620 Series Medium Bi-Pin Fluorescent Quickwire Lampholderstriboro-usa.com/pdf/SB-Catalog-2010.pdf · A.L.P. Lighting Components, Inc. Tel: (877) 257-5841 † Fax: (800) 438-2500 630

A.L.P. Lighting Components, Inc.

Tel: (877) 257-5841 • Fax: (800) 438-2500www.alplighting.com

620 Series Medium Bi-Pin Fluorescent Quickwire Lampholders for T8 and T12 Lamps

UL File. No. E36983CSA File No. LR11209Rated 660W - 600V

Thin quickwire fluorescent lampholders are molded in white thermosetting urea, with black phenolic available to order. Quickwire pressure terminals of high-strength brass alloy accept #18 AWG solid, topcoat or twisted and tinned stranded leads. Silver-plated contacts are available by special order. Consult factory for minimums required. Lampholders are available with various features for a wide range of mounting methods. Each contact features a double-contact connection, permitting a jumper connection for rapid start circuits. Screws and nuts can be supplied separately or can be inserted to order. See hardware chart below for ordering options. Consult the mounting chart and dimensional drawings for information on variations in mounting methods. Lampholders and socket combinations available.

Features quickwire terminals• Permits jumper connection for rapid-start circuits• Circuit interrupting type featuring disconnect• Three different mounting configurations available•

Catalog Number Description

620A Screw and nut, and/or 18 gauge mounting grooves

Hardware Ordering Options

Description Ordering Code

Less nuts, less screws LNLS

Nuts inserted, screws in bulk NASB

620 Series slotted screws are 6-32 x 5/8” length, part #18-59134-625.620 and 630 Series PAL nuts are 6-32 thread gauge, part #019-12632.Phillips head screws are available by special order.Screws and nuts are not included, unless requested.Lampholders are suitable for use in fixtures designated for damp or wet locations.Add hardware code as suffix to catalog number i.e., 620A-NASB.

Part Number Catalog Number/Description

F0960000A005-M 620A NASB

F0960000A006-M 620A NASB 6-32 x 1/2”

F0960000A007-M 620A LNLS

1

0.0580.053 11/32

620A

2- 3/8

11/32

1/16

5/8

13/16

5/321- 1/8

1- 15/32

620A

Wcassem

Text Box

Wcassem

Text Box




UL File No. E36983CSA File No. LR11209Rated 660W - 600V

Thin quickwire fluorescent lampholders are molded in white thermosetting urea, with black phenolic available to order. Quickwire pressure terminals of high-strength brass alloy accept #18 AWG solid, topcoat or twisted and tinned stranded leads. Silver-plated contacts are available by special order. Consult factory for minimums required. Lampholders are available with various features for a wide range of mounting methods. Each contact features a double-contact connect, permitting a jumper connection for rapid start circuits. Screws and nuts can be supplied separately or can be inserted to order. See hardware chart on next page for ordering options. Consult the mounting chart and dimensional drawings for information on variations in mounting methods. Lampholder and socket combinations available.

Permits jumper connection for rapid-start circuits• Circuit interrupting type featuring disconnect• Features quickfire terminals• 13 different mounting configurations available•


F1020000A001-M 630A NASB (018-59140-375 SCR)

F1020000A002-M 630A

F1020000A003-M 630A NASB (018-59134-375 SCR)

F1020000A006-M 630A NALS

F1020001A001-M 630A-1

F1020001A008-M 630A-1 NALS

F1020003A003-M 630A-3 LNLS

F1020003A004-M 630A-3 NALS

F1020005A002-M 630A-5 NALS

F1020051A002-M 630A-51 LNLS with 11” #18 AWM 1015 topcoat leads strip 7/16”

F1020051A018-M 630A-51 NASB with 9” #18 AWM 1015 strip 1/2”

F1020052A005-M 630A-52 with 9” white #18 AWM 1015 strip 1/2”


630A Screw and nut

630A-1 18 gauge panel mount

630A-3 20 gauge panel slot

630A-5 Full base

630A-51 Disconnect lead and screw nut

630A-52 18 gauge panel mount disconnect lead

1

1- 3/16

5/16

630A

11/32

2- 1/16

23/32

1

1+.005-.005

0.0430.047

630A-1

11/32

1- 1/4

1- 3/4

2- 1/16

23/32

630A 630A-1

Wcassem

Text Box

Wcassem

Text Box







Nuts in bulk, screws in bulk NBSB

Nuts inserted, less screws NALS


Nuts and screws inserted NASA

620 Series slotted screws are 6-32 x 5/8” length, part #018-59134-625.630 Series slotted screws are 6-32 x 3/8” length, part #018-59134-375.620 and 630 Series pal nuts are 6-32 thread gauge, part #019-12632.Phillips head screws are available by special order.Screws and nuts are not included, unless requested.

1630A

1- 3/16

5/16

1

1

-.005+.005

0.0470.043

1- 3/4

1- 1/4

630A-3

630A-52

630A-51

1+.005-.005

0.0430.047

630A-1

1- 1/4

1- 3/4

630A-51

Wcassem

Text Box

Wcassem

Text Box



631 Series Medium Bi-Pin Quickwire Fluorescent Low Profi le Lampholders for T8 and T12 Lamps

UL File. No. E36983CSA File No. LR11209Rated 660W - 600V

These thin quickwire lampholders are molded in white thermosetting urea, and also are available in black to order. Quickwire pressure terminals of high-strength brass alloy permit easy, positive wire connection. Terminals will accept #18 AWG solid, topcoat or twisted and tinned stranded leads. Silver-plated contacts are available by special order. Consult factory for minimums required. Circuit interrupting disconnect available on the 631 Series. Variations available for screw and nut mounting or slide-on mounting grooves.

Quickwire terminals for easy wire connection• Screw and nut or panel mounting available• Terminals accept a variety of leads•

Table of Mounting Methods

631A Screw and nut

631A-1 18 gauge panel mount








631 Series slotted screws are 6-32 x 3/8” length, part #018-59134-375.PAL nuts are part #019-12632.Add hardware code as suffix to catalog number, i.e., 631A-NASB.Phillips head screws are available by special order.Screws and nuts are not included, unless requested.Lampholders are suitable for use in fixtures designated for damp or wet locations.


F104A1LNLS01-M 631A-1 LNLS

F1040000A002-M 631A NASB

F1040000A005-M 631A NASB (018-59140-375 SCR)

F1040000A006-M 631A LNLS

0.0530.058

11/32

1- 13/16

5/16

47/64

63/64

15/16

1- 5/32

631A-1

63/64

15/16

1- 5/32

11/32

1- 13/16

47/64

5/16

631A

631A-1

Wcassem

Text Box

Wcassem

Text Box



Series 635, 636 Medium Bi-Pin Quickwire Fluorescent Butt-On LampholdersFor T8 and T12 Lamps

UL File No. E36983CSA File No. LR11209

These butt-on lampholders are molded in black phenolic or white thermosetting urea, and are supplied with 9” #18 AWM 1015 105°C wire. Other types and lengths are available. Lampholders are available with tempered steel snap-in springs or 4-36 tapped holes, or 0.140” diameter slip holes. Mounting screws sold separately, please specify. Leads may be brought out straight or from rear for flush mounting.

Either snap-in springs, clearance hole, or tapped hole mountings available• Black phenolic or white thermosetting urea composition• Circuit interrupting type featuring disconnect•

Catalog Number

Rated 660W - 600V

Catalog Number

Rated 660W - 250V

Color Mounting Methods

635A 635A-101 White Snap spring, screws not necessary

635A-51 635A-151 White Snap spring with disconnect, screws not necessary

636A 635A-101 White 4-36 tapped holes, screws optional


F106635A0002-M 635A with 9” #18 AWM 1015 topcoat leads strip 1/2”



F106635A0013-M 635A 6” #18 AWM 1015 strip 9/16”

F106635A0026-M 635A with 9” #18 AWM 1015 strip 1/2”

F106635A5103-M 635A-51 with 9” #18 AWM 1015 black and white, leads strip 3/8” NOTE: Disconnect lead to be white “A” lead black and “B” lead white

F106636A0008-M 636A with 9” #18 AWM 1015 leads strip 1/2”

F106636A0018-M 636A with (1) 10” white (‘A’ lead) #18 AWM 1015 topcoat lead strip 7/16” & (1) 6- 1/2” white (‘B’ lead) #18 AWM 1015 lead strip 3/16”, less screws

F106636A0019-M 636A with (1) 5-1/2” white (‘A” lead) #18 AWM 1015 topcoat lead strip 7/16” & (1) 14- 3/4” white (‘B’ lead) #18 AWM 1015 lead strip 3/16”, less screws

636

4-36

5/32

31/32suggested cutout for 635Snap Spring Series

dimensional data for 635 & 636 Series

7/16

1- 7/32

35/64

31/321- 1/4

“Disconnect” Lead Blueunless otherwise specified

“B” LeadBlack unless otherwise specified

“A” LeadWhite unless otherwise specified

635

635A

Wcassem

Text Box

Wcassem

Text Box



645 Series Medium Bi-Pin Fluorescent Butt-On LampholdersFor T8 and T12 Lamps


These fluorescent butt-on lampholders, molded of white thermosetting urea, come with high-strength brass alloy quickwire pressure terminals that accept #18 AWG solid, topcoat or twisted and tinned stranded leads. Silver-plated contacts are available by special order. Consult factory for minimums required. Lampholder features release slots at each connection. Multiple terminal slots permit double contact connection at each contact, allowing a jumper connection for rapid start circuits. Available with center hole for butt-on mounting, with side slots, mounting grooves, or mounting brackets. Consult chart for variations.

Designed for fast wiring• High-strength alloy quickwire terminals• Options allow many mounting configurations•

Catalog Number Mounting Variations

645A-1 With 0.150 diameter hole in center

645A-2 With #8-32 tapped hole in center

645A-8 Slide-on mounting tabs in body made to engage formed lancings in fixture plate

645A-27 With 0.038 mounting grooves


F1100001A005-M 645A-1 externally shunted (side draw)

F1100001A002-M 645-1

F1100002A002-M 645A-2 (side draw with #8-32 tap)

F1100008A007-M 645A-8

F1100027A002-M 645A-27

F1100027A003-M 645A-27 externally shunted

1- 3/8

9/16

13/32

5/32

1- 7/16

11/32

645A-1

1- 3/8

9/16

1/4

9/32

1- 17/32

13/32

9/321/8

1/2

1- 15/32

1/811/32

645A-8

645A-21- 3/8

9/16

13/32

#8/32

0.0430.038

1- 3/8

3/16

1- 23/641- 1/2

13/32

9/16

645A-27

645A-2

Wcassem

Text Box

Wcassem

Text Box



649 Series Medium Bi-Pin Fluorescent Lampholders - Low Profi leFor T8 Lamps


These thin quickwire lampholders are molded in white thermosetting urea. Available in black to order. Quickwire pressure terminals of high-strength brass alloy permit easy, positive wire connection. These terminals will accept #18 AWG solid topcoat or twisted and tinned stranded leads. Silver-plated contacts are available by special order. Consult factory for minimums required. Variations available for screw and nut mounting or slide-on mounting grooves.

Quickwire terminals for easy wire connection• Screw and nut or panel mounting available• Terminals accept a variety of leads•

Table of Mounting Methods

649A Screw and nut

649A-1 Screw and nut



Less Nuts, less screws LNLS






F1140000A001-M 649A NASB

F1140000A003-M 649 NBSB

F1140000A004-M 649A

F1140000A012-M 649A NASB

F11400000001-M 649A NALS

649 Series slotted screws are 6-32 x 3/8” length, part #018-59134-375. PAL nuts are part #019-12632. Add hardware code as suffix to catalog number i.e., 631A-NASB.Phillips head screws are available by special order.Screws and nuts are not included, unless requested.Lampholders are suitable for use in fixtures designated for damp or wet locations.

649A

63/64 11/32

5/16

23/32

21/32

1- 17/32

63/64

37/64

1- 17/32

11/32

23/32

25/64

649A-1

649A

Wcassem

Text Box

Wcassem

Text Box



650 Series Medium Bi-Pin Fluorescent Starter Base Holder Sockets


These starter base holder sockets, molded in black phenolic or white urea, are supplied with high-strength brass alloy quickwire terminals for easy wire insertion. Quickwire termination will accept #18 solid or topcoat wire. Used for independent mounting or in combination with our catalog #630-A series. This combination will provide quickwire features to both a starter socket and a lampholder.

Starter sockets with wires attached can be supplied with #18 AWG stranded, topcoat, or prebond leads. Consult the chart and dimensional drawings for information on the variation in mounting methods available. The suffix number must be added to the catalog number when ordering. Order mounting screws separately.

Table of Mounting Variations

-3 Flat metal bracket - two holes tapped 6/32”

-9 U-shaped metal spring for snap-in attachment. 1.350” height

-11 Shallow U-shaped bracket. Height 37/64” two holes tapped 6/32”

-12 Two 9/64” diameter clearance holes

-26 -14 bracket mounted on 90° angle

Mounting Variations


F11600030016-M 650-3 No leads

F11600090018-M 650A-9 No leads - white

F11600110001-M 650-11 red #18 AWM 1015 topcoat (1) 7” (1) 26” lead strip 3/8”

F11600110004-M 650-11

F11600120010-M 650-12 Using PBT material for the fiber

F11600260028-M 650-26 Note: use -14 bracket mounted at 90° angle

F11600260030-M 650-26 Note: use -14 bracket mounted at 90° angle

F1020001A009-M 630A-1 / 650 combo (1) 5-1/2” #18 gauge 1015 solid black lead push-in wire lead to be inserted into right side wire port of 650

F1020001A011-M 630A-1 / 650 combo inserted, joined with black #18 AWM 1015 solid lead between the devices, (1) with 18” and (1) 6”

7/16

7/16

32/32

7/8

1- 1/4

650-1

650-11

630A with 650-6 combo

ROSCA 6/32

7/16

1- 7/1631/32

7/8

1- 1/4

650-31- 1/4

7/8

7/16

1- 11/32

650-9

.150 D.

7/8

1- 7/16

31/321- 1/4

650-26

ROSCA 6/32

1- 13/16

37/64

31/32

1- 1/41- 7/16

650-11

Wcassem

Text Box

Wcassem

Text Box



659 Lead Series Miniature Bi-Pin Fluorescent LampholdersFor T5 Lamps


These lampholders, molded of black phenolic or white urea, are ideal for mirror case lighting, showcase lighting, or any other confined space applications. High-strength brass alloy contacts, designed for firm lamp grip, to protect against vibration. Supplied with 6” #18 AWM 1015 105°C or #18 topcoat wire leads, with other types and lengths of wire available to specific order. Lampholders are available with various mounting brackets for front or back mounting, or as butt-on mounting, without a bracket. Catalog #659-black, catalog #659A-white. Add the suffix number from the table listing to the catalog number when ordering.

659 Series Front Mount Brackets

Cat. No. A B C D

1 17/32” 19/32” 11/32” 6-32


F1200001A008-M 659A-1 tapped 6-32 with 6” #18 AWM 1015 strip 5/8”

F1200001A033-M 659A-1 tapped 6-32 with 9” #18 AWM 1015 strip 3/8”

F1200001A042-M 659CA-1 with one contact crimped without wire and put into housing and one 23” #22 AWM 1007-1569 white lead cut blunt

F1210001A001-M 659A-6V-1 with front mount bracket and 9” #18 AWM 1015 black and white topcoat strip 3/8”

659 Series Back Mount Brackets

Cat. No. A B C

2 1- 1/32” 25/32” 6-32

1184* 1- 1/32” 25/32” 6-32

1341 1- 1/32” 25/32” 0.140 Dia.


F1210002A001-M 659A-6V-2 with 9” #18 AWM 1015 black & white topcoat leads through strip 3/8”




F1210002A007-M 659A-6V-2 with 9” #18 AWM 1015 black & white topcoat leads through strip 3/8” - packed 100/bag

F1201184A005-M 659A-1184 with 9” #18 solid AWM 1015 strip 1/2” not through

F1201184A037-M 659A-1184 with 19” black & 5” white #18 solid AWM 1015 strip 1/2” not through

F1211341A001-M 659A-6V-1341 9” #18 AWM 1015 black & white topcoat leads through strip 3/8”

F1211383A001-M 659A-6V-1383 9” black & white #18 AWM 1015 topcoat strip 1/2”

F1211385A002-M 659A-6V-1385 with 8” #18 AWM 1015 topcoat leads through bracket strip 3/8”

F1211385A004-M 659A-6V-1385 with 15” #18 AWM 1015 topcoat leads through bracket strip 3/8”

F1211386A001-M 659A-6V-1386 with 9” black & white #18 AWM topcoat leads strip 1/2”

F1211387A001-M 659A-6V-1387 with 9” black & white #18 AWM 1015 topcoat leads strip 3/8”

F1211387A002-M 659A-6V-1387 tapped 6-32 with 9” #18 AWM 1015 topcoat leads strip 3/8”

23/64

19/32

17/32

3/4

5/8

659A-1Front Mount

5/8

3/4

5/32

11/32#6-32

25/32

23/64

659A-2Back Mount

659A-1 Front Mount

659A-2 Back Mount

Wcassem

Text Box

Wcassem

Text Box



660 Series Low Profi le Medium Bi-Pin Quickwire LampholdersFor T8 and T12 Lamps


These lampholders, molded in white thermosetting urea or black phenolic, feature quickwire pressure terminals with recessed wire wells to insulate against shorting. High-strength brass alloy quickwire contact accept #18 gauge solid, topcoat or twisted and tinned stranded leads, and are available with a wide variety of mounting methods. The multiple terminal slots permit a double contact connection at each contact point, allowing a jumper connection for rapid start circuits. Silver-plated contacts are available by special order. Consult factory for minimums required.

Knife edge contact design ensures positive “cut-in” lamp/pin contact• Available for rapid start, instant start, program start, and pre-heat ballasts• Performs better during catastrophic end-of-life (EOL) lamp failure• Thermoset urea housing resists heat distortion up to 132°C*•

Catalog/Part

Number

Shunted/

Non Shunted

Face to Back

Thickness

Mounting

660A-13F1220013A008-M

Non Shunted 11/32” Combo 20 gauge upper and 18 gauge lower grooves for slide-on mounting in open-back socket bars

660A-13SHF1220013A010-M

Shunted 11/32” Combo 20 gauge upper and 18 gauge lower grooves for slide-on mounting in open-back socket bars

660A-13-NALSF1220013A006-M

Non Shunted 11/32” Combo 20 gauge upper and 18 gauge lower grooves for slide-on mounting in open-back socket bars. Nuts inserted, less screws

660A-13SH-NALSF1220013A038-M

Shunted 11/32” Combo 20 gauge upper and 18 gauge lower grooves for slide-on mounting in open-back socket bars. Nuts inserted, less screws

Suffix SH= shunted lampholders for use with instant start ballast. Suffix NALS = Nuts inserted, less screws.

*Catastrophic end-of-life failure can generate temperatures at that lamp end far higher that the deformation point of any plastic lampholder. A.L.P. recommends installing ballasts designed to provide integral end-of-life protection.

660A-13Shunted

1

7/81- 21/32

11- 1/4

3/8

23/32

9/32

660A Shunted

23/32

9/32

7/8

3/8

1- 1/41

1- 21/32

1

660A Non Shunted

Wcassem

Text Box

Wcassem

Text Box



661A-100 Series Low Profi le Medium Bi-Pin Fluorescent LampholdersStraight-In For T8 and T12 Lamps


These lampholders, molded of white thermosetting urea, are supplied with straight-in, double-edge contacts for positive lamp grip. High-strength brass alloy quickwire pressure terminals accept #18 AWG solid, topcoat, or twisted and tinned stranded leads. Silver-plated contacts are available by special order. Consult factory for minimums required. Lampholders are available with #20 gauge and #18 gauge mounting grooves. Consult chart for variations. 661A Series circuit interrupting type, featuring disconnect design, is available upon special request.

Edge wipe contacts• Provides positive lamp grip• Designed for fast wiring• Mounting variations available•

Catalog

Number

Mounting Variations

661A-101 20 gauge top & bottom slots - no nut slot

661A-103 20 gauge top 18 gauge bottom slots - no nut slot

661A-111 20 gauge top and bottom slots - with nut slot








Lampholders are suitable for use in fixtures designated for damp or wet locations.661A-100 Series slotted screws are 6-32 x 3/8” length, part #018-59134-375.Phillips head screws are available by special order.Screws and nuts are not included, unless requested.

Add hardware code as suffix to catalog number i.e., 661A-10-NASB.


F1240101A001-M 661A-101 externally shunted

F1240103A001-M 661A-103

F1240111A005-M 661A-111

F1240111A006-M 661A-111sh int. shunt

F1240112A011-M 661A-112 less nut, screw bag

0.055 0.044

1

.990

0.052

0.041

3/16

1- 1/4

7/8

3/8

23/32

1- 19/32

5/1611/32

661A-103

1

0.0440.055

0.041

0.052

.990

11/32

1- 1/43/16

7/8

11/325/16

1- 19/32

3/8

23/32

661A-111

661A-103

Wcassem

Text Box

Wcassem

Text Box



661A-160 Series Medium Bi-Pin Fluorescent Lampholders Floating Action For U-Shaped T8 and T12 Lamps

UL File No. E11033CSA File No. LR11209Rated 660W - 600VThese lampholders, molded of white thermosetting urea, feature straight-in, double-edge contacts for positive lamp grip. Quickwire pressure terminals are available with #20 AWG and #18 AWG mounting grooves. Consult chart for variations. The 661A Series circuit interrupting type, featuring disconnect design, is available upon special request.

Edge wipe contacts• Provides positive lamp grip• Designed for fast wiring• Mounting variations available•

Catalog Number Mounting Variations

661A-168 18 gauge top and 20 gauge bottom slots - no nut slot

661A-171* 20 gauge top and bottom slots - with nut slot

661A-175 20 gauge top, no bottom slot - no nut slot

Lampholders are suitable for use in fixtures designated for damp or wet locations.661A-160 Series slotted screws are 6-32 x 3/8” length, part #018-59134-375.PAL nuts are part #019-12661.Phillips head screws are available by special order.Screws and nuts are not included, unless requested.



Less nuts, less screws

LNLS

Nuts in bulk, screws in bulk

NBSB

Nuts inserted, less screws

NALS

Nuts inserted, screws in bulk

NASB

Nuts and screws inserted

NASA

Add hardware code as suffix to catalog number i.e., 661A-150S-NASB.


F1240168A002-M 661A-168

F1240171A001-M 661A-171

F1240175A001-M 661A-175

0.055

0.044

0.052

0.041

1

7/8

3/16

1- 11/321- 1/14.990

11/325/16

1- 19/32

23/32

3/8

661A-168

* 15,000 piece minimum required

661A-168

Wcassem

Text Box

Wcassem

Text Box



668 Series Quickwire Miniature Bi-Pin Fluorescent LampholdersFor T5 Lamps


These lampholders, molded of black phenolic or white urea, are ideal for mirror case lighting, showcase lighting, or any other confined space applications. High-strength brass alloy contacts, designed for firm lamp grip, are supplied to protect against vibration. Supplied with quickwire terminals that will accept #18 solid, topcoat or twisted and tinned stranded wire. Catalog #668-black, catalog #668A-white. These lampholders are available with various mounting brackets for front or back mounting, or as butt-on mounting, without a bracket. Add the suffix number from the table listing to the catalog number when ordering.

Ideal for mirror case and display lighting• Firm lamp grip prevents vibration• Variety of mounting brackets available•

Catalog Number A B C D

668 19/32” 9/15” 1/16: 0.0150

668-1 19/32” 9/16” 1/16” 6-32


F12800000001-M 668 Front mounted bracket

F1280000A001-M 668A Front mounted bracket

F1280001A001-M 668A-1 Front mounted bracket

13/16 3/8

25/32

668

680A Series Quickwire Fluorescent Circline ConnectorFor Use with High Voltage Instant Starting Transformers


These connectors, molded in white urea, feature quickwire brass alloy contacts that accept #18 AWG solid, topcoat, or twisted and tinned leads. Leads furnished on request. Connector is available with body only or with mounting brackets. Used with high voltage instant starting transformers.

For use with high voltage instant starting transformers• Contacts accept a variety of leads• Molded urea construction•


F1360000A001-M 680A TR

IBO

RO

660W 600V

5/8

5/1619/32

1/4

23/3215/16

5/16

680A

668

680A

Wcassem

Text Box

Wcassem

Text Box



682 Series Medium Bi-Pin Fluorescent Lampholders - Standard SizeFor T8 and T12 Lamps


Standard size lampholders molded of white thermosetting urea. High-strength brass alloy quickwire pressure terminals accept #18 AWG solid, topcoat, or twisted and tinned stranded leads. Multiple terminal slots permit double contact connection at each contact, allowing a jumper connection for rapid start circuits. Silver-plated contacts are available by special order. Consult factory for minimums required. Recessed wire wells guide wire to positive locking with terminals, and completely enclose conductor to insulate against shorts. Consult the chart and dimensional drawings for information on mounting methods available.

Quickwire terminals accept a variety of leads• Permits jumper connection for rapid start circuits• Edge wipe contacts•

Mounting Variations

Catalog Number Panel Mount

682A 20 gauge

682A-4 6-32 screw and nut

682A-8 20 gauge with wide base

682A-10 18 gauge with wide base

Hardware Ordering Option


Less nuts, less screws

LNLS

Nuts in bulk, screws in bulk

NBSB

Nuts inserted, less screws

NALS

Nuts inserted, screws in bulk

NASB

Nuts and screws inserted

NASA

682 Series slotted screws are 6-32 x 3/8” length, part #018-59134-375.PAL nuts are part number #019-12682.Phillips head screws are available by special order.Screws and nuts are not included, unless requested.Lampholders are suitable for use in fixtures designated for damp and wet locations.

Add hardware code as suffix to catalog number i.e., 682A-NASB.

Part Number Catalog Number/

Description

F1380000A004-M 682A

F1380004A003-M 682A-4

F1380004A005-M 682A-4 NASB

F1380008A007-M 682A-8

F1380010A003-M 682A-10

1

0.0420.044

682A

1- 3/165/32

29/321- 11/641- 3/8

23/32

3/8

2- 1/32

11/32 1

5/32 1- 3/16

1- 3/8

2- 1/32

23/32

3/8

11/32

682A-4

0.0420.044

1

1- 3/16

3/8

1- 15/321- 11/32

29/32

11/32

1- 9/322- 1/32

23/32

682A-8

0.0530.057

682A-101

1- 3/16

3/8

1- 15/321- 11/32

29/32

2- 1/32

11/32

1- 9/32

23/32

682A

Wcassem

Text Box

Wcassem

Text Box



10T, 16 and 17 Series Medium-Base (E26) Phenolic Adapters

UL File No. E26302Rated 660W - 250V

The 10T Phenolic Flanged Adapter features a one-piece flanged body with standard male screw shell and reinforcing ring. Molded of black phenolic or white urea, with aluminum screw shell standard. Brass or brass-nickel plated shell available by special order. Two holes spaced 1.275” on centers. Dimensions: 1-11/16” o.d. x 1-1/2” high. Adapter is available with leads or eyelets for soldering. Standard leads are 6” #18 AWM 1015 105°C. Fiber cover available upon request.

Catalog Number 16 Phenolic Adapter - Similar to catalog number 10T with a unique new ratchet ring feature to prevent over-tightening. Reverse ratchet available as special order.

Catalog Number 17 Phenolic Adapter - One-piece phenolic body with standard male screw shell with reinforcing ring molded of black phenolic or white urea. Aluminum screw shell is standard. Brass or brass-nickel plated shell available to order. Dimensions: 1-11/32” o.d. x 1- 3/8” high with no mounting flange. Adapter is available with leads or eyelets for soldering. Standard leads are 6” #18 AWM 1015 105°C.

Catalog Number Rating

17-2 660W - 600V


F0060010T004-M 10T brass-nickel plated screw shell - no leads

F0060010T024-M 10T brass-nickel plated screw shell with 7- 1/2” #18 XFF strip 1/2”

F0060010T036-M 10T brass-nickel plated screw shell with 8” #18 200°C SF-1 strip 3/8” with fiber leads exiting wireways in fiber cover

F0060010T055-M 10T adapter brass-nickel plated screw shell with 20” #18 1015 strip 5/8”

F0060010T059-M 10T brass-nickel plated screw shell - no leads (special plastic)

F0060010T060-M 10T brass-nickel plated screw shell - no leads

F00600160005-M #16 adapter brass-nickel plated screw shell with 6” #18 1015 strip 1/2”

F00600170002-M 17-2 brass-nickel plated screw shell with 3”/9” #18 200°C SF-2 strip 1/2”

F00601130031-M 113 adapter brass shell with 15- 1/8”/14- 7/8” #18 1015 strip 3/16”

F00601130035-M 113 adapter brass shell with 4- 5/8” /4- 3/8” #18 1015 strip 3/16”

F00601130037-M 113 adapter brass screw shell - no leads

10A

1- 1/2

1- 11/161- 9/32

17

1- 3/8

1- 11/32D.

10T

17

Wcassem

Text Box

Wcassem

Text Box



26 and 27 Series Quartz Halogen LampholdersFront Flange Mounting


This lampholder features a rugged two-piece porcelain body to withstand high ambient temperatures. Corrosion-resistant housing and mounting bracket with reinforced mounting plate are also included. Lampholder is assembled with a one-piece silver-plated solid copper recessed contact, and a stainless steel spring to maintain contact pressure. The telescoping lampholder is the same on both ends, giving a floating condition to the lamp to absorb vibration. Standard leads are 18” #18 gauge SF-1, SEW-1 200°C wire. Also available are 250°C wire leads.

Withstands high temperatures• Stainless steel spring maintains contact pressure• Absorbs vibration•

Catalog

Number

Description Temperature Rating

Wire Leads

Ratings Lamps

26* 18” #18 TXGT leads 250°C 3000W - 600V Tungsten-Halogen

27* 18” #18 SF-2 leads 200°C 3000W - 600V Tungsten-Halogen


F01200260036-M 26 with 26” NAT #14 TXGT lead strip 1/2”

F01200270038-M 27 with 18” #18 200°C SF-2 lead strip 1/2”

MAX. PUSHED OUT POSITON OF PLUNGER

1- 7/6415/16

53/64D.

1/16

1- 9/16

1- 7/32

31/3211/64

21/32

1- 11/16

26

26

Wcassem

Text Box

Wcassem

Text Box



26A and 27A Series Quartz Halogen LampholdersRear Flange Mounting


This lampholder features a rugged two-piece porcelain body to withstand high ambient temperatures. Corrosion-resistant housing and mounting bracket with reinforced mounting plate are also included. Lampholder is assembled with a one-piece silver-plated solid copper recessed contact, and a stainless steel spring to maintain contact pressure. The telescoping lampholder is the same on both ends, giving a floating condition to the lamp to absorb vibration. Standard leads are 18” #18 gauge SF-1, SW-1 200°C wire. Also available are 250°C wire leads.

Withstands high temperatures• Stainless steel spring maintains contact pressure• Absorbs vibration•

Catalog

Number


Wire Leads

Ratings Lamps

26A 18” #18 TXGT leads 250°C 3000W - 600V Tungsten-Halogen

27A 18” #18 SF-2 leads 200°C 3000W - 600V Tungsten-Halogen


F0120026A038-M 26A with 26” NAT #14 TXGT lead strip 1/2”

F0120027A017-M 27A with 18” #18 200°C SF-2 lead strip 1/2”


MAX. PUSHED OUT POSITON OF PLUNGER

26A19/64

1/16

53/64D.

31/32

11/64

1- 9/16

1- 7/32

21/32D.

23/32

27A

Wcassem

Text Box

Wcassem

Text Box



34 and 35 Series Quartz Halogen LampholdersFront Flange Mounting


This one-piece porcelain body withstands high ambient temperatures. Its plunger does not extend beyond the metal housing and features a corrosion-resistant housing and mounting bracket. The lampholder is assembled with silver-plated, solid copper recessed contacts. The body has access slots for easy lamp mounting. Standard leads are 18” #18 gauge SF-1, SEW-1, 200°C wire. Also available are 250°C wire leads.

Withstands high temperatures• Easy mounting• Variety of mounting styles• Absorbs vibration• Very economical •

Catalog

Number


Wire Leads

Ratings Lamps

34 18” #18 TXGT leads 250°C 3000W - 600V Tungsten-Halogen

35 18” #18 SF-2 leads 200°C 3000W - 600V Tungsten-Halogen

134 18” #18 TXGT leads 250°C 3000W - 600V 5kV pulse Metal Halide (HQI)

135 18” #18 SF-2 leads 200°C 3000W - 600V 5kV pulse Metal Halide (HQI)


F01200340011-M 34 with 18” #14 TXGT lead strip 5/8”

F01200350011-M 35 with 9” #18 SF-2 black strip 1/2”



F01200350040-M 35 with 48” #18 SF-2 black strip 1/2”

F01201340037-M 134 with 18” #18 250°C TXGT leads strip 1/2”

15/16

53/64D.

1/16

31/32

11/64

1- 9/16

1- 7/32 21/32D.

34

34

Wcassem

Text Box

Wcassem

Text Box

Wcassem

Text Box

Wcassem

Text Box



425 Series Phenolic Twin-Light Lampholders


These twin-light lampholders feature an all-molded construction which, eliminates the need for metal brackets. They are ideally suite for ceiling fixtures, wall fixtures, and aquariums. They can be molded using 175°C black phenolic (Catalog Number 425) or 100°C white urea (Catalog Number 425U). Various fittings and heights are available to meet your exact needs. Lampholders with a snap spring are available with a ground wire (Catalog #s 9425 or 9425U). The 425 Series can be ordered with two conductor 18/2 SPT-1 with molded polarized plug or other end cut blunt, and with in-line switches.

Twin-light lampholders with switches are Underwriters Laboratories recognized components. Lampholders without switches, with standard 18 gauge leads are IL listed. Lampholders with special usage 20 gauge leads are Underwriters Laboratories recognized components.

Catalog

Number

Top “C”

Dimension

Bottom “B”

Dimension

Top Fitting “A”

Dimension

Bottom Fitting “A”

Dimension

Rating

425-7L 1- 21/32” 1- 5/32” Snap Spring None 660W - 250V


F02707L00003-M 425-7L with 19” #18 AWM 1015 leads strip 1/2”

F02707L00004-M 425-7L with 12” #18 AWM 1015 leads strip 1/2”

1/8-27 STD.PIPE THD.

2- 31/64

1

1- 17/64

3/4

31/32

1- 21/32

1- 5/32

3/4

7/161- 17/64

13/32

3/4

425-72M

425

Wcassem

Text Box

Wcassem

Text Box



505A Series Keyless, Cap, Porcelain LampholdersWith Screw Terminals or Leads

UL File No. 11033CSA File No. LR11209Rated 660W - 250V

Supplied standard with aluminum screw shell; brass or brass-nickel plated screw shell • also available to order.Brass center contact is standard. Nickel brass plated center contacts are available. Optional • special leaf spring or coil spring loaded center contacts are available. Please specify.Die-cast cap with fiber, 1/8” IP or 1/4” IP available. Please specify whether cap is to be • assembled or in bulk. When suited for wet locations, Nobestos fiber is available upon request.When ordering with leads, please specify lead length and type and strip length; also • specify whether leads are to be placed through cap or cut wireways (notches).505A Series also available with screw (threaded 6-32 x 1/2”) or bushing mounting • (threaded 6-32).Porcelain body can be supplied with one or two side notches, glazed or unglazed. • Reinforcing washers for placement inside screw shell are available upon request.• When ground wire is required, a “9” should be added as a prefix to the catalog number. All • ground leads are eyeletted to cap.When ordering Catalog Number 505A specify with or without 1/8” IP die-cast cap. Order • Catalog Number 506A to specify with 1/4” IP cap.


F03800060018-M 505A-6 unglazed with one side notch 84” #18 1015 Strip 1/2” fiber separate

F03800060039-M 505A-6 with terminals glazed with two side notches no cap fiber separate

F03800060044-M 505A-6 glazed with one side notch, 25” #18 SF-1 strip 1/2”

F03800060046-M 505A-6 glazed one side notch, with leaf spring, reinforcements washers and two bushings and 15” #18 SF-1 blunt

F03800060047-M 505A-6 glazed with one side notch with 6-32 bushings installed, reinforce-ment washer with 36” 18/3 SJTOW black cord, ROJ 6” on socket end, black & white conductors on socket end to be covered with 3” #8 fiberglass sleev-ing. ROJ 2- 1/2”, strip all conductors 1/2” on customer end

F038505A0073-M 505A glazed one side notch with cap 12” 1015 strip 1/2”

F038505A0132-M 505A unglazed 0SN 60” 1015 blunt leads through cap

F038505A0133-M 505A glazed, no side notches with 5/8” long screws inserted with 30” #18 SF-1 strip 1/2”

F038505A0137-M 505A glazed, no side notches, 9” black and white XFF 150°C leads, strip 1/2” with fiber rubberized insulator gasket packed in bulk

*Standard Stock: When ordering Catalog Number 505A with 1/8 IP cap refer to Part Number F03800100C (unglazed, no side notches, two mounting screws captive, aluminum screw shell, screw terminal, cap bulk packed).

19/32D.

7/16

2- 1/16

1- 1/2D.

1/8 Pipe Thread

505A*

6-32 BUSHING (2)

27/32OPTIONALSIDE NOTCH

505A-6

27/326-32 SCREWS (2)

6-32 BUSHING (2)27/32

1- 5/8

1- 1/2

505A-9

505A

505A withscrew terminals

Wcassem

Text Box

Wcassem

Text Box

Wcassem

Text Box

Wcassem

Text Box



505A Series Variations

Catalog Number

Electrical Mounting Finish Side Notches

Ratings

Leads Terminals Bushings Screws Glazed Unglazed All 660W

505A X X X X None 250V

X X X X 1 250V

X X X X None 250V

X X X X 1 250V

505A-6 X X X X None 250V

X X X X 1 250V

X X X None 250V

X X X 1 250V

X X X 2 250V

505A-9 X X X 2 250V

505A Series Keyless, Cap, Porcelain LampholdersWith Screw Terminals or Leads

Wcassem

Text Box

Wcassem

Text Box



557-37 Series Phenolic Fixture Lampholders with Insulating Cap


The 557-37 Series phenolic cap completely covers and insulates the wire lead terminal connection to comply with UL safety standards. Available on Catalog Number 557 phenolic lampholders, with any length and type of leads, to order. Cover has regular mounting to fit our complete line of hickeys, brackets and springs. Phenolic body is molded of heat-resistant phenolic. Standard screw shell is aluminum, with brass or brass-nickel plated shell available to order. Ground wire available. Add “9” to prefix.

Catalog Number 557-37-57 with side hickey lampholder with insulating cap and side hickey mounted up or down. Variations in wiring option: Wire leads through side notch in cap and through hickey. Both wires are put through the notch in the cap and threaded through hickey.

Catalog Number 557-37 lampholder with insulating cap and spring attached, with wire leads through individual wireways. Insulating cap accepts all springs used in the 557 Series.


F05000370036-M 557-37-57 down 5/16R nipple with 6” #18 AWM 1015, leads routed through notch in the cap, and leads through the hickey

F05000370055-M 557-37-305 up and 9” black #18 AWM 1015 strip 1/2” with 13” white # 18 AWM 1015 strip 1/2”

F05008570010-M 557-38-857 down with 13- 3/4” (AWL) #18 black AWM 3173 125°C topcoat strip 7/16” with 14” (AWL) #18 white AWM 3173 125°C topcoat lead strip 7/16”

F05008570011-M 557-38-857 down with 25” (AWL) #18 black and white AWM 3173 125° strip 1/2”

5/16

1- 11/16

1- 1/4D.

557-37-A

1- 1/4

1- 11/16

5/16

557-37-57

D

557-37-57 DN

Wcassem

Text Box

Wcassem

Text Box



557P Series Keyless, Cap, Porcelain LampholdersSeries 557P-147 through -150


This unglazed porcelain body is available with screw terminals or with leads attached. When ordering with leads, specify length and type of leads desired. Lampholder is supplied with aluminum screw shell. Brass or brass-nickel plated shell is available to order. Lampholder is available with screws or bushings for mounting. Also available with caps. Caps furnished bulk packed when the lampholder is supplied with terminals.

557P-147 through 150 Variations

Catalog Number Electrical Mounting Side Notches Listing

557P-147 leads 1/8” IP cap none

557P-148 leads 6-32 bushings one

557P-150 leads 6-32 screws none


F05501470057-M 557P-147 with 18” #18 AWM 1015 leads strip 3/8”

F05601480029-M 557P-148 with side notch, bushings installed attached to 10T adapter with 10” #18 SF-1 between with fiber 011-61010 on back of adapter

F05601480043-M 557P-148 with side notch, 7- 1/8” #18 white SF-1 with 012-53808 lug and 7- 5/16” # 18 black SF-1 with 012-53808 lug

F05601480050-M 557P-148 with side notch 10- 1/2” #19 SF-1 with 012-53808 lug on each lead

F05601480061-M 557P-148 with one side notch with bushings with 30” black and white SF-1 leads strip 1/2” with fiber insulator 011-61505A packed separate

F05201480003-M 557P-148 unglazed CNPS, NPCC with 6-32 bushings installed, reinforcement washer with 36” 18/3 SJTOW black cord, ROJ 6” on socket end, cut back black and white leads on socket end 3”, strip green conductor on socket end 1/4” and leave free black and white conductors on socket end to be covered with 3” #8 fiberglass sleeving. ROJ 2- 1/2” strip all conductors 1/2” on customer end

F05201480004-M 557P-148 unglazed CNPS, NPCC with 6-32 bushings installed, reinforcement washer with 58” 18/3 SJTOW black cord, ROJ 6” on socket end, cut back black and white leads on socket end 3”, strip green conductor on socket end 1/4” and leave free black and white conductors on socket end to be covered with 3” #8 fiberglass sleeving. ROJ 2- 1/2” strip all conductors 1/2” on customer end

F05201480005-M 557P-148 with 7- 1/2” #18 AWM 1015 strip 1/2” and reinforced washers

F05201500011-M 557P-150 attached to a 10T adapter with an 001-11035 bracket eyeletted. Fiber 011-61505A on the porcelain socket. The adapter and bracket assembly screwed into the socket

1/8 PIPE THREAD19/32

D.

7/16

1- 7/8

1- 3/8D.

557P-147

27/32

1- 1/2

1- 3/8D.

557P-148

557P-147

557P-148

Wcassem

Text Box

Wcassem

Text Box



561 Series High-Heat Bottom Turn Knob Socket


This one-piece phenolic bottom turn knob socket is molded of high-heat phenolic throughout. Featuring a built-in rotary switch with non-removable knob or less knob with 4-36 threaded stem. It is supplied with 3/8-27 shank by 11/32” long below hex nut, allowing for mounting not over 1/8” thick. A 1/8 IP shank is available to order. Available with screw terminals or with wire leads attached. Standard leads are 6” #18 AWM 1015 105°C. Other lengths or types of wire are available to order. The socket is available in four bracket sizes. Overall lengths are measured from top of socket to bottom of bracket. Removable knobs are available in metal or phenolic. Finishing nuts are supplied separately.

One-piece construction• High-heat phenolic• Suitable for pin-up lamps and bullet lights•

Part number Catalog Number/Description

F06620010022-M 561-1 aluminum screw shell with 3” #18 AWM 1015 strip 3/8” with hex nut installed and aluminum finishing nuts separate

Switch HardwareHex nuts available in 1/8”-27 x 1/16” in zinc or black oxide finish. 1/8-27 x 3/32” in zinc • plated. 3/8-27 x 1/16” in brass plated and black oxide finish. 3/8-27 x 1/8” in brass plated. Finishing nuts available in 1/8-27 double knurled in nickel, brass or black oxide finish. • 3/8-27 single knurled in nickel, brass or black oxide finish. Switch knobs available in long brass knurled, small brass knob, small zinc plated knob, • and small phenolic knob.

1- 1/4

2

29/32

561

561

571V Series Snap-In Porcelain Lampholders for Recessed Lighting FixturesRear Mounted

With leads attachedUL File No. E11033Rated 660W - 250V

This unglazed porcelain body supplied with any length and type of leads. This lampholder is designed to reject the UL probe.

Sockets featuring recessed wire terminals (Style V Series) comply with the accessibility probe requirement of UL Standard 1571. When ordering the 557 or 571 Series, add the suffix “V”.

Lampholders rated 660W - 600V are available. Consult factory.


F0760000V001-M 571V with 36” black and white #18 XFF strip 1/2”

F0760030V008-M 571V-30 with 14771-250 spring with 26” black and white #18 SF-1 strip 1/2”

571V

1- 3/8D.

5/16

1- 1/4

D.1- 21/32

571

Wcassem

Text Box

Wcassem

Text Box



571V-30 Series In-Line Thermal Protection Wiring Harness Set

UL File NO. E123530

In-Line Thermal Protection Wiring Sets can be custom designed for your specific applications. Thermal protection devices are available in temperature ratings from 70°C and up. Devices can be provided with insulating sleeves of various materials and temperature ratings, or with our patented snap-in molded housing (suitable for temperatures up to and including 130°C). Thermal protection device ratings are available in 5° increments. When ordering, specify thermostat value in °C.

Specify wire type, lead lengths, and strip length. Also, specify length and type of wire lead between thermal unit and lampholder.

The molded housing assembly is a recognized component under File Number E123530 (temperature indicating and regulating equipment).


F0760000V031-M 571V BSSNP with 24- 5/8” # 18 white SF-1 lead strip 1/2” with 9- 1/8” #18 black SF-1 lead to #020-115A thermal switch with 24- 1/2” # 18 black SF-1 lead off switch strip 1/2”

F0760000V033-M 571V with 30” #18 white SF-1 lead strip 1/2” with 16” #18 black SF-1 lead to #020-110A thermal switch with 26” #18 black SF-1 lead off switch strip 1/2”

F0760030V034-M 571V-30 with #007-14775 spring with 24- 5/8” #18 white XFF strip 1/2” with 8- 3/4” #18 black XFF to #020-110A thermal switch without cover, with 20- 1/8” #18 black XFF strip 1/2” off switch. Leave insulation on both strip

F0760030V038-M 571V-30 with #14773-250 spring, BNPSS with 23- 1/4” #18 white SF-1 strip 5/8” with 10” #18 black SF-1 to #020-110A thermal switch with #98040 insu-lation sleeve closed with 17- 1/4” (AWL) #18 black XFF strip 5/8” off switch

F0760030V039-M 571V-30 with #14773-250 spring, BNPSS with 23- 1/4” #18 white SF-1 strip 3/8” twist and full tin with 10” #18 black SF-1 to #020-110A thermal switch with #98040 insulation sleeve closed with 17- 1/4” (AWL) #18 black XFF strip 3/8” twist and full tin

F0760030V045-M 571V-30 with #14773-250 spring, BNPSS with 26” (AWL) #18 white SF-1 strip 5/8” with 12” #18 black SF-1 to #020-110A thermal switch with #98040 insulation sleeve closed with 22” (AWL) #18 black XFF strip 5/8” off switch

F0760030V046-M 571V-30 with #14773-250 spring BNPSS with 23” (AWG) #18 white XFF strip 5/8” with 4- 1/2” #18 black XFF to #020-105A thermal switch with #98040 insulation sleeve closed with 19” (AWG) #18 black XFF strip 5/8” off switch

F0760030V063-M 571V-30 with# 007-14775 spring BNPSS with 24- 5/8” #18 white XFF strip 1/2” with 8- 3/4” #18 black XFF to #020-110A thermal switch without cover with 20- 1/8” #18 black XFF strip 1/2” off switch

F07630021000-M 571V-30 with #007-14775 spring, with 30- 5/8” white #18 XFF strip 1/2” 15- 3/4” black #18 XFF to #020-105A thermal switch without cover and 22- 1/8” black #18 AWM 125° strip 1/2” off the switch

F07630022000-M 571V-30 with #007-14775 spring, with 30- 5/8” white #18 SF-1 strip 1/2”, 15- 3/4” black #18 SF-1 to #020-105A thermal switch without cover and 22- 1/8” black #18 AWM 125° strip 1/2” off the switch

WH

ITE

BLA

CK

BLA

CK

571V-30 with thermal switch & insulation sleeve closed

571V-30

Wcassem

Text Box

Wcassem

Text Box



571V-60 Series In-Line Thermal Protection Wiring Harness Set

In-Line Thermal Protection Wiring Sets can be custom designed for your specific applications. Thermal protection devices are available in temperature ratings from 70°C and up. Devices can be provided with insulating sleeves of various materials and temperature ratings or with our patented snap-in molded housing (suitable for temperatures up to and including 130°C). Thermal protection device ratings are available in 5° increments. When ordering, specify thermostat value in °C.

Specify wire type, lead lengths, and strip length. Also, specify length and type of wire lead between thermal unit and lampholder.

The molded housing assembly is a recognized component under File Number E123530 (temperature indicating and regulating equipment).

UL File No. E123530


F0760060V002-M 571V-60 with #14771-600 spring with 20- 5/8” white #18 SF-1 strip 7/16” and 8- 1/8” black SF-1 to #020-120A thermal switch with 14- 3/4” black #18 AWM 1722 strip 7/16” off switch

F0760060V011-M 571V-60 with #14771-600 spring 20- 5/8” #18 white 200°C SF-1 lead strip 7/16” with 8- 1/8” (AWL) #18 200°C blue SF-1 lead to #020-090A thermal switch with 14- 3/4” #18 XFF black lead strip 7/16” off switch

F0760060V012-M 571V-60 with #14771-600 spring, 20- 5/8” #18 white 200°C SF-1 lead strip 7/16” with 8- 1/8” #18 200°C red SF-1 lead to #020-100A thermal switch with 14- 3/4” #18 AWM 125°C black lead strip 7/16” off switch

F0760060V018-M 571V-60 with #14771-600 spring, 20” (AWG) #18 white 200°C SF-1 lead strip 3/8” with 8- 1/4” (AWG) #18 200°C black SF-1 lead to #020-100B thermal switch with #06098040 sleeve on 17” (AWG) #18 200 °C black strip 3/8” off switch

WH

ITE

BLA

CK

BLA

CK

571V-30 withthermal switch

571V-60

Wcassem

Text Box

Wcassem

Text Box



570-2 Series Snap-In Porcelain Lampholders for Recessed Lighting Fixtures


These one-piece porcelain lampholders are ideally suited for use in recessed lighting fixtures. All feature a rust-proofed and tempered mounting spring attached to the lampholder. The standard screw shell is aluminum, with brass or brass-nickel plated shells available to order. Each of these lampholders can be supplied with any type and length of leads.

Each of these lampholders can also be furnished with an insulated thermal switch attached in-line, which is recognized by UL under the Wiring Harness program.

1- 11/32D.

27/32

27/32

1- 11/16D.

570-2


F07200020005-M 570-2 with 30” #18 200°C SF-1 leads strip 1/2”

F07200020009-M 570-2 with 9” #18 AWM 1015 leads strip 1/2”

F07200020037-M 570-2 with 30” #18 200°C SF-1 leads strip 1/2”

F07200020052-M 570-2 with BNPSS with lamp grips with 36” #18 AWM 1015 strip 1/2”

570-2

616 Series Threaded Phenolic Lampholders


This medium-base phenolic lampholder features an outer threaded body with standard aluminum shell.


616 phenolic lampholder


F09410000004-M 616 aluminum screw shell with 17” #18 AWM 1015 leads strip 5/8”

27/32

1/2 1- 9/16

3/16D.

1- 9/16

1- 13/16

23/32

1- 9/16

616

616

Wcassem

Text Box

Wcassem

Text Box



624 Series Quartz Halogen Lampholders

CSA File No. LR11209Rated 500W - 125V

This double-contact bayonet-base socket offers new operating convenience with sin-gle-ended quartz halogen lamps. This socket positions the lamp more accurately and holds the lamp more securely, minimizing the possibility of the lamp shaking loose from vibration. It is designed to provide optimum heat sink for cooler operation while in the fixture.

Its construction complies with Underwriters’ Laboratories specifications for sockets operating under heat conditions generated by quartz halogen lamps, and it is manu-factured with high temperature leads. Sockets are supplied with 200°C or 250°C 6” standard wire leads, with other lengths available to order. These sockets can be fitted with all standard brackets and hickeys, as shown on the bayonet socket listings.

For general lighting, optical devices and instruments• Stage, film, and TV lights• Withstand high heat for quartz halogen lamp uses•


*624A with 6” 200°C wire leads

*624B with 6” 250°C wire leads


F0984A020106-M 624A-2 with 20” #18 200°C SF-1 black leads strip 1/2”

F0984A020108-M 624A-2 attached to 10A adapter BNPS, with SF-2 #18 black between sockets, 624A-2 to be eyeletted to 10A adapter

F0984B050089-M 624B-5 with 8” #18 TXGT 250°C strip 3/16” with 1/8 x 27 hex nut separate

15/16

(2) 5/32 D. Holes

1- 5/161- 5/8

624A

624

Wcassem

Text Box

Wcassem

Text Box



740 Series Medium & Ad Medium Base/HID Pulse Rated Porcelain Lampholders


UL Recognized Component E11033. Supplied with two captive bushings threaded 6-32 on 27/32” centers.

This medium base 4kV pulse rated porcelain lampholder, with 660W - 600V 4kV starting pulse., is for use with high pressure sodium lamps. The glazed porcelain lampholder is supplied with a brass-nickel plated screw shell. Standard leads are 9” #18 gauge SF-2 200°C -600 V wire. Other types or lengths of 600 V wire leads are available to order.

A corrosion-resistant leaf spring under the center contact is available upon request. Lamp grip screw shell is available upon request.

Catalog Number Side Notches

740-12 2

4KVPULSERATEDTRIBORO

1- 17/32D.

1- 21/32

3/16

27/32

6-32BUSHINGS

START OFTHREADS

740-12Part Number Catalog Number/Description

F15000120003-M 740-12 brass-nickel plated screw shell, leaf spring and 12” #18 200°C SF-2 strip 1/2”

F15000120004-M 740-12 brass-nickel plated shell, leaf spring and 36” #18 200°C SF-2 strip 1/2”

F15000120005-M 740-2 bushings installed brass-nickel plated screw shell with 9” #18 200°C SF-2 leads strip 1/2”

F15000120006-M 740-12 brass-nickel plated screw with 36” #18 SF-2 strip 1/2”

F15000120013-M 740-12 brass-nickel plated screw shell with 18” #18 200°C SF-2 leads strip 1/2” with 2 side notches

F15000120018-M 740-12 with 9” #18 200° SF-2 leads strip 1/2”

F15000120026-M 740-12 with 24” #18 200°C SF-2 strip 1/2” with 6-32 bush-ing installed and reinforcement washers

F15000120028-M 740-12 brass-nickel plated screw shell with lamp grip leaf spring under contact, with reinforcement washers and 12” #18 SF-2 leads strip 1/2” fiber insulator packed separate

F15000120032-M 740-12 brass-nickel plated screw shell with lamp grip leaf spring under contact, with reinforcement washers and 28” #18 SF-2 leads strip 1/2” fiber insulator packed separate

F15000120035-M 740-12 brass-nickel plated screw shell with 72” #18 SF-1 strip 1/2”

F15000120036-M 740-12 brass-nickel plated screw shell with 30” #18 SF-2 strip 1/2” with leaf spring under contact and reinforcement washers

F15000120037-M 740-12 brass-nickel plated screw shell with lamp grip leaf spring under contact with reinforcement washers and 18” #18 SF-2 leads strip 1/2” fiber insulator paced separate

F15000120038-M 740-12 brass-nickel plated screw shell with 30” #18 SF-2 strip 3/8” with leaf spring under contact (no bushing)

740

Wcassem

Text Box

Wcassem

Text Box



770-2, 770-7 and 771 Series Snap-In High Heat Phenolic Lampholders

UL File No. E11033CSA File No. LR11209Rated 660W - 250VTested by Underwriters Laboratories, Inc. at 200°C for 1,000 hours

Catalog Number 770-2 Front MountedHigh-heat phenolic body supplied with any length and type of leads. Spring clip will accommodate material thicknesses from 0.032 to 0.093 inches. Catalog Number 770-1 has a panel thickness range of 0.060 to 100 (1 or 2 panels).Catalog Number 770-2 has a panel thickness range of 0.032 to 0.060.


F15400020002-M 770-2 brass screw shell with 9” #18 AWM 1015 strip 3/8”

F15400020028-M 770-2 10’ #18 white AWM 1015 strip 3/8” and 15” #18 black 1015 strip 1/2”

F15400020037-M 770-2 with 15” #18 XFF strip 1/2” black and white

F15400020058-M 770-2 with spacer under spring aluminum screw shell with 6- 1/2” 18/2 black SPT-1 105°C with bold white stripe on ribbed conductor and with black polarized plug

F15400020081-M 9770-2 with 15” #18 AWM 1015 strip 1/2” with 15” #18 bare copper

F15400020084-M 770-2 with 5” #18 red AWM 1015 strip 3/8” with 4” #18 white AWM 1015 strip 3/8”

F15500000020-M 771 with 14” #18 white AWM 125°C and with 9” #18 black AWM 125°C with #012-53605 AMP lug attached on both leads

Catalog Number 771 Rear MountedHigh-heat phenolic body supplied with any length and type of leads. Catalog Number 771 with leads attached. Designed specifically for recessed down lighting.

1- 11/16D.

1- 37/64

1- 23/64D.

19/64

23/64

770-2

1- 5/8 D.FLANGE

1- 23/64

1- 9/16

5/16

7/64

1- 53/64

21/64

1- 7/16

771

D.

D.

770-2

Wcassem

Text Box

Wcassem

Text Box



788 Series Snap-In Porcelain LampholdersSurface Mounted


This surface mounted lampholder features an unglazed porcelain body, with a flange supplied with any length and type of lead.

Catalog Number 788 with leads attached UL File No. E11033 Rated 660W - 250V


F171010T0002-M 1788 with 10” #18 SF-1 leads attached to 10T Adapter with brass-nickel plated screw shells on both socket and adapter with fiber on adapter

1- 21/32

1- 3/8D.

D.

1- 5/8

9/16

788

788

Wcassem

Text Box

Wcassem

Text Box



800 Series High Heat Lampholders

UL File No. E11033CSA File No. LR11209Tested by Underwriters Laboratories, Inc at 200°C for 1,000 hoursRated 660W - 250V

These lampholders are fabricated from 200°C rated phenolic and come with a die-cast metal cap with a set screw and fiber. Nobestos fiber is also available, but it must be specified. Overall height is 1- 41/64” without the cap and 2- 3/32” with the cap.

Standard screws are 6-32 x 1/2” fillister head full thread when the lampholder is supplied without a cap. When cap is supplied, either on or off, standard screws are 6-32 x 3/8” fillister head with full thread.

The lampholder comes with a standard center contact. A spring-loaded center contact is available with a leaf spring only, and, if desired, it must be specified in the ordering description. Reinforcing washers must also be specified if required.

When the lampholder is supplied with leads attached, all through instructions must be specified.

Catalog

Number

Side

Notches

Wire Leads Terminals Mounting

Screws

Mounting

Bushings

802 2 X X


F15680200002-M 802 with 2 side notches with screw terminals less mounting screws with fiber separate

F15680200004-M 802 with 2 side notches with screw terminals

1- 41/64

1- 13/32

1- 9/16

1- 21/64

mounting holefor 6-32 captive bushings or 6-32captive screws

2 optional side notch

forms to acceptwire leads

810-50

802

Wcassem

Text Box

Wcassem

Text Box



1570-2 and 1770-2 Series Lampholders/Adapter (E26) Harness Combinations

UL File No. E26360

This wiring harness designed for use in recessed downlighting features a high-heat phenolic or porcelain snap-in lampholder attached to a phenolic adapter. Many combinations of porcelain or phenolic sockets are available. Specify wire length and type between the socket and adapter.

Many combinations available• Withstands high heat• Durable•

Harness Combinations

Catalog Number Load Fitting Line Fitting

1570-2 570-2 lampholder attached to 10T or 17 phenolic adapter

1770-2 770-2 lampholder attached to 10T or 17 phenolic adapter


F16500170002-M 1570-2 attached to #17-1 adapter with 9” #18 XFF leads between socket and adapter with brass-nickel plated screw shell on both devices

F17400020002-M 1770-2 with #17-2 adapter with brass-nickel plated screw shell on both devices with 9” #18 XFF between socket and adapter

Cat. No. 17

Cat. No. 770-2

1770-2

CAT. No 17

CAT. No 570-2

1570-2

1770-2 17-2

Wcassem

Text Box

Wcassem

Text Box



H567-201 Series High Heat Phenolic Keyless LampholdersFor Outdoor Castings

UL File No. E11033CSA File No. LR11209Rated 660W - 250VTested by Underwriters Laboratories, Inc. at 200°C for 1,000 hours

These lampholders, molded of 200°C phenolic, are designed specifically for fast assembly in outdoor castings. The standard screw shell is aluminum, with brass or brass-nickel plated screw shell available to order. These lampholders are supplied with leads attached, or with eyelets for soldering. Length and type of leads must be specified when ordering. Reinforcing washers are available on request.

These lampholders feature several different installation options that allow the user to choose configurations for any assembly requirements.

H567 Series is sold without brackets. If bracket is required, see 557 Series. Ground wire available, add “9” to prefix.

Catalog Number H567-201

With captive 8-32 PAL nut.

Note wiring positions: Positions 3 or 4 must be black, positions 5 or 6 may be white or optionally positions 1 or 2. Standard wiring position is black 3 and white 5.


F07002010015-M H567-201 brass-nickel plated screw shell and center contact with 36” #18 AWM 1015 strip 5/8” lugged leads using 3-5 pattern

1- 15/32

1- 11/32D.

H567-201

H567-201

Wcassem

Text Box

Wcassem

Text Box



403 Series Snap-In Convenience Outlet and Male Load Plug

UL File No. E18457CSA File No. LR11211Rated 15A - 125V

These snap-in outlets, molded of black phenolic or white urea, are designed specifically for surface mounting in fixtures and appliances. They also are adapted for use with flat type plug caps. The outlet is supplied with tempered-steel spring clips to hold-in place. This spring will accommodate a wall thickness of 0.031” to 0.062”. Standard leads are 6” #14 AM 1015 105°C leads, with other lengths available to order.

For appliances, lighting fixtures, home entertainment systems and general • applicationsDesigned to allow surface and panel mounting• Snap-in design allows easy mounting and tight fit•


403-1 Snap-in outlet, black with #14 or #16 gauge leads

403A-1 Snap-in outlet, white with #14 or #16 gauge leads

403-11 Snap-in outlet, with quick tab terminals -black

403A-11 Snap-in outlet, with quick tab terminals -white

*403-21 Snap-in outlet, black with #18 gauge leads

*403A-21 Snap-in outlet, white with #18 gauge leads

*403-25 Snap-in outlet, black with #18 gauge wire exits back of outlet

*403A-25 Snap-in outlet, white with #18 gauge wire exits back of outlet

* UL recognized components (not CSA)


F02800010009-M 403-1 6” #14 1015 black and white

F02800110004-M 403-11

F02800210014-M 403-21 with 6” #18 1015 black and white

F02800210022-M 403-21 with 18” #18 1015 black and white

F02800250003-M 403-25 with 6- 1/4” #18 1015 black and white

3/16

1- 5/32

29/32

29/32

403-1

1- 5/32

1- 5/3229/32

3/16

403-11

403-1

403-11

Wcassem

Text Box

Wcassem

Text Box



655 Series Snap-in Outlets 3-Wire and 4-Wire U-GroundNarrow Rectangular Face

UL File No. E18457Rated 15A - 125V

These snap-in outlets, molded of black phenolic or white urea resin, are designed specifically for use in narrow locations and shallow canopies. These outlets meet the latest 3-wire National Electrical Code grounding requirements.

Tempered-steel spring clips with corrosion-resistant finish are supplied to accommodate any material from 0.031 to 0.062” thick. Standard leads are 2 #14 gauge 105°C 6” black and white AWM leads and one #16 gauge 105°C 6” green AWM lead. Any length and type of wire is available to order. These outlets are also available with 4 wire ground lead styles with terminal lugs attached for permanently fastening the ground lead to the fixture.

When ordered with #18 gauge AWM UL 1015, product is a Recognized Component. Use -31 as suffix when ordering.

Snap-in for easy installation• For use in narrow and shallow installations• Clips fit a wide range of material thicknesses•

27/32

5/32

1- 7/32

15/16

655A

Catalog Number Color Description

655 black 3-wire grounded outlet

655A white 3-wire grounded outlet


F1180000A007-M 655A 6” #14 1015 and 6” green #16 strip 1/2”

F1180000A008-M 655A 6” #14 1015 black and white with #8 ring lug on green wire

F11800000003-M 655 6” #14 1015 black and white, 6” green #16 strip 1/2”

F1180031A001-M 655A-31 2- 1/2” black, white and green with #808 lugs (3) leads

655

Wcassem

Text Box

Wcassem

Text Box



675 Series U-Ground Snap-In Male Load Plugs

UL File No. E26302 CSA File No. LR92847 NEMA 5-15P

These load plugs, molded of black phenolic or white urea, feature tempered-steel spring clips with a corrosion-resistant finish. Plugs are also supplied with brass blades and grounding-pin.

Terminations: Load plugs are available in the following combinations: Two 250°C quick connect tab terminals, one green grounding lead #16 AWM 1015 105°C, two 250°C quick connect tab terminals and ground terminal screw; two #14 AWM 1015 105°C leads and one green grounding lead #16 AWM 1015 105°C. When ordered with #18 AWM UL 1015, product is a Recognized Component. Use -31 suffix when ordering.

Matches 675-11 for lighting fixtures and major appliances• Meets three-wire code requirements• Snaps in for easy installation and secure fit•


675-51 black male terminals and #16 green ground leads

675A-51 white male terminals and #16 green ground leads

675-81 black #14 plastic leads and #16 green ground lead

675A-81 white #14 plastic leads and #16 green ground lead


F13200510003-M 675-51 6” #16 green 1015 with #10 ring lug

F1320081A001-M 675A-81 6” #14/#16 1015 green strip 1/2”

F1320081A016-M 675A-81 #16 1015 black, white and green

F13200810025-M 675-81 6” #14/#18 1015 with #10 ring lug on green wire

5/16

1- 3/163/16

1- 1/16

1- 1/16

25/32 19/32

675

675-81

Wcassem

Text Box

Wcassem

Text Box



675 Series U-Ground Snap-In Outlets

These snap-in outlets feature tempered-steel clips with corrosion-resistant finish to accommodate any material from 0.031 to 0.062” thick. The molded plastic body is available in black phenolic or white urea.

Terminations: Outlets are available in the following combinations: two .250” quick connect tab terminals, one green grounding lead #16 AWM 1015 105°C; two .250” quick connect tab terminals and ground screw; or two #14 AWM 1015 105°C leads and ground screw. For panel thicknesses other than stated, consult factory. When ordered with #18 AWM UL 1015, product is a Recognized Component. Use -341 as suffix when ordering.

For lighting fixtures and major appliances• Meets three-wire code requirements• Snaps-in for easy installation and secure fit•

UL File No. E18457CSA File No. LR60328NEMA 5-15RRated 15A - 125 V

5/16

1- 1/16

1- 1/16

1- 3/16

19/32

3/16

675A


F13200010021-M 675-1 with 6” green #16 1015 strip 1/2”

F13200010022-M 675-1 6- 1/2” green #16 1015 with #10 ring lug

F13200010024-M 675-1 6” green #16 1015 with #10 ring lug

F13200010025-M 675-1 6” green #16 1015 with 263 ring lug


675-1 black Male terminals and #16 green ground leads

675A-1 white Male terminals and #16 green ground leads

675-1

Wcassem

Text Box

Wcassem

Text Box



ZE-204 Series Rocker SwitchesSingle Pole, Single Throw

UL File No. E89885 CSA File No. LR063990

Rocker switches are available in black and white. Standard versions with leads are 6” #18 gauge AWM 1015 105°C tinned inners, stripped 1/2”. Other lead lengths are available upon request, subject to minimum order. On/Off markings are not standard stock, however they are available upon request. Consult factory.


SRK-F11WL6FT 6” length of (2) black #18 UL 1015, 105°C stranded tinned copper strip 0.375” minimum to 0.437” maximum full tinned solder dipped

SRK-M11WL6FT miniature rocker switch with (2) black 6” leads, color white #18 AWM UL 1015 105°C stranded tinned inners, cut the 5/8” strip length down to 3/8”, twist and full tin on 3/8” strip on both ends

0.675

0.390

0.050

0.810

0.544

1.235

0.200

0.860

1.120

ZE-204

ZE-204

Wcassem

Text Box

Wcassem

Text Box



Uninsulated Copper Wire

UL 79D2 Fixture Fitting

Catalog Number AWG Size Stranding Weight LB/M Standard Package

508A 18 7/.0152 Bare 3/8 Lay 5 250’

508S 18 7/.0152 Bare 3/8 Lay 5 1000’

508R 18 7/.0152 Bare 3/8 Lay 5 2500’

518A 18 7/.0152 Bare 3/8 Lay 5 250’

518S 18 7/.0152 Bare 3/8 Lay 5 1000’

518R 18 7/.0152 Bare 3/8 Lay 5 2500’


F20813080001-M 6” #18 bare copper with 01253308SP #8 lug to 1 end

F20813080002-M 6” #18 solid bare copper with 308SP #8 lug to 1 end

F20814070001-M 9” #18 bare copper ground wire with 402SP attached

F20814070002-M 6” #18 bare copper ground with 402SP lug attached

F20814070005-M 8” #18 solid bare copper with 402SP lug to 1 end

F20816320001-M 6” bare copper ground with 012-53263 lug

F20816320002-M 18” #18 bare copper wire with #6 lug (012-53263)

F20816320004-M 12” #18 bare copper wire with #6 lug (012-53263)

F20818320014-M 8” #18 bare copper ground wire with 8-32 lug, #8 attached on 1 end

F20818320016-M 16” #18 bare copper ground with 8-32 lug, #8 on 1 end

F20818320017-M 18” bare copper with 012-53304SP #8 lug

F20826100001-M 6” bare copper ground with 012-53261 lug attached

F28026100002-M 6” #18 tinned copper wire and crimp on an 012-53261 lug

F20826100003-M 6” bare copper ground with 012-53261 lug attached and dip tin7/8”

F20826100004-M 6” #18 solid bare copper with 261SP lug to 1 end

F2081LUG0001-M 8” #18 bare copper ground with 1/8 I.P. lug

F2081LUG0005-M 12” #18 bare copper ground with 1/8 I.P. lug

F2081LUG0023-M 1/8 I.P. ring terminal with 4- 1/2” #18 bare copper lead to #10 ring terminal with 5” to a second #10 ring terminal, and 5” #18 bare copper off the second ring terminal

F2081LUG0036-M 9” #18 bare copper with 1/8 I.P. lug

F20810000005-M 6- 1/2” stranded bare copper without terminal

Wcassem

Text Box

Wcassem

Text Box



AWM Style 1015 Single Conductor

AWM Style #1015Rated 105°C - 600VCSA Type TEWUnderwriters’ Laboratories RecognizedCSA Certified

Appliance Wiring MaterialConductor: Solid or stranded bare or stranded tinned copper Insulation: PVC

Catalog

Number

AWG

Size

Inches

Thick

Stranding Approximate

O.D.

Weight

LB/M

Standard

Package

Standard

Carton

208S 18 0.031 16/30 0.107 10 500’ 2000’

208R 18 0.031 16/30 0.107 10 5000’ -

228S 18 0.031 SOLID 0.105 10 500’ 2000’

228R 18 0.031 SOLID 0.105 10 5000’ -

206S 16 0.031 26/30 0.123 14 500’ 2000’

206R 16 0.031 26/30 0.123 14 4000’ -

226S 16 0.031 SOLID 0.128 14 500’ 2000’

226R 16 0.031 SOLID 0.128 14 4000’ -

204S 14 0.031 41/30 0.139 20 500’ 1000’

204R 14 0.031 41/30 0.139 20 4000’ -

224S 14 0.031 SOLID 0.128 20 500’ 1000’

224R 14 0.031 SOLID 0.128 20 4000’ -


F21600200024-M 18” white #18 AWM 1015 solid strip 3/8” both ends

F21600300079-M 12” red #18 AWM 1015 solid strip 3/8” both ends

F21600300107-M 8” red #18 AWM 1015 solid strip 3/8” both ends

F21600400012-M 12’ blue #18 AWM 1015 solid plastic strip 3/8” on both ends

F21600400068-M 8” blue #18 AWM 1015 solid strip 3/8” both ends

F21600500007-M 6” green #18 AWM 1015 strip 3/4” with #6 lug

F21600500127-M 6” green #18 AWM 1015 strip 3/8” with #6 lug, twist and full dip tin

F21600500130-M 9” #18 1015 VW BC green strip 1/4” 1 end other end #6 lug

F21600500131-M 12” #18 SBC green 1015, with #8 ring lug X strip 1/2”

F21600500132-M 9” green #18 AWM 1015 with 01253271 lug on both ends

F21600500134-M 8- 1/2” white #18 AWM 1015 with #10 terminal on both ends

F21600700004-M 18” yellow #18 AWM 1015 solid strip 3/8” both ends

F21600100120-M 18” black #18 TFN SBC strip 3/8” both ends


F21600700109-M 12” yellow #18 AWM 1015 SBC, strip 3/8” both ends


F23820029000-D blue #18 solid bare copper 105°C on 5000 foot reel

F23820034000-D red #18 solid 1015 DEG with bare copper inners on 5000 foot reel

solid

stranded

lugs

Wcassem

Text Box

Wcassem

Text Box



AWM Style XFF Single Conductor

AWM Style #XFFRated 150°C - 600VCSA Type CL - 3321Underwriters’ Laboratories RecognizedCSA Certified

AWM Thermoplastic Elastomer

Catalog

Number

AWG

Size

Inches

Thick


O. D.

590S 18 0.031 16/30 0.110

590R 18 0.031 16/30 0.110


F21600100021-M 28” black #18 XFF 150°C, strip 3/16” x 3/8”

F21600100022-M 15” black #18 XFF 150°C, strip 3/16” x 3/8”

F21600100060-M 12” black #18 XFF 150°C, strip 3/8” both ends

F21600200022-M 23- 5/8” white #18 XFF 150°C, strip 3/16” x 3/16”

F21600200040-M 12” white #18 XFF 150°C, strip 3/8” both ends

#18 XFF

Wcassem

Text Box

Wcassem

Text Box



Style SF-1 and SF-2 Single Conductor

Type UL SF-1,CSA SEW-1 200°C 300VUL SF-2CSA SEW-2 200°C 600V

Silicone Rubber Insulated Fixture with Fiberglass Braid

Catalog Number AWG

Size

Inches

Thick


O. D.

Weight

LB/M

Standard

Package

SF-1488S 18 0.016 7 x 0.0152 0.098 9 500’

488R 18 0.016 7 x 0.0152 0.098 9 5,000’

SF-2498S 18 0.031 7 x 0.0152 0.128 12 500’

498R 18 0.031 7 x 0.0152 0.128 12 5,000’

SF-2496S 16 0.031 7 x 0.0192 0.137 18.5 500’

496R 16 0.031 7 x 0.0192 0.137 18.5 4,000’

SF-2494S 14 0.031 7 x 0.0242 0.153 25 500’

494R 14 0.031 7 x 0.0242 0.153 25 3,500’


F21600200042-M 14” white #18 SF-1 strip 1/2” and full dip, tin, cut 2nd. end blunt

F23820007000-D 18 SF-1 white 7,500/RL

F23820008000-D green #18 SF-1/SEW-1 200°C on 5,000 foot reel

F23820024000-D black #18 SF-2/SEW-2 200°C on 5,000 foot reel

F23820025000-D white #18 SF-2/SEW-2 200°C on 5,000 foot reel

Conductor: Stranded tinned copper Insulation: Silicone rubber Braid: Fiberglass

style #18 SF-1

style #16 SF-2

Wcassem

Text Box

Wcassem

Text Box



Harness Assembly

Labelled AWM Style 1015 14 AWGRated 105°C 600VRecognized Component Connector Molex Series 1396Rated 350 volts


F21602040000-M 12- 1/2” harness 3-wire black, white and red

F21602040001-M 12- 1/2” harness 2-wire black and white

F21602040002-M 12- 1/2” harness 2-wire orange and gray

2-wire black & white 2-wire range & gray 3-wire black, white & red

Wcassem

Text Box

Wcassem

Text Box

Documents

620 Series Medium Bi-Pin Fluorescent Quickwire Lampholderstriboro-usa.com/pdf/SB-Catalog-2010.pdf · A.L.P. Lighting Components, Inc. Tel: (877) 257-5841 † Fax: (800) 438-2500 630