.64 168,7 6 152,4 6-3/8 161,9 6-5/8 168,329.7 44,2 6.75 171,5 6-1/4 158,8 6-3/8 161,9 6-3/4 171,526.4 39,3 6.844 173,8 6-1/4 158,8 6-3/8 161,9 6-3/4 171,524 35,7 6.9 175,3 6-1/4 158,8 6-3/8 161,9 6-7/8 174,6

8-5/8 219,1 49 73,0 7.386 187,6 7 177,8 7-1/8 181,0 7-3/8 187,344 65,5 7.5 190,5 7 177,8 7-1/8 181,0 7-1/2 190,540 59,6 7.6 193,0 7 177,8 7-1/8 181,0 7-1/2 190,536 53,6 7.7 195,6 7 177,8 7-1/8 181,0 7-5/8 193,732 47,7 7.796 198,0 7 177,8 7-1/2 190,5 7-3/4 196,928 41,7 7.892 200,5 7 177,8 7-1/2 190,5 7-7/8 200,024 35,7 7.972 202,5 7 177,8 7-1/2 190,5 7-7/8 200,0

9-5/8 244,5 53.5 79,7 8.379 212,8 8 203,2 8-1/8 206,4 8-3/8 212,747 70,0 8.525 216,5 8 203,2 8-1/8 206,4 8-1/2 215,9

43.5 64,8 8.599 218,4 8 203,2 8-1/8 206,4 8-1/2 215,940 59,6 8.679 220,4 8 203,2 8-1/8 206,4 8-5/8 219,136 53,3 8.765 222,6 8 203,2 8-1/8 206,4 8-3/4 222,3

32.3 48,1 8.845 224,7 8 203,2 8-1/8 206,4 8-3/4 222,310-3/4 273,1 55.5 82,7 9.604 243,9 9 228,6 9-4/9 239,7 9-1/2 241,3

51 76,0 6.694 170,0 9 228,6 9-4/9 239,7 9-5/8 244,545 5 67,8 9.794 248,8 9 228,6 9-4/9 239,7 9-3/4 247,740.5 60,3 9.894 251,3 9 228,6 9-4/9 239,7 9-3/4 247,7

32.75 48,8 10.036 254,9 9 228,6 9-4/9 239,7 9-7/8 250,811-3/4 298,5 60 89,4 10.616 269,6 10 254,0 10-4/9 265,1 10-1/2 266,7

54 80,4 10.724 272,4 10 254,0 10-4/9 265,1 10-5/8 269,947 70,0 10.844 275,4 10 254,0 10-4/9 265,1 10-3/4 273,142 62,6 10.928 277,6 10 254,0 10-4/9 265,1 10-3/4 273,1

13-3/8 339,7 72 107,2 12.191 309,7 11-1/2 292,1 12 304,8 12-1/8 308,068 101,3 12.259 311,4 11-1/2 292,1 12 304,8 12-1/8 308,061 90,9 12.359 313,9 11-1/2 292,1 12 304,8 12-1/4 311,2

54.5 81,2 12.459 316,5 11-1/2 292,1 12 304,8 12-1/4 311,248 71,5 12.559 319,0 11-1/2 292,1 12 304,8 12-3/8 314,3

33

FISHING SERVICES

CEMENTED WHIPSTOCKSYSTEMProduct No. 150-68The Cemented Whipstock is used inapplications where the casing integrity isin question, or in low-cost environmentoperations.

The Cemented Whipstock Systemconsists of a whipstock with a circulatingport through the length of the whipstock,a perforated tube or casing below thewhipstock, and a running tool. The whip-stock is run in the hole with the runningtool and set on a cement plug, bridgeplug, or false bottom and can also beoriented. Cement is pumped throughthe running tool, through the whipstock,and through the perforated tube back uparound the whipstock. A shear bolt issevered, separating the whipstock fromthe running tool, and cement is broughtup to a predetermined height above thetop of the whipstock. Cement can be

Cemented WhipstockProduct No. 150-68

reverse circulated at that point.After the cement hardens, the mill-

out assembly is run to mill out throughthe casing. The cement supports thewindow mill so the mill is forced by thewhipstock into the casing wall and an exitis performed. An optional clean-out as-sembly can then be run after milling outinto formation.

FEATURES/BENEFITS• Low cost system if rig time is not a

concern• Ideal application if casing integrity is

poor or suspect• Conventionally orientated• Cement secures whipstock into

casing• Cement forms an internal casing

pressure seal from lower production

For information on Thru-Tubing Whipstock, see pages 100-101.For more information on Watermelon, String, and Taper Mills, see pages 20-21.

SPECIFICATION GUIDE

Casing Whipstock Window

Size Weight OD Perforated Extension Size

In. lb/ft In. In. In.mm kg/m mm mm mm

5 11.5 - 18 4 3-1/2 3-3/4 - 4-3/8127 17,1 - 26,8 102 89 95 - 111

18 - 24.2 3-3/4 3-1/2 3-3/4 - 4-1/826,8 - 36,1 95 89 95 - 105

5-1/2 14 - 20 4-1/2 4 4-5/8 - 4-7/8140 20,9 - 29,8 114 102 117 - 124

23 - 29.7 4 3-1/2 4-1/4 - 4-1/234,3 - 44,3 102 89 108 - 114

6-5/8 17 - 24 5-1/2 4-1/2 5-3/4168 25,3 - 35,8 139 114 146

6 28 - 36.7 5-1/4 4-1/2 5-3/8 - 5-5/8152 41,7 - 54,7 133 114 137 - 143

7 20 - 38 5-5/8 5 5-3/4 - 6-1/4178 29,8 - 56,7 143 127 146 - 159

9-5/8 29.3 - 40 8-3/8 7 8-5/8 - 8-7/8244 43,7 - 59,6 213 178 219 - 225

43.5 - 53.5 8 7 8-1/2 - 8-3/864,9 - 79,8 203 178 216 - 211

34

FISHING SERVICES

TORQUEMASTER ™

WHIPSTOCK PACKERProduct No. 415-18The TorqueMaster Packer and anchorsystem is to permanently orient and an-chor a whipstock in a cased wellbore forsidetrack operations. The TorqueMasteroperates the same as Baker’s traditionalwhipstock packers, but has some perfor-mance enhancements. These enhance-ments include an increased pressurerating, torque rating, weldless construc-tion, and shorter design to decreasewhipstock deflections. TheTorqueMaster system offers improvedperformance over “DW-1”™ whipstockpackers, and “W-2”™ whipstock anchors.The TorqueMaster is not intended toreplace the “ML”™ whipstock packer andanchor where production from below thepacker is expected after sidetrack op-erations.

The size designation on the newTorqueMaster packer includes twonumbers. The first number indicatesthe OD, and the second number de-notes the ID. For example, a 588-32 isa 5.88" (149,4 mm) OD with a sealbore ID of 3.25" (32,6 mm).

FEATURES/BENEFITS• Short compact design minimizes

whipstock deflection• Orientation is adjustable within 1.5°

accuracy• Patent pending “cam cone” design

withstands up to 20,000 ft-lbs.(27,093N-m) of torque

• Unique wicker pattern on slips to resisttorque and axial loads

• No welded components• Orientation key not located in a

pressure containing member• System is compatible with other

whipstock manufacturers• Enhanced orientation key• Packer can function as a bridge plug• Packer orientation key and anchor’s

muleshoe have maximum contact areafor bearing strength

• 7500 psi (51,7 MPa) plugged pressurerating

• 70 to 300°F (21 to 149°C) temperaturerating

• Drillpipe connections standard onanchor

• Shuttle piston compensates for fluiddisplacement when stabbing anchorinto a closed system

TorqueMaster Whipstock PackerProduct No. 415-18

(A) Sizes under developement.

SPECIFICATION GUIDECasing *New RPP Packer Packer Range Packer

Size Weight Size Size Gauge OD Min ID Max ID Seal BoreIn. mm lbs/ft kg/m In. mm In. mm In. mm In. mm

5.500 140 23.00 34,30 433-19 (A) 42-26 D 4.328 110 4.578 116,28 4.868 123,6420.00 29,8217.00 25,35 1.968 50

5.500 140 15.50 23,11 450-19 (A) 44-26 D 4.500 114 4.819 122 5.090 12914.00 20,87

7.000 178 38.00 56,676.625 168 24.00 35,79 569-26 (A) 83-40 F 5.687 144 5.801 147 6.123 1567.000 178 35.00 52,207.000 178 32.00 47,72 588-26 (A) 85-40 F 5.875 149 5.990 152 6.293 160

29.00 43,247.000 178 26.00 38,77

23.00 34,30 600-26 (A) 87-40 F 6.000 152 6.187 157 6.750 1717.625 194 42.80 63,837.000 178 20.00 29,827.625 194 42.80 63,83 2.688 687.000 178 20.00 29,82 625-26 (A) 89-40 F 6.250 159 6.376 162 6.750 1717.750 197 46.10 68,757.000 178 17.00 25,357.625 194 39.00 58,16

33.70 50,257.625 194 29.70 44,29 650-26 (A) 91-40 F 6.500 165 6.662 169 7.129 181

26.40 39,3724.00 35,7953.50 79,7847.00 70,09

9.625 245 43.50 64,87 813-26 194-47 D 8.125 206 8.405 213 9.050 23040.00 59,6536.60 54,5840.50 60,40

10.750 273 45.50 67,85 944-26 (A) 214-47 D 9.437 240 9.604 244 10.190 25951.00 76,0555.50 82,77

35

FISHING SERVICES

WHIPSTOCK ONE TRIPHYDRAULIC SET PACKER(ANNULAR SET)Product No. 415-18The Whipstock One Trip HydraulicPacker has been designed to be run inhole with the WindowMaster system.Once at depth the whipstock is oriented,the packer is set, and the window is cut.Thus a true one trip whipstock system isavailable.

The packer is annular pressure sen-sitive and is set by increasing annuluspressure to a predetermined value.When set, the packer is anchored androtationally locked to the casing by meansof a field proven slip mechanism.

The Whipstock One Trip HydraulicPacker may be used only in wells withpressure integrity of casing intact.

FEATURES/BENEFITS• Patented slip profile provides positive

resistance to rotation of the packerwithin the casing. The 9-5/8" casingpacker has been torqued to 20,000 ft-lbs (27200 Nm) without failure.

• Provides proven sealing reliability of a

Model “D” Packing Element System.• Packer is plugged when set and acts

as a barrier to pressure below. The9-5/8" packer has been tested to 5000psi (344,82 bar) above and below theelement.

• The WindowMaster Whipstock can beretrieved from the set packer. Alongwith the WindowMaster Whipstock, thepacker top sub and setting sleevemechanism is retrieved leaving a shortnon-rotating packer in hole if milling ofpacker is required.

• If the WindowMaster Whipstock has tobe retrieved, the packer bore can bespeared with a packer retrieving toolif washing over the packer slips is thepreferred method of retrieval.

• The 9-5/8" packer has a 500,000 lbs(227272 kg) set down and 180,000 lbs(81818 kg) (disconnect shear ring)tensile rating.

• Does not require bottom or bridge plugfor setting.

Whipstock One TripHydraulic Set Packer (Annular Set)

Product No. 415-18

Setting Depth (T.V.D) 5000 - 9000 ft / 1524 - 2743 m 9000 - 13000 ft / 2743 - 3962 m

Commodity Number 415-18-1902 415-18-1903

Casing Weight 40 - 53.5 lbs/ft / 53,65 - 79,78 kg/m 40 - 53.5 lbs/ft / 53,65 - 79,78 kg/m

Rated Pressure (Above) 5000 psi / 345 bar 5000 psi / 345 bar

Rated Pressure (Below) 7500 psi / 517 bar 7500 psi / 517 bar

Torque Rating 20,000 ft-lbs / 27,000 Nm 20,000 ft-lbs / 27,000 Nm

9-5/8" PACKERSPECIFICATION GUIDE

Setting Depth (T.V.D) 2000 - 6000 ft / 610 - 1829 m

Casing Weight 23 - 26 lbs/ft / 39,83 - 38,78 kg/m

Rated Pressure (Above) 5000 psi / 345 bar

Rated Pressure (Below) 5000 psi / 345 bar

Torque Rating 10,000 ft-lbs / 13,500 Nm

7" PACKERSPECIFICATION GUIDE

36

FISHING SERVICES

Bottom Trip AnchorProduct No. 150-55

BOTTOM TRIP ANCHORProduct No. 150-55The Bottom Trip Anchor is a low costalternative to the packer/anchor assem-bly. The mechanically-set anchor is en-ergized on a bridge plug, cement plug, orother false bottom. The slip design,consisting of vertically or horizontallywickered slips, provides a 360° grippingarea on a torsionally locked body. TheBottom Trip Anchor’s modular designallows use with most whipstock sys-tems. Bottom Trip Anchors are availablefor permanent or retrievable whipstocks.

SPECIFICATION GUIDE

FEATURES/BENEFITS• Low cost• Proven design• Retrievable design allows for slip re-

traction which prevents scaring cas-ing during the retrieving process

• Does not require circulation to acti-vate, may be used with MWD

• Extensions may be added to plungeradjusting depth of window in relationto obstruction or restriction

• Slip design eliminates risk of rotation

Casing Size Casing Weight Anchor OD

In. lb/ft In. Assembly Numbermm kg/m mm

5-1/2 14.00 - 15.50 4.693 150-55-5503140 6,36 - 7,04 119

5-1/2 17.00 - 20.00 4.475 150-55-5504140 7,72 - 9,09 114

7 23.00 - 29.00 5.906 150-55-7003178 10,45 - 13,18 150

7 32.00 - 38.00 5.784 150-55-7004178 14,54 - 17,27 147

7-5/8 29.70 - 33.70 6.510 150-55-7601194 13,50 - 15,31 165

7-5/8 42.80 - 47.10 6.190 150-55-7602194 19,45 - 21,41 157

9-5/8 32.30 - 36.00 8.625 150-55-9603244 14,68 - 16,36 219

9-5/8 40.00 - 53.50 8.419 150-55-9602244 18,18 - 24,32 214

37

FISHING SERVICES

ROLLING DOG WHIPSTOCK RETRIEVING OVERSHOTPRODUCT NO. 150-64

SPECIFICATION GUIDE

Casing Size Casing Weight Tool OD Connection

In. mm lb/ft kg/m In. mm5-1/2 139,7 14 - 20 20,87 - 29,82 4.125 104,8 2-7/8 API IF

7 177,8 20 - 38 29,82 - 56,67 5.25 133,4 3-1/2 API IF

7-5/8 193,7 26.4 - 47.1 39,37 - 70,24 5.25 133,4 3-1/2 API IF

9-5/8 244,5 40 - 58.4 59,65 - 87,09 6.375 161,9 4-1/2 API IF

LUG TYPE RETRIEVING TOOLPRODUCT NO. 150-64

SPECIFICATION GUIDE

ROLLING DOG WHIPSTOCKRETRIEVING OVERSHOTProduct No. 150-64The Rolling Dog Whipstock RetrievingOvershot is designed to be the secondline of attack when retrieving a whip-stock. The tool engages when it haspassed over the whipstock then pickedup. The bottom of the tool has a cutlipdesign so that the whipstock can bepulled off the wall into the overshot. If thewhipstock cannot be pulled, the overshotmay be released by using pump pres-sure to retract the dog.

FEATURES/BENEFITS• Cutlip design eliminates need to

orientate tool downhole• Hydraulically releasable• Latches anywhere on the whipstock

Lug Type Retrieving ToolProduct No. 150-64

Rolling Dog WhipstockRetrieving OvershotProduct No. 150-64

LUG TYPE RETRIEVING TOOLProduct No. 150-64The Lug Type Retrieving Tool is de-signed to be the first line of attack inretrieval of a WindowMaster Whipstock.The Lug Type Retrieving Tool is de-signed to latch into the retrieval slot cut inthe face of the whipstock. The tool isdesigned with wash ports so that theretrieval slot may be jetted out prior toattempting to engage. When properlyoriented, the tool engages the whipstockwith straight pick up. A MWD or wirelineorientation sub should be run in case theproper orientation cannot be found. If thewhipstock cannot be pulled, the tool iseasily released using pump pressure toretract the lug.

FEATURES/BENEFITS• Hydraulically releasable• Jetted for cleaning of retrieval window

Casing Size Casing Weight Tool OD Connection

In. mm lb/ft kg/m In. mm5-1/2 140 14 - 17 20,87 - 25,35 4.75 120,7 2-7/8 API IF

7 178 23 - 29 34,30 - 43,24 6 152,4 3-1/2 API IF

7 194 32 - 38 47,72 - 56,67 5.75 146,1 3-1/2 API IF

7-5/8 244 26.4 - 39 39,37 - 58,16 6.5 165,1 3-1/2 API IF

7-5/8 194 42.8 - 47.1 63,83 - 70,24 6.25 158,8 3-1/2 API IF

9-5/8 244 36 - 43.5 53,68 - 64,87 8.6 218,4 4-1/2 API IF

9-5/8 244 47 - 53.5 70,09 - 79,78 8.125 206,4 4-1/2 API IF

38

FISHING SERVICES

“ML” ™ WHIPSTOCKPACKER AND “ML” ™

ORIENTATION ANCHORProduct Nos. 783-62 & 783-58The “ML” Whipstock is designed to pro-vide a premium permanent sealing da-tum point for the “ML” Anchor. By usingthe “ML” Packer and Anchor many of theproblems associated with orientation ofbent liner joints and scoophead diverterscan be reduced.

The “ML” Packer may be set onwireline or pipe with standard Baker set-ting tools. For applications where orien-tation is extremely critical, a gyro surveyshould be run to determine orientation ofkey with the hole geometry. Once theorientation is know, the “ML” Anchor canbe easily adjusted while hanging belowthe whipstock, guidestock or diverter.The “ML” Anchor incorporates a simpleguide track that aligns with the torque lugin the packer.

Retrieval of the “ML” Anchor is ac-complished by straight pull to the amountof tension defined by the shear ring.

FEATURES/BENEFITS• Utilizes standard setting tools• Provides high torque permanent

datum• Maximum ID for high production rates• Proven orientation and anchoring

system• Same anchor used for whipstock,

drilling and production• Orientation is fully adjustable on

location

Casing New RPP Packer Packer Range Packer

Size Weight Size Size Gauge OD Min ID Max ID Seal Bore

In. mm lbs/ft kg/m In. mm In. mm In. mm In. mm

7.000 178 38.00 56,67

6.625 168 24.00 35,79 569-47 x 388 83-40 F 5.687 144,4 5.801 147,3 6.123 155,5

7.000 178 35.00 52,19

7.000 178 32.00 47,72 588-47 x 388 85-40 F 5.875 149 5.990 152,1 6.293 159,8

29.00 43,24

7.000 178 26.00 38,77

23.00 34,30 600-47 x 388 87-40 F 6.000 155 6.187 157 6.750 171

7.625 194 42.80 63,83

7.000 178 20.00 29,82

7.625 194 42.80 63,83 4.750 121

7.000 178 20.00 29,82 625-47 x 388 89-40 F 6.250 159 6.376 162 6.750 171

7.750 197 46.10 63,83

7.000 178 17.00 25,35

7.625 194 39.00 58,16

33.70 50,25

7.625 194 29.70 44,29 650-47 x 388 91-40 F 6.500 165 6.662 169 7.129 181

26.40 39,37

24.00 35,79

53.50 79,78

47.00 70,09

9.625 244 43.50 64,87 813-47 x 388 194-47 D 8.125 206 8.405 213 9.050 230

40.00 59,65

36.60 54,59

SPECIFICATION GUIDE

“ML” Whipstock PackerProduct No. 783-62

39

FISHING SERVICES

SPECIFICATION GUIDE

OD of Tool (In.) 4-1/2 5-1/2 6-1/4 7-1/4 8-1/4 9-1/4 9-3/4 11-1/2(mm) 114,3 139,7 158,8 184,2 209,6 235 247,7 292,1

Top Connection 2-7/8 3-1/2 3-1/2 4-1/2 4-1/2 6-5/8 6-5/8 6-5/8API Reg API Reg API Reg API Reg API Reg API Reg API Reg API Reg

Casing Size (In.) 5-1/2 7 7-5/8 8-5/8 9-5/8 10-3/4 11-3/4 13-3/8(mm) 139,7 177,8 193,7 219,1 244,5 273,1 298,5 39,7

After milling for three to five feet,rotation continues and the pump isstopped while picking up off the casing.Pressure is allowed to equalize and rota-tion is stopped while picking up into thecasing above the cut point. Pressure isthen resumed and slacked off into thewindow. The resulting pressure dropverifies cut-out and removes any shav-ing which may have entered the toolwhile making the window cut-out. Millingoperations are continued.

If torque increases above normal, thepumps may be stopped and the toolpulled into the window to removecuttings.

FEATURES/BENEFITS• Operates hydraulically for fast efficient

downhole milling• Knife design reduces long stringers

and removes casing in short chips foreasy lift and removal by thedrilling fluid

• All six knives are used for the initialcut-out, reducing cut-out time and mini-mizing the chance of bent or brokenknives

• Knives are dressed with tungsten car-bide inserts utilizing METALMUNCHER technology for faster mill-ing and increased downhole life

• Body tool parts constructed from AISI4140 heat-treated alloy steel

TRI-STATE™ MODEL “D” ™

SECTION MILLProduct No. 150-72The TRI-STATE Model “D” Section Millis an inside cutter and section mill de-signed for side-tracking operations aswell as for milling perforated casing inproduction zones, loose joints of surfacepipe, and old casing for cementing newsmaller casing to the formation.

The “D” Section Mill should be runwith a minimum of 10,000 lbs (4545 kg)of string weight available in thebottomhole assembly and with a bit ormill below the tool to help enter the holeand stir cuttings during milling operation.The cut is started slowly, approximatelytwo to five feet above a coupling, thenbrought to a speed of 80+ RPMs for thecut-out. The pump is started and thenumber of strokes increased to give aminimum pressure drop of 400 psi (27,58bar) across the mandrel nozzle. Duringcut-out, approximately 1" is slacked off in1/16" increments over a period of five toten minutes. Once the pump gaugeshows a definite pressure drop of 200 psi(13,79 bar), indicating that the casinghas been cut through, pressure is in-creased until the annular velocity is suf-ficient to bring cuttings out of the hole.RPMs and weight on mill may be ad-justed to obtain optimum mill perfor-mance.

“D” SectionProduct No. 150-72

40

FISHING SERVICES

LockomaticExpanding Hole Opener

Product No. 150-79

LOCKOMATIC SECTION MILLPRODUCT NO. 150-95

SPECIFICATION GUIDE

OD of Tool (In.) 3-11/16 4-1/4 4-3/4 5-9/16 6 7-1/2 9-1/2 12 14-1/2(mm) 93,7 108,0 120,7 141,3 152,4 190,5 241,3 304,8 368,3

Top Connection 2-3/8 2-3/8 2-3/8 3-1/2 3-1/2 4-1/2 5-1/2 6-5/8 6-5/8API Reg API Reg API Reg API Reg API Reg API Reg API Reg API Reg API Reg

Casing Size (In.) 4-1/2 - 5 5 - 5-1/2 5-1/2 - 6 6-5/8 - 7 7 - 7-5/8 8-5/8 - 9-5/8 10-3/4 - 11-3/4 13-3/8 - 16 18-5/8 - 20(mm) 114,3 - 127 127 - 139,7 139,7 - 152,4 168,3 - 177,8 177,8 - 193,7 219,1 - 244,5 273 - 298,5 339,7 - 406,4 473,1 - 508

Max Blade (In.) 5.46 - 5.75 6.18 - 6.54 6.43 - 7.03 8.27 8.40 - 9.25 10.37 - 11.37 12.5 - 13.5 15.12 - 17.75 19.75 - 21.75Expansion (mm) 138,7 - 146 157 - 166,3 163,5 - 178,6 210,2 213,5 - 234,9 263,5 - 288,9 317,5 - 342,9 384,2 - 450,8 501,6 - 552,5

LockomaticSection Mill

Product No. 150-95

LOCKOMATIC EXPANDING HOLEOPENER AND SECTION MILLProduct No. 150-79 (Underreamer)Product No. 150-95 (Section Mill)The Lockomatic is a positive direct locking expandinghole opener. The locking mechanism is tied directly tothe drillstring, allowing the driller complete control. Thepostive locking also assures the underreamed sectionwill be full gauge. These same features make theLockomatic an excellent section mill.

The Lockomatic is run with a standard drilling BHA.The positive locking allows the tool to be run in the holelike a drill bit. Once the hole section to be underreamedis reached the tool is activated hydraulically. Once thetool reaches full open gauge, expansion can be checkedby shutting down the pumps. When the Lockomatic isfully opened, it will take drilling weight. The mainfuction of the circulation from this point will be holecleaning.

Straight pickup without the pumps will close thetool. If the tool takes weight at the casing shoe, it maybe necessary to slack off and rotate at 100+ RPMwithout the pumps to sling off any cuttings trappedunder the arms.

The Lockomatic may be dressed with any type ofRoller Cone, PDC, Diamond Cutters or METALMUNCHER Section Mill Knives.

FEATURES/BENEFITS• Fast run-ins• Assured gauge hole• Can be supplied with any type bit cone• Available with PCD cutter arms• Rugged design• Knife design reduces stringers by removing casing

as small chips

41

FISHING SERVICES

LOCKOMATIC EXPANDING HOLE OPENERPRODUCT NO. 150-79

SPECIFICATION GUIDE

Tooth Type Formation Cutters

Tool Less Cutters Cutters

API Reg API Reg Max Tool Tool (Only) Closed Expanded Cutter EquivalentSize Model Pin Up Box Down OD Product No. Gauge Gauge Arm Code Bit Size RPM Part No.

In. / mm In. / mm In. mm In. mm

5-5/8 143 2SA5-5/8 3-3/4 95 25 - 652 KSA 2-3/8 3-11/16 15079100 3-3/4 6 152 2SA6 (I.A.D.C.) 03-04402-00

KSB 94 15079200 95 6-3/4 171 2SB6-3/4 (221) 20 - 557-1/2 191 2SB7-1/2

6 152 4SA6 4-3/4 121 32 - 794 KSA 2-3/8 4-3/4 15081100 4-3/4 6-3/4 171 4SA6-3/4 (I.A.D.C.) 28 - 70

121 121 7-3/4 197 4SA7-3/4 (211) 25 - 61 03-04404-008-1/2 216 4SA8-1/2 22 - 567-5/8 194 5SA7-5/8 5-5/8 143 30 - 74

5 KSA 3-1/2 5-9/16 15082100 5-9/16 8 203 5SA8 (I.A.D.C.) 28 - 70141 141 9 229 5SA9 (221) 25 - 63 03-04405-00

9-3/4 248 5SA9-3/4 23 - 58KSB 15082200 11 279 5SB11 21 - 51

7-5/8 194 6SA7-5/8 31 - 798-1/2 216 6SA8-1/2 6 152 28 - 71

KSA 15083100 9 229 6SA9 (I.A.D.C.) 27 - 676 3-1/2 6 6 9-1/2 241 6SA9-1/2 (211) 25 - 63 03-04406-00

152 152 9-7/8 251 6SA9-7/8 24 - 6110-5/8 270 6SB10-5/8 23 - 56

KSB 15083200 11 279 6SB11 22 - 5512 305 69SB12 20 - 50

8-1/2 216 7SA8-1/2 35 - 889 229 7SA9 33 - 83

9-1/2 241 7SA9-1/2 7-1/2 191 32 - 797 KSA 4-1/2 7-1/2 15084100 7-1/2 9-7/8 251 7SA9-7/8 (I.A.D.C.) 30 - 76 03-04407-00

191 191 11 279 7SA11 (211) 27 - 6812-1/4 311 7SA12-1/4 24 - 61

13 330 7SA13 23 - 58KSB 15084200 14 356 7SB14 21 - 54

15 381 7SB15 20 - 5012-1/4 311 9SA12-1/4 9 229 29 - 73

KSA 15086100 14 356 9SA14 (I.A.D.C.) 26 - 6415 381 9SA15 (211) 24 - 60

9-1/2 16 406 9SA16 23 - 56241 18 457 9SB18 20 - 50

9 KSB 5-1/2 6-5/8 9-1/2 15086200 19 483 9SB19 19 - 47 03-04409-00241 10-1/2 18 457 9SB10-1/2 x 18 20 - 50

21 533 9SB10-1/2 x 21 17 - 4312-1/4 311 9WA12-1/4 7-1/2 191 24 - 61

KWA 15086300 9-1/2 13-1/2 343 9WA 13-1/2 (I.A.D.C.) 22 - 56241 15 381 9WA15 (211) 20 - 50

16 406 9WA16 19 - 4715 381 10SA15 12-1/4 311 33 - 8216 406 10SA16 (I.A.D.C.) 31 - 77

12-1/4 17-1/2 445 10SA17 1/2 (221) 28 - 70 03-04410-00311 18 457 10SA18 27 - 68

KSA 15087100 18-5/8 473 10SA18 5/8 26 - 6622 559 10SA15-1/2 x 22 22 - 56

15-1/2 24 610 10S15-1/2 x 24 20 - 5126 660 10SA15-1/2 x 26 19 - 47

10 6-5/8 6-5/8 12 15 381 10WA15 9 229 24 - 60305 12-1/4 17-1/2 445 10WA17-1/2 (I.A.D.C.) 21 - 51

18 457 10WA18 (221) 19 - 48LWA 15087500 14-3/4 375 10WA14-3/4 10-5/8 270 35 - 71

14-3/4 18-1/2 470 18-1/2 (I.A.D.C.)375 14-3/4 375 10WA 14-3/4 (111) 29 - 58

22 559 2218-1/2 470 11WA18 1/2 26 - 66

LWA 6-5/8 6-5/8 15088500 14-3/4 20 508 11WA20 25 - 61 03-04642-00375 22 559 11WA22 12-1/4 311 22 - 56

11 7-5/8 7-5/8 14-1/2 15088510 15-1/2 x 26 394 x 660 11WA15-1/2 x 26 (I.A.D.C.) 19 - 47368 15-1/2 15-1/2 x 24 394 x 610 11WB15-1/2 x 24 (211) 20 - 51

LWB 6-5/8 7-5/8 15088605 394 15-1/2 x 26 394 x 660 11WB15-1/2 x 26 19 - 47 03-04792-0015-1/2 x 28 394 x 711 11WB15-1/2 x 28 13-3/4 349 18 - 46

12 KWB 7-5/8 7-5/8 18 15089400 18-1/2 28 711 12WB28 (I.A.D.C.) 39 - 133 03-04411-00457 470 (111)

* Table RPM is based on bit manufacture recommendations — reduced in proportion to the diameter increase from equivalent bit size to expanded gauge. Higher RPM can be used, but will result in a corresponding reduction in bearing life.

42

FISHING SERVICES

WASHPIPE DATAPRODUCT NO. 156-60

SPECIFICATION GUIDEConnec- OD Gage Weight Inside Wall Upset Drift Make Up Torque Joint Tensile Joint Washover

tion No. Plain End Diameter Thickness Diameter Diameter Effici- SizeRec. Max. Yield Strength ency Rec. Max

(In.) (mm) (lbs/ft) (kg/m) (In.) (mm) (In.) (mm) (In.) (mm) (In.) (mm) (ft/lb) (N/m) (ft/lb) (N/m) (lbs) (kg) % (In.) (mm) (In.) (mm)TSWP 3-3/8 85,73 318 10.02 14,89 2.764 70,21 0.305 7,75 2.639 67,03 1,000 741 4,000 2963 111,500 50510 47 2-1/2 63,5 2-5/8 66,68TSWP 3-1/2 88,9 127 12.31 18,3 2.764 70,21 0.368 9,35 2.639 67,03 1,100 815 4,500 3333 160,000 72480 54 2-1/2 63,5 2-5/8 66,68TSWP 3-1/2 88,9 422 8.81 13,09 2.992 76 0.254 6,45 2.867 72,82 850 630 3,400 2519 97,400 44122 47 2.69 68,26 2-7/8 73,03TSWP 3-5/8 92,08 674 7.06 10,49 3.24 82,3 0.192 4,88 3.115 79,12 630 467 2,550 1889 74,000 33522 45 3.00 76,2 3-1/8 79,38TSWP 3-3/4 95,25 675 9.55 14,19 3.238 82,25 0.256 6,5 3.113 79,07 980 726 3,950 2926 108,700 49241 45 3.00 76,2 3-1/8 79,38TSWP 3-3/4 95,25 196 10.46 15,55 3.185 80,9 0.283 7,19 3.06 77,72 1,115 826 4,470 3311 123,100 55764 50 3.00 76,2 3-1/8 79,38TSWP 3-13/16 96,84 75 11.7 17,39 3.187 80,95 0.313 7,95 3.062 77,77 1,225 907 5,050 3741 138,500 62741 50 3.00 76,2 3-1/8 79,38TSWP° 4 101,6 58 12.93 19,22 3.34 84,84 0.33 8,38 3.215 81,66 1,370 1015 5,600 4148 153,670 69613 51 3-1/16 77,79 3-1/4 82,55TSWP 4-3/8 111,13 91 12.02 17,87 3.826 97,18 0.275 6,99 3.701 94,01 1,400 1037 5,600 4148 134,000 60702 47 3-1/2 88,9 3-3/4 95,25TSWP 4-3/8 111,13 91 13.58 20,18 3.749 95,22 0.313 7,95 3.624 92,05 1,660 1230 6,650 4926 158,700 71891 50 3-1/2 88,9 3-5/8 92,08TSS 4-1/2 114,3 117 11.35 16,87 4 101,6 0.25 6,35 3.875 98,43 1,200 889 4,800 3556 99,250 44960 37 3-3/4 95,25 3-7/8 98,43

TSWP° 4-1/2 114,3 148 13.04 19,38 3.92 99,57 0.29 7,37 3.795 96,39 1,460 1081 5,860 4341 160,800 72842 52 3-5/8 92,08 3-3/4 95,25TSWP° 4-1/2 114,3 59 14.98 22,26 3.826 97,18 0.337 8,56 3.701 94,01 1,800 1333 7,220 5348 181,200 82084 51 3-1/2 88,9 3-11/16 93,66TSSÆ 4-3/4 120,65 92 17.52 26,04 4 101,6 0.375 9,53 3.875 98,43 2,390 1770 9,590 7104 181,400 82174 44 3-3/4 95,25 3-7/8 98,43TSWP 4-7/8 123,83 105 11.57 17,2 4.408 112 0.233 5,92 4.283 108,8 1,380 1022 5,540 4104 134,600 60974 49 4.00 101,6 4-1/8 104,8TSWP 5 127 50 14.87 22,1 4.408 112 0.296 7,52 4.283 108,8 1,870 1385 7,500 5556 178,900 81042 51 4.00 101,6 4-1/8 104,8TSWP° 5 127 57 14.87 22,1 4.408 112 0.296 7,52 4.283 108,8 1,870 1385 7,500 5556 184,600 83624 53 4.00 101,6 4-1/8 104,8X-LINE 5 127 73 15 22,29 4.375 111,1 0.296 7,52 5.36 136,1 4.283 108,8 2,700 2000 9,550 7074 282,640 128036 80 4.00 101,6 4-1/4 108X-LINE 5 127 73 18 26,75 4.25 108 0.362 9,19 5.36 136,1 4.151 105,4 2,700 2000 9,550 7074 350,400 158731 83 4.00 101,6 4-1/8 104,8TSWP° 5 127 158 17.93 26,65 4.276 108,6 0.362 9,19 4.151 105,4 2,460 1822 9,850 7296 218,500 98981 52 4.00 101,6 4-1/8 104,8TSSÆ 5-3/8 136,53 53 20.02 29,76 4.625 117,5 0.375 9,53 4.5 114,3 2,900 2148 11,600 8593 222,800 100928 47 4-1/4 107,95 4-1/2 114,3TSWP° 5-1/2 139,7 56 16.87 25,07 4.892 124,3 0.304 7,72 4.767 121,1 2,370 1756 9,480 7022 209,700 94994 52 4-5/8 117,48 4-3/4 120,7X-LINE 5-1/2 139,7 74 17 25,27 4.875 123,8 0.304 7,72 5.86 148,8 4.767 121,1 2,700 2000 11,800 8741 316,640 143438 80 4-5/8 117,48 4-3/4 120,7TSWP 5-1/2 139,7 164 19.81 29,44 4.778 121,4 0.361 9,17 4.653 118,2 2,970 2200 11,900 8815 237,200 107452 51 4-1/2 114,3 4-5/8 117,5TSWP° 5-3/4 146,05 133 18.18 27,02 5.124 130,2 0.313 7,95 4.999 127 2,700 2000 10,800 8000 222,800 100928 52 4-7/8 123,83 5 127TSSÆ 5-3/4 146,05 77 21.53 32 5 127 0.375 9,53 4.875 123,8 3,400 2519 13,580 10059 246,500 111665 49 4-3/4 120,65 4-7/8 123,8TSSÆ 6 152,4 78 15.35 22,81 5.5 139,7 0.25 6,35 5.375 136,5 2,500 1852 10,000 7407 147,450 66795 41 5-1/4 133,35 5-3/8 136,5TSWP° 6 152,4 428 19.64 29,19 5.352 135,9 0.324 8,23 5.227 132.8 3,170 2348 12,700 9407 238,800 108176 52 5-1/8 130,18 5-1/4 133,4TSWP° 6 152,4 79 22.81 33,9 5.24 133,1 0.38 9,65 5.115 129,9 3,870 2867 15,500 11481 276,300 125164 49 5.00 127 5-1/8 130,2TSWP° 6-3/8 161,93 129 24.03 35,72 5.625 142,9 0.375 9,53 5.5 139,7 4,250 3148 17,000 12593 288,300 130600 51 5-3/8 136,53 5-1/2 139,7TSWP 6-5/8 168,28 93 23.58 35,05 5.921 150,4 0.352 8,94 5.796 147,2 4,400 3259 17,590 13030 251,600 113975 45 5-5/8 142,88 5-3/4 146,1X-LINE 6-5/8 168,28 70 24 35,67 5.921 150,4 0.352 8,94 7 177,8 5.796 147,2 3,900 2889 15,700 11630 420,720 190586 76 5-5/8 142,88 5-3/4 146,1TSWP° 7 177,8 96 25.66 38,14 6.276 159,4 0.362 9,19 6.151 156,2 4,970 3681 19,880 14726 315,200 142786 52 6.00 152,4 6-1/8 155,6X-LINE 7 177,8 71 26 38,64 6.276 159,4 0.362 9,19 7.39 187,7 6.151 156,2 4,500 3333 20,900 15481 482,640 218636 80 6.00 152,4 6-1/8 155,6TSWP 7-1/4 184,15 128 23.19 34,47 6.624 168,3 0.313 7,95 7.5 190,5 6.499 165,1 6,330 4689 25,300 18741 437,900 198369 56 6-3/8 161,93 6-1/2 165,1TSWP 7-3/8 187,3 94 28.04 41,68 6.63 168,3 0.38 9,5 0 6.5 165 5,700 4,222 22,800 16,889 343,000 155,379 52 6-3/8 161,9 6-1/2 165,1TSWP 7-3/8 187,3 109 28.04 41,68 6.63 168,3 0.38 9,5 0 6.5 165 5,725 4,241 22,900 16,963 341,300 154,609 52 6-3/8 161,9 6-1/2 165,1TSWP 7-5/8 193,7 166 25.56 37,99 6.97 177 0.33 8,3 0 6.84 174 5,080 3,763 20,300 15,037 309,300 140,113 51 6-3/4 171,5 6-7/8 174,6TSWP 7-5/8 193,7 122 29.04 43,16 6.88 174,6 0.38 9,5 0 6.75 172 5,650 4,185 22,600 16,741 378,500 171,461 55 6-5/8 168,3 6-3/4 171,5TSWP 7-5/8 193,7 80 29.04 43,16 6.88 174,6 0.38 9,5 0 6.75 172 6,120 4,533 24,500 18,148 355,000 160,815 52 6-5/8 168,3 6-3/4 171,5TSWP 7-5/8 193,7 81 33.04 49,11 6.77 171,8 0.43 10,9 0 6.64 169 7,520 5,570 30,100 22,296 398,900 180,702 51 6-1/2 165,1 6-5/8 168,3X-LINE 7-5/8 193,7 87 29.7 44,14 6.84 173,8 0.38 9,5 8.01 204 6.75 172 5,000 3,704 25,300 18,741 531,200 240,634 78 6-9/16 166,7 6-11/16 169,9TSWP 8 203,2 121 30.54 45,39 7.25 184,2 0.38 9,5 0 7.13 181 6,600 4,889 26,400 19,556 362,900 164,394 51 7 177,8 7-1/8 181TSWP 8-1/8 206,4 153 31.04 46,13 7.38 187,3 0.38 9,5 0 7.25 184 6,820 5,052 27,300 20,222 373,900 169,377 51 7-1/8 181 7-1/4 184,2TSWP 8-1/8 206,4 97 35.92 53,39 7.25 184,2 0.44 11,1 0 7.13 181 8,370 6,200 33,500 24,815 398,500 180,521 47 7 177,8 7-1/8 181TSWP 8-1/8 206,4 97 38.42 57,1 7.19 182,5 0.47 11,9 0 7.06 179 9,150 6,778 36,600 27,111 457,500 207,248 51 6-15/16 176,2 7-1/16 179,4TSWP 8-3/8 212,7 163 33.95 50,46 7.58 192,5 0.4 10,1 0 7.45 189 7,500 5,556 30,000 22,222 404,900 183,420 51 7-1/4 184,2 7-3/8 187,3TSS 8-3/8 212,7 106 37.09 55,13 7.5 190,5 0.44 11,1 0 7.38 187 7,000 5,185 28,100 20,815 441,000 199,773 55 7-1/4 184,2 7-3/8 187,3

TSWP 8-5/8 219,1 151 31.1 46,22 7.92 201,2 0.35 8,9 0 7.8 198 6,700 4,963 27,100 20,074 335,300 151,891 41 7-9/16 192,1 7-11/16 195,3X-LINE 8-5/8 219,1 103 36 53,51 7.81 198,5 0.4 10,2 9.12 232 7.7 196 5,500 4,074 37,100 27,481 652,000 295,356 79 7-1/2 190,5 7-5/8 193,7TSWP 8-5/8 219,1 110 39.29 58,4 7.73 196,2 0.45 11,4 0 7.6 193 9,950 7,370 39,800 29,481 475,200 215,266 51 7-1/2 190,5 7-11/16 195,3TSWP 9 228,6 139 38.92 57,85 8.15 207 0.43 10,8 0 7.99 203 9,920 7,348 39,700 29,407 458,400 207,655 50 7-7/8 200 8 203,2TSWP 9-5/8 244,5 152 38.94 57,88 8.84 224,4 0.4 10 0 8.68 220 10,450 7,741 41,800 30,963 463,400 209,920 51 8-1/2 215,9 8-3/8 212,7TSWP 9-5/8 244,5 140 42.7 63,46 8.76 222,4 0.44 11 0 8.6 218 11,750 8,704 47,000 34,815 507,800 230,033 51 8-1/4 209,6 8-1/2 215,9X-LINE 9-5/8 244,5 114 43.5 64,65 8.67 220,1 0.44 11 10.1 257 8.6 218 6,000 4,444 48,500 35,926 836,960 379,143 83 8-1/4 209,6 8-1/2 215,9TSWP 9-5/8 244,5 170 46.14 68,58 8.68 220,5 0.47 12 0 8.53 217 13,000 9,630 52,100 38,593 543,800 246,341 50 8-1/4 209,6 8-1/2 215,9TSWP 10-3/4 273,1 155 44.22 65,72 9.95 252,7 0.4 10,2 0 9.79 249 13,150 9,741 52,600 38,963 531,000 240,543 51 9-1/2 241,3 9-3/4 247,7TSWP 10-3/4 273,1 154 49.5 73,57 9.85 250,2 0.45 11,4 0 9.69 246 15,600 11,556 62,400 46,222 595,600 269,807 51 9-3/8 238,1 9-5/8 244,5TSWP 10-3/4 273,1 124 49.5 73,57 9.85 250,2 0.45 11,4 0 9.69 246 14,250 10,556 57,000 42,222 606,000 274,518 52 9-3/8 238,1 9-5/8 244,5TSWP 10-3/4 273,1 147 54.21 80,57 9.76 247,9 0.5 12,6 0 9.6 244 17,550 13,000 70,200 52,000 641,800 290,735 50 9-1/4 235 9-1/2 241,3TSWP 11-3/4 298,5 156 52.57 78,13 10.9 276,4 0.44 11 0 10.7 272 12,130 8,985 48,500 35,926 ++377,400 170,962 44 10 1/8 257,2 10-5/8 269,9TSWP 11-3/4 298,5 125 58.81 87,41 10.8 273,6 0.49 12,4 0 10.6 270 13,230 9,800 52,900 39,185 ++470,400 213,818 49 10 254 10-1/2 266,7TSWP 12-3/4 323,9 150 49.56 73,66 12 304,8 0.38 9,5 13.5 343 11.8 301 28,500 21,111 114,100 84,519 ++807,300 366,954 49 11 279,4 11-1/2 292,1TSWP 13-3/8 339,7 134 66.11 98,26 12.4 315,3 0.48 12,2 13.75 349 12.3 311 25,000 18,519 100,300 74,296 ++788,900 358,590 52 11-1/2 292,1 12 304,8TSWP 16 406,4 426 81.97 121,8 15 381,3 0.5 12,6 16.75 426 14.8 377 43,000 31,852 172,000 127,407 ++1,231,700 559,863 52 14-1/4 362 14-3/4 374,6

++ = J-55 material

43

FISHING SERVICES

N-80 PIPE WITH W.P. HYDRIL CONNECTIONSSPECIFICATION GUIDE

Effective Joint Effective Calculated Joint Size Area Calculated Effic- Area Max. Working Effic- Recommended OD Weight Wall ID Calculated Yield iency Calculated Torque iency Make-up

(In.) (mm) (lbs/ft) (kg/m) (In.) (mm) (In.) (mm) at (lbs) (kg) % at (ft/lbs) (N/m) % (ft/lbs) (N/m)

2-1/4 57,2 4.12 6,12 0.19 4,7 1.875 47,6 BOX 52,000 23,556 53.5 PIN 650 481 33.7 100 74

2-3/4 69,9 6.68 9,93 0.25 6,4 2.25 57,2 BOX 81,000 36,693 51.7 PIN 1,600 1185 43.1 230 170

3-1/4 82,6 8 11,89 0.25 6,4 2.75 69,9 BOX 98,000 44,394 52.1 PIN 2,300 1704 42.9 320 237

3-1/2 88,9 9.91 14,73 0.29 7,3 2.922 74,2 BOX 119,000 53,907 51.2 PIN 3,400 2519 47.1 500 370

3-3/4 95,3 9.32 13,85 0.25 6,4 3.25 82,6 BOX 115,000 52,095 52.2 PIN 3,200 2370 42.5 450 333

4 101,6 11.6 17,24 0.29 7,3 3.428 87,1 BOX 139,000 62,967 52.1 PIN 4,500 3333 46.6 650 481

4 101,6 14 20,81 0.33 8,4 3.34 84,8 PIN 131,000 59,343 47.1 PIN 4,600 3407 42.3 650 481

4 101,6 15.7 23,33 0.38 9,7 3.24 82,3 BOX 175,000 79,275 50.8 PIN 6,000 4444 50.7 870 644

4-3/8 111,1 12 17,84 0.28 7,0 3.825 97,2 BOX 145,000 65,685 51.1 PIN 4,900 3630 43.3 700 519

4-1/2 114,3 11.6 17,24 0.25 6,4 4 101,6 BOX 140,000 63,420 52.3 PIN 4,200 3111 38.2 600 444

4-1/2 114,3 16.6 24,67 0.34 8,6 3.826 97,2 BOX 182,000 82,446 51.6 PIN 6,700 4963 47 960 711

5 127,0 15 22,29 0.3 7,5 4.408 112,0 BOX 180,000 81,540 51.4 PIN 7,000 5185 43.5 1,000 741

5 127,0 18 26,75 0.36 9,2 4.276 108,6 BOX 219,000 99,207 51.8 PIN 9,400 6963 49.5 1,300 963

5-1/2 139,7 17 25,27 0.3 7,7 4.892 124,3 BOX 204,000 92,412 51.3 PIN 9,000 6667 44.2 1,300 963

5-5/8 142,9 17.7 26,31 0.31 7,9 5 127,0 PIN 209,000 94,677 50 PIN 10,000 7407 45.8 1,400 1037

5-3/4 146,1 18 26,75 0.31 8,0 5.125 130,2 PIN 222,000 100,566 52 PIN 10,300 7630 45.1 1,500 1111

5-3/4 146,1 22.5 33,44 0.38 9,7 4.99 126,7 BOX 265,000 120,045 51.6 PIN 13,600 10074 50.3 1,900 1407

6 152,4 20 29,73 0.32 8,2 5.352 135,9 BOX 232,000 105,096 50.2 PIN 12,200 9037 47.1 1,700 1259

6-3/8 161,9 24 35,67 0.38 9,5 5.625 142,9 BOX 286,000 129,558 50.5 PIN 16,800 12444 50.3 2,400 1778

6-5/8 168,3 24 35,67 0.35 8,9 5.921 150,4 BOX 280,000 126,840 50.4 PIN 16,900 12519 49.1 2,400 1778

7 177,8 26 38,64 0.36 9,2 6.276 159,4 BOX 301,000 136,353 49.8 PIN 18,000 13333 45.4 2,600 1926

7-3/8 187,3 29 43,10 0.38 9,5 6.625 168,3 BOX 329,000 149,037 49.9 PIN 21,200 15704 46.3 3,000 2222

7-1/2 190,5 28 41,62 0.37 9,3 6.765 171,8 BOX 334,000 151,302 50.7 PIN 21,300 15778 45.6 3,000 2222

7-5/8 193,7 29.7 44,14 0.38 9,5 6.875 174,6 BOX 340,000 154,020 49.8 PIN 22,700 16815 46.2 3,200 2370

8-1/8 206,4 39.5 58,71 0.47 11,9 7.185 182,5 BOX 455,000 206,115 50.4 PIN 35,200 26074 51.6 5,000 3704

8-3/8 212,7 35.5 52,76 0.38 9,5 7.625 193,7 BOX 376,000 170,328 49.8 PIN 27,700 20519 46.1 4,000 2963

8-5/8 219,1 36 53,51 0.4 10,2 7.825 198,8 BOX 418,000 189,354 50.6 PIN 33,000 24444 48.8 4,700 3481

9 228,6 40 59,45 0.43 10,8 8.15 207,0 PIN 463,000 209,739 50.5 PIN 38,400 28444 49.3 5,500 4074

9-5/8 244,5 43.5 64,65 0.44 11,0 8.755 222,4 BOX 502,000 227,406 49.9 PIN 46,100 34148 50.1 6,600 4889

10-3/4 273,1 51 75,80 0.45 11,4 9.85 250,2 BOX 578,000 261,834 49.6 PIN 60,300 44667 50.3 8,600 6370

11-3/4 298,5 60 89,18 0.49 12,4 10.77 273,6 BOX 687,000 311,211 49.7 PIN 81,000 60000 51.9 11,600 8593

13-3/8 339,7 72 107,01 0.51 13,1 12.35 313,6 BOX 833,000 377,349 50.1 PIN 90,400 66963 42.2 12,900 9556

16 406,4 84 124,85 0.5 12,6 15.01 381,3 BOX 970,000 439,410 50.3 PIN 123,000 91111 40.7 17600 13037

44

FISHING SERVICES

ROTARY SHOESSUPERLOY ®, BORIUMProduct Nos. 150-08 & 150-11Rotary Shoes are hollow cylindrical mill-ing tools. For stuck drillpipe or tubing,rotary shoes are run in conjunction withwashpipe to wash or mill away forma-tion, contaminated mud, or debris fromaround a fish. When used for packermilling, rotary shoes are run withwashpipe extensions and triple connec-tion subs or with Wilson Model “M”™ J-Joints or “B”™ Packer Retrievers towashover and recover the packer.

Type A Type C

Type D Type E Type F

Type B

Rotary shoes are available in manydesigns. For packer milling, a rotaryshoe has a cutting structure on the bot-tom and ID only. Milling over a stabilizerwith carbide inserts, the cutting structurewould cover the OD, ID, and bottom ofthe shoe. The shoes shown are only themost common. In many cases, there areseveral shoes which will accomplish thesame end result. For these reasons, theordering of rotary shoes should be based

on the recommendation of fishing toolspersonnel so that the proper design isselected.

FEATURES/BENEFITS• Manufactured from heat-treated alloy

steels• Wide variety of types• Easily modified to suit purpose• Dressing with SUPERLOY• Available in all washpipe connections

45

FISHING SERVICES

METAL MUNCHER Rotary ShoeProduct No. 150-10

METAL MUNCHER ®

ROTARY SHOEProduct No. 150-10The METAL MUNCHER Rotary Shoe issimilar to the standard SUPERLOY®

Rotary Shoe in design. The METALMUNCHER shoe differs in that METALMUNCHER inserts have been placed tobe the lead cutting structure on the shoe.As with other METAL MUNCHER appli-cations, the life of the tool and the rate ofpenetration are dramatically increased.On most shoes, the inserts are backedup by SUPERLOY so that in the event ofinsert failure, the shoe will operate aswell as a standard SUPERLOY shoe.Half inserts are available so the shoesmay be dressed on the ID.

METAL MUNCHER Rotary Shoesare better suited than standard shoes forthe milling over of retrievable packersand bridge plugs. Often the job iscompleted in one run. For Inconel andother alloys with work hardening charac-teristics, the METAL MUNCHER shoesprovide an aggressive enough cuttingstructure to allow constant removal ofmaterial before hardening can occur.

FEATURES/BENEFITS• The METAL MUNCHER aggressive

cutting insert• Inserts backed up by SUPERLOY• Longer milling life• Wide variety of types• Available in all washpipe sizes

Type G Type H

Type J Type L

46

FISHING SERVICES

TRI-STATE™ WITH PACK-OFF“J” ™ SAFETY JOINTProduct Nos. 140-37 & 140-41The “J” Safety Joint provides a simple, yet effec-tive means of releasing and re-engaging fishingtools, such as taps or die collars, that are normallynot releasable. “J” Safety Joints can be used asbackoff connectors on washover jobs to save rigtime by connecting to the washed over fish whilethe washover pipe is in the hole.

The “J” Safety Joint is a two-piece unit that issecured when lugs on the top half engage with aJ-slot on the bottom half. Special shear screwskeep the tool securely fastened until the fish isengaged.

Once the fish is engaged, a tension load of10,000 lbs (4545 kg) per shear screw is applied tothe string. When the screws have been shearedand the tension released, the string is elevatedwhile applying slight left-hand torque. The lugsthen shift into the release slot, and the two halvesof the safety joint separate.

To reengage the safety joint, the string islowered while rotating slowly to the right until thelugs on the top half engage the slots in the lowerhalf. Rotation is then stopped, right-hand torqueis maintained and the string is lowered until thejoint is fully engaged. The joint remains engageduntil the releasing procedure is repeated.

Standard operation is as a left-hand releaseand right-hand connection tool. Right-hand re-lease and/or left-hand connection configurationsare available through special order.

FEATURES/BENEFITS• Provides a release option from tools such as

taper taps or die collars which are normallynon-releasable

• Provides a way to connect or disconnect fishingstring and stuck fish

• Shear screws prevent accidental unlatching ofthe “J” Safety Joint before engagement with thefish

• Simple construction allows easy make-up andrelease

• Accessory parts such as a packoff sub and twodifferent stingers are available for operationsthat require circulation through the safety joint tothe fish

• Body parts constructed from AISI 4140 heat-treated alloy steel

WASHOVER BACKOFFSAFETY JOINTProduct No. 140-38The Washover Backoff Safety Joint is a multi-purpose safety joint installed in the washoverstring in place of the washpipe drive sub. TheWashover Backoff Safety Joint can be used likestandard drilling safety joints. In the event of awashover string becoming stuck, the washoverbackoff safety joint can easily be backed off fromsurface so the fishing string above the washpipemay be recovered.

In a washover and backoff situation theWashover Backoff Safety Joint, run in conjunctionwith a “J” Safety Joint, makes it possible towashover a stuck string, screw into the fish, andperform a backoff.

Once the fish has been screwed into; and, it isestablished that the fish cannot be pulled, the “J”Safety Joint can be released to allow the washpipeto reciprocate and rotate. Once a string shot hasbeen run just above the “J” Safety Joint, the fishcan be reengaged and backed off. If the washpipewill not turn freely to the left, due to the anti-frictionring of the Washover Safety Joint, this point willunscrew. The long threaded area makes it pos-sible to back off all tool joint connections and mosttubing connections without completely unscrew-ing the Washover Backoff Safety Joint.

The Washover Backoff Safety Joint is avail-able in most washpipe and tool joint connections.

FEATURES/BENEFITS• Saves rig time by making possible to washover,

back off, and recover in one trip• May be used as standard washover safety joint• Simple design, easy to operate

“J” SAFETY JOINTPRODUCT NO. 140-37

SPECIFICATION GUIDEConnection 2-3/8 2-7/8 2-3/8 2-7/8 3-1/2 3-1/2

EUE EUE API IF API IF API IF API FH

Maximum OD (In.) 3-1/16 3.668 3-3/8 4-1/8 4-3/4 4-5/8(mm) 77,8 93,2 85,7 104,8 120,7 117,5

Minimum ID (In.) 7/8 1-7/8 1-3/8 1-3/4 1-3/4 1-1/2(mm) 22,3 47,6 34,9 44,5 44,5 38,1

Connection 4 4-1/2 4-1/2 4-1/2 5-1/2 6-5/8API FH API FH X-Hole API IF API Reg API Reg

Maximum OD (In.) 5-1/4 5-3/4 6-1/4 6-3/8 6-3/4 7-3/4(mm) 133,4 146,1 158,8 160,7 171,5 196,9

Minimum ID (In.) 1-3/4 2 2 2 2-3/4 3(mm) 44,5 50,8 50,8 50,8 69,9 76,2

Washover BackoffSafety Joint

Product No. 140-38

“J” Safety JointProduct No. 140-37

47

FISHING SERVICES

In situations where the fish is notcentralized in the hole, the drill collarspear may be used along with a spearpackoff, several joints of drillpipe, and akick sub to attach the drillpipe to the fishand help guide the washpipe over thefish. The same technique may be usedto start a casing patch over casing.

If the fish falls free during washoveroperations, the spear automaticallycatches it allowing the operation to con-tinue.

FEATURES/BENEFITS• Saves time and reduces number of

trips by combining washover, backoffand recovery operations in a singletrip

• Reduces risk of losing fish duringwashover operations

• Eliminates fish and hole damage fromdropped fish

• Withstand tremendous pulling andshock loads imposed on downholeequipment during fishing operations

• Eliminates need to strip fish out ofwashpipe in any washover operation

• Easy to operate — needs only recipro-cation and partial rotation to manipu-late from set to release position

TRI-STATE™ WASHOVERDRILL COLLAR SPEARProduct No. 140-14Washover Drill Collar Spears are usedwith washover strings to catch and re-cover drill collars and pipe which havebecome stuck off bottom. The spearenables washover, backoff, and recov-ery operations to be accomplished in asingle trip and eliminates the problem ofstripping fish out of washpipe by allowingthe fish to be positioned at the bottom ofthe washpipe string.

The Washover Drill Collar Spear isrun inside the washover pipe and set ina control bushing near the bottom of thewashover assembly. The inside assem-bly generally consists of a screw-in orlocking pin sub, taper tap, pin tap, boxtap or other fishing tool; “J” Safety Jointand drill collar spear. The inner assem-bly is made up into the fish. The washpipeis then slacked off to proceed withwashover.

While rotating to the right, theWashover Drill Collar Spear stays in theset position. When making kelly connec-tions, the spear can be manipulated fromset to release position by reciprocatingand partially rotating the washpipe stringto the left.

SPECIFICATION GUIDE

Washover Size (In.) 4-3/8 - 4-3/4 5 - 6 6-5/8 —(mm) 111,1 - 120,6 127 - 152,4 168,3

Maximum OD (In.) 3-3/8 4-5/8 5-1/4 —(mm) 85,7 117,5 133,3

Minimum ID (In.) 7/8 1-3/4 1-1/2 —(mm) 22,2 44,4 38,1

Joint Connection 2-3/8 EUE 2-7/8 API IF 3-1/2 API IF —

Washover Size (In.) 7 - 8-1/8 8-3/8 - 9-5/8 10-3/4 11-3/4(mm) 177,8 - 206,4 212,7 - 244,5 273,1 298,5

Maximum OD (In.) 6-3/4 8-1/4 9-1/4 10-1/4(mm) 171,5 209,6 235 260,4

Minimum ID (In.) 2 2-3/4 2-3/4 2-3/4(mm) 50,8 69,8 69,8 69,8

Joint Connection 4-1/2 API FH 5-1/2 API Reg 6-5/8 API Reg 6-5/8 API Reg

Washover Drill Collar SpearProduct No. 140-14

48

FISHING SERVICES

TRI-STATE™ TYPE “B” ™

CASING AND TUBING SPEARProduct No. 126-09The Type “B” Casing and Tubing Spearsare used to retrieve casing sizes from 4-1/2" to 13-3/8". The design of the spearmakes it the easiest spear on the marketto release. The spear can be set for right-hand or left-hand release and is easilyfield dressed to change the release set-ting. Due to the slotted mandrel design,the spear can be released with onlyenough downward travel to break thefreeze between the slip segments andthe mandrel. Once the freeze is broken,rotate one-quarter round in the releasedirection releasing the spear.

The spear design will protect the slipswhen running down inside the fish andmay be run to any depth. This featuremakes the “B” perfect for setting under-water casing patches.

To engage the spear, it is loweredinto the fish until the slips are past the topof the casing. One-quarter rotation willplace the spear in the catch position. Thespear is released by bumping down thenapplying an equal amount of rotation inthe opposite direction.

FEATURES/BENEFITS• Simple construction• Slips with carburized teeth and large

surface area• Sets for left or right-hand release• Easily dressed for alternate casing

sizes• Optional slips with vertical teeth for

backing off• Easily released

TRI-STATE™ TYPE “D” ™

CASING AND TUBING SPEARProduct No. 120-09The Type “D” Casing and Tubing Spearsare used to retrieve all casing sizes from4-1/2” to 30”. The design of the spearmakes it ideal for backing off casing orrotating out mudline hangers and packerbore receptacles. The spear can be setfor right-hand or left-hand release and iseasily field dressed to change the re-lease setting. The “J” slot, which holdsthe spear in the catch or release position,makes this spear the most reliable for therecovery of small light-weight fish.

To engage the spear, it is loweredinto the fish until the stop ring is takingweight. One-quarter rotation will placethe spear in the catch position. The spearis released by bumping down then ap-plying one-quarter rotation in the oppo-site direction. Because the mandrel musttravel down the body length of the “J” slotto release, the stop ring should not beremoved from the body.

FEATURES/BENEFITS• Simple construction• Slips with carburized teeth and large

surface area• Sets for left or right-hand release• Easily dressed for alternate casing

sizes• Optional slips with vertical teeth for

backing off

“D” Casing andTubing Spear

Product No. 120-09

“B” Casing andTubing Spear

Product No. 126-09

Casing Size (In.) 4-1/2 - 5 5-1/2 - 6-5/8 7 - 8-1/8 8-1/8 -9-5/8(mm) 114,3 - 127 139,7 - 168,3 177,8 - 206,4 206,4 - 228,6

Spear OD (In.) 3-5/8 4-1/2 5-3/4 6-7/8(mm) 92,1 114,3 146,1 174,6

Spear ID (In.) 3/4 3/4 1 3/4 3(mm) 19,1 19,1 44,5 76,2

Casing Size (In.) 9-5/8 - 11-3/4 11-3/4 - 13-3/8 16 - 20 24 - 30(mm) 244,5 - 298,5 298,5 - 338,5 406,4 - 508 609,6 - 762

Spear OD (In.) 8-1/4 10-1/2 14 20-3/4(mm) 209,6 266,7 355,6 527,1

Spear ID (In.) 3 3-1/2 3-1/2 3-1/2(mm) 76,2 88,9 88,9 88,9

TYPE "B" & "D" CASING AND TUBING SPEARSSPECIFICATION GUIDE

49

FISHING SERVICES

TYPE “B” AND “D” CASING AND TUBING SPEARPRODUCT NOS. 126-09 & 120-09

SPECIFICATION GUIDEUnit Tool Top Casing Size Friction Block S lips

OD Connection OD Weight MIn Max MIn Max(In.)(lb/ft) 3-5/8 2-3/8 API Reg 4-1/2 9.50 - 15.50 3-5/8 4-1/4 3-5/8 4-1/8

(mm)(kg/m) 92,1 114,3 14,1- 23 92 108 92 104-7/9(In.)(lb/ft) 3-15/16 2-3/8 API Reg 5 11.50 - 15.00 4-3/16 4-13/16 4-1/8 4-11/16

(mm)(kg/m) 100 127 17,1 - 22,3 106,4 122,2 104,8 119,1(In.)(lb/ft) 3-15/16 2-3/8 API Reg 5 18.00 - 24.20 3-15/16 4- 9/16 3-15/16 4-7/16

(mm)(kg/m) 100 127 26,8 - 36 100 115,9 100 112,7(In.)(lb/ft) 4-1/2 2-7/8 API Reg 5-1/2 13.00 - 14.00 4-1/2 5-3/4 4-5/8 5-1/4

(mm)(kg/m) 114,3 139,7 19,3 - 20,8 114,3 146,1 117,5 133,4(In.)(lb/ft) 4-1/2 2-7/8 API Reg 5,5 15.50 - 23.00 4,5 5,8 4,5 5,1

(mm)(kg/m) 114,3 139-2/3 23 - 34,2 114-2/7 146 114-2/7 130-1/6(In.)(lb/ft) 4-1/2 2-7/8 API Reg 6 15.00 - 26.00 4-3/4 6 5 5-5/8

(mm)(kg/m) 114,3 152,4 22,3 - 38,6 120,7 152,4 127 142,9(In.)(lb/ft) 4-1/2 2-7/8 API Reg 6-5/8 20.00 - 24.00 5-1/4 6-1/2 5-5/8 6-1/4

(mm)(kg/m) 114,3 168-2/7 29,7 - 35,7 133,4 165,1 142,9 158,8(In.)(lb/ft) 5-3/4 3-1/2 API Reg 7 17.00 - 20.00 6 7 6-3/8 7-1/8

(mm)(kg/m) 146,1 177-4/5 25,26 - 35,7 152-2/5 177-4/5 162 181(In.)(lb/ft) 5-3/4 3-1/2 API Reg 7 23.00 - 26.00 6 7 5-3/4 6-1/2

(mm)(kg/m) 146,1 177-4/5 264,6 - 38,6 152-2/5 177-4/5 146 165(In.)(lb/ft) 5-3/4 3-1/2 API Reg 7 29.00 - 38.00 5-3/4 6-3/4 5-3/4 6-1/2

(mm)(kg/m) 146,1 177-4/5 43,1 - 56,5 146 171-4/9 146 165(In.)(lb/ft) 5-3/4 3-1/2 API Reg 7-5/8 20 6-13/16 7-1/16 6-3/4 7-1/2

(mm)(kg/m) 146,1 193-2/3 29,7 173 179-2/5 171-4/9 190-1/2(In.)(lb/ft) 5-3/4 3-1/2 API Reg 7-5/8 24.00 - 39.00 6-1/2 7-1/2 6-3/8 7-1/8

(mm)(kg/m) 146,1 193-2/3 35,7 - 57,9 165 190-1/2 162 181(In.)(lb/ft) 6-7/8 5-1/2 API Reg 8-1/8 32.00 - 41.70 6-13/16 7-1/16 6-3/4 7-1/2

(mm)(kg/m) 174,6 206-3/8 47,6 - 62 173 179-2/5 171-4/9 190-1/2(In.)(lb/ft) 8-1/4 5-1/2 API Reg 9-5/8 29.00 - 43.50 8-1/4 9-1/2 8-9/16 9-1/4

(mm)(kg/m) 209,6 244-1/2 43,1 - 64,6 209-5/9 241-2/7 217-1/2 235(In.)(lb/ft) 8-1/4 5-1/2 API Reg 9-5/8 36.00 - 43.50 8-1/4 9-1/2 8-9/16 9-1/4

(mm)(kg/m) 209,6 244-1/2 53,5 - 64,6 209-5/9 241-2/7 217-1/2 235(In.)(lb/ft) 8-1/4 5-1/2 API Reg 9-5/8 47.00 - 53.50 8-1/4 9-1/2 8 1/4 8-15/16

(mm)(kg/m) 209,6 244-1/2 69,8 - 79,5 209-5/9 241-2/7 209-5/9 227(In.)(lb/ft) 8-1/4 5-1/2 API Reg 10-3/4 32.75 - 40.50 9-1/16 10- 9/16 9-11/16 10-3/8

(mm)(kg/m) 209,6 273 48,7 - 60,2 230-1/5 268-2/7 246 263-1/2(In.)(lb/ft) 8-1/4 5-1/2 API Reg 10-3/4 45.50 - 55.50 8-3/4 10-1/4 9-7/16 10-1/8

(mm)(kg/m) 209,6 273 67,6 - 82,5 222-1/4 260-1/3 239-5/7 257-1/6(In.)(lb/ft) 8-1/4 5-1/2 API Reg 11-3/4 42.00 - 60.00 10-3/8 11-7/8 10-1/2 11-3/16

(mm)(kg/m) 209,6 298-4/9 62,4 - 89,2 263-1/2 301-5/8 266-2/3 284-1/6(In.)(lb/ft) 10-1/2 5-1/2 API Reg 11-3/4 38.00 - 60.00 10-1/2 12 10-5/8 11-1/2

(mm)(kg/m) 266,7 298-4/9 56,5 - 89,2 266-2/3 304-4/5 269-7/8 292(In.)(lb/ft) 10-1/2 5-1/2 API Reg 12-3/4 43.00 - 53.00 11 12-1/2 11-7/9 2-19/64

(mm)(kg/m) 266,7 323-6/7 63,9 - 78,8 279-2/5 317-1/2 299-1/4 58-1/3(In.)(lb/ft) 10-1/2 5-1/2 API Reg 13-3/8 48.00 - 72.00 11-7/8 13-3/8 12-1/32 12-29/32

(mm)(kg/m) 266,7 339-5/7 71,3 - 107 301-5/8 339-5/7 305-3/5 327-5/6(In.)(lb/ft) 14 6-5/8 API Reg 16 65 - 109 14-1/2 16 14-1/2 16

(mm)(kg/m) 355,6 406,4 96,6 - 162 368,3 406,4 368,3 406,4(In.)(lb/ft) 14 6-5/8 API Reg 18 5/8 106 - 117.5 16 5/8 18-1/8 17 18,125

(mm)(kg/m) 355,6 473,1 157,5 - 174,6 422,3 460,4 431,8 460,4(In.)(lb/ft) 14 6-5/8 API Reg 18 5/8 87.5 - 94.5 16 5/8 18-1/8 17-1/2 18-5/8

(mm)(kg/m) 355,6 473,1 130 - 140,5 422,3 460,4 444,5 473,1(In.)(lb/ft) 14 6-5/8 API Reg 20 163 - 187 18 19-1/2 18 19-1/2

(mm)(kg/m) 355,6 508,0 242,3 - 277,9 457,2 495,3 457,2 495,3(In.)(lb/ft) 14 6-5/8 API Reg 20 94 - 133 18 19-1/2 18-1/2 19-5/8

(mm)(kg/m) 355,6 508,0 139,7 - 337,8 457,2 495,3 469,9 498,5(In.)(lb/ft) 20-3/4 6-5/8 API Reg 24 100.5 - 125.5 22-1/2 23-1/2 22-1/2 23-1/2

(mm)(kg/m) 527 609,6 149,4 - 186,5 571,5 596,9 571,5 596,9(In.)(lb/ft) 20-3/4 6-5/8 API Reg 24 304 20-3/4 21-7/8 20-3/4 21-7/8

(mm)(kg/m) 527 609,6 451,8 527 555,6 527 555,6(In.)(lb/ft) 20-3/4 6-5/8 API Reg 24-1/2 100.5 - 113.0 23 24-1/4 23 24-1/8

(mm)(kg/m) 527 622,3 149,4 - 167,9 584,2 615,9 584,2 612,8(In.)(lb/ft) 20-3/4 6-5/8 API Reg 30 235 - 310 27-3/4 29 27-3/4 28-7/8

(mm)(kg/m) 527 762 349,3 - 460,7 704,8 736,6 704,8 733,4

50

FISHING SERVICES

TRI-STATE™ TYPE “C” ™

CASING SPEARProduct No. 126-10The TRI-STATE Type “C” Casing Spearis a special application heavy-duty toolused to internally engage and pull casingin any type of fishing operation. The “C”Spear features more slip area than the“B”, “D”, and “E” Spears, approaching fullcircle, so it is primarily used for recover-ing old or worn casing.

The “C” spear is constructed fromheat-treated alloy steels for maximumdownhole dependability. The carbur-ized teeth of the slips firmly engage thecasing, yet will not damage the casing ina pulling or jarring operation.

The “C” spear is simple to operate.The spear is lowered to fishing depth and

rotated 1/8 th turn to the left to place it inthe catch position. Upward movement ofthe string forces the slips outward fromthe mandrel, engaging the casing. Torelease the spear, drop the string down-ward, breaking the mandrel/slip friction.Rotation of 1/8 th turn to the right puts thespear in the release position. The spearmay be easily converted to left-handrelease.

The “C” Spear can only be dressed ina limited catch range.

FEATURES/BENEFITS• Large surface contact area• Carburized slips• Sets for left or right-hand release• Runs as string spear without stop ring

SPECIFICATION GUIDE Casing Size Friction Block Slips

Spear OD Min Max Min MaxSize (In.) (mm) (lb/ft) (kg/m) (In.) (mm) (In.) (mm) (In.) (mm) (In.) (mm)

7 - 7-5/8 7 177,8 38.00 56,48 5-3/4 146,1 6-1/2 165,1 5-3/4 146,1 6-1/2 165,17 177,8 35.00 52,02 5-3/4 146,1 6-1/2 165,1 5-3/4 146,1 6-1/2 165,17 177,8 32.00 47,56 5-3/4 146,1 6-1/2 165,1 5-3/4 146,1 6-1/2 165,17 177,8 29.00 43,10 5-3/4 146,1 6-1/2 165,1 5-3/4 146,1 6-1/2 165,17 177,8 26.00 38,64 5-3/4 146,1 6-1/2 165,1 5-3/4 146,1 6-1/2 165,17 177,8 20.00 29,73 6-3/8 161,9 7-1/8 181,0 6-3/8 161,9 7-1/8 181,07 177,8 17.00 25,27 6-3/8 161,9 7-1/8 181,0 6-3/8 161,9 7-1/8 181,0

7-5/8 193,7 39.00 57,97 6-3/8 161,9 7-1/8 181,0 6-3/8 161,9 7-1/8 181,07-5/8 193,7 33.70 50,09 6-3/8 161,9 7-1/8 181,0 6-3/8 161,9 7-1/8 181,07-5/8 193,7 29.70 44,14 6-3/8 161,9 7-1/8 181,0 6-3/8 161,9 7-1/8 181,0

8-1/8 - 9 8-1/8 206,4 41.70 61,98 6-7/8 174,6 7-3/4 196,9 6-7/8 174,6 7-21/32 194,58-1/8 206,4 39.50 58,71 6-7/8 174,6 7-3/4 196,9 6-7/8 174,6 7-21/32 194,58-1/8 206,4 35.50 52,76 6-7/8 174,6 7-3/4 196,9 6-7/8 174,6 7-21/32 194,58-1/8 206,4 32.00 47,56 6-7/8 174,6 7-3/4 196,9 6-7/8 174,6 7-21/32 194,58-1/8 206,4 28.00 41,62 7-1/8 181,0 8 203,2 6-7/8 174,6 7-21/32 194,58-3/8 212,7 37.00 54,99 7-1/8 181,0 8 203,2 6-7/8 174,6 7-21/32 194,58-5/8 219,1 49.00 72,83 7-1/8 181,0 8 203,2 6-7/8 174,6 7-21/32 194,58-5/8 219,1 44.00 65,40 7-1/8 181,0 8 203,2 7-7/16 188,9 8-7/32 208,88-5/8 219,1 40.00 59,45 7-1/8 181,0 8 203,2 7-7/16 188,9 8-7/32 208,88-5/8 219,1 36.00 53,51 7-5/8 193,7 8-1/2 215,9 7-7/16 188,9 8-7/32 208,88-5/8 219,1 32.00 47,56 7-5/8 193,7 8-1/2 215,9 7-7/16 188,9 8-7/32 208,88-5/8 219,1 28.00 41,62 7-5/8 193,7 8-1/2 215,9 7-7/16 188,9 8-7/32 208,88-5/8 219,1 24.00 35,67 7-5/8 193,7 8-1/2 215,9 7-23/32 196,1 8-1/2 215,9

9 228,6 55.00 81,75 7-5/8 193,7 8-1/2 215,9 7-7/16 188,9 8-7/32 208,89 228,6 50.20 74,61 7-5/8 193,7 8-1/2 215,9 7-7/16 188,9 8-7/32 208,89 228,6 45.00 66,88 7-5/8 193,7 8-1/2 215,9 7-23/32 196,1 8-1/2 215,99 228,6 40.00 59,45 7-5/8 193,7 8-1/2 215,9 7-23/32 196,1 8-1/2 215,99 228,6 38.00 56,48 7-5/8 193,7 8-1/2 215,9 7-23/32 196,1 8-1/2 215,99 228,6 34.00 50,53 7-5/8 193,7 8-1/2 215,9 7-23/32 196,1 8-1/2 215,9“C” Casing Spear

Product No. 126-10

51

FISHING SERVICES

TRI-STATE™ TYPE “E” ™

CASING SPEARProduct No. 121-09The TRI-STATE Type “E” Casing Spear is aheavy-duty, high-strength tool that withstandsthe most severe downhole requirements. It isavailable in two sizes. The smaller size for 7"to 11-3/4" casing and the larger spear handles13-3/8" to 30" casing. The 7" to 11-3/4" spear,as illustrated, runs with an alternate slip re-tainer nut with stop to indicate proper depthwithin the fish.

The “E” Casing Spear is made from se-lected steels and is much stronger than thetool joints it is designed to run with. The spearis simple and easy to operate. The spearshould be run with the stop sub; however, ithas been used as a string spear. (Caution:Before it can be used as string spear, thefriction between the slips and the casing shouldbe checked to see that there is sufficientfriction to support the slip body so the spearmay be released.)

Drill collars and jars should be run when astuck fish is anticipated. When the spear en-ters the casing, it can be detected by theweight indicator since there is considerablefriction between the slip and casing and whenthe stop sub lands on the casing. The spear is

“E” Casing SpearProduct No. 121-09

usually set for right-hand release. One-halfround of left-hand rotation will place the spearin the catch position allowing the slip cone to bepulled into the slips, expanding the slip causingit to be firmly set in the pipe.

The “E” Casing Spear can be released atany time by bumping down sharply to break thefreeze on the slips then rotating one-half turn tothe right. The spear can be reset to the catchposition by rotating one-half turn to the left.This spear can be set and released any num-ber of times without coming out of the hole.

FEATURES/BENEFITS• Simple design and operation• Sets for right-hand or left-hand release• Rugged design• Easily modified to catch non API casing

sizes• Large catch range for each slip size

TYPE “L” ™ CASING SPEARProduct No. 127-10The Type “L” Casing Spear is designed specifi-cally for the recovery of larger casing sizes.Because of the size of the spear, it is dressed,shipped, and stored on a built-for-purpose skid.The spear can be dressed to recover 26"through 42" casing. (No illustration shown.)

Type “E” Dressing Chart for 7" through 11-3/4" Casing

Casing size (In.) 7 7 7 7 7-5/8 7-5/8 7-5/8 9-5/8(mm) 177,8 177,8 177,8 177,8 193,7 193,7 193,7 244,5

Weight (lb/ft) 17 - 20 23 - 26 29 - 32 35 - 38 20 24 - 29,7 33,7 - 39 32,3-36(kg/m) 25,26 -29,73 34,19 - 38,65 43,11 - 47,57 52,00 - 56,47 26,93 35,66 - 44,13 50,10 - 57,89 48,00 - 53,51

Maximum Catch (In.) 6.688 6.5 6.312 6.125 7.312 7.15 6.9 9.125(mm) 169,9 165,1 160,3 155,6 185,7 181,6 175,3 231,8

Minimum Catch (In.) 6.313 6.125 5.938 5.75 6.937 6.775 6.525 8.75(mm) 160,4 155,6 150,8 146,1 176,2 172,1 165,7 222,3

Casing Size (In.) 9-5/8 9-5/8 10-3/4 10-3/4 10-3/4 10-3/4 11-3/4 11-3/4(mm) 244,5 244,5 273,1 273,1 273,1 273,1 298,5 298,5

Weight (lb/ft) 40-43.5 47-53.5 32.75-40.5 45.5-51 55,5-60,7 65.7-71.1 42-47 54-60(kg/m) 59,45 - 64,67 69,85 - 79,53 48,69 - 60,21 67,62 - 75,79 82,48 - 90,23 97,64 - 105,68 62,44 - 69,85 80,25 - 91,24

Maximum Catch (In.) 9.87 8.813 10.3 10.06 9.87 9.65 11.25 11(mm) 250,7 223,9 261,6 255,5 250,7 245,1 285,8 279,4

Minimum Catch (In.) 9.495 8.469 9.925 9.685 9.495 9.275 10.875 10.625(mm) 241,2 215,1 252,1 246 241,2 235,6 276,2 269,9

Type “E” Dressing Chart for 13-3/8" - 30"

Casing size (In.) 13-3/8 16 18-5/8 20 30 30(mm) 339,7 406,4 473,1 508 762 762

Weight (lbs/ft) 48-72 65-109 73.09-93.96 94-133 309 455(kg/m) 71,33 - 107,03 96,59 - 162,02 108.63 - 139.65 139,70 - 197,68 459,27 676,25

Maximum Catch (In.) 12.875 15.375 18.25 19.625 28.625 27.625(mm) 327 390,5 463,6 498,5 727,1 701,7

Minimum Catch (In.) 11.75 14.313 17 18.563 27.563 26.563(mm) 298,5 363,6 431,8 471,5 700,1 674,7

TYPE “E” CASING SPEARPRODUCT NO. 121-09

SPECIFICATION GUIDE

52

FISHING SERVICES

WELLHEAD CUT &PULL SPEARProduct No. 122-14The Wellhead Cut & Pull Spear is aheavy duty spear designed to latch intosubsea wellhead running profiles. Thelatching dogs are easily changed for thevarious types of subsea wellheads usedtoday. Because the spear latches intothe running profile of the wellhead, therisk of damage to the seal area isminimized.

The spear eliminates the need for amarine swivel. Cutting in tension reducesthe risk of connection failure. Cuttingtorque is reduced minimizing wear andtear on the casing cutter. This assuresextended cutter life.

FEATURES/BENEFITS• Latches into wellhead in wellhead

manufactures running profile• Easily field dressed to catch wellheads

of all major manufactures• Cutting in tension reduces risk of string

failure• Cutting in tension reduces peripheral

movement of cutter• Latching into wellhead profile reduces

the risk of damage to wellhead sealarea

• Cutting and retrieving in one trip re-duces rig time

Wellhead Cut & Pull SpearProduct No. 122-14

TRI-STATE™ TYPE “E” ™ CUTAND PULL CASING SPEARProduct No. 122-13The Type “E” Cut and Pull Spear is an “E”Spear modified for rotation to run intandem with the multi-string cutter. It isavailable in two sizes: 13-3/8" to 30"casing and 9-5/8" casing.

The spear has drive mandrel with 19"free travel that rotates inside the slipbody and a thrust bearing in the bottomsub. By incorporating a right-hand setand left-hand release, the spear is in theset position at all times when cutting. Afishing bumper sub with a minimum of20" stroke is required to release thespear. This also allows the downwardmovement of the spear to keep weightoff the knives of the cutter when releas-ing. The cutting torque of a conventionalmarine swivel and multi-string cutter isreduced by 50% when the swivel is re-placed with the Cut and Pull Spear. Triptime is also reduced to a single trip

FEATURES/BENEFITS• Simple design and operation• Can be set for right-hand or left-hand

release• Rugged design• Easily modified to catch non-API

casing sizes• Most parts interchangeable with

standard “E” Spear• Can be used as conventional casing

spear

Casing Size (In.) 9-5/8 13-3/8 - 30(mm) 244,5 339,7 - 762

Spear ID (In.) 1-1/2 2-1/4(mm) 38,1 57,1

Top Connection 4-1/2 API IF Box 6-5/8 API Reg Box

Bottom Connection 4-1/2 API IF Pin 6-5/8 API Reg Pin

Bearing Dynamic Load (lbs) 113,000 173,102(kg) 51,363 78,682

Bearing Static Load (lbs) 231,000 595,743(kg) 105,000 270,792

TYPE “E” CUT AND PULL CASING SPEARPRODUCT NO. 122-13

SPECIFICATION GUIDE

53

FISHING SERVICES

CASING AND TUBING SPEARPACK-OFF ASSEMBLYProduct Nos. 120-15 & 121-15The Spear Pack-Off is designed to runjust below a casing spear. This allowshydraulic pressure to be applied to thefish. Hydraulic pressure applied to thefish adds tremendous lifting power to thefishing string and aids in the breakdownof sediment or formation that may beholding the fish. In many cases, therunning of this spear accessory may aidin recovering a fish in one piece insteadof resorting to cutting and jarring outsections.

SPECIFICATION GUIDE

Casing Size (In.) 4-1/2 4-1/2 4-3/4 5 5(mm) 114,3 114,3 120,7 127,0 127,0

Casing Weight (lb/ft) 15.3 - 18.1 9.5 - 12.6 16 18 - 21 13 - 15(kg/m) 22,7 - 26,9 14,1 - 18,7 23,8 26,7 - 31.2 19,3 - 22,3

Top Connection 2-3/8 API Reg 2-3/8 API Reg 2-3/8 API Reg 2-3/8 API Reg 2-3/8 API Reg

Casing Size (In.) 5-1/2 5-1/2 5 1/2 5 3/4 6(mm) 139,7 139,7 139,7 146,05 152,4

Casing Weight (lb/ft) 17 - 23 13 - 15 15.5 - 17 14 - 17 20(kg/m) 25,3 - 34,2 19,3 - 22,3 23 - 25,3 20,8 - 25,3 29,7

Top Connection 2-7/8 API Reg 2-7/8 API Reg 2-7/8 API Reg 2-7/8 API Reg 2-7/8 API Reg

Casing Size (In.) 6 6 5/8 6 5/8 7 7(mm) 152,4 158,75 158,75 177,8 177,8

Casing Weight (lb/ft) 14 - 18 24 - 29 20 - 22 38 32 - 35.3(kg/m) 20,8 - 26,7 35,7 - 43,1 29,7 - 32,7 38.6 47,6 - 52,5

Top Connection 2-7/8 API Reg 3-1/2 API Reg 3-1/2 API Reg 3-1/2 API Reg 3-1/2 API Reg

Casing Size (In.) 7 7 7 7-5/8 7-5/8(mm) 177,8 177,8 177,8 193,68 193,68

Casing Weight (lb/ft) 26 - 30 22 - 24 17 - 20 26.4 - 29.7 29.7 - 33.7(kg/m) 38,6 - 44,6 32,7 - 35,7 25,3 - 29,7 39,2 - 44,1 39,2 - 44,2

Top Connection 3-1/2 API Reg 3-1/2 API Reg 3-1/2 API Reg 3-1/2 API Reg 3-1/2 API Reg

Casing Size (In.) 7-5/8 8-5/8 8-5/8 8-5/8 9(mm) 193,68 219,08 219,08 219,08 228,6

Casing Weight (lb/ft) 39 40 - 49 36 - 40 28 - 36 40 - 45(kg/m) 58 59,5 - 72,8 53,5 - 59,5 41,6 - 53,5 59,5 - 66,9

Top Connection 3-1/2 API Reg 4-1/2 API Reg 4-1/2 API Reg 4-1/2 API Reg 4-1/2 API Reg

Casing Size (In.) 9-5/8 9-5/8 10-3/4 11-3/4 13-3/8(mm) 244,48 244,48 273,05 298,45 339,72

Casing Weight (lb/ft) 47 - 53.5 36 - 43.5 32.7 - 55.5 38 - 60 48 - 72(kg/m) 69,8 - 79,5 53.5 - 64,6 48,6 - 82,5 56,5 - 89,2 71,3 - 107

Top Connection 4-1/2 API Reg 4-1/2 API Reg 4-1/2 API Reg 4-1/2 API Reg 6-5/8 API Reg

Casing Spear Pack-Off AssemblyProduct Nos. 120-15

The design incorporates a standardpack-off cup and is available for mostcasing sizes. The pack-off cup is pro-tected by a guide which reduces the riskof damage while tripping or entering thefish.

FEATURES/BENEFITS• May use hydraulic force to apply over

pull to fish• Runs with any type spear• Rugged design

54

FISHING SERVICES

T-DOG OVERSHOTProduct No. 114-07The T-Dog Overshot is a releasable over-shot designed to catch collared pipe andtubing. Integral tubing is caught by re-placing the T-dog assembly with a flip-per-dog assembly. Coiled tubing can berecovered by replacing the T-dog cageassembly with a mouse trap assembly.

The T-Dog Overshot is generally rundirectly above the guide or rotary shoe,but may be run anywhere in the washpipestring. The tool is run down over thestring of pipe, past a collar or connection.The spring-loaded T-dogs then expandto pass over the collar. When the stringis elevated, the dogs firmly engage thecoupling and the fish can be retrieved.

The tool may be released at any timeby picking up and engaging a collar, thenwhile maintaining a slight strain, slowlyrotating it to the right. This action allowsthe T-dogs to expand and release thecoupling.

Top Connection Tool OD (In.) (mm) Tool ID (in.) (mm) Catch Size (In.) (mm) Cage ID (In.) (mm)

3-5/8 TSWP 3-5/8 92,1 2-5/8 66,7 1.600 - 1.900 40,6 - 48,3 2-5/8 66,7

3-13/16 TSWP 3-13/16 96,8 2-3/4 69,8 1.600 - 1.900 40,6 - 48,3 2-5/8 66,7

3-13/16 TSWP 3-7/16 98,4 3-1/8 79,4 1.900 - 2 3/8 EUE 48,3 - 60,3 3-3/16 81

4 TSWP 4-1/16 103,2 3-3/16 81 1.900 - 2-3/8 EUE 48,3 - 60,3 3-3/16 81

4-1/2 TSWP 4-1/2 - 4-11/16 114,3 - 119,1 3-1/4 - 3-3/4 82,5 - 95,2 2-3/8 EUE - 2-7/8 EUE 60,4 3-3/16 - 3-3/4 81 - 95,3

5 X-Line 5-1/2 139,7 3-27/32 97,6 2-3/8 EUE - 2-7/8 EUE 60,4 4-3/16 106,4

5-3/8 TSS 5-1/2 139,7 4-3/16 106,4 2-3/8 EUE - 2-7/8 EUE 60,4 4-3/16 106,4

5-1/2 TSWP 5-1/2 139,7 3-13/16 96,8 2-3/8 EUE - 2-7/8 EUE 60,4 4-3/16 106,4

5-1/2 TSWP 5-5/8 142,9 4-1/4 107,9 2-3/8 EUE - 2-7/8 EUE 60,4 4-1/4 108

5-1/2 X-Line 5-7/8 149,2 4-1/4 107,9 2-3/8 EUE - 2-7/8 EUE 60,4 4-1/4 108

5-1/2 X-Line 5-7/8 149,2 4-5/8 117,5 2-3/8 EUE - 2-7/8 EUE - 60,4 - 101,6 4-5/8 117,5 3-1/2 EUE - 3-1/2 NUE - 4 NUE

5-3/4 TSS 5-7/8 149,2 4-1/4 107,9 2-3/8 EUE - 2-7/8 EUE 60,4 4-1/4 108

5-3/4 TSS 5-7/8 149,2 4-5/8 117,5 2-3/8 EUE - 2-7/8 EUE - 60,4 - 101,6 4-5/8 117,53-1/2 EUE - 3-1/2 NUE - 4 NUE

6-5/8 X-Line 7 177,8 5-1/4 133,3 2-7/8 EUE - 4-1/2 Csg 73 - 114,3 5-1/4 133,4

7 X-Line 7-1/2 190,5 6-3/16 157,1625 4-1/2 Csg - 5 Csg 114,3 6-3/16 157,2

7-5/8 TSWP 7-3/4 196,9 6-1/8 155,575 5-1/2 Csg 139,7 6-1/8 155,6

7-5/8 X-Line 8 203,2 6-3/16 157,1625 4-1/2 Csg - 5-1/2 Csg 114,3 - 139,7 6-3/8 161,9

7-5/8 Speedtite 8-1/8 206,4 6-3/4 171,45 6 Csg 152,4 6-3/4 171,4

SPECIFICATION GUIDE

T-Dog OvershotProduct No. 114-07

FEATURES/BENEFITS• Tool is releasable at any time• Release operation may be repeated

several times without damaging or af-fecting the tool’s ability to reengage

• Solid body with no windows allows theovershot to be used in the washoverstring for one-trip recovery

• Slips energized by finger springs thatplace them in the catch position auto-matically as they pass over and underthe coupling

• Box-x-pin washpipe connections al-low overshot to be positioned at anypoint in the washover string

• Cage design allows unrestricted pas-sage of coupling through the tool al-lowing the washover of several jointsof pipe at one time

• Body constructed from AISI 4140 heat-treated alloy steel with flame-hard-ened slip teeth for positive engage-ment under the coupling

55

FISHING SERVICES

ROLLING DOG OVERSHOTProduct No. 116-07The Rolling Dog Overshot is a washovertype overshot used to catch slick pipe,drill collars, and tubing. It is also used torecover coiled tubing and upset tubing.

The unique design of the rolling dogsallows passage over the fish by rollingback in the body. When the length of fishto be recovered has been reached, anupward pull will set the rolling dogsagainst the pipe. Each dog has a seriesof sharp cutting wickers that bite into thepipe and the more upward pull the tighterthe dogs will grip the fish. This overshotis not releasable after the rolling dogsare engaged. Overpull will allow therolling dogs to shear and recover theovershot.

Rolling Dog OvershotProduct No. 116-07

FEATURES/BENEFITS• Solid body with no windows allows the

overshot to be used in the washoverstring for one-trip recovery

• Dogs are energized by finger springsthat place them in the catch positionautomatically as they pass over andunder the coupling

• Box-x-pin washpipe connections al-low overshot to be positioned eitherdirectly over the rotary shoe or higherup in the washover string

• Cage design allows unrestricted pas-sage of coupling through the tool andlets the operator wash over severaljoints of pipe

• Body constructed from AISI 4140 heat-treated alloy steel with flame-hard-ened slip teeth for positive engage-ment any where on a tube

Top Overshot Overshot Catch DogsConnection OD ID Size Req’d

(In.) (mm) (In.) (mm) (In.) (mm)

1-1/4 HYD.CS 2-1/4 57,2 1-5/16 33,3 1.660 42,2 4

2-7/8S WP. FJ 3 76,2 2 50,8 1.000 25,4 4

3-13/16 TSWP 3-13/16 96,8 2-15/16 74,6 1.750 44,5 6

3-13/16 TSS 3-13/16 96,8 2-3/8 60,3 1.315 - 1.660 - 1.000 33,4 - 42,2 - 25,4 5

3-13-16 TSS 3-13/16 96,8 2-3/8 60,3 0.750 19,1 4

3-13/16 TSS 3-13/16 96,8 2-1/2 63,5 1.900 - 1.315 48,3 - 33,4 5

3-13/16 TSWP 3-13/16 96,8 3-3/16 81,0 0.625 15,9 8

4" TSWP 4-3/8 111,1 3-1/4 82,6 2.375 60,3 5

4-3/8 TSWP 4-1/2 114,3 3-3/16 81,0 2.375 60,3 5

4-1/2 TSWP 4-1/2 114,3 3-3/8 85,7 2.375 60,3 5

5-1/2 TSWP 5-1/2 139,7 4-1/8 104,8 2.875 - 3.375 - 3.625 73 - 85,7 - 92,1 5

5-3/4 TSS 5-3/4 146,1 5 127,0 4.750 120,7 8

5-1/2 X-Line 5-7/8 149,2 4-5/8 117,5 1.315 - 1.660 33,4 - 42,2 4

5-1/2 X-Line 5-7/8 149,2 4-5/8 117,5 2.375 - 2.875 - 1.900 60,3 - 73 - 48,3 - 73 6- 2.875 - 2.375 - 60,3

5-3/4 TSS 6 152,4 4-1/2 114,3 3.500 - 2.875 - 2.375 88,9 - 73 - 60,3 5

7" X-Line 8 203,2 6-1/4 158,8 4.437 112-7/10 8

SPECIFICATION GUIDE

56

FISHING SERVICES

Bulldog OvershotProduct No. 111-07

KELO OVERSHOTProduct No. 110-06The Kelo Overshot is a simple bulldog design overshot. It is used to catch smalldiameter workstrings, sucker rods, or coiled tubing. The socket design incorporatesa single slip which moves vertically along the slip guide. By lowering the overshot overa fish the slip is pushed up the guide, straight pick up will pull the slip down and engagethe fish. The more overpull is applied, the harder the slip will bite into the fish.Therefore the overshot is not releasable.

Kelo Sockets are manufactured with washpipe connections. This allows washpipeto run above the overshot if the workstring ID is insufficient to swallow the fish. Awashover shoe may be run below the overshot to dress a fish that may have beenflared beyond the ID of the Kelo Socket.

FEATURES/BENEFITS• The slip is the only moving part• Slip is constructed of high-grade alloy and carburized to retain sharpness• Simple to operate• Washpipe connection allows options such as dressing guide or oversize guide

SPECIFICATION GUIDEOD of Overshot (In.) 2-1/8 2-1/4 3-1/2 4-1/8 4-1/2 5-3/4

(mm) 53,9 57,2 88,9 104,8 114,3 146,1

Maximum Size (In.) 5/8 1-1/16 1-11/16 2 2.179 1-11/16(mm) 15,9 27 42,9 50,8 55,3 42,9

Minimum Catch (In.) 0 15/32 5/8 0 0 0(mm) 0 11,9 15,9

Top Connection 1-1/4 1-1/2 3-1/2 4 4-1/2 5-3/4CS Hydril CS Hydril TSWP TSWP TSWP TSWP

Bottom Connection Cutlip Guide 1-1/2 3-1/2 4 4-1/2 5-3/4 CS Hydril TSWP TSWP TSWP TSWP

Overshot OD (In.) 3-5/8 3-5/8 4 4-1/16 8-3/8(mm) 92,1 92,1 103,2 103,2 212,7

Catch Size (In.) 2-7/8 3-1/8 3-1/2 3-3/4 7.441(mm) 73,0 79,4 88,9 95,3 189,0

Tensile Yield (lbs) 34,417 17,548 18,965 5,689 99,266(kg) 15591 7949 8591 2577 44967

SPECIFICATION GUIDE

BULLDOG OVERSHOTProduct No. 111-07The Bulldog Overshot is designed for straight pick up only of fish with OD too large tobe caught by any other method. The overshot is a simple design which incorporatesa “C” grapple. The overshot can be manufactured in one or two pieces.

The overshot is not releasable and has limited tensile and torsional strengths.

FEATURES/BENEFITS• Smallest ratio of fish OD to overshot OD• Simple design

Kelo OvershotProduct No. 110-06

57

FISHING SERVICES

HOLLOW MILL CONTAINERAND INSERTProduct No. 151-20The Hollow Mill Assembly, which con-sists of a Hollow Mill Extension and aHollow Mill Insert, is used as an overshotaccessory to mill away flared or over-sized tops of pipe that have twisted orbroken off during drilling operations.Because the fish can pass into the grappleand bowl, the Hollow Mill Assemblymakes it possible to mill and recover in asingle trip.

The Hollow Mill Assembly is made upbetween the overshot bowl and guide.Due to the total torque being applied tothe tang of the Hollow Mill Insert, themilling operation should be carried outwith low weight and torque. Once theoversized top of the fish is milled away,the fish can be engaged according tostandard Bowen releasing overshot pro-cedures.

The Hollow Mill Insert can only beused with basket grapples.

Overshot OD (In.) 3-1/8 3-5/8 3-7/8 4 4-1/8 4-3/8 4-11/16 5-1/4 5-1/4 5-9/16 5-9/16 5-5/8 5-3/4(mm) 79,4 92,1 98,4 100,0 104,8 111,1 119,1 133,4 133,4 141,3 141,3 142,9 146,1

Overshot Bowl No. 9306 9271 1836 5103 9107 4621 9111 4717 9517 5898 5898 5170 8977

Maximum Insert ID (In.) 2 2-19/32 2-5/8 2-19/32 2-5/8 2-7/8 3-1/8 3-3/4 3-1/4 3-11/16 3-11/16 4-1/4 4-1/4(mm) 50,8 65,9 66,7 65,9 66,7 73,0 79,4 95,3 82,6 93,7 93,7 108,0 108,0

Overshot OD (In.) 6-1/8 6-5/8 7-3/8 7-3/8 7-3/8 7-5/8 7-5/8 7-5/8 7-5/8 7-3/4 7-3/4 8-1/8 8-1/8(mm) 155,6 168,3 187,3 187,3 187,3 193,7 193,7 193,7 193,7 196,9 196,9 206,4 206,4

Overshot Bowl No. 7788 8617 3522 6152 9694 1641 1657 7574 9862 9134 9164 9219 9817

Maximum Insert ID (In.) 4-3/8 4-7/8 5 5 5-5/8 5-9/16 5-3/8 5-1/4 5-7/8 6 5-5/8 6-3/8 6-3/8(mm) 111,1 123,8 127,0 127,0 142,9 141,3 136,5 133,4 149,2 152,4 142,9 161,9 161,9

Overshot OD (In.) 8-1/8 8-5/8 8-7/8 8-7/8 9-3/8 9-1/2 9-5/8 10-1/2 10-5/8 11-1/4 11-3/4 12-3/4 —(mm) 206,4 219,1 225,4 225,4 238,1 241,3 244,5 266,7 269,9 285,8 298,5 323,9

Overshot Bowl No. 3711 7801 9852 10261 1501 9062 266 5307 5323 12824 5331 15802 —

Maximum Insert ID (In.) 5-3/4 6-1/4 7-1/8 6-1/2 7 7-3/4 7-1/4 8-1/8 8-1/4 8-7/8 9-3/8 10-1/2 —(mm) 146,1 158,8 181,0 165,1 177,8 196,9 184,2 206,4 209,6 225,4 238,1 266,7

SPECIFICATION GUIDE

Hollow Mill Container and InsertProduct No. 151-20

FEATURES/BENEFITS• Permits milling and recovery in a single

trip• Unique taper design of insert permits

full removal of flared or oversized topfish

• Mill insert placement allows the fish tobe dressed before the grapple en-gages and gives the operator a posi-tive indication that the overshot willswallow the fish

• Insert made from low-alloy steel toallow multiple redressing and avoidstress cracking

• Mill insert dressed with SUPERLOYcrushed carbide cutting material toensure efficient milling

• Extension constructed from AISI 4140heat-treated alloy steel for superiorstrength

58

FISHING SERVICES

HIGH PRESSURE PACK-OFFProduct No. 110-59The High Pressure Pack-Off Assemblyis an overshot accessory that is runbetween the top sub and the bowl of anovershot to establish high pressure cir-culation. The pack-off is a simple designconsisting of the pack-off sub with pack-ing and packing retainer rings.

Once a clean fish top has been es-tablished, the High Pressure Pack-offcan be run with an overshot. The fish isengaged as per operating instructionsfor the overshot being used. Once thefish has been positively engaged, it ispossible to apply two to three times the

pressure which can normally be appliedto a standard overshot packing.

The packing is normally stacked tohold pressure internally and externally.

FEATURES/BENEFITS• Converts standard overshot to a tem-

porary or permanent patch• Allows high pressure circulation to re-

move ID blockage• Packing corrosion resistant• Packing rings pressure energized for

positive seal on fish• Pack-off threads compatible with most

overshot threads• H

2S service assemblies available on

request

Bowl Overshot Size to Burst Bowl Overshot Size to BurstNo. Size Pack-Off Pressure No. Size Pack-Off Pressure

Body-psi Body-psi

9271 (In./psi) 3-5/8 1-1/4 7,200 8977 (In./psi) 5-3/4 4 8,600(mm/bar) 92,1 31,8 496,6 (mm/bar) 146,1 101,6 593,1

9271 (In./psi) 3-5/8 1,660 7,200 8977 (In./psi) 5-3/4 3-1/2 8,600(mm/bar) 92,1 42,2 496,6 (mm/bar) 146,1 88,9 593,1

9271 (In./psi) 3-5/8 2 7,200 8977 (In./psi) 5-3/4 4-1/8 8,600(mm/bar) 92,1 50,8 496,6 (mm/bar) 146,1 104,8 593,1

9271 (In./psi) 3-5/8 2-1/16 7,200 8977 (In./psi) 5-3/4 4-1/2 8,600(mm/bar) 92,1 52,4 496,6 (mm/bar) 146,1 114,3 593,1

9271 (In./psi) 3-5/8 2-3/8 7,200 7788 (In./psi) 6-1/8 3-1/2 5,600(mm/bar) 92,1 60,3 496,6 (mm/bar) 155,6 88,9 386,2

B5103 (In./psi) 3-7/8 2-3/8 7,100 6152 (In./psi) 7-3/8 4 8,000(mm/bar) 98,4 60,3 489,7 (mm/bar) 187,3 101,6 551,7

B5103 (In./psi) 3-7/8 2-7/8 7,100 9694 (In./psi) 7-3/8 4 5,500(mm/bar) 98,4 73,0 489,7 (mm/bar) 187,3 101,6 379,3

B1836 (In./psi) 3-7/8 2-7/8 9,050 B3522 (In./psi) 7-3/8 4 7,000(mm/bar) 98,4 73,0 624,1 (mm/bar) 187,3 101,6 482,8

9107 (In./psi) 4-1/8 1,900 9,000 9694 (In./psi) 7-3/8 4-1/2 5,500(mm/bar) 104,8 48,3 620,7 (mm/bar) 187,3 114,3 379,3

9107 (In./psi) 4-1/8 2-3/8 9,000 7574 (In./psi) 7-5/8 3-1/2 7,500(mm/bar) 104,8 60,3 620,7 (mm/bar) 193,7 88,9 517,2

8223 (In./psi) 4-1/8 2-3/8 8,000 7574 (In./psi) 7-5/8 4 7,500(mm/bar) 104,8 60,3 551,7 (mm/bar) 193,7 101,6 517,2

B5117 (In./psi) 4-1/8 2-7/8 9,000 9134 (In./psi) 7-3/4 4-1/2 5,100(mm/bar) 104,8 73,0 620,7 (mm/bar) 196,9 114,3 351,7

9107 (In./psi) 4-1/8 2-7/8 9,000 9134 (In./psi) 7-3/4 5 5,100(mm/bar) 104,8 73,0 620,7 (mm/bar) 196,9 127,0 351,7

8223 (In./psi) 4-1/8 2-7/8 8,000 1657 (In./psi) 7-7/8 4-1/2 5,500(mm/bar) 104,8 73,0 551,7 (mm/bar) 200,0 114,3 379,3

9107 (In./psi) 4-1/8 3-1/16 9,000 1657 (In./psi) 7-7/8 5-1/2 5,500(mm/bar) 104,8 77,8 620,7 (mm/bar) 200,0 139,7 379,3

B4621 (In./psi) 4-3/8 2-7/8 5,800 9134 (In./psi) 8 4-1/2 7,100(mm/bar) 111,1 73,0 400,0 (mm/bar) 203,2 114,3 489,7

9111 (In./psi) 4-11/16 2-1/16 8,400 9134 (In./psi) 8 5 7,100(mm/bar) 119,1 52,4 579,3 (mm/bar) 203,2 127,0 489,7

9111 (In./psi) 4-11/16 2-3/8 8,400 9219 (In./psi) 8-1/8 4-1/2 4,800(mm/bar) 119,1 60,3 579,3 (mm/bar) 206,4 114,3 331,0

9111 (In./psi) 4-11/16 2-7/8 8,400 9219 (In./psi) 8-1/8 5 4,800(mm/bar) 119,1 73,0 579,3 (mm/bar) 206,4 127,0 331,0

B4717 (In./psi) 5-1/4 3-1/2 6,500 9219 (In./psi) 8-1/8 5-1/2 4,800(mm/bar) 133,4 88,9 448,3 (mm/bar) 206,4 139,7 331,0

5898 (In./psi) 5-9/16 2-3/8 8,600 B3711 (In./psi) 8-1/8 6-1/4 5,500(mm/bar) 141,3 60,3 593,1 (mm/bar) 206,4 158,8 379,3

8977 (In./psi) 5-3/4 2-3/8 8,600 7801 (In./psi) 8-5/8 4-1/2 6,000(mm/bar) 146,1 60,3 593,1 (mm/bar) 219,1 114,3 413,8

8977 (In./psi) 5-3/4 3-1/16 8,600 15802 (In./psi) 12-3/4 10-3/4 3,400(mm/bar) 146,1 77,8 593,1 (mm/bar) 323,9 273,1 234,4

8977 (In./psi) 5-3/4 3-1/16 8,600 — — — — —(mm/bar) 146,1 77,8 593,1

SPECIFICATION GUIDE

High Pressure Pack-OffProduct No. 110-59

59

FISHING SERVICES

CENTER PRONG AND CRANKSHAFT ROPE SPEARProduct Nos. 120-28 & 122-29The Rope Spear is a reliable and efficient wireline and wire roperetrieval tool. The rope spear retrieves all sizes of electric wireline,slick line, braided line, or other types of wire rope that have been leftdownhole. It can also be used to retrieve control line or ESP cablethat has been left downhole. This tool has been very successful inrecovering these items in cased or open hole.

The Rope Spear is one of the easiest tools in the industry tooperate. The tool is dressed with the proper lower shank, rundownhole on two or three drill collars to the required depth, androtated to the right until ample contact with the wireline is achieved.As the workstring is pulled up, the wireline that is wrapped around thespear slips down and latches onto the barbs. Assuming satisfactorycontact is made with the wireline, the retrieval operation can besuccessfully completed in one run.

FEATURE/BENEFITS• One of industry’s most reliable, efficient tools for retrieving wireline• Proven track record of hundreds of successful runs and many

years of maintenance-free service• Retrieves cut wireline and rope still attached to a tool stuck

downhole

SPECIFICATION GUIDE

Casing Size (In.) 4-1/2 - 10-3/4 5 - 10-3/4 7-5/8(mm) 114,3 127 193,7

Top Connection 2-3/8" API Reg 2-7/8" API Reg 4-1/2" API IF

OD of Tool (In.) 3-1/8 4-1/8 6-1/4(mm) 79,4 104,8 158,7

Center Prong Rope SpearProduct No. 120-28

Crankshaft Rope SpearProduct No. 122-29

60

FISHING SERVICES

LATCH JACK SPEARProduct No. 122-28The Latch Jack is a wireline fishing tool de-signed for fishing wire through restrictions orwire that has become balled up. The tool ismanufactured from high tensile steel so that theprongs may be forced down into or around areasonably compacted ball of wire. The designincorporates barbs on the ID only so that wireon the outside of the tool may be easily pulleddown rather then having to yield the wire creat-ing smaller unfishable pieces.

Similar spears are manufactured withoutthe latch in two and three prong designs.

FEATURES/BENEFITS• Fishes wire through restrictions• Fishes balls of wire without creating smaller

broken pieces of wire• Manufactured from AISI 4140 heat-treated

alloy steel

WIRELINE CUTTERProduct No. 170-26The Mechanical Wireline Cutter is used to cuta wireline just above the rope socket of a stucktool. This allows the cut line to be retrieved inone piece while providing a desirable fishingtop on the stuck tool. The cutter is installedover the line and run in on wireline or pipe, ifclearances permit.

The cutter is installed over the wireline byremoving the keeper block. The keeper blockis replaced and the cutter attached to a run-inline by means of a rope socket or crossoversub. Cutting knives are then activated byapplying an upward strain on the run-in line orpipe that continues until the cut is indicated.The cut wireline and run-in line (or pipe) arethen retrieved and fishing operations begun onthe stuck tool.

It may be desirable, when line condition isquestionable, to make a “dummy run” withcutter knives removed to be certain that noobstacles are encountered from surface downto the stuck tool.

FEATURES/BENEFITS• Allows wireline to be retrieved in one piece• Provides a desirable fishing top in the stuck

tool• Saves rig time by eliminating fishing trips

with wire-rope spears• Eliminates the need for a rig if wireline and

stuck tools can be recovered with anotherwireline unit

WIRELINE CUTTERPRODUCT NO. 170-26

SPECIFICATION GUIDE

Size OD (In.) 1-7/8 2-1/4 3-1/2 4-1/4(mm) 47,6 57,2 88,9 108

Top Connection 5/8 7/8 2-3/8 2-7/8Rod Pin Rod Pin EUE EUE

Maximum Size (In.) 1/2 3/4 1 1of Cut (mm) 12,7 19,1 25,4 25,4

WILSON MOUSE TRAP INSERTProduct No. 112-07The Wilson Mouse Trap or Trap Door Insert isa simple flapper design which is highly effectiveat fishing cable, sucker rods, small tubing,washstring, or coiled tubing. Depending on theapplication, the flapper may be manufacturedwith cutting or gripping capabilities.

The Overshot with the Mouse Trap Insertcan be run below washpipe or any suitablestring for swallowing the fish. Reverse circula-tion may be used to help pull the fish into theovershot. Due to the flapper design once circu-lation is pumped down the workstring, the flap-pers will be forced down by the circulatingpressure, increasing the bite on the fish orcutting the fish.

FEATURES/BENEFITS• Wide catching range• Can be manufactured to fit any overshot

bowl• Manufactured from AISI 4140 heat-treated

alloy steel

Wireline CutterProduct No. 170-26

Latch JackProduct No. 122-28

61

FISHING SERVICES

Hydraulic Packer Retrieving SpearProduct No. 140-66

HYDRAULIC PACKERRETRIEVING SPEARProduct No. 140-66Hydraulic Packer Retrieving Tool(PRT™)provides a highly reliable methodof milling and retrieving permanent pack-ers in one run. This tool provides theoperator two releasing methods should itbecome necessary to release the packerdown hole. The primary method of re-leasing is achieved hydraulically whilethe secondary method is achieved me-chanically.

The primary release is activated byincreasing the flow rate through the toolforcing the grapple up the PRT mandrelinto the release position. The increasedcirculating rate is maintained until thePRT spear has been pulled through thepacker bore. This method of releasinghas proven to be highly successful anddesirable in highly deviated holes wherethe activation of “J” slots or straightoverpull shearing might be difficult.

The secondary method of releasingis accomplished by the shearing of the

SPECIFICATION GUIDE

Series 100 200 300 400 500

Top Connection 1-13/16 TS PRT 2-1/4 TS PRT 2-1/4 TS PRT 3-1/8 TS PRT 3-1/4 6P Acme

OD of Tool (In.) 1-3/4 2-3/8 2-3/4 3-1/2 4-1/4(mm) 44,5 60,3 69,8 88,9 108

Catch Range (In.) 1.968 - 2.750 2.468 - 3.250 3.00 - 4.00 4.00 - 5.00 4.750. - 6.00(mm) 50 - 69,9 62,7 - 83 76,2 - 101,6 101,6 - 127 120,7 - 152,4

emergency shear ring. Normal shearring value ranges from 200,000 to500,000 (90909 to 22727) shear. Jarsshould be run to accommodate the highshearing pull required. This would onlybe used if fluid loss inside a wellboremade it impossible to release by theprimary hydraulic release.

FEATURES/BENEFITS• Simple design; the grapple is the only

moving part• Hydraulic release provides an easy

release mechanism in highly deviatedwells

• Jars may be run with spear• Emergency shear-ring release• Manufactured from AISI 4140 heat-

treated alloy steel• May be used with packer mill or

burning shoe

62

FISHING SERVICES

Packer Retrieving SpearProduct No. 140-31

PACKER RETRIEVING SPEARProduct No. 140-31The Packer Retrieving Spear is used toremove full bore drillable packers fromthe wellbore. It is used as the retrievingmechanism of a packer milling-retriev-ing assembly. The Packer RetrievingSpear passes through the bore of thepacker and engages the lower end toallow a one-trip milling and recoveryoperation.

The Packer Retrieving Spear is in-stalled at the lower end of the millingassembly by means of sufficient exten-sion joints. This allows the spear to clearthe lower end of the packer bore beforethe SUPERLOY® dressed shoe or millmakes contact with the outside of thepacker. When the spear enters thepacker bore the retrieving slip is forcedup into a position where the OD is re-duced to allow passage through thepacker bore. As the slip clears the lowerend of the packer, it drops into the catchposition. The milling operation may now

SPECIFICATION GUIDE

Series 100 200 300 400 500

Top Connection 1-13/16 TS PRT 2-1/4 TS PRT 2-1/4 TS PRT 3-1/8 TS PRT 3-1/4 6P Acme

OD of Tool (In.) 1-3/4 2-3/8 2-3/4 3-1/2 4-1/4(mm) 44,5 60,3 69,8 88,9 108

Catch Range (In.) 1.968 - 2.750 2.468 - 3.250 3.00 - 4.00 4.00 - 5.00 4.750 - 6.00(mm) 50 - 69,9 62,7 - 83 76,2 - 101,6 101,6 - 127 120,7 - 152,4

be performed and the packer retrieved.The spear will remain in catch positionand withstand severe upward strain andsudden movement of the packer. Ifnecessary, the retrieving spear may bereleased from the packer bore by right-hand rotation and lowering of the fishingstring after the spear slip has been pulledinto friction contact with the packer.

FEATURES/BENEFITS• The tool can be released and

reengaged• May be run with a jarring assembly• Wide variety of grapple sizes• Hydraulics or shearing by overpull not

needed to release

63

FISHING SERVICES

“CJ-1” ™ PACKERRETRIEVING SPEARProduct No. 747-51The “CJ-1” Packer is designed to ac-commodate some of the extra longtailpipe assemblies run in the North Sea.The “CJ-1” has three main components:the dog assembly, shear ring, and safetysub with shear screws. The “CJ-1” maybe run with a packer mill or burning shoe.

Once the tool enters the packer bore,the spear is engaged. The spear re-mains in the catch position inside themill-out extension or below the packer.After the packer has been burned over ormilled a sufficient amount to allow it to bepushed downhole, the packer bottomsub will catch on the dogs.

To release the “CJ-1” the shear ringmust first be sheared. The shear ringmost often used has a 60,000 pound

SPECIFICATION GUIDE

Series 80-32 80-47 x 38 80-40 190-60 x 47 190-60 190-75 x 60

Top Connection 2.375 2.875 3.062 3.750 3.750 3.7506P Acme 6P Acme 6P Acme 6P Acme 6P Acme 6P Acme

OD of Tool (In.) 3.17 3.66 3.86 4.56 5.70 5.70(mm) 80,5 92,9 98,0 115,8 144,8 144,8

Catch (In.) 3-1/4 3-3/4 3.00 - 4.00 4-3/4 4.750 - 6.00 6(mm) 82,6 95,3 76,2 - 101,6 120,7 120,7 - 152,4 152,4

“CJ-1” Packer Retrieving SpearProduct No. 747-51

shear value. Once the shear ring hasbeen sheared an overpull of 10,000 to15,000 (4545 to 6818) is applied to theworkstring and the safety nut backed offwhich will allow the dog assembly to bepulled down into the release position.The safety nut is also shear pinned inplace and will not back off due to millingvibration

FEATURES/BENEFITS• Allows one-trip milling and recovery• Simple to operate• Can be used with milling assembly

which offers higher milling weights thanavailable with rotary shoes andwashpipe

• Back-up releasing mechanisms reducerisk of accidentally releasing the spear

64

FISHING SERVICES

SHEAR TYPE PACKERRETRIEVERProduct No. 141-36The Shear Type Packer Retriever Tool(PRT ™) is designed to recover drillablepackers in a one-trip milling and recov-ery operation. The Shear Type PackerRetriever may be run with a packer millor burning shoe.

To avoid accidentally stinging intothe packer, the grapple is shear pinnedin the catch position. As the spearenters the packer bore, the grapple setscrews shear at approximately 15,000lbs (6818 kg) of weight, giving a positiveindication of engaging the packer. Thegrapple is then forced into a position toallow passage through the packer bore.Once through the packer, a return springreturns it to the catch position.

The grapple remains in the catchposition during the milling operation. If itis necessary to release the spear fromthe packer, the workstring is picked up toa load predetermined to shear the pins inthe spear mandrel. Up to six pins, ratedat 20,000 lbs (9090 kg) load each, may

Shear Type Packer RetrieverProduct No. 141-36

SPECIFICATION GUIDE

Series 100 300 400 500

Top Connection 1-13/16 PRT 3-1/8 PRT 3-1/8 PRT 4-1/4 PRT

OD of Tool (In.) 1-13/16 3-1/8 3-11/16 4-5/8 (mm) 46,0 79,4 93,7 117,5

ID of Tool (In.) 3/8 1/2 1/2 1(mm) 9,5 12,7 12,7 25,4

Shear Pin Load (lbs) 60000 110000 110000 110000(kg) 27180 49830 49830 49830

Catch Size (In.) 2.688 3-1/4 - 3 7/8 3-7/8 - 4 - 4.400 4-3/4 - 5 - 6(mm) 68.3 82,6 - 98,4 98,4 - 101,6 - 111,8 120,6 - 127 - 152,4

be used for each tool with the exceptionof the smallest tool, rated at 10,000 lbs(4545 kg) each.

Other tools recommended for run-ning with the PRT assembly include bootbaskets, drill collars, and jars with ditchmagnets in the circulation system.

FEATURES/BENEFITS• Allows one-trip milling and recovery• Ideal for high-angle holes• Simple to operate• Can be used with milling assembly

which offers higher milling weights thanavailable with rotary shoes andwashpipe

• Large circulation courses aid in re-moval of cuttings

• Increases flow area and clearancesreduce junk cutting of casing

• Spear is releasable from the packer• Body parts constructed from AISI 4140

heat-treated alloy steel

65

FISHING SERVICES

WILSON TYPE “M” ™ J-JOINTProduct No. 141-33The Wilson Type “M” J-Joint has a simpletwo piece design consisting of the outerbody and the double “J” mandrel.

The “M” J-Joint is used in conjunctionwith a washover assembly to burn-overand retrieve packers in one trip. The twomain advantages of this tool are thedouble “J” release and the ability to en-gage the fish with any type of fishing toolprior to the burn-over operation and re-main engaged through the operation.

The double “J” design of the mandreleliminates the need to run any type ofsafety joint below the releasing joint.This is a great advantage when a taperor box tap must be used. The double “J”also makes it possible to use higherweights both up and down without acci-dentally releasing.

“M” J-JointProduct No. 141-33

SPECIFICATION GUIDE

Tool OD Drive

In. mm Bushing Mandrel

3-3/4 19,1 3-3/4 W.P. HYD Box x Pin 1-13/16 WFJ Box x Pin

4 101,6 4 W.P. HYD Box x Pin 1-1/4 Reg Box x Pin

4-3/8 111,1 4-3/8 W.P. HYD Box x Pin 1-1/4 Reg Box x Pin

4-1/2 114,3 4-1/2 W.P.HYD Box x Pin 1-1/4 Reg Box x Pin

5.360 136,1 5 X-LINE Box x Pin 2-3/8 Reg Box x Pin

5-1/2 139,7 5-1/2 W.P.HYD Box x Pin 2-3/8 Reg Box x Pin

5-5/8 142,9 5-5/8 W.P.HYD Box x Pin 2-3/8 Reg Box x Pin

6 152,4 6 W.P.HYD Box x Pin 2-3/8 Reg Box x Pin

7.390 187,7 7-5/8 X-LINE Box x Pin 2-3/8 Reg Box x Pin

FEATURES/BENEFITS• Any type catching mechanism may

be run• Eliminates the need for a safety joint• Easily released and reengaged• Can be manufactured with

any washpipe connection• Manufactured from AISI 4140

heat-treated alloy steel• Double “J” eliminates risk of

accidental release

66

FISHING SERVICES

“B” Packer RetrieverProduct No. 141-32

TRI-STATE™ TYPE “B” ™

PACKER RETRIEVERProduct No. 141-32The TRI-STATE Type “B” Packer Re-triever Assembly is used to burn-overand retrieve in one trip packers thatcannot be recovered by conventionalmethods. The tool is designed to be usedwith an engaging device. The tool is alsoused to retrieve blanking plugs from per-manently set packers. Additionally, itcleans sand from the top of the packerafter the well has been reworked orsqueezed above the packer in one trip.

The “B” Packer Retriever Assemblyconsists of two parts: the body withwashpipe threads on both ends and a “J”sub with small diameter workstringthreads. The body has a built-in stop andtwo internal lugs to control the “J” sub.The stop will not allow the “J” sub to passthrough the bottom of the body (Caution:Some types of releasing tools must berun with the “B” Packer Retriever). Shear

SPECIFICATION GUIDE

Washpipe Connection 3-13/16 4 4-3/8 4-3/8 4-1/2 5 5 5-1/2 5-3/4 7-3/8 8-1/8TSWP TSWP TSWP TSWP TSWP TSWP X-line TSWP TSS TSWP TSWP

Bottom “J” Sub Connection 2-1/4 2-3/8 2-3/8 2-1/4 2-3/8 2-3/8 2-7/8 2-3/8 2-7/8 3-1/2 3-1/2PRT FJ EUE PRT EUE EUE EUE API Reg EUE API IF API IF

OD of Body (In.) 3-13/16 4 4-3/8 4-3/8 4-1/2 5 5-3/8 5-1/2 5-3/4 7-3/8 8-1/8(mm) 96,8 101,6 111,1 111,1 114,3 127,0 136,5 139,7 146,1 187,3 206,4

ID of Body (In.) 2-9/16 2-11/16 3-3/16 3-5/16 3-3/16 3-5/8 3-3/4 4-1/16 4-1/4 5-7/8 6-3/8(mm) 65,1 68,3 81,0 84,1 81,0 92,1 95,3 103,2 108,0 149,2 161,9

pins in the body lock the “J” sub inposition until the fish is engaged.

The engaging tool is spaced out sothat the fish will be engaged before theshoe can come in contact with the packeror bridge plug. Once the fish has beenengaged, picking up will shear the pinand allow the body to be released fromthe “J” sub. Normal packer milling op-erations are carried out from this point.When the string is elevated, the “J” subwill reengage the body.

FEATURES/BENEFITS• Packers and tailpipe assemblies with-

out mill-out extensions may be milledover and recovered in one trip

• Any type of engaging device may beused

• Wide selection of washpipeconnections

67

FISHING SERVICES

WILSON HYDRAULICPULLING TOOLProduct No. 140-27The Wilson Hydraulic Pulling Tool isdesigned to pull objects from cased wellbores using hydraulic pump pressure.The tool is designed to anchor in thecasing, exert its pulling force on the fishbelow and transmit this force to the cas-ing rather than the surface equipment.This design allows the pulling tool to beused with most conventional workoverrigs and small workstrings. The pullingtool may be used to pull liners, retriev-able packers, or any other objects thatrequire heavy pulling strains.

The pulling tool is composed of threesections:• The relief valve section , which is run

on top of the tool. The relief valvesection assures the ability to releasethe slips and the pull load whether ornot differential pressure exist at thetool.

• The anchor section , which is runimmediatley below the relief valve,anchors the tool to the casing wall.The anchor section provides a large

SPECIFICATION GUIDE

Casing Range (In.) 5 5-1/2 - 6-5/8 7 - 7-5/8 8-5/8 - 9-5/8(mm) 127 139,7 - 168,3 177,8 - 193,7 219,1 - 244,5

OD of Pulling Tool (In.) 4 4-1/2 5-1/2 7(mm) 101,6 114,3 139,7 177,8

Pulling Ratio (psi) 35:1 47:1 65:1 106:1(bar) 1:35 1:47 1:65 1:106

slip engagement area to safely trans-mit the heavy pulling strains with mini-mum risk to the casing.

• The pulling section is run below theanchor section. A blanking sub is runbelow the pulling section so that hy-draulic pressure may be applied. Thepulling section will produce pullingforces ranging from 35 lbs of pull per 1psi with the 4" tool to 106 lbs of pull per1 psi with the 7" tool.

The pulling tool may be used withmechanical fishing tools, such as anovershot or screw-in assembly.

FEATURES/BENEFITS• Will operate off rig pumps or reversing

unit• May be used with small workstring• May be used with low weight capacity

workover rig• May be used with any mechanical

fishing tool

Wilson Hydraulic Pulling ToolProduct No. 140-27

68

FISHING SERVICES

HYDRAULICREVERSING TOOLProduct No. 141-10The Hydraulic Reversing Tool is a hy-draulically operated backoff tool that isused to apply break-out torque and tounscrew lengths of drillpipe, tubing, anddrill collars that have become stuck.

The reversing tool is made up to thetop of a typical left-hand fishing string(i.e. a left-hand box tap, taper tap, orovershot; a left-hand J-joint, and one ormore joints of left-hand drillpipe). A 5 ftpup joint, bumper, and oil jars, 4-6 drillcollars, crossovers, and the workstringare then added above the anchor sec-tion. (Note: All connections above theanchor section are right-hand.)

The tools are tripped in the well andthe fish is engaged. Anchor slips are setwith pump pressure, then bled off, andthe collar weight is lowered onto theanchor section. Next, the tool is pres-sured up to make backoff. The reversingtool is cycled until the connection is com-pletely backed out. The pump is turnedoff and the workstring is picked up. This

SPECIFICATION GUIDE

OD (In.) 4-1/2 5-5/8 8(mm) 114,3 142,9 203,2

Top Connection 3-1/2 API Reg 3-1/2 API IF 6-5/8 API Reg

Casing Size and (In. / lb/ft) 5-1/2 / 14-23 7 / 17 - 38 9-5/8 / 32 - 53.5 11-3/4 42-607-5/8 / 24 - 47.1 10-3/4 / 32.75-65.7 13-3/8 48-72

(mm / kg/m) 139,7 / 20,8 - 34,2 177,8 / 25,3 - 56,5 244,5 / 47,6 - 79,5 298,5 / 62,4 - 89,2193,7 / 35,7 -70 273,1 / 48,7 - 97,4 339,7 / 71,3 - 107

Torque Output (ft/lb) 15,000 25,000 50,000(N/m) 11111 18518 37037

Hydraulic Reversing ToolProduct No. 141-10

releases the slips in the anchor sectionand allows the fish to be tripped out of thehole. With minor modifications, the Hy-draulic Reversing Tool has been usedfor downhole casing make up.

FEATURES/BENEFITS• Used for both cased hole and open

hole fishing operations• Easily adaptable to directional wells;

hydraulic operation requires no rotaryaction after engaging the fish

• All torque transmitted from the anchorsection directly to the fish; workstringdoes not transmit any backoff torqueto the fish

• Backoff in cased hole requires no spe-cial strings of left-hand, heavy-wall, orhigh-strength tool joints

• Rugged construction for dependabledownhole performance

• Body parts constructed of AISI 4140heat-treated alloy steel engagementto the casing ID

69

FISHING SERVICES

DRILLING SAFETY JOINTProduct No. 150-25The Drilling Safety Joint is designed to provide a means of disconnecting from thebottom hole assembly or an unreleasable engaging tool without the use of wireline ora manual backoff. The drilling safety joint is a simple effective design whichincorporates three main components: the mandrel, bottom sub, and friction ring. Left-hand rotation will back the mandrel out of the bottom sub. Due to the friction ring, thebreak-out torque will be approximately 25% of the makeup torque.

The Drilling Safety Joint may be ordered with left-hand connections. Drilling SafetyJoints also have been manufactured from non-magnetic materials, to be run abovean MWD tool.

Drilling Safety JointProduct No. 150-25

Connection 1-1/4 Reg 1-1/2 MT 1-13/16 FJ 2-3/8 FJ 2-3/8 EUE 2-3/8 Reg

OD of Tool (In.) 2-3/16 2 1-13/16 2-1/2 3-1/16 3-1/8(mm) 55,56 50,80 46,04 63,50 77,79 79,38

ID of Tool (In.) 5/8 1-5/16 5/8 1 2 1(mm) 15,88 33,34 15,88 25,40 50,80 25,40

Connection 2-3/8 API IF 2-7/8 EUE 2-7/8 API Reg 2-7/8 API IF 3-1/2 API Reg 3-1/2 EUE

OD of Tool (In.) 3-5/8 3-21/32 3-3/4 4-3/25 4-1/2 4-1/2(mm) 92,08 92,87 95,25 104,65 114,30 114,30

ID of Tool (In.) 1-1/4 2-7/16 1-1/4 2-1/8 1-1/2 3(mm) 31,75 61,91 31,75 53,98 38,10 76,20

Connection 3-1/2 API FH 3-1/2 API IF 4 API FH 4-1/2 XH 4-1/2 API FH 4-1/2 API IF

OD of Tool (In.) 4-5/8 4-3/4 5-1/4 6 5-3/4 6-3/8(mm) 117,48 120,65 133,35 152,40 146,05 161,93

ID of Tool (In.) 2-7/16 2-11/16 2-13/16 3-1/4 3 3-3/4(mm) 61,91 68,26 71,44 82,55 76,20 95,25

Connection 4-1/2 API IF 5-1/2 API Reg 6-5/8 API Reg 7-5/8 API Reg — —

OD of Tool (In.) 6-1/2 6-3/4 8 9 — —(mm) 165,10 171,45 203,20 228,60

ID of Tool (In.) 3-3/4 2-3/4 3-1/2 4 — —(mm) 95,25 69,85 88,90 101,60

SPECIFICATION GUIDE

70

FISHING SERVICES

BOX TAP SPECIFICATION GUIDE

BOX TAP AND TAPER TAPProduct Nos. 110-99 & 121-00Box Taps are used to engage the outsidediameter of a fish, usually in situationswhere conventional releasing overshotswould not be a feasible option. They aredesigned to tap threads into the steel sothat the fish can be retrieved or thefishing job can be continued.

Taper Taps are used to engage theinside of a fish where conventional re-leasing spears would not be feasible.Like the Box Tap, it is designed to cutthreads where no threads are present.

Standard taps are machined fromhigh quality heat-treated steel with but-tress-type threads that are carburizedfor high surface hardness and good corestrength. They can be ordered with right-hand or left-hand wickers. The normaltaper is 3/4" per foot which is the mosteffective for fishing applications. Stan-dard box taps are made with an integralguide on the lower end to ensure properengagement with the fish even when it isnot centralized in the hole.

Box and Taper Taps are available ina wide variety of sizes and connections.

Connection 3/4 Sucker 1-13/16 2-3/8 2-3/8 2-3/8 2-7/8 3-1/2 4-1/2 4-1/2 6-5/8Rod FJ WFJ API Reg API IF API IF API IF API FH API IF API Reg

Tool OD (In.) 1-1/2 1-13/16 2-9/16 3-1/8 3-5/8 4-3/16 4-3/4 5-3/4 6-1/2 8(mm) 38,1 46,0 65,1 79,4 92,1 106,4 120,7 146,1 165,1 203,2

ID at first wicker (In.) 7/8 1-11/32 2-1/8 2-5/8 3-1/8 3-11/16 4-1/4 5-1/8 5-7/8 7-3/8(mm) 22,2 34,1 54,0 66,7 79,4 93,7 108,0 130,2 149,2 187,3

TAPER TAP SPECIFICATION GUIDE

Connection 1 AM 1-1/4 2-3/8 2-3/8 2-3/8 2-7/8 3-1/2 3-1/2 4-1/2 6-5/8MT FJ FJ API Reg API IF API IF API IF API FH API IF API Reg

Tool OD (In.) 1,60 2-1/4 2-1/2 3-1/8 3-3/8 4-1/8 4-3/4 3-5/8 6-1/2 8(mm) 40,6 57,2 63,5 79,4 85,7 104,8 120,7 92,1 165,1 203,2

OD at first wicker (In.) 3/4 1/2 1/2 1 1-1/2 1-7/8 1-1/2 1-1/2 2-1/4 3(mm) 14,3 12,7 12,7 12,7 38,1 47,6 38,1 38,1 57,2 76,2

Taper TapProduct No. 121-00

Box TapProduct No. 110-99

On request box taps can be manufac-tured with as little as .84/1 ratio of fish ODto tap OD.

Taps can be used to fish tubulars,bridge plugs, packers, or other types ofdownhole equipment where conventionalspears and overshots cannot be used.(Caution: Taps are unreleasable andshould only be used when releasing en-gagement type tool is not an option.)Taps should always be run with a safetyjoint and bumper jar.

FEATURES/BENEFITS• Manufactured from high-quality heat-

treated steels• Buttress-type threads are carburized

for high-surface hardness and propercare strength

• Available with right-handed or left-handed wickers and connections

• Thread profile can be ordered in astraight or fluted design

• Various sizes, lengths, and connec-tions are available on request to handlespecific types of external profiles

71

FISHING SERVICES

PIN TAPProduct No. 121-01Pin Taps are used to engage a tool joint connection that has been splitor flared or when conventional releasing type tools have failed. It is alsoused to engage a tool joint for a backoff. The threaded section of the PinTap is longer than the API pin dimension for the given thread.

Pin Taps are machined from high quality heat-treated steel with tooljoint type threads that are carburized for high surface hardness andgood core strength. They can be ordered with right-hand or left-handtaping threads. Pin Taps are available for most API drillpipe connec-tions and have the recommended API OD and ID of the tool joint.

FEATURES/BENEFITS• Will make up in damaged threads• Full bore for wireline• Carburized wickers• Manufactured from AISI 4140 heat-treated alloy steel

HOLLOW PIN TAPProduct No. 121-01The Hollow Pin Tap is designed for a very specific operation. When ajoint of washpipe has twisted off with a fish sticking out of the top, aHollow Pin Tap is usually the only solution. The Hollow Pin Taps aremanufactured with any connections. The taps have the same ID as thewashpipe connection. This allows washpipe that has twisted off over themaximum washover size to be engaged.

Hollow Pin Taps are machined from high quality heat-treated steelwith the wickers carburized for high surface hardness and good corestrength. They can be ordered with right-hand or left-hand wickers.

FEATURES/BENEFITS• Available in all washpipe connections• Carburized wickers• Manufactured from AISI 4140 heat-treated alloy steel

Hollow Pin TapProduct No. 121-01

Pin TapProduct No. 121-01

72

FISHING SERVICES

LOCKING PIN SUBProduct No. 120-60The Locking Pin Sub is designed to replacethe standard screw-in sub when a backoff ofstuck pipe or tubing is necessary.

The Locking Pin Sub is made up tothe bottom of the workstring or fishingassembly and is designed to screw intothe fish. After tagging the downhole boxof the fish, the Locking Pin Sub is madeup into it. From this point, the Locking PinSub cannot be backed off downhole.Normal jarring or backoff operations canbe carried out. The recovered fish isthen pulled out of the hole.

To remove the pin sub from the fish,slips are set beneath the first tool jointunder the sub and all subs and collarsabove it are removed. The pin sub isthen released from the fish using a re-leasing tool inserted through the box ID.

Backoff SwivelProduct No. 162-01

Locking Pin SubProduct No. 120-60

Size OD (In.) 11-1/2 11-1/2 12-3/8 (mm) 292,1 292,1 314,3

Connection 2-7/8 API IF 3-1/2 API IF 4-1/2 API IFID (In.) 2-1/8 2-11/16 3

(mm) 54 68,2 76,2Maximum Load (lbs) 300,000 400,000 400,000

(kg) 135900 181200 181200Working Pressure (psi) 10,000 10,000 10,000

(bar) 689 689 689Bearing Load Static (lbs) 490,000 490,000 540,000

(kg) 221970 221970 244620Bearing Load Dynamic (lbs) 190,000 190,000 209,000(Rated at 33-1/3 RPMs) (kg) 86070 86070 94677

BACKOFF SWIVELProduct No. 162-01The Backoff Swivel allows squeeze andtest tools to be opened or closed whilethe pipe is suspended in the elevators,without rotation of the hook. It is usedmost commonly during wireline backoffto prevent the elevators from turningwhile torque is applied to pipe to checkfree point and make the backoff.

The Backoff Swivel can also be usedas a production test swivel.

The Backoff Swivel is installed on topof the drillpipe or tubing string, above therig floor and used while rotating or recip-rocating pipe.

FEATURES/BENEFITS• Used in conjunction with a ball safety

valve, pump-in sub, lubricator joint,and wireline pack-off to permit circula-tion, rotation and pulling, and main-tains complete well control

• Constructed from AISI 4140 heat-treated alloy steel

• High-strength roller thrust bearing per-mits heavy-duty use

• Protected grease fittings provideproper lubrication to bearings and seals

• Special seals maintain internal pres-sure capacity.

FEATURES/BENEFITS• Reduces risk of premature back-out of

screw-in point while performing adeeper backoff

• Simple three-piece construction consistsof the sub, pin collar, and retainer ring

• Provides easy release from recoveredpipe once tools are out of the hole

• Standard API right-hand box up andpin-down connections eliminate cross-over sub and allow the Locking PinSub to be screwed directly into fishfrom the workstring

• Normal right-hand rotation makes upsplit pin into the downhole box

• Unique eccentric cam on pin providesimmediate lockup of the connectionwhen left-hand rotation is applied

• Available in standard API regular andIF threaded connections

BACKOFF SWIVELPRODUCT NO. 162-01

SPECIFICATION GUIDE

73

FISHING SERVICES

Marine SwivelProduct No. 170-01

Space-Out SubProduct No. 170-70

MARINE SWIVELProduct No. 170-01The Marine Swivel is used exclusivelyon floating rigs to suspend a cuttingstring in a fixed vertical position. To ac-complish this, the swivel must land on afixed point in the riser blow-out preventersor wellhead. For cutting larger casingstrings, after the riser has been removed,the marine swivel comes equipped withadapter rings from 16-3/8" OD to 30" OD.

To operate effectively and if weatherconditions permit, a slack joint may berun above the cutter to reduce thedrillstring flexure resulting in an unevencut. A space-out assembly is run belowthe swivel so the cutter is positioned atthe desired cutting depth.

RING TYPE SPACE-OUTSUB ASSEMBLYProduct No. 170-70The Ring Type Space-Out Sub Assem-bly consists of 1", 2", and 3" spacer rings;and 8" and 12" shoulder-to-shoulderlength subs. Consequently, the totallength may vary from full length to minus26". The space-out assembly is neces-sary when knife changes are required tocomplete a cutting operation utilizing amarine swivel.

Space-out is also possible through aseries of space-out subs. These are subsof varying shoulder-to-shoulder lengths.

FEATURES/BENEFITS• Simple design and operation• Allows pin-point accuracy for the

repositioning of a cutter

MARINE SWIVELPRODUCT NO. 170-01

SPECIFICATION GUIDESwivel OD (In.) 13-3/8 14-3/8 14-3/8Size (mm) 339,7 365,1 365,1

Adapter Sizes (In.) 18 16-3/8 16-3/8(mm) 457,2 415,9 415,9(In.) 27 x 17-1/2 18 18(mm) 685,8 x 444,5 457,2 457,2(In.) 27 x 20-1/4 18-1/2 18-1/2(mm) 685,8 x 514,35 469,9 469,9(In.) – 19-1/8 19-1/8(mm) 485,8 485,8(In.) – 28 28(mm) 711,2 711,2(In.) – 27 x 16 27 x 16(mm) 685,8 x 406,4 685,8 x 406,4(In.) – 27 x 17-1/2 27 x 17-1/2(mm) 685,8 x 444,5 685,8 x 444,5(In.) – 27 x 20-1/4 27 x 20-1/4(mm) 685,8 x 514,35 685,8 x 514,35(In.) – 29 x 25 29 x 25(mm) 736,6 x 635,0 736,6 x 635,0

Tool Joint Connection 4-1/2 API IF 4-1/2 API IF 6-5/8 API Reg

SPACE OUT SUBPRODUCT NO. 170-70

SPECIFICATION GUIDECutter OD (In.) 5-1/2 5-3/4 8-1/4 8-1/4 11-3/4Size (mm) 139,7 146,1 209,6 209,6 298,5

Space Out (In.) 4-3/4 4-3/4 7-3/4 7-3/4 7-3/4Assembly OD (mm) 120,7 120,7 196,9 196,9 196,9

Tool Joint 3-1/2 3-1/2 4-1/2 6-5/8 6-5/8Connection API Reg API IF API IF API Reg API Reg

74

FISHING SERVICES

Hydraulic StabilizerProduct No. 172-30

HYDRAULIC STABILIZERProduct No. 172-30The Hydraulic Non-Rotating Stabilizer isrun above a cutting assembly for maxi-mum stabilization when cutting casing ordrillpipe.

The Hydraulic Stabilizer is run abovethe cutter. Once at the location of the cut,rotation begins and pump pressure isapplied to operate the cutter. Hydraulicpressure will actuate the piston expand-ing the stabilizer arms and forcing thestabilizer pads against the ID of the cas-ing. The hydraulic pressure required torun the tool is less than the hydraulicforce required to operate most hydrauliccutters; therefore, the stabilizer engagesthe casing wall prior to any cutting. Thestabilizer arms and pads remain station-ary while the cutter is rotating. When thecut is complete, the stabilizer collapseswhen pump pressure is stopped.

FEATURES/BENEFITS• Design allows workstring to centralize

when cutting multiple string, casing, ordrive pipe

• Heavy-duty ball-thrust bearings allowsmooth rotation of mandrel throughstabilizer arm assembly during diffi-cult cuts

• Stabilizer pads remain stationary dur-ing cutter rotation

• Mandrel and body parts stationaryduring cutter rotation

• No body connections to make up onrig floor

• Skid mounted for easy handling• Requires less than 100 psi to activate• Can be run through ID restrictions and

set in larger ID• Can be run with any pressure-acti-

vated tool

SPECIFICATION GUIDE

Casing (In.) 7-5/8 - 9-5/8 18-5/8 - 36 30 - 60(mm) 193,7 - 244,5 473,1 - 914,4 762 - 1524

Connections 4-1/2 API Reg 6-5/8 API Reg 6-5/8 API Reg

Collapsed OD (In.) 6-1/2 15-1/2 24 - 34(mm) 165,1 393,7 609,6 - 863,6

75

FISHING SERVICES

SLEEVE TYPE NON-ROTATING STABILIZERProduct No. 171-30The Sleeve Type Non-Rotating Stabi-lizer provides maximum centralizationand ensures smooth and efficient rota-tion in cutting, milling, and fishing opera-tions. The sleeve stabilizer is a three-piece design consisting of a mandrel,sleeve, and bottom sub. The sleeve sta-bilizer is run directly above the milling orfishing assembly. When cutting, it is bestto have a stabilizer above and below thecutter.

FEATURES/BENEFITS• Provides maximum control for cutting

and milling operations• Non-rotating sleeve reduces vibration

during cutting and milling operations• Non-rotating sleeve minimizes casing

wear• Mandrel and bottom-sub manufactured

from AISI 4140 heat-treated alloy steel• Sleeves manufactured from mild steel

to minimize casing wear• Mild steel construction allows sleeves

to be easily modified to different sizes

VARIABLE BLADESTABILIZERProduct No. 170-30The Variable Blade or Replaceable BladeStabilizers are designed to run abovemulti-string cutters in larger casing sizeswithout restrictions. The Variable BladeStabilizer reduces the amount of toolsrequired for an abandonment. Eachblade can be easily changed by remov-ing two locking pins and lifting the bladeup and out. The Variable Blade Stabi-lizer can be dressed to stabilize in 16" to48" casing. It comes equipped with fivereplaceable blades per casing size. Theblades are manufactured from mild steelto minimize on interior casing damage incasing repair operations. The body is asingle unit manufactured from 4140 heat-treated alloy steel.

FEATURES/BENEFITS• Reduces equipment required for

abandonment• Easily converted to different

casing sizes• Economically modified for special

ID casing

SLEEVE TYPE NON-ROTATING STABILIZERPRODUCT NO.171-30

SPECIFICATION GUIDEBody OD (In.) 3-1/8 3-3/4 4-1/4 4-3/4 6-1/2 7-3/4

(mm) 79,4 95,3 108,0 120,7 165,1 196,9

Minimum Casing ID (In.) 4.00 4.89 5.68 6.00 8.54 9.56(mm) 101,6 124,3 144,1 152,5 216,8 242,8

Connection 2-3/8 2-7/8 3-1/2 3-1/2 4-1/2 6-5/8API Reg API Reg API Reg API IF API IF API Reg

VARIABLE BLADE STABILIZERPRODUCT NO. 170-30

SPECIFICATION GUIDE

Stabilizers available with 4-1/2 API IF and 6-5/8 API Regular.Variable Blade Stabilizer

Product No. 170-30

Sleeve Type Non-Rotating StabilizerProduct No. 171-30

Body OD (In.) 14-3/4(mm) 374,7

Casing Size (In.) 16 18 5/8 20 20 24 30 36 48(mm) 406,4 473,1 508,0 508,0 609,6 762,0 914,4 1219,2

Blade Size (In.) 3-1/2 4-3/4 4-7/8 5-1/8 6-7/8 9-1/8 13 18-7/8(mm) 88,9 120,6 123,8 130,2 174,6 231,8 330,2 479,4

76

FISHING SERVICES

CIRCULATIONCONTROL JOINTProduct No. 140-24Circulation Control Joints provide emer-gency circulation at a predeterminedhydraulic pressure. The tool consists ofa sub with a hole drilled through on theside and then counter bored. It is thenthreaded to hold a rupture disc with acontrol washer on either side.

The Circulation Control Joint may beused in several ways: as a running-in orseating sub used with a washout tool, orto catch a light-weight fish with an over-shot fitted with a pack-off. A pressureincrease will indicate capture of a light-weight fish which may not show up in theindicator. Once the fish is secured, theoperator can pressure up to burst therupture disc and pull a dry string.

The tool may also be run with therupture disc removed and the restrictionplug equipped with a short fishing neckto serve as a kick sub that aids in engag-ing the fish.

As a running-in tool, the CirculationControl Joint is run above large diametertools as they go in the hole to relievebottomhole pressure. For this purpose,the rupture disc is omitted and once nearthe fish, a restriction plug with a longfishing neck is used to reseal the sidehole.

When used as a washout tool, theCirculation Control Joint is run above ascrew-in sub, and the side hole acts asan exhaust vent.

Size OD

(In.) (mm) Connection

4-1/8 104,8 2-7/8 API IF4-3/4 120,7 3-1/2 API IF4-5/8 117,5 3-1/2 API FH5-1/4 133,4 4 API FH5-1/2 139,7 4-1/2 API Reg5-3/4 146,1 4-1/2 API FH

6 152,4 4-1/2 X-Hole6-3/8 161,9 4-1/2 API IF6-3/4 171,5 5-1/2 API Reg

8 203,2 6-5/8 API Reg

SPECIFICATION GUIDE

SPECIFICATION GUIDE Control Rupture Disc Thickness Washer ID In. mm In. mm In. mm In. mm

In. mm .005 0,13 .010 0,25 .015 0,38 .020 0,050 Shear Value

psi bar psi bar psi bar psi bar1/2 12,7 1500 103 2750 190 4100 283 — —

9/16 14,3 1450 100 2450 169 — — — —5/8 15,9 1100 75 2150 148 3250 224 — —

11/16 17,5 1000 69 1950 134 — — 4900 3383/4 19,1 950 66 1650 114 2700 186 4800 331

13/16 20,6 900 62 1550 107 — — 3950 2727/8 22,2 800 55 1450 100 2300 159 3500 241

15/16 23,8 750 52 1350 93 — — — —1 25,4 650 45 1250 86 — — — —

Circulation Control JointProduct No. 140-24

FEATURES/BENEFITS• Provides a circulation point if a plugged

fish is engaged• Eliminates pulling wet string• Provides positive indicator of engaged

fish• Can be used as a drain sub or kick sub• Rupture disc hole can be resealed

without pulling workstring out of thehole

• Maintains the same rupture pressurefrom either side of the rupture disc

• Constructed of AISI 4140 heat-treatedalloy steel

• Minimum ID is large enough to runfree-point and backoff

77

FISHING SERVICES

PUMP-OUT SUBProduct No. 140-61The Pump-Out Sub is designed to allowcirculation above a plugged fish to avoidpulling a wet string and for well controlpurposes. The simple design consists ofthe main body, sleeve, and shear pin.Once a fish has been engaged and it isestablished that circulation is not pos-sible through the fish, a ball is pumpeddown the drillstring to the sleeve. Addi-tional pump pressure shears the shearpin allowing the sleeve to shift. Thisallows circulation through the side ports.

SPECIFICATION GUIDE

Connection 2-3/8 EUE 2-3/8 API Reg 2-3/8 API IF 2-7/8 API Reg 3-1/2 API Reg

Tool OD (In.) 3-1/16 3-1/8 3-3/8 3-3/4 4-1/4(mm) 77,8 79,4 85,7 95,3 108,0

Tool ID (In.) 1-1/8 3/4 1-1/8 3/4 1-1/8(mm) 28,6 19,1 28,6 19,1 28,6

Ball OD (In.) 1-1/4 7/8 1-1/4 7/8 1-1/4(mm) 31,8 22,2 31,8 22,2 31,8

Connection 3-1/2 API IF 4-1/2 API Reg 4-1/2 API FH 4-1/2 API IF 6-5/8 API Reg

Tool OD (In.) 4-3/4 5-3/4 5-3/4 6-1/2 8(mm) 120,7 146,1 146,1 165,1 203,2

Tool ID (In.) 1-3/4 1-3/4 1-3/4 2 2-3/8(mm) 44,5 44,5 44,5 50,8 60,3

Ball OD (In.) 2 2 2 2-1/4 2-5/8(mm) 50,8 50,8 50,8 57,2 66,7

Pump-Out SubProduct No. 140-61

The Pump-Out Sub may also be usedwith a mud motor when extended circu-lating times are foreseen after the motoroperations are complete.

FEATURES/BENEFITS• Balanced piston will not open prema-

turely• Allows full flow• Prevents mud loss through pulling of

wet strings• Simple design and operation

78

FISHING SERVICES

RESONANCE TOOLProduct No. 140-52The Resonance Tool is designed to freestuck tubulars downhole. All tubularsexhibit resonant frequencies that are afunction of the free length. The Reso-nance Tool applies sonic energy to thestuck point through the workstring whichfrees stuck tubulars.

The Resonance Tool is a portabletool consisting of four main parts: oscil-lator, 425 HP hydraulic power pack, hy-draulic hose, and control panel. Theseparts are packed as two compact unitswhich weigh 15,000 lbs (6818 kg). In thefield, the unit can be operational in ashort period of time. The hydraulic powerunit is equipped with spark arrestingmuffler, emergency air intake shut-down,insulated exhaust, and full containmentdrip pan.

The tool allows for remote controloperation. It is equipped for variablehook-load capacity which is field adjust-able to suit variable load conditions up to120,000 lbs (54545 kg). The control panelis also portable to allow for use from anyvantage point.

FEATURES/BENEFITS• Frees stuck tubulars such as open

hole liners, gravel pack screens, me-chanical or differentially stuck pipe

• Improves cement bond and eliminateschannels

• Gravel pack compression eliminatesvoids and has superior pack density

• Low stress operation reduces stresson the workstring

• No downhole equipment required otherthan a means of engagement

Resonance ToolProduct No. 140-52

79

FISHING SERVICES

GEOTHERMAL VALVE CHANGER SYSTEMProduct No. 200-79The Geothermal Valve Changer System is used to change wellheadsor wellhead valves quickly and easily. This package consists of apacker, a hydraulic lubricator assembly, and power unit. The com-plete package contains all necessary hoses, fittings, flanges, etc., tocompletely service the wellhead of a geothermal well. A customerfurnished lifting crane to lift the packer and lubricator onto thewellhead is required.

The Geothermal Packer is mechanically set below the wellheadby utilizing the hydraulic lubricator and power unit. It is set in thecasing bore to stop all flow of steam, allowing the existing wellheadto be replaced or repaired, or to cut out a length of bad casing underthe wellhead and lower it.

With the packer inside the lubricator, the lubricator is attached tothe wellhead valve. Steam is released gradually into the lubricatoruntil it reaches wellhead pressure and is equalized. The lubricatorthen hydraulically lowers the packer into the casing below thewellhead. The packer is then set mechanically by the hydraulic motoron the lubricator. Once the packer is set, the lubricator is releasedfrom the packer and removed from the wellhead. The wellhead valveor wellhead can then be removed and changed. After the repairshave been made, the lubricators are once again made up to thewellhead, reconnected to the packer, and the packer is mechanicallyreleased by the hydraulic motor on the lubricator. It is then retrievedback into the lubricator. The new valve is closed and the pressure isbled off the lubricator.

FEATURES/BENEFITS• Constructed to withstand the highly corrosive gas and steam found

in geothermal wells• Packer has been tested 24 hours at 3,000 psi (207 bar) and 500°F

with no leaks• Eliminates the need to move a rig on location to insert a plug or kill

the well with fluid• Valve changer has packer, snubbing unit, and lubricator in one

package• Wells are normally back in production on the same day• Capable of running a casing scraper prior to running packer• Capable of milling stuck gate valves• Closed loop hydraulic system controls running, setting, releasing,

and retrieving of packer• Customer furnished equipment is held to a minimum on a normal

valve change operation

Geothermal Valve ChangerProduct No. 200-79

80

FISHING SERVICES

Casing Jack SystemProduct No. 185-56

CASING JACK SYSTEMProduct No. 185-56Casing Jack Systems are used to apply heavy pulling loadsto casing or other large tubulars. They are particularly usefulwhen the rig cannot handle the loads required to pull thestring or perform the assigned job.

On abandonment jobs, Casing Jacks can help free stuckcasing and pull enough pipe to lower the string weightallowing the rig to finish pulling the casing out of hole. Onjobs where casing is rehung in the wellhead, Casing Jacksprovide pull necessary to reset the casing hanger at theoriginal tension at which the casing was run, regardless ofthe type of rig on the well.

After the jack system is set up and the manifold con-nected, a casing spear and drillpipe pup joint are made upand inserted into the top of the casing. After which, the spearis set with enough of the pup joint sticking up to set the topset of the slips. With upper and lower slips in place, the jacksare slowly cycled and the casing picked up in the wellhead.Once the casing hanger is high enough above the bottom-slip area, the bottom slips are set and the casing hangerremoved.

For rehanging jobs, the casing hanger is replaced andthe jacks removed once the decided tension is applied. Forabandonment jobs, jacking continues until the casing is freeenough for the rig to pull.

In cases which do not permit the use of the jacking spool,two wide flange beams to support and stabilize the jacks maybe used.

FEATURES/BENEFITS• Combined lifting ratio of 100 to 1 means casing jack

requires only medium pressure to operate• 6000 psi (413,79 bar) lift capacity translates to 600,000 lbs

(272727 kg) of total lift• Accepts API casing-handling equipment• Pulls against top of wellhead flange instead of the rig

derrick or substructure• High-pressure power unit operates a closed hydraulic

system so casing jack does not require a pump truck orlease water

SPECIFICATION GUIDE

Casing Jack - 9-3/4” OD / 248 mm

Jacking Plate

350 Ton / 317100 kg Stripping Bowl

Jacking Spool(Integral 11" / 279 - 300# Flange and Bowl)

81

FISHING SERVICES

KELLY DRIVE BUSHING,TRAHAN COLLAPSIBLE DRIVE BUSHING,AND PIPE DRIVE BUSHINGProduct Nos. 183-56, 154-64 & 182-56

The Kelly Drive Bushing, the Trahan Collapsible Drive Bushing, and the Pipe Drive Bushing are designed to allowan operator to utilize the rotary without using the kelly or the slips. This ability can be extremely useful in any operationwhere engaging or getting over the top of the fish may be difficult. The Pipe Drive Bushing and the Trahan CollapsibleDrive Bushing can be used when a shear type spear has engaged the fish before the kelly has been picked up.

The Kelly Drive Bushing is a pup joint with a hex shaped middle body section 10 ft (3,04 m) long. A split bushingwhich will fit pin drive or square drive rotary tables is set around the body for transmitting torque. The Kelly DriveBushing is spaced out in the string so the engaging tool or washover assembly will be at the top of the fish when thebody of the bushing is in the rotary table. The bushing is then installed. Once the top of the fish has been engagedor swallowed by a washover assembly, the bushings are removed and the Kelly Pup Joint is left in the string duringthe fishing or washing over operation.

The Trahan Collapsible and the Pipe Drive Bushing both utilize a slip carrying insert which attaches to theworkstring. The inner body of the Pipe Drive Bushing is machined so that the insert may pass freely up and down thelength of the bushing. The Trahan Bushing utilizes a telescoping design which holds the insert firmly. Both can be usedwith pin or square drive rotary tables. Great care should be taken when attaching the inserts, if the inserts spin on thepipe the workstring may be damaged.

82

FISHING SERVICES

THRU-TUBING FISHING SERVICESDuring the evolution of coiled tubing fishing, Baker OilTools quickly realized the need to move from modifiedwireline tools to a new generation of hydraulic actuatedtools. This is one prime example of the leadership we haveinitiated.

Thru-Tubing Service is the process of workover orcompletion of an existing wellbore without either pulling theproduction string or killing the well; technology that en-hances the reservoir’s potential by reducing fluid damageto the wellbore; and, reduces cost to the operator byeliminating/reducing rig and fluid cost. Thru-Tubing Fish-ing incorporates several technologies that may be appliedwholly or separately. Current participation from Baker OilTools has made us the leader and innovator from thefishing aspect. The use of our METAL MUNCHER ®

Technology has greatly enhanced the milling capabilitieswith a thru-tubing string. We are rapidly expanding ourmotor applications due to enhanced capabilities with Inteq’smotor technology, exceeding other motor providers’ capa-bilities in the market place.

Tubing sizes range from 2-3/8" to 7". Thus, the size oftools offered are selected for operational compatibilitywithin the range of tubing sizes suggested.

83

FISHING SERVICES

THRU-TUBING FISHINGSERVICES

Thru-Tubing Service is the process ofworking over or completing an existingwellbore without pulling the productionstring or killing the well. Performed bycoiled tubing or snubbing units, thru-tubing operations can enhance areservoir’s potential by reducing fluiddamage to the wellbore; and can reducecost to the operator by eliminating orreducing rig and fluid costs.

Baker Oil Tools’ Thru-Tubing FishingServices group serves this specializedsegment of the industry with the samefocus and expertise that Baker Oil ToolsFishing Services brings to conventionaldrilling and workover operations. As aresult of long-term, on-going develop-ment efforts, Baker Oil Tools offers themost advanced line of thru-tubing toolsavailable today.

GROWTH OF AN INDUSTRYPeriodically, an industry segment expe-riences significant technological “leaps”which in turn, cause significant growth ofthe industry itself. This clearly is the casewith coiled tubing, which started a leapforward in the late 80s that shows no signyet of having reached an apex. As themetallurgy of the coiled tubing improved,proposed coiled tubing applications grewmore numerous and more challenging.And as in any industry, the greater thenumber of applications, the greater theneed for specialization.

The trend toward horizontal drillingprovided much of the driving force be-hind advances in coiled tubing technol-ogy and the related growth of that indus-try segment. The horizontal wellbore pre-cluded use of conventional wireline toolsand technology; work previously per-formed by one man with a slickline unitnow required coiled tubing to force toolsdown the production tubing. This use ofcoiled tubing for what previously was

slickline work may have been the impe-tus for development of the first genera-tion thru-tubing fishing tools.

Based on time-tested slickline-con-veyed fishing tools designed to operateby reciprocation, this first generation ofcoiled tubing tools worked as designed;however, the need for non-reciprocatedtools to reduce coiled tubing cycles at theinjector head quickly became apparent.

‘NEXT GENERATION’THRU-TUBING TECHNOLOGYCommitted to becoming the leading pro-vider of Thru-Tubing Fishing Services,Baker Oil Tools combined the resourcesof its various and extensive product linesto develop a new generation of Thru-Tubing Fishing Tools. These new, hy-draulic-actuated, flow-through externaland internal catch tools could now en-gage a fish and jar repeatedly, withoutthe additional coiled tubing cycles re-quired to engage and re-engage a recip-rocating tool.

Working with Baker Hughes Inteq,Baker Oil Tools also helped develop aline of workover motors that provide thereliability and high-torque capabilities ofthe Navidrill PDM. This combination ofNavidrill motor and METAL MUNCHER®

technologies then opened the door for alltypes of milling applications, which inturn, made further advances possible incasing exit technology. Lessons learnedabout window cutting casing exits havenow been applied to coiled tubing, re-sulting in development of Baker Oil Tools’Coiled Tubing Whipstocks and Thru-Tubing Whipstocks.

This synergy of technological devel-opment and industry expansion contin-ues to fuel Baker Oil Tools’ efforts toprovide the leading edge technology towiden and enhance the range of coiledtubing applications.

84

FISHING SERVICES

COILED TUBING CONNECTORProduct No. 132-00The Coiled Tubing Connector is the uppermost component in coiled tubing bottomhole assembly. Baker uses the slip type connector which has an energized seal toensure pressure integrity of the workstring and is rotationally locked making it wellsuited for motor applications. As the connector is assembled, the slip will be anchoredinto the OD of the coiled tubing. It is recommended to pressure test and pull test theconnector before operations are carried out.

FEATURES/BENEFITS• High tensile strength• High torsional strength for motor applications• Large ID for maximum flow rates and pump through of actuation balls• Manufactured with fishing profile on top of connector

SPECIFICATION GUIDE

Connector OD Coiled Tubing OD

In. mm In. mm

1-7/16 36,5 1 25,4

1-11/16 42,9 1 - 1-1/4 25,4 - 31,8

1-13/16 46 1 - 1-1/4 25,4 - 31,8

2-1/8 54 1 - 1-1/4 - 1-1/2 25,4 - 31,8 - 38,1

2-1/4 57,2 1-3/4 44,5

2-1/2 63,5 1-1/2 - 1-3/4 - 2 38,1 - 44,5 - 50,8

2-3/4 69,9 1-1/2 - 1-3/4 38,1 - 44,5

2-7/8 73 1-1/2 - 1-3/4 - 2 - 2-3/8 38,1 - 44,5 - 50,8 - 60,3

3 76,2 2 50,8

3-1/8 79,4 1-1/2 - 1-3/4 - 2 - 2-3/8 38,1 - 44,5 - 50,8 - 60,3

3-3/8 85,7 2-3/8 - 2-7/8 60,3

4-1/2 114,3 3-1/2 88,9

4-3/4 120,6 2-3/8 60,3

Coiled Tubing ConnectorProduct No. 132-00

85

FISHING SERVICES

SPECIFICATION GUIDE

DUAL FLAPPER BACK PRESSURE VALVEProduct No. 132-04The Dual Flapper Back Pressure Valve is run as a well control measure to preventwellbore pressure from entering the workstring. This is normally run directly below thecoiled tubing connector or at the top of the bottom hole assembly. When completelyopen, the flapper design allows the passage of actuation balls to hydraulically actuateddevices in the bottom hole assembly.

FEATURES/BENEFITS• Dual valves• Field proven bonded nitrile seats• Short length• Large ID

Tool OD Minimum ID Length Standard

In. mm In. mm In. mm Connection

1.44 36,58 0.56 14,22 22.22 564,39 3/4 Hydril CS

1.69 42,93 0.69 17,53 19.69 500,13 1 AM MT

1.81 45,97 0.69 17,53 19.69 500,13 1 AM MT

2.13 54,10 0.81 20,57 19.00 482,60 1-1/2 AM MT

2.50 63,50 0.81 20,57 19.00 482,60 1-1/2 AM MT

2.88 73,15 1.00 25,40 19.00 482,60 2-3/8 PAC DSI

3.13 79,50 1.00 25,40 18.82 478,03 2-3/8 PAC DSI

3.50 88,90 1.50 38,10 19.00 482,60 2-7/8 PAC DSI

3.75 95,25 1.00 25,40 19.00 482,60 2-7/8 Reg.

Dual Flapper Back Pressure ValveProduct No. 132-04

86

FISHING SERVICES

MODEL “FAU” ™ SAFETY HYDRAULICDISCONNECTProduct No. 132-11The “FAU” Safety Hydraulic Disconnect is specially designed forthru-tubing fishing operations, and is built to withstand high tensionaland torsional stresses encountered in jarring and motor applications.The “FAU” Safety Hydraulic Disconnect may be run anywhere in thestring as long as the actuation ball can be circulated to it. Should itbecome necessary to disconnect from the tool string, a ball iscirculated to the releasing piston, additional pump pressure willshear the screws, allow the piston to move down and the disconnectto separate. When disconnected, an internal “GS” fishing profile isleft looking up, and subsequent retrieving operations may continuewith the Hydraulic Releasing “GS” Spear (shown on page 89).

FEATURES/BENEFITS• Provides controlled method of disconnection from lower portion

of BHA• Disconnected portion has internal “GS” profile• Balanced to prevent accidental disconnect• Torsionally locked• Large ID permits circulation of smaller size actuation balls

below tool

SPECIFICATION GUIDE Tool OD Length

In. mm In. mm

1-7/16 36,50 20.43 518,92

1-11/16 42,90 17.88 454,15

1-13/16 46,00 17.88 454,15

2-1/8 54,00 20.89 530,61

2-1/4 57,20 23.25 590,55

2-7/8 73,00 26.75 679,45

3-1/8 79,40 29.67 753,62

3-1/2 88,90 29.67 753,62

SPECIFICATION GUIDE Tool OD Length

In. mm In. mm

2-1/8 53,0 25.44 646,2

Model “JD” SafetyHydraulic Disconnect

Product No. 132-12

Model “FAU” SafetyHydraulic Disconnect

Product No. 132-11

MODEL “JD” ™ SAFETY HYDRAULIC DISCONNECTProduct No. 132-12The “JD” Disconnect was designed to eliminate the risk of failure dueto shear pin fatique during down jarring applications. Much of thedesign is similar to the “FAU” Disconnect with the exception of themechanism which holds the actuation piston in place. The actuationpiston is held in place by spring loaded collet fingers which are in turnheld in place by a hydraulically actuated shifting sleeve. The sleevewhich holds the collet fingers in the catch position cannot behydraulically shifted until an actuation ball is landed in the piston.

87

FISHING SERVICES

PULL DISCONNECTProduct No. 132-14The Torque Thru Pull Disconnect utilizes Belleville washers whichoffer the ability to disconnect at a predetermined over-pull point. Thetool is rotationally locked for motor and indexing applications. Thistype of disconnect is used in applications where an actuation ballmay not be circulated down to the disconnect point, such as belowmotors or when used with e-line coiled tubing.

FEATURES/BENEFITS• External profile• No actuation ball required• No shear screws• Torque thru capabilities• Adjustable disconnect load

Size Length Size Top BottomOD ID Thread Thread

In. mm In. mm In. mm2.13 54,1 21.6 549 0.69 17,5 1-1/2" MT Box 1-1/2" MT Box

2.25 57,2 20.3 514 0.69 17,5 1-1/4" API Reg 1-1/4" API Reg

2.88 73,2 25.3 641 0.81 20,6 2-3/8" PAC DSI 2-3/8" PAC DSI

3.13 79,5 21.3 540 0.81 20,6 2-3/8" API Reg. Box 2-3/8" API Reg. Pin

3.38 85,9 21.3 540 0.81 20,6 2-3/8" API Reg. Box 2-3/8" API Reg. Pin

SPECIFICATION GUIDE

HIGH LOAD DISCONNECTProduct No. 132-13The High Load Hydraulic Disconnect design allows for greatertensile strength, resistant to shock loading and shorter in length. Thetool is rotationally locked so that it is compatible with torque gener-ating tools. The torsional strength of the tool is advantageous inunderreaming and cutting operations. The high tensile strengthallows jarring operations to be carried out with the High LoadDisconnect. The High Load Disconnect is a ball actuated tool whichutilizes hydraulic pressure for activation. This tool leaves an internal“GS” profile for subsequent retrieving operations.

FEATURES/BENEFITS• High tensile strength• Used for jarring and motor applications• Large ID• Shear screws have a predetermined value

Torque Thru Pull DisconnectProduct No. 132-14

High Load DisconnectProduct No. 132-13

88

FISHING SERVICES

Dual Actuated Circulating ValveProduct No. 132-18

DUAL ACTUATED CIRCULATING VALVEProduct No. 132-18The Dual Actuated Circulating Valve is designed to allow a circulation path above amud motor to eliminate unnecessary wear on the motor during circulation. When themotor service is complete, fluids may need to be pumped for several hours to cleanthe wellbore. The use of this valve can save unnecessary wear on the mud motorduring this operation.

The Dual Actuated Circulating Valve is ball actuated and normally is run below thehydraulic disconnect and above the downhole motor. The primary means of actuationis accomplished by pumping a ball which will shift the piston sleeve, exposingcirculation ports. The secondary means of actuation is through a rupture disc. In theunlikely event that the bottomhole assembly becomes plugged, increased pressurefrom the surface will rupture the disc and allow circulation of an actuation ball.

FEATURES/BENEFITS• Saves wear on the mud motor• Large ID permits maximum flow rates• Predetermined values on shear screws, and secondary rupture disc• Balanced piston

SPECIFICATION GUIDE

Tool OD Min ID Length Standard

In. mm In. mm In. mm Connection

1.44 36,6 0.41 10,4 16.00 406,4 3/4 Hydril CS

1.69 42,9 0.41 10,4 12.56 319,0 1 AM MT

1.81 46,0 0.41 10,4 12.56 319,0 1 AM MT

2.13 54,1 0.44 11,2 14.13 358,9 1-1/2 AM MT

2.38 60,5 0.44 11,2 15.13 384,3 1-1/4 Reg

2.50 63,5 0.44 11,2 14.38 365,3 1-1/2 AM MT

2.88 73,2 0.44 11,2 15.13 384,3 1-1/4 Reg

3.13 79,5 0.69 17,5 16.75 425,5 2-3/8 Reg

89

FISHING SERVICES

Hydraulic Releasing“GS” Spear

for Slick ID FishProduct No. 133-10

HYDRAULIC RELEASING “GS” ™ SPEARProduct No. 133-10 (For Slick ID Fish)Product No. 133-11 (For Fishing Neck)The Hydraulic Releasing “GS” Spear, specifically designed for Thru-Tubing FishingOperations, is engineered to withstand the high tensional and side load stressesencountered during jarring operations. Spears are designed to engage standard “GS”fishnecks or slick ID fishnecks. The non-rotating “GS” Spear incorporates a clutchmatching that of the FAU Hydraulic Disconnect so that torque may be transmittedthrough the tool.

A flow path is provided through the tool to allow circulation while running in the hole.Once the profile is encountered, the flow path can be used to create a jetting actionto wash debris from the profile.

To engage the profile or the slick ID of a fish, minimal set down weight is appliedwhich moves the collets into the release position allowing it to enter the fish ID. Oncethe spear has adequately entered this ID, the collets or slip will snap into the catchposition. To release from the fish or “GS” profile, increased flow rate will move thecollet or slip into the release position.

FEATURES/BENEFITS• Maximum ID catch• High tensile strength• Pump-thru capabilities• No shear screws• Minimized stress on collets or slips

Tool OD Length Catch Range

In. mm In. mm In. mm1-13/16 46 18.40 467 1.31 to 1.781 33 to 45

2-1/4 57 20.42 519 1.75 to 2.156 44 to 55

2.70 69 22.00 559 2.125 to 2.50 54 to 64

3 76 24.00 610 2.375 to 2.84 60 to 72

HYDRAULIC RELEASING “GS” ™ SPEARPRODUCT NO. 133-10 (FOR SLICK ID FISH)

SPECIFICATION GUIDE

Hydraulic Releasing“GS” Spear

for Fishing NeckProduct No. 133-11

Tool OD Length Fish Neck Type to Catch

In. mm In. mm1-7/16 37 21.88 556 1-1/2" GS1-11/16 43 18.11 460 2" GS1-13/16 46 18.11 460 2" GS2-1/8 54 20.60 523 2-1/2" GS2-1/4 57 20.35 517 2-1/2", 2-7/8" GS2.70 69 23.03 585 3" GS

3 76 23.53 598 3", 3-1/2" GS3-1/8 79 25.03 636 3" GS3-1/2 89 21.38 543 3-1/2", 4" GS4-1/2 114 25.50 648 5" GS

HYDRAULIC RELEASING “GS” ™ SPEARPRODUCT NO. 133-11 (FOR FISHING NECK)

SPECIFICATION GUIDE

90

FISHING SERVICES

HYDRAULIC RELEASING OVERSHOTProduct No. 133-30 (For Slick OD Fishing)Product No. 133-31 (For Fishing Necks)The Hydraulic Releasing Overshot has several designs: to catch anexternal “JDC” profile blanking plug; and, to catch slick OD fish suchas coiled tubing. The tool is engineered to withstand high tensional,and side loading stresses encountered during jarring operations.The overshot is engaged by applying slight setdown weight at thetool. A flow path is provided through the tool for circulation whilerunning in the hole; this path can also be used to wash debris fromthe top of the fish or profile. In the event that retrieval is not possible,increased flow rate through the tool releases it and no other tools areleft in the well.

FEATURES/BENEFITS• High strength• Can be used for jarring operations• Flow path permits washing debris from the top of the fish or profile• No shear screws• Design minimizes stress on the grapple section

Hydraulic Releasing OvershotProduct No. 133-30(For Slick OD Fish)

Hydraulic Releasing OvershotProduct No. 133-31(For Fishing Necks)

PRODUCT NO. 133-30 (FOR SLICK OD FISHING)SPECIFICATION GUIDE

Tool OD Length Catch Size

In. mm In. mm

2-1/8 54 18.38 466,8 1.13, 1.25

2-5/8 66,7 18 457,2 1.25, 1.50, 1.75

3 76,2 22.25 565,1 2.00, 2.13, 2.25

3-1/2 88,9 22.25 565,1 2.25, 2.38, 2.50

3-3/4 95,3 22.25 565,1 2.88

PRODUCT NO. 133-31 (FOR FISHING NECKS)SPECIFICATION GUIDE

Tool OD Length Slick OD Catch Size

In. mm In. mm

1-7/16 36,6 16 406,4 0.88, 1.00 JDC

1-5/8 41,3 1.19 JDC

1-13/16 46 17.75 450,8 0.88, 1.00, 1.19, 1.38 JDC

2-1/8 54 18.38 466,8 1.38 JDC

2-1/4 57,2 18.63 473,2 0.75, 1.00 1.19, 1.38, 1.75 JDC

2-5/8 66,7 18 457,2 1.19, 1.38, 1.75 JDC

3 76,2 22.25 565,1 1.19, 1.38, 1.75, 2.31 JDC

3-3/8 85,7 22.25 565,1 1.19, 1.38, 1.75, 2.31 JDC

3-1/2 88,9 22.25 565,1 1.19, 1.38, 1.75, 2.31 JDC

3-3/4 95,3 22.25 565,1 2.75 JDC

4 101,6 22 559 2.75, 3.13 JDC

91

FISHING SERVICES

Continuous OvershotProduct No. 133-32

CONTINUOUS OVERSHOTProduct No. 133-32The Continuous Overshot is designed to swallow andengage long sections of coiled or threaded flush ODtubulars. The engaging mechanism is a bulldog designwhich, once over a tube will engage any time the overshotis elevated. The grapple has a large catch range toaccommodate an egged, split or deformed tube. Theovershot utilizes finger springs that will center the tubingin the grapple reducing the risk of dulling the grapplewickers.

The Continuous Overshot may be run with washpipeor tubing to accommodate the swallowing of a largesection of tubing or run with extensions on coiled tubing.A cutlip, milling or dressing guide may be run on below theovershot.

FEATURES/BENEFITS• Wide catch range• May be run on threaded or coiled tubing• Tensile yield equal to top connection

CONTINUOUS OVERSHOTPRODUCT NO. 133-32

SPECIFICATION GUIDETool OD Standard Catch Range

In. Connection In.mm mm

1.858 1-1/4 CS Hydril 1 - 1.2547,2 25,4

2.25 1-1/2 CS Hydril 1 - 1.2557,2 25,4 - 31,7

2.63 1-1/2 CS Hydril 1 - 1 .25 - 1.566,8 25,4 - 31,7 - 38,1

3.13 2-7/8 A-95 1 - 1.25 - 1.5 - 1.75 - 2.0079,5 25,4 - 31,7 - 38,1 - 44,4

3.38 2-7/8 CS Hydril 1 - 1.25 - 1.5 - 1.75 - 2.0085,8 25,4 - 31,7 - 38,1 - 44,4

High Pressure Pack-OffProduct No. 133-33

HIGH PRESSURE PACK-OFFProduct No. 133-33The High Pressure Pack-Off is designed to be run abovemost external catch engaging devices. If a clean fish topexists, the pack-off makes it possible to circulate througha fish, once swallowed. The pack-off also makes itpossible, by pump pressure, to obtain an indication thata fish has been swallowed. The pack-off in no way inhibitsthe operation of the engaging tool.

FEATURES/BENEFITS• Allows high pressure circulation through a fish• Packing rings are pressure energized• May be manufactured with most tubing threads

92

FISHING SERVICES

OD Catch Size Connection

In. mm In. mm2.25 57,15 1.000 25,40 1-1/2 CS Hydril

2.25 57,15 1.250 31,75 1-1/2 CS Hydril

2.25 57,15 1.500 38,10 1-1/2 CS Hydril

2.25 57,15 1.750 44,45 1-1/2 CS Hydril

2.625 66,68 1.000 25,40 1-1/2 CS Hydril

2.625 66,68 1.250 31,75 1-1/2 CS Hydril

2.625 66,68 1.500 38,10 1-1/2 CS Hydril

3.125 79,38 1.500 38,10 2-3/8 5.95# Hydril PH6

3.375 85,73 1.000 25,40 2-7/8 A-95

3.375 85,73 1.250 31,75 2-7/8 A-95

3.375 85,73 1.500 38,10 2-7/8 A-95

3.375 85,73 1.750 44,45 2-7/8 A-95

3.375 85,73 2.000 50,80 2-7/8 A-95

SNIPPER OVERSHOTProduct No. 133-34The Snipper Overshot is an overshot specially designed to engage and cut coiledtubing in one run. Unlike other overshots, the Snipper Overshot does not neck down,or crimp the coiled tubing but leaves a full ID. This makes it possible to get wirelinetools or to circulate actuation balls through the fish.

The Snipper Overshot is made up with the catch grapple on top, and the cuttinggrapple on the bottom with extensions placed above the bowl to allow for swallowingof damaged coil. If run on a jointed workstring, it can be run directly on the bottom ofthe string. Both the cutting and engaging grapple are of a bulldog design and theovershot need only be lowered over the fish. Straight pickup will engage coiled tubingand cut. A High Pressure Packoff can be incorporated above this overshot (ProductNo. 133-33, on page 91).

FEATURES/BENEFITS• Minimal over-pull required to make cut• Leaves clean OD and ID• Can be run on coiled tubing or conventional threaded pipe• Retrieves cut piece in the same trip• Full ID

SPECIFICATION GUIDE

Snipper OvershotProduct No. 133-34

93

FISHING SERVICES

NAVI-DRILL MACH 1PHIGH-TORQUE MOTORProduct No. 132-80 (Mud)Product No. 132-81 (Air)Baker Oil Tools is currently offering a lineof positive displacement drilling motorsfor use on coiled tubing and or smalldiameter threaded pipe. Special Navi-Drills - Workover Motors - have beendesigned for these applications.

The Navi Drill M1W1 is a positivedisplacement downhole drilling motorwhich was designed to produce a hightorque at a given pressure drop andcontrolled moderate bit speed.

The Navi-Drill Air Motor (M1WADM)operates at a lower differential pressureand has a slower nominal rotating speedthan conventional motors. Over speed-ing will be avoided in case of suddenload changes, when using compressiblemud systems. Although the Air Motorwas designed for operations with gas,the tool functions equally as well withfluid. These positive displacement mo-tors are used to preform milling,underreaming, cutting, washover, or anyother operation requiring rotation of adownhole assembly.

Navi-Drill positive displacement mo-tors operate by the reverse of the Moineaupump principle. The motor section con-sists of only two components - stator androtor. These two components form aseries of sealed cavities such that, as

fluid is pumped into the tool, the rotor isforced to rotate relative to the stator,allowing the fluid to pass while transmit-ting power to the drive assembly and bit.

FEATURES/BENEFITS• Increased torque capabilities —

increased operational success• Controlled rotational speeds —

protects cutting matrix• Higher flow rate — increased

annular velocity• Air motors with lower RPM —

especially designed for compress-ible mud systems

• The air motor generates a hightorque, but operates with a lowdifferential pressure

Tool Size OD (In.) 1-11/16 2-1/8 2-7/8 3-3/8Connection (In.) 1 AM MT B x B 1-1/2 AM MT B x B 2-3/8 PAC DSI B x B 2-7/8 PAC DSI B x

3/8 API REG BLength (ft.) 8.97 11 11.48 16.78

(m) 2,7 3,4 3,5 5,1 Min (gpm) 12 17 25 80Flow (lpm) 45 64 95 303Rate Max (gpm) 50 74 120 160

(lpm) 189 280 454 606Max Mill Speed (rpm) 640 700 440 365Operating Diff. (psi) 400 640 800 870Pressure (bar) 28 44 55 60Operating (ft/lbs) 66 140 420 720Torque (Nm) 89 190 569 976Power (hp) 2-8 4-19 8 - 26 15 - 50Output (kW) 1.5 - 6 3-14 6 - 20 11 - 37

MUD MOTORSSPECIFICATION GUIDE

Navi-Drill Mach 1PHigh-Torque Mud Motor

Product No. 132-80

Tool Size OD (In.) 3-3/8Connection (In.) 2-7/8 PAC DSI B x

2-3/8 API REG BLength (ft.) 16.78

(m) 5,1Flow (scfm) 700Rate (l/sec) 330Max Mill Speed (rpm) 540Operating Diff. (psi) 230Pressure (bar) 16Operating (ft/lbs) 600Torque (Nm) 813Power (hp) 15 - 23Output (kW) 11 - 17

AIR MOTORSPECIFICATION GUIDE

94

FISHING SERVICES

METAL MUNCHER Step MillProduct No. 151-13

METAL MUNCHER ® JUNK MILLProduct No. 151-06The METAL MUNCHER Junk Mill is designed for themilling of several types of obstructions. The METALMUNCHER Junk Mill utilizes the patented METALMUNCHER cutting technology for maximum rate ofpenetration and extended mill life. METAL MUNCHERmill design is perfect for motor operations because of lowweight, high speed operations. There are a variety ofdesigns which will meet most milling applications, withspecial designs manufactured on request. Baker OilTools maintains a large and varied inventory which willaccommodate most casing and tubing sizes.

FEATURES/BENEFITS• Increased penetration rates• Increased mill life• Smaller cuttings• Superloy backing

METAL MUNCHER® STEP MILLProduct No. 151-13The METAL MUNCHER Step Mill is designed for theremoval of nipple profiles using low torque output mo-tors. The design proves to be extremely effective andhas been used for the economical removal of any IDrestriction, including barium sulphate and other scales.The design allows for only a small amount of cutting perOD increase in the mill. The step feature not only keepstorque and cutting size to a minimum, but also leaves amachine like finish on the surface milled. Wear pads atthe largest OD of the mill reduces risk of damage to thetubing or casing string.

The Step Mill has been built in sizes ranging from 1-1/2" to 8-1/2" OD. The mill may be manufactured with apilot for additional stabilization

FEATURES/BENEFITS• Low torque required• Machine like finish left on milled surface• Longer mill life• Will not damage outer string

METAL MUNCHER Junk MillProduct No. 151-06

95

FISHING SERVICES

BOOT BASKETProduct No. 130-16Boot Baskets are used to trap cuttingswhich are too large to circulate out of thehole during drilling, milling, or junk fish-ing operations. The design of the bootbasket traps junk by producing a suddendecrease in annular velocity when thecuttings pass the larger OD of the bootreaching the smaller OD of the body andtop connection.

The boot basket should be run asclose as possible to the mill, bit, or junkbasket. Milling procedures are carriedout as usual with normal circulation.Additional boot baskets may be run intandem to increase the junk catchingcapacity.

FEATURES/BENEFITS• Simple design and operation• Contracted from AISI 4140 heat-

treated alloy steel• Can be run in tandem• Box-down, pin-up design so that boot

basket may be run directly above a millor bit

• Available in all thru-tubing connec-tions and sizes

VENTURI JET BASKETPRODUCT NO. 130-51

SPECIFICATION GUIDE

Boot BasketProduct No. 130-16

VENTURI JET BASKETProduct No. 130-51The Venturi Jet Basket utilizes the sameproven technology which is used in theCombination Ball Type Jet Basket andthe Jet Bushing, in a small diameter tool,suitable for thru-tubing applications.

The Jet Basket is run on the bottomof a thru-tubing workstring. The millinghead on the bottom of the jet basket maybe dressed according to the desiredapplication. Flow through the tool exitsthe tool through a jet in the barrel of thetool which focuses the flow out of thecirculation port. The increased velocityof the flow through the jet creates areduced pressure in the barrel. This re-duced pressure in the barrel, as well asthe flow down the outside of the tool,creates a flow up the barrel. The flow upthe barrel will wash any debris into thebarrel above the catcher for recoveryfrom the well. A screen below the circu-lation port prevents the junk from beingcirculated back out of the barrel.

FEATURES/BENEFITS• Fully closed finger catchers• May be run with any type of shoe• Do not need to cut core

OD Connection Min Flow Rate Max Flow Rate

In. mm GPM LPM GPM LPM

1-11/16 42,8 AW Rod Pin 12.5 46,8 85 319

2-1/16 50,8 AW Rod Pin 12.5 46,8 85 319

2-5/8 66,6 1-1/4" Reg. Pin 12.5 46,8 120 450

3-1/8 79,3 2-3/8" Reg. Pin 12.5 46,8 135 506

Venturi Jet BasketProduct No. 130-51

96

FISHING SERVICES

“DB” ™ UNDERREAMERProduct No. 150-97The “DB” Underreamer is a rugged and dependable tool used to removecement, sand scale, and other hardened debris from casing below theend of production tubing.

Although the “DB” Underreamer was designed for use with mudmotors on coiled tubing, it has equal application on conventional rigs; orsnubbing units turned by either mud motors or on threaded pipe. The“DB” Underreamer can pass through restrictions and open to full gaugefor a given size and weight of casing.

Proper nozzle size and knife selection are essential for optimumperformance of the “DB” Underreamer. Maximum bit pressure drop andflow rate to achieve maximum torque as well as the mud weight must beknown. (Note: If maximum bit pressure drop and optimum flow rate for themotor are not known, use bit pressure drop of 300 psi and maximum flowrate for the motor in use.) Optimum nozzle size can be selected from thenozzle selection graph provided below.

FEATURES/BENEFITS• Maximum flow after tool is opened• Blades designed with METAL MUNCHER matrix• Sturdy construction for downhole reliability• Positive indication when blades reach full gauge

SPECIFICATION GUIDE

“DB” UnderreamerProduct No. 150-97

TWO-BLADED UNDERREAMERProduct No. 132-52The Two-Bladed Underreamer is used to mill cement sand or scale frombelow tubing or below tubing restrictions. The tool offers the smallest ODof any underreamer. The simple design is piston actuated. Once the toolhas opened to full gauge, the arms are also held open by weight on theblades. The blades may be dressed with proven METAL MUNCHERinserts for maximum cutting efficiency.

FEATURES/BENEFITS• Small OD• Large expanded gauge• Simple design• METAL MUNCHER blades

Two-Bladed UnderreamerProduct No. 132-52

SPECIFICATION GUIDE Tool OD Length Top Max Casing Gage

In. mm In. mm Connection In. mm

1-11/16 42,9 13.31 338,1 1 AM MT 7 177,8

1-13/16 45,9 13.31 338,1 1 AM MT 7 177,8

Size OD Max Open Gauge Top ThreadIn. mm In. mm In.

2.25 57,2 6.22 158,0 1-1/2" MT Box2.63 66,8 8.09 205,4 1-1/4" API Reg. Pin3.00 76,2 8.50 215,9 2-3/8" API Reg. Pin3.63 92,2 8.62 218,9 2-3/8" API Reg. Pin5.13 130,3 12.00 304,8 3-1/2" API Reg. Pin

97

FISHING SERVICES

HYDRAULIC TUBING CUTTERProduct No. 170-03The Hydraulic Tubing Cutters are pres-sure-activated, internal cutters designedto cut small diameter pipe and tubingwith ODs ranging from 1.90" to 3-1/2"(48,26 mm to 88,9 mm). They provide asafe alternative to chemical and explo-sive cutters. The cutters are recom-mended in high-angle holes where fric-tion and drag may restrict mechanical orwireline cutter operations.

The Hydraulic Tubing Cutter is madeup to a coiled tubing string with a tubinganchor to enhance the performance ofthe tool steel cutter knives. The tool isthen lowered into the area to be cut.

If surface rotation is available, rota-tion begins at approximately 30-50 RPM.If cutters are run on a coiled tubing string,the rotation depends on the motor capa-bilities. Pump rate is increased gradu-ally, in increments of 50 psi (3,44), to amaximum of 1500 psi (103,4). Torque isnoted and cutting begins. When the cutis complete, torque should decrease.(Note: In a high-angle hole, torque maynot be noticeable.)

SPECIFICATION GUIDE

Hydraulic Tubing CutterProduct No. 170-03

FEATURES/BENEFITS• Knives are extended by hydraulic pres-

sure and do not require mechanicalslips

• A three-knife design stabilizes the cut-ter and reduces the risk of missed cuts

• Body parts constructed from AISI 4140heat-treated alloy steel

• Knives are of hardened and groundtool steel contoured for the mostefficient cut

• Provides safe alternative to explosiveor chemical cutters

• Recommended for high-angle holeswhere friction and drag may restrictmechanical and wireline type cutters

• Bottom subs with ID and check valveare available

• Can be carried downhole on threadedor coiled tubing workstring, using sur-face rotation, or a downhole motor tocomplete the cut

Tool OD Tubing Range Max Knife Swing Length Connection

In. mm In. mm In. mm In. mm

1-13/16 46 2-3/8 60,3 2-1/2 63,5 22 558,8 1" MT

1-7/8 47,6 2-3/8 60,3 3-5/8 92,1 32 812,8 1" MT

2-1/8 54 2-7/8 - 3-1/2 59 - 88,9 4-3/8 111,1 29 736,6 1-1/2" MT

2-1/2 63,5 3-1/2 88,9 4-7/8 123,8 33 838,2 1-1/2" MT

98

FISHING SERVICES

Tool Outside Diameter Inside Diameter Overall Length Standard

Size In. mm In. mm In. mm Thread

2.13 2.13 54 0.25 6 41.60 1057 1.50" MT

HYDRAULIC INDEXING TOOLProduct No. 132-60The Thru-Tubing Hydraulic Indexing Tool is designed to allow rotation at the end of acoiled tubing retrieving or fishing string. Once washing over or fishing begins, flowthrough the Indexing Tool rotates the tools below 10 - 15°. This is beneficial duringfishing operations when the exact location of the fishing neck is unknown. TheIndexing Tool can also utilize a bent sub or centralizer to help locate the fishing neckin large ID casings.

FEATURES/BENEFITS• Hydraulically actuated• Large ID• All shifting parts are internal

SPECIFICATION GUIDE

Hydraulic Indexing ToolProduct No. 132-60

99

FISHING SERVICES

“CT” Whipstock SystemProduct No. 150-43

“CT” ™ WHIPSTOCK SYSTEMProduct No. 150-43The Coiled Tubing Whipstock System utilizes most of the same field proven technol-ogy of the Eastman Style Conventional Whipstock. The milling system utilizes METALMUNCHER technology so that the window is cut with a minimal amount of torque orweight. Variation in design means that the whipstock must be run separately. Thecoiled tubing whipstock system may be run with several different types of anchors;and, depending on anchor, may be retrieved.

FEATURES AND BENEFITS• May be run with several types of anchors• Coil tubing conveyed• METAL MUNCHER technology• Work can be performed under-balanced• Flex area is incorporated into mills to reduce risk of connection failure

SPECIFICATION GUIDECasing Casing Drift Whipstock Whipstock Mill

Size Size Diameter OD Packer Size

In. mm lbs/ft mm In. mm In. mm In. mm In. mm

5 127,0 18 26,8 4.151 105,4 3-7/8 98,4 4 100,8 4-1/8 104,8

15 22,3 4.283 108,8 4 101,6 4 100,8 4-1/4 108,0

13 19,4 4.369 111,0 4 101,6 4-1/4 108,0 4-1/4 108,0

11.5 17,1 4.435 112,6 4 101,6 4-1/4 108,0 4-3/8 111,1

5-1/2 139,7 23 34,3 4.545 115,4 4-1/4 108,0 4-1/3 109,9 4-1/2 114,3

20 29,8 4.653 118,2 4-1/4 108,0 4-1/3 109,9 4-5/8 117,5

17 25,3 4.767 121,1 4-1/2 114,3 4-1/2 114,3 4-3/4 120,7

15.5 23,1 4.825 122,6 4-1/2 114,3 4-1/2 114,3 4-3/4 120,7

14 20,9 4.887 124,1 4-1/2 114,3 4-1/2 114,3 4-7/8 123,8

6-5/8 168,3 32 47,7 5.55 141,0 5-1/4 133,4 5-1/2 138,9 5-1/2 139,7

28 41,7 5.666 143,9 5-1/4 133,4 5-1/2 138,9 5-5/8 142,9

24 35,7 5.796 147,2 5-1/4 133,4 5-1/2 138,9 5-3/4 146,1

20 29,8 5.924 150,5 5-1/2 139,7 5-1/2 138,9 5-7/8 149,2

7 177,8 38 56,6 5.795 147,2 5-1/4 133,4 5-1/2 138,9 5-3/4 146,1

35 52,1 5.879 149,3 5-1/2 139,7 5-1/2 138,9 5-7/8 149,2

32 47,7 5.969 151,6 5-1/2 139,7 5-2/3 144,5 5-7/8 149,2

29 43,2 6.059 153,9 5-1/2 139,7 5-2/3 144,5 6 152,4

26 38,7 6.151 156,2 5-1/2 139,7 5-2/3 144,5 6-1/8 155,6

23 34,3 6.241 158,5 5-1/2 139,7 5-2/3 144,5 6-1/8 155,6

20 29,8 6.331 160,8 5-1/2 139,7 6-1/5 157,2 6-1/4 158,8

17 25,3 6.413 162,9 5-1/2 139,7 6-1/5 157,2 6-3/8 161,9

100

FISHING SERVICES

SPECIFICATION GUIDE

Casing Casing Whipstock Use Mill Complete Overall Ramp RampDiameter Weight Diameter Diameter Assembly Length Length Angle

In. lbs/ft In. In. Number In. In. (Degrees)mm kg/m mm mm mm mm

60.00 3.250 3.250 150764703 184 138.6 1.4582 82,5 82,5 4673,0 3520,0

41.00 3.625 3.800 150764701 188.9 142.6 261,1 92,1 96,5 4798,0 3622,038.00 3.625 3.800 150764701 188.9 142.6 261,1 92,1 96,5 4798,0 3622,035.00 3.625 3.800 150764701 188.9 142.6 261,1 92,1 96,5 4798,0 3622,0

7 32.00 3.625 3.800 150764701 188.9 142.6 2178 61,1 92,1 96,5 4798,0 3622,0

29.00 3.625 3.800 150764701 188.9 142.6 261,1 92,1 96,5 4798,0 3622,026.00 3.625 3.800 150764701 188.9 142.6 261,1 92,1 96,5 4798,0 3622,023.00 3.625 3.800 150764701 188.9 142.6 261,1 92,1 96,5 4798,0 3622,020.00 3.625 3.800 150764701 188.9 142.6 261,1 92,1 96,5 4798,0 3622,017.00 3.625 3.800 150764701 188.9 142.6 261,1 92,1 96,5 4798,0 3622,0

MECHANICAL THRU-TUBINGPERMANENT WHIPSTOCKProduct No. 150-76MECHANICAL THRU-TUBINGRETRIEVABLE WHIPSTOCKProduct No. 150-50The Mechanical Thru-Tubing Whip-stock is designed to be run on elec-tric line or coiled tubing through pro-duction tubing and set in casing.

The whipstock is run in the holewith an adapter setting sleeve andan “E-4”™ #10 Setting Tool or aModel “J”™ Hydraulic Setting Tool.The whipstock is self-orienting tokick off on the high side of the hole;however, this may be confirmed witha gyro survey. The whipstock shouldbe located approximately 10 ft abovea casing collar.

The Mechanical Thru-TubingWhipstock is composed of two majorcomponents. The first component isa whipstock, which consist of a troughand a slip pad housing. The tough isutilized to guide the milling assemblytowards the casing wall in the desireddirection. The slip housing enclosesthe slip assembly during the runningprocedure. The second componentis the slip pad assembly. Thisassembly consists of the slip, thelower setting bar, and a lower shear

block. The slip pad assembly is uti-lized to transmit the setting forcesexerted by the setting mechanism.Two slip locks, located in the lowershear block, retain the setting forces.The whipstock and slip assemblyare connected by two pivot arms thatallow the whipstock and slip pad tobe wedged against the casing walls.Inserts are utilized to supply the grip-ping force required to hold theassembly during milling. A pivot armwedge supplies the added forcesrequired to prohibit upward move-ment of the whipstock.

The milling operation may be car-ried out with a small diameterworkover motor or a small diameterthreaded workstring.

101

FISHING SERVICES

RUNNING SEQUENCE OFMECHANICAL THRU-TUBING RETRIEVABLE WHIPSTOCK

102

FISHING SERVICES

HYDRAULIC CENTRALIZERProduct No. 132-20HYDRAULIC DRILLINGCENTRALIZERProduct No. 132-21The Thru-Tubing Hydraulic Centralizer is designedto pass through the production tubing and, with theapplication of fluid flow, centralize a BHA in thecasing below. The centralizer is run in the well withthe springs in the retracted position, allowing easypassage through the tubing, production packersand associated nipples. The Hydraulic DrillingCentralizer is designed to handle the high bendingloads that are associated with the mud motor.

Circulation is initiated through an adjustableorifice. Orifice size is predetermined by maxi-mum centralization requirements.

The Hydraulic Centralizer should alway be runwith a Dual Acting Circulating Sub.

FEATURES/BENEFITS• Centralizes retrieving tools in highly deviated

wells• By changing choke size, large flow through tool

is possible without activating centralizingsprings

• Large expansion rating with small run-indiameter

• Collapsable spring allows normal run in hole• Adjustable sleeve allows running in different

casing sizes without changing springs

HYDRAULIC CENTRALIZERPRODUCT NO. 132-20

SPECIFICATION GUIDE

HydraulicDrilling CentralizerProduct No. 132-21

Thru-Tubing Sleeve Type Stabilizer

Product No. 171-30

THRU-TUBING SLEEVETYPE STABILIZERProduct No. 171-30The Sleeve Type Stablizer provides maximum cen-tralization during milling, cutting and fishing opera-tions. The stabilizer consist of a mandrel, top sub andsleeve. The stabilizer blades are manufactured frommild steel to reduce the risk of damage to nippleprofiles. The stabilizer is usually run directly abovethe mud or air motor.

FEATURES/BENEFITS• Non-rotating sleeve reduces vibration• Easily field dressed to accommodate different

tubing IDs• Available in all standard thru-tubing connections

and sizes

MECHANICAL BOWSPRING CENTRALIZERProduct No. 132-24The Mechanical Bow Spring Centralizer is used tocentralize a tool string below restrictions when hy-draulic actuation is not possible. The simple designincorporates non-rotating bow springs which willcollapse when forced into a restriction then expandback to full OD once the restriction has been passed.(No illustration shown.)

FEATURES/BENEFITS• Up to 8" maximum expansion• No actuation required• Available in most thru-tubing

connections and sizes

HYDRAULIC DRILLING CENTRALIZERPRODUCT NO. 132-21

SPECIFICATION GUIDEMax

Tool OD Tool ID Casing Connection

In. mm In. mm Size

1.69 42,9 .44 11,1 7-5/8 1" MT

1.81 46 .42 10,6 7-5/8 1" MT

2.13 54,1 .63 16,0 9-5/8 1-1/2" MT

2.88 73,1 .63 16,0 9-5/8 2-3/8" PAC DSI

3.13 79,5 1.00 25,4 9-5/8 2-3/8" PAC DSI

Max

Tool OD Tool ID Casing Connection

In. mm In. mm Size

1.69 42,9 .44 11,1 7-5/8 1" MT

2.13 54,1 .63 16,0 9-5/8 1-1/2" MT

3.00 76,2 1.00 25,4 9-5/8 2-3/8" PAC DSI

103

FISHING SERVICES

Tool OD Tool ID Length Standard

In. mm In. mm In. mm Connection

1.69 42,9 0.56 14,2 12.50 317,5 1 AM MT

1.75 44,4 0.56 14,2 11.53 292,8 1 AM MT

2.13 54,1 0.81 20,6 17.4 441,9 1-1/2 AM MT

3.13 79,4 1.00 25,4 20.38 517,6 2-3/8 API Reg

KNUCKLE JOINT - SingleProduct No. 132-30KNUCKLE JOINT - DualProduct No. 132-31The Thru-Tubing Knuckle Joints are used in fishingoperations in deviated wellbores, or in any situationrequiring centralization of the catch tool in the cas-ing. The knuckle joints are used in conjunction witha Thru-Tubing Hydraulic or Mechanical Centralizerin order to allow centralization of the catch toolwithout having to overcome the weight of theworkstring against the bottom side of the casing.The Hydraulic or Mechanical Centralizer, therefore,only has to support the weight of itself and the catchtool run below.

The knuckle joints design allows fluid flow throughthe tool, so it can be utilized in washover operations.The knuckle joints may be used in either tubing orwireline fishing applications. The standard knucklejoints are not sealed, but the tolerances are such thatat a sufficent flow rate, the knuckle joint seals be-tween the ball sub and the ball retainer to activateany hydraulic actuated tools below the knuckle joint.A sealed knuckled joint has been designed for lowflow rate applications.

FEATURES/BENEFITS• Less force required to centralize BHA• Pump through capabilities

Knuckle Joint - SingleProduct No. 132-30

KNUCKLE JOINT - SINGLE, PRODUCT NO. 132-30SPECIFICATION GUIDE

Tool OD Tool ID Length Standard

In. mm In. mm In. mm Connection

2.13 54,1 0.81 20,6 25 635 1-1/2 AM MT

3.13 79,4 1.00 25,4 29.25 742,9 2-3/8 API Reg

KNUCKLE JOINT - DUAL, PRODUCT NO. 132-31SPECIFICATION GUIDE

Knuckle Joint - DualProduct No. 132-31

OD (In.) 1-11/16 1-13/16 2-1/8 3 3-3/8(mm) 42,9 46,0 54,1 76,2 52,8

Connection 1 AM MT 1 AM MT 1-1/2 AM MT 2-3/8 PAC DSI 2-3/8 API Reg

NIPPLE PROFILE LOCATORProduct No. 132-25The Thru-Tubing Nipple Locator is a simple meansof locating a known position downhole, allowing formore accurate positioning of the tool string. This isespecially important with a coiled tubing workstringdue to the variation in tubing elongation.

The Nipple Locator consist of three leaf springsretained in a housing. An upset in the middle of thesprings is an expanded diameter greater than themaximum ID of the nipple profile it is intended tolocate; however, the spring can collapse enoughto allow the locator to pass through the nipple. Thecontour of the spring allows the tool to movethrough restrictions easily but with sufficient forceto be detected at surface when passing through arestriction. To overcome the effects of hole drag indeviated wells, the adjustment sleeve allows thetension on the spring to be changed so there will begreater or less drag required to pass through therestriction.

The Nipple Locator cannot be used as a tubingend locator.

FEATURES/ BENEFITS• Simple design• Adjustable drag force• Will locate in most nipples• Mechanically operated

NIPPLE PROFILE LOCATOR, PRODUCT NO. 132-25SPECIFICATION GUIDE

Nipple Profile LocatorProduct No. 132-25

104

FISHING SERVICES

Maximum OD In. / mm 3.00 76,2

Minimum ID In. / mm 0.50 12,7

Maximum Working Pressure (psi / bars) 5000 345

Normal Operational Pressure (psi / bars) 3500 241

Down Force at 3500 psi (lbs / kg) 17,500 7936

Power Piston Area (sq. in. / sq. mm) 5.00 3,225

Tensile Through The Tool (lbs / kg) 80,000 36,281

Required Tension f/ Shear Release (lbs / kg) 25,000 11,338

“HB-3” SELECTIVE SHIFTING TOOLProduct No. 811-98The “HB-3” Hydraulic Shifting Tool is designed forshifting the Baker Oil Tools Type “HL” or “CM”series sliding sleeve by tubing. A flow passageallow washing with tubing while running in well.After washing past the sleeve, an increase of pumppressure causes a piston to compress a spring,allowing a second spring to extend a set of linkagearms extending out. The insert can be shifted eitherbydirectly pushing or pulling on the coiled tubing orby use of an impact tool. After the sleeve is shifted,the shifting tool will automatically release. A de-crease in pump pressure once again retracts thelinkage arms and allows unimpeded movement upand down the hole.

FEATURES/BENEFITS• Fully selective operation, can be run or

retrieved through multiple sliding sleeveswithout manipulating the sleeve

• Application of internal hydraulic pressure downthe coiled tubing will allow linkage arms toexpand

• Low actuation pressure required to expandlinkage

• Linkage system exerts maximum radial forcewhen extended and latched into sleeve insert

• Small run in OD• Wash ports under linkage arms allow debris to

be washed away• Can be run in tandum to shift up and down in

one trip

“HB-3” SELECTIVE SHIFTING TOOLPRODUCT NO. 811-98

SPECIFICATION GUIDE

“HB-3” SelectiveShifting Tool

Product No. 811-98

POWER STROKERProduct No. 811-28The Baker Coiled Tubing Power Stroker is designedto run in conjunction with the “HB-3”™ Shifting Tool.The Power Stroker provides a means to locate andanchor in a Model “HL”™ or “CM”™ Sliding Sleeve.After it is anchored, the Power Stroker provides anadditional downward force with applied hydraulicpressure through the coiled tubing. This appliedforce is independent of the force applied by thecoiled tubing. By locating the sliding sleeve with the“HB-3” before the Power Stroker is activated, anysleeve can be shifted selectively. Specially de-signed locking dogs allow the Power Stroker topositively lock into Sur-Set profiles: “A1”™,“ AF”™,“HF”™, the “F”™ profile, or the “X” profile. The shiftingdistance varies between different types and stylesof “CM” and “HL” sleeves. This change in shiftingdistance is corrected by using different lengths ofconnectors between the “HB-3” and the PowerStroker. When activated, the Power Stroker candeliver 17,500 lbs (7936 kg) downward with 3500psi (241 bars) applied. To shift the sleeve up, asecond “HB-3” is typically run above the PowerStroker. This force is achieved by manipulating thecoiled tubing.

FEATURES/BENEFITS• Applies 17,500 lbs / 7936 kg of force, using 3500

psi / 241 bars• Runs on standard coiled tubing• Can open and close more than one sleeve per

run, utilizing tandem “HB-3s”• Emergency shear release• Will not locate in a profile until 1000 psi / 69 bars

is applied – this allows the “HB-3” to locate thesleeve

• Has a self-cleaning filter, so the fluid in the pistonarea of the tool is always clean

• Slimline OD for maximum bypass when running

POWER STROKER, PRODUCT NO. 811-28SPECIFICATION GUIDE

Power StrokerProduct No. 811-28

Tool Size OD Shifts Sleeve Sizes

In. In. In.mm mm mm

3-1/2 2.50 2.56 - 2.75 - 2.8188,9 63,5 65,0 - 69,8 - 71,3

3.43 - 3.684-1/2 4-1/2 87,1 - 93,4

114,3 76,2 3.75 - 3.8195,2 - 96,7

105

FISHING SERVICES

Tool OD Standard

In. mm Connection

1.69 42,9 1 AM MT

2.13 54,1 1-1/2 AM MT

STANDARD AND LOCKABLESWIVEL SUBProduct Nos. 132-64 & 132-65The Thru-Tubing Lockable Swivel is de-signed to simplify and reduce the timerequired to make up coiled tubingworkstrings. The swivel provides a meansof making up the tool string to the coiltubing connector by simply rotating atthe swivel rather then rotating the toolstring. Once the tool is made up, therotational locking mechanism of the Lock-ing Swivel can be engaged and the toolstring will be locked rotationally.

The Lockable Swivel or Swivel Sub isnormally run just below the coil tubingconnector.

For tool strings that do not require arotation lock a standard Swivel Sub maybe used.

FEATURES/BENEFITS• Simple design• Simplifies picking up BHAs• Teflon backed O-rings• Two piece bearings

Standard Swivel SubProduct No. 132-64

STANDARD SWIVEL SUBPRODUCT NO. 132-64

SPECIFICATION GUIDE

Tool OD Standard

In. mm Connection

1.69 42,9 1 AM MT

2.13 54,1 1-1/2 AM MT

2.88 73,1 2-3/8 PAC DSI

3.13 79,4 2-3/8 PAC DSI

LOCKABLE SWIVEL SUBPRODUCT NO. 132-65

SPECIFICATION GUIDE

DEPLOYMENT BARProduct No. 330-66Baker manufactures a comprehensiveline of Coiled Tubing Deployment Bars.Deployment Bars are used to provide aconvenient, safe means of handlingCoiled Tubing BHAs at surface. To bet-ter expedite handling, the bars becomepart of the BHA; therefore have hightensile and torsional capabilities. Thebars are available in the most commonlyused small diameter connections.

Deployment BarProduct No. 330-66

Lockable Swivel SubProduct No. 132-65

DEPLOYMENT BARPRODUCT NO. 330-66

SPECIFICATION GUIDE

OD Top Bottom

In. mm Thread Thread

1.69 1,25 1" AM MT Box 1" AM MT Pin

2.13 1,50 1-1/2" AM MT Box 1-1/2" AM MT Pin

2.88 1,75 2-3/8" PAC DSI 2-3/8" PAC DSI

106

FISHING SERVICES

SPINNING WASH TOOLProduct No. 132-66The Spinning Wash Tool has a high speed wash head running on two setsof sealed bearings. The two jetted blades efficiently clear loose scale, sand,and debris reducing drag on tubing during run in and out of the well. Thisincreases working depth capabilities, particularly in highly deviated wellbores.Additionally this tool may be used to impregnate scales with acid or otherinhibitors. Also many different corrosives, neutralizers, and other fluids maybe circulated as the bearing assemblies are isolated.

The tool is capable of pressures commonly used with coil and snubbingoperations and is strong enough to withstand spudding techniques typicallyused in sand washing.

FEATURES/BENEFITS• High speed rotation• Sealed bearings• May be run with a variety of fluids• Can be run on coiled tubing or conventional threaded pipe

SPECIFICATION GUIDE

Spinning Wash ToolProduct No. 132-66

Tool OD Length StandardIn. In. Connection

mm mm

1.44 15.75 3/4" CS Hydril36,6 400,0

1.69 14.75 1" MT42,9 374,6

1.75 14.75 1" MT44,5 374,6

2.25 19.75 1-1/2" MT57,2 374,6

107

FISHING SERVICES

HYDRATIGHT TONGSThe Hydratight Tongs are designed to work in close quartersto obtain recommended makeup torque on tool joints andtubing connections. The Power Pack is an air drivenhydraulic unit which requires 90 psi (6,2 bars)at 110 cft/m.The remote control unit is complete with air hoses and quickdisconnect couplings. Maximum torque is 10,000 ft/lb witha maximum catch range from 2-1/4" OD to 4-3/4" OD.

The tongs can be dressed with standard carbarized diesor special soft touch fiber dies, which reduce the risk of anydamage to the tubulars or tubular coatings. With the fiberdies, the maximum working OD is 3-3/4" and 10,000 ft/lb(13600 Nm) of torque. Variable heads are also availablewhich will catch on tubulars with up to 1-1/2" variance in ODwithout changing the heads.

FEATURES/BENEFITS• Uses rig air• Can be controlled by remote• Compact design• Easily converted to different catch ranges

THRU-TUBING FISHINGTOOLS CONTAINERThe Thru-Tubing Fishing Tools Container is designed andmanufactured in accordance with BS 7072: 989 and DNV“Offshore Freight Container Design and Certification Notes2.7-1.” The container is supplied with slings and shackleswith the applicable offshore certification.

The container is supplied with a heavy duty work bench,horizontal mill, sub storage rack, wall storage rack, “C” vice,chain vice, Wolf Turbolite (airlight), a two-piece pressuretest module, and chart recorder.

The tools supplied will consist of a comprehensivecompliment of tools required for proposed operations aswell as fishing tools for proposed BHAs.

108

FISHING SERVICES

BOWEN TOOLS, INC.

The Series 150 Bowen Releasing and Circulating OvershotThe Series 150 Bowen Releasing and Circulating Overshot is the strongest toolavailable to externally engage, pack-off, and pull a fish. The basic simplicity andrugged construction with which it is designed have made it the standard of all externalcatch fishing tools.

The Series 150 Bowen Releasing and Circulating Overshot is composed of threeoutside parts: top sub, bowl, and guide. The Basic Overshot may be dressed witheither of two sets of internal parts depending on whether the fish to be caught is nearmaximum size for the particular overshot.

Some special conditions apply. If the fish diameter is near the maximum catch ofthe Overshot, a Spiral Grapple, Spiral Grapple Control, and “A” Packer are used. Ifthe fish diameter is considerably below maximum catch size (usually 1/2"), a BasketGrapple and a Mil Control Packer are used.

Itco Type Bowen Releasing SpearItco Type Bowen Releasing Spears provide a dependable, inexpensive, and simplemeans of engaging a fish internally. These spears assure positive engagement, easyrelease from the fish when desired, and easy reengagement after the spear has beenreleased

The Itco Type Bowen Releasing Spear consists of a Mandrel, Grapple, ReleaseRing, and Nut. The Mandrel may be obtained in either a Flush Type or a ShoulderType. Mandrel Top connections are furnished to order. The nut can be obtained asa plain bull-nose guide or with a pin connection for the attachment of other tools belowthe spear.

Bowen Lubricated Fishing Bumper SubBowen Lubricated Fishing Bumper Subs are engineered to withstand sustainedbumping action in severe fishing and deep workover operations. The tools permit a10" to 18" vertical stroke, either upward or downward, that is always available whetherrotating or not. Tools with strokes greater than 18" to 60" are available on request atextra cost.

A fishing string made up properly always includes a dependable Bumper Sub.This is absolutely mandatory when the fishing job is severe, or includes tools whichrequire sharp bumping action to actuate or release them.

Itco Type BowenReleasing Spear

The Series 150 Bowen Releasingand Circulating Overshot

109

FISHING SERVICES

BOWEN TOOLS, INC. (Cont.)

Power SwivelsAll of Bowen’s Power Swivels are engineered to provide smooth shock-free torque, which reduces drillstring wear. Using a

Bowen Power Swivel, in most applications, eliminates spinning chains, tongs, and kelly spinners. This permits drilling in longerdrillstring lengths before shutting down to add pipe which reduces start-ups and stops. Consequently a reduction in start-ups/stopshelps to reduce wear of pump, drawworks, and overall rig equipment.

Bowen offers a complete line of Power Swivels. They range from small portable units used mostly for light workovers to modelscapable of 20,000 plus ft/lbs (27200 Nm) of torque designed for deep well drilling or large piling hole work. This broad spectrumof available equipment allows selection of units suited to the requirements of most jobs. Tailor-made units with speeds and torqueratings suited for any job are also available.

Custom made hardened steel gears and conservatively rated bearings are standard on most models. Control Assemblies maybe air, electric, or uniblock (hydraulic). They are mounted on portable stands which may be remotely located away from the powerunit. Calibrated torque gauges are standard. Power Swivels are furnished with a bail, circulating gooseneck, and wireline accessplug.

110

FISHING SERVICES

BOWEN TOOLS, INC. (Cont.)

Bowen Super Fishing Jar

Bowen Super Fishing JarThe Bowen Super Fishing Jar is a straight-pull operated jar which employs a patentedcombination of proven principles of hydraulics and mechanics. This jar is easy toassemble and the unique design allows for easy operation.

No setting or adjustment is required before going in the hole or after the fish hasbeen engaged. The Bowen Super Fishing Jar is designed to permit the operator toefficiently control the intensity of the jarring blow within a wide range — a very lightimpact to a blow of very high impact.

The unique impact control of the Bowen Super Fishing Jar is made possible by thepatented cone assembly. As pull is applied to the jar, oil is forced from one side of thecone to the other through a metering slot. By being forced through a restrictedpassage, the fluid flow is retarded in such a manner that the stroke is delayed so theoperator has ample time to take the necessary stretch in the running string (and SuperIntensifier, when it is used) to strike a blow of given impact.

Another important feature of the Super Fishing Jar is the ease of closing orresetting. Only sufficient weight to overcome friction is required. Closing is free of anydanger of causing damage to the tool since the metering action does not take placeduring resetting. During resetting, large ports are appending to the cone assemblyallowing unimpeded flow of fluid from one cavity to the other.

Bowen Jar IntensifiersThe Bowen Jar Intensifier is run in conjunction with the Bowen Jar, either the BowenType Z Oil Jar, or Super Fishing Jar. It supplies acceleration to the upper-end of theJar and lower portion of the workstring during the jarring stroke.

Each Bowen Jar Intensifier is designed to match a corresponding Bowen RotaryJar. The intensifier is essentially a fluid spring which stores energy when a strain ispulled on the running string. When the strain is removed by the free stroke of the jar,this stored energy is released accelerating the drill collars and jar end upward until ablow of high impact is struck.

The Bowen Jar Intensifier is particularly valuable in deep, crooked holes wheremuch of the stretch of the string is lost in friction. The tool is equally valuable at veryshallow depths where very little stretch is available due to the short working string.Excessive numbers of drill collars should not be used when the intensifier is in use. Asecondary advantage of the rebounding string after the jarring stroke is the protectionof tools and string from damage.

Full torque may be transmitted by the intensifier at all times in either direction, andfull circulation may be maintained through the tool.

Operation of the tool is very simple requiring only straight pull as rapidly or as slowlyas required for the operation.

The Bowen Surface Bumper JarThe Bowen Surface Bumper Jar is designed to be installed in the drillstring at thesurface during fishing operations. This requires downward jarring impacts against afish at the point where it is stuck. By a simple adjustment it may be set to vary the jarringforce. The stroke of the tool is 48 inches, allowing the fish to be hammered down muchfarther than could be done with a conventional rotary jar.

This tool provides many other outstanding advantages. It is unique in that it is usedonly on the surface to release a stuck fish. Due to this intermittent usage, the servicelife of this tool is greatly extended when compared with conventional bumper subs.

111

FISHING SERVICES

HOUSTON ENGINEERING, INC.

HE PULLMASTERHYDRAULIC PULLING TOOLThe HE Pullmaster is designed to pullliners, packers, or other objects whenworkstring or surface equipment has lim-ited pulling capabilities.

The Pullmaster consists of a controlvalve, an anchor section, and pullingsection. The control valve section per-mits the release of the slips and pullregardless of the hydrostatic differential.The anchor section has piston slips thatprovide sufficient holding area to trans-mit the pull without deforming the casing.The pull section exerts a multiplied pull-ing force over a 30" stroke.

Any type of engaging tool may beused with the Pullmaster.

HE Pullmaster

112

FISHING SERVICES

HOUSTON ENGINEERING, INC. (CONT.)

HE “DH” RELEASABLE WASHOVEREXTERNAL TUBING CUTTERThe “DH” Cutter is designed to washover, cut, and recoverstuck tubing in lengths up to 1500 ft. Unlike most externalcutters, the initial run with a rotary shoe and washover pipe iseliminated. The “DH” Cutter is also the only releasableexternal cutter. The cutter is operated mechanically and is notaffected by temperature, hydrostatic pressures, or fluid move-ment.

“AH” - “AJ” MODELREVERSING TOOLSThe Houston Engineers’ “AH” - “AJ” Model Reversing Toolsare used to unscrew and recover sections of right-handstrings of pipe that are stuck in a wellbore. Using theReversing Tool on right-hand drill pipe or tubing eliminatesthe need for a complete string of left-hand pipe to recover losttubing or drill pipe.

The Reversing Tool is a combination of planetary gearingand anchoring systems. It is capable of converting right-handtorque from surface to a powerful left-hand torque below thetool to the fish. Because the tool is mechanically operated, itis possible to washdown and wireline through the tool.

The Reversing Tool must be anchored in casing, if the fishis in open hole left-hand pipe must be run below the Revers-ing Tool.

“DH” Releasable WashoverExternal Tubing Cutter

“AJ” ModelReversing Tool

113

FISHING SERVICES

HE FISHING BUMPER SUBThe HE Fishing Bumper Sub is an economical ruggedbumper-sub designed to endure extremely tough downholeuse. It incorporates optimum stroke, torque transmission,and improved life. The free travel of the sub is used to jardown on a fish and to isolate a fishing tool from the drillstring.Drill collars may be run below the Bumper Sub when aprecise weight is required for a downhole operation.

"TMC" HYDRAULIC JAR

The HE "TMC" Hydraulic Jar is the newest development inthe HE family of effective hydraulic jars. The "TMC" Jar addsthe advantage of a closed drive system that is not open to thewell fluid, where that use is appropriate.

HE MAGNUM™ DRILLINGACCELERATOR ® TOOLThe HE Magnum Drilling Accelerator Tool is a gas operatedenergy accumulator tool used to increase jar impact. The toolis nitrogen gas charged to provide fast acceleration of the drillcollar mass resulting in higher impact. The accelerator alsoacts as a shock absorber on the up shock waves that aretransmitted vertically in jarring strings.

Houston Engineers also manufacture a double actingHydraulic Accelerator. (No illustration shown.)

HOUSTON ENGINEERING, INC. (CONT.)

Lubricated BumperSub Type EBL

"TMC" Hydraulic Jar

114

FISHING SERVICESFISHING SERVICES / LOCATIONS

WORLDHEADQUARTERS9100 Emmott RoadHouston, TX 77040P. O. Box 40129Houston, TX 77240-0129Telephone: (713) 466-1322Fax: (713) 466-2314

WESTERNHEMISPHEREALASKAAnchorage4710 Business Park Blvd.Suite 36Anchorage, AK 99503Tel: 907-561-1939Fax: 907-563-0385

KenaiMill 26.5 N. North RoadNikiski, AK 99635Tel: 907-776-8791Fax: 907-776-5624

Prudhoe BaySpine RoadPouch 340036Prudhoe Bay, AK 99734Tel: 907-659-2467Fax: 907-659-2276

ARKANSASMagnoliaP.O. Box 4061708 N Vine @ Waldo HwyMagnolia, AR 71753Tel: 501-234-5571Fax: 501-234-2859

CALIFORNIABakersfield4230 Foster Ave.Bakersfield, CA 93308Tel: 805-327-7201Fax: 805-324-5296

Huntington Beach5501 Engineer Dr.Huntington Beach, CA 92649Tel: 714-891-8544Fax: 714-893-1041

Imperial220 E. BaroniImperial, CA 92251Tel: 619-355-2828Fax: 619-355-2820

CANADACalgary1300 401-9th Ave S WCalgary, AlbertaT2P3C58 CanadaTel: 403-296-9600Fax: 403-296-9688

Edmonton2110 -70 Avenue NWEdmonton, AlbertaT6P IN6 CanadaTel: 403-440-2110Fax: 403-440-4909

Brooks620-1 Avenue, EastP O Box 1357Brooks AlbertaT1R 1C3 CanadaTel: 403-362-4232Fax: 403-362-8159

Grand Prairie11456 96th Avenue SWGrand Prairie, AlbertaT8V 5M4 CanadaTel: 403-539-6700Fax: 403-539-6352

Red DeerBay 2, 6879 52nd AvenueRed Deer, AlbertaT4N 4L2 CanadaTel: 403-340-3500Fax: 403-341-3703

Whitecourt3702-37 AvenueWhitecourt, AlbertaT0E 2L0 CanadaTel: 403-778-4103Fax: 403-778-4474

ILLINOISOlneyPO Box 280700-A West LafayetteOlney, IL 62450Tel: 618-395-2179Fax: 618-392-3375

LOUISIANABossier City4907 Hazel Jones DrBossier City, LA 71111Tel: 318-746-3800Fax: 318-742-5827

Houma3175 Little Bayou Black Rd.Houma, LA 70364Tel: 504-876-1097Fax: 504-876-3756

Houma (Whipstock)P.O. Box 39143030 Little Bayou Black RdHouma, LA 70361Tel: 504-872-1475Fax: 504-872-0111

Lake Charles5432 E. Broad StLake Charles, LA 70601Tel: 318-433-4652Fax: 318-433-7427

Morgan CityP.O. Box 2177Hwy 90 EastMorgan City, LA 70380Tel: 504-631-2161Fax: 504-631-2956

New IberiaP.O. Box 101253915 Hwy. 90 EastNew Iberia, LA 70560Tel: 318-369-3731Fax: 318-364-2418

RustonP O Box 1002016 Farmerville HwyRuston, LA 71270Tel: 318-255-5214Fax: 318-255-2140

VeniceP O Box 240Hwy 23 SouthVenice, LA 70091Tel: 504-534-2363Fax. 504-534-7319

MICHIGANMt PleasantP O Box 5081950 Commercial DrMt Pleasant, MI 48858Tel: 517-772-1600Fax: 517-772-0928

NEW MEXICOFarmington2795 Inland StreetFarmington, NM 87401Tel: 505-327-3266Fax: 505-327-4497

OHIOWooster5690 Cleveland RdWooster, OH 44691Tel: 216-345-1744Fax: 216-345-1877

OKLAHOMAElk City110 Meadowridge DriveElk City, OK 73644Tel: 405-243-3424Fax: 405-243-3429

Oklahoma City6421 S Sooner RdOklahoma City, OK 73135Tel: 405-670-5203Fax: 405-670-1644

Ratliff CityP O Box 250Ratliff City, OK 73081Tel: 405-856-3472Fax: 405-856-4052

MISSISSIPPILaurelP.O. Box 22173038 Ellisville Blvd.Laurel, MS 39440Tel: 601-428-1571Fax: 601-426-2076

PENNSYLVANIACorry13255 Route 6-WP O Box 214Corry PA 16407Tel: 814-664-9131Fax: 814-664-5445

TEXASAlice2406 Industrial DriveAlice, TX 78332Tel: 512-664-2220Fax: 512-664-2223

Beaumont6810 S Major DrBeaumont, TX 77705Tel: 409-866-2335Fax: 409-842-5327

Kilgore2306 Hwy 135 NP O Box 673Kilgore, TX 75662-0673Tel: 903-984-5001Fax: 903-983-2437

Midland/Odessa10912 W. Hwy 80 EOdessa, TX 79765Tel: 915-563-1900Fax: 915-563-3625

PalestineHwy 79 WestP.O. Box 528Palestine, TX 75801-0528Tel: 903-538-2011Fax: 903-538-2782

Pearland3809 Magnolia StPearland, TX 77584Tel: 281-485-8341Fax:281-997-2477

Victoria128 Stockbauer DrVictoria, TX 77904Tel: 512-575-6468Fax: 512-576-5967

WEST VIRGINIAClarksburgOld Route 50Sun Valley RdClarksburg, WV 26301Tel: 304-624-7621Fax: 304-624-9360

WYOMINGEvanston1259 Hwy 89 NorthEvanston, WY 82930-0957Tel: 307-789-4800Fax: 307-789-2027

Rock Springs705 Mohawk DriveRock Springs, WY 82901Tel: 307-362-6233Fax: 307-382-3590

LATIN AMERICAMEXICOVillahermosaBaker Hughes de MexicoAV. 27 DeFebrero 1737Col. AtastalVillahermosa, Tab 86100Tel: 52-93-152618Fax: 52-93-150580

Ciudad Del CarmenBaker Hughes de MexicoCalle 31 No 244Col. Aviacion CivilCD Del CarmenCamp. 24170 MexicoTel: 52-938-23224Fax: 52-938-24135

VENEZUELAAnacoBaker Hughes de VenezuelaAvenida José A AnzoateguiKilometro 98Anaco, Edo Anzoategui,VenezuelaTel: 58-82-246-664Fax: 58-82-247-743

Las MorochasBaker Hughes De VenezuelaAvenida Intercomunal, CampoBakerLas Morochas, Edo. Zuila,VenezuelaTel: 58-65-310271Fax: 58-65-310895

MIDDLE EASTAbu DhabiBaker Eastern S AP O Box 7621Abu Dhabi, U A ETel: 971-2-773200Fax: 971-2-722483

DubaiBaker Oil ToolsJabel Ali Free ZoneOffice B17 Jebel All, U AETel: 971-4-836322Fax: 971-4-836488

EgyptBaker Eastern S A /TSOT Egypt21 Road 263 Corner 281Third Sector New MaadiCairo, EgyptTel: 202-352-1651Fax: 202-353-3638

OmanBaker Eastern S.A.c/o Amran EstablishmentP O Box 919Muscat, OmanTel: 968-601717Fax: 968-697570

ASIA PACIFICAUSTRALIASaleDawson StreetSale, Victoria 3850AustraliaTel: 61-51-442-4296Fax: 61-51-44-966

Perth1-5 Bell Street,Canning Vale, W Australia 6155Tel: 61-9-455-0155Fax: 61-9-455-1117BruneiNo 2769 Jalan BolkiahP O Box 541 Seria 7005Brunei, DarussalamTel: 673-3-223-273Fax: 673-3-224-160

CHINAShekouBaker Hughes IncorporatedShekou Representative Office2/f Chiwan BuildingChiwan Petrolem Supply BaseShekou, ShenzhenP R CTel: 86-755-669-1294Fax: 86-755-669-3852

INDONESIAJakartaPT Imeco SaranaJL Ampera Raya Kav 9-10Jakarta, Indonesia 12550Fax: 62-21-780-7885Tel: 62-21-780-5432/780-5421

BalikpapanBaker Oil Toolsc/o P T Gema Baker NusantaraJL Mulawarman KM16Balikpapan76115East KalimantanTel: 62-542-24391Fax: 62-542-35068

SingaporeBaker Oil Tools Asia Pacific273 Jalan Ahmad Ibrahim,Singapore 2262Tel: 65-861-3455Fax: 65-861-0050/861-3163

ThailandBaker Oil Tools92/47 Moo2Tambon kaoroopchangKarnchanavanich RoadAmhur MuangSongkhla 90000ThailandTel: 66-74324-281Fax: 66-74324-831

EUROPE/AFRICAOPERATIONSGERMANYCelleGraffring 9 29227Celle, GermanyTel: 49-5141-98870Fax: 49-5141-988729

ENGLANDGreat YarmouthEurocntre, North River RdGreat YarmouthNorfolk, NR3O ITEEnglandTel: 44-1493-332212Fax: 44-1493-852294

NORWAYStavangerBreiflåtveien 15,4004 Stavager, NorwayTel: 47-51-589050Fax: 47-51-586148

Baker Oil ToolsKakstadveien 385061 KokstadBergen NorwayTel: 47-5-228370Fax: 47-5-228930

SCOTLANDDyceKirkhill Industrail EstatesDyce, Aberdeen AB2 OGYScotlandTel: 44-224-223500Fax: 44-224-771575

THE NETHERLANDSImjuidenAmperestraat 1F1976 BE, IjmuidenThe NetherlandsTel: 31-2550-33654Fax; 31-2550-33643