Upload
nickzor90
View
176
Download
2
Embed Size (px)
Citation preview
Below you will find the assessment items as presented on the exam as well as the scoring rules associated with the item.
Cisco Networking Academy content is copyrighted and the unauthorized posting, distribution or sharing of this exam content is prohibited.
Close Window
Assessment System
Exam Viewer - ENetwork Final Exam - CCNA Exploration: Network Fundamentals (Version 4.0)
1 Which OSI layer manages data segments?
application layer
presentation layer
session layer
transport layer
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 4.1.3 Supporting Reliable Communication
2
Refer to the exhibit. The diagram represents the process of sending e-mail between clients. Which list correctly identifies the component or protocol used at each numbered stage of the diagram?
1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA
1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA
1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA
1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 3.3.3 E-mail Services and SMTP/POP Protocols
3 A user enters http://www.cisco.com/web1.htm in the address line of a browser. Which statement is true about this transaction?
The "http" portion indicates the protocol that is being used.
The "web1.htm" portion is the specific service name.
The retrieved web page will be displayed in URL code.
The "www.cisco.com" is the name of the web page file that is called.
Observable Description Max Value
1 correctness of response2 points for Option 1 0 points for any other option
2
This item references content from the following areas:
٢٢Cisco Networking Academyمن ١صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
CCNA Exploration: Network Fundamentals
l 3.3.2 WWW Service and HTTP
4 Which range of port numbers are reserved for services that are commonly used by applications that run on servers?
0 to 255
0 to 1023
1024 to 49151
49152 to 65535
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 4.1.5 Port Addressing
5 Which OSI layer offers ordered data reconstruction services?
application layer
network layer
presentation layer
session layer
transport layer
Observable Description Max Value
1 correctness of response2 points for Option 5 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 4.1.2 Controlling the Conversations
6 Which two functions of the OSI model occur at layer two? (Choose two.)
physical addressing
encoding
routing
cabling
media access control
Observable Description Max Value
1 correctness of responseOption 1 and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required.
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 7.1.1 Data Link Layer - Supporting and Connecting to Upper Layer Services
7 Which information is used by the router to determine the path between the source and destination hosts?
the host portion of the IP address
the network portion of the IP address
host default gateway address
the MAC address
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 2.5.3 Getting the Data through the Internetwork
8 A network has grown too large for technicians to configure network addresses and hosts files for name resolution. Which two application layer services should be added to the server to allow these needs to be satisfied dynamically? (Choose two.)
DNS
FTP
٢٢Cisco Networking Academyمن ٢صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
DHCP
HTTP
SMTP
Observable Description Max Value
1 correctness of responseOption 1 and Option 3 are correct. 1 point for each correct option. 0 points if more options are selected than required.
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 3.3.1 DNS Services and Protocol l 3.3.5 DHCP
9
Refer to the exhibit. Which Layer 2 protocol could be used inside nework A and network C?
IP
TCP
UDP
Ethernet
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 9.1.5 Physical Implementations of Ethernet
10 Which option shows the PDU that contains the Layer 3 source and destination addressing for a packet?
٢٢Cisco Networking Academyمن ٣صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 5.1.7 IP v4 Packet Header
11 A technician is setting up a workgroup for six users and wants to allow users to share files without setting up a server. Which application layer protocol will provide for peer-to-peer file sharing in a workgroup?
DNS
SMB
HTTP
DHCP
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 3.3.6 File Sharing Services and SMB Protocol
12 What are three characteristics of CSMA/CD? (Choose three.)
Devices listen to the media and transmit data only when they cannot detect another signal on the media.
All devices on the media can hear all communications.
Devices communicate based on a configured priority.
After a collision occurs, the devices that caused the collision have first priority when attempting to retransmit.
When a collision occurs, all devices stop transmitting for a randomly generated period of time.
CSMA/CD uses a token system to avoid collisions.
Observable Description Max Value
1 correctness of responseOption 1, Option 2, and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required.
3
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 7.2.2 Media Access Control for Shared Media
13 Which device should be used for enabling a host to communicate with another host on a different network?
switch
hub
router
host
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 5.3.3 A Gateway - The Way Out of Our Network
٢٢Cisco Networking Academyمن ٤صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
14
Refer to the exhibit. Assume all devices are using default configurations. How many subnets are required to address the topology that is shown?
1
3
4
5
7
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 10.3.2 How Many Networks?
15
Refer to the exhibit. When computer A sends a frame to computer D, what computers receive the frame?
only computer D
only computer A and computer D
only computer B, computer C, and computer D
all computers
Observable Description Max Value
1 correctness of response2 points for Option 1 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 9.6.3 Switches - Selective Forwarding
16 Which topology represents a collision-free environment?
٢٢Cisco Networking Academyمن ٥صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 9.6.2 Ethernet - Using Switches
17
Refer to the exhibit. Communication for hosts X and Y is restricted to the local network. What is the reason for this?
Host X is assigned a network address.
Host Y is assigned a multicast address.
Host X and host Y belong to different networks.
The gateway addresses are broadcast addresses.
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 6.2.1 Types of Addresses in an IPv4 Network
18 Which option shows how a router will route packets to a remote network?
٢٢Cisco Networking Academyمن ٦صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 5.3.4 A Route - The Path to a Network
19
Refer to the exhibit. What two facts can be determined about the exhibited topology? (Choose two.)
A single broadcast domain is present
Two logical address ranges are required.
Three broadcast domains are shown.
Four networks are needed.
Five collision domains exist.
Observable Description Max Value
1 correctness of responseOption 1 and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required.
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 10.1.1 Choosing the Appropriate LAN Device
20
٢٢Cisco Networking Academyمن ٧صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Refer to the exhibit. Host B attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured at the FastEthernet interface fa0/1 of the San Francisco router. The packet inside the captured frame has the source IP address 10.10.1.2, and the destination IP address is 10.31.1.20. What is the destination MAC address of the frame at the time of capture?
0060.7320.D632
0060.7320.D631
0040.8517.44C3
0009.B2E4.EE03
0010.C2B4.3421
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 7.4.1 Follow Data Through an Internetwork
21
Refer to the exhibit. A router, whose table is shown, receives a packet that is destined for 192.168.1.4. How will router treat the packet?
The packet will be dropped.
The packet will be forwarded via FastEthernet 0/0.
The packet will be forwarded to the destination host.
The packet will be forwarded to the 192.168.1.3 next-hop address.
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 5.3.7 Packet Forwarding - Moving the Packet Toward its Destination
٢٢Cisco Networking Academyمن ٨صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
22
Refer to the exhibit. A technician is working on a network problem that requires verification of the router LAN interface. What address should be pinged from this host to confirm that the router interface is operational?
127.0.0.1
192.168.64.196
192.168.254.1
192.168.254.9
192.168.254.254
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.3.4 Testing Gateway and Remote Connectivity
23
Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for Host A. What is a valid configuration for Host A?
IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2
IP address: 192.168.100.20; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.17
IP address: 192.168.100.21; Subnet Mask: 255.255.255.248; Default Gateway: 192.168.100.18
IP address: 192.168.100.22; Subnet Mask: 255.255.255.240; Default Gateway: 10.1.1.5
IP address: 192.168.100.30; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.1.1
IP address: 192.168.100.31; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.18
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 6.3.3 Assigning Addresses to Other Devices
٢٢Cisco Networking Academyمن ٩صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
24
Refer to the exhibit. A user wants to access the Internet from the PC. A part of the running configuration of the router is shown. Which default gateway IP address should be configured at the PC to enable this access?
10.1.192.1
10.1.192.2
10.1.192.54
192.31.7.1
Observable Description Max Value
1 correctness of response2 points for Option 1 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.3.4 Testing Gateway and Remote Connectivity
25
Refer to the exhibit. Which option correctly identifies the network address, range of host addresses, and the broadcast address for the network that contains host A?
Observable Description Max Value
2 points for Option 3
٢٢Cisco Networking Academyمن ١٠صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
1 correctness of response 0 points for any other option 2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 6.5.1 Basic subnetting
26 A network administrator subnets the network 192.168.1.0/24 into four subnets. Which option correctly addresses Router1 and host A into the second subnet created?
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 6.5.1 Basic subnetting
27 Which subnet mask will allow 2040 hosts per subnet on the IP network 10.0.0.0?
255.255.0.0
255.255.254.0
255.255.252.0
255.255.248.0
255.255.240.0
255.255.255.128
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 6.5.5 Calculating the Number of Hosts
28 An organization has been assigned network ID 10.10.128.0 and subnet mask 255.255.224.0. Which IP address range can be used for this organization?
10.10.128.0 to 10.10.160.255
10.10.128.0 to 10.10.159.255
10.10.128.0 to 10.10.192.255
٢٢Cisco Networking Academyمن ١١صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
10.10.128.0 to 10.10.0.159
10.10.128.0 to 10.10.159.0
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 10.4.1 Calculating Addresses: Case 1
29 Which table accurately associates the RFC 1918 private IP addresses with the correct network mask?
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 6.2.5 Public and Private Addresses
30 What is true regarding network layer addressing? (Choose three.)
uses a flat structure
prevent broadcasts
heirarchical
uniquely identifies each host
48 bits in length
contains a network portion
Observable Description Max Value
1 correctness of responseOption 3, Option 4, and Option 6 are correct. 1 point for each correct option. 0 points if more options are selected than required.
3
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 5.2.5 How Do We Separate Hosts Into Networks? - Hierarchical Addressing
31 A user sees the command prompt: Router(config-if)# . What task can be performed at this mode?
Reload the device.
Perform basic tests.
Configure individual interfaces.
٢٢Cisco Networking Academyمن ١٢صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Configure individual terminal lines.
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.1.7 IOS Configuration Modes
32 Which memory contents will change as a result of using the Router# erase startup-config command on a router?
RAM
ROM
flash
NVRAM
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.2.3 Managing Configuration Files
33 Which exhibit shows the interface that is configured by the command, router(config)# interface serial 0/0/1?
٢٢Cisco Networking Academyمن ١٣صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Observable Description Max Value
1 correctness of response2 points for Option 5 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.2.4 Configuring Interfaces
34 Two routers are connected via their serial ports in a lab environment. The routers are configured with valid IP addresses, but they cannot ping each other. The show interface serial0/0 command shows that the serial0/0 interface is up but the line protocol is down. What could be the cause of this problem?
The no shutdown command has not been applied to the interfaces.
The clock rate command has not been entered on the DCE interface.
The interface timers are not cleared.
The FastEthernet interface is emulating a serial interface by assigning it a timing signal.
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.4.2 Capturing and Interpreting Trace Information
35 What is the Cisco IOS?
system software for Cisco devices
Read Only Memory in Cisco devices
non-volatile storage for device configurations
an initial operating system that is used for boot functions
Observable Description Max Value
1 correctness of response2 points for Option 1 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.1.1 Cisco IOS
36
Refer to the exhibit. Which option shows the correct topology given the configuration of Router1?
٢٢Cisco Networking Academyمن ١٤صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Observable Description Max Value
1 correctness of response2 points for Option 1 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.2.4 Configuring Interfaces
37
Refer to the exhibit. An administrator made several changes to the configuration of the router but did not accomplish the desired result. To undo the changes the reload command was used. What will happen if the administrator answers yes to the prompt?
The changes will be lost and the configuration file in RAM will be loaded.
The changes will be saved and the configuration file in RAM will be loaded.
The changes will be lost and the configuration file in NVRAM will be loaded.
The changes will be saved and the configuration file in NVRAM will be loaded.
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.2.3 Managing Configuration Files
38 Which statement is true about router hostnames?
A hostname should be unique on each router.
A router hostname cannot contain capital letters.
A router hostname is configured in privileged executive mode.
A router hostname must be created before any other configurations can be added to the device.
Observable Description Max Value
1 correctness of response2 points for Option 1 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.2.1 Devices Need Names
39
٢٢Cisco Networking Academyمن ١٥صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Refer to the exhibit. A network technician has made several changes to R1 since the configuration has last been saved. The modified configuration did not produce the desired changes. The technician wants to store a backup copy of the saved configuration on a TFTP server before reloading. Which action will cause the unmodified data to be saved on the TFTP server?
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.2.3 Managing Configuration Files
40
Refer to the exhibit. An employee wants to access the organization intranet from home. Which intermediary device should be used to connect the organization intranet to the Internet to enable this access?
hub
switch
router
٢٢Cisco Networking Academyمن ١٦صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
wireless access point
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 1.5.1 Where Is It All Going?
41 Which physical component is used to access and perform the initial configuration on a new unconfigured router?
Observable Description Max Value
1 correctness of response2 points for Option 2 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.1.1 Cisco IOS
42
٢٢Cisco Networking Academyمن ١٧صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Refer to the exhibit. A PC is communicating with another PC on a remote network. The two networks are connected by three routers. Which action will help to identify the path between the hosts?
Use the ipconfig command at the host.
Use the ipconfig/all command at the destination.
Use the tracert command at the host.
Use the ping command at the destination.
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 6.6.4 Traceroute (tracert) - Testing the Path
43
Refer to the exhibit. RouterB is configured properly. The Ethernet interface Fa0/0 of RouterA is configured with the use of the commands that are shown. However, a ping from the Fa0/0 interface of RouterA to the Fa0/0 interface of RouterB is unsuccessful. What action should be taken on RouterA to solve this problem?
Use the description command on the FastEthernet interface Fa0/0.
Configure the clock rate of the FastEthernet interface Fa0/0.
Use the no shutdown command on the FastEthernet interface Fa0/0.
Reboot the router.
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.3.2 Testing the Interface Assignment
44
Refer to the exhibit. A PC is connected to a network. Which action will verify that the PC can communicate with its default gateway?
Use the ping 127.0.0.1 command.
Use the ipconfig command.
Use the ipconfig/all command.
Use the ping 10.0.0.254 command.
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
٢٢Cisco Networking Academyمن ١٨صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
CCNA Exploration: Network Fundamentals
l 6.6.2 Ping Gateway - Testing Connectivity to the Local LAN
45 How can ARP be used to help document the network?
It can list each hop on the way to a destination host.
It can show the average latency of hosts on the network.
It can provide a list of physical addresses on the network.
It can indicate which hosts are not responding to network traffic.
Observable Description Max Value
1 correctness of response2 points for Option 3 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.4.3 Learning About the Nodes on the Network
46
Refer to the exhibit. Host A is unable to reach host B on the remote network. A technician attempted to ping the local gateway and the ping was successful. To verify the host configuration, the technician issued the ipconfig command. What is the likely cause of the problem?
The local NIC is incorrectly configured.
The subnet mask on host A is incorrectly configured.
The IP address on host A is incorrectly configured.
The default gateway on host A is incorrectly configured.
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.3.5 Tracing and Interpreting Trace Results
47
Refer to the exhibit. A student has wired each end of a CAT 5e cable as shown. What is the result? (Choose two.)
The cable is unusable and must be rewired.
٢٢Cisco Networking Academyمن ١٩صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
The cable is suitable for use as a rollover cable.
The cable is suitable for use as a Fast Ethernet crossover.
The cable is suitable for use as a Gigabit Ethernet straight-through.
The cable is suitable for use between two 100 Mbps Auto-MDIX capable switches.
Observable Description Max Value
1 correctness of responseOption 3 and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required.
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 10.2.2 Making LAN Connections
48 Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 10.2.3 Making WAN Connections
49
Refer to the exhibit. Which diagram depicts the path through the network that is represented in the output of the tracert command?
٢٢Cisco Networking Academyمن ٢٠صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 11.4.2 Capturing and Interpreting Trace Information
50
Refer to the exhibit. The command that is shown was issued on a PC. What does the IP address 192.168.33.2 represent?
٢٢Cisco Networking Academyمن ٢١صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht
IP address of the host
default gateway of the host
IP address of the homepage for the host
primary domain name server for the host
IP address of the website resolver1.mooki.local
Observable Description Max Value
1 correctness of response2 points for Option 4 0 points for any other option
2
This item references content from the following areas:
CCNA Exploration: Network Fundamentals
l 3.3.1 DNS Services and Protocol
Reset View
Showing 1 of 1 Prev Page: 1 Next
Close Window
All contents copyright ©2001-2009 Cisco Systems, Inc. All rights reserved. Privacy Statement and Trademarks.
٢٢Cisco Networking Academyمن ٢٢صفحة
٠٩/٠٨/٣٢mhtml:file://D:\CCNA Exploration\CCNA1\CCNA 1\CCNA 1 Final 3.mht