623CT Tech Spec 01-2015 Issue with CAT C9 T3 Engineaggtech-crusher-imports.com/wp-content/uploads/2017/03/623CT-Tech...• Engine Shutdowns: - Low Oil Pressure - High ... 1800 Rpm

CRUSHERS . SCREENERS . BULK HANDLING

Technical Specification

623CT with CAT C9-T3 Engine – 01/2015 Issue

623CT MOBILE IMPACT CRUSHER

with CAT C9-T3 Engine

TECHNICAL SPECIFICATION Subject to change without notice.

Copyright © 2015

Tesab Engineering Ltd.

Page 2

Unit 9 * Gortrush Industrial Estate * Omagh * United Kingdom

Tel: +44 (0) 28 82252781 * www.tesab.com




DESCRIPTION:

Self Contained Mobile Impact Crusher with the following features:

• 275Hp CAT C9 Tier III Diesel Engine.

• Heavy Duty Horizontal Shaft Rotor.

• 600mm x 350mm (23” x 14”) Crusher Feed Opening.

• Hydraulically Adjustable Bar Carrier.

• Hydraulically Opening Crusher Body.

• IBF 314 Clutch (Optional Transfluid 19 KPTO Hydraulic Clutch).

• 800mm (32”) Wide Hydraulically Folding Feed Conveyor Belt.

• 650mm (26”) Wide Hydraulically Folding Product Conveyor Belt.

• Feed and Product Conveyor Variable Speed Controls.

• 400mm Wide Crawler Tracks.

• Large Feed Hopper.

• Dust Suppression on Crusher Feed-in and feed-out.

• Fast on Site setup Time – 15 Minutes.

DIMENSIONS AND WEIGHT:

• Length – Transport: - 15m (49’ 2”)

• Length – Working: - 16.13m (52’ 11”)

• Width – Transport: - 2.9m (9’ 6”)

• Width – Working: - 2.9m (9’ 6”)

• Height – Transport: - 3.4m (11’ 1”)

• Weight – Estimated: - 27,000 Kgs (59,525 Lbs)

NOTE: The weights and dimensions stated here are given for a standard machine only. Optional extras fitted to the machine and/or transportation laws in force in various countries, may alter the transportation weight and dimensions of the machine.

Copyright © 2015


Page 3


Tel: +44 (0) 28 82252781 * www.tesab.com




HOPPER:

• Hopper Length (with shroud): - 4310mm (14’ 1”)

• Hopper Width (with shroud): - 1830mm (6’)

• Hopper Capacity: - 6m3 (7.85yd

3)

• Shroud: - YES

• Feed in Height: - 3.8m (12’ 5”)

FEED CONVEYOR:

• Belt Width: - 800mm (32”)

• Belt Spec: - Plain EP500/3 5+1.5

• Drive Drum Dia: - 220mm (8”)

• Tail Drum Dia: - 220mm (8”)

• Gearbox: - Brevini

• Gearbox Ratio: - 1:18

• Gearbox Torque: - 3500 Nm cont

• Motor: - 130cc

• Max Flow Rate: - 119 Lpm (31.44 US Gpm)

• Variable Speed Control: - YES

• Belt Speed: - Factory set @ 27 M/min

CRUSHER:

• Feed Opening: - 600mm x 350mm (23” x 14”)

• Maximum Crusher Speed: - 650 Rpm

• Minimum Crusher Setting: - 10mm (0.4”)

• Maximum Crusher Setting: - 60mm (2.4”)

• Maximum Feed Size: - 200mm (8”)

• Crusher Drive Required: - Direct Drive SPC V-Belts 6off

• Rotor Size: - 600mm (22.6”) wide x 1068mm (42”) Dia.

• Pulley Size: - SPC 700, 6 Groove

• Hammers: - 3 off

• Bar Carrier: - 4 Bar

• Wear Plate Thickness: - 30mm

• Hydraulic Bar Carrier Adjustment: - YES

• Hydraulic Crusher Body Opening: - YES

• Hydraulic Crusher Adjustment: - YES (Bar Carrier)

Copyright © 2015


Page 4


Tel: +44 (0) 28 82252781 * www.tesab.com




MAIN PRODUCT CONVEYOR:

• Discharge Height: - 3690mm (12’ 1”)

• Belt Width: - 650mm (26”)

• Belt Spec: - Plain EP500/3 5+1.5

• Drive Drum Dia: - 220mm (8”)

• Tail Drum Dia: - 220mm (8”)

• Motor: - 625cc

• Max Flow Rate: - 119Lpm (31.44 US Gpm)

• Variable Speed Control: - YES

• Belt Speed : - Factory set @ 105 M/min

ELECTRICS

• Chassis Cabling: - SWA Cable

• Emergency Stops: - 5 off, 1 @ Control Console RH Side

2 @ Rear Chassis LH & RH Sides

2 @ Front Chassis LH & RH Sides

• Start Siren: - YES – 10 Second Delay

• Warning Beacon: - YES

• Tracking Siren: - YES – 10 Second Delay

• Tracking Beacon: - YES

• Engine Shutdowns: - Low Oil Pressure

- High Water Temp

- Air Filter Blockage

- Fuel Contamination

• Crusher Shutdowns: - Clutch Oil Temperature

• Radio Control Tracks: - OPTIONAL (Hetronic)

• Pendant Track control: - YES

POWER UNIT AND HYDRAULICS:

• Engine: - CAT C9 TA (TIER III)

• Engine Power: - 205Kw - 275 HP

• Engine Speed: - 1800 Rpm

• Main Flywheel Pump: - DBH 5051 2off

• Clutch: - IBF 314 ( Optional Transfluid 19 KPTO)

• Crusher Drive Pulley: - SPC 250 x 6

• Diesel Tank Capacity: - 500 Ltrs (110 US Gal)

• Hydraulic Tank Capacity: - 700 Ltrs (154 US Gal)

• Hydraulic Oil Cooler: - YES

• Hydraulic Clutch Oil Cooler: - YES

Copyright © 2015


Page 5


Tel: +44 (0) 28 82252781 * www.tesab.com




FUEL PERFORMANCE:

The fuel consumption rates above are estimated using the BSFC values quoted on the engine performance charts for each

model - please note that this value is only accurate at the 100% load figure quoted on this chart.

Copyright © 2015


Page 6


Tel: +44 (0) 28 82252781 * www.tesab.com




TRACKS:

• Gearbox: - RRTD3600

• Ratio: - 161:1

• Width: - 400mm (15.8”)

• Length (overall): - 3960mm (13’)

• Height: - 740mm (29”)

• Motor: - MSI163cc

• Speed max: - 1.3 Kph (0.81 Mph)

• Flow Rate: - 120 Lpm (31.7 US Gpm)

• Gradeability: - 40.9˚

• Max slope side to side: - 10˚

• Attachment to Chassis: - Bolt On

SAFETY FEATURES:

• Engine Safety Shutdown Systems

• Full Safety Guarding for Nip Points

• Key Switch Operated Tracking System

• 10 Second Start and Tracking Delays

• Easy Access Lubrication Points

• CE Compliance

OPTIONS: .

• 19 KPTO Clutch

• Metal Detector

• Picking Platform

• Autolub System

• Hydraulic Tipping Grid

• Remote Control Tipping Grid

• Manual Tipping Grid

• Closed Circuit Conveyor

• Product Conveyor Screenbox

• Product Conveyor Magnet

• Scales

• Radio Remote Control for Tracks

• Conveyor Dust Covers

• Working Lights

• 68 Type Hydraulic Oil

• E-Stop Pull Wires

NOTE: Fitting optional extras to this machine may increase the manufacturing lead time.

Copyright © 2015


Page 7


Tel: +44 (0) 28 82252781 * www.tesab.com




WORKING DIMENIONS:

Copyright © 2015


Page 8


Tel: +44 (0) 28 82252781 * www.tesab.com




SIEVE ANALYSIS:

Copyright © 2015


Page 9


Tel: +44 (0) 28 82252781 * www.tesab.com




NOISE LEVELS:

Documents

623CT Tech Spec 01-2015 Issue with CAT C9 T3 Engineaggtech-crusher-imports.com/wp-content/uploads/2017/03/623CT-Tech...• Engine Shutdowns: - Low Oil Pressure - High ... 1800 Rpm