Embed Size (px)
Citation preview
The Synthesis
of Experience
66 SeriesHigh Pressure Pumps
FromGeneral Pump
GP Companies, Inc.1174 Northland DriveMendota Heights, MN 55120Tel: 651.454.6500 Fax: 651.454.8015Email: [email protected]
General Pump is part ofthe Interpump Group, theworld leader in plunger pumps.
Pressure CleaningApplicationsPre-painting SurfacePreparation:Surface cleaningPaint removalWet-sandblasting
Heavy EquipmentMaintenance:Dirt and mud removalGrease and oil removalParts washing
Contract Cleaning:Sidewalk cleaningDriveway cleaningGeneral cleaning
Industrial ApplicationsMisting/Fogging:Evaporative coolingFire suppressionTower coolingPower generation
Industrial Process:Hydraulic ram/press operationHydrostatic testing
Industrial Cleaning:General cleaningSurface strippingScale removalIndustrial pressure washTrailer mount systemsIn-plant stationary systemsLarge portable systems
Food Processing:Poultry deboningSanitation
66 Series - The Synthesis of Experience 66 Series - The Synthesis of Experience
66 Series Applications
Max. Inlet Pressure: 125 PSIMax. Fluid Temperature: 1560FInlet Port Thread: 1/2”-14 BSP-FDischarge Port Thread: 3/8”-19 BSP-FShaft Diameter: .945 in.24 mmMin. Inlet Pressure: 30 PSICrankcase Oil Capacity: 31.0 oz.
Pump ModelsOVERALL PUMP DIMENSIONS: 13.84” x 9.8” x 7.7”
TSP1621Flow: 4.3 GPM
Pressure: 5800 PSIRPM: 1450
Bore: .630 in./16 mmStroke: .826 in/21 mm
HP: 17.1 EBHP
Flow: 5.0 GPMPressure: 5000 PSI
RPM: 1450Bore: .709 in./16 mm
Stroke: .472 in./19 mmHP: 17.4 EBHP
TSP1819
Flow: 5.5 GPMPressure: 5000 PSI
RPM: 1450Bore: .709 in./18 mm
Stroke: .826 in./21 mmHP: 18.9 EBHP
TSP1821
Valve Poppets AreMachined Not Stamped• Better surface finish• No cracking• No stress points from stamping• More durable, long lasting valve
Stress Is All In Stack
No Inlet Valve Plug• Increased hydrostatic• Increased durability
Stacked Valve Designfor Better Efficiency(see valve above)• Efficient water inlet• Closer to plunger
White ceramic plungers• 99% alumina-ceramic• Competitors plungers are only 97%• Increases resistance to pitting and wear
16 or 18 mm plungers• Offers wider range of flows and pressures
Improved low and highpressure seals• Increases life• Reduces maintenance
Valve Plugs vs Plate• Easy access to single valve• Quick repair/maintenance
Piston guide bushings inan exclusive teflon, graphiteand bronze• Superior strengh• Easily replaceable• Smoothest possible surface results in longer seal life
Forged crankshaft• Increases load potential• Reduces fatigue
Exclusive and innovativeplunger guide design allows foreven greater ceramic thickness• Decreases possibility of cracking from thermal shock
Oversized 2-piece white bronzeconnecting rods w/ 2, 8 mm boltsand special oil reservoirs• Increases strength and stability• Friction and heat reduction extends life
O-ring groove in crankcase vs cover• Eases installation• Increases strength of rear cover
31.04 oz. oil capacity• Better cooling
Fully anodized crankcase• Better protection against environment
Two sight glasses• Easier to monitor oil levels• One is bayonet style for easy replacement
Oversized cylindricalroller bearings• Higher load capabilities• Increases life of pump
Nickel plated plunger guides• Smoothest possible surface results in longer seal life• Superior strengh
Replaceable Inlet Valve Seat• Protects manifold from cavitation damage
