Design and Specif ications are subject to change without notice.

7" DIGITAL WATERPROOF LED MONITOR

Model No.: SV-LED70WP4

OWNER'S MANUAL

PLEASE READ CAREFULLY BEFORE USING AND KEEP IN A SAFE PLACE.

2

Model No.

Serial No.

SV-LED70WP4

OWNER'S RECORDr

WARNING

You are cautioned that any changes or modifications which are not expressed or approved in the manual could void your warranty and cause the equipment to malfunction.

- Use only DC 10V ~ DC 32V. - If liquid or dust leaks into the case, turn off power to the unit and

consult an experienced technician before using.

- Do not install the unit in an extremely hot or humid place (radiator, air duct, etc.) or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

- If your vehicle has been parked in direct sun light resulting in a considerable rise in temperature inside the vehicle, allow the unit to cool off before operating.

- Clean the unit with a slightly damp soft cloth. Use a mild household detergent. Never use strong solvents such as thinner or benzene as they might damage the finish of the unit.

Safety

Installation

General cleaning information

1

2

3

3

SUGGESTIONSr

7" DIGITAL WATERPROOF LED MONITOR

4

FEATURESr

4

PACKAGE CONTENTSr Please check that you have the correct contents before using this product.

If any items are missing, please contact your dealer.

" - Wide 7 Digital LED Panel

- NTSC/PAL Compat ib i l i ty

- Au to DAY /N I GHT De te c t i on

- Mu l t i p l e d i sp l ay modes ( S I NGL E , SPL I T , TR I PL E , P I P , QUAD )

- Ad ju s t a b l e Speed sw i t c h

- Vandal Resistant

- Suppo r t s Va r i o us D i v i de Mode

- P a r k i n g D i s t a nce Ma rke r Se t t i n g Ava i l a b l e

- Capac i t i v e Touch Key s

- Supports Multi-Functional Cameras

(Normal, Shutter, Tilt on CAM1 and CAM2)

- Wa te r Re s i s t a n t ( I P68 )

SV-LED70WP4 MONITOR SUN VISOR

POWER CORD SCREW KITS INSTRUCTION MANUAL

STAND BRACKETOPTIONAL

(SCREW TYPE)

(RAIL TYPE)

OR

Design and Specif ications are subject to change without notice.

7" DIGITAL WATERPROOF LED MONITOR

Model No.: SV-LED70WP4

OWNER'S MANUAL

PLEASE READ CAREFULLY BEFORE USING AND KEEP IN A SAFE PLACE.

OPERATIONSr

POWER

2 SELECT

Touch to turn the monitor on.

Touch to turn the monitor off.

Touch to select CAMERA.

Touch to select the option in SET UP MENU.

Use to enter the Display Menu (short press) and

the Main Menu (long press).

Touch once to enter menu mode.

Touch again to exit from menu mode.

Selectable OSD menu disappears in 7 seconds if no buttons are

pressed.

Touch the MENU button over 2 seconds to go back to the

Main Menu and a submenu.

3 MENU

POWER

SELECT

MENU

UP

DOWN

1

1

2

3

4

5

6

5

Monitor start mode will follow “AUTO POWER SETTING”2 NOTE NOTE

SELSEL

SEL

MENUMENU

OPERATIONSr

UP DOWN4 5

While in Menu mode and navigate though

the available menu options.

Touch to adjust Bright, Contrast, Color, Tintand

Volume and other setting values.

DAY/NIGHT SENSOR 6

The brightness of the monitor is adjusted automatically

with the DAY/NIGHT SENSOR according to circumstances.

Automatic Brightness Control

6

TINT * menu is displayed in NTSC only.

BRIGHT

CONTRAST

COLOR

TINT

DISPLAY MENU

30

30

30

30

BRIGHT

CONTRAST

COLOR

TINT

PAL MODE NTSC MODE

30(0~60)

30(0~60)

30

(0~60)

30(0~60)

OPERATIONSr. DISPLAY MENU

7

MENU UP / DN SELECTSELECT SELECTSELECTDN DN

Option settingShort Press(more than 0.5 sec)

UP / DN

SELSELMENU

OPERATIONSr

8

. SETUP MENU

Press the MENU button for over 2 seconds to enter the MAIN MENU.

Selectable OSD menu disappears in 7 seconds i f no buttons are pressed.

CAMERA SETTING 1

SUBDIVISION MENU can control BRIGHT, CONTRAST and COLOR

for individual channels (CAM1-CAM4, AUX)

N AM E : [ C AM 1 ]

S U B D I V I S I O N M E N UBRIGHT

CONTRAST

COLOR

SUBDIVISION MENUU

30

30

30

option setting option setting

A

selecting shifting shifting shifting

UP / DN UP / DN UP / DN

exit

2 NOTE NOTE

CAM1

CAM2

CAM3

CAM4

AUX

1. CAMERA SETTING

SUBDIVISION MENU

NOR/MIR : [MIRROR;NORMAL]

N AM E : [ C AM 1 ]

SORT:[NORMAL;SHUTTER;

TILT.AT;TILT.MT]

UP/DOWN : [ ]U P ; D OWN

long press(more than 2 sec) up / down shifting

A

option sett ing

UP / DN SELECTSELECT

SEL

MENU

MENU

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

MENU

MENU

9

OPERATIONSrNOR/MIR : [MIRROR;NORMAL]

UP/DOWN : [UP;DOWN]

NOTE NOTE 2

NOTE NOTE 2

Normal/Mirror image can be switched (CAM1-CAM4, AUX)

Up/Down image can be switched (CAM1-CAM4, AUX)

CAM1,CAM2

NAME : [CAM1]

exitoption setting

A

selecting shifting name setting shifting

UP / DN

UP / DN UP / DN

2 NOTE NOTE Can give each camera name.

exitoption setting

A

selecting shifting

CAM1,CAM2

SORT:[NORMAL;SHUTTER;TILT.AT; ] TILT.MT

UP / DN

UP / DN

2 NOTE NOTE Select camera type between NORMAL, SHUTTER, TILT AUTOMATIC or

Press MENU key two times to display the OSD below.

TILT CONTROL:

Press key for TILT UP.

Press key for TILT DOWN.

TILT MANUAL.

How to control TILT MANUAL:

Select “TILT.MT”Exit MENU.

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

MENU

MENU

MENU

MENU

10

OPERATIONSr

2 TRIGGER SETTING

TRIGGER1TRIGGER2TRIGGER3TRIGGER4TRIGGER5

2. TRIGGER SETTING

SOURCE:[CAM1~4;AUX; SPLIT1~3;SKIP]

DELAY:[0~20sec]

MARKER:[ON;OFF]

MARKER SETTING

SOURCE:[CAM1~4;AUX;SPLIT1~3;SKIP]

Trigger1~5

Trigger1~5

Trigger1~5

exitoption setting

A

selecting

Up to 5 triggers can be selected (CAM1-CAM4, AUX, SPLIT1-SPLIT3, and SKIP).

When the trigger is activated, the selected source’s image is displayed.

DELAY:[0~20SEC]

Each trigger's delay time is adjustable from 0 sec to 20 sec.

2 NOTE NOTE If one camera is activated

by an intermittent signal

(for example, from a turn signal)

the delay must be activated to

prevent the picture from flickering.

MARKER:[ON;OFF]

MARKER SETTING

exit

eexxiitt

option setting

option setting

option setting

A

A

selecting

selecting

shifting

shifting

selecting

A

selecting shifting shifting selecting

SOURCE SOURCE

UP / DN

UP / DN

UP / DN

SOURCE SOURCE UP / DN

SOURCE UP / DN

exit

WIDTHLEFT-RIGHT

LEFT-RIGHT

LEFT-RIGHT

UP-DOWN

UP-DOWN WIDTH

UP-DOWN

SOURCE SOURCE UP / DN UP / DN UP / DN

ON

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

MENU

MENU

MENU

MENU

MENU

MENU

MENU

MENU

OPERATIONSr

11

3 SPLIT SETTING

3. SPLIT SETTING

AUDIO:[CAM1~4;AUX;OFF]

DISPLAY TYPE

SOURCE1~4:[CAM1~4;AUX;OFF]

SPLIT1SPLIT2SPLIT3

SOURCE1:[CAM1~4;AUX;OFF]

SOURCE2:[CAM1~4;AUX;OFF]

SOURCE3:[CAM1~4;AUX;OFF]

SOURCE4:[CAM1~4;AUX;OFF]

AUDIO:[CAM1~4;AUX;OFF]

DISPLAY TYPE

SPLIT1~SPLIT3

exitoption setting

A

selecting selectingshifting

UP / DN

SPLIT IMAGE

DISPLAY TYPE

DISPLAY TYPE

QUAD IMAGE

DISPLAY TYPE

TRIPPLE IMAGE

Default settings are as follows: SPLIT1: SPLIT IMAGE, SPLIT2: TRIPLE IMAGE,

and SPLIT3: QUAD IMAGE.

Selected camera can't be selected in other SOURCES.

Audio function is only avaialable on selected channel.

Display type is automatically changed to SPLIT / TRIPLE/ QUAD image

according to the selected number of cameras.

Display type is automatically changed to the first image type in

SPLIT / TRIPLE / QUAD image if the selected number of cameras is changed.

2 NOTE NOTE

2 NOTE NOTE

exitoption setting

A

selecting shifting

UP / DN

UP / DN SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

MENU

MENU

MENU

MENU

OPERATIONSr

12

UNDER FREQUENCY CH:[CAM1~4;AUX;SPLIT1~3]

OVER FREQUENCY DISPLAY:[ON;OFF]

OVER FREQUENCY CH:[CAM1~4;AUX;SPLIT1~3]

FREQUENCY:[10~1000Hz]

4 SPEED SWITCH

SPEED SWITCH:[ON;OFF]

FREQUENCY:[10~1000Hz]

UNDER FREQUENCY CH:[CAM1~4;

AUX;SPLIT1~3]

OVER FREQUENCY DISPLAY:[ON;OFF]

OVER FREQUENCY CH:[CAM1~4;

AUX;SPLIT1~3]

4. SPEED SWITCH SPEED SWITCH:[ON;OFF]

EXAMPLE OF SPEED SWITCH FUNCTION:

*The purple wire needs to be connected to the vehicle's tachometer signal and the SPEED SWITCH setting must be set to ON.

*Adjusted to 67Hz (the most common tachometer signal) the camera selected in the UNDER FREQUENCY CH

field is displayed while the vehicle is traveling 0 to about 20 mph.

*Adjust the FREQUENCY to your vehicle's specific tachometer signal.

*Over 20 mph, the selected camera display Switches off. When speed returns to below 20 mph, the camera displays again. To display another source when the vehicle is traveling over 20 mph, select ON in OVER FREQUENCY DISPLAY and select a source in OVER FREQUENCY CH.

*Trigger activation overrides speed switch functionality.

Select ON to activate the speed switch.

Select OFF to deactivate the speed switch.

Select activated frequency 10-1,000Hz

Over 20 mph, the selected camera display Switches off. When speed returns to below 20 mph, the camera displays again. To display another source when the vehicle is traveling over 20 mph, select ON in OVER FREQUENCY DISPLAY and select a source in OVER FREQUENCY CH.

Select ON to display an image when the input frequency is higher than

standard.

Adjust the FREQUENCY to your vehicle's specific tachometer signal.

Press SELECT for a short time to change the frequency by 1Hz.

Press and hold SELECT to change the frequency by 10Hz intervals.

exitoption setting

A

shifting

SOURCE UP / DN SELECTSELECT

SEL

MENU

MENU

2 NOTE NOTE1

2 NOTE NOTE

2 NOTE NOTE

2 NOTE NOTE

2 NOTE NOTE

2 NOTE NOTE2

13

SENSITIVITY:[0~60]

NIGHT BRIGHT:[0~60]

SENSOR:[ON;OFF]

SENSITIVITY:[0~60]

NIGHT BRIGHT:[0~60]

5. DAY/NIGHT SETTING SENSOR:[ON;OFF]

5 DAY/NIGHT SETTING

AUTO SCAN SETTING6

6. AUTO SCAN SETTING

AUTO SCAN:[ON;OFF]

AUTO SCAN DELAY SETTING

AUTO SCAN:[ON;OFF]

AUTO SCAN DELAY SETTING

exitoption setting option setting

A

shiftingshifting

UP / DN UP / DN

OPERATIONSr

Select ON to activate Day/Night functionality.

Select OFF to deactivate Day/Night

functionality.

Adjust the sensitivity of the Day/Night function.

Adjust the BRIGHTNESS level.

Each channel is displayed sequentially according to the time entered in

AUTO SCAN DELAY SETTING.

Press the SEC button to maintain the display of a channel.

A channel does not display if AUTO SCAN DELAY TIME is set to "0".

Select ON to activate the Auto Scan

function.

Select OFF to deactivate the Auto Scan

function.

exitoption setting

A

shifting

SOURCE UP / DN SELECTSELECT

SEL

MENU

MENU

exitoption setting

A

shifting

SOURCE UP / DN SELECTSELECT

SEL

SELECTSELECT

SEL

SELECTSELECT

SEL

MENU

MENU

MENU

MENU

2 NOTE NOTE

2 NOTE NOTE

2 NOTE NOTE

2 NOTE NOTE

2 NOTE NOTE

14

7 ADVANCED MENU

AUTO POWER:

[OFF;ON;AUTO]

FACTORY RESET

7. ADVANCED MENU AUTO POWER:[OFF;ON;AUTO]

FACTORY RESET

Reset to default settings.

Auto Setting Monitor keeps the last setting in memory:

Monitor will start up “Power-on” mode or “Stand- by”mode according

to its last mode before the ignition key off.

Off Setting Monitor keeps “Stand- by”setting regardless of the last mode

before the ignition key off.

On setting: Monitor will be turned on automatically when ignition key on

regardless of the last mode of the monitor before the ignition key off.

OPERATIONSr

exitoption setting

option setting

A

A

shifting

shifting

SOURCE

SOURCE

UP / DN

UP / DN

SELECTSELECT

SEL

SELECTSELECT

SEL

MENU

MENU

2 NOTE NOTE

2 NOTE NOTE

INSTALLATIONr1

2

1-1. STAND BRACKET(SCREW FIXING TYPE)

1-2. STAND BRACKET(RAIL TYPE)

DASH BOARD SCREW MONITOR

SUNVISOR MONITOR

15

SYSTEM CONNECTIONSr

16

VIDEO INPUT (YELLOW/BNC/FEMALE)

AUDIO (WHITE/RCA/JACK)INPUT

VIDEO OUTPUT (RED/BNC/FEMALE)

53

5 m

m5

80

mm

CA1 CA2 CA3 CA4

510 m

m

410 m

m

310 m

m

210 m

m

210 m

m

210 m

m

210 m

m

70

mm

40 mm

IP/FEMALE

100 mm

50 mm

2 M

1#16 RED

#16 BLK #22 YEL #22 BLU #22 ORG

#22 GRN #22 BRW#22 WHT

5

3

7

2

6

4

8

No12345678

TRIGGER 1 (GREEN/AWG No.22)

TRIGGER 2 (WHITE/AWG No.22)

TRIGGER 3 (BLUE )/AWG No.22

TRIGGER 4 (YELLOW )/AWG No.22

TRIGGER 5 (BROWN )/AWG No.22

SPEED PULSE (ORANGE/AWG No.22)

GROUND (BLACK )/AWG No.16

DC10~32V (RED )/AWG No.16

REMARKS

“REAR VIEW”

r SPECIFICATIONS

17

Power Input

Power Consumption

Video System

Panel

Resolution

Format

Display Mode

Camera input(4CH)

Operating Temp.

Storage Temp.

Vibration

I.P Factor

OSD Control

Dimension

Weight

Supplied acc’y

DC 10V~32V

Max. 30Watt

NTSC / PAL compatible

7" Digital

16:9 wide

Single/Split/Triple/Pip/Quad

Mini DIN 4P, 1Vp-p 75 Ω

-30 ~ +75 ( -22 ~ 167)

-40 ~ +85 ( -40 ~ 185)

7G

IP 68

Day & Night Sensor

Bright, Contrast, Color, Tint

Mirror/Normal, Day/Night Mode/Scale

*Individual Control per Channel available

194(W) X 125(H) X 32(D) mm

7.6(W) X 4.9(H) X 1.2(D) inch

Approx. 720g

Power Cord (1)

Screw Kit (1)

Stand Bracket (1)

Sun Visor (1)

Instruction Manual (1)

800 (H) X3(RGB) X 480 (V) pixels

Model No.: SV-LED70WP4

THIS SYMBOL MEANS DO NOT DISPOSE OF AS MUNICIPAL WASTE. RE-USE OR RECYCLE WHEREVER POSSIBLE. ELECTRICAL / ELECTRONIC COMPONENTS MAY CONTAIN SUBSTANCES WHICH ARE HARMFUL TO THE ENVIRONMENT. FOR ENVIRONMENTALLY SOUND METHODS OF DISPOSAL, PLEASE CONTACT YOUR LOCAL GOVERNMENT AUTHORITY.

18

printed in korea

19