R

693 | Supertrak69

3Screen Size:

Net EnginePower:

Portability:

Operating Weight:

6100mm x 1524mm20’ x 5’

75 kW @2200rpm100HP

Tracked

32,000 kgs70550 lbs*

* with tipping grid

Supe

rtra

k

39

Specifications

693

Hopper and Grid

Remote tipping grid as standard

Grid opening: 4250mm (14')

Feed with wing plates: 4765mm (15'8")

Feed height: 3670mm (12')

Grid aperture: 100mm (4"), 150mm (6")

Hopper capacity: 8m3 (10.48yd3)

Main Conveyor

1200mm(47"), EP 400, 3 Ply, plain beltDrum centres: 12000mm (39'4")Drive with steel skirting630cc/REV MotorBelt speed: 92mpm (302’ per min)

Screen Box

20’ x 5’ (6.1m x 1.52m) 2-deck-2 bearing high performance screenbox6096mm x 1524mm (20' x 5')top deck (side tensioned) with 5 x meshes@ 1219mm x 1524mm (4' x 5')4880mm x 1524mm( 16' x 5')bottom deck (end tensioned) with 2 x meshes@ 2350mm x 1500mm (8' x 5')Access catwalk at both sides and top end of screenScreen speed: 1150rpmScreen motor: Cast Iron 73cc/revSpreader plateHydraulic angle adjustment between 18º and 30º

Fines Conveyor

1200mm (47"), EP 400, 3ply, plain BeltDrum centres: 8075mm (26'6")800cc/REV MotorStockpile capacity: 217m³ (284yd3)Discharge height: 4980mm (16'4")Belt:speed: 92mpm (302’ per min)

Side Conveyor

800mm (31”), EP 400, 3ply,chevron belt with variable belt speedDrum centres: 9600mm(31'6")500cc/REV MotorStockpile capacity: 193m³ (252yd3)Discharge heights: 4725mm (15'6”)

R

Specifications

Power Unit / Hydraulics

Engine: Deutz water cooled – output 75kW @ 2200rpm (100HP)

Pump 1:Triple 33cc/rev,33cc/rev, 26cc/revThe first section drives either the right track or splitto drive the middle grade & oversize conveyorsThe second section drives either the left track or themain conveyorThe third section drives the beltfeeder

Pump 2:45cc/rev effectiveThis pump drives the fines conveyor and screen

Pump 3: 26cc/rev effectiveThis pump operates the vibrating or tipping grid

Fuel Consumption:20.8 litres/hour4.6 UK gal/hour5.5 US gal/hour)

Standard Optional

40

Tank Capacities

Hydraulic Tank Capacity:500 litres 110 UK gal 132 US gal

Fuel Tank Capacity:324 litres 71 UK gal 85 US gal

- Deutz water-cooled engine (75kW/100HP)- 1200mm (48") wide variable speed belt feeder- 4.25m (14') wide hopper - 7.0m3 (9.16yard3) capacity- Remote control hydraulic tipping reject grid c/w grouser bars4.25m x 100mm spacing (14'-0" x 4")- 6.1m x 1.52m (20' x 5') top deck screen and4.88m x 1.52m (16' x 5') bottom deck screen- No mesh or speedharps included for any deck (but all mesh fitting partsincluded as standard)- Catwalk around screen c/w handrail, kick board and access ladder- Quick wedge tensioning - top deck- 1200mm (48") wide plain belt on main conveyor- 1200mm (48") wide fines belt- 800mm (32") wide chevron belt on both side conveyors- Skirting on main conveyor- Heavy duty undercarriage unit with 500mm wide tracks- Control operation of tracks via hand-held set with 5m connection lead withheavy duty square connector- Guards to M & Q specification- Low level central greasing & emergency stops (4)

No grid with hopper deadplate fitted - 100mm Single deck vibrating grid c/w abbrasion resistant plate on wearsurface of T Bars - 100mm Double deck vibrating grid c/w abbrasion resistant plate on wearsurface of T Bars top dk and mesh in bottom deck - Hopper inlet chute fromcrusher(only available with 12’0’’ tipping grid & vibrating grids) - Dust covers on main and fines belt - Dust suppression system on fines belt - Radio remote control of machine movement - Hydraulic tensioning (bottom deck screen mesh) - Top deck mesh - Bottom deck mesh/speedharp - 68 grade hydraulic oil - Special paint colour (if different from Finlay Orange RAL 2002) ,RAL nr must be specified on order

- Extra 12’ x 5’ / 10’ x 5’ screen box mounted on hopper when no grid fittedcomplete with access catwalk and 1000mm wide feed conveyor. CAT C 4.4engine required - select below option. (separate transport required)- CAT water-cooled engine (97kW/130HP) c/w Scavenger pre-cleaner system - Higher spec pre-cleaner system (scavenger) for Deutz water-cooled engine - Deutz Cold Start kit - Cold climate Lubrication kit - 1 nr 532 stockpiler drive (only available when no vibrating grid fitted)

Belt Feeder

1200mm (47"), EP 630, 4ply,6+2mm covers, Plain beltDrum centres: 4280mm (14'1")Hydraulic variable speed drivePlanetary gearbox driveBelt speed 0-16MPM (0-53’ per min)

Undercarriage

3800mm sprocket centres with500mm wide track shoes.Gradability %: 25%Heavy duty tracks & gearboxes with integratedbrake and overcentre valveTrack movement over dog lead or radio remote

R

41

Transport Position

Working Position

Also Available-

693 wheeled693 Tracked and Wheeled

3.0m (9’10”)

3.4m

(11’

2”)

18.m (61’)

19.4m (63’ 10”)

6.2m

(20’

4”)

17.7

m (5

8’2”

)

R

Effective 01: 01, 2008. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are forillustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manualwhen using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard writtenwarranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marksor trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex® is a registered trademark of Terex Corporation inthe USA and many other countries. Copyright 2008 Terex Corporation.

FormREF: CFNOV07issue01/01

Terex Finlay Drumquin Road, Omagh Co. Tyrone N.Ireland BT78 5PN Tel: + 44 (0) 28 82 418 700 Fax: + 44 (0) 28 82 244 294 E-mail: sales@terexfinlay.com Web: www.terexfinlay.com

42

Dimensions

42