Embed Size (px)
Citation preview
Morells Barn • Park Lane • Lower Bognor Road • Lagness • Chichester • West Sussex • PO20 1LR
Telephone: +44 (0) 1243 265845 • Facsimile: +44 (0) 1243 267582
Email: [email protected] • www.claymansupplies.co.uk
PRODUCT INFORMATIONPRODUCT INFORMATIONPRODUCT INFORMATIONPRODUCT INFORMATION
Product Information Page 1
6996/16996/16996/16996/1 –––– W681 RECOVERY TRAP W681 RECOVERY TRAP W681 RECOVERY TRAP W681 RECOVERY TRAP –––– 2.3 2.3 2.3 2.3 litrelitrelitrelitre
Key Benefits
• Adapts easily to existing plumbing, wherever there is a “U” bend.
• Enclosed bottle means less odours emitted from trap
• Strong vulcathene bottle means the trap is resistant to boiling water and robust use.
Replacing the bottles takes minutes, from start to finish, with no tools, minimal risk of spillage,
Easily emptied, by unscrewing the base from the trap, this large capacity anti-siphonic dilution recovery
trap has a 76mm liquid seal and holds 2.3 litres. The 1.5” BSP inlet includes a loose nut coupling for
connection to a waste outlet or drip cup tail. The trap is also supplied with a 38mm inlet and outlet
adaptor for convenience installation to a 38mm standard waste pipe.
Product Information Page 2
Dimensions:
• Depth: 400mm
• Height: 325mm
• Weight: 480g
The W681 Recovery Trap is an innovative, inexpensive solution to preventing clay and glaze materials
blocking waste pipes. The system easily fits most standard sink cabinet areas and is easily maintained
in minutes. Recommended for light to medium use.
The W681 Trap is easily installed. The trap is connected below the sink and collects solids in a bottle.
Bottle exchange is rapid and done without the need of tools.
The W681 Recovery Trap comes complete with:
• 1 x W681 Trap Head
• 1 x 2.3litre Bottle
An adaptor is required to reduce the outlet fitting to a standard 38mm waste pipe.
