Upload
german-favela
View
213
Download
0
Embed Size (px)
Citation preview
8/17/2019 6bp-led (2)
1/2
Catalog
Number
Notes
Type
DOWNLIGHTING 6BP_
LED Recessed Downlight
6BP6” LED Modul
IC/No
Retr
FEATURES & SPECIFICATIONSINTENDED USE — Our recessed LED module is the most economical means to create a well lit
environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing
downlight cans or new construction and remodel applications. Unique torsion spring and friction clip
retention allows fitment into nearly 100% of installed cans. The LED module maintains at least 70% light
output for 50,000 hours.
CONSTRUCTION — Aluminum die cast reflector with deep baffle configuration for reduced glare.Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the
pressed-in diffused lens.
OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general
illumination, equivalent to 65W BR30 lamp.
Wide flood beam angle at >45°. Utilizes 3000 K color temperature LEDs. CRI - 86
ELECTRICAL SYSTEM — Center 2 Edge™ (patent pending) technology created for a single point source.
Primary power disconnect provided for simple connection to a dedicated LED connector in the housing.
Dimming down to 15%. For compatible dimmers, refer to Compatible Dimmers Chart.
Standard input wattage is 8.9 watts, 70 lumens per watt; equivalent to 65-watt incandescent.
*Actual wattage may differ by +/-5% when operating at 120V +/-10%.
INSTALLATION Suitable for installation in standard and shallow-height rough-in sections.
E26 socket adapter and splice kit ships standard. This enables easy installation or permanent conversion to
an LED source for Title 24 compliance.
Twin torsion springs ensure easy installation.
Friction clips included to allow fitment into cans without torsion brackets from an inside diameter of 6.0”
to 7.0”.
LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® qualified; California T24
compliant. Wet location listed for indoor use only. WSEC ASTM E283 for Air-Tight (with IC housings).
WARRANTY — Five-year limited warranty. Full warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Specifications subject to change without notice.
PATENTS PENDING.
6BPMW LED
Series/Finish Lamps/Lumens1 Color temperature Voltage Options
6BP 6" Baffle LEDModule
MW Matte white LED 8.9W, 620lumens
(blank) 3000 K (blank) 120V L7XLED T24 New Construction Rough-In LED Base
L7XLED T24 SDT 277V Non-IC 277V stepdown transformer (277V to 120V) RoughLED Base
L7XRLED T24 Remodel Rough-In LED BaseLC6LED T24 New Construction Rough-In LED Base
L7X2 New construction rough-in
L7XR2 Remodel rough-in
L7XP2 New construction shallow rough-in
L7XPR2 Remodel shallow rough-in
LC62 New construction rough-in
LCP2 New construction shallow rough-in
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: 6BPMW
Notes
1 Total system delivered lumens.
2 Must be ordered on separate line.
Accessories: Order as separate catalog number.
FL2LED Makes L7XF housings compatible with the LED module
Torsion mount shown
Friction clip shown (included)E26 adaptor Splice kit
5-7/8(14.9)
3-7/8(9.8)
7-7/8(20.0)
Specifications
Aperture: 5 7/8 (14.91)
Ceiling Opening: as rough-in
Overlap Trim: 7-5/8 (19.4)
Height: 3-7/8 (9.8)
All dimensions are inches
(centimeters) unless
otherwise noted.
http://www.acuitybrandslighting.com/library/LL/documents/OtherDocuments/LED%20Module%20Dimmer%20Compatibility.pdfhttp://www.acuitybrandslighting.com/library/LL/documents/OtherDocuments/LED%20Module%20Dimmer%20Compatibility.pdfhttp://www.acuitybrandslighting.com/library/LL/documents/OtherDocuments/LED%20Module%20Dimmer%20Compatibility.pdf
8/17/2019 6bp-led (2)
2/2
6BP_LED
DOW NLI GHTI NG One Lithonia Way Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/01/12
6” LED Module
6BPMW LED, 3000 K LEDs, input watts: 8.9, delivered lumens: 620, LM/W=70 , test no. LTL21369, tested in accordance with IESNA LM 79-08
PHOTOMETRICS
Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor fora Single Luminaire
0° 20°
40°
60°
80°
200
Ave Lumens
0
5
15
25
35
45
55
65
75
85
90
318
317
305
280
224
134
69
39
16
4
0
30
86
128
138
104
63
38
18
4
Zone Lumens % Lamp
0° - 30°
0° - 40°
0° - 60°
0° - 90°
90° - 180°
0° - 180°
244.4
382.7
549.8
610.4
0.0
610.4
40.0
62.7
90.1
100.0
0.0
*100.0
*Efficiency
%02f p
pc 80% 70% 50%
pw 50% 30% 10% 50% 30% 10% 50% 30% 10%
0
1
2
3
4
5
6
7
8
9
10
119
107
96
86
78
71
65
59
55
51
47
119
104
90
79
70
63
57
52
47
43
40
119
100
86
74
65
57
51
46
42
38
35
116
105
94
85
77
70
64
59
54
50
46
116
102
89
78
70
62
56
51
47
43
40
116
99
85
73
64
57
51
46
42
38
35
111
101
91
82
74
68
62
57
53
49
46
111
98
86
77
68
61
55
50
46
42
39
111
96
83
72
63
56
51
46
41
38
35
R C R
50% beam -
61.9°
10% beam -
96.6°
Mounting
Height
Inital FC
Center
Beam Diameter FC Diameter FC
8.0
10.0
12.0
14.0
16.0
10.5
5.7
3.5
2.4
1.7
6.6
9.0
11.4
13.8
16.2
5.3
2.8
1.8
1.2
0.9
12.3
16.8
21.3
25.8
30.3
1.1
0.6
0.4
0.2
0.2
ENERGY DATA*
Lumens 620
Min. starting temp -18°C (0°F)
EMI/RFI FCC Title 47 CFR, Part 15, Class B
Sound rating Class A standards
Input voltage 120V
Min. power factor 0.80
Input frequency 50/60 Hz
Rated wattage 8.9W
Input power 8.9W
Input current .08A
*Values at non-dimming line voltage.
ADDITIONAL DATA
COMPATIBLE DIMMER SWITCHES
Manufacturer Model/Series Part Numbers
Synergy ISD ISD I 120 600++
Pass & Seymour
Harmony D703PTCCCV6
TradeMaster T600WV
Wide Slide Series WS700TCCCV6
Lutron
Diva DV-600PR
Toggler TGLV-600PR
Toggler TGLV-600PR
Leviton
Decora 6674-P
Decora 6633P
Illumatech IPI06++
Illumatech IPL06++
TRIMATRON 6681++
TRIMATRON 6684++
++ Must have at least 60W on dimmer circuit or 4 P Series LED downlighting modules.