Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
SMI-1450
7 Pad Electronic
Sistema Electrónico del Tambor de
Ensemble Électronique de Tambour de
Drum Set
7 Cojines
7 Garnitures
HANDLING AND TRANSPORT
•
•
•
•
Never apply excessive force to the controls,connectors or other parts of the instrument.Always unplug cables by gripping the plug firmly,but not pulling on the cable.Disconnect all cables before moving theinstrument.Physical shocks caused by dropping, bumping, orplacing heavy objects on the instrument canresult in scratches and more serious damage.
Clean the unit with a dry soft cloth.A slightly damp cloth may be used to removestubborn grime and dirt.Never use cleaners such as alcohol or thinner.Avoid placing vinyl objects on top of the unit (vinylcan stick to and discolor the surface).
This instrument contains digital circuitry and maycause interference if placed too close to a radioor television receiver. If this occurs, move theinstrument away from the affected equipment.
CLEANING
ELECTRICAL INTERFERENCE
••
••
•
LOCATION
• Do not expose the unit to the following conditionsto avoid deformation, discoloration, or moreserious damage.Direct sunlight.High temperature (near a heat source, or in acar during the daytime).Excessive humidity.
Turn the power switch OFF when the instrumentis not in use.The AC adapter should be unplugged from the ACoutlet if the instrument is not in use for anextended period of time.Unplug the AC adapter during electric storms.Avoid plugging the AC adapter into the same ACoutlet as an appliances with high powerconsumption, such as electric heaters or ovens.Also avoid using multi-plug adapters since thiscan result in reducing the sound quality,operation errors, and possible damage.
To avoid damage to the instrument and otherdevices to which it is connected, turn OFF thepower switches of all related devices prior toconnecting or disconnecting cables.
••
•••
Excessive dust.Strong vibration.
POWER SUPPLY
•
•
••
•
TURN POWER OFF WHEN MAKING CONNECTIONS
Thank you for purchasing your SOUNDX Portable Digital Drum Set. This Digital Drum Set has been developed toperform with ease. Before using this instrument, we recommend that you to read through this manual.
please follow the maintenance instructions listed below:For optimum use of your Digital Drum Set,
Congratulations!
Taking care of your Portable Digital Drum Set
Englis
h
E02
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Panel Controls
Setting Up
Functions
Operation
Making The Connection
Specifications
Voice List
Drum Kit List
Song List
MIDI Implementation Chart
............................................................................................. 4
.................................................................................................... 6
..................................................................................................... 7
.................................................................................................. 10
.............................................................................. 13
............................................................................................ 14........................................................................................... 15 - 16
............................................................................................ 17............................................................................................ 17 - 18
....................................................................... 19
- Front panel .................................................................................................. 4- Rear Panel................................................................................................... 5
- Using the AC - Adaptor .................................................................................. 6- Using Batteries ............................................................................................ 6- Using Headphones ........................................................................................ 6
- Select a Drum Kit ........................................................................................ 7- Set Pad Voice .............................................................................................. 7- Set Pad Volume ........................................................................................... 7- Set Pad Pan ................................................................................................ 8
- Play Song ................................................................................................. 10- Adjust Main Volume ................................................................................... 10- Adjust Accompaniment Volume .................................................................... 10- Drum Off .................................................................................................. 10- Adjust Tempo Function ............................................................................... 11- Metronome ............................................................................................... 11- Hand Percussion ........................................................................................ 11- Demo Function .......................................................................................... 11
- Pedals ...................................................................................................... 13- Phones Output .......................................................................................... 13- USB Jack ................................................................................................. 13
- Set Pad Gain ............................................................................................... 8- Save Kit ...................................................................................................... 9
- Adjust Reverb Function ............................................................................... 12- Record Function ......................................................................................... 12- Playback Function ...................................................................................... 12
Englis
h
E03
CONTENTS
[ Master Volume + & - ] button
[ Power on – off ] switch
[ Play / Stop ] button
[ REC ] button and LED indicator
[ Click ] button and LED indicator
[ Reverb ] button
[ Pad Assign ] button
3-Digit LED
These buttons can be used to change themaster volume UP or DOWN.
This switch turns power on / off.
This button is used to start or stop recordingreplay.
This button is used to start or stop recording.
This button is used to turn on or off themetronome.
This button is used to change the reverb level.
This button is used to enter voice or volumemenu.
This LED is the main display device, which willshow the parameters of the current menu.
[ Kit ] buttonThis button is used to enter kit menu.
[ Song ] button
[ Hand Percussion ] button and LED indicator
[ Drum OFF ] button and LED indicator
[ Select + & - ] buttons
[ Save ] button
[ Acc Volume + & - ] buttons
[ Tempo + & - ] buttons
[ Dial ] button
This button is used to enter song menu.
This button is used to turn the handpercussion function ON.
This button is used to enable or disable thedrum function when listening to all songs.
These buttons are used to change values (kitnumber, voice number, song number, etc.)when editing.
This button is used to save all current kitsetting to a user kit.
These buttons can be used to change theaccompaniment volume.
These buttons are used to change current thetempo.
This button is used to change values (kitnumber, voice number, song number, etc.)when editing.
Englis
h
E04
5
1
2
3
4
6
7
9
14
13
12
11
Front Panel
PANEL CONTROL
1 2 3 4 5 6 7 8 9 10 11 13121 14
15 16 17 1918 20 21 22
DRUM PAD (x7)
8
10
17
16
15
23
Phones JackThis jack is used to connect the headphones.(Connecting the headphones will not mute the output jacks).
[ KICK / HI-HAT ] Pedal Input Jack
USB Jack
DC Jack
Kick and Hi-Hat pedal input jacks.
This port is used to connect all external device.
Connect to a DC 12V power adaptor.( As specified on PAGE E06 )
[ Pan ] button
[ Volume ] button
Speakers
This button is used to change the pan of allpad.
This button is used to change the volume ofpad.
[ Start / Stop ] button
[ Demo ] button
This button can be used to start or stopplaying all songs.
This button is used to start or stop a demosong.
[ Gain ] buttonThis button is used to change the gain ofpad.
Englis
h
E05
PANEL CONTROL
Front Panel
Rear Panel
21
22
20
19
18
23
24 25 26 27
24
25
26
27
Connecting the Foot Pedals (1&2)
Note:
The supplies foot pedals can be connected to the unit to simultaneously play the drumset’s hi-hat pedal or bass drum voices. They can also be assigned to play other voices.
Do not press the pedal while connecting it to the unit or while turning on the power.(Connecting in this manner with the power on, the pedal’s function may be reversed.)
PHONES KICK HI HAT USB 12V
SETTING UP
Power Supply
Your digital drum set will operate on either batteries or the supplied power adaptor. Follow theinstructions below according to the power source you intend to use.
Using the AC-AdaptorConnect the power adaptor to the DC IN jacklocated on the rear panel of the unit, and plug theAC power adaptor into an AC power outlet.
Do not use adaptors other than the one specified.The technical specification of the adaptor is DC12V output, center positive type.
Using Batteries1. Open the battery compartment cover under
the unit.
2. Insert six “C” size, R14 SUM-2 or equivalentbatteries. When inserting the batteries, followthe polarity markings in the illustration.
Note: We suggest using alkaline batteries.
3. Close the battery compartment securely.
Using Headphones
An optional set of stereo headphones can be connectedto the PHONES/OUTPUT jack located on the rear panel.When headphones are connected to the jack, theinternal speakers of the unit will switch off automatically(Perfect for private practice or late night playing). If youwould prefer to use an external sound system, theheadphone jack can also be used to connect the digitaldrum set to a stereo system or mixing console.
Turn off the power on all equipment beforemaking any connections.Note:
E06
PHONES KICK HI HAT USB 12V
NOTE:
•
•
•
•
•
Power will be automatically drawn from the AC adaptor if an optional AC adaptor is connected while batteries areinstalled in the instrument.
It is recommended that you replace worn batteries as soon as possible. When battery voltage drops, the display willdim and / or the sound will become distorted, when this occurs, replace the batteries with a complete set of six newbatteries of the same type.NEVER mix old and new batteries, different types of batteries (alkaline, magnesium, etc.), different brand batteries orbatteries from the same brand but of different types. Misuse may cause the instrument to become hot, result in fire,or battery leakage.Also, to prevent damage due to battery leakage, remove all the batteries from the instrument when it is not to beused for an extended period of time.If batteries are installed in this instrument, and the instrument is unused for a long period, they will loose their power.
CAUTION:
Englis
h
Kit menu is the default menu after powering the unit onthe default value is 001.
Press the [kit] button to enter a kit menu. The 3-digitLED will display the current kit number with thecorresponding menu indicator illuminating. As shownon the illustration. The buttons select [+] / [-] or [dial]can be used to select any kit (1-30, loop) as thecurrent kit.
Press the [ volume ] button to enter the pad assignmenu. If the pad assign menu is selected, thecorresponding menu indicator will be lit up.
In this menu, the 3-digit LED will display the volume ofcurrent pad, which can be selected by pressing the padbutton on the top panel or by pad striking. The select[+] / [-] buttons or [dial] can be used to select thevolume (0-9, loop) for the current pad.
Press the pad assign button to enter pad assign menu.Default value will be the voice value of crash pad basedon different kits selected. For example, if kit 001 hasbeen selected, then press pad assign, the value on LEDwill be 96, as this is the voice value on crash pad.
If the pad assign menu is selected the correspondingvoice will be indication on the LED.
In this menu, the 3-digit LED will display the voicenumber of the current pad, which can be selected bypressing this pad button on the top panel or by padstriking. The select [+] / [-] or [dial] can be used toselect any voice (1-215, loop) buttons for the currentpad.
E07
Select aDrum Kit
SetPadVoice
SetPadVolume
Englis
h
FUNCTION
SetPadPan
Press the [pan] button to enter the pad assign menu. Ifthe pad assign menu is selected, the correspondingmenu indicator will be lit up.
In this menu, the 3-digit LED will display the pan of thecurrent pad, which can be selected by pressing the padassign button on the top panel or by pad striking. Theselect [+] / [-] buttons or [dial] can be used to selectthe pan (0-9, loop) for the current pad.E
nglis
h
E08
SetPadGain
Press the [gain] button to enter the pad assign menu. Ifthe pad assign menu is selected, the correspondingmenu indicator will be lit up.
In this menu, the 3-digit LED will display the gain of thecurrent pad, which can be selected by pressing the padassign button on the top panel or by pad striking. Theselect [+] / [-] buttons or [dial] can be used to selectthe pan (0-9, loop) for the current pad.
Save Kit
Press the [save] button to enter the kit save menu. Theselect [+] / [-] buttons or [dial] can be used to select auser kit (21-30, loop) on the current kit setting. Duringthe kit selection, the user kit number will keep flashing.
Press the [save] button again; the current kit settingwill be saved to the selected kit. The unit will suspendthe kit menu and select this user kit as the current one,if all the data has been saved successfully.
If saving has failed due to error, an ‘Err’ will appear onthe LED.
The unsaved kit setting will be lost after changing thekit.
Note:
E09
Englis
h
In the main volume menu, the digit on the far left sideof the LED will display the letter ‘L’. The two digits onthe right side will display the current main volume. Theselect [+] / [-] buttons or [dial] can be used to adjustthe volume (0-9, not loop). This value will be auto-savedafter adjusted.
In the accompaniment volume menu, the digit on theleft side of the LED will display the letter’A’. The twodigits on the right side will dispaly the currentaccompaniment volume. The select [+] / [-] buttons or[dial] can be used to adjust the volume (0-9, not loop).This value will be auto-saved after adjusted.
Press the [song] button to enter the song menu. Thedefault value is 001. The 3-digit LED will display thecurrent song number with the corresponding menuindicator lit up. The select [+] / [-] buttons or [dial] canbe used to select the current song (1-100, loop). Iffirst 80 style playing loop. Press the [start / stop]button to start or stop the song player. If the song isswitched while it’s playing, the new song will not startuntil the end of the current measure.
Each song has its own default tempo and drum kit, thesong player will begin at the current kit and the currenttempo, from the beginning of the song play
E10
OPERATION
Play Song
AdjustMainVolume
AdjustAccompanimentVolume
Pressing the [drum off] button will enable or disable thedrum off function when a song is playing. If the drum offis enabled, the drum voice will be turned off and thedrum off indicator will be lit. This function is quite usefulfor practicing.
Drum Off
Englis
h
Press the tempo [+] and [-] buttons to enter the tempomenu. The [+] and [-] buttons can be used to changethe current tempo (30-280, not loop), which affectsthe speed of clicking and the song playing. Pressingboth [+] and [-] will reset the current tempo to itsdefault value (current song tempo).
Press the [hand perc] button to enter the handpercussion mode and the hand mode indicator will belit. The song number is 5 and the kit number is 21.
The metronome will run once a song is playing but withonly indicator flashing. Press the [click] button forhuman voice counting. Press [click] button twice forclicking sound. Press the click button again to turn offthe clicking.
Press the [demo] button to start or stop a demo songplaying. The 3-digit LED will display ‘dE’, you can alsopress [start / stop] button to stop the demo song fromplaying. When the demo song is playing, you can adjustthe tempo value
E11
Adjust TempoFunction
Metronome
HandPercussion
DemoFunction
Englis
h
Press the [reverb] button to enter the reverb function.In this menu, the digit on the far left of the LED willdisplay letter ‘R’. The two digits on the right will displaythe current reverb level. The select [+] / [-] buttons or[dial] can be used to adjust the reverb level (0-3, notloop). This value will be auto-saved after adjusted.
Prepare to RecordSelect the desired song, drum kit, tempo, drum offsetting, and reverb settings.
Press the [rec] button, the light will begin flashing.Press the [start/stop] button or strike the pad, thelight will stop flashing and the recording processbegins.
To stop recording, press the [start / stop] button or[rec] button. The record indicator will turn off. If thememory is full, "FL" will appear on the display and therecording process stops automatically.
When you start the recording, the vocal metronomealso starts to count. However the sound of the vocalwill not be recorded. To stop the metronome, press the[click] button.
Start Recording
Stop Recording
Note:
Pressing the [play/stop] button will start or stopplaying the recorded song.
When you record a new song, it will replace theprevious recording. The song data recorded will be lostwhen you turn off the power.
Note:
E12
PlaybackFunction
AdjustReverb Function
Record Function
Englis
h
The phones output supports a stereo headphones as an output device.
This appliance supports 1 hi-hat pedal and 1 kick pedal as input devices.
Englis
h
E13
MAKING THE CONECTIONS
Pedals
Phones Output
This appliance will output all the MIDI codes generatedby pad striking or pedal stepping via the MIDI outputconnector. Clicking and the MIDI codes in songs areexcluded. It also receives the MIDI data from anexternal device.
USBJack
PHONES KICK HI HAT USB 12V
PHONES KICK HI HAT USB 12V
Drum Pad:
Voices:
Drum Kits:
Song:
Display:
Connections:
Hand-Percussion:
Metronome:
Power Supply:
Dimension:(W x D x H)
Weight:
Accessories:
7 drum pads with touch sensitivity and two pedals (kickand hi-hat)
215 percussion voices and 128 GM voices, 8M bytesvoice data
25 preset drum kits, 5 user drum kits
100 preset songs (include 80 styles and 20 songs)
3-digit LED display
Headphones OutputUSB Jack (MIDI IN / OUT)
Use your hand to strike pads
2 different voices
AC adapter (DC 12V.)
19.7 x 14.6 x 6.2 inches /
7.26 lbs / 3.3 kgs
AC Adaptor (DC 12V)1 x Kick pedal1 x Hi-Hat pedal2 x Drum Stick1 x Headphone
50.0 x 37.0 x 15.7 cm
Englis
h
E14
SPECIFICATIONS
Specifications are typical, individual units might vary. They are subject to continuousimprovement without notice and without incurring any obligation.
Englis
h
E15
VOICE LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Kick KIT
Rock Kick 001
Rock Kick 002
Rock Kick 003
Standard Kick 001
Standard Kick 002
Standard Kick 003
Standard Kick 004
Pop Kick 001
Pop Kick 002
Pop Kick 003
Acoustic Kick 001
Acoustic Kick 002
Acoustic Kick 003
Acoustic Kick 004
Acoustic Kick 005
Acoustic Kick 006
Acoustic Kick 007
Acoustic Kick 008
Acoustic Kick 009
Acoustic Kick 010
Acoustic Kick 011
Snare KIT
Standard Snare 001
Standard Snare 002
Standard Snare 003
Standard Snare 004
Standard Snare 005
Standard Snare 006
Brush Snare 001
Brush Snare 002
Standard Stick 001
Standard Stick 002
Rock Snare 001
Rock Snare 002
Rock Snare 003
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
Acoustic Tom 004
Acoustic Tom 005
Acoustic Tom 006
Hihat KIT
Standard Hihat Close
Standard Hihat Pad
Standard Hihat Open
Analog Hihat Close
Analog Hihat Pad
Analog Hihat Open
Shakable
Rock Hihat Close
Rock Hihat Pad
Rock Hihat Open
Acoustic Hihat Close
Acoustic Hihat Pad
Acoustic Hihat Open
C ash KIT
Standard Crash001
Standard Crash002
Standard Crash003
Analog Ride001
China Crash
Splash001
Standard Ride 001
Rock Crash
Standard Ride 002
Electronic Crash
Splash002
Ride Bell
Panel KIT
Vibraslap
Hand
Tambourine
Stcowb
Mutecowb
r
Pop Snare 001
Pop Snare 002
Pop Snare 003
Acoustic Snare 001
Acoustic Snare 002
Acoustic Snare 003
Acoustic Snare 004
Acoustic Snare 005
Tom KIT
Standard Tom 001
Standard Tom 002
Standard Tom 003
Standard Tom 004
Standard Tom 005
Standard Tom 006
Room Tom 001
Room Tom 002
Room Tom 003
Room Tom 004
Room Tom 005
Room Tom 006
Electronic Tom 001
Electronic Tom 002
Electronic Tom 003
Electronic Tom 004
Electronic Tom 005
Electronic Tom 006
Analog Tom 001
Analog Tom 002
Analog Tom 003
Analog Tom 004
Analog Tom 005
Analog Tom 006
Acoustic Tom 001
Acoustic Tom 002
Acoustic Tom 003
NO.. NAME NO.. NAMENO.. NAME
E16
VOICE LIST
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
Mute Hi Conga
Open Hi Conga
Low Conga
Hi Bongo
Low Bongo
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Shaker
Claves
Mute Triangle
Open Triangle
Short Guiro
Long Guiro
Mute Cuica
Open Cuica
Mute Surdo
Open Surdo
Maracas
HighQ
Slap
Scratch Push
Scral
On
Two
Three
Four
Cartoon001
Cartoon002
Cartoon003
Cartoon004
Cartoon005
Cartoon006
Laugh
e
Metronome1
Metronome2
NO.. NAME NO.. NAMENO.. NAME
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
SFX033
SFX034
SFX035
SFX036
SFX037
SFX038
SFX039
SFX040
SFX041
SFX042
SFX043
SFX044
SFX045
SFX046
SFX047
SFX048
SFX049
SFX050
SFX051
SFX052
SFX053
SFX054
SFX055
SFX056
SFX057
SFX058
SFX059
SFX060
SFX061
SFX062
SFX063
SFX064
SFX065
SFX066
SFX067
SFX068
SFX069
SFX070
Tambourine001
Tambourine002
Tambourine003
Tambourine004
Tambourine005
Sfx KIT
SFX001
SFX002
SFX003
SFX004
SFX005
SFX006
SFX007
SFX008
SFX009
SFX010
SFX011
SFX012
SFX013
SFX014
SFX015
SFX016
SFX017
SFX018
SFX019
SFX020
SFX021
SFX022
SFX023
SFX024
SFX025
SFX026
SFX027
SFX028
SFX029
SFX030
SFX031
SFX032
Englis
h
E17
DRUM KIT LIST
SONG LIST
NO. NAME NO. NAME
01 Pop1 16 Jazz2
02 Pop2 17 Funk
03 Standard 1 18 Clave
04 Room 19 Drum Bass
05 Rock 1 20 Hip Hop
06 Electronic 21 Conga1
07 Analog 22 Conga2
08 Jazz 1 23 Timbales
09 Brush 24 Latin
10 Standard 2 25 Funk
11 Rock2 26 User 1 (pop1)
12 Boss 27 User 2 (pop2)
13 Rock3 28 User 3 (Standard1)
14 Standard 3 29 User 4 (Room)
15 Rock4 30 User 5 (Rock1)
01
03
02
05
21
21
21
01
03
04
05
03
01
02
05
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Intro
8 Beat2
8 Beat3
8 Beat4
8 Beat5
8 Beat Ballad1
8 Beat Ballad2
8 Beat Ballad3
Soft Rock
Rock1
Rock2
Rock3
Rock4
Rock5
Hard Rock1
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
NO.. NAMEKIT BEAT
8 Beat
07
03
01
07
04
02
01
21
21
05
03
01
03
01
05
17
18
19
20
21
22
23
24
25
26
27
28
29
30
16
16 Beat 1
16 Beat 2
16 Beat 3
16 Beat 4
16 Beat 5
16 Beat 6
16 Beat 7
16 Beat Ballad 1
16 Beat Ballad 2
16 Beat Ballad 3
16 Beat Ballad 4
16 Beat Ballad 5
16 Beat Funk 1
16 Beat Funk 2
Hard Rock2
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
NO.. NAMEKIT BEAT
Intro
Englis
h
Englis
h
E18
SONG LIST
07
07
01
06
04
07
09
09
08
03
01
03
12
02
03
02
01
01
03
01
03
12
09
04
03
01
03
02
03
01
05
04
03
03
04
01
04
03
05
03
05
05
01
03
07
03
03
23
12
12
03
01
03
03
12
12
12
12
01
01
03
02
03
31
32
33
34
35
36
67
68
69
37
38
39
70
71
72
73
74
75
76
77
78
79
80
40
41
42
43
44
45
46
47
48
49
50
51
52
53
81
82
83
84
85
86
87
88
89
54
55
56
57
58
59
60
61
62
63
64
65
66
90
91
92
93
Dance 1
Dance 2
Dance 3
Dance 4
Dance 5
Dance 6
Swing 1
Swing 2
Swing 3
Rap 1
Rap 2
Rap 3
Waltz
3/4 Ballad
Swing Blues
Blues
March 1
March 2
R&B
Hip-Hop
Funk
Country
Big Band
Bounce 1
Bounce 2
Bounce 3
Shuffle 1
Shuffle 2
Shuffle 3
Shuffle 4
Shuffle 5
Shuffle 6
Shuffle 7
Slow Rock 1
Slow Rock 2
Slow Rock 3
Slow Rock 4
8 Beat 1
8 Beat 2
Ballad
Hard Rock 1
Hard Rock 2
Hard Rock 3
Pop Dance 1
Pop Dance 2
R&B
Reggae 1
Reggae 2
Bossa Nova 1
Bossa Nova 2
Samba
Salsa
Latin Rock
Cha-Cha
Mambo
Rhumba 1
Rhumba 2
Rhumba 2
Tango
16 beat
Fusion
Funk 1
Funk 2
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
NO.. NO..NAME NAMEKIT KITBEAT BEAT
Dance Swing
Rap
Others
Bounce
Shuffle
Slow Rock
Latin
16 beat
8beat
Funk
Shuffle
04
03
03
01
94
95
96
97
Shuffle 1
Shuffle 2
16 Beat Shuffle
16 Beat Triplet
4/4
4/4
4/4
4/4
Others
03
12
08
98
99
100
Reggae
Bossa Nova
Big Band
4/4
4/4
4/4
Remarks
Bank selectModulationPortamento timeVolumePanExpressionRhythm allocationSustain PedalPortamento on/offSostenuto PedalSoft PedalReverb ProgramChorus ProgramReverb levelChorus levelAll Sound OffReset all controllersAll notes off
O 9nH,V=1-127X (9nH,V=0)
Transmitted Recognized
10chX
27-88
Function
Basic
Channel
Mode
System Exclusive
Pitch Bend
Velocity
Program
Change
Control
System
Common
Note
Number
Key sCh s
''
ClockCommandsStartStop
Aux
Messages
1-16chX
0 - 1270 - 127
O 9nH,V=1-127X (9nH,V=0;
8nH,V=0 -127)
X000
0
00 - 127
0
XX
**********
XXX
**********
DefaultChanged
DefaultMessagesAltered
True voice
Note onNote off
After
Touch
01571011206465666780819193120121123
True
Song PositionSong SelectTune
Clock
Real Time
LOCAL ON/OFFAll Notes OffActive SenseReset
XX
XX
X
XXXXXXXXXXXXXXXXXX
XX
**********
XXX
XXX
XX
XXXX
XX
000000000000000000
Englis
h
E19
MIDI IMPLEMENTATION CHART
Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO 0 : YESMode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO X : NO
TRANSPORTE Y MANEJO
LIMPIEZA
INTERFERENCIA ELECTRÍCA
Jamás aplique fuerza excesiva a los controles,conectores u otras partes del instrumento.Siempre desconecte los cables tomando elenchufe de una manera firme, sin jalar el cable.Desconecte todos los cables antes de mover elinstrumento.Golpes fuertes al instrumento ocasionados porcaída, o por haber colocado objetos pesadosencima del instrumen, puede resultar engraves daños.
Limpie la unidad con un paño suave y seco.Un paño poco húmedo se podría usar pararemover torpe grasitud o mugre.Nunca use solventes / limpiadores comoalcohol o thinner.Evite poner objetos de vinyl encima de la unidad(el vinyl puede pegarse y decolorar lasuperficie).
Este instrumento contiene un sistema decircu i tos dig i ta les que pueden causarinterferencias sí este se encuentra cerca alradio o televisor. Si esto ocurre, coloque elinstrumento lejos del equipo afectado.
•
•
•
••
•
•
•
•
POSICIÓN
No exponga la unidad a las siguientessituaciones para evitar la deformación,decoloración o daños más graves.Luz del sol directa.Temperatura alta (cerca de un aparato queproduce calor, o dentro de un auto por el día).Humedad excesiva.Polvo excesivo.Vibraciones fuertes.
Ponga el interruptor en OFF cuando no se estéusando el instrumento.El adaptador de AC debe estar desconectadodel tomacorriente de AC si es que elinstrumento no se va a usar por un largoperíodo de tiempo.Desconecte el adaptador de AC durante lastormentas de relámpagos.Evite enchufar el adaptador de AC en el mismotomacorriente que un aparato de alto consumode electricidad, tales como calentadoreseléctricos y hornos. Evite también el uso deadaptadores de enchufes múltiples, ya que esopuede resultar en reducción de la calidad delsonido, en errores de operación y dañosposibles.
MÓDULO DE ALIMENTACIÓN
•
••
•••
•
•
•
•
•
DESCONECTAR (OFF) CUANDO SE HAGA
CONEXIÓN
Para evitar da os a la unidad y a otroselectrodomésticos a los cuales esté conectada,apague (OFF) todos los switches antes deconectar o desconectar los cables.
ñ
Gracias por haber comprado su equipo de Batería Digital Portátil SOUNDX. Esta Batería Digital ha sido elaboradapara poderse usar con facilidad. Antes de usar este instrumento, le recomendamos que lea este manualcuidadosamente.
Para el mejor uso de su Batería Digital, por favor siga las instrucciones para el mantenimiento a continuación.
El cuidado de su Batería Digital Portátil
S02
ESTE DISPOSITIVO ESTÁ EN CONFORMIDAD CON LA PARTE 15 DE LAS REGLAS DEFCC. EL FUNCIONAMIENTO ESTA SUJETO A LAS SIGUIENTES DOS CONDICIONES:(1) ESTE DISPOSITIVO NO PUEDE CAUSAR INTERFERENCIA DAÑINA, Y(2) ESTE DISPOSITIVO DEBE ACEPTAR CUALQUIER INTERFERENCIA RECIBIDA,INCLUSO INTERFERENCIA QUE PUEDA CAUSAR MAL FUNCIONAMIENTO.
Esp
añol
¡Felicitaciones!
Tablero De Control
Funcionamiento
Configuración
Funciones
Ajustar la función de Reverb
........................................................................................4
......................................................................................... 10
...................................................................... 13
....................................................................................... 14..................................................................................... 15 - 16
.................................................................................... 17
............................................................................. 17 - 18........................................................................ 19
- ......................................................................................... 4- ........................................................................................... 5
- .............................................................................. 6- ............................................................................................... 6- ..................................................................................... 6
- Seleccione un Kit de Percusión ...................................................................... 7- Establecer Pista de Voz ................................................................................ 7- Establecer Volumen de Pista ......................................................................... 7- Establecer Alcance de Pista .......................................................................... 8
- .................................................................................... 10- Ajuste el Volumen Principal ......................................................................... 10- Ajuste el Volumen de Acompañamiento ......................................................... 10- Apagado de Percusión ................................................................................ 10- Ajustar la Función de Tempo ....................................................................... 11- Metrónomo ............................................................................................... 11- Percusión Manual ....................................................................................... 11- ....................................................................................... 11
- Los Pedales .............................................................................................. 13- Salida Para Auriculares .............................................................................. 13- USB Gato ................................................................................................. 13
............................................................................................... 6
..................................................................................................... 7
- Establecer Rendimiento de Pista .................................................................... 8- Guardar Kit ................................................................................................. 9
- ........................................................................ 12- ..................................................................................... 12- .................................................................................... 12
Reproducir Canción
Reproducir CanciónFunción Reproducir
Cómo Hacer Las Conexiones
Detalles Técnicos
Lista De Voice
Lista De Drum Kits
Lista De Canciones
Tabla De Ejecución De MIDI
Tablero DelanteroTablero de Atrás
Uso con el Adaptador ACUso con PilasUso con Auriculares
Función de Demo
S03
ÍNDICE DE MATERIAS
Esp
añol
Botón
Interruptor [ Power on off ]
Botón [ Play / Stop ]
Botón Indicador del LED
Botón Indicador del LED
Botón
Botón
Botón
Esta botón se puede usar para SUBIR O BAJARel volumen principal.
Este interruptor enciende / apaga la unidad.
Este botón se usa para empezar o parar detocar la grabación
Este botón se usa para empezar o parar degrabar
Este botón se usa para encender o apagar elmetrónomo
Este botón se usa para cambiar el nivel dereverberación
Este bótón se usa para entrar en el menú de kits
Este botón se usa para entrar en el menú devoz o volumen
Este LED es el dispositivo principal devisualización que le mostrará los parametros delmenú actual
[ Master Volume + & - ]
[ REC ] e
[ Click ] e
[ Reverb ]
[ Kit ]
[ Pad Assign ]
3-Digit LED
.
.
.
.
.
.
.
Botón
Botón Indicador delLED
Botón Indicador del LED
Botón
Botón
Botones
Botón
Este botón se usa para entrar en el menú decanciones
Este botón se utiliza para girar la función de lapercusión de la mano
Este botón se utiliza para permitir o parainhabilitar la función del tambor al escuchartodas las canciones
Estos botones se utilizan para cambiar losvalores (número de kit, número de la voz,número de la canción, etc.) al corregir
Este botón se utiliza para guardar todo el kitactual que fija a un kit del usuario
Estos botones se pueden utilizar para cambiarel volumen del acompañamiento
Estos botones se usan para cambiar el ritmoactual
Este botón se utiliza para cambiar los valores(número de kit, número de la voz, número de
[ Song ]
[ Hand Percussion ] e
[ Drum OFF ] e
[ Select + & - ]
[ Save ]
[ Acc Volume + & - ]
Botones [ Tempo + & - ]
[ Dial ]
.
.
.
.
.
.
S04
5
1
2
3
4
6
7
9
14
13
12
11
1 2 3 4 5 6 7 8 9 10 11 13121 14
15 16 17 1918 20 21 22
DRUM PAD (x7)
8
10
17
16
15
23
Esp
añol
TABLERO DE CONTROL
Tablero Delantero
Terminal de Auriculares
Terminales de entrada del pedal [ KICK / HI-HAT ]
Terminal DC
Este terminal se usa para conectar los auricularesConectar los auriculares no silenciará los terminales de salida
Terminales de entrada de pedales Kick y Hi-Hat
Este puerto se utiliza para conectar todo el dispositivo externo.
Se conecta a un adaptador de corriente DC 12VTal como se indica en la PÁGINA S06
.( )
.( )
.
.
Terminal USB
Botón
Botón
Altoparlantes
Este botón se utiliza para cambiar lacacerola de todo el tambor
Este botón se utiliza para cambiar elvolumen del tambor
[ Pan ]
.
.
[ Volume ]
Botón [ Start Stop ]
Botón [ Demo ]
Botón
Este botón se puede usar para empezar oparar de tocar todas las canciones
Este botón se usa para empezar o pararuna canción de demostración
Este botón se utiliza para cambiar elaumento del tambor
.
.
[ Gain ]
.
S05
Tablero de Atrás
21
22
20
19
18
23
24 25 26 27
24
25
26
27
Para conectar los pedales de control para el pie [ 1 & 2 ]
Nota
Los pedales que se incluyen se pueden conectar a la unidad para tocar las voces hi-hat o bassdrum de la batería simultáneamente. También se les puede asignar que toquen otras voces
No presione el pedal mientras lo está conectando a la unidad o mientras enciende la corriente.[Al conectarlo de esta manera con la unidad encendida, la función del pedal pudiera invertirse
.
.)
:
PHONES KICK HI HAT USB 12V
Esp
añol
Tablero Delantero
TABLERO DE CONTROL
CONFIGURACIÓN
Módulo de Alimentación
Su batería digital trabajará con pilas o con el adaptador de corriente que está incluido. Siga lasinstrucciones a continuación de acuerdo con el tipo de corriente que piensa usar.
Uso con el Adaptador ACConecte el adaptador de corriente al terminal DCIN situado en el tablero de atrás de la unidad, yenchufe el adaptador de corriente AC en eltomacorriente de AC.
No use otro adaptador excepto el que está indicado.La descripción técnica del adaptador es DC 12V desalida, de tipo centro positivo.
Uso con PilasAbra la tapa del compartimiento de las pilasdebajo de la unidad
Introduzca seis pilas de tamaño “C”, R14SUM-2, o su equivalente. Al poner las pilas,siga las marcas de polaridad en la ilustración
Le sugerimos que use pilas alcalinas
Cierre firmemente el compartimiento de laspilas
Nota:
1..
2.
..
3..
Uso con Auriculares
Unos auriculares estereofónicos opcionales puedenconectarse al terminal PHONES/OUTPUT, situado en eltablero de atrás. Cuando los auriculares estén conectados alterminal, los altoparlantes internos de la unidad se apagaránautomáticamente [perfecto para practicar en privado o paratocar por la noche si es tarde]. Si usted prefiere usar elsistema externo de sonido, el terminal para auricularestambién se puede usar para conectar la batería digital a unsistema estereofónico o una consola mezcladora
Corte la corriente a todos los equipos antes dehacer cualquier conexión
.
.Nota:
S06
NOTA
La alimentación eléctrica automáticamente pasará por el adaptador AC, si se conecta un adaptador AC opcionalmientras hay pilas instaladas en el instrumento
Se le recomienda que cambie las pilas gastadas tan pronto como sea posible. Cuando baja el voltaje de las pilas, seoscurece el visualizador y / o el sonido se distorsiona. Cuando esto ocurra, cambie las pilas por un juego completode seis pilas nuevas, todas del mismo tipoNUNCA mezcle las pilas nuevas con las viejas; tampoco use tipos diferentes de pilas [alcalinas, de magnesio, etc.], opilas de marcas distintas, o las que son de la misma marca pero de tipos distintos. El uso incorrecto pudiera causarrecalentamiento del instrumento, resultar en un incendio, o causar que las pilas suelten sustancias químicasTambién para evitar daños causados por pilas echadas a perder, saque todas las pilas del instrumento cuando no lova a usar por un largo tiempoSi se instalan las pilas en este instrumento y éste no se usa por un período largo, perderán su potencia
PRECAUCIÓN
:
•
•
•
•
•
.
.
.
..
:
Esp
añol
El menú del kit es el menú por defecto al encender launidad; el valor por defecto es 001.
Pulse el botón [kit] para acceder a un menú de kit. ElLED de 3 dígitos mostrará el número de kit actual conel indicador de menú correspondiente iluminado, comose muestra en la ilustración. Los botones de selección[+] / [-] o [dial] pueden usarse para seleccionarcualquier kit (1-30, bucle) como kit actual.
Pulse el botón [volumen] para acceder al menú deasignación de pista. Si se selecciona el menú deas ignac ión de p is ta, e l ind icador de menúcorrespondiente se encenderá.
En este menú, el LED de 3 dígitos mostrará el volumende la pista actual, que puede seleccionarse pulsando elbotón de pista en el panel superior o pulsando la pista.Los botones de selección [+] / [-] o [dial] puedenusarse para seleccionar el volumen (0-9, bucle) para lapista actual.
Pulse el botón de asignación de pista para acceder almenú de asignación de pista. El valor por defecto seráel valor de voz de la pista según los distintos kitseleccionados. Por ejemplo, si se ha seleccionado el kit001 y se pulsa la asignación de pista, el valor del LEDserá 96, ya que este es el valor de voz en la pista.
Si se selecciona el menú de asignación de pista, la vozcorrespondiente estará indicada en el LED.
En este menú, el LED de 3 dígitos mostrará el númerode voz en la pista actual, que puede seleccionarsepulsando este botón de pista en el panel superior opulsando la pista. Los botones de selección [+] / [-] o[dial] pueden usarse para seleccionar cualquier botónde voz (1-215, bucle) para la pista actual.
S07
Seleccione un Kit de Percusión
EstablecerPista de Voz
EstablecerVolumen de Pista
FUNCIONES
Esp
añol
EstablecerAlcance de Pista
Pulse el botón [desplazar] para acceder al menú deasignación de pista. Si se selecciona el menú deas ignac ión de p is ta, e l ind icador de menúcorrespondiente se encenderá.
En este menú, el LED de 3 dígitos mostrará el alcancede la pista actual, que puede seleccionarse pulsando elbotón de pista en el panel superior o pulsando la pista.Los botones de selección [+] / [-] o [dial] puedenusarse para seleccionar el alcance (0-9, bucle) para lapista actual.
S08
EstablecerRendimiento de Pista
Pulse el botón [rendimiento] para acceder al menú deasignación de pista. Si se selecciona el menú deas ignac ión de p is ta, e l ind icador de menúcorrespondiente se encenderá.
En este menú, el LED de 3 dígitos mostrará elrendimiento de la pista actual, que puede seleccionarsepulsando el botón de pista en el panel superior opulsando la pista. Los botones de selección [+] / [-] o[dial] pueden usarse para seleccionar el rendimiento(0-9, bucle) para la pista actual.
Esp
añol
GuardarKit
Pulse el botón [guardar] para acceder al menú deguardado de kit. Los botones de selección [+]/[-] o[dial] pueden usarse para seleccionar un kit de usuario(21-30, bucle) en la configuración de kit actual.Durante la selección del kit, el número del kit deusuario parpadeará.
Pulse el botón [guardar] de nuevo; la configuración dekit actual se guardará en el kit seleccionado. La unidadsaldrá del menú de kit y seleccionará el kit como actualsi todos los datos se han guardado correctamente.
Si el guardado ha fallado por un error, se mostrará‘Err’ en el LED.
Las configuraciones de kit no guardadas se perderáncuando se cambie el kit.
Nota:
S09
Esp
añol
En el menú de volumen principal, el dígito en el ladoizquierdo del LED mostrará la letra ‘L’. Los dos dígitosdel lado derecho mostrarán el volumen actual. Losbotones de selección [+] / [-] o [dial] pueden usarsepara ajustar el volumen (0-9, sin bucle). Este valor seguardará después del ajuste.
En el menú de volumen de acompañamiento, el dígitoen el lado izquierdo del LED mostrará la letra ‘A’. Losdos dígitos del lado derecho mostrarán el volumen deacompañamiento actual. Los botones de selección[+]/[-] o [dial] pueden usarse para ajustar el volumen(0-9, sin bucle). Este valor se guardará después delajuste.
Pulse el botón [canción] para acceder a un menú decanción. El valor por defecto es 001. El LED de 3dígitos mostrará el número de canción actual con elindicador de menú correspondiente iluminado. Losbotones de selección [+] / [-] o [dial] pueden usarsepara seleccionar la canción actual (1-100, bucle). Siestá reproduciendo un bucle estilo de los primeros 80,pulse el botón [inicio / detener] para iniciar o detenerla canción. Si se cambia la canción durante lareproducción, la nueva canción no comenzará hastaterminar la medición actual.
Cada canción tiene su tempo y kit de percusión pordefecto; el reproductor comenzará con el kit y tempoactuales, desde el principio de la reproducción.
S10
FUNCIONAMIENTO
Reproducir Canción
Ajuste el Volumen Principal
Ajuste el Volumen de Acompañamiento
Pulsando el botón [apagar percusión] activará odesactivará la función de apagado de percusióndurante la reproducción de una canción. Si el apagadode percusión está activado, el sonido de percusión seapagará y el indicador de apagado de percusión seencenderá. Esta función es muy útil para practicar.
Apagadode Percusión
Esp
añol
Pulse los botones [+] y [-] de tempo para acceder almenú de tempo. Los botones [+] y [-] pueden usarsepara cambiar el tempo actual (30-280, sin bucle), queafectan a la velocidad del marcado y de la canción enreproducción. Pulsar a la vez [+] y [-] restablecerá eltempo al valor por defecto (tempo de canción actual).
Pulse el botón [percusión manual] para acceder almodo de percusión manual y se encenderá el indicadorde modo manual. El número de canción es el 5 y elnúmero de kit el 21.
El metrónomo se pondrá en marcha cuando haya unacanción en reproducción, pero solamente con elindicador parpadeando. Pulse el botón [marcar] paracontar la voz humana. Pulse el botón [marcar] dosveces para el sonido de marcado. Pulse de nuevo elbotón [marcar] para apagar el marcado.
Pulse el botón [demo] para iniciar o detener unareproducción de canción de demostración. El LED de 3dígitos mostrará ‘dE’, también puede pulsar el botón[inicio/detener] para detener la reproducción de lacanción de demostración. Cuando se reproduzca lacanción de demostración, puede ajustar el valor detempo.
S11
Ajustar la Función de Tempo
Metrónomo
Percusión Manual
Función de Demo
Esp
añol
Presionar el botón [del reverb] para incorporar la funcióndel reverb. En este menú, el dígito en dejado lejos del LEDexhibirá el `R de la letra'. Los dos dígitos a la derechaexhibirán el nivel actual del reverb. Selecto [+] / [-] losbotones o [dial] se pueden utilizar para ajustar el nivel delreverb (0-3, no lazo). Este valor será salvadoautomáticamente después de ajustado.
Preparación Para GrabarSeleccione la canción, kit de percusión, tempo,configuración de percusión apagada, y configuración dereverberación deseados.
Pulse el botón [grabar], la luz comenzará a parpadear.Pulse el botón [inicio/detener] o pulse el teclado, la luzdejará de parpadear y el proceso de grabacióncomenzará.
Para detener la grabac ión, pu lse e l botón[inicio/detener] o el botón [grabar] El indicador degrabación se apagará. Si la memoria está llena,aparecerá “FL” en pantalla y el proceso de grabación seapagará automáticamente.
Cuando inicie la grabación, el metrónomo de voztambién comienza a contar. Sin embargo, el sonido dela voz no se grabará. Para detener el metrónomo,pulse el botón [marcar].
Iniciar la Grabación
Detener la Grabación
Nota:
Pulse el botón [reproducir/detener] para iniciar odetener la reproducción de la canción.
Cuando grabe una nueva canción, borrará la grabaciónanterior. Los datos de canción grabados se perderáncuando apague.
Nota:
S12
Función Reproducir
Ajustar la función de Reverb
Reproducir Canción
Esp
añol
La salida para auriculares soporta auriculares estereofónicos como dispositivo de salida.
Este aparato soporta 1 pedal hi-hat y 1 pedal kick como dispositivos de entrada.
S13
CÓMO HACER LAS CONEXIONES
Los Pedales
Salida Para Auriculares
Este aparato emitirá todos los códigos MIDI generadospulsando el teclado o el pedal mediante el conector desalida MIDI. El marcado y los códigos MIDI en lascanciones están excluidos. También recibe datos MIDIde un dispositivo externo.
USB Gato
PHONES KICK HI HAT USB 12V
PHONES KICK HI HAT USB 12V
Esp
añol
Drum Pad:
Voices:
Drum Kits:
:
Power Supply:
Dimension:
(W x D x H)
:
:
:
:
:
:
Canciones
Visualizador
Conexiones
Metrónomo
Peso
Accesorios
Mano-
Percusión
7 drum pads con sensibilidad al tacto y dos pedales[kick y hi-hat]
25 drum kits preprogramados + 5 drum kit hecho a laorden
100 canciones preprogramadas[se incluyen 80 estilos y 20 canciones]
Visualizador LED de 3 dígitos
Enchufe de salida para auriculares
2 voces distintas
Adaptador AC [DC 12V.]
pulgadas
Adaptador AC [DC 12V]pedal Kickpedal Hi-Hatbaquetasauriculares
215 voces y 128 voces del GM, octetos de la percusiónde los 8M expresan datos
Utilizar tu mano para pulsar los cojines
USB Gato (MIDI IN / OUT)
19.7 x 14.6 x 6.2 /
7.26 lbs / 3.3 kgs
50.0 x 37.0 x 15.7 cm
1 x1 x2 x1 x
S14
DETALLES TÉCNICOS
Los detalles técnicos son típicos; unidades individuales pueden tener variaciones. Estánsujetos a mejorías constantes sin previo aviso y sin incurrir en ninguna obligación.
Esp
añol
S15
LISTA DE VOICE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Kick KIT
Rock Kick 001
Rock Kick 002
Rock Kick 003
Standard Kick 001
Standard Kick 002
Standard Kick 003
Standard Kick 004
Pop Kick 001
Pop Kick 002
Pop Kick 003
Acoustic Kick 001
Acoustic Kick 002
Acoustic Kick 003
Acoustic Kick 004
Acoustic Kick 005
Acoustic Kick 006
Acoustic Kick 007
Acoustic Kick 008
Acoustic Kick 009
Acoustic Kick 010
Acoustic Kick 011
Snare KIT
Standard Snare 001
Standard Snare 002
Standard Snare 003
Standard Snare 004
Standard Snare 005
Standard Snare 006
Brush Snare 001
Brush Snare 002
Standard Stick 001
Standard Stick 002
Rock Snare 001
Rock Snare 002
Rock Snare 003
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
Acoustic Tom 004
Acoustic Tom 005
Acoustic Tom 006
Hihat KIT
Standard Hihat Close
Standard Hihat Pad
Standard Hihat Open
Analog Hihat Close
Analog Hihat Pad
Analog Hihat Open
Shakable
Rock Hihat Close
Rock Hihat Pad
Rock Hihat Open
Acoustic Hihat Close
Acoustic Hihat Pad
Acoustic Hihat Open
C ash KIT
Standard Crash001
Standard Crash002
Standard Crash003
Analog Ride001
China Crash
Splash001
Standard Ride 001
Rock Crash
Standard Ride 002
Electronic Crash
Splash002
Ride Bell
Panel KIT
Vibraslap
Hand
Tambourine
Stcowb
Mutecowb
r
Pop Snare 001
Pop Snare 002
Pop Snare 003
Acoustic Snare 001
Acoustic Snare 002
Acoustic Snare 003
Acoustic Snare 004
Acoustic Snare 005
Tom KIT
Standard Tom 001
Standard Tom 002
Standard Tom 003
Standard Tom 004
Standard Tom 005
Standard Tom 006
Room Tom 001
Room Tom 002
Room Tom 003
Room Tom 004
Room Tom 005
Room Tom 006
Electronic Tom 001
Electronic Tom 002
Electronic Tom 003
Electronic Tom 004
Electronic Tom 005
Electronic Tom 006
Analog Tom 001
Analog Tom 002
Analog Tom 003
Analog Tom 004
Analog Tom 005
Analog Tom 006
Acoustic Tom 001
Acoustic Tom 002
Acoustic Tom 003
NO.. NAME NO.. NAMENO.. NAME
Esp
añol
S16
LISTA DE VOICE
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
Mute Hi Conga
Open Hi Conga
Low Conga
Hi Bongo
Low Bongo
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Shaker
Claves
Mute Triangle
Open Triangle
Short Guiro
Long Guiro
Mute Cuica
Open Cuica
Mute Surdo
Open Surdo
Maracas
HighQ
Slap
Scratch Push
Scral
On
Two
Three
Four
Cartoon001
Cartoon002
Cartoon003
Cartoon004
Cartoon005
Cartoon006
Laugh
e
Metronome1
Metronome2
NO.. NAME NO.. NAMENO.. NAME
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
SFX033
SFX034
SFX035
SFX036
SFX037
SFX038
SFX039
SFX040
SFX041
SFX042
SFX043
SFX044
SFX045
SFX046
SFX047
SFX048
SFX049
SFX050
SFX051
SFX052
SFX053
SFX054
SFX055
SFX056
SFX057
SFX058
SFX059
SFX060
SFX061
SFX062
SFX063
SFX064
SFX065
SFX066
SFX067
SFX068
SFX069
SFX070
Tambourine001
Tambourine002
Tambourine003
Tambourine004
Tambourine005
Sfx KIT
SFX001
SFX002
SFX003
SFX004
SFX005
SFX006
SFX007
SFX008
SFX009
SFX010
SFX011
SFX012
SFX013
SFX014
SFX015
SFX016
SFX017
SFX018
SFX019
SFX020
SFX021
SFX022
SFX023
SFX024
SFX025
SFX026
SFX027
SFX028
SFX029
SFX030
SFX031
SFX032
Esp
añol
S17
LISTA DE DRUM KITS
LISTA DE CANCIONES
NO. NAME NO. NAME
01 Pop1 16 Jazz2
02 Pop2 17 Funk
03 Standard 1 18 Clave
04 Room 19 Drum Bass
05 Rock 1 20 Hip Hop
06 Electronic 21 Conga1
07 Analog 22 Conga2
08 Jazz 1 23 Timbales
09 Brush 24 Latin
10 Standard 2 25 Funk
11 Rock2 26 User 1 (pop1)
12 Boss 27 User 2 (pop2)
13 Rock3 28 User 3 (Standard1)
14 Standard 3 29 User 4 (Room)
15 Rock4 30 User 5 (Rock1)
01
03
02
05
21
21
21
01
03
04
05
03
01
02
05
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Intro
8 Beat2
8 Beat3
8 Beat4
8 Beat5
8 Beat Ballad1
8 Beat Ballad2
8 Beat Ballad3
Soft Rock
Rock1
Rock2
Rock3
Rock4
Rock5
Hard Rock1
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
NO.. NAMEKIT BEAT
8 Beat
07
03
01
07
04
02
01
21
21
05
03
01
03
01
05
17
18
19
20
21
22
23
24
25
26
27
28
29
30
16
16 Beat 1
16 Beat 2
16 Beat 3
16 Beat 4
16 Beat 5
16 Beat 6
16 Beat 7
16 Beat Ballad 1
16 Beat Ballad 2
16 Beat Ballad 3
16 Beat Ballad 4
16 Beat Ballad 5
16 Beat Funk 1
16 Beat Funk 2
Hard Rock2
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
NO.. NAMEKIT BEAT
Intro
Esp
añol
S18
LISTA DE CANCIONES
07
07
01
06
04
07
09
09
08
03
01
03
12
02
03
02
01
01
03
01
03
12
09
04
03
01
03
02
03
01
05
04
03
03
04
01
04
03
05
03
05
05
01
03
07
03
03
23
12
12
03
01
03
03
12
12
12
12
01
01
03
02
03
31
32
33
34
35
36
67
68
69
37
38
39
70
71
72
73
74
75
76
77
78
79
80
40
41
42
43
44
45
46
47
48
49
50
51
52
53
81
82
83
84
85
86
87
88
89
54
55
56
57
58
59
60
61
62
63
64
65
66
90
91
92
93
Dance 1
Dance 2
Dance 3
Dance 4
Dance 5
Dance 6
Swing 1
Swing 2
Swing 3
Rap 1
Rap 2
Rap 3
Waltz
3/4 Ballad
Swing Blues
Blues
March 1
March 2
R&B
Hip-Hop
Funk
Country
Big Band
Bounce 1
Bounce 2
Bounce 3
Shuffle 1
Shuffle 2
Shuffle 3
Shuffle 4
Shuffle 5
Shuffle 6
Shuffle 7
Slow Rock 1
Slow Rock 2
Slow Rock 3
Slow Rock 4
8 Beat 1
8 Beat 2
Ballad
Hard Rock 1
Hard Rock 2
Hard Rock 3
Pop Dance 1
Pop Dance 2
R&B
Reggae 1
Reggae 2
Bossa Nova 1
Bossa Nova 2
Samba
Salsa
Latin Rock
Cha-Cha
Mambo
Rhumba 1
Rhumba 2
Rhumba 2
Tango
16 beat
Fusion
Funk 1
Funk 2
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
NO.. NO..NAME NAMEKIT KITBEAT BEAT
Dance Swing
Rap
Others
Bounce
Shuffle
Slow Rock
Latin
16 beat
8beat
Funk
Shuffle
04
03
03
01
94
95
96
97
Shuffle 1
Shuffle 2
16 Beat Shuffle
16 Beat Triplet
4/4
4/4
4/4
4/4
Others
03
12
08
98
99
100
Reggae
Bossa Nova
Big Band
4/4
4/4
4/4
Esp
añol
Remarcado
O 9nH,V=1-127X (9nH,V=0)
Transmitido Recognized
10chX
27-88
Funcion
BásicoCanal
Modo
Exclusiva del Sistema
Pitch Bend
Velocidad
Cambio dePrograma
Control
Sistema
Común
NotaNúmero
LlavesCanales
RelojComandosStartStop
Aux
Mensajes
1-16chX
0 - 1270 - 127
O 9nH,V=1-127X (9nH,V=0;
8nH,V=0 -127)
X000
0
00 - 127
0
XX
**********
XXX
**********
DefectoCambiado
DefectoMensajesAlterado
Voz real
Notas activadasNotas desactivadas
DespuesToque
01571011206465666780819193120121123
Verdaadero
Posición de la canciónSelector de canciónTono
RelojTiempo Real
Local ON / OFFTodas las notas OFFSensores ActivosResetear
XX
XX
X
XXXXXXXXXXXXXXXXXX
XX
**********
XXX
XXX
XX
XXXX
XX
000000000000000000
S19
TABLA DE EJECUCIÓN DE MIDI
Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO 0 : SIMode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO X : NO
Esp
añol
Banco SelectoModulaciónTiempo de PortamentoVolumenCacerolaExpresiónAsignación del ritmoSostener el PedalPortamento con./desc.Pedal de SostenutoPedal SuavePrograma de ReverbPrograma del EstribilloNivel de ReverbNivel del EstribilloTodo el Sonido Apagado
All Notes OffReajustar Todos los Reguladores
MANIEMENT ET TRANSPORT
NETTOYER
INTERFÉRENCE ÉLECTRIQUE
•
•
•
•
•
•
•
•
•
Ne pas exercer de pression aux parties decontrô le , de connect ions ou d ’autreséléments de l’instrument.Toujours débrancher en tenant la prisefermement et non en tirant sur le câble.Débrancher tous les câbles avant dedéplacer l’instrument.Des coups physiques causés par des chutes,ou en p laçant des ob jets lourds surl’ instrument il pourrait se produire deséraflures ou des dégâts plus importants.
Nettoyer l’ensemble avec un chiffon sec etdoux.Utilisez un chiffon légèrement humide pourôter les saletés et poussières persistantes.Ne jamais utiliser de produits de nettoyagetel que de l’alcool ou un diluant.Evitez de placer des objets en vinyl surl’appareil (Le vinyl pourrait coller et décolorerla surface).
L ’ i n s t r u m e n t c o n t i e n t d e s c i r c u i t sélectroniques et cela peut causer desinterférences si il est proche d’une radio oud’une télévision. Si cela arrive, éloignerl’instrument de l’équipement affecté par lesinterférences.
LIEU D’EMPLACEMENT
SOURCE D’ÉNERGIE
METTRE LE BOUTON POWER SUR OFF
AVANT DE BRANCHER L’APPAREIL
•
••
•
•
•
•
•
•
Ne pas exposer le matériel à ces différentesconditions pour éviter toute déformation,décoloration ou de plus sérieux dommages.Exposition au soleil.Températures hautes (près d’une source dechaleur ou dans une voiture la journée).Humidité excessive.
Mettre le bouton power sur OFF lorsquel’instrument n’est pas utilisé.L’adaptateur AC doit être débranché de laprise de courant AC si l’instrument n’est pasutilisé pendant une période prolongée.Débrancher l’adaptateur AC pendant lesorages.Eviter de brancher l’adaptateur AC sur lamême prise. de courant que des appareils dehaute consommation d’énergie comme leschauffages électriques ou les fours. Eviteraussi d’utiliser des prises multiples car celaconduit à réduire la qualité du son, à deserreurs d’opérat ion et à de possib lesdommages du matériel.
Pour éviter tout dommage de l’instrument etdes autres elements auquel il est connecté,mettre le bouton power de tous les élémentsliés sur OFF avant de brancher ou dedébrancher les câb les.débrancher lescâbles.
••
Polvo excesivo.Vibración fuerte.
Nous vous remercions de l'achat du Batterie Electronique Portable SOUNDX. Afin d'obtenir lesmeilleurs résultats avec votre clavier, veuillez suivre les étapes expliquées dans ce manuel quand vouscommencerez à le tester. Nous vous garantissons que vous l'apprécierez et vous découvrirez toutesles possibilités de votre nouveau clavier.
Afin d'obtenir les meilleurs résultats avec votre Clavier Electronique, veuillez suivre les instructionssuivantes:
Félicitation!
Prendre Soin De Votre Ensemble Portatif De Tambour De Digital
F02
CET APPAREIL EST CONFORME A LA SECTION 15 DU REGLEMENT DE LA FCCAMERICAINE (FEDERAL COMMUNICATIONS COMMISSION).SON UTILISATION OBEIT AUX DEUX CONDITIONS SUIVANTES :[1] CET APPAREIL NE DOIT PAS PROVOQUER D'INTERFERENCES NUISIBLES[2] IL DOIT ACCEPTER TOUTE INTERFERENCE REÇUE, Y COMPRIS LESINTERFERENCES RISQUANT DE PROVOQUER UN FONCTIONNEMENT NON SOUHAITE.
Fra
nçais
Contrôles
Installation
Fonction
Fonctionnement
Pour Faire Les Connections
Details Techniques
Liste De Voix
Liste De Kit De Tambour
Liste De Chanson
Graphique Du Mode D'éxécution
..................................................................................................... 4
................................................................................................... 6
....................................................................................................... 7
......................................................................................... 10
........................................................................ 13
..................................................................................... 14...................................................................................... 15 - 16
............................................................................ 17................................................................................ 17 - 18
................................................................. 19
- Vue De Face ................................................................................................ 4- Panneau Arrière ........................................................................................... 5
- Avec Adaptateur AC...................................................................................... 6- Avec Piles.................................................................................................... 6- Utilisation D'écouteurs................................................................................... 6
- Sélectionnez un Kit de Batterie ....................................................................... 7- Régler le Son du Tambour.............................................................................. 7- Régler le Volume du Tambour......................................................................... 7- Régler le Plateau du Tambour......................................................................... 8
- Lecture de Chanson ................................................................................... 10- Régler le Volume Principal ........................................................................... 10- Régler le Volume D'Accompagnement ........................................................... 10- Batterie Éteinte ......................................................................................... 10- Régler la Fonction Tempo ............................................................................ 11- Métronome ............................................................................................... 11- Percussion Manuelle ................................................................................... 11- Fonction de Démo ...................................................................................... 11
- Pédale ...................................................................................................... 13- Sortie Phono ............................................................................................. 13- USB Jack ................................................................................................. 13
- Régler le Gain du Tambour............................................................................. 8- Sauvegarder le Kit ........................................................................................ 9
- ...................................................................... 12- Fonction Record ......................................................................................... 12- Fonction Lecture ........................................................................................ 12
Ajuster la Fonction de Reverb
F03
CONTENU
Fra
nçais
[ + & - ]
[ ]
[ Lecture / Arrêt ]
[ ] et
[ Click ] et
[ Reverb ]
[ ]
3-Digit LED
Volume Principal
Allume - Eteint
Enregistre
Cette molette permet d'augmenter ou réduirele volume maître.
Cet interrupteur active/désactive l'appareil.
Ce bouton permet de démarrer ou arrêter lalecture d'un enregistrement.
Ce bouton permet de démarrer ou arrêter unenregistrement.
Ce bouton permet de changer le niveaud'amplification.
Ce bouton permet d'entrer dans le menu kit.
Ce bouton permet d'entrer dans le menuvocal ou volume.
Ce LED est l'affichage principal indiquant lesparamètres du menu courant.
.
[ Kit ]
bouton
commutateur
bouton
bouton Indicateur de LED
bouton Indicateur de LED
bouton
bouton
La Garniture Assignent bouton
Ce bouton est utilisé pour s'allumer ou outredu métronome
[ Chanson ]
[ ] et
[ Drum OFF ] et
[ Select + & - ]
[ Save ]
[ Acc Volume + & - ] buttons
[ Tempo + & - ]
[ Dial ]
Ce bouton permet d'entrer dans le menumorceaux.
.
.
.
.
.
Ces boutons sont utilisés pour changer letempo en cours.
bouton
Percussion de main bouton Indicateurde LED
bouton Indicateur de LED
boutons
bouton
bouton
bouton
Ce bouton est utilisé pour allumer la fonctionde percussion de main
Ce bouton est utilisé pour permettre ouneutraliser la fonction de tambour enécoutant toutes les chansons
Ces boutons sont utilisés pour changer lesvaleurs (nombre de kit, nombre de voix,nombre de chanson, etc.) en éditant
Ce bouton est utilisé pour sauver tout le kitcourant plaçant à un kit d'utilisateur
Ces boutons peuvent être utilisés pourchanger le volume d'accompagnement
Ce bouton est utilisé pour changer lesvaleurs (nombre de kit, nombre de voix,nombre de chanson, etc.) en éditant.
F04
5
1
2
3
4
6
7
9
14
13
12
11
Vue De Face
CONTRÔLES
1 2 3 4 5 6 7 8 9 10 11 13121 14
15 16 17 1918 20 21 22
BATTERIE (x7)
8
10
17
16
15
23
Fra
nçais
D'écouteurs Jack
Fiches d'entrée Pédale [ KICK / HI-HAT ]
USB Jack
DC Jack
Cette fiche permet de connecter les écouteurs.(La connexion d'écouteurs ne coupe pas les fiches de sortie)
Fiches d'entrée pédale kick et Hi-Hat.
Connexion à un adaptateur DC 12V.( )
.
Ce port est employé pour relier tout le dispositif externe.
Comme indiqué sur la PAGE F06
[ Pan ] bouton
[ Volume ] bouton
.
.
Hauts-parleurs
Ce bouton est utilisé pour changer lacasserole de toute la garniture
Ce bouton est utilisé pour changer levolume de la garniture
[ ]
[ ]
[ Gain ] bouton
Ce bouton permet de démarrer ou arrêterla lecture des morceaux.
Ce bouton permet de démarrer ou arrêterune musique de démo.
Démonstration
.
DE DÉBUT / DE FIN bouton
bouton
Ce bouton est utilisé pour changer le gainde la garniture
F05
CONTRÔLES
Vue De Face
Panneau Arrière
21
22
20
19
18
23
24 25 26 27
24
25
26
27
Connexion Des Pédales (1&2)
:
Les pédales fournies peuvent être connectées à l'appareil pour jouer simultanément les sons dehi-hat ou de basse de la batterie. Elles peuvent également être réglées pour jouer d'autres sons.
Ne pas appuyer sur les pédales au moment de les connecter à l'appareil ni au moment d'allumer.(En cas de connexion de cette manière avec l'appareil activé, la fonction des pédales peut êtreinversée.)
Remarque
PHONES KICK HI HAT USB 12V
Fra
nçais
Avec Piles
Remarque:
Ouvrez le couvercle du compartiment despiles situé au-dessous de l'appareil.
Placez six piles «C» ou piles équivalentes.Respectez la polarité en suivant l'illustration.
On conseille l'utilisation de pilesalcalines.
Refermez le compartiment des piles.
1.
2.
3.
INSTALLATION
Alimentation
Votre clavier électronique peut fonctionner avec des piles ou avec l'adaptateur fourni. Suivez lesinstructions ci-dessous selon l'alimentation que vous utiliserez.
Avec Adaptateur ACBranchez l'adaptateur à l'entrée DC IN située àl'arrière de l'appareil et l'adaptateur AC à la priseAC correspondante.
N'utilisez pas d'autres adaptateurs que ceux quisont recommandés.Les spécifications techniques de l'adaptateursont: sortie DC 9V 500mA, avec centre positif.
Utilisation D'écouteurs
Un jeu optionnel d'écouteurs stéréo peut être branché àl'entrée PHONES / INPUT situé sur le panneau arrière.Quand on branche les écouteurs à la prise jack, les haut-parleurs internes de l'appareil sont automatiquementcoupés (Parfait pour jouer seul ou tard dans la nuit). Si vouspréférez utiliser un dispositif sonore externe, l'entréePHONES / INPUT peut être utilisée pour brancherl'appareil sur un appareil stéréo ou une console de mixage.
éteignez l'appareil avant de faire touteconnexion.Remarque:
F06
REMARQUE:
ATTENTION:
•
•
•
•
L'alimentation sera automatiquement faite par l'adaptateur AC s'il est branché pendant que vous installez lespiles dans cet appareil.
Il est recommandé de changer les piles usagées le plus tôt possible. Quand le voltage baisse, l'affichagecommence à faiblir et / ou le son est distordu; si cela arrive, changez le jeu complet des six piles en utilisantle même type.NE JAMAIS mélanger des piles vieilles avec des neuves, différents types de piles (alcaline, magnésium, etc.)différentes marques ou même différents types de piles de la même marque. Cela pourrait occasionner unesurchauffe, un incendie ou une fuite des piles.De la même façon, pour éviter que les problèmes dus à la fuite des piles, retirez-les de l'appareil quand vousne vous en servez pas pendant une période prolongée.
• Si les piles sont installées dans l'appareil et que vous ne vous en servez pas pendant un certain temps, ellesperdront leur puissance.
Fra
nçais
Le menu kit est le menu par défaut après avoir allumél’appareil sur la valeur par défaut 001.
Appuyez sur le bouton [kit] pour accéder au menu kit.La LED à 3 chiffres affichera le numéro du kit actuelavec l’indicateur de menu correspondant illuminé.Comme sur l’illustration. Les boutons de sélection [+] /[-] ou [dial] peuvent être utilisés pour sélectionner un kit(1-30, boucle) comme kit en cours.
Appuyez sur le bouton [ volume ] pour accéder au menud’assignation de tambour. Si le menu d’assignation detambour est sélectionné, l’indicateur de menucorrespondant sera allumé.
Dans ce menu, la LED à 3 chiffres affichera le volumedu tambour actuel, qui peut être sélectionné enappuyant sur le bouton de tambour sur le panneausupérieur ou en frappant sur le tambour. Les boutonsde sélection [+] / [-] ou [dial] peuvent être utilisés poursélectionner le volume (0-9, boucle) du tambour actuel.
Appuyez sur le bouton d’assignation du tambour pouraccéder au menu d’assignation de tambour. La valeurpar défaut sera la valeur du son de tambour frappéselon les différents kits sélectionnés. Par exemple, sivous avez sélectionné le kit 001, appuyez alors surl’assignation de tambour, la valeur de la LED sera 96car il s’agit de la valeur de son du tambour frappé.
Si le menu d’assignation de tambour est sélectionné, leson correspondant sera l’indication sur la LED.
Dans ce menu, la LED à 3 chiffres affichera le numérode son du tambour actuel, qui peut être sélectionné enappuyant sur le bouton de tambour sur le panneausupérieur ou en frappant sur le tambour. Les boutonsde sélection [+] / [-] ou [dial] peuvent être utilisés poursélectionner un son (1-215, boucle) pour le tambour encours.
F07
Sélectionnez un Kit de Batterie
Régler leSonduTambour
Régler le VolumeduTambour
FONCTION
Fra
nçais
Régler le Plateau du Tambour
Appuyez sur le bouton [ pan ] pour accéder au menud’assignation de tambour. Si le menu d’assignation detambour est sélectionné, l’indicateur de menucorrespondant sera allumé.
Dans ce menu, la LED à 3 chiffres affichera le plateaudu tambour actuel, qui peut être sélectionné enappuyant sur le bouton de tambour sur le panneausupérieur ou en frappant sur le tambour. Les boutonsde sélection [+] / [-] ou [dial] peuvent être utilisés poursélectionner le plateau (0-9, boucle) du tambour actuel.
F08
Régler le Gain du Tambour
Appuyez sur le bouton [ gain ] pour accéder au menud’assignation de tambour. Si le menu d’assignation detambour est sélectionné, l’indicateur de menucorrespondant sera allumé.
Dans ce menu, la LED à 3 chiffres affichera le gain dutambour actuel, qui peut être sélectionné en appuyantsur le bouton de tambour sur le panneau supérieur ouen frappant sur le tambour. Les boutons de sélection[+] / [-] ou [dial] peuvent être utilisés pour sélectionnerle plateau (0-9, boucle) du tambour actuel.
Fra
nçais
Sauvegarder le Kit
Appuyez sur le bouton [save] pour accéder au menu desauvegarde du kit. Les boutons de sélection [+] / [-] ou[dial] peuvent être utilisés pour sélectionner un kitutilisateur (21-30, boucle) dans le réglage du kit. Lorsde la sélection de kit, le numéro de kit utilisateurcontinuera à clignoter.
Appuyez à nouveau sur le bouton [save], le réglage dukit actuel sera sauvegardé dans le kit sélectionné.L’appareil suspendra le menu kit et sélectionnera le kitutilisateur comme kit actuel si toutes les données ontété sauvegardées avec succès.
Si la sauvegarde a échoué en raison d’une erreur, ‘Err’apparaîtra sur la LED.
Le réglage de kit qui n’aura pas été sauvegardé seraperdu après changement de kit.
:Remarque
F09
Fra
nçais
Dans le menu de volume principal, le chiffre situé àgauche de la LED affichera la lettre ‘L’. Les deuxchiffres de droite afficheront le volume principal encours. Les boutons de sélection [+] / [-] ou [dial]peuvent être utilisés pour régler le volume (0-9, pas debouc le ) Cet te va leur sera automat iquementsauvegardée après le réglage.
Dans le menu de volume d’accompagnement, le chiffresitué à gauche de la LED affichera la lettre ‘A’. Les deuxc h i f f r e s d e d r o i t e a f f i c h e r o n t l e v o l u m ed’accompagnement en cours. Les boutons de sélection[+] / [-] ou [dial] peuvent être utilisés pour régler levolume (0-9, pas de boucle) Cette valeur seraautomatiquement sauvegardée après le réglage.
Appuyez sur le bouton [song] pour accéder au menuchanson. La valeur par défaut est 001. La LED à 3chiffres affichera le numéro du chanson actuelle avecl’indicateur de menu correspondant illuminé. Lesboutons de sélection [+] / [-] ou [dial] peuvent êtreutilisés pour sélectionner la chanson actuelle (1-100,boucle). Si les premiers de style 80 sont lus enboucle.,appuyez sur le bouton [start/stop] pourdémarrer ou arrêter la lecture de la chanson. Si vouschangez de chanson pendant la lecture, la nouvellechanson ne démarrera pas avant la fin de la mesure encours.
Chaque chanson a son propre tempo par défaut et kitde batterie. Le lecteur de chanson démarrera le kit encours et le tempo en cours au début de la lecture de lachanson.
F10
FONCTIONNEMENT
Lecture de Chanson
Régler le Volume Principal
Régler le Volume D’Accompagnement
En appuyant sur le bouton [drum off] vous activerez oudésactiverez la fonction de la batterie lors de la lecturede chanson. Si la fonction off de la batterie est activée,le son de la batterie sera éteint et l’indicateur off de labatterie s’allumera. Cette fonction est assez utile pours’entraîner.
Batterie Éteinte
Fra
nçais
Appuyez sur les boutons tempo [+] et [-] pour accéderau menu tempo. Les boutons [+] et [-] peuvent êtreutilisés pour changer le tempo en cours (30-280, pasde boucle), ce qui affecte la vitesse de sélection et delecture de la chanson. En appuyant à la fois sur [+] et [-], vous réinitialiserez le tempo en cours à sa valeur pardéfaut (tempo de la chanson en cours).
Appuyez sur le bouton [hand percussion] pour accéderau mode de percussion manuelle et l’indicateur modemanuel s’allumera. Le numéro de chanson est 5 et lenuméro de kit est 21.
Le métronome sera lancé une fois qu’une chanson seralue mais uniquement avec l’indicateur clignotant.Appuyez sur le bouton [click] pour compter les sonshumains. Appuyez sur le bouton [click] deux fois poursélectionner le son. Appuyez à nouveau sur le boutonde sélection pour éteindre la fonction de sélection.
Appuyez sur le bouton [demo] pour commencer ouarrêter la lecture de la chanson démo. La LED à 3chiffres affichera ‘dE’, vous pouvez aussi appuyer sur lebouton [start/stop] pour arrêter la lecture de lachanson demo. Lorsque la chanson démo est enlecture, vous pouvez régler la valeur tempo.
F11
Régler la Fonction Tempo
Métronome
Percussion Manuelle
Fonction de Démo
Fra
nçais
Appuyer sur [le bouton de reverb] pour écrire la fonctionde reverb. Dans ce menu, le chiffre sur loin laissé de laLED montrera le `R de lettre'. Les deux chiffres du côtédroit montreront le niveau courant de reverb. Choisi[+]/[-] des boutons ou [cadran] peuvent être utilisés pourajuster le niveau de reverb (0-3, pas boucle). Cette valeursera sauvegardée automatiquement après ajusté.
Préparer L’enregistrement
:
Sélectionnez la chanson souhaitée, le kit batterie, leréglage batterie off et les réglages de réverbe.
Appuyez sur le bouton [rec], la lumière commencera àclignoter. Appuyez sur le bouton [start/stop] oufrappez le tambour, la lumière s’arrêtera de clignoteret l’enregistrement débutera.
Pour arrêter l’enregistrement, appuyez sur le bouton[start / stop] ou sur le bouton [rec]. L’indicateurenregistrement s’éteindra. Si la mémoire est pleine,‘ F L ’ appa ra î t r a à l ’ é c ran e t l a p rocédured’enregistrement s’arrêtera automatiquement.
Lorsque vous démarrez l ’enreg istrement, lemétronome vocal commence aussi le comptage.Cependant, le son de la voix ne sera pas enregistré.Pour arrêter le métronome, appuyez sur le bouton[click].
Démarrer L’enregistrement
Arrêter L’enregistrement
Remarque
Appuyez sur le bouton [play/stop] pour démarrer ouarrêter la lecture de la chanson enregistrée.
Lorsque vous enregistrez une nouvelle chanson, celaremplacera l’enregistrement précédent. Les donnéesde la chanson seront perdues lorsque vous arrêterezl’alimentation.
:Remarque
F12
Fonction Lecture
Ajuster la Fonction de Reverb
Fonction Record
Fra
nçais
La sortie phono accepte des écouteurs stéréo comme appareil de sortie.
Cet appareil accepte 1 pédale hi-hat et 1 pédale kick comme appareils d'entrée.
F13
POUR FAIRE LES CONNECTIONS
Pédale
Sortie Phono
Cet appareil émettra une sortie de tous les codes MIDIgénérés pas la frappe du tambour ou de l’appui de lapédale par le connecteur de sortie MIDI. En cliquant,les codes MIDI des chansons sont exclus. Il reçoit aussiles données MIDI de l’appareil externe.
USBJack
PHONES KICK HI HAT USB 12V
PHONES KICK HI HAT USB 12V
Fra
nçais
Garniture De
Tambour
Kits De
Tambour
Main-
Percussion
:
Song:
:
Power Supply:
Dimension:
(W x D x H)
:
Voix:
:
Affichage:
Connections:
Métronome:
Poids:
Accessoires
7 garnitures de tambour avec la sensibilité de contact etdeux pédales (tambour bas et salut-chapeau)
25 kits préréglés de tambourKits faits sur commande de 5 tambour
100 chansons préréglées(inclure 80 modèles et 20 chansons)
Affichage à LED De 3 chiffres
Rendement d'écouteurs
2 voix différentes
Adaptateur AC
Adaptateur ACPédale de coup-de-piedPédale de Bonjour-ChapeauBâton de tambourÉcouteur
215 voix de percussion et 128 voix de GM, bytes de 8Mexpriment des données
Utiliser votre main pour frapper des garnitures
+
(DC 12V.)
pouces50.0 x 37.0 x 15.7 centimètres
(DC 12V)1 x1 x2 x1 x
USB Jack (MIDI IN / OUT)
19.7 x 14.6 x 6.2 /
7.26 lbs / 3.3 kgs
F14
DETAILS TECHNIQUES
Un volume excessif dans les écouteurs ou casques peut produire des pertes d'audition. Laprise de COURANT est utilisée comme sert à débrancher l'appareil, le système dedébranchement doit continuer à fonctionner.
Fra
nçais
F15
LISTE DE VOIX
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Kick KIT
Rock Kick 001
Rock Kick 002
Rock Kick 003
Standard Kick 001
Standard Kick 002
Standard Kick 003
Standard Kick 004
Pop Kick 001
Pop Kick 002
Pop Kick 003
Acoustic Kick 001
Acoustic Kick 002
Acoustic Kick 003
Acoustic Kick 004
Acoustic Kick 005
Acoustic Kick 006
Acoustic Kick 007
Acoustic Kick 008
Acoustic Kick 009
Acoustic Kick 010
Acoustic Kick 011
Snare KIT
Standard Snare 001
Standard Snare 002
Standard Snare 003
Standard Snare 004
Standard Snare 005
Standard Snare 006
Brush Snare 001
Brush Snare 002
Standard Stick 001
Standard Stick 002
Rock Snare 001
Rock Snare 002
Rock Snare 003
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
Acoustic Tom 004
Acoustic Tom 005
Acoustic Tom 006
Hihat KIT
Standard Hihat Close
Standard Hihat Pad
Standard Hihat Open
Analog Hihat Close
Analog Hihat Pad
Analog Hihat Open
Shakable
Rock Hihat Close
Rock Hihat Pad
Rock Hihat Open
Acoustic Hihat Close
Acoustic Hihat Pad
Acoustic Hihat Open
C ash KIT
Standard Crash001
Standard Crash002
Standard Crash003
Analog Ride001
China Crash
Splash001
Standard Ride 001
Rock Crash
Standard Ride 002
Electronic Crash
Splash002
Ride Bell
Panel KIT
Vibraslap
Hand
Tambourine
Stcowb
Mutecowb
r
Pop Snare 001
Pop Snare 002
Pop Snare 003
Acoustic Snare 001
Acoustic Snare 002
Acoustic Snare 003
Acoustic Snare 004
Acoustic Snare 005
Tom KIT
Standard Tom 001
Standard Tom 002
Standard Tom 003
Standard Tom 004
Standard Tom 005
Standard Tom 006
Room Tom 001
Room Tom 002
Room Tom 003
Room Tom 004
Room Tom 005
Room Tom 006
Electronic Tom 001
Electronic Tom 002
Electronic Tom 003
Electronic Tom 004
Electronic Tom 005
Electronic Tom 006
Analog Tom 001
Analog Tom 002
Analog Tom 003
Analog Tom 004
Analog Tom 005
Analog Tom 006
Acoustic Tom 001
Acoustic Tom 002
Acoustic Tom 003
NO.. NAME NO.. NAMENO.. NAME
Fra
nçais
F16
LISTE DE VOIX
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
Mute Hi Conga
Open Hi Conga
Low Conga
Hi Bongo
Low Bongo
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Shaker
Claves
Mute Triangle
Open Triangle
Short Guiro
Long Guiro
Mute Cuica
Open Cuica
Mute Surdo
Open Surdo
Maracas
HighQ
Slap
Scratch Push
Scral
On
Two
Three
Four
Cartoon001
Cartoon002
Cartoon003
Cartoon004
Cartoon005
Cartoon006
Laugh
e
Metronome1
Metronome2
NO.. NAME NO.. NAMENO.. NAME
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
SFX033
SFX034
SFX035
SFX036
SFX037
SFX038
SFX039
SFX040
SFX041
SFX042
SFX043
SFX044
SFX045
SFX046
SFX047
SFX048
SFX049
SFX050
SFX051
SFX052
SFX053
SFX054
SFX055
SFX056
SFX057
SFX058
SFX059
SFX060
SFX061
SFX062
SFX063
SFX064
SFX065
SFX066
SFX067
SFX068
SFX069
SFX070
Tambourine001
Tambourine002
Tambourine003
Tambourine004
Tambourine005
Sfx KIT
SFX001
SFX002
SFX003
SFX004
SFX005
SFX006
SFX007
SFX008
SFX009
SFX010
SFX011
SFX012
SFX013
SFX014
SFX015
SFX016
SFX017
SFX018
SFX019
SFX020
SFX021
SFX022
SFX023
SFX024
SFX025
SFX026
SFX027
SFX028
SFX029
SFX030
SFX031
SFX032
Fra
nçais
F17
LISTE DE KIT DE TAMBOUR
LISTE DE CHANSON
NO. NAME NO. NAME
01 Pop1 16 Jazz2
02 Pop2 17 Funk
03 Standard 1 18 Clave
04 Room 19 Drum Bass
05 Rock 1 20 Hip Hop
06 Electronic 21 Conga1
07 Analog 22 Conga2
08 Jazz 1 23 Timbales
09 Brush 24 Latin
10 Standard 2 25 Funk
11 Rock2 26 User 1 (pop1)
12 Boss 27 User 2 (pop2)
13 Rock3 28 User 3 (Standard1)
14 Standard 3 29 User 4 (Room)
15 Rock4 30 User 5 (Rock1)
01
03
02
05
21
21
21
01
03
04
05
03
01
02
05
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Intro
8 Beat2
8 Beat3
8 Beat4
8 Beat5
8 Beat Ballad1
8 Beat Ballad2
8 Beat Ballad3
Soft Rock
Rock1
Rock2
Rock3
Rock4
Rock5
Hard Rock1
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
NO.. NAMEKIT BEAT
8 Beat
07
03
01
07
04
02
01
21
21
05
03
01
03
01
05
17
18
19
20
21
22
23
24
25
26
27
28
29
30
16
16 Beat 1
16 Beat 2
16 Beat 3
16 Beat 4
16 Beat 5
16 Beat 6
16 Beat 7
16 Beat Ballad 1
16 Beat Ballad 2
16 Beat Ballad 3
16 Beat Ballad 4
16 Beat Ballad 5
16 Beat Funk 1
16 Beat Funk 2
Hard Rock2
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
NO.. NAMEKIT BEAT
Intro
Fra
nçais
F18
LISTE DE CHANSON
07
07
01
06
04
07
09
09
08
03
01
03
12
02
03
02
01
01
03
01
03
12
09
04
03
01
03
02
03
01
05
04
03
03
04
01
04
03
05
03
05
05
01
03
07
03
03
23
12
12
03
01
03
03
12
12
12
12
01
01
03
02
03
31
32
33
34
35
36
67
68
69
37
38
39
70
71
72
73
74
75
76
77
78
79
80
40
41
42
43
44
45
46
47
48
49
50
51
52
53
81
82
83
84
85
86
87
88
89
54
55
56
57
58
59
60
61
62
63
64
65
66
90
91
92
93
Dance 1
Dance 2
Dance 3
Dance 4
Dance 5
Dance 6
Swing 1
Swing 2
Swing 3
Rap 1
Rap 2
Rap 3
Waltz
3/4 Ballad
Swing Blues
Blues
March 1
March 2
R&B
Hip-Hop
Funk
Country
Big Band
Bounce 1
Bounce 2
Bounce 3
Shuffle 1
Shuffle 2
Shuffle 3
Shuffle 4
Shuffle 5
Shuffle 6
Shuffle 7
Slow Rock 1
Slow Rock 2
Slow Rock 3
Slow Rock 4
8 Beat 1
8 Beat 2
Ballad
Hard Rock 1
Hard Rock 2
Hard Rock 3
Pop Dance 1
Pop Dance 2
R&B
Reggae 1
Reggae 2
Bossa Nova 1
Bossa Nova 2
Samba
Salsa
Latin Rock
Cha-Cha
Mambo
Rhumba 1
Rhumba 2
Rhumba 2
Tango
16 beat
Fusion
Funk 1
Funk 2
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
NO.. NO..NAME NAMEKIT KITBEAT BEAT
Dance Swing
Rap
Others
Bounce
Shuffle
Slow Rock
Latin
16 beat
8beat
Funk
Shuffle
04
03
03
01
94
95
96
97
Shuffle 1
Shuffle 2
16 Beat Shuffle
16 Beat Triplet
4/4
4/4
4/4
4/4
Others
03
12
08
98
99
100
Reggae
Bossa Nova
Big Band
4/4
4/4
4/4
Fra
nçais
Remarques
O 9nH,V=1-127X (9nH,V=0)
Transmission Reconnu
10chX
27-88
Fonction
CanalormalN
Mode
Exclusivité de Système
Pitch Bend
Vélocité
ProgrameChangement
Contrôle
Système
Commun
Numérode Note
CléCanal
HorlogeCommandeDe DébutDe Fin
Aux
Messages
1-16chX
0 - 1270 - 127
O 9nH,V=1-127X (9nH,V=0;
8nH,V=0 -127)
X000
0
00 - 127
0
XX
**********
XXX
**********
Par DéfautModifié
Par DéfautMessagesAltéré
Vrai son
Note onNote off
AprèsLien
01571011206465666780819193120121123
True
Position d’unechansonSélection d’unechansonTune
Horloge en
Temps Réel
Local ON/OFFTout note OFFActifReset
XX
XX
X
XXXXXXXXXXXXXXXXXX
XX
**********
XXX
XXX
XX
XXXX
XX
000000000000000000
F19
GRAPHIQUE DU MODE D’ÉXÉCUTION
Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO 0 : OUIMode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO X : NON
Fra
nçais
Sélection De BancModulation
Pédal Enfoncé
Pédale De SostenutoPédale DouceProgrammeProgramme ChorusNiveau ReverbNiveau ChorusTout Son OffMis À 0 Du ContrôleToute Note Off
Temps de Portamento
Attribution de rythme
VolumePanExpression
Reverb
Portamento "Marche/Arrêt”
The Singing Machine Company, Inc.
6601 Lyons Road, Bldg. A7, Coconut Creek, FL33073-9902, USA.TEL: (954) 596-1000 FAX: (954) 596-2000
1450-0709-ESF02
VISIT OUR WEBSITE www.singingmachine.comVISITE NUESTRO SITIO INTERNET
VISITE NOTRE SITE INTERNETwww.singingmachine.com
www.singingmachine.com
PRINTED IN CHINAIMPRESO EN CHINAIMPRIMÉ EN CHINE