Provides reverse polarity protection, eliminates sparking and protects against many forms of operator error.

AUTOMATIC OPERATION Just connect the unit, choose your battery voltage and type, and the maintainer does the rest!

The multi-phase PRO-LOGIX charging process ensures optimal energy delivery to each battery charged. Its maintenance mode routine is less stressful than alternative approaches, ensuring that batteries on extended seasonal charge are kept fresh and ready for service. The PRO-LOGIX routine even exercises the battery to properly prepare it for the maintenance charge.

BENEFICIAL CHARGING /SUPERIOR LONG TERM CHARGING

UL-approved

SEALED CASEKeeps dust and debris out of

the maintainer for durability and long life.

SMART CLAMP TECHNOLOGY

ETL-approved

PL2140 - 6/12 VOLT, 4.0 AMPBATTERY CHARGER/MAINTAINER

© Clore Automotive 2013Clore Automotive | 800.328.2921 | www.solaronline.com

© 2014 Clore Automotive

The SOLAR PRO-LOGIX PL2140 automatic battery charger / maintainer utilizes an advanced multi-phase charging process to deliver an optimal charge to each battery serviced, regardless of battery size or type. No guesswork or mystery... if it is a lead-acid battery installed in a vehicle, it can be charged and charged right with PRO-LOGIX. Two tools in one, the PL2140 functions as an advanced automatic battery charger to immediately bring depleted batteries to full charge, plus it functions as an advanced automatic battery maintainer, conditioning and maintaining batteries in long term storage.

PHASE 1 PHASE 2 PHASE 3 PHASE 4 PHASE 5 PHASE 6 PHASE 7ENERGIZING FAST CHARGE ABSORPTION COMPLETION RESTORINGRESTING EXERCISING

14

12

10

8

6

4

2

0

VOLTAGE CURRENTMULTI-PHASE CHARGING PROCESSV

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.0

CONSTANT CURRENTCONSTANTVOLTAGE

STATUS INDICATORS

CHARGING

COMPLETE

ON

OFF

ON

OFF

FLASHING

ON

OFF

SLOWLY FLASHINGALTERNATING

FLASHINGSEE PHASE 2-4

FOR INDICATION

ON

OFF

-1.0

PL2140 - 6/12 VOLT, 4.0 AMPBATTERY CHARGER/MAINTAINER

The PL2140 can be pro-grammed to recover auto-matically from power outages, eliminating the need to reset the charger. It can also oper-ate in Standard Mode, which would require resetting the charger after a power interruption. This puts you in control – allowing you to configure the charger exactly as you prefer.

© Clore Automotive 2013Clore Automotive | 800.328.2921 | www.solaronline.com

© 2014 Clore Automotive L00514

Recovery Mode

With a convenient quick attach cord on the output side, the maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps, ring terminals and 12V male adapter.

Versatile Charging

Compatible with a wide variety of battery types, including Conventional, AGM, Gel Cell, Spiral Wound, Deep Cycle and Marine batteries. If it is a 6 or 12 Volt lead acid battery installed in a vehicle, boat or implement, the PL2140 can charge and maintain it properly to ensure that it is ready when you need it next.

Charges Mulitple Battery Types

The PL2140 features Battery Repair and Soft Start modes, which automatically commence when needed, to effectively manage sulfated or deeply discharged batteries. When attempting to charge a severely discharged battery, where the battery’s charge is too low for the charger to activate, the operator can force the charger to start charging, avoiding the “dead battery dilemma.”

Battery Repair Mode

BATTERY

BR REP AIR