Upload
farrukhmohammed
View
102
Download
1
Embed Size (px)
DESCRIPTION
651
Citation preview
Page 1 Revision 1.0
Tel: 201-342-3338 Fax: 201-342-3339 www.cciproducts.com
General Information
CCI’s 700 MHz DAS Interface Tray provides an integrated, con-venient, and sin-gle connection point when using single or multiple LTE base stations with a common DAS system. The
unique architecture of the CCI DAS Interface Tray can accom-modate both MIMO and SIMO configurations, including two op-erators providing MIMO coverage on a common MIMO DAS Sys-tem. The internal triplexers utilized in the Interface Tray can si-multaneously cover both ‘Upper’ and ‘Lower’ 700 MHz band such that the same Interface Tray can be used for either band implementation. The DAS Interface Tray is a modular design consisting of a 2U 19” rack mount tray with up to two modules that can be configured to support all the possible MIMO and SIMO deployment configurations.
Integrated leveling controls are provided in both the uplink and downlink path in order to achieve the proper link balance to the DAS system for each base station channel. The LTE E-Node B’s are connected directly to the DAS Interface Tray without the need to attenuate power as the DAS tray provides integrated high power attenuation for each channel with an adjustment range of 30dB with 1 dB increments. The DAS Tray is a com-pletely passive assembly with no external power requirement thus providing the highest reliability and convenient installation.
General Information 1
“Simple” Configuration Diagrams
2 - 3
Module “A” & Module “B”
Block Diagrams 3
Electrical & Mechanical
Specifications 4 - 5
“Detailed” Configuration
Diagrams 6 - 8
Ordering Information, Options, 10
Module “A” & Module “B”
Outline Diagrams 10
Contents
Model DAST-700-MODA Model DAST-700-MODB Model TRA-700-DAS
CCI Confidential
700 MHz LTE MIMO / SIMO DAS Interface Tray
Key Features: A common connection
point for Upper and Lower Band LTE Bases-tations to a single DAS system
Levels and equalizes performance for all base stations
Modules “A” and “B” are 2U (3.75”) High and mount in a 19” Rack Mount Tray
Integrated Level Con-trols
No need to attenuate signals prior to connec-tion to the DAS Tray
Page 2 Revision 1.0
“Simple” LTE MIMO and SIMO Configuration Diagrams
Communication Components Inc. 700 MHz LTE MIMO / SIMO DAS Interface Tray
Figure I - Shared Dual MIMO E-Node B Configuration with MIMO Output to DAS System
Figure III - Single SIMO E-Node B Configuration with SIMO Output to DAS System
Figure II - Single MIMO E-Node B Configuration with MIMO Output to DAS System
Figure IV - Shared SIMO E-Node B Configuration with SIMO Output to DAS System
Page 3 Revision 1.0
“Detailed” Module “A” and Module “B” Block Diagrams
“Simple” LTE MIMO and SIMO Configuration Diagrams
Communication Components Inc. 700 MHz LTE MIMO / SIMO DAS Interface Tray
Figure V - Single MIMO E-Node B Configuration with SIMO Output to DAS System
Figure 1 - Module “A” Block Diagram Figure 2 - Module “B” Block Diagram
C o m m u n i c a t i o n C o m p o n e n t s I n c . Tel: 201-342-3338 Fax: 201-342-3339 CCI Confidential
All specifications are subject to change. The latest specifications are available at www.cciproducts.com
FXD ATN
VAR ATN
TX RX
COM
DUPLEXER 700 U or L
2-WAY COMBINER
VAR ATN
4-WAY SPLITTER
TX/RX (7/16- DIN)
RX (7/16 - DIN)
RX (N)
RX (7/16 - DIN)
(QMA) TX OUT to DAS
(N) TX IN
(QMA) RX IN
to DAS
FXD ATN
TX RX
COM
DUPLEXER 700 U or L
TX/RX (7/16 - DIN)
(N) TX OUT
(N) RX IN
Page 4 Revision 1.0
Communication Components Inc. 700 MHz LTE MIMO / SIMO DAS Interface Tray
C o m m u n i c a t i o n C o m p o n e n t s I n c . Tel: 201-342-3338 Fax: 201-342-3339 CCI Confidential
700 MHz DAS Interface Module “A” Typical Specifications
Description Typical Specifications
RF Electrical
RX Operating Frequency Range (Lower Band) 698 - 716 MHz
RX Operating Frequency Range (Upper Band) 776 - 798 MHz
TX Operating Frequency Range (Lower & Upper Band) 728 - 768 MHz
Return Loss 18 dB Min. (All Ports)
Insertion Loss
Transmit Passband
TX/RX to TX OUT 16 dB to 46 dB, adjustable in 1 dB steps
TX IN to TX OUT 3 dB to 33 dB, adjustable in 1 dB steps
Receive Passband
RX IN to TX/RX 7.5 dB average
RX IN to RX 6.5 dB
Filter Characteristics
Transmit Isolation
TX/RX to RX IN 65 dB with attenuator set to 0 dB
TX/RX to RX 80 dB
Continuous Average Power 40 Watts Max. at TX/RX port
Peak Envelope Power 2 KW Max.
Intermodulation Performance
IMD at TX/RX port in RX Band -118 dBm typical (2 tones at +43 dBm)
Mechanical
TX/RX IN Connectors 7/16 DIN-Female - 1
RX IN Connectors 7/16 DIN-Female - 2; N-Female - 1
TX IN Connectors N-Female - 1
Dimensions 3.5” (2U) H x 8.772” W x 16” D
Weight 17.5 Pounds
Environmental
Operating Temperature Range 0º C to +55º C
MTBF > 500,000 Hours
Mounting 19” Rack Mount (Up to two Modules “A” or “B” can
fit in a single 2U 19” rack mount tray)
TX OUT (to DAS), RX IN (from DAS) Connectors QMA-Female - 1 each
All specifications are subject to change. The latest specifications are available at www.cciproducts.com
Page 5 Revision 1.0
Communication Components Inc. 700 MHz LTE MIMO / SIMO DAS Interface Tray
C o m m u n i c a t i o n C o m p o n e n t s I n c . Tel: 201-342-3338 Fax: 201-342-3339 CCI Confidential
700 MHz DAS Interface Module “B” Typical Specifications
Description Typical Specifications
RF Electrical
RX Operating Frequency Range (Lower Band) 698 - 716 MHz
RX Operating Frequency Range (Upper Band) 776 - 798 MHz
TX Operating Frequency Range (Lower & Upper Band) 728 - 768 MHz
Return Loss 18 dB Min. (All Ports)
Insertion Loss
Transmit Passband
TX/RX to TX OUT 14 dB average
Receive Passband
RX IN to TX/RX 1 dB average
Filter Characteristics
Transmit Isolation
TX/RX to RX IN 60 dB
Continuous Average Power 40 Watts Max. at TX/RX port
Peak Envelope Power 2 KW Max.
Intermodulation Performance
IMD at TX/RX port in RX Band -118 dBm typical (2 tones at +43 dBm)
Mechanical
TX/RX IN Connectors 7/16 DIN-Female - 1
RX IN Connectors N-Female - 1
TX IN Connectors N-Female - 1
Dimensions 3.5” (2U) H x 8.772” W x 16” D
Weight 16.5 Pounds
Mounting 19” Rack Mount (Up to two Modules “A” or “B” can fit in a single 2U 19” rack mount tray)
Environmental
Operating Temperature Range 0º C to +55º C
MTBF > 500,000 Hours
All specifications are subject to change. The latest specifications are available at www.cciproducts.com
Page 6 Revision 1.0
C o m m u n i c a t i o n C o m p o n e n t s I n c . Tel: 201-342-3338 Fax: 201-342-3339
“Detailed” LTE MIMO and SIMO Configuration Diagrams
Communication Components Inc. 700 MHz LTE MIMO / SIMO DAS Interface Tray
CCI Confidential
All specifications are subject to change. The latest specifications are available at www.cciproducts.com
Figure I - Shared Dual MIMO E-Node B Configuration with MIMO Output to DAS System
Figure II - Single MIMO E-Node B Configuration with MIMO Output to DAS System
Page 7 Revision 1.0
C o m m u n i c a t i o n C o m p o n e n t s I n c . Tel: 201-342-3338 Fax: 201-342-3339
“Detailed” LTE MIMO and SIMO Configuration Diagrams
Communication Components Inc. 700 MHz LTE MIMO / SIMO DAS Interface Tray
CCI Confidential
All specifications are subject to change. The latest specifications are available at www.cciproducts.com
Figure III - Single SIMO E-Node B Configuration with SIMO Output to DAS System
FXD ATN
VAR ATN
TX RX
COM
DUPLEXER 700 U or L
2-WAY COMBINER
VAR ATN
4-WAY SPLITTER
TX1 OUT to
DAS
RX1/RX2 IN from DAS
Module A
TX1/RX1
TX1/RX1
SIMO E-NODE B
RX2
RX2
Figure IV - Shared Dual SIMO E-Node B Configuration with SIMO Output to DAS System
FXD ATN
VAR ATN
TX RX
COM
DUPLEXER 700 U or L
2-WAY COMBINER
VAR ATN
4-WAY SPLITTER
TX1/TX2 OUT to
DASTX2 IN
RX1/RX2 IN from
DAS
Module A
FXD ATN
TX RX
COM
DUPLEXER 700 U or L
TX2 OUT
RX2 IN
Module B
TX1/RX1
TX1/RX1
SIMO E-NODE B
RX2
RX1RX2 TX2/RX2
TX2/RX2
SIMO E-NODE B
RX1
RX2
Page 8 Revision 1.0
C o m m u n i c a t i o n C o m p o n e n t s I n c . Tel: 201-342-3338 Fax: 201-342-3339
“Detailed” LTE MIMO and SIMO Configuration Diagrams
Communication Components Inc. 700 MHz LTE MIMO / SIMO DAS Interface Tray
CCI Confidential
All specifications are subject to change. The latest specifications are available at www.cciproducts.com
Figure V - Single MIMO E-Node B Configuration with SIMO Output to DAS System
FXD ATN
VAR ATN
TX RX
COM
DUPLEXER 700 U or L
2-WAY COMBINER
VAR ATN
4-WAY SPLITTER
TX1/TX2 OUT to
DASTX2 IN
RX1/RX2 IN from
DAS
Module A
FXD ATN
TX RX
COM
DUPLEXER 700 U or L
TX2 OUT
RX2 IN
Module B
TX1/RX1
TX1/RX1
MIMO E-NODE B
TX2/RX2
RX2 TX2/RX2
Page 9 Revision 1.0
89 Leuning Street South Hackensack, NJ 07606
Tel: 201-342-3338 Fax: 201-342-3339 www.cciproducts.com
Ordering Information: I. Shared Dual MIMO E-Node B
Configuration with MIMO Output to DAS System A) DAST-700-MODA (Qty. 2) B) DAST-700-MODB (Qty. 2) C) TRA-700-DAS (Qty. 2)
II. Single MIMO E-Node B Configuration with MIMO Output to DAS System A) DAST-700-MODA (Qty. 2) B) TRA-700-DAS (Qty. 1)
III. Single SIMO E-Node B Configuration with SIMO Output to DAS System A) DAST-700-MODA (Qty. 1) B) TRA-700-DAS (Qty. 1)
IV. Shared Dual SIMO E-Node B Configuration with SIMO Output to DAS System A) DAST-700-MODA (Qty. 1) B) DAST-700-MODB (Qty. 1) C) TRA-700-DAS (Qty. 1)
V. Single MIMO E-Node B Configuration with SIMO Output to DAS System A) DAST-700-MODA (Qty. 1) B) DAST-700-MODB (Qty. 1) C) TRA-700-DAS (Qty. 1)
700 MHz DAS Interface Module “A” & Module “B” Outline Drawing
700 MHz DAS Tray Outline Drawing
8.278”
15.98”
8.772”
3.47”
Module “A” Outline Drawing Module “B” Outline Drawing
8.278”
8.772”
3.47”
17.48”
16.10” 15.98” 16.10”
17.17”
3.47”
8.78”
17.56”
2.76”
19.01” 16.38”
17.76”
14.76”
Model DAST-700-MODA “700 MHZ DAS Module A”
Model DAST-700-MODB “700 MHZ DAS Module B”
Model TRA-700-DAS Tray for 700 MHZ DAS Modules
Model Numbers: