Upload
buinhan
View
218
Download
1
Embed Size (px)
Citation preview
“Bringing You & Technology Together“
5th
GENERATION
“WASTE TYRE RECYCLING PLANT”
Registered Office: 520-527 Poddar Arcade, Khand Bazaar,
Varachha Road, Surat 395 006 (Guj) India
Contact Numbers: +91 261 2554150/51/52 Fax: +91 261 2554149
10 TON PLANT PROJECT REPORT
Company Profile:
Anjali Exim with its unique renewable technology has come up with a concept of setting new
standard in renewable energy that includes using of waste tyres as a raw material and producing
green fuel oil, carbon black, steel and gas. With global warming and utilization of rubber, it has
now become necessary to recycle the waste and convert it in fuel oil in such a way that it is
environment friendly. This is a unique technology and can be change energy market scenario in a
big way.
Anjali Exim has a team of experienced and expert recycling, consulting and marketing
Professionals that work hard for obtaining renewable energy from the waste. Our professionals
have worked in different countries. We are also working in the sector of laser systems, solar
panel, and textile and construction business.
World Market Scenario:
Billions of wastages are available in all over the world. We can’t burn or land fills that tyres due
to pollution problems. There is no any other use of these waste tyres. So, we at Anjali Exim have
found a solution for this wastage tyre. We separate all content from wastage tyres and make it
complete renewable process.
Features of the plant:
� 100% wastage tyre recycling is achieved (No churn left after the process)
� No chemical ingredients are used in process (environment friendly)
� During and after the process; no soil, water or air pollution is observed.
� Creates economically valuable products out of wastage tyres (These are an industrial
product that have a good market value and demand)
� The most cost-effective wastage tyre recycling technology in the world.
� Raw material (wastage tyre) is cheap and easy to provide. These are the by-products of
tyre production.
� Each recycled ton of tyres preserves 10 tons of CO2 that is a major green house gas.
� The process can be applied to all rubber based materials.
� The system creates an alternate source of energy to replace petroleum products and
natural gas.
� System gives the opportunity to governments and local administrations to deal with the
wastage tyre problem to a great extent.
� The process of Pyrolysis has duration of 4 to 12 hours, depending on the quantity and
size of tyre (car tyre, truck tyre, etc.). During the process different vacuum values are
applied in pre-determined temperatures and in different phases. Different gases are
obtained and the condensed gas is stored as a fuel-oil in tanks.
The Features of the Fifth Generation Plant
Item. Picture. Features.
Catalyst
Room
Two catalyst room, in this way, can
speed up the process of pyrolysis.
Horizontal
Condensor
Two horizontal condenser, the cooling
area of one horizontal condenser can be
equaled with more than three vertical
condensers. And also, the cooling way is
longer than vertical condenser, in this
way, the oil output will be guaranteed.
Vertical
Condensor
Another two length cooling pipes, the
cooling area can be equaled with one
vertical condenser, in this way, the
cooling result will be better than our
fourth Generation.
Anti back
devices
Two anti back fire devices, it is our
second water seal, and also reuse the
exhaust gas as burning material, two anti
back fire device, more safety, more
energy saving.
The exhaust
Gas
From the picture, you can see the
exhaust gas, it is white, no pollution,
even if you put a white towel on it you
cannot see any black. It can meet the
emission standard of international
required.
The Perfect Solution (Pyrolysis Process):
Pyrolysis is the decomposition of organic compounds under oxygen free (anaerobic)
atmosphere that produces gas, oil, carbon black and steel. Efficient industrial Pyrolysis is a
process to treat the rubber and industrial plastic wastage as well.
As a result of pyrolysis of wastage tyres one obtains,
� FUEL OIL (45% to 50%)
The main oil product produced by our recycling application is the fuel oil that is wide
used for industrial and commercial purposes. The oil has 45% to 50% of the amount of recycled
scrap tyres, which will be carried with licensed tanker trucks.
� CARBON BLACK (30% to 35%)
Carbon Black is the main product recycled by Pyrolysis technology. The amount of
recycled carbon black is 30% to 35% (depending on the type of tyres) of the total amount of
scrap tyres recycled in the system. Carbon black is used as raw material or main ingredient in
many industries and the chemical structure of carbon black strengthens, lengthens the
endurance, and improves the coloring features of the materials.
Carbon black produced by Pyrolysis process (CBp) is more economical compared to
carbon black produced primarily from petroleum and is more price-efficient to be used as an
ingredient in the industries listed;
� Electric cable jacketing
� Conveyor band
� Carrier Bands
� Hose and doormat
� Black nylon bag, Plastic pipes
� Rubber additive
� Automotive spare parts
� Black colorant in rubber materials
� Industrial rubber products
� Fire fighting
� STEEL WIRE (10% to 15%)
Tyres contain steel wires and the amount range of 10% to 15% of the total tyre wastage.
All of the steel present in the tyre can be detached after the Pyrolysis recycling process is
completed. Valuable steel wires are pressed and sold to steel and scrap dealers.
� GAS (5% to 8%)
Non-Condensable gases arise during the pyrolysis process. There are some advantages
such as…..
• It has higher calorific value as compared to natural gas.
• It can be replaced where natural gas and propane are stored.
• The high energy gas may be utilized as a source of energy for the Pyrolysis
process.
• The amount of gas generated in the system is 5% to 8% of the total amount of
recycled tyres and considering the 10 ton scrap tyre/day recycling capacity, the
facility generates 500 - 800 m³/day gas, which has an enormous energy potential
when evaluated.
5th Generation Plant Photo:
PYROLYSIS CARBON BLACK TEST REPORT:
PYROLYSIS FURNACE OIL TEST REPORT:
Technical Detail:
� This is a batch process system.
� The wastage tyres are fed into the reactor vessel and heated under controlled conditions
of temperature and pressure.
� The process will bring about molecular restructuring of the rubber under the pyrolysis
process as the result; furnace oil in gaseous form is produced along with other gases.
� These vaporized gases are passed through heat exchanges, where in the furnace oil is
condensed into liquid form.
� During the process, carbon black and steel are also generated.
� The heat exchanger uses coolant water, as a condensing medium and this water is re-
circulated through process.
� These systems can be operated 24/365.
AZ – 150 Tyre Recycling Plant:
AUTO FEEDAR:
CARBON REMOVAL SYSTEM:
Process Flow Chart:
Scrap Tire
Stocking
Pyrolysis Unit
Oil Carbon Black Steel Wire Gas
Storage Sleve Sleve Burning Unit
Transfer to
Refinery
Carbon Black Storage Chimney
Storage
Magnet
Grinding System
Packing
Stowing
Sale to Market
Pressing
Transfer to
Scrap Dealer
Technical Parameter:
Project ( Dimension : 6.6 *2.6m)
Sr. No. Equipment Specification
1 Equipment Model AZ-150
2 Material Plastic rubber (tyres) life garbage
3 Structure Horizontal tyre revolves
4 Capacity For One Batch About 8-10 tons wastage tyres
5 Oil Yield 45%-50%
6 Carbon Black 30%-35%
7 Steel Wire 10%-15%
8 Gas 5%-8%
9 Work Pressure Normal
10 Main Engine Rotation Speed 0.4 RPM
11 Fuels Choice Coal, Wood, Gas, Oil
12 Power About 35 HP
13 Cooling Method Water
14 Cooling Water Consumption(T/H) Cyclic
15 Type Of Drive External Annual Gear Drive
16 Heating Method Direct
17 Type Of Installation With Foundation
18 Operating Mode Intermittent Operation
19 Reactor Dimension (MM) (Long*Diameter) 6600*2600
20 Reactor Weight About 22000 Kg.
21 Total Weight About 32 MT
5th
Equipment List
D = Diameter L = Length H = Height W = Wide
Name Weight Size (MM) Quantity Picture
Reactor 22000kg D2600*6600 1
Catalyst Chamber H2100*L1800 1
Oil Water
Separator D1200*H2100 1
Oil Tank D1000*L3200 2
Horizontal
Condenser D1050*L400 2
Vertical
Condenser 300kg D800*L2600 1
Anti-back fire
device 50 kg D400*H1350 2
Buffer Tank 50 Kg D550*H1350 1
Negative Pressure
Device 890 Kg H2050*W2000 1
Water Jet Flue D500*L4000 1
Dust Removing
device 2000kg H1250*L2950 1
Draught Fan L950*W800 1
Chimney 200kg 1
Auto Feedar 400Kg L4700*W1200*H2150 1
Releted link pipe
Difference Between Fourth Generation And Fifth Generation Tyre Pyrolysis Plant
Name 5th
Generation Tire Pyrolysis Plant 4th
Generation Tire Pyrolysis
Plant
Catalyst
Chamber
We call the 5th
catalyst chamber “double chamber “. This design could add the molecular
sleve , which increase the oil quantity, beside these are two catalyst chamber could reach
double effect of catalytic pressure and remove the slag from the oil gas.
Oil Water
Separator
The Oil Water Separator new design could have the colling cover that cool the gas so that
decrease the temperature of the oil gas, than the oil gas could be more easily collected in
next stage.
Condenser
The condensers are changed as horizental , this could incersase the colling area, so that
more oil gas could be colleted , thes the oil yiekd are higher the oil yield rate could reach
53%.
Oil Tank
The oil capacity is bigger than tha 4th
generation and it could be equipped with the
automatic pumping system.
Anti – back
fire Device
Double anti-back fire device could be recyeled the tail gases more sufficently so that the
reactor could burn more gases us fule to save energy and will not pollute the air , so that
more enviromental friendly. Also there are two pipes colling the tall gas to that more safe, as
the fule gas are usally methane , eathane, hydrogen etc, if the temperature is so high then it
easy to blast.
Carbon
black
Removing
Equipment
Our R&D department invent this bucket elevator to lift the carbon black into the come pool
automatically, there is no need manpower ot lift, and also there is a screw conveyor to cool
the hot carbon black then this save time to collect the carbon black.
Electric
Controller
5th
generation electric has two function, one is the control the power and another showing
the temprature of the oil out, 4th
generation electric could only control the power.
Project Planning & Implementation (For the 10 ton/day capacity):
Land Requirement : 1500 sq. meters
Construction Shade : 40Ft * 80 Ft = 3200 Sq.Feet
Water Required : 100 liter per day
Power Requirement
Without Autofeeder : 20 hp
With Autofeeder : 35 hp
Man Power Planning : Manager-2
Technical-1
Worker-4
Capital investment:
Other Arrangements to be made by Client Storage tank Of oil (Available locally),Civil Work, Local Worker & labor
Terms & Condition: Delivery Time :Chinese plant 30 days from your order confirmation
Installation Period :15 days
Warranty Period :1 Year
After Sales Service :1st
Year Free Service after then AMC Based…
Installation, Training & :Inclusive in price.
Particular Investment
Building and land (1500sq.meter with 600sq.meter shade) Depend on the area
CHINESE PLANT
Price of the Plant (Ex – Factory China) 5th
Generation With
Auto feeder
( Dimension:2.6*6.6MT)
70,000 USD
Price of the Plant (Ex– Factory China) 5th
Generation Without
Auto feeder
( Dimension:2.6*6.6MT)
64,000 USD
Custom Duty 26%, Fright, Container Clearing Charges,
Transportation Extra.
Shredder Price ( 2 ton/ hr Capacity) Rs. 25 Lakhs
This does not include the rate of interest on capital investment.
Estimated Operational Cost and Return on Investment:
The analysis is based on the conjecture of 10 tons/day capacity unit operating for 300 days a
year;
Raw material waste Tyre: 8 ton per day*300 days = 2400 ton/ year.
Total output:
• Carbon black (35%) - 840 Ton (Rs 1,000 per Ton in India)
• Furnace oil (45%) - 1080 Ton (Rs 38,000 per Ton in India)
• Steel (12%) - 288 Ton (Rs 12,000 per Ton in India)
• Gas (8%) - 192 Ton (We are not considering price of it right now)
Total Earning: (Yearly) (Unit: Tons)
Sr. No Product Output (%) Output (Ton) Price Per ton. Total Income
1 Carbon Black 35% 840 1,000 8,40,000
2 Furnace oil 45% 1080 38,000 4,10,40,000
3 Steel 12% 288 12,000 34,56,000
4 Gas 8% 192 --- 0
Total (A) 4,53,36,000
Total Expense: (Yearly) (Unit: Tons)
Sr. No Particular Quantity Price Total Cost
1 Waste Tyres 2400 10,000 2,40,00,000
2 Salary & Wages 9*12 Month 10000 10,80,000
3 Fuel (For Initial Use) 300 5000 15,00,000
4 Electricity + Water --- -- 7,20,000
5 Misc. Expense
(Bag Packing, Repairing, Renovation)
--- -- 9,50,000
Total (B) 2,82,50,000
Profit (Earning – Expense) (A-B) 1,70,86,000
Shredder Cost/ ton:
1) Cost of machine: Rs. 25 Lakhs
2) Capacity: 48 ton/ day.
3) Electricity consumption: 60 Hp.
4) Labour = 3
Estimated Operational Cost:
Capacity Utilization = 10 hr/ day
Total Expense: (Yearly) (Unit: Tons)
Sr. No Particular Quantity Price Total Cost
1 Electricity consumption 48 Hp Rs.11,00,000
2 Salary & Wages 3*12 Month 10000 Rs. 3,60,000
Total Rs. 14,60,000
Total Cost Rs. 14,60,000
• Plant require: 6000 ton/ Year.
• So, per ton cost of shredding is Rs. 243/ ton.
520-527, PODDAR ARCADE,
KHAND BAZAAR, VARACHHA ROAD,
SURAT, 395006
GUJARAT, INDIA. Phone: +91 261 2554152 Fax: +91 261 2554149
Web: www.anjaliexim.com
Email: [email protected]
Thank You . . . !