or www.rssingapore.com 1�

Solid

State liG

htin

G (65) 6865 3433 (65) 6865 3444

Spectroradiometers also provide scotopic data (dark adapted eye response) which is of significance to LEDs due to their shift towards the blue end of the spectrum.

The SSLRC undertakes LED luminaire, signal and lamp testing and has been satisfying client requirements meticulously for over 4 years. Advanced and up-to-date photometric and radiometric measurement technology enables the SSLRC laboratories to assist in the development and testing of all LED based illumination products from traffic signals and street lighting through to architectural lights, commercial lighting and displays. Distinct from other lighting laboratories, the SSLRC has focused on assisting the LED industry by investing in equipment that provides rapid and consistent LED analysis with high degrees of repeatability, accuracy and confidence.

The SSLRC facility is one of only a handful of easy to access facilities dedicated to LED product design and testing. LEDs require specialised test and measurement equipment with initial capital costs beyond the reach of many companies. Fortunately the SSLRC can undertake LED photometric measurements include full luminance and illuminance measurements such as luminous flux, 2D imaging photometry, CRI, CCT and colour chromaticity coordinates.

As well as the formal testing services the SSLRC provides general technical advice and support to members of the general lighting industry, Energy Saving Trust, and other governmental and professional bodies.

Due to continuous SSLRC research into LED product development it has become a UK representative member of The Alliance for Solid-State Illumination Systems and Technologies (ASSIST) established in 2002 to advance the effective use of energy-efficient solid-state lighting and to speed its market acceptance.

Professionally trained staff undertake rigorous testing of all luminaires and LED products to most British Standards including:

• CIe 127 Measurement of LeDs• Bs eN 60598-1:2004 Luminaires. General requirements

and tests• Bs 12352 traffic Control equipment• IeC 60825-1 Laser classification• IeC 60825-4 Laser guard safety• Bs 873-1 road traffic signs and internally

illuminated bollards.• Bs 12899-1. fixed, vertical road traffic signs• Bs 5225-1. specification for photometric data

for luminaires.• eNs0310 environmental test spec for electronics

The SSLRC laboratories have specialist-testing equipment enabling a tailor-made service to suit every testing requirement.

The specialist facilities allow the laboratory to offer a wide range of non-LED lamp testing including conventional Tungsten lamp, Compact Fluorescent Lamp (CFL) with testing covering life and lumen maintenance measurements.

In addition full stress and soak testing facilities are available through several environmental testing chambers that enable the SSLRC to simulate the conditions that many LED products will be expected to operate throughout their lifecycle. Such facilities are vital for testing LED products and allow customers to test their LED products under extreme temperature and humidity ranges for prolonged periods to reveal potential modes of failure enabling a deeper understanding of the longevity performance of their products.In addition to providing comprehensive test and measurement facilities the SSLRC provides a range of specialist training courses for the lighting industry including:

• Colour photometric measurement: a beginners to intermediate course discussing colour and photometric measurement.

• LeD safety: Learn how to develop safe LeD-based products to comply with International standards such as IeC 60825/1:2001 and CIe 009:2002

If you are about to design, prototype or evaluate an LED product then please contact the SSLRC team to discuss how they could save you time with access to knowledgeable technical staff and state of the art facilities.

www.photonicscluster-uk.org

For more information see rS Catalogue, 1�

(65) 6865 3433 (65) 6865 3444iM

Pro

ved

Web

Sea

rCh

inG

Get the latest offer online

We’ve tranSForMed oUr WebSiteOur new rs Online boasts an upgraded search and navigation engine powered by endeca technologies, Inc., an information access software company. through a powerful search engine and abundant product information, the new website enables easier and quicker search, select and order of products from rs Online.

The development of the new websites has been driven from an in-depth review of customer’s needs. Hence, it is designed to bring you the best online experience, based upon guided navigation, exposed product pictures, range and attribute filters.

Showcasing more than 230,000 products online, over 1 million product attributes and related technical documents, you can make use of our better, faster and more efficient web tools to easily and accurately select the best products you need.

an improved and intuitive search & browse solution built upon enhanced data.

sort your list of search results by its attributes to compare the products - Making the choice is now even easier.

or www.rssingapore.com

(65) 6865 3433 (65) 6865 3444

1�

iMPro

ved

Web Sea

rCh

inG

(65) 6865 3433 (65) 6865 3444

Our live stock checker gives you the most up-to-date detail on product availability.

ProVidiNG you a oNE-stoP sHoP solutioN…as a leading distributor, we understand the importance of delivering what you need when you need it in a more cost effective way. as such, rs Online dynamically offers new products and technologies introduction on a daily basis. access multiple suppliers’ products and comparing them is just a mouse click away.

finding what you need has never been easier. explore www.rssingapore.com today!

six key attributes are displayed on the ‘search results’ for you to apply new filters to your search criteria.

enjoy better prices for ordering larger quantities of selected products. View up to 5 column prices on rs Online.

For more information see rS Catalogue, 1�

(65) 6865 3433 (65) 6865 3444

1�

NEW

PoW

er S

UPP

ly S

olU

tio

nS

Go online to view our extended range (er)

PoWer SUPPly SolUtionSNEWWe are pleased to announce an additional 741 new Power supply products from 17 manufacturers to address Design engineers’ demands for the latest technologies in higher wattage and power densities. these include products for the new and emerging technologies of Digitally Controlled Psus, Power over ethernet, Intermediate Bus architecture and energy efficient Power supplies.

Power over Ethernet PoE injectors and splitters With standard RJ45 Ethernet connections, PoE is a simple solution to save time and money when powering networks in buildings. Injectors provide a safe dc power source on spare data lines, whilst splitters can provide power to non-PoE devices within a PoE system.

intermediate bus architecture (iba) Intermediate Bus Architecture is an emerging solution for datacoms and telecoms systems where designers can employ consistent and cost effective power distribution using front end PSUs, bus converters and POL (Point of Load) converters. Programmable (Pol) ConvertersReceiving the Electronics Products 2006 product of the year award, this new range of integrated inductor dc-to-dc converters reduces footprint, parts count and noise, requiring only two ceramic capacitors to create a complete power solution.

digital (intelligent) ControlUsing I²C control, these new-to-market, intelligent PSUs provide a powerful, flexible and universal design tool that will give designers the ability to specify solutions precisely to individual needs.

Energy Efficiency Compliant Plug and desk top PsusAn increasing number of international codes of practice for PSU energy efficiency are being implemented. To match these requirements RS introduces a range of compliant plug top and desk top PSUs with improved energy efficiency meeting the CEC (California Energy Commission) regulations.

dEsk-toP, tower and rack mount PC Power suppliesPopular PC power supplies meet the North American 80 PLUS® certified scheme specified with 80% minimum efficiency, providing energy saving in a wide range of power outputs.

dC-dC ConvertersA large range of standard and innovative dc to dc converters for a variety of applications; Brandenberg with high voltage output for specialist medical and scientific instruments, Class B filtered supplies from Ideal Power and wide input devices with power outputs to 40 watts from Recom, Traco and the Austin Lynx series from Tyco Electronics.

diN rail power suppliesTrio Power single and three phase, high quality DIN rail PSUs with international certification suitable for networking and machine control in worldwide solutions.

or www.rssingapore.com

(65) 6865 3433 (65) 6865 3444

1�1�

(65) 6865 3433 (65) 6865 3444N

EWPo

Wer SU

PPly SolU

tion

S

PoWer SUPPly SolUtionSNEW

150-758 2.4-5.5Vdc i/p, 0.75-3.3Vdc 6A o/p $27.90

150-742 8.3-14Vdc i/p, 0.75-5Vdc 6A o/p $27.90

151-076 2.4-5.5Vdc i/p, 0.75-3.3Vdc 10A o/p $46.50

150-815 8.3-14Vdc i/p, 0.75-5Vdc 16A o/p $50.10

online at www.rssingapore.com ER

online at www.rssingapore.com ER151-458 QUS20 12Vdc 20A $144.00 177-747 250W Mini 1U PSU $95.00

220

177-810 90-264Vac i/p, 300W (max), 86 x 140 x 150mm $103.00

177-775 90-264Vac i/p, 400W (max), 86 x 140 x 150mm $149.00

177-797 90-264Vac i/p, 500W (max), 86 x 140 x 150mm $186.00

sWitCH modE ComPutEr PoWEr suPPliEs atx 12V V2.2

High efficient and reliable, multi-output power units with super low noise fan control and the benefit of active power factor correction

Active power factor correction: EN61000-3-2

Support Intel & AMD Socket

PCI Express & Serial ATA ready

High efficiency and reliability - 80 Plus certified

Double forward converter socket

Low ripple and noise

Super low noise fan control

Short circuit protection on all outputs

Over voltage and over power protection

Refer to catalogue/website for technical specification

•

••••••••••

220

234-935 10.8 – 15.6Vdc i/p $1,140.00

234-913 10.8 – 15.6Vdc i/p $1,140.00

234-979 21.6 – 30Vdc i/p $1,140.00

235-051 21.6 – 30Vdc i/p $1,140.00

online at www.rssingapore.com ER online at www.rssingapore.com ER248-170 9-36Vdc i/p, 3.3Vdc 6A o/p $130.00

248-215 18-75Vdc i/p, 5Vdc 4A o/p $130.00

248-192 9-36Vdc i/p, ±12vdc ±800mA o/p $136.00

248-344 18-75Vdc i/p, ±15Vdc ±650mA o/p $136.00

lsN2 sEriEs NoN-isolatEd sElECtablE outPut dC/dC CoNVErtErs

Miniature point-of-load switching DC/DC converters, ideal for powering CPUs, programmable logic and mixed voltage systems

User selectable outputs

Selectable phased start-up sequencing and tracking

Low output noise and ripple

Up to 52W total output power

Starts up into pre-biased load

RoHS compliant

•

••

••••

qus20 siNGlE outPut uNrEGulatEd PoWEr suPPliEs

High efficiency (96%), RoHS compliant, isolated power supplies with fixed conversion ratio designed to support immediate Bus Architecture for powering multiple downstream non-isolated, point-of-load converters

240W 48Vdc, 4:1 fixed conversion ratio

2.26kV input/output isolation

Over temperature and short circuit protection

Vertical mount

•

•••

•

1u raCk mouNt iNdustrial ComPutEr Psu

Industrial mini 1U rackmount PSU

Active power factor correction: EN61000-3-2

Follow Intel FLEX ATX power design guide

High efficiency and reliability - Efficiency meets 80 Plus specifications at 220V input

Forward converter socket

Low ripple and noise

Short circuit protection on all outputs

Over voltage and over power protection

Refer to catalogue/website for technical specification

••••

•••••

HiGH VoltaGE dC/dC outPut CoNVErtErs

New generation of miniature, regulated, high voltage modules for use in a wide range of medical, pharmaceutical, environmental and petrochemical applications

Buffered output voltage and current monitors

Internal reference

Remote output programming

Line regulation <75ppm/V

Load regulation <500ppm, zero to full load

•

•••••

20W siNGlE & dual outPut dC/dC CoNVErtErs

High efficiency, highly reliable devices with built-in EMC filter in a compact 1.6”x1” industry standard pin-out case

EMC to EN55022, Class B and FCC level B

Up to 88% efficiency

1.5kV input/output isolation

Enable control circuit, positive polarity

Input under voltage lock-out with auto turn-on

Output current limit and short circuit protection

Output over voltage/temperature protection

•

•••••••

For more information see rS Catalogue, 1�1�

tele

MeC

an

iqU

eenjoy better prices for larger quantities online

redUCed liFetiMe CoStS, With the FleXibility oF PlUG-and-Play teChnoloGy

tesys® Model u is a motor starter-controller complying with BseN 60947-6-2. It combines the functionality of disconnection/isolation, short circuit protection, power switching (contactor) and electronic motor protection, in a compact 45mm wide device right up to 32a. You also get protection against phase failure and imbalance, with manual reset.

even a reversing starter is only 45mm wide with tesys® Model u!

TeSys® Model U’s plug-and-play technology allows assembly and wiring of the panel before selection of motor protection parameters and control voltage. Changing the starter’s capability can be achieved in seconds, thanks to plug-in function modules. From faster panel design and reduced build and wiring time, right through to system fault diagnostics and easy upgrading as the application evolves, TeSys® Model U’s emphasis is on reduced cost of ownership throughout the product life cycle.

tEsys modEl u staNdard Ideal for simple motor starter applications in one time and cost saving assembly!

faster design - one integrated device in circuit/ layout drawings

Installed cost saving - massive reduction in build time

space saving - up to 32A only 45mm wide including reversering starter

More savings for dc -Same price/ same size as ac

easy overload change - Plug-in protection

Helps cash flow - select overload relay afterbuild complete

easily upgraded - plug & play added functions

easier maintenance - differentiates between O/L and S/C trip

reduced downtime - total coordination, no need to replace components after short-circuit

sElECtioN GuidE1. Simply select your TeSys model

U base unit - this provides the switching function of an isolator and contactor, and breaking capacity of 50kA.

2. Then select your Standard LUC A protection module from the table - this provides basic overload and short-circuit protection and is dependent upon control voltage.

Motor rating setting range Powerbase KW 400/415V a rating 0.09 0.15-0.6 12 & 32A LuCaX6**0.25 0.35-1.4 12 & 32A LuCa1X**1.5 1.25-5 12 & 32A LuCa05**5.5 3-12 12 & 32A LuCa12**7.5 4.5-18 12 & 32 LuCa18**15 8-32 12 & 32 LuCa32**

Description Part Number

Power bases (DOL, non reversing)

493-8858 12A 24-240Vac/dc, screw terminals LUB12 $84.00

493-8864 32A 24-240Vac/dc, screw terminals LUB32 $122.00

493-9160 12A 24-240Vac/dc, plug in terminals LUB120 $72.00

493-9176 32A 24-240Vac/dc, plug in terminals LUB320 $107.00

LuC a basic control units

272-505 Std mod. 0.15A to 0.6A 48…72V ac LUCAX6ES $85.00

272-498 Std mod. 0.15A to 0.6A 110…240V ac LUCAX6FU $83.00

272-527 Std mod. 0.15A to 0.6A 24V dc LUCAX6BL $83.00

272-511 Std mod. 0.15A to 0.6A 24V ac LUCAX6B $85.00

272-628 Std mod. 0.35A to 1.4A 48…72V ac LUCA1XES $89.00

272-612 Std mod. 0.35A to 1.4A 110…240V ac LUCA1XFU $87.00

272-482 Std mod. 0.35A to 1.4A 24V dc LUCA1XBL $87.00

272-476 Std mod. 0.35A to 1.4A 24V ac LUCA1XB $89.00

272-460 Std mod. 1.25A to 5A 48…72V ac LUCA05ES $91.00

272-454 Std mod. 1.25A to 5A 110…240V ac LUCA05FU $89.00

272-606 Std mod. 1.25A to 5A 24V dc LUCA05BL $89.00

272-599 Std mod. 1.25A to 5A 24V ac LUCA05B $91.00

272-410 Std mod. 3A to 12A 48…72V ac LUCA12ES $102.00

272-404 Std mod. 3A to 12A 110…240V ac LUCA12FU $99.00

272-432 Std mod. 3A to 12A 24V dc LUCA12BL $99.00

272-426 Std mod. 3A to 12A 24V ac LUCA12B $102.00

272-549 Std mod. 4.5A to 18A 48…72V ac LUCA18ES $110.00

272-533 Std mod. 4.5A to 18A 110…240V ac LUCA18FU $107.00

272-555 Std mod. 4.5A to 18A 24V ac LUCA18B $110.00

272-397 Std mod. 4.5A to 18A 24V dc LUCA18BL $107.00

272-561 Std mod. 8A to 32A 110…240V ac LUCA32FU $160.00

272-448 Std mod. 8A to 32A 48…72V ac LUCA32ES $164.00

272-583 Std mod. 8A to 32A 24V dc LUCA32BL $160.00

272-577 Std mod. 8A to 32A 24V ac LUCA32B $164.00

or www.rssingapore.com 1�

ha

rtinG

(65) 6865 3433 (65) 6865 3444

hardened ethernet ConneCtivity For indUStrial aPPliCationS

What is industrial Ethernet?Ethernet is a means of transmitting a signal between two or more devices over a shared medium and has been in use for many years in offices throughout the world. Industrial Ethernet uses this technology to communicate between Industrial control and automation devices. Although the technology is basically the same Industrial Networks have additional requirements due to the harsher environments in which they are installed.

Why HartiNG? HARTING’s Automation IT concept uses open standards such as Rapid Spanning Tree Protocol IEEE 802.1w (RSTP). This means that HARTING’s industrial hardened products are compatible with office-based Ethernet devices from industry-standard suppliers such as Cisco, so that Industrial equipment and commercial equipment can co-exist on the same network. Furthermore the users’ existing IT department can be used as a resource during planning and implementation as well as operationally.

Ethernet devices and inter-connections need to be hardened when used in a manufacturing environment to provide protection from dust and water ingress, and resilience to EMC and vibration. HARTING has used their many years of experience as Europe’s leading manufacturer of heavy-duty interconnection devices to develop Ethernet devices and inter-connection products for the harshest industrial applications.

the HartiNG solutionHARTING’s Industrial Ethernet portfolio includes a broad range of unmanaged, configurable and managed switches including variants for 19” rack mounting, DIN rail mounting in control panels and IP65/67 switches for installation directly into the harshest of industrial environments.

The range includes interface products for both copper and fibre communication between industrial automation and control equipment, sensors and monitoring systems, communications within machines and control systems, and links between the industrial and office computing environments.

Ethernet Networking standards covered by the HARTING range include standard Ethernet, Ethernet/IP™ and PROFINET® networks.

HARTING produces the most comprehensive array of interconnection devices including connectors for copper and fibre networks, cable, cable assemblies and patch leads to provide for a complete network installation.

623-5820 IP30 8 Port ethernet switch $358.00

623-6182 IP65 5 Port ethernet switch $672.00

623-6160 IP67 Cat5 metal ethernet outlet $233.00

623-5814 2+3 Port IP65 ethernet switch $450.00

465-9735 IP67 Han® 3A based RJ45 data connectors $35.70

For more information see rS Catalogue, �0

(65) 6865 3433 (65) 6865 3444h

iGh

qUa

lity

to

olS

try rs Online today

rS branded toolSrs branded tools – enjoy the widest range of high quality tools that have all been thoroughly tested by rs to meet the highest standards at an affordable price.

243-513 Electronic screwdriver set $15.90

243-585 Antistatic screwdriver set $29.90

243-692 Torx® screwdriver set $19.90

2021

PrECisioN driVEr sEtsPrecision screwdrivers ideally suited to the electronics industry

High grade chrome-vanadium steel

Rotating cap allows for easy and precise adjustments

Tri-lobe handle provides positive, comfortable grip

••••

1984 & 1989

161-209 Standard diagonal bevel cutter $53.70

160-997 ESD diagonal flush cutter $66.00

161-035 Standard 130mm flat nose plier $35.40

161-079 ESD 120mm snipe nose plier $49.30

NEW ElECtroNiC CuttErs & PliErsComprehensive range of ESD and standard DIN cutters and pliers

Manufactured from high grade steel with precise box joint construction

Comfortable soft grip handles

•••

542-3492 Two pack ball driver set $56.00

2036

tWo PaCk HExaGoN ball driVEr sEt

Two pack comprising a 9 piece hexagon ball driver set and a 7 piece fold up set

Fully hardened keys covering sizes from 1.5 to 10mm

•

•

451-8971 Electronic multi-test screwdriver $4.90

ElECtroNiC multi-tEst sCrEWdriVEr

Suitable for direct contact use on 70 – 250Vac/dc

Non contact voltage test 70 – 10,000Vac

Continuity and polarity test function plus microwave leakage and non contact current detection

Manufactured to VDE0680 Part 6 and BS2559 Part 3

•

••

•

2023

161-221 11 piece VDE toolkit $293.00

liVE WorkiNG tool kit

11 piece VDE approved kit of live working pliers, cutters, parallel and Phillips screwdrivers

High grade steel construction with comfort grip handles

Supplied in protective zipped wallet

•

•

•

2049

433-4537 LED pen torch $16.90

2260

lEd PEN torCHMomentary and maintained action

Extended 50,000 hours LED life

Rugged hard anodised body

•••

or www.rssingapore.com

(65) 6865 3433 (65) 6865 3444

�1

hiG

h q

Uality to

olS

rS branded toolS

2030

459-3944 6 piece engineers set $21.90

459-3966 8 piece electricians/instrument set $27.90

459-3988 10 piece general maintenance set $31.90

459-3972 18 piece mechanical set $49.90

2014

663-617 Equipment wire stripper $17.00

439-3025 Zinc plate finish $21.30

439-3019 Chrome finish $33.20

uNiVErsal ENClosurE kEys

Multi-purpose enclosure key wrenches designed for use in maintenance and service applications

Available with either bright chrome or zinc plate finish

6.5mm (1⁄4”) and 8.1mm (5⁄16”) square sockets, 1⁄4” AF hex socket, 9.8mm triangular socket and 9mm winged key drive

Supplied with a 6.5mm (1⁄4”) square to hex drive adaptor plus a 7mm flat blade/No.2 Phillips double ended screwdriver bit

•

•

•

•

2040

623-6390 39 piece socket and bit set $39.90

623-6441 46 piece socket and bit set $42.90

NEW ¼” driVE soCkEt & bit sEtsHigh quality chrome vanadium steel socket and bit sets

Supplied in protective plastic or steel storage cases

••

2065

ErGoNomiC driVEr sEtsErgonomic driver sets containing the most popular sizes, designed specifically to suit the requirements of a range of user types and application areas

Soft feel handles give optimal balance between applied torque and comfort in use

Supplied in protective case or wallet

•

••

480-6767 6-drawer tool chest $562.00

480-6789 140 piece square drive hex socket and bit insert $540.00

480-6824 4 piece flare nut spanner insert $29.90

480-6818 8 piece precision screwdriver insert $29.90

480-6802 4 piece circlip plier insert $79.00

480-6795 8 piece ratcheting spanners insert $139.00

480-6880 61 piece square drive socket insert $192.00

480-6874 6 piece hacksaw, hammer and circlip pliers insert $169.00

480-6852 7 piece pliers insert $129.00

480-6846 16 piece screwdrivers insert $79.00

480-6830 38 piece square drive accessories and hexagon key insert $251.00

2043 & 2044

6 draWEr tool CHEstHigh quality, steel construction tool chest in key lockable, 6 drawer design

Safe storage for all your valuable tools

Red, powder coated finish

Versatile tool tray inserts allow the user to build the ideal tool set for the application

•

•••

CablE striPPErCuts and strips insulation from wire in a single operation

Suitable for use with PVC, silicon rubber and many other wire types

Stripping range from 0.8 to 8.0mm²

Spring lever mechanism to reduce operator fatigue

•

•

••

Kit contents

39 piece 46 piece

Metric socket (mm) 4-14 (13 inc.) 6-13 (6 inc.)

Imp. Sockets - 3/16-7/16 (6 inc.)

Hex bits (mm) 3-6 (4 inc.) 1.5-6 (8 inc.)

Slot bits (mm) 4-7 (3 inc.) 3-9 (8 inc.)

Pozidrive® bits Pz0-2 (3 inc.) Pz0-2 (3 inc.)

Philips® bits Ph0-2 (3 inc.) Ph1-3 (3 inc.)

Tamperproof Torx® bits Tx8-40 (8 inc.) Tx10-40 (7 inc.)

For more information see rS Catalogue, ��

lith

iUM

ion

teC

hn

olo

Gy

lithiUM ion teChnoloGy

finding what you need has never been easier

“More from less” is a simple analogy for one of the more important benefits of lithium ion batteries, more energy is available in a lower weight package, see figure below.

Typically, lithium ion batteries will provide around twice the energy of a nickel metal hydride battery at the same power for a given weight of a battery and in excess of four times the amount available from a nickel cadmium battery of a similar weight. This allows the equipment designer to either reduce the weight of the portable equipment or extend the operating life. Other significant advantages include an almost 100% charge efficiency, i.e. no or little energy wasted during charge, this has an environmental impact when one considers the number of portable appliances being recharged and a cost benefit to industry because it is not paying for energy that it gets no benefit from. In addition, lithium ion cells have a very low self discharge, this means that batteries can be left on the shelf longer before being used.Lithium ion batteries are now being used in every type of portable equipment, including military, medical, security, control and instrumentation and general electronics.

tHe POrtaBLe WaY fOrWarDLithium ion batteries first became commercially available around 1990 and enix energies were one of the first battery companies in the uK to be able to offer bespoke battery designs. after an initial slow uptake by designers and OeM’s due to limited supply both in terms of manufacturers and battery sizes the recent growth rate has accelerated considerably. this increase has been driven by the reduction in price, increase in availability and the growth in portable electronic systems, especially the need for “more from less”.

530-6325 3.7V 1840mAh $72.00

litHium ioN rECHarGEablE battEriEs

The battery of the future for portable devices, featuring high energy density, no memory effects and a long operational life

Maintenance free

Built-in circuit protection

Complies with UN Transport Regulations

Suitable for air transport

•

••••

online at www.rssingapore.com ER615-2450 3.75V 6800mAh $163.00

VEry HiGH CaPaCity litHium ioN battEriEs

Up to 5A loads

Lightweight

Long cycle life

Complies with UN Transport Regulations

Suitable for air transport

Built-in protection against overcharge and discharge

Aluminium alloy to BS1474 6063, T6

••••••

•

online at www.rssingapore.com ER538-9881 16.8V 2A $129.00

online at www.rssingapore.com ER

litHium ioN CHarGErs

Compact chargers employing a three stage charge control system with current detection as charge termination, and an input voltage range of 90 to 230Vac for extra versatility

LED status indication

LED status indication

En 60601 medical approval

•

•••

AS

IA 0

025

– 06

/08

All products in this issue are sold subject to the Terms & Conditions of sale set out in the current RS 2008/9 catalogue. Prices exclude GST, which will be charged at prevailing rate.

Gre

at

Ch

oiC

eSView the 4th and 5th Column Pricing online

Great ChoiCeS

376-0216 GFG-8255A $944.00

NEW CombiNEd 150mHz FrEquENCy CouNtErs & FuNCtioN GENErators WitH am/Fm modulatioN

0.5Hz to 5MHz function generator

6 digit LED read out of generator frequency

Sine, Square, Triangle and Ramp Wave forms

TTL and variable CMOS outputs

Duty cycle control

Variable dc offset

Built in 6 digit frequency counter with 150MHz range (external input)

NT/EXT AM/FM modulation

Refer to catalogue/website for technical specification

•••••••••

2533

113-345 DM61 Pocket multimeter $104.00

NEW idm61 PoCkEt multimEtEr Compact design with soft rubber side grips

2000 counts LCD display

6 functions/ 14 ranges

1000V ac/dc measurement range

Integral non-contact AC voltage detector with visual and audible indication (xxVac to xxVac)

Resistance/continuity and diode test

Full autoranging with manual override

Display hold

Auto–power off

Conforms to EN61010-1 (safety rating) CAT III 600V, CAT II 1000V

Supplied with 2 x AA alkaline batteries, users instructions and test leads

Refer to catalogue/website for technical specification

•••••

•••••

•

•

2538

219-642 Component tester $230.00

ComPoNENt tEstErA low cost, battery powered component tester with a 3½ digit LCD display and a maximum reading of 1999 making it ideal for use in field service and production environments

Tests: batteries, diodes, LEDs, transistors, SCRs

Measures resistance and capacitance

Low battery indication and overload protection

Dimensions 175 x 84 x 31mm

Supplied with 9V battery, test leads, instruction manual and holsters

Refer to catalogue/website for technical specification

•

•••••

•

2471

442-0357 ISO-TECH Lux 1335 $294.00

iso-tECH lux 1335Measurement range of 0 to 400000 lux or 0 to 40000 fc.

5 ranges/times covered

Data hold

Max/min function

Relative readings

Auto power off

4000 count reading with instant bar graph indication

Large, easy to read LCD display

Supplied with sturdy carry case and full instructions

Refer to catalogue/website for technical specification

••••••••••

2477